Add support for Intel chipsets
PATCH 1/1 Add support for Intel chipsets
M. Jay(Jayakumar, Muthurajan<[email protected]>) and I discussed and decided to include support for I217/I218 chipsets since these chipsets are found everywhere f.e. on laptops, low-end servers and we found it useful and helpful for testing simple functionality. Hence we decided to send this patch to be included in the mainline.
Ravi Kerur (1):
Add support for I217 and I218 Intel 1G chipsets.
drivers/net/e1000/base/e1000_api.c | 1 + drivers/net/e1000/base/e1000_hw.h | 1 + drivers/net/e1000/base/e1000_ich8lan.c | 30 +++++++----------------- drivers/net/e1000/base/e1000_osdep.h | 24 +++++++++++++++---- drivers/net/e1000/em_ethdev.c | 31 ++++++++++++++++++++++++- lib/librte_eal/common/include/rte_pci_dev_ids.h | 6 +++++ 6 files changed, 65 insertions(+), 28 deletions(-)
Signature · 1 line
1.9.1
PATCH 1/1 Add support for I217 and I218 Intel 1G chipsets.
This patch adds I217 and I218 Intel chipsets.
Compiled for:
Quoted 4 lines
i686-native-linuxapp-gcc
x86_64-native-linuxapp-clang
x86_64-native-linuxapp-gcc
x86_x32-native-linuxapp-gcc
Tested on:
Quoted 1 line
x86_64Ubuntu 14.04 with Intel I218-V and I217-LM chipsets.
--- drivers/net/e1000/base/e1000_api.c | 1 + drivers/net/e1000/base/e1000_hw.h | 1 + drivers/net/e1000/base/e1000_ich8lan.c | 30 +++++++----------------- drivers/net/e1000/base/e1000_osdep.h | 24 +++++++++++++++---- drivers/net/e1000/em_ethdev.c | 31 ++++++++++++++++++++++++- lib/librte_eal/common/include/rte_pci_dev_ids.h | 6 +++++ 6 files changed, 65 insertions(+), 28 deletions(-)
drivers/net/e1000/base/e1000_api.c +1 -0
@@ -292,6 +292,7 @@ s32 e1000_set_mac_type(struct e1000_hw *hw)case E1000_DEV_ID_PCH_LPT_I217_V :case E1000_DEV_ID_PCH_LPTLP_I218_LM :case E1000_DEV_ID_PCH_LPTLP_I218_V : +case E1000_DEV_ID_PCH_LPTLP_I218_V2 : mac->type = e1000_pch_lpt;break ;case E1000_DEV_ID_82575EB_COPPER :
drivers/net/e1000/base/e1000_hw.h +1 -0
@@ -132,6 +132,7 @@ struct e1000_hw;#define E1000_DEV_ID_PCH_LPT_I217_V 0x153B#define E1000_DEV_ID_PCH_LPTLP_I218_LM 0x155A#define E1000_DEV_ID_PCH_LPTLP_I218_V 0x1559 +#define E1000_DEV_ID_PCH_LPTLP_I218_V2 0x15A1#define E1000_DEV_ID_82576 0x10C9#define E1000_DEV_ID_82576_FIBER 0x10E6#define E1000_DEV_ID_82576_SERDES 0x10E7
drivers/net/e1000/base/e1000_ich8lan.c +8 -22
@@ -1386,29 +1386,15 @@ STATIC s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)if (!mac->get_link_status)return E1000_SUCCESS ; -if ((hw->mac.type < e1000_pch_lpt) || - (hw->device_id ==E1000_DEV_ID_PCH_LPT_I217_LM ) || - (hw->device_id ==E1000_DEV_ID_PCH_LPT_I217_V )) { -/* First we want to see if the MII Status Register reports -* link. If so, then we want to get the current speed/duplex -* of the PHY. -*/ - ret_val =e1000_phy_has_link_generic (hw,1 ,0 , &link); -if (ret_val) -return ret_val; - }else { -/* Check the MAC's STATUS register to determine link state -* since the PHY could be inaccessible while in ULP mode. -*/ - link = !!(E1000_READ_REG (hw,E1000_STATUS ) &E1000_STATUS_LU ); -if (link) - ret_val =e1000_disable_ulp_lpt_lp (hw, false); -else - ret_val =e1000_enable_ulp_lpt_lp (hw, false); +/* First we want to see if the MII Status Register reports +* link. If so, then we want to get the current speed/duplex +* of the PHY. +*/ + ret_val =e1000_phy_has_link_generic (hw,PHY_FORCE_LIMIT ,100000 , &link); +if (ret_val) +return ret_val; -if (ret_val) -return ret_val; - } +DEBUGOUT1 ("After phy_has_link_generic link state is %d\n" , link);if (hw->mac.type == e1000_pchlan) { ret_val =e1000_k1_gig_workaround_hv (hw, link);
drivers/net/e1000/base/e1000_osdep.h +19 -5
@@ -96,13 +96,22 @@ typedef int bool;#define E1000_PCI_REG (reg) (*((volatile uint32_t *)(reg))) +#define E1000_PCI_REG16 (reg) (*((volatile uint16_t *)(reg))) +#define E1000_PCI_REG_WRITE (reg, value) do { \ E1000_PCI_REG((reg)) = (rte_cpu_to_le_32(value)); \ } while (0) +#define E1000_PCI_REG_WRITE16 (reg, value) do { \ + E1000_PCI_REG16((reg)) = (value); \ +} while (0) +#define E1000_PCI_REG_ADDR (hw, reg) \ ((volatile uint32_t *)((char *)(hw)->hw_addr + (reg))) +#define E1000_PCI_REG_FLASH_ADDR (hw, reg) \ + ((volatile uint32_t *)((char *)(hw)->flash_address + (reg))) +#define E1000_PCI_REG_ARRAY_ADDR (hw, reg, index) \ E1000_PCI_REG_ADDR((hw), (reg) + ((index) << 2))
@@ -111,6 +120,11 @@ static inline uint32_t e1000_read_addr(volatile void* addr)return rte_le_to_cpu_32 (E1000_PCI_REG (addr)); } +static inline uint16_t e1000_read_addr16 (volatile void * addr) +{ +return rte_le_to_cpu_16 (E1000_PCI_REG16 (addr)); +} +/* Necessary defines */ #define E1000_MRQC_ENABLE_MASK 0x00000007#define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000
@@ -156,20 +170,20 @@ static inline uint32_t e1000_read_addr(volatile void* addr)E1000_WRITE_REG (hw, reg, value)/* -* Not implemented. +* Tested on I217/I218 chipset. */#define E1000_READ_FLASH_REG (hw, reg) \ - (E1000_ACCESS_PANIC(E1000_READ_FLASH_REG, hw, reg, 0), 0) + e1000_read_addr(E1000_PCI_REG_FLASH_ADDR((hw), (reg)))#define E1000_READ_FLASH_REG16 (hw, reg) \ - (E1000_ACCESS_PANIC(E1000_READ_FLASH_REG16, hw, reg, 0), 0) + e1000_read_addr16(E1000_PCI_REG_FLASH_ADDR((hw), (reg)))#define E1000_WRITE_FLASH_REG (hw, reg, value) \ - E1000_ACCESS_PANIC(E1000_WRITE_FLASH_REG, hw, reg, value) + E1000_PCI_REG_WRITE(E1000_PCI_REG_FLASH_ADDR((hw), (reg)), (value))#define E1000_WRITE_FLASH_REG16 (hw, reg, value) \ - E1000_ACCESS_PANIC(E1000_WRITE_FLASH_REG16, hw, reg, value) + E1000_PCI_REG_WRITE16(E1000_PCI_REG_FLASH_ADDR((hw), (reg)), (value))#define STATIC static
drivers/net/e1000/em_ethdev.c +30 -1
@@ -220,6 +220,28 @@ rte_em_dev_atomic_write_link_status(struct rte_eth_dev *dev,return 0 ; } +/** +* eth_em_dev_is_ich8 - Check for ICH8 device +* @hw: pointer to the HW structure +* +* return TRUE for ICH8, otherwise FALSE +**/ +static bool +eth_em_dev_is_ich8 (struct e1000_hw *hw) +{ +DEBUGFUNC ("eth_em_dev_is_ich8" ); +switch (hw->device_id) { +case E1000_DEV_ID_PCH_LPT_I217_LM : +case E1000_DEV_ID_PCH_LPT_I217_V : +case E1000_DEV_ID_PCH_LPTLP_I218_LM : +case E1000_DEV_ID_PCH_LPTLP_I218_V : +case E1000_DEV_ID_PCH_LPTLP_I218_V2 : +return 1 ; +default : +return 0 ; + } +} +static int eth_em_dev_init (struct rte_eth_dev *eth_dev) {
