Update Freescale packages to 3.14.28-1.0.0_ga
cover Update Freescale packages to 3.14.28-1.0.0_ga
Hi all,
Here is the usual update for all Freescale packages.
Once again I didn't bump most packages to the latest versions as they rely on 3.14.38 kernel which is still in Beta version.
Also to be noted that the GPU libraries work for both kernel 3.14.28 and 3.10.53.
Regarding the VPU, Baruch took care of the update. I've applied his patches for my testing.
http://patchwork.ozlabs.org/patch/513580/
http://patchwork.ozlabs.org/patch/513579/
Another note on the kobs package, I decided to remove the old package and create a new one as I'm not sure of the history of that tool. My understanding is that kobs-ng was more or less maintained by Timesys where imx-kobs is now provided by Freescale. But I might be wrong on that one, let me know if you'd prefer to rename the package instead.
As Thomas suggested, I've integrated my testing commands into the git log messages directly so everybody can benefit from it. All the testing was done on a Nitrogen6X with the following configuration:
BR2_arm=y
BR2_cortex_a9=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TARGET_OPTIMIZATION="-pipe"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/boundarydevices/nitrogen6x/post-build.sh"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
# Last version of branch boundary-imx_3.14.28_1.0.0_ga BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/tarball/3417c66/linux-imx6-3417c66.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="nitrogen6x"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-nit6xlite imx6dl-nitrogen6_vm imx6dl-nitrogen6x imx6q-nitrogen6x imx6q-nitrogen6_max imx6q-sabrelite" BR2_LINUX_KERNEL_INSTALL_TARGET=y
BR2_PACKAGE_GSTREAMER=y
BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_AUDIOTESTSRC=y
BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_VIDEOTESTSRC=y
BR2_PACKAGE_GST_PLUGINS_GOOD=y
BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_AUTODETECT=y
BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_ID3DEMUX=y
BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_MATROSKA=y
BR2_PACKAGE_GST_FSL_PLUGINS=y
BR2_PACKAGE_GSTREAMER1=y
BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_AUDIOTESTSRC=y
BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_VIDEOTESTSRC=y
BR2_PACKAGE_GST1_PLUGINS_GOOD=y
BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_AUTODETECT=y
BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_ID3DEMUX=y
BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_MATROSKA=y
BR2_PACKAGE_GST1_IMX=y
BR2_PACKAGE_GST1_LIBAV=y
BR2_PACKAGE_STRACE=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR=y
BR2_PACKAGE_XDRIVER_XF86_INPUT_EVDEV=y
BR2_PACKAGE_XDRIVER_XF86_VIDEO_IMX_VIV=y
BR2_PACKAGE_XTERM=y
BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Q=y
BR2_PACKAGE_IMX_GPU_VIV=y
BR2_PACKAGE_IMX_GPU_VIV_EXAMPLES=y
BR2_PACKAGE_I2C_TOOLS=y
BR2_PACKAGE_PYTHON=y
BR2_PACKAGE_PYTHON_CFFI=y
BR2_PACKAGE_PYTHON_SETUPTOOLS=y
BR2_PACKAGE_LIBSHA1=y
BR2_PACKAGE_TIFF=y
BR2_PACKAGE_OPENSSH=y
BR2_PACKAGE_RSYNC=y
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BOARDNAME="nitrogen6q"
BR2_TARGET_UBOOT_CUSTOM_TARBALL=y BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="http://github.com/boundarydevices/u-boot-imx6/tarball/5115a9e/u-boot-5115a9e.tar.gz" BR2_TARGET_UBOOT_FORMAT_IMX=y
BR2_PACKAGE_HOST_E2FSPROGS=y
BR2_PACKAGE_HOST_GENEXT2FS=y
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
Regards,
Gary
Gary Bisson (14):
freescale-imx: bump to 3.14.28-1.0.0_ga release
kobs-ng: remove obsolete package
imx-kobs: add new package
imx-gpu-viv: bump version to 5.0.11 p4.5 xdriver_xf86-video-imx-viv: bump to version 5.0.11 p4.5
libfslcodec: bump version to 4.0.3
libfslparser: bump version to 4.0.3
libfslvpuwrap: bump version to 1.0.58
gst-fsl-plugins: bump version to 4.0.3
gst1-imx: bump version to 0.11.1 freescale_imx6*_defconfig: bump version to 3.14.28-1.0.0_ga
qmx6_defconfig: bump version to 3.14.28_1.0.0
nitrogen6x_defconfig: bump version to 3.14.28-1.0.0 board/boundarydevices: update u-boot script for 3.14 kernels
board/boundarydevices/nitrogen6x/6x_bootscript.txt | 223 ++++++++------------- configs/freescale_imx6dlsabreauto_defconfig | 8 +- configs/freescale_imx6dlsabresd_defconfig | 8 +- configs/freescale_imx6qsabreauto_defconfig | 8 +- configs/freescale_imx6qsabresd_defconfig | 8 +- configs/freescale_imx6sololiteevk_defconfig | 4 +- configs/nitrogen6x_defconfig | 11 +- configs/qmx6_defconfig | 12 +- package/Config.in | 1 - package/freescale-imx/Config.in | 1 + .../freescale-imx/firmware-imx/firmware-imx.hash | 2 + package/freescale-imx/firmware-imx/firmware-imx.mk | 2 +- package/freescale-imx/freescale-imx.mk | 2 +- package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash | 3 + package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk | 2 +- package/freescale-imx/imx-kobs/Config.in | 10 + package/freescale-imx/imx-kobs/imx-kobs.hash | 2 + package/freescale-imx/imx-kobs/imx-kobs.mk | 12 ++ package/freescale-imx/imx-lib/imx-lib.hash | 2 + .../gstreamer/gst-fsl-plugins/gst-fsl-plugins.hash | 2 + .../gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk | 2 +- package/gstreamer1/gst1-imx/gst1-imx.mk | 2 +- package/kobs-ng/0001-fix-mtd-defines.patch | 73 ------- package/kobs-ng/Config.in | 9 - package/kobs-ng/kobs-ng.hash | 2 - package/kobs-ng/kobs-ng.mk | 13 -- package/libfslcodec/libfslcodec.hash | 2 + package/libfslcodec/libfslcodec.mk | 4 +- package/libfslparser/libfslparser.hash | 2 + package/libfslparser/libfslparser.mk | 4 +- package/libfslvpuwrap/libfslvpuwrap.hash | 2 + package/libfslvpuwrap/libfslvpuwrap.mk | 4 +- .../xdriver_xf86-video-imx-viv.hash | 2 + .../xdriver_xf86-video-imx-viv.mk | 2 +- 34 files changed, 168 insertions(+), 278 deletions(-) create mode 100644 package/freescale-imx/firmware-imx/firmware-imx.hash create mode 100644 package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash create mode 100644 package/freescale-imx/imx-kobs/Config.in create mode 100644 package/freescale-imx/imx-kobs/imx-kobs.hash create mode 100644 package/freescale-imx/imx-kobs/imx-kobs.mk create mode 100644 package/freescale-imx/imx-lib/imx-lib.hash create mode 100644 package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.hash delete mode 100644 package/kobs-ng/0001-fix-mtd-defines.patch delete mode 100644 package/kobs-ng/Config.in delete mode 100644 package/kobs-ng/kobs-ng.hash delete mode 100644 package/kobs-ng/kobs-ng.mk create mode 100644 package/libfslcodec/libfslcodec.hash create mode 100644 package/libfslparser/libfslparser.hash create mode 100644 package/libfslvpuwrap/libfslvpuwrap.hash create mode 100644 package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.hash
Signature · 1 line
2.5.1
PATCH 1/14 freescale-imx: bump to 3.14.28-1.0.0_ga release
Add hash files for the updated packages.
