NV12 rotation GTT handling prep work
Subsystems (2)
cover NV12 rotation GTT handling prep work
From: Tvrtko Ursulin <[email protected]>
GTT page remapping logic for 90/270 rotation needs some extensions to support NV12 90/270 rotation work which is currently underway.
Main thing is really to support building of the rotated page mapping from two planes instead of one, and adding appropriate calculations for the half-height UV plane geometry.
Those are stored in the existing rotation info data associated with the rotated view and are also used to return the appropriate plane start address when queried from the display code.
Tvrtko Ursulin (4):
drm/i915: Support planar formats in tile height calculations drm/i915: Support appending to the rotated pages mapping drm/i915: Support NV12 in rotated GGTT mapping drm/i915: Enable querying offset of UV plane with
intel_plane_obj_offset
drivers/gpu/drm/i915/i915_gem_gtt.c | 58 ++++++++++++++++++++++++++++-------- drivers/gpu/drm/i915/i915_gem_gtt.h | 4 +++ drivers/gpu/drm/i915/intel_display.c | 48 ++++++++++++++++++++++------- drivers/gpu/drm/i915/intel_drv.h | 6 ++-- drivers/gpu/drm/i915/intel_sprite.c | 4 +-- 5 files changed, 93 insertions(+), 27 deletions(-)
Signature · 6 lines
2.5.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 1/4 drm/i915: Support planar formats in tile height calculations
From: Tvrtko Ursulin <[email protected]>
This will be needed for NV12 support.
v2: Rebase.
--- drivers/gpu/drm/i915/intel_display.c | 10 +++++----- drivers/gpu/drm/i915/intel_drv.h | 2 +- drivers/gpu/drm/i915/intel_sprite.c | 2 +- 3 files changed, 7 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/intel_display.c +5 -5
@@ -2190,7 +2190,7 @@ static bool need_vtd_wa(struct drm_device *dev)unsigned int intel_tile_height (struct drm_device *dev,uint32_t pixel_format, -uint64_t fb_format_modifier) +uint64_t fb_format_modifier,unsigned int plane) {unsigned int tile_height;uint32_t pixel_bytes;
@@ -2206,7 +2206,7 @@ intel_tile_height(struct drm_device *dev, uint32_t pixel_format, tile_height =32 ;break ;case I915_FORMAT_MOD_Yf_TILED: - pixel_bytes =drm_format_plane_cpp (pixel_format,0 ); + pixel_bytes =drm_format_plane_cpp (pixel_format, plane);switch (pixel_bytes) {default :case 1 :
@@ -2240,7 +2240,7 @@ intel_fb_align_height(struct drm_device *dev, unsigned int height, uint32_t pixel_format, uint64_t fb_format_modifier) {return ALIGN (height,intel_tile_height (dev, pixel_format, - fb_format_modifier)); + fb_format_modifier,0 )); } static int
@@ -2266,7 +2266,7 @@ intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb, info->fb_modifier = fb->modifier[0 ]; tile_height =intel_tile_height (fb->dev, fb->pixel_format, - fb->modifier[0 ]); + fb->modifier[0 ],0 ); tile_pitch =PAGE_SIZE / tile_height; info->width_pages =DIV_ROUND_UP (fb->pitches[0 ], tile_pitch); info->height_pages =DIV_ROUND_UP (fb->height, tile_height);
@@ -3069,7 +3069,7 @@ static void skylake_update_primary_plane(struct drm_crtc *crtc,if (intel_rotation_90_or_270 (rotation)) {/* stride = Surface height in tiles */ tile_height =intel_tile_height (dev, fb->pixel_format, - fb->modifier[0 ]); + fb->modifier[0 ],0 ); stride =DIV_ROUND_UP (fb->height, tile_height); x_offset = stride * tile_height - y - src_h; y_offset = x;
drivers/gpu/drm/i915/intel_drv.h +1 -1
@@ -1085,7 +1085,7 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,unsigned int intel_tile_height (struct drm_device *dev,uint32_t pixel_format, -uint64_t fb_format_modifier); +uint64_t fb_format_modifier,unsigned int plane);static inline bool intel_rotation_90_or_270 (unsigned int rotation)
drivers/gpu/drm/i915/intel_sprite.c +1 -1
@@ -240,7 +240,7 @@ skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,if (intel_rotation_90_or_270 (rotation)) {/* stride: Surface height in tiles */ tile_height =intel_tile_height (dev, fb->pixel_format, - fb->modifier[0 ]); + fb->modifier[0 ],0 ); stride =DIV_ROUND_UP (fb->height, tile_height); plane_size = (src_w <<16 ) | src_h; x_offset = stride * tile_height - y - (src_h +1 );
Signature · 6 lines
2.5.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 1/4] drm/i915: Support planar formats in tile height calculations
Quoted 7 lines · Tvrtko Ursulin
From: Tvrtko Ursulin <[email protected]>
This will be needed for NV12 support.
v2: Rebase.
Signed-off-by Tvrtko Ursulin <[email protected]>
Quoted 86 lines
--- drivers/gpu/drm/i915/intel_display.c | 10 +++++----- drivers/gpu/drm/i915/intel_drv.h | 2 +- drivers/gpu/drm/i915/intel_sprite.c | 2 +- 3 files changed, 7 insertions(+), 7 deletions(-)drivers/gpu/drm/i915/intel_display.c +2
-2@@ -2190,7 +2190,7 @@ static bool need_vtd_wa(struct drm_device *dev)unsigned int intel_tile_height (struct drm_device *dev,uint32_t pixel_format, -uint64_t fb_format_modifier) +uint64_t fb_format_modifier,unsigned int plane) {unsigned int tile_height;uint32_t pixel_bytes;@@ -2206,7 +2206,7 @@ intel_tile_height(struct drm_device *dev,uint32_t pixel_format, tile_height =32 ;break ;case I915_FORMAT_MOD_Yf_TILED: - pixel_bytes =drm_format_plane_cpp (pixel_format,0 ); + pixel_bytes =drm_format_plane_cpp (pixel_format, plane);switch (pixel_bytes) {drivers/gpu/drm/i915/intel_display.c +1
-1default :case 1 :@@ -2240,7 +2240,7 @@ intel_fb_align_height(struct drm_device *dev,unsigned int height, uint32_t pixel_format, uint64_t fb_format_modifier) { return ALIGN(height, intel_tile_height(dev, pixel_format, -fb_format_modifier )); + fb_format_modifier, 0));}
static int
drivers/gpu/drm/i915/intel_display.c +1
-1@@ -2266,7 +2266,7 @@ intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb, info->fb_modifier = fb->modifier[0 ]; tile_height =intel_tile_height (fb->dev, fb->pixel_format, - fb->modifier[0 ]); + fb->modifier[0 ],0 ); tile_pitch =PAGE_SIZE / tile_height; info->width_pages = DIV_ROUND_UP(fb->pitches[0],
tile_pitch);drivers/gpu/drm/i915/intel_display.c +1
-2info->height_pages =DIV_ROUND_UP (fb->height, tile_height);@@ -3069,7 +3069,7 @@ static void skylake_update_primary_plane(structdrm_crtc *crtc, if (intel_rotation_90_or_270(rotation)) {/* stride = Surface height in tiles */ tile_height = intel_tile_height(dev, fb ->pixel_format, - fb->modifier[0 ]); + fb->modifier[0 ],0 ); stride =DIV_ROUND_UP (fb->height, tile_height); x_offset = stride * tile_height - y - src_h; y_offset = x;drivers/gpu/drm/i915/intel_drv.h +1
-1@@ -1085,7 +1085,7 @@ int intel_plane_atomic_calc_changes(structdrm_crtc_state *crtc_state, unsigned intintel_tile_height (struct drm_device *dev,uint32_t pixel_format, -uint64_t fb_format_modifier); +uint64_t fb_format_modifier,unsigned int plane); static inline bool
intel_rotation_90_or_270(unsigned int rotation)drivers/gpu/drm/i915/intel_sprite.c +0
-0
drivers/gpu/drm/i915/intel_sprite.c skl_update_plane(struct drm_plane *drm_plane, · line 246
Quoted 10 lines
drivers/gpu/drm/i915/intel_sprite.c +1
-2@@ -240,7 +240,7 @@ skl_update_plane(struct drm_plane *drm_plane,struct drm_crtc *crtc, if (intel_rotation_90_or_270(rotation)) {/* stride: Surface height in tiles */ tile_height = intel_tile_height(dev, fb ->pixel_format, - fb->modifier[0 ]); + fb->modifier[0 ],0 ); stride =DIV_ROUND_UP (fb->height, tile_height); plane_size = (src_w <<16 ) | src_h; x_offset = stride * tile_height - y - (src_h +1 );
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/4 drm/i915: Support appending to the rotated pages mapping
In reply to Tvrtko UrsulinFrom: Tvrtko Ursulin <[email protected]>
By providing a start offset into the source array of pages, and returning the end position in the scatter-gather table, we will be able to append the UV plane to the rotated mapping in later patches.
v2: Rebase.
