Skip to contentSkip to conversation

sunxi: Add q8_a13_tablet defconfig and dts

PATCH New Hans de Goede 2 participants 2 messages Sep 5, 2015 – Sep 9, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 sunxi: Add q8_a13_tablet defconfig and dts

This commits adds a generic support for q8 formfactor a13 based tablets.

These tablets ship in many variants, with the difference mainly being the touchscreen controller / accelerometer / wifi chip used.

The wifi is USB based, and thus not listed in devicetree.

ATM the kernel does not support the touchscreen / accelerometer on these devices. In the future we may need multiple configs with different CONFIG_DEFAULT_DEVICE_TREE settings, this depends on how we solve the hw differences on the kernel side.

For now this will suffice.

The dts files are identical to the dts files submitted to the upstream kernel for these tablets.

---
 arch/arm/dts/Makefile                |   1 +
 arch/arm/dts/sun5i-a13-q8-tablet.dts |  60 +++++++++++++
 arch/arm/dts/sun5i-q8-common.dtsi    | 170 +++++++++++++++++++++++++++++++++++
 arch/arm/dts/sunxi-q8-common.dtsi    |  77 ++++++++++++++++
 board/sunxi/MAINTAINERS              |   1 +
 configs/q8_a13_tablet_defconfig      |  23 +++++
 6 files changed, 332 insertions(+)
 create mode 100644 arch/arm/dts/sun5i-a13-q8-tablet.dts
 create mode 100644 arch/arm/dts/sun5i-q8-common.dtsi
 create mode 100644 arch/arm/dts/sunxi-q8-common.dtsi
 create mode 100644 configs/q8_a13_tablet_defconfig
arch/arm/dts/Makefile +1 -0
index 52b6275..275948d 100644
@@ -103,6 +103,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \
 	sun5i-a13-inet-98v-rev2.dtb \
 	sun5i-a13-olinuxino.dtb \
 	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-q8-tablet.dtb \
 	sun5i-a13-tzx-q8-713b7.dtb \
 	sun5i-a13-utoo-p66.dtb \
 	sun5i-r8-chip.dtb
arch/arm/dts/sun5i-a13-q8-tablet.dts new file +60 -0

60 lines not on this page · raw message

arch/arm/dts/sun5i-q8-common.dtsi new file +170 -0

170 lines not on this page · raw message

arch/arm/dts/sunxi-q8-common.dtsi new file +77 -0

77 lines not on this page · raw message

board/sunxi/MAINTAINERS +1 -0
index 3f897f8..7f29b58 100644
@@ -24,6 +24,7 @@ F:	configs/Auxtek-T003_defconfig
 F:	configs/Auxtek-T004_defconfig
 F:	configs/inet98v_rev2_defconfig
 F:	configs/mk802_a10s_defconfig
+F:	configs/q8_a13_tablet_defconfig
 F:	configs/r7-tv-dongle_defconfig
 F:	configs/UTOO_P66_defconfig
 F:	include/configs/sun6i.h
configs/q8_a13_tablet_defconfig new file +23 -0
new file mode 100644
index 0000000..d38e41f
@@ -0,0 +1,23 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN5I=y
+CONFIG_DRAM_CLK=384
+CONFIG_DRAM_EMR1=0
+CONFIG_MMC0_CD_PIN="PG0"
+CONFIG_USB0_VBUS_PIN="PG12"
+CONFIG_USB0_VBUS_DET="PG1"
+CONFIG_USB0_ID_DET="PG2"
+CONFIG_AXP_GPIO=y
+# CONFIG_VIDEO_HDMI is not set
+CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:82,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_POWER="AXP0-0"
+CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
+CONFIG_VIDEO_LCD_BL_PWM="PB2"
+CONFIG_USB_MUSB_HOST=y
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-q8-tablet"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
Signature · 1 line
2.4.3
#1 lore raw

PATCH 1/1 sunxi: Add q8_a13_tablet defconfig and dts

Quoted 15 lines · Hans de Goede

This commits adds a generic support for q8 formfactor a13 based tablets.

These tablets ship in many variants, with the difference mainly being the
touchscreen controller / accelerometer / wifi chip used.

The wifi is USB based, and thus not listed in devicetree.

ATM the kernel does not support the touchscreen / accelerometer on these
devices. In the future we may need multiple configs with different CONFIG_DEFAULT_DEVICE_TREE settings, this depends on how we solve the hw differences on the kernel side.

Quoted 7 lines

For now this will suffice.

The dts files are identical to the dts files submitted to the upstream
kernel for these tablets.