Also update the license of firmware-imx.
This patch is based on the Yocto equivalent:5521d77c9f191b5808cb3bad4af9484ac
Those packages have been implicitely tested through gstreamer as the plugins rely on them for vpu decoding for instance:
# gst-launch-0.10 playbin # uri=file:///root/tears_of_steel_1080p.webm # gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm # gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \ matroskademux ! imxvpudec ! imxipuvideosink
--- package/freescale-imx/firmware-imx/firmware-imx.hash | 2 ++ package/freescale-imx/firmware-imx/firmware-imx.mk | 2 +- package/freescale-imx/freescale-imx.mk | 2 +- package/freescale-imx/imx-lib/imx-lib.hash | 2 ++ 4 files changed, 6 insertions(+), 2 deletions(-) create mode 100644 package/freescale-imx/firmware-imx/firmware-imx.hash create mode 100644 package/freescale-imx/imx-lib/imx-lib.hash
package/freescale-imx/firmware-imx/firmware-imx.hash new file +2 -0
@@ -0,0 +1,2 @@ +# locally computed +sha256 1f09acd4d605efc78a0672068a658cb16274811d2f444cf3ae7aaa075266746f firmware-imx-3.14.28-1.0.0.bin
package/freescale-imx/firmware-imx/firmware-imx.mk +1 -1
@@ -10,7 +10,7 @@ FIRMWARE_IMX_SOURCE = firmware-imx-$(FIRMWARE_IMX_VERSION).bin FIRMWARE_IMX_LICENSE = Freescale Semiconductor Software License Agreement, \ Atheros license (ath6k) -FIRMWARE_IMX_LICENSE_FILES = EULA licenses/vpu/EULA +FIRMWARE_IMX_LICENSE_FILES = EULA COPYING FIRMWARE_IMX_REDISTRIBUTE = NO FIRMWARE_IMX_BLOBS = ath6k sdma vpu
package/freescale-imx/freescale-imx.mk +1 -1
@@ -4,7 +4,7 @@ # ################################################################################ -FREESCALE_IMX_VERSION = 3.10.53-1.1.0 +FREESCALE_IMX_VERSION = 3.14.28-1.0.0 FREESCALE_IMX_SITE = http://www.freescale.com/lgfiles/NMG/MAD/YOCTO # Helper for self-extracting binaries distributed by Freescale.
package/freescale-imx/imx-lib/imx-lib.hash new file +2 -0
@@ -0,0 +1,2 @@ +# locally computed +sha256 46022817d25f154b60247fdcbb87216e23e553bd88ec9664b1b5d5911e7aa2a2 imx-lib-3.14.28-1.0.0.tar.gz
Signature · 1 line
2.5.1
PATCH 2/14 kobs-ng: remove obsolete package
In reply to Gary BissonIn favor of imx-kobs maintained by Freescale.
--- package/Config.in | 1 - package/kobs-ng/0001-fix-mtd-defines.patch | 73 ------------------------------ package/kobs-ng/Config.in | 9 ---- package/kobs-ng/kobs-ng.hash | 2 - package/kobs-ng/kobs-ng.mk | 13 ------ 5 files changed, 98 deletions(-) delete mode 100644 package/kobs-ng/0001-fix-mtd-defines.patch delete mode 100644 package/kobs-ng/Config.in delete mode 100644 package/kobs-ng/kobs-ng.hash delete mode 100644 package/kobs-ng/kobs-ng.mk
package/Config.in +0 -1
@@ -162,7 +162,6 @@ menu "Filesystem and flash utilities" source "package/genext2fs/Config.in" source "package/genpart/Config.in" source "package/genromfs/Config.in" - source "package/kobs-ng/Config.in" source "package/makedevs/Config.in" source "package/mmc-utils/Config.in" source "package/mtd/Config.in"
package/kobs-ng/0001-fix-mtd-defines.patch deleted +0 -73
73 lines not on this page · raw message
package/kobs-ng/Config.in deleted +0 -9
@@ -1,9 +0,0 @@ -config BR2_PACKAGE_KOBS_NG - bool "kobs-ng" - depends on BR2_arm - help - The kobs-ng tool is used for writing images to NAND on i.MX - platforms. - - This utility is provided by Freescale as-is and doesn't have an - upstream.
package/kobs-ng/kobs-ng.hash deleted +0 -2
@@ -1,2 +0,0 @@ -# From http://repository.timesys.com/buildsources/k/kobs-ng/kobs-ng-3.0.35-4.0.0/kobs-ng-3.0.35-4.0.0.tar.gz.md5sum -md5 26104c577f59a6b81782a5bd16aadd82 kobs-ng-3.0.35-4.0.0.tar.gz
package/kobs-ng/kobs-ng.mk deleted +0 -13
@@ -1,13 +0,0 @@ -################################################################################ -# -# kobs-ng -# -################################################################################ - -# kobs-ng versions have never made much sense :( -KOBS_NG_VERSION = 3.0.35-4.0.0 -KOBS_NG_SITE = http://repository.timesys.com/buildsources/k/kobs-ng/kobs-ng-$(KOBS_NG_VERSION) -KOBS_NG_LICENSE = GPLv2+ -KOBS_NG_LICENSE_FILES = COPYING - -$(eval $(autotools-package))
Signature · 1 line
2.5.1
PATCH 2/14 kobs-ng: remove obsolete package
Hi Gary,
package/kobs-ng/Config.in line 9
Quoted 9 lines · Gary Bisson
package/kobs-ng/Config.in deleted +0
-9-config BR2_PACKAGE_KOBS_NG - bool "kobs-ng" - depends on BR2_arm - help - The kobs-ng tool is used for writing images to NAND on i.MX - platforms. - - This utility is provided by Freescale as-is and doesn't have an - upstream.