--- drivers/gpu/drm/i915/i915_gem_gtt.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/i915_gem_gtt.c +13 -8
@@ -3234,15 +3234,18 @@ i915_gem_obj_lookup_or_create_ggtt_vma(struct drm_i915_gem_object *obj, } -static void -rotate_pages (dma_addr_t *in,unsigned int width,unsigned int height, -struct sg_table *st) +static struct scatterlist * +rotate_pages (dma_addr_t *in,unsigned int offset, +unsigned int width,unsigned int height, +struct sg_table *st,struct scatterlist *sg) {unsigned int column, row;unsigned int src_idx; -struct scatterlist *sg = st->sgl; - st->nents =0 ; +if (!sg) { + st->nents =0 ; + sg = st->sgl; + }for (column =0 ; column < width; column++) { src_idx = width * (height -1 ) + column;
@@ -3253,12 +3256,14 @@ rotate_pages(dma_addr_t *in, unsigned int width, unsigned int height,* The only thing we need are DMA addresses. */ sg_set_page (sg,NULL ,PAGE_SIZE ,0 ); -sg_dma_address (sg) = in[src_idx]; +sg_dma_address (sg) = in[offset + src_idx];sg_dma_len (sg) =PAGE_SIZE ; sg =sg_next (sg); src_idx -= width; } } + +return sg; } static struct sg_table *
@@ -3296,9 +3301,9 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view, }/* Rotate the pages. */ -rotate_pages (page_addr_list, +rotate_pages (page_addr_list,0 , rot_info->width_pages, rot_info->height_pages, - st); + st,NULL ); DRM_DEBUG_KMS( "Created rotated page mapping for object size %zu (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages).\n",
Signature · 6 lines
2.5.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/4] drm/i915: Support appending to the rotated pages mapping
Hi,
Quoted 11 lines · Tvrtko Ursulin
From: Tvrtko Ursulin <[email protected]>
By providing a start offset into the source array of pages, and returning the
end position in the scatter-gather table, we will be able to append the UV
plane to the rotated mapping in later patches.v2: Rebase.
Signed-off-by Tvrtko Ursulin <[email protected]>
Quoted 64 lines
--- drivers/gpu/drm/i915/i915_gem_gtt.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-)drivers/gpu/drm/i915/i915_gem_gtt.c +8
-5@@ -3234,15 +3234,18 @@ i915_gem_obj_lookup_or_create_ggtt_vma(structdrm_i915_gem_object *obj, } -static void -rotate_pages (dma_addr_t *in,unsigned int width,unsigned int height, -struct sg_table *st) +static struct scatterlist * +rotate_pages(dma_addr_t *in, unsigned int offset, + unsigned int width, unsigned int height, + struct sg_table *st, struct scatterlist *sg) { unsigned int column, row;unsigned int src_idx; -struct scatterlist *sg = st->sgl; - st->nents =0 ; +if (!sg) { + st->nents =0 ; + sg = st->sgl; + }drivers/gpu/drm/i915/i915_gem_gtt.c +3
-1for (column =0 ; column < width; column++) { src_idx = width * (height -1 ) + column;@@ -3253,12 +3256,14 @@ rotate_pages(dma_addr_t *in, unsigned intwidth, unsigned int height, * The only thing we need are DMA addresses. */ sg_set_page (sg,NULL ,PAGE_SIZE ,0 ); -sg_dma_address (sg) = in[src_idx]; +sg_dma_address (sg) = in[offset + src_idx];sg_dma_len (sg) =PAGE_SIZE ; sg =sg_next (sg); src_idx -= width; } } + +return sg; }static struct
sg_table*drivers/gpu/drm/i915/i915_gem_gtt.c +2
-2@@ -3296,9 +3301,9 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view, }/* Rotate the pages. */ -rotate_pages (page_addr_list, +rotate_pages (page_addr_list,0 , rot_info->width_pages, rot_info->height_pages, - st); + st,NULL ); DRM_DEBUG_KMS(
Quoted 3 lines
"Created rotated page mapping for object size
%zu (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages).\n",
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 3/4 drm/i915: Support NV12 in rotated GGTT mapping
In reply to Tvrtko UrsulinFrom: Tvrtko Ursulin <[email protected]>
Just adding the rotated UV plane at the end of the rotated Y plane.
v2: Rebase.
--- drivers/gpu/drm/i915/i915_gem_gtt.c | 37 ++++++++++++++++++++++++++++++------ drivers/gpu/drm/i915/i915_gem_gtt.h | 3 +++ drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++++ 3 files changed, 46 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/i915_gem_gtt.c +31 -6
@@ -3272,10 +3272,13 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view, {struct intel_rotation_info *rot_info = &ggtt_view->rotation_info;unsigned int size_pages = rot_info->size >>PAGE_SHIFT ; +unsigned int size_pages_uv;struct sg_page_iter sg_iter;unsigned long i;dma_addr_t *page_addr_list;struct sg_table *st; +unsigned int uv_start_page; +struct scatterlist *sg;int ret = -ENOMEM ;/* Allocate a temporary list of source pages for random access. */
@@ -3284,12 +3287,18 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view,if (!page_addr_list)return ERR_PTR (ret); +/* Account for UV plane with NV12. */ +if (rot_info->pixel_format ==DRM_FORMAT_NV12 ) + size_pages_uv = rot_info->size_uv >>PAGE_SHIFT ; +else + size_pages_uv =0 ; +/* Allocate target SG list. */ st =kmalloc (sizeof (*st),GFP_KERNEL );if (!st) goto err_st_alloc; - ret =sg_alloc_table (st, size_pages,GFP_KERNEL ); + ret =sg_alloc_table (st, size_pages + size_pages_uv,GFP_KERNEL );if (ret) goto err_sg_alloc;
@@ -3301,15 +3310,30 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view, }/* Rotate the pages. */ -rotate_pages (page_addr_list,0 , + sg =rotate_pages (page_addr_list,0 , rot_info->width_pages, rot_info->height_pages, st,NULL ); +/* Append the UV plane if NV12. */ +if (rot_info->pixel_format ==DRM_FORMAT_NV12 ) { + uv_start_page = size_pages; + +/* Check for tile-row un-alignment. */ +if (offset_in_page (rot_info->uv_offset)) + uv_start_page--; + +rotate_pages (page_addr_list, uv_start_page, + rot_info->width_pages_uv, + rot_info->height_pages_uv, + st, sg); + } +DRM_DEBUG_KMS ( -"Created rotated page mapping for object size %zu (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages).\n" , +"Created rotated page mapping for object size %zu (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages (%u plane 0)).\n" , obj->base.size, rot_info->pitch, rot_info->height, rot_info->pixel_format, rot_info->width_pages, - rot_info->height_pages, size_pages); + rot_info->height_pages, size_pages + size_pages_uv, + size_pages);drm_free_large (page_addr_list);
@@ -3321,10 +3345,11 @@ err_st_alloc:drm_free_large (page_addr_list);DRM_DEBUG_KMS ( -"Failed to create rotated mapping for object size %zu! (%d) (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages)\n" , +"Failed to create rotated mapping for object size %zu! (%d) (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages (%u plane 0))\n" , obj->base.size, ret, rot_info->pitch, rot_info->height, rot_info->pixel_format, rot_info->width_pages, - rot_info->height_pages, size_pages); + rot_info->height_pages, size_pages + size_pages_uv, + size_pages);return ERR_PTR (ret); }
drivers/gpu/drm/i915/i915_gem_gtt.h +3 -0
@@ -138,10 +138,13 @@ enum i915_ggtt_view_type {struct intel_rotation_info {unsigned int height;unsigned int pitch; +unsigned int uv_offset;uint32_t pixel_format;uint64_t fb_modifier;unsigned int width_pages, height_pages;uint64_t size; +unsigned int width_pages_uv, height_pages_uv; +uint64_t size_uv; };struct i915_ggtt_view {
drivers/gpu/drm/i915/intel_display.c +12 -0
@@ -2263,6 +2263,7 @@ intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb, info->height = fb->height; info->pixel_format = fb->pixel_format; info->pitch = fb->pitches[0 ]; + info->uv_offset = fb->offsets[1 ]; info->fb_modifier = fb->modifier[0 ]; tile_height = intel_tile_height(fb->dev, fb->pixel_format,
@@ -2272,6 +2273,17 @@ intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb, info->height_pages =DIV_ROUND_UP (fb->height, tile_height); info->size = info->width_pages * info->height_pages *PAGE_SIZE ; +if (info->pixel_format ==DRM_FORMAT_NV12 ) { + tile_height =intel_tile_height (fb->dev, fb->pixel_format, + fb->modifier[0 ],1 ); + tile_pitch =PAGE_SIZE / tile_height; + info->width_pages_uv =DIV_ROUND_UP (fb->pitches[0 ], tile_pitch); + info->height_pages_uv =DIV_ROUND_UP (fb->height /2 , + tile_height); + info->size_uv = info->width_pages_uv * info->height_pages_uv * +PAGE_SIZE ; + } +return 0 ; }
Signature · 6 lines
2.5.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 3/4] drm/i915: Support NV12 in rotated GGTT mapping
Quoted 9 lines · Tvrtko Ursulin
From: Tvrtko Ursulin <[email protected]>
Just adding the rotated UV plane at the end of the rotated Y plane.
