Skip to contentSkip to conversation

ARM: irqchip: mxs: prepare driver for HW with different offsets

PATCH Superseded Oleksij Rempel 2 participants 3 messages Sep 17, 2015

Subsystems (2)

v1 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 ARM: irqchip: mxs: prepare driver for HW with different offsets

Some HW has similar functionality but different register offsets. Make sure we can change offsets dynamically.

---
 drivers/irqchip/irq-mxs.c | 55 ++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 42 insertions(+), 13 deletions(-)
drivers/irqchip/irq-mxs.c +42 -13
index 1faf812..c8d2ac1 100644
@@ -28,18 +28,39 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+#define SET_REG 4
+#define CLR_REG 8
+
 #define HW_ICOLL_VECTOR				0x0000
 #define HW_ICOLL_LEVELACK			0x0010
 #define HW_ICOLL_CTRL				0x0020
 #define HW_ICOLL_STAT_OFFSET			0x0070
-#define HW_ICOLL_INTERRUPTn_SET(n)		(0x0124 + (n) * 0x10)
-#define HW_ICOLL_INTERRUPTn_CLR(n)		(0x0128 + (n) * 0x10)
-#define BM_ICOLL_INTERRUPTn_ENABLE		0x00000004
+#define HW_ICOLL_INTERRUPT0			0x0120
+#define HW_ICOLL_INTERRUPTn(n)			((n) * 0x10)
+#define BM_ICOLL_INTR_ENABLE			BIT(2)
 #define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0	0x1
 
 #define ICOLL_NUM_IRQS		128
 
-static void __iomem *icoll_base;
+struct icoll_priv {
+	void __iomem *vector;
+	void __iomem *levelack;
+	void __iomem *ctrl;
+	void __iomem *stat;
+	void __iomem *intr;
+	/* number of interrupts per register */
+	int intr_per_reg;
+	void __iomem *clear;
+};
+
+static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
 
 static void icoll_ack_irq(struct irq_data *d)
@@ -50,19 +71,19 @@ static void icoll_ack_irq(struct irq_data *d)
 	 * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
 	 */
 	__raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
-			icoll_base + HW_ICOLL_LEVELACK);
+			icoll_priv.levelack);
 }
 
 static void icoll_mask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + CLR_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static void icoll_unmask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_SET(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static struct irq_chip mxs_icoll_chip = {
@@ -75,8 +96,8 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
 	u32 irqnr;
 
-	irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET);
-	__raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR);
+	irqnr = __raw_readl(icoll_priv.stat);
+	__raw_writel(irqnr, icoll_priv.vector);
 	handle_domain_irq(icoll_domain, irqnr, regs);
 }
 
@@ -97,14 +118,22 @@ static const struct irq_domain_ops icoll_irq_domain_ops = {
 static int __init icoll_of_init(struct device_node *np,
 			  struct device_node *interrupt_parent)
 {
-	icoll_base = of_iomap(np, 0);
+	void __iomem *icoll_base = of_iomap(np, 0);
 	WARN_ON(!icoll_base);
 
+	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + HW_ICOLL_INTERRUPT0;
+	icoll_priv.intr_per_reg	= 1;
+	icoll_priv.clear	= NULL;
+
 	/*
 	 * Interrupt Collector reset, which initializes the priority
 	 * for each irq to level 0.
 	 */
-	stmp_reset_block(icoll_base + HW_ICOLL_CTRL);
+	stmp_reset_block(icoll_priv.ctrl);
 
 	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
 					     &icoll_irq_domain_ops, NULL);
Signature · 1 line
2.5.0
#1 lore raw

PATCH 2/2 ARM: irqchip: mxs: add Alpascale ASM9260 support

Freescale iMX23/iMX28 and Alphascale ASM9260 have similar interrupt collectors. It makes easy to reuse irq-mxs code for ASM9260. Differences between this devices are fallowing:
- different register offsets
- different count of intterupt lines per register
- ASM9260 don't provide reset bit
- ASM9260 don't support FIQ.

---
 drivers/irqchip/Kconfig                    |   5 ++
 drivers/irqchip/Makefile                   |   2 +-
 drivers/irqchip/alphascale_asm9260-icoll.h | 109 +++++++++++++++++++++++++++++
 drivers/irqchip/irq-mxs.c                  | 106 +++++++++++++++++++++++++---
 4 files changed, 213 insertions(+), 9 deletions(-)
 create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h
drivers/irqchip/Kconfig +5 -0
index 27b52c8..0dfd840 100644
@@ -187,3 +187,8 @@ config IMX_GPCV2
 	select IRQ_DOMAIN
 	help
 	  Enables the wakeup IRQs for IMX platforms with GPCv2 block
+
+config IRQ_MXS
+	def_bool y if MACH_ASM9260 || ARCH_MXS
+	select IRQ_DOMAIN
+	select STMP_DEVICE
drivers/irqchip/Makefile +1 -1
index bb3048f..177f78f 100644
@@ -6,7 +6,7 @@ obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
 obj-$(CONFIG_ARCH_HIP04)		+= irq-hip04.o
 obj-$(CONFIG_ARCH_MMP)			+= irq-mmp.o
 obj-$(CONFIG_ARCH_MVEBU)		+= irq-armada-370-xp.o
-obj-$(CONFIG_ARCH_MXS)			+= irq-mxs.o
+obj-$(CONFIG_IRQ_MXS)			+= irq-mxs.o
 obj-$(CONFIG_ARCH_TEGRA)		+= irq-tegra.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
 obj-$(CONFIG_DW_APB_ICTL)		+= irq-dw-apb-ictl.o
drivers/irqchip/alphascale_asm9260-icoll.h new file +109 -0

109 lines not on this page · raw message

drivers/irqchip/irq-mxs.c +98 -8

149 lines not on this page · raw message

Signature · 1 line
2.5.0
#2 lore raw

Re: [PATCH 2/2] ARM: irqchip: mxs: add Alpascale ASM9260 support

Quoted 46 lines · Oleksij Rempel

static struct icoll_priv icoll_priv;
static struct irq_domain *icoll_domain;

drivers/irqchip/irq-mxs.c +29 -4
+static DEFINE_RAW_SPINLOCK(icoll_lock);
+
+/* calculate bit offset depending on number of intterupt per register */
+static u32 icoll_intr_bitshift(struct irq_data *d, u32 bit)
+{
+	/*
+	 * We expect intr_per_reg to be 4 or 1, it means
+	 * "n" will be 3 or 0.
+	 */
+	int n = icoll_priv.intr_per_reg - 1;
+
+	/*
+	 * If n = 0, "bit" is never shifted.
+	 * If n = 3, mask lower part of hwirq to convert it
+	 * in 0, 1, 2 or 3 and then multiply it by 8 (or shift by 3)
+	 */
+	return bit << ((d->hwirq & n) << n);
+}
+
+/* calculate mem offset depending on number of intterupt per register */
+static void __iomem *icoll_intr_reg(struct irq_data *d)
+{
+	int n = icoll_priv.intr_per_reg >> 1;
+
+	/* offset = hwirq / intr_per_reg * 0x10 */
+	return icoll_priv.intr + ((d->hwirq >> n) * 0x10);
+}
 
 static void icoll_ack_irq(struct irq_data *d)
 {
@@ -76,14 +107,21 @@ static void icoll_ack_irq(struct irq_data *d)
 
 static void icoll_mask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTR_ENABLE,
-			icoll_priv.intr + CLR_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + CLR_REG);
 }
 
 static void icoll_unmask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTR_ENABLE,
-			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));

drivers/irqchip/irq-mxs.c static void icoll_ack_irq(struct irq_data *d) · line 125

Quoted 10 lines
drivers/irqchip/irq-mxs.c +9 -0
+	raw_spin_lock(&icoll_lock);
+	if (icoll_priv.clear)
+		__raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq),
+				icoll_priv.clear +
+				ASM9260_HW_ICOLL_CLEARn(d->hwirq));
+
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + SET_REG);
+	raw_spin_unlock(&icoll_lock);
 }

I don't think this is a brilliant idea. You burden the existing users with that bit shift mask machinery, an extra conditional and the spinlock in the unmask path.

You can simply implement a seperate pair of callbacks and assign them at setup time.

Btw, why is that spinlock only in unmask()?

Quoted 39 lines
drivers/irqchip/irq-mxs.c +24 -2
 static struct irq_chip mxs_icoll_chip = {
@@ -115,12 +153,34 @@ static const struct irq_domain_ops icoll_irq_domain_ops = {
 	.xlate = irq_domain_xlate_onecell,
 };
 
+static void __init icoll_add_domain(struct device_node *np,
+			  int num)
+{
+	icoll_domain = irq_domain_add_linear(np, num,
+					     &icoll_irq_domain_ops, NULL);
+
+	if (!icoll_domain)
+		panic("%s: unable add irq domain", np->full_name);
+	irq_set_default_host(icoll_domain);
+	set_handle_irq(icoll_handle_irq);
+}
+
+static void __iomem * __init icoll_init_iobase(struct device_node *np)
+{
+	void __iomem *icoll_base;
+
+	icoll_base = of_io_request_and_map(np, 0, np->name);
+	if (!icoll_base)
+		panic("%s: unable to map resource", np->full_name);
+	return icoll_base;
+}
+
 static int __init icoll_of_init(struct device_node *np,
 			  struct device_node *interrupt_parent)
 {
-	void __iomem *icoll_base = of_iomap(np, 0);
-	WARN_ON(!icoll_base);
+	void __iomem *icoll_base;
 
+	icoll_base		= icoll_init_iobase(np);
 	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
 	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
 	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;

drivers/irqchip/irq-mxs.c static int __init icoll_of_init(struct device_node *np, · line 201

Quoted 9 lines
drivers/irqchip/irq-mxs.c +2 -2
@@ -135,8 +195,38 @@ static int __init icoll_of_init(struct device_node *np,
 	 */
 	stmp_reset_block(icoll_priv.ctrl);
 
-	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
-					     &icoll_irq_domain_ops, NULL);
+	icoll_add_domain(np, ICOLL_NUM_IRQS);
+
 	return icoll_domain ? 0 : -ENODEV;
 }

That part of the patch should move into the preparatory patch. It has nothing to do with asm9260.

Thanks,

tglx