Skip to contentSkip to conversation

ARM: dts: sun4i: Enable USB DRC on the Marsboard A10

PATCH New Aleksei Mamlin 2 participants 2 messages Sep 24, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: sun4i: Enable USB DRC on the Marsboard A10

Enable the otg/drc usb controller on the Marsboard A10. Similar to Cubieboard, the 5V of the otg is directly connected to the general 5V, so we only use the id pin.

---
 arch/arm/boot/dts/sun4i-a10-marsboard.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
arch/arm/boot/dts/sun4i-a10-marsboard.dts +19 -0
index 02158bc..9a012db 100644
@@ -154,6 +154,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	led_pins_marsboard: led_pins at 0 {
 		allwinner,pins = "PB5", "PB6", "PB7", "PB8";
@@ -161,6 +165,13 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin at 0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
 };
 
 &reg_usb1_vbus {
@@ -184,7 +195,15 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
Signature · 1 line
2.4.9
#1 lore raw

PATCH 1/1 ARM: dts: sun4i: Enable USB DRC on the Marsboard A10

Hi,

Quoted 5 lines · Aleksei Mamlin

Enable the otg/drc usb controller on the Marsboard A10. Similar to Cubieboard, the 5V of the otg is directly connected to the general 5V, so we only use the id pin.

Thanks patch looks good to me:

Regards,

Hans

Quoted 50 lines
---
  arch/arm/boot/dts/sun4i-a10-marsboard.dts | 19 +++++++++++++++++++
  1 file changed, 19 insertions(+)
arch/arm/boot/dts/sun4i-a10-marsboard.dts +19 -0
index 02158bc..9a012db 100644
@@ -154,6 +154,10 @@
  	status = "okay";
  };
 
+&otg_sram {
+	status = "okay";
+};
+
  &pio {
  	led_pins_marsboard: led_pins at 0 {
  		allwinner,pins = "PB5", "PB6", "PB7", "PB8";
@@ -161,6 +165,13 @@
  		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
  		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
  	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin at 0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
  };
 
  &reg_usb1_vbus {
@@ -184,7 +195,15 @@
  	status = "okay";
  };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
  &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
  	usb1_vbus-supply = <&reg_usb1_vbus>;
  	usb2_vbus-supply = <&reg_usb2_vbus>;
  	status = "okay";