v2: Rebase.
Signed-off-by Tvrtko Ursulin <[email protected]>
One comment below, otherwise.
Quoted 13 lines
--- drivers/gpu/drm/i915/i915_gem_gtt.c | 37 ++++++++++++++++++++++++++++++------ drivers/gpu/drm/i915/i915_gem_gtt.h | 3 +++ drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++++ 3 files changed, 46 insertions(+), 6 deletions(-)drivers/gpu/drm/i915/i915_gem_gtt.c +0
-0
drivers/gpu/drm/i915/i915_gem_gtt.c intel_rotate_fb_obj_pages(struct · line 3276
Quoted 6 lines
drivers/gpu/drm/i915/i915_gem_gtt.c +1
-1@@ -3272,10 +3272,13 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view, { > > struct intel_rotation_info *rot_info = &ggtt_view ->rotation_info; > > unsigned int size_pages = rot_info->size >> PAGE_SHIFT; +> > unsigned int size_pages_uv;
Could be initialized to zero here already as majority of the time it'll be unchanged.
Quoted 146 lines
drivers/gpu/drm/i915/i915_gem_gtt.c +2
-0> > struct sg_page_iter sg_iter; > > unsigned long i; > > dma_addr_t *page_addr_list; > > struct sg_table *st; +> > unsigned int uv_start_page; +> > struct scatterlist *sg; > > int ret = -ENOMEM; > > /* Allocate a temporary list of source pages for randomaccess. */
drivers/gpu/drm/i915/i915_gem_gtt.c +7
-1@@ -3284,12 +3287,18 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view, > > if (!page_addr_list) > > > return ERR_PTR(ret); +> > /* Account for UV plane with NV12. */ +> > if (rot_info->pixel_format == DRM_FORMAT_NV12) +> > > size_pages_uv = rot_info->size_uv >> PAGE_SHIFT; +> > else +> > > size_pages_uv = 0; + > > /* Allocate target SG list. */ > > st = kmalloc(sizeof(*st), GFP_KERNEL); > > if (!st) > > > goto err_st_alloc; -> > ret = sg_alloc_table(st, size_pages, GFP_KERNEL); +> > ret = sg_alloc_table(st, size_pages + size_pages_uv,GFP_KERNEL ); > > if (ret)Quoted 1 line
> > goto err_sg_alloc;drivers/gpu/drm/i915/i915_gem_gtt.c +15
-2@@ -3301,15 +3310,30 @@ intel_rotate_fb_obj_pages(structi915_ggtt_view *ggtt_view, > > } > > /* Rotate the pages. */ -> > rotate_pages(page_addr_list, 0, +> > sg = rotate_pages(page_addr_list, 0, > > > rot_info->width_pages, rot_info->height_pages, > > > st, NULL); +> > /* Append the UV plane if NV12. */ +> > if (rot_info->pixel_format == DRM_FORMAT_NV12) { +> > > uv_start_page = size_pages; + +> > > /* Check for tile-row un-alignment. */ +> > > if (offset_in_page(rot_info->uv_offset)) +> > > > uv_start_page--; + +> > > rotate_pages(page_addr_list, uv_start_page, +> > > > rot_info->width_pages_uv, +> > > > rot_info->height_pages_uv, +> > > > st, sg); +> > } + > > DRM_DEBUG_KMS( -> > > "Created rotated page mapping for object size%zu (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages).\n",
+> > > "Created rotated page mapping for object size
%zu (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages (%u plane 0)).\n",Quoted 1 line
> > obj->base.size, rot_info->pitch, rot_info->height,
Quoted 1 line
> > rot_info->pixel_format, rot_info->width_pages,-> > >
rot_info->height_pages,size_pages);
+> > >rot_info->height_pages,size_pages+size_pages_uv,
+> > >size_pages);Quoted 1 line
> drm_free_large(page_addr_list);drivers/gpu/drm/i915/i915_gem_gtt.c +2
-3@@ -3321,10 +3345,11 @@ err_st_alloc: > > drm_free_large(page_addr_list); > > DRM_DEBUG_KMS( -> > > "Failed to create rotated mapping for object size %zu! (%d) (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages)\n", +> > > "Failed to create rotated mapping for object size %zu! (%d) (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages (%u plane 0))\n", > > > obj->base.size, ret, rot_info->pitch, rot_info ->height, > > > rot_info->pixel_format, rot_info->width_pages, -> > > rot_info->height_pages, size_pages); +> > > rot_info->height_pages, size_pages +
size_pages_uv,
+> > >size_pages);Quoted 1 line
> return ERR_PTR(ret);}
drivers/gpu/drm/i915/i915_gem_gtt.h +3
-0@@ -138,10 +138,13 @@ enum i915_ggtt_view_type {struct intel_rotation_info { > > unsigned int height; > > unsigned int pitch; +> > unsigned int uv_offset; > > uint32_t pixel_format; > > uint64_t fb_modifier; > > unsigned int width_pages, height_pages; > > uint64_t size; +> > unsigned int width_pages_uv, height_pages_uv; +> > uint64_t size_uv; };struct i915_ggtt_view {drivers/gpu/drm/i915/intel_display.c +1
-0@@ -2263,6 +2263,7 @@ intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb, > > info->height = fb->height; > > info->pixel_format = fb->pixel_format; > > info->pitch = fb->pitches[0]; +> > info->uv_offset = fb->offsets[1]; > > info->fb_modifier = fb->modifier[0];Quoted 1 line
> tile_height = intel_tile_height(fb->dev, fb->pixel_format,drivers/gpu/drm/i915/intel_display.c +5
-1@@ -2272,6 +2273,17 @@ intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb, > > info->height_pages = DIV_ROUND_UP(fb->height, tile_height); > > info->size = info->width_pages * info->height_pages *PAGE_SIZE ; +> > if (info->pixel_format == DRM_FORMAT_NV12) { +> > > tile_height = intel_tile_height(fb->dev, fb ->pixel_format, +> > > > > > > fb->modifier[0], 1); +> > > tile_pitch = PAGE_SIZE / tile_height; +> > > info->width_pages_uv = DIV_ROUND_UP(fb->pitches[0],
tile_pitch);
+> > >info->height_pages_uv= DIV_ROUND_UP(fb->height / 2,
+> > > > > > >tile_height);
+> > >info->size_uv=info->width_pages_uv* info
->height_pages_uv *
+> > > > >PAGE_SIZE;
+> > }
+
Quoted 3 lines
Quoted 1 line
> return 0;}
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 3/4] drm/i915: Support NV12 in rotated GGTT mapping
Quoted 22 lines · Joonas Lahtinen
Quoted 9 lines · Tvrtko Ursulin
From: Tvrtko Ursulin <[email protected]>
Just adding the rotated UV plane at the end of the rotated Y plane.
v2: Rebase.
Signed-off-by Tvrtko Ursulin <[email protected]>One comment below, otherwise.