Please add a Config.in.legacy entry for BR2_PACKAGE_KOBS_NG that selects BR2_PACKAGE_IMX_KOBS. For the sake of bisectability the patch adding imx-kobs should come before this one.
baruch
Signature · 3 lines
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -PATCH 2/14 kobs-ng: remove obsolete package
Hi Baruch,
Quoted 16 lines · Baruch Siach
Hi Gary,
package/kobs-ng/Config.in line 9
Quoted 9 lines · Gary Bisson
package/kobs-ng/Config.in deleted +0
-9-config BR2_PACKAGE_KOBS_NG - bool "kobs-ng" - depends on BR2_arm - help - The kobs-ng tool is used for writing images to NAND on i.MX - platforms. - - This utility is provided by Freescale as-is and doesn't have an - upstream.Please add a Config.in.legacy entry for
BR2_PACKAGE_KOBS_NGthat selectsBR2_PACKAGE_IMX_KOBS. For the sake of bisectability the patch adding imx-kobs should come before this one.
Good catch! I always forget about Config.in.legacy. Will do it in v2 which might happen tomorrow.
Thanks,
Gary
PATCH 3/14 imx-kobs: add new package
In reply to Gary BissonBased on the Yocto 3.14.28-1.0.0_ga update:
https://github.com/Freescale/meta-fsl-arm/commit/6c44744
---
Hi,
This package has only been built as I have no i.MX device that has a NAND Flash.
Regards,
Gary
--- package/freescale-imx/Config.in | 1 + package/freescale-imx/imx-kobs/Config.in | 10 ++++++++++ package/freescale-imx/imx-kobs/imx-kobs.hash | 2 ++ package/freescale-imx/imx-kobs/imx-kobs.mk | 12 ++++++++++++ 4 files changed, 25 insertions(+) create mode 100644 package/freescale-imx/imx-kobs/Config.in create mode 100644 package/freescale-imx/imx-kobs/imx-kobs.hash create mode 100644 package/freescale-imx/imx-kobs/imx-kobs.mk
package/freescale-imx/Config.in +1 -0
@@ -42,6 +42,7 @@ config BR2_PACKAGE_FREESCALE_IMX_PLATFORM default "IMX53" if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX53 default "IMX6Q" if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Q +source "package/freescale-imx/imx-kobs/Config.in" source "package/freescale-imx/imx-lib/Config.in" source "package/freescale-imx/imx-vpu/Config.in" source "package/freescale-imx/firmware-imx/Config.in"
package/freescale-imx/imx-kobs/Config.in new file +10 -0
@@ -0,0 +1,10 @@ +config BR2_PACKAGE_IMX_KOBS + bool "imx-kobs" + depends on BR2_arm # Only relevant for i.MX + help + The imx-kobs tool is used for writing images to NAND on i.MX + platforms. + + This library is provided by Freescale as-is and doesn't have + an upstream. +
package/freescale-imx/imx-kobs/imx-kobs.hash new file +2 -0
@@ -0,0 +1,2 @@ +# locally computed +sha256 cfac042f5c96731205c397a4a6b3ed966f804569ae4d0e2685d22fdf6bdc9eb7 imx-kobs-3.14.28-1.0.0.tar.gz
package/freescale-imx/imx-kobs/imx-kobs.mk new file +12 -0
@@ -0,0 +1,12 @@ +################################################################################ +# +# imx-kobs +# +################################################################################ + +IMX_KOBS_VERSION = $(FREESCALE_IMX_VERSION) +IMX_KOBS_SITE = $(FREESCALE_IMX_SITE) +IMX_KOBS_LICENSE = GPLv2+ +IMX_KOBS_LICENSE_FILES = COPYING + +$(eval $(autotools-package))
Signature · 1 line
2.5.1
PATCH 4/14 imx-gpu-viv: bump version to 5.0.11 p4.5
In reply to Gary BissonAlso add the package hash file.
3.14.28-1.0.1 patch release has the following bug fixes:
MGS-554 [#1644] Fix the false alert with GPU commit dirty MGS-528 [#ccc] Wayland does not free window memory until the application exits
GRPH-56 [#ccc] Add environment variable to turn off memory fill GRPH-55 [ccc] Add alpha channel for direct texture viv extension MA-6540 [#1672] Fix native fence FD leak found by Android? CTS MGS-663 [#1686] P4 release can't be built statically
MA-6527 [#1666] Fix android.webgl.cts.WebGLTest CTS failure MGS-511-2 [#1593] Qt 3D app cannot run on i.MX 6SoloX board MGS-658 [#ccc] Fix build warning of isInApiTraceMode for static link Revert MGS-352 [#1453] Creating context on 5.x is slower than 4.x due to process name
read
MGS-578 [#1657] GoogleEarth APK encounters a shader compile error MGS-507 [#1323] RenderToTexture has distorted pictures on screen in DL board
MGS-547 [#ccc] Add YVYU format test in g2d_overlay_test MGS-547 [#1640] YVYU format gets wrong result when 2D is built MGS-564 [#ccc] Resolve race condition in display frame sync MGS-367 [#1589] "CTRL+C" to close the "tutorial7_es20" causes GPU to hang
MGS-543 [#1604] Remove some unsupported extensions in gles10 MGS-436 [#ccc] Memory leak in glimagesink video loop playback MA-6267 [#1600] Fix ES3.0 benchmark UBenchEnhanced can't run MA-6208-1 [#1543] Fix build error
MA-6208 [#1543] Fix com.drawelements.deqp.gles3 CTS failure MGS-511 [#1593] Qt 3D app cannot run on i.MX 6SoloX board MGS-512 [#1493] Fix es30 conformance failures related to glReadPixels MGS-502 [#ccc] libCLC failure
MGS-500 [#ccc] Disable apitrace for static build
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-freescale/commit/8f74380a
This package has been tested with both X11 and Framebuffer backends:
# cd /usr/share/examples/viv_samples/vdk/ # ./tutorial7
--- package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash | 3 +++ package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk | 2 +- 2 files changed, 4 insertions(+), 1 deletion(-) create mode 100644 package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash
package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash new file +3 -0
@@ -0,0 +1,3 @@ +# locally computed +sha256 b5b9c8e216b2bc4281c2443e07eab90547de0abd705614756ed68c7ad2fcf97a imx-gpu-viv-5.0.11.p4.5-sfp.bin +sha256 0591b495cd1c2547ae007d405b90729e2fb90603a5728b39d1a99cb4e1cf1eb4 imx-gpu-viv-5.0.11.p4.5-hfp.bin
package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk +1 -1
@@ -4,7 +4,7 @@ # ################################################################################ -IMX_GPU_VIV_BASE_VERSION = 5.0.11.p4.1 +IMX_GPU_VIV_BASE_VERSION = 5.0.11.p4.5 ifeq ($(BR2_ARM_EABIHF),y) IMX_GPU_VIV_VERSION = $(IMX_GPU_VIV_BASE_VERSION)-hfp else
Signature · 1 line
2.5.1
PATCH 5/14 xdriver_xf86-video-imx-viv: bump to version 5.0.11 p4.5
In reply to Gary BissonModify the version to match the version of imx-gpu-viv. Also add the package hash file.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-freescale/commit/45582680
The following xorg.conf was used in order to force the use of the vivante module:
https://github.com/Freescale/meta-fsl-arm/blob/master/recipes-graphics/xorg-xserver/xserver-xf86-config/mx6/xorg.conf
Note that the X server must be started with the "noreset" option to avoid crashes when closing X apps.