@@ -251,6 +273,8 @@ eth_em_dev_init(struct rte_eth_dev *eth_dev) adapter->stopped =0 ;/* For ICH8 support we'll need to map the flash memory BAR */ +if (eth_em_dev_is_ich8 (hw)) + hw->flash_address = (void *)pci_dev->mem_resource[1 ].addr;if (e1000_setup_init_funcs (hw, TRUE) !=E1000_SUCCESS ||em_hw_init (hw) !=0 ) {
@@ -476,6 +500,7 @@ em_set_pba(struct e1000_hw *hw)break ;case e1000_pchlan:case e1000_pch2lan: +case e1000_pch_lpt: pba =E1000_PBA_26K ;break ;default :
@@ -724,7 +749,8 @@ em_hardware_init(struct e1000_hw *hw) hw->fc.requested_mode = e1000_fc_none;/* Workaround: no TX flow ctrl for PCH */ -if (hw->mac.type == e1000_pchlan) +if (hw->mac.type == e1000_pchlan || + hw->mac.type == e1000_pch_lpt) hw->fc.requested_mode = e1000_fc_rx_pause;/* Override - settings for PCH2LAN, ya its magic :) */
@@ -733,6 +759,8 @@ em_hardware_init(struct e1000_hw *hw) hw->fc.low_water =0x5048 ; hw->fc.pause_time =0x0650 ; hw->fc.refresh_time =0x0400 ; + }else if (hw->mac.type == e1000_pch_lpt) { + hw->fc.requested_mode = e1000_fc_full; } diag =e1000_init_hw (hw);
@@ -891,6 +919,7 @@ em_get_max_pktlen(const struct e1000_hw *hw)case e1000_ich9lan:case e1000_ich10lan:case e1000_pch2lan: +case e1000_pch_lpt:case e1000_82574:case e1000_80003es2lan:/* 9K Jumbo Frame size */ case e1000_82583:
lib/librte_eal/common/include/rte_pci_dev_ids.h +6 -0
@@ -272,6 +272,7 @@#define E1000_DEV_ID_PCH_LPT_I217_V 0x153B#define E1000_DEV_ID_PCH_LPTLP_I218_LM 0x155A#define E1000_DEV_ID_PCH_LPTLP_I218_V 0x1559 +#define E1000_DEV_ID_PCH_LPTLP_I218_V2 0x15A1/* * Tested (supported) on VM emulated HW.
@@ -305,6 +306,11 @@ RTE_PCI_DEV_ID_DECL_EM(PCI_VENDOR_ID_INTEL, E1000_DEV_ID_82573L) RTE_PCI_DEV_ID_DECL_EM(PCI_VENDOR_ID_INTEL, E1000_DEV_ID_82574L) RTE_PCI_DEV_ID_DECL_EM(PCI_VENDOR_ID_INTEL, E1000_DEV_ID_82574LA) RTE_PCI_DEV_ID_DECL_EM(PCI_VENDOR_ID_INTEL, E1000_DEV_ID_82583V) +RTE_PCI_DEV_ID_DECL_EM(PCI_VENDOR_ID_INTEL, E1000_DEV_ID_PCH_LPT_I217_LM) +RTE_PCI_DEV_ID_DECL_EM(PCI_VENDOR_ID_INTEL, E1000_DEV_ID_PCH_LPT_I217_V) +RTE_PCI_DEV_ID_DECL_EM(PCI_VENDOR_ID_INTEL, E1000_DEV_ID_PCH_LPTLP_I218_LM) +RTE_PCI_DEV_ID_DECL_EM(PCI_VENDOR_ID_INTEL, E1000_DEV_ID_PCH_LPTLP_I218_V) +RTE_PCI_DEV_ID_DECL_EM (PCI_VENDOR_ID_INTEL ,E1000_DEV_ID_PCH_LPTLP_I218_V2 )/******************** Physical IGB devices from e1000_hw.h ********************/
Signature · 1 line
1.9.1
Re: [PATCH v1] Add support for I217 and I218 Intel 1G chipsets.
Thank you Ravi.
This has great utility.
With all the latest laptop having this NIC in the chipset, the portability makes DPDK development on laptops very useful. We have seen cases where with this patch, DPDK development and demonstration was very portable and beneficial for developers.