Reviewed-by Joonas Lahtinen <[email protected]>Quoted 7 lines
--- drivers/gpu/drm/i915/i915_gem_gtt.c | 37 ++++++++++++++++++++++++++++++------ drivers/gpu/drm/i915/i915_gem_gtt.h | 3 +++ drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++++ 3 files changed, 46 insertions(+), 6 deletions(-)
Quoted 15 lines
drivers/gpu/drm/i915/i915_gem_gtt.c intel_rotate_fb_obj_pages(struct · line 3276
Quoted 12 lines
drivers/gpu/drm/i915/i915_gem_gtt.c +1
-1@@ -3272,10 +3272,13 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view, { > > struct intel_rotation_info *rot_info = &ggtt_view ->rotation_info; > > unsigned int size_pages = rot_info->size >> PAGE_SHIFT; +> > unsigned int size_pages_uv;Could be initialized to zero here already as majority of the time it'll be unchanged.
Personally (and this is really pretty clearly in bikeshed territory) I prefer it like Tvrtko has done since if you ever rework the code for new platform support and forget one case gcc will complain about potentially uninitialized variable. But if you initialize it at first that will paper over such a bug. And gcc will optimize this anyway for you (besides that generally performance in modeset code just doesn't really matter all that much).
And something funny is going on with your mail replies, you insert piles of spurious > even though it's just one reply level ... -Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 3/4] drm/i915: Support NV12 in rotated GGTT mapping
In reply to Tvrtko UrsulinQuoted 122 lines · Tvrtko Ursulin
From: Tvrtko Ursulin <[email protected]>
Just adding the rotated UV plane at the end of the rotated Y plane.
v2: Rebase.
Signed-off-by Tvrtko Ursulin <[email protected]>--- drivers/gpu/drm/i915/i915_gem_gtt.c | 37 ++++++++++++++++++++++++++++++------ drivers/gpu/drm/i915/i915_gem_gtt.h | 3 +++ drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++++ 3 files changed, 46 insertions(+), 6 deletions(-)drivers/gpu/drm/i915/i915_gem_gtt.c +31
-6@@ -3272,10 +3272,13 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view, {struct intel_rotation_info *rot_info = &ggtt_view->rotation_info;unsigned int size_pages = rot_info->size >>PAGE_SHIFT ; +unsigned int size_pages_uv;struct sg_page_iter sg_iter;unsigned long i;dma_addr_t *page_addr_list;struct sg_table *st; +unsigned int uv_start_page; +struct scatterlist *sg;int ret = -ENOMEM ;/* Allocate a temporary list of source pages for random access. */ @@ -3284,12 +3287,18 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view,if (!page_addr_list)return ERR_PTR (ret); +/* Account for UV plane with NV12. */ +if (rot_info->pixel_format ==DRM_FORMAT_NV12 ) + size_pages_uv = rot_info->size_uv >>PAGE_SHIFT ; +else + size_pages_uv =0 ; +/* Allocate target SG list. */ st =kmalloc (sizeof (*st),GFP_KERNEL );if (!st) goto err_st_alloc; - ret =sg_alloc_table (st, size_pages,GFP_KERNEL ); + ret =sg_alloc_table (st, size_pages + size_pages_uv,GFP_KERNEL );if (ret) goto err_sg_alloc;@@ -3301,15 +3310,30 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view, }/* Rotate the pages. */ -rotate_pages (page_addr_list,0 , + sg =rotate_pages (page_addr_list,0 , rot_info->width_pages, rot_info->height_pages, st,NULL ); +/* Append the UV plane if NV12. */ +if (rot_info->pixel_format ==DRM_FORMAT_NV12 ) { + uv_start_page = size_pages; + +/* Check for tile-row un-alignment. */ +if (offset_in_page (rot_info->uv_offset)) + uv_start_page--; + +rotate_pages (page_addr_list, uv_start_page, + rot_info->width_pages_uv, + rot_info->height_pages_uv, + st, sg); + } +DRM_DEBUG_KMS ( -"Created rotated page mapping for object size %zu (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages).\n" , +"Created rotated page mapping for object size %zu (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages (%u plane 0)).\n" , obj->base.size, rot_info->pitch, rot_info->height, rot_info->pixel_format, rot_info->width_pages, - rot_info->height_pages, size_pages); + rot_info->height_pages, size_pages + size_pages_uv, + size_pages);drm_free_large (page_addr_list);@@ -3321,10 +3345,11 @@ err_st_alloc:drm_free_large (page_addr_list);DRM_DEBUG_KMS ( -"Failed to create rotated mapping for object size %zu! (%d) (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages)\n" , +"Failed to create rotated mapping for object size %zu! (%d) (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages (%u plane 0))\n" , obj->base.size, ret, rot_info->pitch, rot_info->height, rot_info->pixel_format, rot_info->width_pages, - rot_info->height_pages, size_pages); + rot_info->height_pages, size_pages + size_pages_uv, + size_pages);return ERR_PTR (ret); }drivers/gpu/drm/i915/i915_gem_gtt.h +3
-0@@ -138,10 +138,13 @@ enum i915_ggtt_view_type {struct intel_rotation_info {unsigned int height;unsigned int pitch; +unsigned int uv_offset;uint32_t pixel_format;uint64_t fb_modifier;unsigned int width_pages, height_pages;uint64_t size; +unsigned int width_pages_uv, height_pages_uv; +uint64_t size_uv; };struct i915_ggtt_view {drivers/gpu/drm/i915/intel_display.c +0
-0
drivers/gpu/drm/i915/intel_display.c intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb, · line 2266
Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c +1
-0@@ -2263,6 +2263,7 @@ intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb, info->height = fb->height; info->pixel_format = fb->pixel_format; info->pitch = fb->pitches[0 ]; + info->uv_offset = fb->offsets[1 ];
OK, so this already came up a bit when I was looking at Chandra's stuff, but we really have to define what fb->offsets[] means now.
On one hand, it would be very logical for it to be a raw byte offset into the object where the fb starts. But on the other hand that perhaps makes it a bit more difficult for userspace to compute offsets[1] for the CbCr plane. Also we have fences to consider, and currently we even require that the fence stride matches the fb stride, even though that may not really be necessary. So maybe it should be the linear offset instead.
So which way should we go?
Quoted 28 lines
drivers/gpu/drm/i915/intel_display.c +11
-0info->fb_modifier = fb->modifier[0 ]; tile_height = intel_tile_height(fb->dev, fb->pixel_format,@@ -2272,6 +2273,17 @@ intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb, info->height_pages =DIV_ROUND_UP (fb->height, tile_height); info->size = info->width_pages * info->height_pages *PAGE_SIZE ; +if (info->pixel_format ==DRM_FORMAT_NV12 ) { + tile_height =intel_tile_height (fb->dev, fb->pixel_format, + fb->modifier[0 ],1 ); + tile_pitch =PAGE_SIZE / tile_height; + info->width_pages_uv =DIV_ROUND_UP (fb->pitches[0 ], tile_pitch); + info->height_pages_uv =DIV_ROUND_UP (fb->height /2 , + tile_height); + info->size_uv = info->width_pages_uv * info->height_pages_uv * +PAGE_SIZE ; + } +return 0 ; }Signature · 6 lines
2.5.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 3/4] drm/i915: Support NV12 in rotated GGTT mapping
Quoted 139 lines · Ville Syrjälä
Quoted 122 lines · Tvrtko Ursulin
From: Tvrtko Ursulin <[email protected]>
Just adding the rotated UV plane at the end of the rotated Y plane.
v2: Rebase.