# X -noreset
--- .../x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.hash | 2 ++ package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.mk | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) create mode 100644 package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.hash
package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.hash new file +2 -0
@@ -0,0 +1,2 @@ +# locally computed +sha256 1a0b25a91b493e99dfa94a802290320ea998ebd45d7aab0f73d7c7bb521b7e84 xserver-xorg-video-imx-viv-5.0.11.p4.5.tar.gz
package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.mk +1 -1
@@ -4,7 +4,7 @@ # ################################################################################ -XDRIVER_XF86_VIDEO_IMX_VIV_VERSION = $(FREESCALE_IMX_VERSION) +XDRIVER_XF86_VIDEO_IMX_VIV_VERSION = 5.0.11.p4.5 XDRIVER_XF86_VIDEO_IMX_VIV_SITE = $(FREESCALE_IMX_SITE) XDRIVER_XF86_VIDEO_IMX_VIV_SOURCE = xserver-xorg-video-imx-viv-$(XDRIVER_XF86_VIDEO_IMX_VIV_VERSION).tar.gz XDRIVER_XF86_VIDEO_IMX_VIV_DEPENDENCIES = imx-gpu-viv xserver_xorg-server \
Signature · 1 line
2.5.1
PATCH 6/14 libfslcodec: bump version to 4.0.3
In reply to Gary BissonUpdate license file + add hash file.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/93b4c8c
This package has been implicitely tested through gstreamer as the 0.10 plugin relies on it:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
--- package/libfslcodec/libfslcodec.hash | 2 ++ package/libfslcodec/libfslcodec.mk | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) create mode 100644 package/libfslcodec/libfslcodec.hash
package/libfslcodec/libfslcodec.hash new file +2 -0
@@ -0,0 +1,2 @@ +# locally computed +sha256 0d0ff933eed0a021763115b9c8ae812c6376a19bbd95e555d89ea7404f6c8f2f libfslcodec-4.0.3.bin
package/libfslcodec/libfslcodec.mk +2 -2
@@ -4,13 +4,13 @@ # ################################################################################ -LIBFSLCODEC_VERSION = 4.0.2 +LIBFSLCODEC_VERSION = 4.0.3 LIBFSLCODEC_SITE = $(FREESCALE_IMX_SITE) LIBFSLCODEC_SOURCE = libfslcodec-$(LIBFSLCODEC_VERSION).bin LIBFSLCODEC_INSTALL_STAGING = YES LIBFSLCODEC_LICENSE = Freescale Semiconductor Software License Agreement, BSD-3c (flac, ogg headers) -LIBFSLCODEC_LICENSE_FILES = EULA EULA.txt +LIBFSLCODEC_LICENSE_FILES = EULA COPYING LIBFSLCODEC_REDISTRIBUTE = NO define LIBFSLCODEC_EXTRACT_CMDS
Signature · 1 line
2.5.1
PATCH 7/14 libfslparser: bump version to 4.0.3
In reply to Gary BissonUpdate license file + add hash file.
Changelog:
- Upgrade MP4 and MPEG2 parser
- Update COPYING with new version of license file
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/a7c90ea6
This package has been implicitely tested through gstreamer as the 0.10 plugin relies on it:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
--- package/libfslparser/libfslparser.hash | 2 ++ package/libfslparser/libfslparser.mk | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) create mode 100644 package/libfslparser/libfslparser.hash
package/libfslparser/libfslparser.hash new file +2 -0
@@ -0,0 +1,2 @@ +# locally computed +sha256 9db10ca6a61c8fdbe91b55b65d084dcbb5f9cfb58b088996c7dd2d6dc8385730 libfslparser-4.0.3.bin
package/libfslparser/libfslparser.mk +2 -2
@@ -4,13 +4,13 @@ # ################################################################################ -LIBFSLPARSER_VERSION = 4.0.2 +LIBFSLPARSER_VERSION = 4.0.3 LIBFSLPARSER_SITE = $(FREESCALE_IMX_SITE) LIBFSLPARSER_SOURCE = libfslparser-$(LIBFSLPARSER_VERSION).bin LIBFSLPARSER_INSTALL_STAGING = YES LIBFSLPARSER_LICENSE = Freescale Semiconductor Software License Agreement -LIBFSLPARSER_LICENSE_FILES = EULA EULA.txt +LIBFSLPARSER_LICENSE_FILES = EULA COPYING LIBFSLPARSER_REDISTRIBUTE = NO define LIBFSLPARSER_EXTRACT_CMDS
Signature · 1 line
2.5.1
PATCH 8/14 libfslvpuwrap: bump version to 1.0.58
In reply to Gary BissonChange license file + add hash file.
Changelog:
- Update the license file with new version and use COPYING
- Remove the folder /usr/share to avoid empty folder installation
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/1506776
This package has been implicitely tested through gstreamer as the plugins rely on it for vpu decoding:
# gst-launch-0.10 playbin # uri=file:///root/tears_of_steel_1080p.webm # gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm # gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \ matroskademux ! imxvpudec ! imxipuvideosink
--- package/libfslvpuwrap/libfslvpuwrap.hash | 2 ++ package/libfslvpuwrap/libfslvpuwrap.mk | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) create mode 100644 package/libfslvpuwrap/libfslvpuwrap.hash
package/libfslvpuwrap/libfslvpuwrap.hash new file +2 -0
@@ -0,0 +1,2 @@ +# locally computed +sha256 a278eb18ec24230166ac39e2eadf7b934798f0432654c2e24c4cb69c3ac1cf0f libfslvpuwrap-1.0.58.bin
package/libfslvpuwrap/libfslvpuwrap.mk +2 -2
@@ -4,14 +4,14 @@ # ################################################################################ -LIBFSLVPUWRAP_VERSION = 1.0.57 +LIBFSLVPUWRAP_VERSION = 1.0.58 LIBFSLVPUWRAP_SITE = $(FREESCALE_IMX_SITE) LIBFSLVPUWRAP_SOURCE = libfslvpuwrap-$(LIBFSLVPUWRAP_VERSION).bin LIBFSLVPUWRAP_DEPENDENCIES = imx-vpu LIBFSLVPUWRAP_INSTALL_STAGING = YES LIBFSLVPUWRAP_LICENSE = Freescale Semiconductor Software License Agreement -LIBFSLVPUWRAP_LICENSE_FILES = EULA EULA.txt +LIBFSLVPUWRAP_LICENSE_FILES = EULA COPYING LIBFSLVPUWRAP_REDISTRIBUTE = NO define LIBFSLVPUWRAP_EXTRACT_CMDS
Signature · 1 line
2.5.1
PATCH 9/14 gst-fsl-plugins: bump version to 4.0.3
In reply to Gary BissonAlso added the package hash file.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/0d2f4f8
This package has been tested using the following commands:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm # gst-launch-0.10 filesrc location=/root/tears_of_steel_1080p.webm ! \ matroskademux ! vpudec ! autovideosink # gst-launch-0.10 filesrc location=/root/tears_of_steel_1080p.webm ! \ matroskademux ! vpudec ! mfw_isink # gst-launch-0.10 imxv4l2src ! autovideosink
---
Hi,
Quick comment on this one, I might delete this package during next cycle as it is not maintained any more and has been removed from Yocto:
https://github.com/Freescale/meta-fsl-arm/commit/83b240e
Let me know your thoughts on this.
