MIPS: ath79: add gpio support
Subsystems (3)
cover MIPS: ath79: add gpio support
Antony Pavlov (6):
MIPS: ath79: use gpiolib
gpio: add ath79-gpio driver for Atheros MIPS SoCs
MIPS: dts: ar9331.dtsi: add gpio
MIPS: dts: tplink-mr3020.dts: move aliases up
MIPS: dts: tplink-mr3020.dts: enable gpio & leds
MIPS: tplink-mr3020_defconfig: enable gpio & leds
arch/mips/Kconfig | 1 + arch/mips/configs/tplink-mr3020_defconfig | 38 +++--- arch/mips/dts/ar9331.dtsi | 10 ++ arch/mips/dts/tplink-mr3020.dts | 43 ++++++- arch/mips/mach-ath79/include/mach/ar71xx_regs.h | 17 +++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-ath79.c | 156 ++++++++++++++++++++++++ 7 files changed, 244 insertions(+), 22 deletions(-) create mode 100644 drivers/gpio/gpio-ath79.c
Signature · 7 lines
2.5.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH 1/6 MIPS: ath79: use gpiolib
Signed-off-by Antony Pavlov <[email protected]>
--- arch/mips/Kconfig | 1 + 1 file changed, 1 insertion(+)
arch/mips/Kconfig +1 -0
@@ -68,6 +68,7 @@ config MACH_MIPS_ATH79 select COMMON_CLK_OF_PROVIDER select CLKDEV_LOOKUP select OFTREE + select GPIOLIB config MACH_MIPS_BCM47XX bool "Broadcom BCM47xx-based boards"
Signature · 7 lines
2.5.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH 2/6 gpio: add ath79-gpio driver for Atheros MIPS SoCs
In reply to Antony PavlovThis driver is based on linux-4.2 driver.
Signed-off-by Antony Pavlov <[email protected]>
--- arch/mips/mach-ath79/include/mach/ar71xx_regs.h | 17 +++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-ath79.c | 156 ++++++++++++++++++++++++ 3 files changed, 174 insertions(+)
arch/mips/mach-ath79/include/mach/ar71xx_regs.h +17 -0
@@ -23,6 +23,8 @@#define AR71XX_APB_BASE 0x18000000 +#define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000) +#define AR71XX_GPIO_SIZE 0x100#define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000)#define AR71XX_PLL_SIZE 0x100#define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
@@ -32,6 +34,21 @@#define AR933X_UART_SIZE 0x14/* +* GPIO block +*/ +#define AR71XX_GPIO_REG_OE 0x00 +#define AR71XX_GPIO_REG_IN 0x04 +#define AR71XX_GPIO_REG_OUT 0x08 +#define AR71XX_GPIO_REG_SET 0x0c +#define AR71XX_GPIO_REG_CLEAR 0x10 +#define AR71XX_GPIO_REG_INT_MODE 0x14 +#define AR71XX_GPIO_REG_INT_TYPE 0x18 +#define AR71XX_GPIO_REG_INT_POLARITY 0x1c +#define AR71XX_GPIO_REG_INT_PENDING 0x20 +#define AR71XX_GPIO_REG_INT_ENABLE 0x24 +#define AR71XX_GPIO_REG_FUNC 0x28 + +/* * PLL block */ #define AR933X_PLL_CPU_CONFIG_REG 0x00
drivers/gpio/Makefile +1 -0
@@ -1,6 +1,7 @@ obj-$(CONFIG_GPIOLIB) += gpiolib.o obj-$(CONFIG_GPIO_74164) += gpio-74164.o +obj-$(CONFIG_MACH_MIPS_ATH79) += gpio-ath79.o obj-$(CONFIG_GPIO_BCM2835) += gpio-bcm2835.o obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
drivers/gpio/gpio-ath79.c new file +156 -0
156 lines not on this page · raw message
Signature · 7 lines
2.5.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH 3/6 MIPS: dts: ar9331.dtsi: add gpio
In reply to Antony PavlovSigned-off-by Antony Pavlov <[email protected]>
--- arch/mips/dts/ar9331.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/mips/dts/ar9331.dtsi +10 -0
@@ -17,6 +17,16 @@ status = "disabled"; }; + gpio: gpio@18040000 { + compatible = "qca,ar7100-gpio"; + gpio-controller; + reg = <0x18040000 0x100>; + #gpio-cells = <2>; + + ngpios = <30>; + status = "disabled"; + }; + ar9331_clk: clock { compatible = "qca,ar933x-clk"; reg = <0x18050000 0x48>;