Signed-off-by Tvrtko Ursulin <[email protected]>--- drivers/gpu/drm/i915/i915_gem_gtt.c | 37 ++++++++++++++++++++++++++++++------ drivers/gpu/drm/i915/i915_gem_gtt.h | 3 +++ drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++++ 3 files changed, 46 insertions(+), 6 deletions(-)drivers/gpu/drm/i915/i915_gem_gtt.c +31
-6@@ -3272,10 +3272,13 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view, {struct intel_rotation_info *rot_info = &ggtt_view->rotation_info;unsigned int size_pages = rot_info->size >>PAGE_SHIFT ; +unsigned int size_pages_uv;struct sg_page_iter sg_iter;unsigned long i;dma_addr_t *page_addr_list;struct sg_table *st; +unsigned int uv_start_page; +struct scatterlist *sg;int ret = -ENOMEM ;/* Allocate a temporary list of source pages for random access. */ @@ -3284,12 +3287,18 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view,if (!page_addr_list)return ERR_PTR (ret); +/* Account for UV plane with NV12. */ +if (rot_info->pixel_format ==DRM_FORMAT_NV12 ) + size_pages_uv = rot_info->size_uv >>PAGE_SHIFT ; +else + size_pages_uv =0 ; +/* Allocate target SG list. */ st =kmalloc (sizeof (*st),GFP_KERNEL );if (!st) goto err_st_alloc; - ret =sg_alloc_table (st, size_pages,GFP_KERNEL ); + ret =sg_alloc_table (st, size_pages + size_pages_uv,GFP_KERNEL );if (ret) goto err_sg_alloc;@@ -3301,15 +3310,30 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view, }/* Rotate the pages. */ -rotate_pages (page_addr_list,0 , + sg =rotate_pages (page_addr_list,0 , rot_info->width_pages, rot_info->height_pages, st,NULL ); +/* Append the UV plane if NV12. */ +if (rot_info->pixel_format ==DRM_FORMAT_NV12 ) { + uv_start_page = size_pages; + +/* Check for tile-row un-alignment. */ +if (offset_in_page (rot_info->uv_offset)) + uv_start_page--; + +rotate_pages (page_addr_list, uv_start_page, + rot_info->width_pages_uv, + rot_info->height_pages_uv, + st, sg); + } +DRM_DEBUG_KMS ( -"Created rotated page mapping for object size %zu (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages).\n" , +"Created rotated page mapping for object size %zu (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages (%u plane 0)).\n" , obj->base.size, rot_info->pitch, rot_info->height, rot_info->pixel_format, rot_info->width_pages, - rot_info->height_pages, size_pages); + rot_info->height_pages, size_pages + size_pages_uv, + size_pages);drm_free_large (page_addr_list);@@ -3321,10 +3345,11 @@ err_st_alloc:drm_free_large (page_addr_list);DRM_DEBUG_KMS ( -"Failed to create rotated mapping for object size %zu! (%d) (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages)\n" , +"Failed to create rotated mapping for object size %zu! (%d) (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages (%u plane 0))\n" , obj->base.size, ret, rot_info->pitch, rot_info->height, rot_info->pixel_format, rot_info->width_pages, - rot_info->height_pages, size_pages); + rot_info->height_pages, size_pages + size_pages_uv, + size_pages);return ERR_PTR (ret); }drivers/gpu/drm/i915/i915_gem_gtt.h +3
-0@@ -138,10 +138,13 @@ enum i915_ggtt_view_type {struct intel_rotation_info {unsigned int height;unsigned int pitch; +unsigned int uv_offset;uint32_t pixel_format;uint64_t fb_modifier;unsigned int width_pages, height_pages;uint64_t size; +unsigned int width_pages_uv, height_pages_uv; +uint64_t size_uv; };struct i915_ggtt_view {drivers/gpu/drm/i915/intel_display.c +0
-0drivers/gpu/drm/i915/intel_display.c intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb, · line 2266
Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c +1
-0@@ -2263,6 +2263,7 @@ intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb, info->height = fb->height; info->pixel_format = fb->pixel_format; info->pitch = fb->pitches[0 ]; + info->uv_offset = fb->offsets[1 ];OK, so this already came up a bit when I was looking at Chandra's stuff, but we really have to define what fb->offsets[] means now.
On one hand, it would be very logical for it to be a raw byte offset into the object where the fb starts. But on the other hand that perhaps makes it a bit more difficult for userspace to compute offsets[1] for the CbCr plane. Also we have fences to consider, and currently we even require that the fence stride matches the fb stride, even though that may not really be necessary. So maybe it should be the linear offset instead.
Quoted 1 line
So which way should we go?
No idea, I'm afraid I don't have the wide enough knowledge on this one to contribute hugely.
Why would it be difficult for userspace to compute a byte offset to the UV plane though? Presumably it had to know it already to have rendered anything - otherwise why and how would it be giving this frame buffer to the kernel?
Regards,
Tvrtko
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 3/4] drm/i915: Support NV12 in rotated GGTT mapping
Quoted 143 lines · Tvrtko Ursulin
Quoted 139 lines · Ville Syrjälä
Quoted 122 lines · Tvrtko Ursulin
From: Tvrtko Ursulin <[email protected]>
Just adding the rotated UV plane at the end of the rotated Y plane.
v2: Rebase.
Signed-off-by Tvrtko Ursulin <[email protected]>--- drivers/gpu/drm/i915/i915_gem_gtt.c | 37 ++++++++++++++++++++++++++++++------ drivers/gpu/drm/i915/i915_gem_gtt.h | 3 +++ drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++++ 3 files changed, 46 insertions(+), 6 deletions(-)drivers/gpu/drm/i915/i915_gem_gtt.c +31
-6@@ -3272,10 +3272,13 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view, {struct intel_rotation_info *rot_info = &ggtt_view->rotation_info;unsigned int size_pages = rot_info->size >>PAGE_SHIFT ; +unsigned int size_pages_uv;struct sg_page_iter sg_iter;unsigned long i;dma_addr_t *page_addr_list;struct sg_table *st; +unsigned int uv_start_page; +struct scatterlist *sg;int ret = -ENOMEM ;/* Allocate a temporary list of source pages for random access. */ @@ -3284,12 +3287,18 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view,if (!page_addr_list)return ERR_PTR (ret); +/* Account for UV plane with NV12. */ +if (rot_info->pixel_format ==DRM_FORMAT_NV12 ) + size_pages_uv = rot_info->size_uv >>PAGE_SHIFT ; +else + size_pages_uv =0 ; +/* Allocate target SG list. */ st =kmalloc (sizeof (*st),GFP_KERNEL );if (!st) goto err_st_alloc; - ret =sg_alloc_table (st, size_pages,GFP_KERNEL ); + ret =sg_alloc_table (st, size_pages + size_pages_uv,GFP_KERNEL );if (ret) goto err_sg_alloc;@@ -3301,15 +3310,30 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view, }/* Rotate the pages. */ -rotate_pages (page_addr_list,0 , + sg =rotate_pages (page_addr_list,0 , rot_info->width_pages, rot_info->height_pages, st,NULL ); +/* Append the UV plane if NV12. */ +if (rot_info->pixel_format ==DRM_FORMAT_NV12 ) { + uv_start_page = size_pages; + +/* Check for tile-row un-alignment. */ +if (offset_in_page (rot_info->uv_offset)) + uv_start_page--; + +rotate_pages (page_addr_list, uv_start_page, + rot_info->width_pages_uv, + rot_info->height_pages_uv, + st, sg); + } +DRM_DEBUG_KMS ( -"Created rotated page mapping for object size %zu (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages).\n" , +"Created rotated page mapping for object size %zu (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages (%u plane 0)).\n" , obj->base.size, rot_info->pitch, rot_info->height, rot_info->pixel_format, rot_info->width_pages, - rot_info->height_pages, size_pages); + rot_info->height_pages, size_pages + size_pages_uv, + size_pages);drm_free_large (page_addr_list);@@ -3321,10 +3345,11 @@ err_st_alloc:drm_free_large (page_addr_list);DRM_DEBUG_KMS ( -"Failed to create rotated mapping for object size %zu! (%d) (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages)\n" , +"Failed to create rotated mapping for object size %zu! (%d) (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages (%u plane 0))\n" , obj->base.size, ret, rot_info->pitch, rot_info->height, rot_info->pixel_format, rot_info->width_pages, - rot_info->height_pages, size_pages); + rot_info->height_pages, size_pages + size_pages_uv, + size_pages);return ERR_PTR (ret); }drivers/gpu/drm/i915/i915_gem_gtt.h +3
-0@@ -138,10 +138,13 @@ enum i915_ggtt_view_type {struct intel_rotation_info {unsigned int height;unsigned int pitch; +unsigned int uv_offset;uint32_t pixel_format;uint64_t fb_modifier;unsigned int width_pages, height_pages;uint64_t size; +unsigned int width_pages_uv, height_pages_uv; +uint64_t size_uv; };struct i915_ggtt_view {drivers/gpu/drm/i915/intel_display.c +0
-0drivers/gpu/drm/i915/intel_display.c intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb, · line 2266
Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c +1
-0@@ -2263,6 +2263,7 @@ intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb, info->height = fb->height; info->pixel_format = fb->pixel_format; info->pitch = fb->pitches[0 ]; + info->uv_offset = fb->offsets[1 ];OK, so this already came up a bit when I was looking at Chandra's stuff, but we really have to define what fb->offsets[] means now.