Regards,
Gary
--- package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.hash | 2 ++ package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) create mode 100644 package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.hash
package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.hash new file +2 -0
@@ -0,0 +1,2 @@ +# locally computed +sha256 568883b2a1d8d32e4004cb3f123790d0b4286c91c1fac38c9dc8e20bd1250764 gst-fsl-plugins-4.0.3.tar.gz
package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk +1 -1
@@ -4,7 +4,7 @@ # ################################################################################ -GST_FSL_PLUGINS_VERSION = 4.0.2 +GST_FSL_PLUGINS_VERSION = 4.0.3 GST_FSL_PLUGINS_SITE = $(FREESCALE_IMX_SITE) # Most is LGPLv2+, but some sources are copied from upstream and are
Signature · 1 line
2.5.1
PATCH 9/14 gst-fsl-plugins: bump version to 4.0.3
Gary,
Quoted 5 lines · Gary Bisson
Quick comment on this one, I might delete this package during next cycle as it is not maintained any more and has been removed from Yocto:
https://github.com/Freescale/meta-fsl-arm/commit/83b240eLet me know your thoughts on this.
GStreamer 0.10.x is anyway no longer being developed, I'm not sure it's really being maintained anymore either. We're keeping it in Buildroot for those people who are using platforms that don't have GStreamer 1.x plugins, or who have applications written with the GStreamer 0.10.x API.
We will have to decide at some point to mark GStreamer 0.10 as deprecated. Not sure when will be the right, I'm not a GStreamer user personally, so I don't know until when we should support 0.10.
Thanks,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 9/14 gst-fsl-plugins: bump version to 4.0.3
Quoted 4 lines · Thomas Petazzoni
Gary,
On Wed, 9 Sep 2015 22:20:58 +0200, Gary Bisson wrote:
Quoted 8 lines
Quoted 5 lines
Quick comment on this one, I might delete this package during next cycle as it is not maintained any more and has been removed from Yocto:
https://github.com/Freescale/meta-fsl-arm/commit/83b240eLet me know your thoughts on this.
GStreamer 0.10.x is anyway no longer being developed, I'm not sure it's really being maintained anymore either.
It has never been maintained. They stopped making 0.10 releases as soon as 1.0
(actually 0.11) existed.
Quoted 8 lines
We're keeping it in Buildroot
for those people who are using platforms that don't have GStreamer 1.x plugins, or who have applications written with the GStreamer 0.10.x API.We will have to decide at some point to mark GStreamer 0.10 as deprecated. Not sure when will be the right, I'm not a GStreamer user personally, so I don't know until when we should support 0.10.
We can deprecate it as soon as all packages that depend on it disappear. Which
is probably never.
Regards,
Arnout
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
PATCH 10/14 gst1-imx: bump version to 0.11.1
In reply to Gary BissonChangelog:
(0.11.1)
- vpu: decoder: Keep track of unfinished gstvideo frames
- blitter fixes and enhancements
- ipu: All pages are now cleared when page flipping is used
- compositor: Added support for cropping input streams
- imxv4l2src fixes and enhancements
(0.11.0)
- new common codebase for rectangular regions and video canvases
- new blitter-based video sink with full support for vsync to eliminate tearing
- complete rewrite of blitter base code
- new compositor elements
- vpu: decoder: Memory leaks fixed
- vpu: encoder: Bitrate can now be set on the fly
- eglvivsink: In Wayland, window x/y coordinates are now supported
- several v4l2src fixes
(0.10.2)
- v4l2src: renamed imxv4l2src to imxv4l2videosrc to avoid name collisions with the FSL plugins
- v4l2src: Call the buffer pool baseclass stop() function (fixes segfaults)
- uniaudio: Create correct config header even if no codecs were found
- audio: new MP3 encoder element using the libfslcodec MP3 encoder
- g2d/ipu/pxp blitter sink: Respect aspect ratio also in 90/270 degree rotations
- pxp: Remove broken/unsupported formats
- eglvivsink: Fix double mutex unlock
- phys mem meta naming cleanup
Tested with the following commands:
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm # gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \ matroskademux ! imxvpudec ! imxipuvideosink # gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \ matroskademux ! imxvpudec ! imxeglvivsink
--- package/gstreamer1/gst1-imx/gst1-imx.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
package/gstreamer1/gst1-imx/gst1-imx.mk +1 -1
@@ -4,7 +4,7 @@ # ################################################################################ -GST1_IMX_VERSION = 0.10.1 +GST1_IMX_VERSION = 0.11.1 GST1_IMX_SITE = $(call github,Freescale,gstreamer-imx,$(GST1_IMX_VERSION)) GST1_IMX_LICENSE = LGPLv2+
Signature · 1 line
2.5.1
PATCH 11/14 freescale_imx6*_defconfig: bump version to 3.14.28-1.0.0_ga
In reply to Gary Bisson---
Hi,
This update has only been built, it'd be great if anyone could give it a try on the actual hardware.
Regards,
Gary
--- configs/freescale_imx6dlsabreauto_defconfig | 8 ++++---- configs/freescale_imx6dlsabresd_defconfig | 8 ++++---- configs/freescale_imx6qsabreauto_defconfig | 8 ++++---- configs/freescale_imx6qsabresd_defconfig | 8 ++++---- configs/freescale_imx6sololiteevk_defconfig | 4 ++-- 5 files changed, 18 insertions(+), 18 deletions(-)
configs/freescale_imx6dlsabreauto_defconfig +4 -4
@@ -7,8 +7,8 @@ BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabre/patches" # toolchain BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.10.53" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y +BR2_DEFAULT_KERNEL_VERSION="3.14.28" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y # system BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
@@ -17,7 +17,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_GIT=y BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git" -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.10.53_1.1.0_ga" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.14.28_1.0.0_ga" BR2_LINUX_KERNEL_DEFCONFIG="imx_v7" BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000" BR2_LINUX_KERNEL_DTS_SUPPORT=y
@@ -32,4 +32,4 @@ BR2_TARGET_UBOOT_BOARDNAME="mx6dlsabreauto" BR2_TARGET_UBOOT_FORMAT_IMX=y BR2_TARGET_UBOOT_CUSTOM_GIT=y BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git" -BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.10.53_1.1.0_ga" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.14.28_1.0.0_ga"
configs/freescale_imx6dlsabresd_defconfig +4 -4
@@ -7,8 +7,8 @@ BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabre/patches" # toolchain BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.10.53" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y +BR2_DEFAULT_KERNEL_VERSION="3.14.28" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y # system BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
@@ -17,7 +17,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_GIT=y BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git" -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.10.53_1.1.0_ga" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.14.28_1.0.0_ga" BR2_LINUX_KERNEL_DEFCONFIG="imx_v7" BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000" BR2_LINUX_KERNEL_DTS_SUPPORT=y
@@ -32,4 +32,4 @@ BR2_TARGET_UBOOT_BOARDNAME="mx6dlsabresd" BR2_TARGET_UBOOT_FORMAT_IMX=y BR2_TARGET_UBOOT_CUSTOM_GIT=y BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git" -BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.10.53_1.1.0_ga" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.14.28_1.0.0_ga"
configs/freescale_imx6qsabreauto_defconfig +4 -4
@@ -7,8 +7,8 @@ BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabre/patches" # toolchain BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.10.53" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y +BR2_DEFAULT_KERNEL_VERSION="3.14.28" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y # system BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
@@ -17,7 +17,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_GIT=y BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git" -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.10.53_1.1.0_ga" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.14.28_1.0.0_ga" BR2_LINUX_KERNEL_DEFCONFIG="imx_v7" BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000" BR2_LINUX_KERNEL_DTS_SUPPORT=y
@@ -32,4 +32,4 @@ BR2_TARGET_UBOOT_BOARDNAME="mx6qsabreauto" BR2_TARGET_UBOOT_FORMAT_IMX=y BR2_TARGET_UBOOT_CUSTOM_GIT=y BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git" -BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.10.53_1.1.0_ga" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.14.28_1.0.0_ga"
configs/freescale_imx6qsabresd_defconfig +4 -4
@@ -7,8 +7,8 @@ BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabre/patches" # toolchain BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.10.53" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y +BR2_DEFAULT_KERNEL_VERSION="3.14.28" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y # system BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
@@ -17,7 +17,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_GIT=y BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git" -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.10.53_1.1.0_ga" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.14.28_1.0.0_ga" BR2_LINUX_KERNEL_DEFCONFIG="imx_v7" BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000" BR2_LINUX_KERNEL_DTS_SUPPORT=y
@@ -32,4 +32,4 @@ BR2_TARGET_UBOOT_BOARDNAME="mx6qsabresd" BR2_TARGET_UBOOT_FORMAT_IMX=y BR2_TARGET_UBOOT_CUSTOM_GIT=y BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git" -BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.10.53_1.1.0_ga" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.14.28_1.0.0_ga"
configs/freescale_imx6sololiteevk_defconfig +2 -2
@@ -9,7 +9,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_GIT=y BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git" -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.10.53_1.1.0_ga" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.14.28_1.0.0_ga" BR2_LINUX_KERNEL_DEFCONFIG="imx_v7" BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x80008000" BR2_LINUX_KERNEL_DTS_SUPPORT=y
@@ -24,4 +24,4 @@ BR2_TARGET_UBOOT_BOARDNAME="mx6slevk" BR2_TARGET_UBOOT_FORMAT_IMX=y BR2_TARGET_UBOOT_CUSTOM_GIT=y BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git" -BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.10.53_1.1.0_ga" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.14.28_1.0.0_ga"
Signature · 1 line
2.5.1
PATCH 12/14 qmx6_defconfig: bump version to 3.14.28_1.0.0
In reply to Gary Bisson---
Hi,
This update has only been built, it'd be great if anyone could give it a try on the actual hardware.
Regards,
Gary
--- configs/qmx6_defconfig | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
configs/qmx6_defconfig +6 -6
@@ -1,17 +1,17 @@ BR2_arm=y BR2_cortex_a9=y BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.10.53" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y +BR2_DEFAULT_KERNEL_VERSION="3.14.28" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1" # Notice you need a recent version of u-boot (with DT support) to be able # to boot this kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_GIT=y -BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://git.congatec.com/arm/qmx6_kernel.git" -# Last version of branch cgt_imx_3.10.53_1.1.0 -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="cea0de46e2c8f0a5c67f46005e84ae1d418731bc" +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://git.congatec.com/arm/imx6_kernel_3.14.git" +# Last version of branch cgt_qmx6_3.14.28_1.0.0 +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="105820d6bd251deb49c3dd3f71fa0d76adce97c7" BR2_LINUX_KERNEL_DEFCONFIG="qmx6" BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000" BR2_LINUX_KERNEL_DTS_SUPPORT=y
@@ -23,7 +23,7 @@ BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="cgt_qmx6_pn016103" BR2_TARGET_UBOOT_CUSTOM_GIT=y BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://git.congatec.com/arm/qmx6_uboot.git" -BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="30ba236ef6df04e4cca58c3e06c4f63c2db12115" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="4d3b64e93064ed3d97ef7d91ff0f61a693a460fc" BR2_TARGET_UBOOT_FORMAT_CUSTOM=y BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.pn016103.imx"
Signature · 1 line
2.5.1
PATCH 13/14 nitrogen6x_defconfig: bump version to 3.14.28-1.0.0
In reply to Gary BissonU-Boot version is updated to v2015.07.
--- configs/nitrogen6x_defconfig | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
configs/nitrogen6x_defconfig +6 -5
@@ -14,21 +14,22 @@ BR2_TARGET_ROOTFS_EXT2_2r1=y # Lock headers to match kernel BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.10.53" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y +BR2_DEFAULT_KERNEL_VERSION="3.14.28" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y # bootloader BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="nitrogen6q" BR2_TARGET_UBOOT_FORMAT_IMX=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="http://github.com/boundarydevices/u-boot-imx6/tarball/21eb4146/u-boot-21eb4146.tar.gz" +# Last version of branch boundary-v2015.07 +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="http://github.com/boundarydevices/u-boot-imx6/tarball/5115a9e/u-boot-5115a9e.tar.gz" # kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -# Last version of branch boundary-imx_3.10.53_1.1.1_ga -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/tarball/98c0fdbe/linux-imx6-98c0fdbe.tar.gz" +# Last version of branch boundary-imx_3.14.28_1.0.0_ga +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/tarball/3417c66/linux-imx6-3417c66.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="nitrogen6x" BR2_LINUX_KERNEL_INSTALL_TARGET=y BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
Signature · 1 line
2.5.1
PATCH 14/14 board/boundarydevices: update u-boot script for 3.14 kernels
In reply to Gary BissonThis script will support coming platforms such as iMX6SoloX or iMX6QuadPlus.
One important change is that the script now relies on U-Boot to make the display detection in order to simplify the script.
--- board/boundarydevices/nitrogen6x/6x_bootscript.txt | 223 ++++++++------------- 1 file changed, 84 insertions(+), 139 deletions(-)
board/boundarydevices/nitrogen6x/6x_bootscript.txt +84 -139
@@ -1,186 +1,131 @@ setenv bootargs '' -if ${fs}load ${dtype} ${disk}:1 10800000 uEnv.txt ; then - env import -t 10800000 $filesize -fi - -if itest.s "x" == "x$dtbname" ; then - dtbname="imx6"; - if itest.s x6SOLO == "x$cpu" ; then - dtbname=${dtbname}dl-; - elif itest.s x6DL == "x$cpu" ; then - dtbname=${dtbname}dl-; +a_script=0x10800000 +a_uImage=0x10800000 +a_fdt=0x13000000 + +setenv initrd_high 0xffffffff +if itest.s "x" == "x${dtbname}" ; then + if itest.s x6SOLO == "x${cpu}" ; then + dtbname=imx6dl-${board}.dtb; + elif itest.s x6DL == "x${cpu}" ; then + dtbname=imx6dl-${board}.dtb; + elif itest.s x6QP == "x${cpu}" ; then + dtbname=imx6qp-${board}.dtb; + elif itest.s x6SX == "x${cpu}" ; then + if itest.s "x1" != "x$m4enabled" ; then + dtbname=imx6sx-${board}.dtb; + else + run m4boot; + dtbname=imx6sx-${board}-m4.dtb; + fi + a_script=0x80800000 + a_uImage=0x80800000 + a_fdt=0x83000000 else - dtbname=${dtbname}q-; - fi - if itest.s x == "x$board" ; then - board=sabrelite + dtbname=imx6q-${board}.dtb; fi - dtbname=${dtbname}${board}.dtb; +fi + +if load ${dtype} ${disk}:1 ${a_script} uEnv.txt ; then + env import -t ${a_script} ${filesize} fi if itest.s x == x${bootdir} ; then bootdir=/boot/ fi -setenv fdt_addr 0x12000000 -if ${fs}load ${dtype} ${disk}:1 $fdt_addr ${bootdir}$dtbname ; then - fdt addr $fdt_addr +if itest.s x${bootpart} == x ; then + bootpart=1 +fi + +if load ${dtype} ${disk}:${bootpart} ${a_fdt} ${bootdir}${dtbname} ; then + fdt addr ${a_fdt} setenv fdt_high 0xffffffff else - echo "!!!! Error loading ${bootdir}$dtbname"; + echo "!!!! Error loading ${bootdir}${dtbname}"; exit; fi -# ------------------- HDMI detection -i2c dev 1 ; -if i2c probe 0x50 ; then - echo "------ have HDMI monitor"; - if itest.s x == x$allow_noncea ; then - setenv bootargs $bootargs mxc_hdmi.only_cea=1; - echo "only CEA modes allowed on HDMI port"; - else - setenv bootargs $bootargs mxc_hdmi.only_cea=0; - echo "non-CEA modes allowed on HDMI, audio may be affected"; - fi -else - fdt rm hdmi_display - echo "------ no HDMI monitor"; -fi - -# ------------------- LVDS detection -if itest.s "x" != "x$lvds_1080p" ; then - echo "----- 1080P dual channel LVDS"; - fdt rm okaya1024x600 - fdt rm lg1280x800 - fdt rm hannstar; - fdt set ldb split-mode 1 - fdt set lvds_display interface_pix_fmt "RGB24" - fdt set ldb/lvds-channel at 0 fsl,data-width <24> -else - fdt rm ldb split-mode - fdt rm lvds1080p - - # -------- LVDS0 (bottom on Nitrogen6_Max) - setenv have_lvds - i2c dev 2 - if i2c probe 0x04 ; then - echo "------ have Freescale display"; - setenv have_lvds 1 - else - echo "------ no Freescale display"; - fdt rm hannstar; - fi +# first enable tfp410 +i2c dev 1 +i2c mw 38 8.1 bd - if i2c probe 0x38 ; then - if itest.s "xLDB-WXGA" == "x$panel"; then - screenres=1280,800 - fdt rm okaya1024x600 - else - screenres=1024,600 - fdt rm lg1280x800 - fi - setenv have_lvds 1 - setenv bootargs $bootargs ft5x06_ts.screenres=$screenres - if itest.s "x" -ne "x$calibration" ; then - setenv bootargs $bootargs ft5x06_ts.calibration=$calibration - fi - else - echo "------ no ft5x06 touch controller"; - fdt rm okaya1024x600 - fdt rm lg1280x800 - fi - - if itest.s "x" == "x$have_lvds"; then - fdt rm lvds_display; - fi - - # -------- LVDS1 (top on Nitrogen6_Max) - if itest.s "xhannstar" == "x$lvds1_panel" ; then - echo "configure LVDS1 for Hannstar panel" - fdt rm okaya1024x600_2; - fdt rm lg1280x800_2; - fdt set lvds_display_2 status okay - elif itest.s "xokaya1024x600" == "x$lvds1_panel" ; then - echo "configure LVDS1 for 1024x600 panel" - fdt rm hannstar_2; - fdt rm lg1280x800_2; - fdt set lvds_display_2 status okay - elif itest.s "xlg1280x800" == "x$lvds1_panel" ; then - echo "configure LVDS1 for 1280x800 panel" - fdt rm hannstar_2; - fdt rm okaya1024x600_2; - fdt set lvds_display_2 status okay - else - fdt rm lvds_display_2 ; # ignore errors on boards != 6_max - fi +cmd_xxx_present= +fdt resize +if itest.s "x" != "x${cmd_custom}" ; then + run cmd_custom + cmd_xxx_present=1; fi -# ------------------- LCD detection -setenv have_lcd ''; -if i2c probe 0x48 ; then - setenv have_lcd 1; - echo "------- found TSC2004 touch controller"; - if itest.s "x" -eq "x$tsc_calibration" ; then - setenv bootargs $bootargs tsc2004.calibration=-67247,-764,272499173,324,69283,-8653010,65536 +if itest.s "x" != "x${cmd_hdmi}" ; then + run cmd_hdmi + cmd_xxx_present=1; + if itest.s x == x${allow_noncea} ; then + setenv bootargs ${bootargs} mxc_hdmi.only_cea=1; + echo "only CEA modes allowed on HDMI port"; else - setenv bootargs $bootargs tsc2004.calibration=$tsc_calibration + setenv bootargs ${bootargs} mxc_hdmi.only_cea=0; + echo "non-CEA modes allowed on HDMI, audio may be affected"; fi -elif i2c probe 0x4d ; then - setenv have_lcd 1; - echo "------- found AR1020 touch controller"; fi -if itest.s "x" != "x$ignore_lcd" ; then - echo "------ ignoring LCD display"; - setenv have_lcd ''; +if itest.s "x" != "x${cmd_lcd}" ; then + run cmd_lcd + cmd_xxx_present=1; +fi +if itest.s "x" != "x${cmd_lvds}" ; then + run cmd_lvds + cmd_xxx_present=1; +fi +if itest.s "x" != "x${cmd_lvds2}" ; then + run cmd_lvds2 + cmd_xxx_present=1; fi -if itest.s "x" != "x$have_lcd" ; then - echo "----- found LCD display"; -else - fdt rm lcd_display; +if itest.s "x" == "x${cmd_xxx_present}" ; then + echo "!!!!!!!!!!!!!!!!" + echo "warning: your u-boot may be outdated, please upgrade" + echo "!!!!!!!!!!!!!!!!" fi -setenv bootargs "$bootargs console=ttymxc1,115200 vmalloc=400M consoleblank=0 rootwait" +setenv bootargs "${bootargs} console=${console},115200 vmalloc=400M consoleblank=0 rootwait fixrtc" -if itest.s x$bootpart == x ; then - bootpart=1 -fi +bpart=1 if test "sata" = "${dtype}" ; then - setenv bootargs "$bootargs root=/dev/sda$bootpart" ; + setenv bootargs "${bootargs} root=/dev/sda${bpart}" ; +elif test "usb" = "${dtype}" ; then + setenv bootargs "${bootargs} root=/dev/sda${bpart}" ; else - if test "usb" = "${dtype}" ; then - setenv bootargs "$bootargs root=/dev/sda$bootpart" ; - elif itest 0 -eq ${disk}; then - setenv bootargs "$bootargs root=/dev/mmcblk2p$bootpart" ; - else - setenv bootargs "$bootargs root=/dev/mmcblk3p$bootpart" ; - fi + setenv bootargs "${bootargs} root=/dev/mmcblk${disk}p${bpart}" fi if itest.s "x" != "x${disable_giga}" ; then - setenv bootargs $bootargs fec.disable_giga=1 + setenv bootargs ${bootargs} fec.disable_giga=1 +fi + +if itest.s "x" != "x${wlmac}" ; then + setenv bootargs ${bootargs} wlcore.mac=${wlmac} fi -if itest.s "x" != "x$wlmac" ; then - setenv bootargs $bootargs wlcore.mac=$wlmac +if itest.s "x" != "x${gpumem}" ; then + setenv bootargs ${bootargs} galcore.contiguousSize=${gpumem} fi -if itest.s "x" != "x$gpumem" ; then - setenv bootargs $bootargs galcore.contiguousSize=$gpumem +if itest.s "x" != "x${cma}" ; then + setenv bootargs ${bootargs} cma=${cma} fi -if itest.s "x" != "x$show_fdt" ; then +if itest.s "x" != "x${show_fdt}" ; then fdt print / fi -if itest.s "x" != "x$show_env" ; then +if itest.s "x" != "x${show_env}" ; then printenv fi -if ${fs}load ${dtype} ${disk}:1 10800000 ${bootdir}uImage ; then - bootm 10800000 - $fdt_addr +if load ${dtype} ${disk}:${bootpart} ${a_uImage} ${bootdir}/uImage ; then + bootm ${a_uImage} - ${a_fdt} fi echo "Error loading kernel image"
Signature · 1 line
2.5.1
Thomas Petazzoni
Appliedcover Update Freescale packages to 3.14.28-1.0.0_ga
In reply to Gary BissonHello Gary,
Quoted 2 lines · Gary Bisson
Gary Bisson (14):
freescale-imx: bump to 3.14.28-1.0.0_ga release
Applied.
Quoted 2 lines
kobs-ng: remove obsolete package
imx-kobs: add new package
Those two not applied. I'll reply on the imx-kobs package why.
Quoted 11 lines
imx-gpu-viv: bump version to 5.0.11 p4.5 xdriver_xf86-video-imx-viv: bump to version 5.0.11 p4.5
libfslcodec: bump version to 4.0.3
libfslparser: bump version to 4.0.3
libfslvpuwrap: bump version to 1.0.58
gst-fsl-plugins: bump version to 4.0.3
gst1-imx: bump version to 0.11.1 freescale_imx6*_defconfig: bump version to 3.14.28-1.0.0_ga
qmx6_defconfig: bump version to 3.14.28_1.0.0
nitrogen6x_defconfig: bump version to 3.14.28-1.0.0 board/boundarydevices: update u-boot script for 3.14 kernels
All those patches applied.
Thanks a lot for keeping the i.MX6 support up to date! It's really great.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
cover Update Freescale packages to 3.14.28-1.0.0_ga
Hello all,
I mistakenly replied on the v1, but it's obviously the v2 of the patches that I actually applied.
Thomas
Quoted 32 lines · Thomas Petazzoni
Hello Gary,
Quoted 2 lines · Gary Bisson
Gary Bisson (14):
freescale-imx: bump to 3.14.28-1.0.0_ga releaseApplied.
Quoted 2 lines
kobs-ng: remove obsolete package
imx-kobs: add new packageThose two not applied. I'll reply on the imx-kobs package why.
Quoted 11 lines
imx-gpu-viv: bump version to 5.0.11 p4.5 xdriver_xf86-video-imx-viv: bump to version 5.0.11 p4.5
libfslcodec: bump version to 4.0.3
libfslparser: bump version to 4.0.3
libfslvpuwrap: bump version to 1.0.58
gst-fsl-plugins: bump version to 4.0.3
gst1-imx: bump version to 0.11.1 freescale_imx6*_defconfig: bump version to 3.14.28-1.0.0_ga
qmx6_defconfig: bump version to 3.14.28_1.0.0
nitrogen6x_defconfig: bump version to 3.14.28-1.0.0 board/boundarydevices: update u-boot script for 3.14 kernelsAll those patches applied.
Thanks a lot for keeping the i.MX6 support up to date! It's really great.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
cover Update Freescale packages to 3.14.28-1.0.0_ga
In reply to Thomas PetazzoniHi Thomas,
Quoted 7 lines · Thomas Petazzoni
Hello Gary,
Quoted 2 lines · Gary Bisson
Gary Bisson (14):
freescale-imx: bump to 3.14.28-1.0.0_ga release
Quoted 6 lines
Applied.
Quoted 2 lines
kobs-ng: remove obsolete package
imx-kobs: add new packageThose two not applied. I'll reply on the imx-kobs package why.
I will take a look at it today.
Quoted 12 lines
Quoted 11 lines
imx-gpu-viv: bump version to 5.0.11 p4.5 xdriver_xf86-video-imx-viv: bump to version 5.0.11 p4.5
libfslcodec: bump version to 4.0.3
libfslparser: bump version to 4.0.3
libfslvpuwrap: bump version to 1.0.58
gst-fsl-plugins: bump version to 4.0.3
gst1-imx: bump version to 0.11.1 freescale_imx6*_defconfig: bump version to 3.14.28-1.0.0_ga
qmx6_defconfig: bump version to 3.14.28_1.0.0
nitrogen6x_defconfig: bump version to 3.14.28-1.0.0 board/boundarydevices: update u-boot script for 3.14 kernels
Quoted 1 line
All those patches applied.
Thank you! Could you also apply Baruch VPU changes since all my testing was done with his patches applied (plus they are harmless):
http://patchwork.ozlabs.org/patch/513580/
http://patchwork.ozlabs.org/patch/513579/
Thanks,
Gary