Kindly requesting to acknowledge
Thanks,
M Jay
-----Original Message-----
From: Ravi Kerur [mailto:[email protected]]
Sent: Thursday, September 24, 2015 3:15 PM
To: [email protected]
Cc: Jayakumar, Muthurajan; Ravi Kerur
Subject: [PATCH v1] Add support for I217 and I218 Intel 1G chipsets.
This patch adds I217 and I218 Intel chipsets.
Compiled for:
Quoted 4 lines
i686-native-linuxapp-gcc
x86_64-native-linuxapp-clang
x86_64-native-linuxapp-gcc
x86_x32-native-linuxapp-gcc
Tested on:
Quoted 1 line
x86_64Ubuntu 14.04 with Intel I218-V and I217-LM chipsets.
--- drivers/net/e1000/base/e1000_api.c | 1 + drivers/net/e1000/base/e1000_hw.h | 1 + drivers/net/e1000/base/e1000_ich8lan.c | 30 +++++++----------------- drivers/net/e1000/base/e1000_osdep.h | 24 +++++++++++++++---- drivers/net/e1000/em_ethdev.c | 31 ++++++++++++++++++++++++- lib/librte_eal/common/include/rte_pci_dev_ids.h | 6 +++++ 6 files changed, 65 insertions(+), 28 deletions(-)
drivers/net/e1000/base/e1000_api.c +1 -0
@@ -292,6 +292,7 @@ s32 e1000_set_mac_type(struct e1000_hw *hw)case E1000_DEV_ID_PCH_LPT_I217_V :case E1000_DEV_ID_PCH_LPTLP_I218_LM :case E1000_DEV_ID_PCH_LPTLP_I218_V : +case E1000_DEV_ID_PCH_LPTLP_I218_V2 : mac->type = e1000_pch_lpt;break ;case E1000_DEV_ID_82575EB_COPPER :
drivers/net/e1000/base/e1000_hw.h +1 -0
@@ -132,6 +132,7 @@ struct e1000_hw;#define E1000_DEV_ID_PCH_LPT_I217_V 0x153B#define E1000_DEV_ID_PCH_LPTLP_I218_LM 0x155A#define E1000_DEV_ID_PCH_LPTLP_I218_V 0x1559 +#define E1000_DEV_ID_PCH_LPTLP_I218_V2 0x15A1#define E1000_DEV_ID_82576 0x10C9#define E1000_DEV_ID_82576_FIBER 0x10E6#define E1000_DEV_ID_82576_SERDES 0x10E7
drivers/net/e1000/base/e1000_ich8lan.c +8 -22
@@ -1386,29 +1386,15 @@ STATIC s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)if (!mac->get_link_status)return E1000_SUCCESS ; -if ((hw->mac.type < e1000_pch_lpt) || - (hw->device_id ==E1000_DEV_ID_PCH_LPT_I217_LM ) || - (hw->device_id ==E1000_DEV_ID_PCH_LPT_I217_V )) { -/* First we want to see if the MII Status Register reports -* link. If so, then we want to get the current speed/duplex -* of the PHY. -*/ - ret_val =e1000_phy_has_link_generic (hw,1 ,0 , &link); -if (ret_val) -return ret_val; - }else { -/* Check the MAC's STATUS register to determine link state -* since the PHY could be inaccessible while in ULP mode. -*/ - link = !!(E1000_READ_REG (hw,E1000_STATUS ) &E1000_STATUS_LU ); -if (link) - ret_val =e1000_disable_ulp_lpt_lp (hw, false); -else - ret_val =e1000_enable_ulp_lpt_lp (hw, false); +/* First we want to see if the MII Status Register reports +* link. If so, then we want to get the current speed/duplex +* of the PHY. +*/ + ret_val =e1000_phy_has_link_generic (hw,PHY_FORCE_LIMIT ,100000 , &link); +if (ret_val) +return ret_val; -if (ret_val) -return ret_val; - } +DEBUGOUT1 ("After phy_has_link_generic link state is %d\n" , link);if (hw->mac.type == e1000_pchlan) { ret_val = e1000_k1_gig_workaround_hv(hw, link); diff --git a/drivers/net/e1000/base/e1000_osdep.h b/drivers/net/e1000/base/e1000_osdep.h