On one hand, it would be very logical for it to be a raw byte offset into the object where the fb starts. But on the other hand that perhaps makes it a bit more difficult for userspace to compute offsets[1] for the CbCr plane. Also we have fences to consider, and currently we even require that the fence stride matches the fb stride, even though that may not really be necessary. So maybe it should be the linear offset instead.
Quoted 1 line
So which way should we go?
Quoted 7 lines
No idea, I'm afraid I don't have the wide enough knowledge on this one to contribute hugely.
Why would it be difficult for userspace to compute a byte offset to the UV plane though? Presumably it had to know it already to have rendered anything - otherwise why and how would it be giving this frame buffer to the kernel?
Well, it's not difficult per say, but it would have to know the tile dimensions to do it. When using a linear offset, the tile dimensions are mostly meaningless, although some of the hw restrictions (stride must be tile aligned, and CbCr plane must start at somewhat aligned offset at least sometimes) does blow a hole to that theory a bit.
I suppose it's not really a huge deal which way we go, we just have to pick one and stick with it, and document it.
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 3/4] drm/i915: Support NV12 in rotated GGTT mapping
Quoted 152 lines · Ville Syrjälä
Quoted 143 lines · Tvrtko Ursulin
Quoted 139 lines · Ville Syrjälä
Quoted 122 lines · Tvrtko Ursulin
From: Tvrtko Ursulin <[email protected]>
Just adding the rotated UV plane at the end of the rotated Y plane.
v2: Rebase.
Signed-off-by Tvrtko Ursulin <[email protected]>--- drivers/gpu/drm/i915/i915_gem_gtt.c | 37 ++++++++++++++++++++++++++++++------ drivers/gpu/drm/i915/i915_gem_gtt.h | 3 +++ drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++++ 3 files changed, 46 insertions(+), 6 deletions(-)drivers/gpu/drm/i915/i915_gem_gtt.c +31
-6@@ -3272,10 +3272,13 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view, {struct intel_rotation_info *rot_info = &ggtt_view->rotation_info;unsigned int size_pages = rot_info->size >>PAGE_SHIFT ; +unsigned int size_pages_uv;struct sg_page_iter sg_iter;unsigned long i;dma_addr_t *page_addr_list;struct sg_table *st; +unsigned int uv_start_page; +struct scatterlist *sg;int ret = -ENOMEM ;/* Allocate a temporary list of source pages for random access. */ @@ -3284,12 +3287,18 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view,if (!page_addr_list)return ERR_PTR (ret); +/* Account for UV plane with NV12. */ +if (rot_info->pixel_format ==DRM_FORMAT_NV12 ) + size_pages_uv = rot_info->size_uv >>PAGE_SHIFT ; +else + size_pages_uv =0 ; +/* Allocate target SG list. */ st =kmalloc (sizeof (*st),GFP_KERNEL );if (!st) goto err_st_alloc; - ret =sg_alloc_table (st, size_pages,GFP_KERNEL ); + ret =sg_alloc_table (st, size_pages + size_pages_uv,GFP_KERNEL );if (ret) goto err_sg_alloc;@@ -3301,15 +3310,30 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view, }/* Rotate the pages. */ -rotate_pages (page_addr_list,0 , + sg =rotate_pages (page_addr_list,0 , rot_info->width_pages, rot_info->height_pages, st,NULL ); +/* Append the UV plane if NV12. */ +if (rot_info->pixel_format ==DRM_FORMAT_NV12 ) { + uv_start_page = size_pages; + +/* Check for tile-row un-alignment. */ +if (offset_in_page (rot_info->uv_offset)) + uv_start_page--; + +rotate_pages (page_addr_list, uv_start_page, + rot_info->width_pages_uv, + rot_info->height_pages_uv, + st, sg); + } +DRM_DEBUG_KMS ( -"Created rotated page mapping for object size %zu (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages).\n" , +"Created rotated page mapping for object size %zu (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages (%u plane 0)).\n" , obj->base.size, rot_info->pitch, rot_info->height, rot_info->pixel_format, rot_info->width_pages, - rot_info->height_pages, size_pages); + rot_info->height_pages, size_pages + size_pages_uv, + size_pages);drm_free_large (page_addr_list);@@ -3321,10 +3345,11 @@ err_st_alloc:drm_free_large (page_addr_list);DRM_DEBUG_KMS ( -"Failed to create rotated mapping for object size %zu! (%d) (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages)\n" , +"Failed to create rotated mapping for object size %zu! (%d) (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages (%u plane 0))\n" , obj->base.size, ret, rot_info->pitch, rot_info->height, rot_info->pixel_format, rot_info->width_pages, - rot_info->height_pages, size_pages); + rot_info->height_pages, size_pages + size_pages_uv, + size_pages);return ERR_PTR (ret); }drivers/gpu/drm/i915/i915_gem_gtt.h +3
-0@@ -138,10 +138,13 @@ enum i915_ggtt_view_type {struct intel_rotation_info {unsigned int height;unsigned int pitch; +unsigned int uv_offset;uint32_t pixel_format;uint64_t fb_modifier;unsigned int width_pages, height_pages;uint64_t size; +unsigned int width_pages_uv, height_pages_uv; +uint64_t size_uv; };struct i915_ggtt_view {drivers/gpu/drm/i915/intel_display.c +0
-0drivers/gpu/drm/i915/intel_display.c intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb, · line 2266
Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c +1
-0@@ -2263,6 +2263,7 @@ intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb, info->height = fb->height; info->pixel_format = fb->pixel_format; info->pitch = fb->pitches[0 ]; + info->uv_offset = fb->offsets[1 ];OK, so this already came up a bit when I was looking at Chandra's stuff, but we really have to define what fb->offsets[] means now.
On one hand, it would be very logical for it to be a raw byte offset into the object where the fb starts. But on the other hand that perhaps makes it a bit more difficult for userspace to compute offsets[1] for the CbCr plane. Also we have fences to consider, and currently we even require that the fence stride matches the fb stride, even though that may not really be necessary. So maybe it should be the linear offset instead.
Quoted 1 line
So which way should we go?
Quoted 7 lines
No idea, I'm afraid I don't have the wide enough knowledge on this one to contribute hugely.
Why would it be difficult for userspace to compute a byte offset to the UV plane though? Presumably it had to know it already to have rendered anything - otherwise why and how would it be giving this frame buffer to the kernel?
Quoted 8 lines
Well, it's not difficult per say, but it would have to know the tile dimensions to do it. When using a linear offset, the tile dimensions are mostly meaningless, although some of the hw restrictions (stride must be tile aligned, and CbCr plane must start at somewhat aligned offset at least sometimes) does blow a hole to that theory a bit.
I suppose it's not really a huge deal which way we go, we just have to pick one and stick with it, and document it.
Hm I kinda assumed that for tiled layouts plane offsets must be tile-aligned for everyone. Since tiling is now a separate part with the fb modifiers I'd go with using it as the linear offset. But definitely needs to be documented with a kerneldoc pathc somewhere ...
-Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 3/4] drm/i915: Support NV12 in rotated GGTT mapping
Quoted 159 lines · Daniel Vetter
Quoted 158 lines · Ville Syrjälä
Quoted 143 lines · Tvrtko Ursulin
Quoted 139 lines · Ville Syrjälä
Quoted 122 lines · Tvrtko Ursulin
From: Tvrtko Ursulin <[email protected]>
Just adding the rotated UV plane at the end of the rotated Y plane.
v2: Rebase.
