Skip to contentSkip to conversation

Bluetooth: btmrvl: remove extra space in cast

PATCH In review Amitkumar Karwar 2 participants 4 messages Sep 21, 2015 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 Bluetooth: btmrvl: remove extra space in cast

Coding style fix, extra spaces are removed to make casting consistent.

---
 drivers/bluetooth/btmrvl_sdio.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/bluetooth/btmrvl_sdio.c +5 -5
index 5f7c9be..68b7ff0 100644
@@ -194,22 +194,22 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
 static const struct sdio_device_id btmrvl_sdio_ids[] = {
 	/* Marvell SD8688 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
-			.driver_data = (unsigned long) &btmrvl_sdio_sd8688 },
+			.driver_data = (unsigned long)&btmrvl_sdio_sd8688 },
 	/* Marvell SD8787 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911A),
-			.driver_data = (unsigned long) &btmrvl_sdio_sd8787 },
+			.driver_data = (unsigned long)&btmrvl_sdio_sd8787 },
 	/* Marvell SD8787 Bluetooth AMP device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911B),
-			.driver_data = (unsigned long) &btmrvl_sdio_sd8787 },
+			.driver_data = (unsigned long)&btmrvl_sdio_sd8787 },
 	/* Marvell SD8797 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A),
-			.driver_data = (unsigned long) &btmrvl_sdio_sd8797 },
+			.driver_data = (unsigned long)&btmrvl_sdio_sd8797 },
 	/* Marvell SD8887 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9136),
 			.driver_data = (unsigned long)&btmrvl_sdio_sd8887 },
 	/* Marvell SD8897 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912E),
-			.driver_data = (unsigned long) &btmrvl_sdio_sd8897 },
+			.driver_data = (unsigned long)&btmrvl_sdio_sd8897 },
 
 	{ }	/* Terminating entry */
 };
Signature · 1 line
1.8.1.4
#1 lore raw

PATCH v2 2/2 Bluetooth: btmrvl: add sd8997 chipset support

This patch adds support for Marvell's new chipset SD8997. Register offsets and supported feature flags are updated.

---
v2: Firmware name is corrected.
sdsd8997_combo.bin -> sd8997_uapsta.bin

---
 drivers/bluetooth/Kconfig       |  4 ++--
 drivers/bluetooth/btmrvl_sdio.c | 36 ++++++++++++++++++++++++++++++++++++
 2 files changed, 38 insertions(+), 2 deletions(-)
drivers/bluetooth/Kconfig +2 -2
index 0bd88c9..3d480d8 100644
@@ -275,7 +275,7 @@ config BT_MRVL
 	  The core driver to support Marvell Bluetooth devices.
 
 	  This driver is required if you want to support
-	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897.
+	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8997.
 
 	  Say Y here to compile Marvell Bluetooth driver
 	  into the kernel or say M to compile it as module.
@@ -289,7 +289,7 @@ config BT_MRVL_SDIO
 	  The driver for Marvell Bluetooth chipsets with SDIO interface.
 
 	  This driver is required if you want to use Marvell Bluetooth
-	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897
+	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8997
 	  chipsets are supported.
 
 	  Say Y here to compile support for Marvell BT-over-SDIO driver
drivers/bluetooth/btmrvl_sdio.c +36 -0
index 68b7ff0..7f6fb17 100644
@@ -146,6 +146,29 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8897 = {
 	.fw_dump_end = 0xea,
 };
 
+static const struct btmrvl_sdio_card_reg btmrvl_reg_8997 = {
+	.cfg = 0x00,
+	.host_int_mask = 0x08,
+	.host_intstatus = 0x0c,
+	.card_status = 0x5c,
+	.sq_read_base_addr_a0 = 0xf8,
+	.sq_read_base_addr_a1 = 0xf9,
+	.card_revision = 0xc8,
+	.card_fw_status0 = 0xe8,
+	.card_fw_status1 = 0xe9,
+	.card_rx_len = 0xea,
+	.card_rx_unit = 0xeb,
+	.io_port_0 = 0xe4,
+	.io_port_1 = 0xe5,
+	.io_port_2 = 0xe6,
+	.int_read_to_clear = true,
+	.host_int_rsr = 0x04,
+	.card_misc_cfg = 0xD8,
+	.fw_dump_ctrl = 0xf0,
+	.fw_dump_start = 0xf1,
+	.fw_dump_end = 0xf8,
+};
+
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
 	.helper		= "mrvl/sd8688_helper.bin",
 	.firmware	= "mrvl/sd8688.bin",
@@ -191,6 +214,15 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
 	.supports_fw_dump = true,
 };
 
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8997 = {
+	.helper         = NULL,
+	.firmware       = "mrvl/sd8997_uapsta.bin",
+	.reg            = &btmrvl_reg_8997,
+	.support_pscan_win_report = true,
+	.sd_blksz_fw_dl = 256,
+	.supports_fw_dump = true,
+};
+
 static const struct sdio_device_id btmrvl_sdio_ids[] = {
 	/* Marvell SD8688 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
@@ -210,6 +242,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = {
 	/* Marvell SD8897 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912E),
 			.driver_data = (unsigned long)&btmrvl_sdio_sd8897 },
+	/* Marvell SD8997 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9142),
+			.driver_data = (unsigned long)&btmrvl_sdio_sd8997 },
 
 	{ }	/* Terminating entry */
 };
@@ -1622,3 +1657,4 @@ MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8887_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sd8997_uapsta.bin");
Signature · 1 line
1.8.1.4
maintainer
#2 lore raw

Re: [PATCH v2 2/2] Bluetooth: btmrvl: add sd8997 chipset support

Hi Amitkumar,

Quoted 6 lines

This patch adds support for Marvell's new chipset SD8997. Register offsets and supported feature flags are updated.

Quoted 7 lines

---
v2: Firmware name is corrected.
sdsd8997_combo.bin -> sd8997_uapsta.bin
---
drivers/bluetooth/Kconfig | 4 ++--
drivers/bluetooth/btmrvl_sdio.c | 36 ++++++++++++++++++++++++++++++++++++

2 files changed, 38 insertions(+), 2 deletions(-)

patch has been applied to bluetooth-next tree.

Regards

Marcel