index d04ec73..3255d37 100644
drivers/net/e1000/base/e1000_osdep.h +18 -5
@@ -96,13 +96,22 @@ typedef int bool;#define E1000_PCI_REG (reg) (*((volatile uint32_t *)(reg))) +#define E1000_PCI_REG16 (reg) (*((volatile uint16_t *)(reg))) +#define E1000_PCI_REG_WRITE (reg, value) do { \ E1000_PCI_REG((reg)) = (rte_cpu_to_le_32(value)); \ } while (0) +#define E1000_PCI_REG_WRITE16 (reg, value) do { \ + E1000_PCI_REG16((reg)) = (value); \ +} while (0) +#define E1000_PCI_REG_ADDR (hw, reg) \ ((volatile uint32_t *)((char *)(hw)->hw_addr + (reg))) +#define E1000_PCI_REG_FLASH_ADDR (hw, reg) \ + ((volatile uint32_t *)((char *)(hw)->flash_address + (reg))) +#define E1000_PCI_REG_ARRAY_ADDR (hw, reg, index) \ E1000_PCI_REG_ADDR((hw), (reg) + ((index) << 2))
@@ -111,6 +120,11 @@ static inline uint32_t e1000_read_addr(volatile void* addr)return rte_le_to_cpu_32 (E1000_PCI_REG (addr)); } +static inline uint16_t e1000_read_addr16 (volatile void * addr) { +return rte_le_to_cpu_16 (E1000_PCI_REG16 (addr)); +} +/* Necessary defines */ #define E1000_MRQC_ENABLE_MASK 0x00000007#define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000
@@ -156,20 +170,20 @@ static inline uint32_t e1000_read_addr(volatile void* addr)E1000_WRITE_REG (hw, reg, value)/* -* Not implemented. +* Tested on I217/I218 chipset. */#define E1000_READ_FLASH_REG (hw, reg) \ - (E1000_ACCESS_PANIC(E1000_READ_FLASH_REG, hw, reg, 0), 0) + e1000_read_addr(E1000_PCI_REG_FLASH_ADDR((hw), (reg)))#define E1000_READ_FLASH_REG16 (hw, reg) \ - (E1000_ACCESS_PANIC(E1000_READ_FLASH_REG16, hw, reg, 0), 0) + e1000_read_addr16(E1000_PCI_REG_FLASH_ADDR((hw), (reg)))#define E1000_WRITE_FLASH_REG (hw, reg, value) \ - E1000_ACCESS_PANIC(E1000_WRITE_FLASH_REG, hw, reg, value) + E1000_PCI_REG_WRITE(E1000_PCI_REG_FLASH_ADDR((hw), (reg)), (value))#define E1000_WRITE_FLASH_REG16 (hw, reg, value) \ - E1000_ACCESS_PANIC(E1000_WRITE_FLASH_REG16, hw, reg, value) + E1000_PCI_REG_WRITE16(E1000_PCI_REG_FLASH_ADDR((hw), (reg)), (value))#define STATIC static
drivers/net/e1000/em_ethdev.c +19 -0
@@ -220,6 +220,28 @@ rte_em_dev_atomic_write_link_status(struct rte_eth_dev *dev,return 0 ; } +/** +* eth_em_dev_is_ich8 - Check for ICH8 device +* @hw: pointer to the HW structure +* +* return TRUE for ICH8, otherwise FALSE **/ static bool +eth_em_dev_is_ich8 (struct e1000_hw *hw) { +DEBUGFUNC ("eth_em_dev_is_ich8" ); +switch (hw->device_id) { +case E1000_DEV_ID_PCH_LPT_I217_LM : +case E1000_DEV_ID_PCH_LPT_I217_V : +case E1000_DEV_ID_PCH_LPTLP_I218_LM : +case E1000_DEV_ID_PCH_LPTLP_I218_V : +case E1000_DEV_ID_PCH_LPTLP_I218_V2 : +return 1 ; +default : +return 0 ; + } +} +static int eth_em_dev_init(struct rte_eth_dev *eth_dev) { @@ -251,6 +273,8 @@ eth_em_dev_init(struct rte_eth_dev *eth_dev) adapter->stopped =0 ;
/* For ICH8 support we'll need to map the flash memory BAR */
+ if (eth_em_dev_is_ich8(hw))
+ hw->flash_address = (void *)pci_dev->mem_resource[1].addr;
if (e1000_setup_init_funcs(hw, TRUE) != E1000_SUCCESS ||
em_hw_init(hw) != 0) {
@@ -476,6 +500,7 @@ em_set_pba(struct e1000_hw *hw)
break;
case e1000_pchlan:
case e1000_pch2lan:
+ case e1000_pch_lpt:
pba = E1000_PBA_26K;
break;
default:
@@ -724,7 +749,8 @@ em_hardware_init(struct e1000_hw *hw)
hw->fc.requested_mode = e1000_fc_none;
/* Workaround: no TX flow ctrl for PCH */
- if (hw->mac.type == e1000_pchlan)
+ if (hw->mac.type == e1000_pchlan ||
+ hw->mac.type == e1000_pch_lpt)
hw->fc.requested_mode = e1000_fc_rx_pause;
/* Override - settings for PCH2LAN, ya its magic :) */ @@ -733,6 +759,8 @@ em_hardware_init(struct e1000_hw *hw)
hw->fc.low_water = 0x5048;
hw->fc.pause_time = 0x0650;
hw->fc.refresh_time = 0x0400;
+ } else if (hw->mac.type == e1000_pch_lpt) {
+ hw->fc.requested_mode = e1000_fc_full;
}
diag = e1000_init_hw(hw);
@@ -891,6 +919,7 @@ em_get_max_pktlen(const struct e1000_hw *hw)
case e1000_ich9lan:
case e1000_ich10lan:
case e1000_pch2lan:
+ case e1000_pch_lpt:
case e1000_82574:
case e1000_80003es2lan: /* 9K Jumbo Frame size */ case e1000_82583:
lib/librte_eal/common/include/rte_pci_dev_ids.h +11 -0
@@ -272,6 +272,7 @@#define E1000_DEV_ID_PCH_LPT_I217_V 0x153B#define E1000_DEV_ID_PCH_LPTLP_I218_LM 0x155A#define E1000_DEV_ID_PCH_LPTLP_I218_V 0x1559 +#define E1000_DEV_ID_PCH_LPTLP_I218_V2 0x15A1/* * Tested (supported) on VM emulated HW.
@@ -305,6 +306,11 @@ RTE_PCI_DEV_ID_DECL_EM(PCI_VENDOR_ID_INTEL, E1000_DEV_ID_82573L) RTE_PCI_DEV_ID_DECL_EM(PCI_VENDOR_ID_INTEL, E1000_DEV_ID_82574L) RTE_PCI_DEV_ID_DECL_EM(PCI_VENDOR_ID_INTEL, E1000_DEV_ID_82574LA) RTE_PCI_DEV_ID_DECL_EM(PCI_VENDOR_ID_INTEL, E1000_DEV_ID_82583V) +RTE_PCI_DEV_ID_DECL_EM (PCI_VENDOR_ID_INTEL , +E1000_DEV_ID_PCH_LPT_I217_LM) +RTE_PCI_DEV_ID_DECL_EM (PCI_VENDOR_ID_INTEL , +E1000_DEV_ID_PCH_LPT_I217_V) +RTE_PCI_DEV_ID_DECL_EM (PCI_VENDOR_ID_INTEL , +E1000_DEV_ID_PCH_LPTLP_I218_LM) +RTE_PCI_DEV_ID_DECL_EM (PCI_VENDOR_ID_INTEL , +E1000_DEV_ID_PCH_LPTLP_I218_V) +RTE_PCI_DEV_ID_DECL_EM (PCI_VENDOR_ID_INTEL , +E1000_DEV_ID_PCH_LPTLP_I218_V2 )
/******************** Physical IGB devices from e1000_hw.h ********************/
--
1.9.1
2015-09-24 15:13, Ravi Kerur:
Quoted 2 lines
M.
Jay(Jayakumar, Muthurajan<[email protected]>)and I discussed and decided to include support for I217/I218 chipsets
[...]
Quoted 4 lines
drivers/net/e1000/base/e1000_api.c | 1 + drivers/net/e1000/base/e1000_hw.h | 1 + drivers/net/e1000/base/e1000_ich8lan.c | 30 +++++++----------------- drivers/net/e1000/base/e1000_osdep.h | 24 +++++++++++++++----
You are modifying the base driver which is only allowed by Intel. But there can be exceptions. Wenzhuo, is it an exception?