Signed-off-by Tvrtko Ursulin <[email protected]>--- drivers/gpu/drm/i915/i915_gem_gtt.c | 37 ++++++++++++++++++++++++++++++------ drivers/gpu/drm/i915/i915_gem_gtt.h | 3 +++ drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++++ 3 files changed, 46 insertions(+), 6 deletions(-)drivers/gpu/drm/i915/i915_gem_gtt.c +31
-6@@ -3272,10 +3272,13 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view, {struct intel_rotation_info *rot_info = &ggtt_view->rotation_info;unsigned int size_pages = rot_info->size >>PAGE_SHIFT ; +unsigned int size_pages_uv;struct sg_page_iter sg_iter;unsigned long i;dma_addr_t *page_addr_list;struct sg_table *st; +unsigned int uv_start_page; +struct scatterlist *sg;int ret = -ENOMEM ;/* Allocate a temporary list of source pages for random access. */ @@ -3284,12 +3287,18 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view,if (!page_addr_list)return ERR_PTR (ret); +/* Account for UV plane with NV12. */ +if (rot_info->pixel_format ==DRM_FORMAT_NV12 ) + size_pages_uv = rot_info->size_uv >>PAGE_SHIFT ; +else + size_pages_uv =0 ; +/* Allocate target SG list. */ st =kmalloc (sizeof (*st),GFP_KERNEL );if (!st) goto err_st_alloc; - ret =sg_alloc_table (st, size_pages,GFP_KERNEL ); + ret =sg_alloc_table (st, size_pages + size_pages_uv,GFP_KERNEL );if (ret) goto err_sg_alloc;@@ -3301,15 +3310,30 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view, }/* Rotate the pages. */ -rotate_pages (page_addr_list,0 , + sg =rotate_pages (page_addr_list,0 , rot_info->width_pages, rot_info->height_pages, st,NULL ); +/* Append the UV plane if NV12. */ +if (rot_info->pixel_format ==DRM_FORMAT_NV12 ) { + uv_start_page = size_pages; + +/* Check for tile-row un-alignment. */ +if (offset_in_page (rot_info->uv_offset)) + uv_start_page--; + +rotate_pages (page_addr_list, uv_start_page, + rot_info->width_pages_uv, + rot_info->height_pages_uv, + st, sg); + } +DRM_DEBUG_KMS ( -"Created rotated page mapping for object size %zu (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages).\n" , +"Created rotated page mapping for object size %zu (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages (%u plane 0)).\n" , obj->base.size, rot_info->pitch, rot_info->height, rot_info->pixel_format, rot_info->width_pages, - rot_info->height_pages, size_pages); + rot_info->height_pages, size_pages + size_pages_uv, + size_pages);drm_free_large (page_addr_list);@@ -3321,10 +3345,11 @@ err_st_alloc:drm_free_large (page_addr_list);DRM_DEBUG_KMS ( -"Failed to create rotated mapping for object size %zu! (%d) (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages)\n" , +"Failed to create rotated mapping for object size %zu! (%d) (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages (%u plane 0))\n" , obj->base.size, ret, rot_info->pitch, rot_info->height, rot_info->pixel_format, rot_info->width_pages, - rot_info->height_pages, size_pages); + rot_info->height_pages, size_pages + size_pages_uv, + size_pages);return ERR_PTR (ret); }drivers/gpu/drm/i915/i915_gem_gtt.h +3
-0@@ -138,10 +138,13 @@ enum i915_ggtt_view_type {struct intel_rotation_info {unsigned int height;unsigned int pitch; +unsigned int uv_offset;uint32_t pixel_format;uint64_t fb_modifier;unsigned int width_pages, height_pages;uint64_t size; +unsigned int width_pages_uv, height_pages_uv; +uint64_t size_uv; };struct i915_ggtt_view {drivers/gpu/drm/i915/intel_display.c +0
-0drivers/gpu/drm/i915/intel_display.c intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb, · line 2266
Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c +1
-0@@ -2263,6 +2263,7 @@ intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb, info->height = fb->height; info->pixel_format = fb->pixel_format; info->pitch = fb->pitches[0 ]; + info->uv_offset = fb->offsets[1 ];OK, so this already came up a bit when I was looking at Chandra's stuff, but we really have to define what fb->offsets[] means now.
On one hand, it would be very logical for it to be a raw byte offset into the object where the fb starts. But on the other hand that perhaps makes it a bit more difficult for userspace to compute offsets[1] for the CbCr plane. Also we have fences to consider, and currently we even require that the fence stride matches the fb stride, even though that may not really be necessary. So maybe it should be the linear offset instead.
Quoted 1 line
So which way should we go?
Quoted 7 lines
No idea, I'm afraid I don't have the wide enough knowledge on this one to contribute hugely.
Why would it be difficult for userspace to compute a byte offset to the UV plane though? Presumably it had to know it already to have rendered anything - otherwise why and how would it be giving this frame buffer to the kernel?
Well, it's not difficult per say, but it would have to know the tile dimensions to do it. When using a linear offset, the tile dimensions are mostly meaningless, although some of the hw restrictions (stride must be tile aligned, and CbCr plane must start at somewhat aligned offset at least sometimes) does blow a hole to that theory a bit.
Quoted 5 lines
Quoted 2 lines
I suppose it's not really a huge deal which way we go, we just have to pick one and stick with it, and document it.
Hm I kinda assumed that for tiled layouts plane offsets must be tile-aligned for everyone.
Nah, we should be able to have it just (macro)pixel aligned. I have it as stride aligned in my tile_size branch just because I didn't want to think about the extra x offset initially. But I suppose the extra x offset shouldn't really cause any issues. I also didn't (yet) properly deal with the fact that the rotated view wouldn't necessarily cover the entire object.
Quoted 8 lines
Since tiling is now a separate part with the fb
modifiers I'd go with using it as the linear offset. But definitely needs to be documented with a kerneldoc pathc somewhere ...
-DanielSignature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 4/4 drm/i915: Enable querying offset of UV plane with intel_plane_obj_offset
In reply to Tvrtko UrsulinFrom: Tvrtko Ursulin <[email protected]>
v2: Rebase.
--- drivers/gpu/drm/i915/i915_gem_gtt.c | 2 ++ drivers/gpu/drm/i915/i915_gem_gtt.h | 1 + drivers/gpu/drm/i915/intel_display.c | 26 +++++++++++++++++++++----- drivers/gpu/drm/i915/intel_drv.h | 4 +++- drivers/gpu/drm/i915/intel_sprite.c | 2 +- 5 files changed, 28 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/i915_gem_gtt.c +2 -0
@@ -3322,6 +3322,8 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view,if (offset_in_page (rot_info->uv_offset)) uv_start_page--; + rot_info->uv_start_page = uv_start_page; + rotate_pages(page_addr_list, uv_start_page, rot_info->width_pages_uv, rot_info->height_pages_uv,
drivers/gpu/drm/i915/i915_gem_gtt.h +1 -0
@@ -145,6 +145,7 @@ struct intel_rotation_info {uint64_t size;unsigned int width_pages_uv, height_pages_uv;uint64_t size_uv; +unsigned int uv_start_page; };struct i915_ggtt_view {
drivers/gpu/drm/i915/intel_display.c +21 -5
@@ -2891,14 +2891,29 @@ u32 intel_fb_stride_alignment(struct drm_device *dev, uint64_t fb_modifier, }unsigned long intel_plane_obj_offset (struct intel_plane *intel_plane, -struct drm_i915_gem_object *obj) +struct drm_i915_gem_object *obj, +unsigned int plane) {const struct i915_ggtt_view *view = &i915_ggtt_view_normal; +struct i915_vma *vma; +unsigned char *offset;if (intel_rotation_90_or_270 (intel_plane->base.state->rotation)) view = &i915_ggtt_view_rotated; -return i915_gem_obj_ggtt_offset_view (obj, view); + vma =i915_gem_obj_to_ggtt_view (obj, view); +if (WARN (!vma,"ggtt vma for display object not found! (view=%u)\n" , + view->type)) +return -1 ; + + offset = (unsigned char *)vma->node.start; + +if (plane ==1 ) { + offset += vma->ggtt_view.rotation_info.uv_start_page * +PAGE_SIZE ; + } + +return (unsigned long )offset; }static void skl_detach_scaler (struct intel_crtc *intel_crtc,int id)
@@ -3054,7 +3069,7 @@ static void skylake_update_primary_plane(struct drm_crtc *crtc, obj =intel_fb_obj (fb); stride_div =intel_fb_stride_alignment (dev, fb->modifier[0 ], fb->pixel_format); - surf_addr =intel_plane_obj_offset (to_intel_plane (plane), obj); + surf_addr =intel_plane_obj_offset (to_intel_plane (plane), obj,0 );/* * FIXME: intel_plane_state->src, dst aren't set when transitional
@@ -11414,8 +11429,9 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,if (ret) goto cleanup_pending; - work->gtt_offset =intel_plane_obj_offset (to_intel_plane (primary), obj) - + intel_crtc->dspaddr_offset; + work->gtt_offset =intel_plane_obj_offset (to_intel_plane (primary), + obj,0 ); + work->gtt_offset += intel_crtc->dspaddr_offset;if (mmio_flip) { ret = intel_queue_mmio_flip(dev, crtc, fb, obj, ring,
drivers/gpu/drm/i915/intel_drv.h +3 -1
@@ -1166,7 +1166,9 @@ int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);int skl_max_scale (struct intel_crtc *crtc,struct intel_crtc_state *crtc_state);unsigned long intel_plane_obj_offset (struct intel_plane *intel_plane, -struct drm_i915_gem_object *obj); +struct drm_i915_gem_object *obj, +unsigned int plane); +u32 skl_plane_ctl_format (uint32_t pixel_format);u32 skl_plane_ctl_tiling (uint64_t fb_modifier);u32 skl_plane_ctl_rotation (unsigned int rotation);
drivers/gpu/drm/i915/intel_sprite.c +1 -1
@@ -235,7 +235,7 @@ skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,else if (key->flags &I915_SET_COLORKEY_SOURCE ) plane_ctl |=PLANE_CTL_KEY_ENABLE_SOURCE ; - surf_addr =intel_plane_obj_offset (intel_plane, obj); + surf_addr =intel_plane_obj_offset (intel_plane, obj,0 );if (intel_rotation_90_or_270 (rotation)) {/* stride: Surface height in tiles */
Signature · 6 lines
2.5.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 4/4] drm/i915: Enable querying offset of UV plane with intel_plane_obj_offset
Quoted 6 lines · Tvrtko Ursulin
From: Tvrtko Ursulin <[email protected]>
v2: Rebase.
Signed-off-by Tvrtko Ursulin <[email protected]>
Quoted 145 lines
--- drivers/gpu/drm/i915/i915_gem_gtt.c | 2 ++ drivers/gpu/drm/i915/i915_gem_gtt.h | 1 + drivers/gpu/drm/i915/intel_display.c | 26 +++++++++++++++++++++----- drivers/gpu/drm/i915/intel_drv.h | 4 +++- drivers/gpu/drm/i915/intel_sprite.c | 2 +- 5 files changed, 28 insertions(+), 7 deletions(-)drivers/gpu/drm/i915/i915_gem_gtt.c +2
-0@@ -3322,6 +3322,8 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view, if (offset_in_page(rot_info->uv_offset)) uv_start_page--; + rot_info->uv_start_page = uv_start_page; + rotate_pages(page_addr_list, uv_start_page, rot_info->width_pages_uv,drivers/gpu/drm/i915/i915_gem_gtt.c +0
-0rot_info->height_pages_uv,drivers/gpu/drm/i915/i915_gem_gtt.h +1
-0@@ -145,6 +145,7 @@ struct intel_rotation_info {uint64_t size;unsigned int width_pages_uv, height_pages_uv;uint64_t size_uv; +unsigned int uv_start_page; };struct i915_ggtt_view {drivers/gpu/drm/i915/intel_display.c +6
-3@@ -2891,14 +2891,29 @@ u32 intel_fb_stride_alignment(struct drm_device *dev, uint64_t fb_modifier, } unsigned long intel_plane_obj_offset(struct intel_plane *intel_plane, - struct drm_i915_gem_object *obj) + struct drm_i915_gem_object *obj, + unsigned int plane) { const struct i915_ggtt_view *view = &i915_ggtt_view_normal; +struct i915_vma *vma; +unsigned char *offset; if (intel_rotation_90_or_270(intel_plane->base.state ->rotation)) view = &i915_ggtt_view_rotated; -return i915_gem_obj_ggtt_offset_view (obj, view); + vma = i915_gem_obj_to_ggtt_view(obj, view); + if (WARN(!vma, "ggtt vma for display object not found!(view=%u)\n",
drivers/gpu/drm/i915/intel_display.c +7
-0+ view->type)) +return -1 ; + + offset = (unsigned char *)vma->node.start; + +if (plane ==1 ) { + offset += vma->ggtt_view.rotation_info.uv_start_page*
drivers/gpu/drm/i915/intel_display.c +5
-1+PAGE_SIZE ; + } + +return (unsigned long )offset; }static void skl_detach_scaler (struct intel_crtc *intel_crtc,int id)@@ -3054,7 +3069,7 @@ static void skylake_update_primary_plane(structdrm_crtc *crtc, obj =intel_fb_obj (fb); stride_div =intel_fb_stride_alignment (dev, fb->modifier[0 ], fb->pixel_format); - surf_addr =intel_plane_obj_offset (to_intel_plane (plane), obj); + surf_addr =intel_plane_obj_offset (to_intel_plane (plane), obj,0 );drivers/gpu/drm/i915/intel_display.c +0
-0/* * FIXME: intel_plane_state->src, dst aren't set when transitional
drivers/gpu/drm/i915/intel_display.c +1
-3@@ -11414,8 +11429,9 @@ static int intel_crtc_page_flip(structdrm_crtc *crtc, if (ret) goto cleanup_pending; - work->gtt_offset =intel_plane_obj_offset (to_intel_plane (primary ),obj ) - + intel_crtc ->dspaddr_offset; + work->gtt_offset =intel_plane_obj_offset(to_intel_plane(primary),
drivers/gpu/drm/i915/intel_display.c +2
-0+ obj, 0); + work->gtt_offset += intel_crtc->dspaddr_offset;if (mmio_flip) { ret = intel_queue_mmio_flip(dev, crtc, fb, obj,ring,
drivers/gpu/drm/i915/intel_drv.h +0
-1@@ -1166,7 +1166,9 @@ int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);int skl_max_scale (struct intel_crtc *crtc,struct intel_crtc_state *crtc_state); unsigned long intel_plane_obj_offset(struct intel_plane *intel_plane, - struct drm_i915_gem_object*obj);
drivers/gpu/drm/i915/intel_drv.h +1
-0+struct drm_i915_gem_object *obj,
drivers/gpu/drm/i915/intel_drv.h +2
-0+ unsigned int plane); +u32 skl_plane_ctl_format (uint32_t pixel_format);u32 skl_plane_ctl_tiling (uint64_t fb_modifier);u32 skl_plane_ctl_rotation (unsigned int rotation);drivers/gpu/drm/i915/intel_sprite.c +1
-1@@ -235,7 +235,7 @@ skl_update_plane(struct drm_plane *drm_plane,struct drm_crtc *crtc, else if (key->flags & I915_SET_COLORKEY_SOURCE) plane_ctl |= PLANE_CTL_KEY_ENABLE_SOURCE; - surf_addr = intel_plane_obj_offset(intel_plane, obj); + surf_addr = intel_plane_obj_offset(intel_plane, obj, 0);if (intel_rotation_90_or_270 (rotation)) {
Quoted 1 line
/* stride: Surface height in tiles */
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 11 lines · Tvrtko Ursulin
From: Tvrtko Ursulin <[email protected]>
GTT page remapping logic for 90/270 rotation needs some extensions to support NV12 90/270 rotation work which is currently underway.
Main thing is really to support building of the rotated page mapping from two planes instead of one, and adding appropriate calculations for the half-height UV plane geometry.
Quoted 4 lines
Those are stored in the existing rotation info data associated with the rotated view and are also used to return the appropriate plane start address when queried from the display code.
BTW I started to hatch something to uswe intel_gen4_compute_page_offset() on SKL+, and also start to handle fb offsets[0] somehow. I didn't get too far yet, but I figured I'll post a reference here in case people are intersted in this sort of stuff:
git://github.com/vsyrjala/linux.git tile_size
Quoted 22 lines
Tvrtko Ursulin (4):
drm/i915: Support planar formats in tile height calculations drm/i915: Support appending to the rotated pages mapping drm/i915: Support NV12 in rotated GGTT mapping drm/i915: Enable querying offset of UV plane with
intel_plane_obj_offsetdrivers/gpu/drm/i915/i915_gem_gtt.c | 58 ++++++++++++++++++++++++++++-------- drivers/gpu/drm/i915/i915_gem_gtt.h | 4 +++ drivers/gpu/drm/i915/intel_display.c | 48 ++++++++++++++++++++++------- drivers/gpu/drm/i915/intel_drv.h | 6 ++-- drivers/gpu/drm/i915/intel_sprite.c | 4 +-- 5 files changed, 93 insertions(+), 27 deletions(-)Signature · 6 lines
2.5.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx