Skip to contentSkip to conversation

ARM: dts: move aliases back to .dts in Cygnus

PATCH Applied Ray Jui 2 participants 2 messages Sep 24, 2015 – Sep 25, 2015

Subsystems (2)
lore
Share & tools
lore

Ray Jui

author maintainer
#0 lore raw

PATCH 1/1 ARM: dts: move aliases back to .dts in Cygnus

Move aliases from bcm-cygnus.dtsi back to individual .dts files. Also clean up the chosen node to have the stdout-path using the proper alias

---
 arch/arm/boot/dts/bcm-cygnus.dtsi | 4 ----
 arch/arm/boot/dts/bcm911360k.dts  | 7 +++++--
 arch/arm/boot/dts/bcm958300k.dts  | 7 +++++--
 arch/arm/boot/dts/bcm958305k.dts  | 7 +++++--
 4 files changed, 15 insertions(+), 10 deletions(-)
arch/arm/boot/dts/bcm-cygnus.dtsi +0 -4
index b5f9f34..2778533 100644
@@ -41,10 +41,6 @@
 	model = "Broadcom Cygnus SoC";
 	interrupt-parent = <&gic>;
 
-	aliases {
-		serial0 = &uart3;
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
arch/arm/boot/dts/bcm911360k.dts +5 -2
index 814011c..091c73a 100644
@@ -38,9 +38,12 @@
 	model = "Cygnus SVK (BCM911360K)";
 	compatible = "brcm,bcm11360", "brcm,cygnus";
 
+	aliases {
+		serial0 = &uart3;
+	};
+
 	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
 };
 
arch/arm/boot/dts/bcm958300k.dts +5 -2
index 2e31581..b4a1392 100644
@@ -39,9 +39,12 @@
 	model = "Cygnus SVK (BCM958300K)";
 	compatible = "brcm,bcm58300", "brcm,cygnus";
 
+	aliases {
+		serial0 = &uart3;
+	};
+
 	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
 };
 
arch/arm/boot/dts/bcm958305k.dts +5 -2
index 288a637..3378683 100644
@@ -39,9 +39,12 @@
 	model = "Cygnus Wireless Audio (BCM958305K)";
 	compatible = "brcm,bcm58305", "brcm,cygnus";
 
+	aliases {
+		serial0 = &uart3;
+	};
+
 	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
 };
 
Signature · 1 line
1.9.1
#1 lore raw
Quoted 4 lines · Ray Jui

Move aliases from bcm-cygnus.dtsi back to individual .dts files. Also clean up the chosen node to have the stdout-path using the proper alias

Applied to devicetree/next, thanks!

Signature · 1 line
Florian