Hi all,
Quoted 10 lines
-----Original Message-----
From: Thomas Monjalon [mailto:[email protected]]
Sent: Friday, September 25, 2015 3:08 PM
To: Ravi Kerur
Cc: [email protected]; Lu, Wenzhuo
Subject: Re: [dpdk-dev] [PATCH v1] Add support for Intel chipsets2015-09-24 15:13, Ravi Kerur:
Quoted 2 lines
M.
Jay(Jayakumar, Muthurajan<[email protected]>)and I discussed and decided to include support for I217/I218 chipsets
Quoted 8 lines
[...]
Quoted 4 lines
drivers/net/e1000/base/e1000_api.c | 1 + drivers/net/e1000/base/e1000_hw.h | 1 + drivers/net/e1000/base/e1000_ich8lan.c | 30 +++++++----------------- drivers/net/e1000/base/e1000_osdep.h | 24 +++++++++++++++----You are modifying the base driver which is only allowed by Intel. But there can be exceptions. Wenzhuo, is it an exception?
I'm afraid it's not an exception. We plan to update e1000 base code recently. Hope it will help. Thanks.
Quoted 18 lines · Wenzhuo
Hi all,
Quoted 7 lines
-----Original Message-----
From: Thomas Monjalon [mailto:[email protected]]
Sent: Friday, September 25, 2015 3:08 PM
To: Ravi Kerur
Cc: [email protected]; Lu, Wenzhuo
Subject: Re: [dpdk-dev] [PATCH v1] Add support for Intel chipsetsQuoted 7 lines
2015-09-24 15:13, Ravi Kerur:
Quoted 2 lines
M.
Jay(Jayakumar, Muthurajan<[email protected]>)and I discussed and decided to include support for I217/I218 chipsets[...]
Quoted 3 lines
drivers/net/e1000/base/e1000_api.c | 1 + drivers/net/e1000/base/e1000_hw.h | 1 + drivers/net/e1000/base/e1000_ich8lan.c | 30+++++++-----------------
Quoted 1 line
Quoted 1 line
drivers/net/e1000/base/e1000_osdep.h | 24
Quoted 9 lines
+++++++++++++++----
Quoted 2 lines
You are modifying the base driver which is only allowed by Intel. But
there can
Quoted 1 line
be exceptions. Wenzhuo, is it an exception?
I'm afraid it's not an exception. We plan to update e1000 base code recently. Hope it will help.
Thanks.
Ok thanks was not aware of it. Can you let me know what version of e1000/e1000e you plan to update just to make sure it has support for these.
Thanks,
Ravi
Hi Ravi,
From: Ravi Kerur [mailto:[email protected]]
Sent: Saturday, September 26, 2015 5:14 AM
To: Lu, Wenzhuo
Cc: Thomas Monjalon; [email protected]
Subject: Re: [dpdk-dev] [PATCH v1] Add support for Intel chipsets
On Fri, Sep 25, 2015 at 1:04 AM, Lu, Wenzhuo <[email protected]<mailto:[email protected]>> wrote:
Hi all,
Quoted 10 lines
-----Original Message-----
From: Thomas Monjalon [mailto:[email protected]<mailto:[email protected]>]
Sent: Friday, September 25, 2015 3:08 PM
To: Ravi Kerur
Cc: [email protected]<mailto:[email protected]>; Lu, Wenzhuo
Subject: Re: [dpdk-dev] [PATCH v1] Add support for Intel chipsets2015-09-24 15:13, Ravi Kerur:
Quoted 2 lines
M.
Jay(Jayakumar, Muthurajan<[email protected]<mailto:[email protected]>>)and I discussed and decided to include support for I217/I218 chipsets
Quoted 8 lines
[...]
Quoted 4 lines
drivers/net/e1000/base/e1000_api.c | 1 + drivers/net/e1000/base/e1000_hw.h | 1 + drivers/net/e1000/base/e1000_ich8lan.c | 30 +++++++----------------- drivers/net/e1000/base/e1000_osdep.h | 24 +++++++++++++++----You are modifying the base driver which is only allowed by Intel. But there can be exceptions. Wenzhuo, is it an exception?
I'm afraid it's not an exception. We plan to update e1000 base code recently. Hope it will help. Thanks.
Quoted 1 line
Ok thanks was not aware of it. Can you let me know what version of e1000/e1000e you plan to update just to make sure it has support for these.
The planned version is R2.2. Hope we can finish it in time☺
Quoted 2 lines
Thanks,
Ravi