Signature · 7 lines
2.5.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH 4/6 MIPS: dts: tplink-mr3020.dts: move aliases up
In reply to Antony PavlovSigned-off-by Antony Pavlov <[email protected]>
--- arch/mips/dts/tplink-mr3020.dts | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-)
arch/mips/dts/tplink-mr3020.dts +4 -6
@@ -9,6 +9,10 @@ memory { reg = <0x00000000 0x2000000>; }; + + aliases { + spiflash = &spiflash; + }; }; &serial0 {
@@ -28,9 +32,3 @@ reg = <0>; }; }; - -/ { - aliases { - spiflash = &spiflash; - }; -};
Signature · 7 lines
2.5.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH 5/6 MIPS: dts: tplink-mr3020.dts: enable gpio & leds
In reply to Antony PavlovSigned-off-by Antony Pavlov <[email protected]>
--- arch/mips/dts/tplink-mr3020.dts | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)
arch/mips/dts/tplink-mr3020.dts +33 -0
@@ -1,6 +1,7 @@ /dts-v1/; #include "ar9331.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "TP-LINK MR3020";
@@ -13,12 +14,44 @@ aliases { spiflash = &spiflash; }; + + leds { + compatible = "gpio-leds"; + + wlan { + label = "tp-link:green:wlan"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + lan { + label = "tp-link:green:lan"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + wps { + label = "tp-link:green:wps"; + gpios = <&gpio 26 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led3g { + label = "tp-link:green:3g"; + gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; }; &serial0 { status = "okay"; }; +&gpio { + status = "okay"; +}; + &spi { num-chipselects = <1>; status = "okay";
Signature · 7 lines
2.5.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH 6/6 MIPS: tplink-mr3020_defconfig: enable gpio & leds
In reply to Antony PavlovSigned-off-by Antony Pavlov <[email protected]>
--- arch/mips/configs/tplink-mr3020_defconfig | 38 ++++++++++++++++++------------- 1 file changed, 22 insertions(+), 16 deletions(-)
arch/mips/configs/tplink-mr3020_defconfig +22 -16
@@ -1,34 +1,40 @@ CONFIG_BUILTIN_DTB=y CONFIG_BUILTIN_DTB_NAME="tplink-mr3020" CONFIG_MACH_MIPS_ATH79=y -CONFIG_LONGHELP=y CONFIG_CMDLINE_EDITING=y CONFIG_AUTO_COMPLETE=y -CONFIG_CMD_EDIT=y -CONFIG_CMD_SLEEP=y -CONFIG_CMD_LET=y -CONFIG_CMD_GLOBAL=y +CONFIG_LONGHELP=y +CONFIG_CMD_IOMEM=y +CONFIG_CMD_MEMINFO=y +# CONFIG_CMD_BOOTM is not set +CONFIG_CMD_GO=y CONFIG_CMD_LOADB=y CONFIG_CMD_LOADY=y -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_IOMEM=y -CONFIG_CMD_MM=y +CONFIG_CMD_RESET=y +CONFIG_CMD_GLOBAL=y CONFIG_CMD_SHA1SUM=y +CONFIG_CMD_LET=y +CONFIG_CMD_SLEEP=y +CONFIG_CMD_EDIT=y +CONFIG_CMD_MM=y +CONFIG_CMD_CLK=y CONFIG_CMD_FLASH=y -# CONFIG_CMD_BOOTM is not set -CONFIG_CMD_RESET=y -CONFIG_CMD_GO=y -CONFIG_CMD_OFTREE=y -CONFIG_CMD_OF_PROPERTY=y -CONFIG_CMD_OF_NODE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_LED=y CONFIG_CMD_SPI=y -CONFIG_CMD_CLK=y +CONFIG_CMD_LED_TRIGGER=y +CONFIG_CMD_OF_NODE=y +CONFIG_CMD_OF_PROPERTY=y +CONFIG_CMD_OFTREE=y CONFIG_OFDEVICE=y CONFIG_DRIVER_SERIAL_AR933X=y CONFIG_DRIVER_SPI_ATH79=y CONFIG_MTD=y # CONFIG_MTD_OOB_DEVICE is not set CONFIG_MTD_M25P80=y -CONFIG_MD5=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_LED_GPIO_OF=y +CONFIG_LED_TRIGGERS=y CONFIG_DIGEST_SHA224_GENERIC=y CONFIG_DIGEST_SHA256_GENERIC=y
Signature · 7 lines
2.5.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox