Staging: rtl8712: Coding style warnings fix for block comments
PATCH 1/1 Staging: rtl8712: Coding style warnings fix for block comments
This patch is to the hal_init.c that fixes up following warning reported by checkpatch.pl :
-Block comments use * subsequent lines -Block comments use a trailing */ on a separate line
Signed-off-by Punit Vara <[email protected]>
--- drivers/staging/rtl8712/hal_init.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-)
drivers/staging/rtl8712/hal_init.c +16 -8
@@ -296,8 +296,10 @@ static u8 rtl8712_dl_fw(struct _adapter *padapter) goto exit_fail; tmp8 =r8712_read8 (padapter,0x1025000A ); -if (tmp8 &BIT (4 ))/* When boot from EEPROM, -& FW need more time to read EEPROM */ +if (tmp8 &BIT (4 ))/* +* When boot from EEPROM, +* & FW need more time to read EEPROM +*/ i =60 ;else /* boot from EFUSE */ i =30 ;
@@ -330,8 +332,10 @@ uint rtl8712_hal_init(struct _adapter *padapter)netdev_info (padapter->pnetdev,"1 RCR=0x%x\n" ,r8712_read32 (padapter,RCR )); val32 =r8712_read32 (padapter,RCR ); -r8712_write32 (padapter,RCR , (val32 |BIT (26 )));/* Enable RX TCP -Checksum offload */ +r8712_write32 (padapter,RCR , (val32 |BIT (26 )));/* +* Enable RX TCP +* Checksum offload +*/ netdev_info (padapter->pnetdev,"2 RCR=0x%x\n" ,r8712_read32 (padapter,RCR )); val32 =r8712_read32 (padapter,RCR );
@@ -344,8 +348,10 @@ uint rtl8712_hal_init(struct _adapter *padapter) BIT(0)); /* page = 128bytes */r8712_write8 (padapter,0x102500BD ,r8712_read8 (padapter,0x102500BD ) |BIT (7 ));/* enable usb rx aggregation */ -r8712_write8 (padapter,0x102500D9 ,1 );/* TH=1 => means that invalidate -* usb rx aggregation */ +r8712_write8 (padapter,0x102500D9 ,1 );/* +* TH=1 => means that invalidate +* usb rx aggregation +*/ r8712_write8 (padapter,0x1025FE5B ,0x04 );/* 1.7ms/4 */ /* Fix the RX FIFO issue(USB error) */ r8712_write8(padapter, 0x1025fe5C, r8712_read8(padapter, 0x1025fe5C)
@@ -365,8 +371,10 @@ uint rtl8712_hal_deinit(struct _adapter *padapter)r8712_write8 (padapter,SYS_CLKR +1 ,0x38 );/* Switch Control Path */ r8712_write8 (padapter,SYS_FUNC_EN +1 ,0x70 );r8712_write8 (padapter,PMC_FSM ,0x06 );/* Enable Loader Data Keep */ -r8712_write8 (padapter,SYS_ISO_CTRL ,0xF9 );/* Isolation signals from -* CORE, PLL */ +r8712_write8 (padapter,SYS_ISO_CTRL ,0xF9 );/* +* Isolation signals from +* CORE, PLL +*/ r8712_write8 (padapter,SYS_ISO_CTRL +1 ,0xe8 );/* Enable EFUSE 1.2V */ r8712_write8 (padapter,AFE_PLL_CTRL ,0x00 );/* Disable AFE PLL. */ r8712_write8 (padapter,LDOA15_CTRL ,0x54 );/* Disable A15V */
Signature · 1 line
2.5.2