Cross-compiling Node-RED 0.10.10 on Openembedded Yocto project LINUX
I'm running into some difficulty building Node-RED 0.10.10 for an ARM architecture project. I am trying to build using the Openembedded Yocto core
to cross-compile the firmware for the project I am working on. There are some
custom modifications that we have made to Node-RED, primarily adding our own
nodes integrated for our hardware. These changes have been integrated using
diffs applied to the code from GitHub. Due to these changes, I need to follow
the development procedure:
# git clone https://github.com/node-red/node-red.git
# cd node-red
# npm install
# sudo npm install -g grunt-cli
# grunt build
# node red
Previously the build was using "npm install --production" and built successfully, and Node-RED would run just fine on our ARM based product. This
is no longer sufficient for building and running Node-RED 0.10.10 in the manner
we wish to build and install it because it appears that the build is now generating files that don't get created with "npm install --production". I am
presuming that Node-RED 0.11.1 will have the same requirement(s).
There is a command in the Yocto project bitbake recipes called oe_runnpm that
allows the running of npm commands in the build with the appropriate environment all set up. This is not working with the "grunt build" command.
Whether grunt is installed locally or globally the following error indicating that,
from what I can tell, grunt is using the build server architecture instead of
the cross-compile ARM architecture occurs:
ERROR: QA Issue: Architecture did not match (40 to 62)
on /work/arm926ejste-mlinux-linux-gnueabi/node-red/0.10.4-r47/packages-split/node-red/opt/node-red/node_modules/grunt-sass/node_modules/node-sass/vendor/linux-x64-11/binding.node
The following is what my bitbake recipe looks like:
DESCRIPTION = "Node-RED"
HOMEPAGE = "http://nodered.org"
LICENSE = "Apache-2.0"LIC_FILES_CHKSUM = "file://LICENSE;md5=2ee41112a44fe7014dce33e26468ba93" DEPENDS = "nodejs nodejs-native"
PR = "r47"
inherit npm
inherit update-rc.d
.
.
.
S = "${WORKDIR}/git"
INITSCRIPT_NAME = "node-red"INITSCRIPT_PARAMS = "defaults 99 21"
do_install() {
# npm install dependencies
oe_runnpm install
# npm install more stuff
oe_runnpm install grunt-cli
./node_modules/grunt-cli/bin/grunt build oe_runnpm install serialport nodemailer
# remove dupe deps
oe_runnpm dedupe
# install node-red
install -d ${D}/opt/node-red
cp -r * ${D}/opt/node-red/
# install -d -p ${D}/opt/node-red/nodes/mts
# cp -r ${WORKDIR}/apps/lora ${D}/opt/node-red/nodes/mts/
install -d ${D}${sysconfdir}/init.d
install -m 0755 ${WORKDIR}/node-red.init${D}${sysconfdir}/init.d/node-red
install -d ${D}${bindir}
install -m 0755 ${WORKDIR}/update-flows ${D}${bindir}/
}I am not very familiar with this grunt utility. Is there any guidance or an
alternative that you could give me that might work to get this build to succeed? This error is related to grunt-sass which requires node-sass, which
requires libsass. The version of node-js being integrated with this is 0.10.40.
Thank You,
Signature · 11 lines
Jeff Hatch Senior Software Engineer 1 (763) 717 - 5574 DIRECT 1 (763) 228 - 3603 MOBILE 2205 Woodale Drive Mounds View, MN 55112 www.multitech.com