CHROMIUM: drm: bridge/dw_hdmi: Eliminate unused cable_plugin
Subsystems (3)
PATCH 1/1 CHROMIUM: drm: bridge/dw_hdmi: Eliminate unused cable_plugin
There's a member in 'struct dw_hdmi' called cable_plugin. It's never set to anything anywhere so thus is always false. There's a bit of code checking it, but since it's always false this must be dead code. Eliminate it.
Note: if someone wants to figure out the intention of the original code and implement whatever feature / fix was needed then we can drop this patch. The 'cable_plugin' member has been unused since the code was first added in (9aaf880 imx-drm: Add mx6 hdmi transmitter support).
--- drivers/gpu/drm/bridge/dw_hdmi.c | 9 --------- 1 file changed, 9 deletions(-)
drivers/gpu/drm/bridge/dw_hdmi.c +0 -9
@@ -115,7 +115,6 @@ struct dw_hdmi {int vic;u8 edid[HDMI_EDID_LEN ]; -bool cable_plugin;bool phy_enabled;struct drm_display_mode previous_mode;
@@ -1203,12 +1202,6 @@ static void dw_hdmi_clear_overflow(struct dw_hdmi *hdmi)hdmi_writeb (hdmi, val,HDMI_FC_INVIDCONF ); } -static void hdmi_enable_overflow_interrupts (struct dw_hdmi *hdmi) -{ -hdmi_writeb (hdmi,0 ,HDMI_FC_MASK2 ); -hdmi_writeb (hdmi,0 ,HDMI_IH_MUTE_FC_STAT2 ); -} -static void hdmi_disable_overflow_interrupts (struct dw_hdmi *hdmi) { hdmi_writeb(hdmi, HDMI_IH_MUTE_FC_STAT2_OVERFLOW_MASK,
@@ -1285,8 +1278,6 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)hdmi_tx_hdcp_config (hdmi);dw_hdmi_clear_overflow (hdmi); -if (hdmi->cable_plugin && hdmi->sink_is_hdmi) -hdmi_enable_overflow_interrupts (hdmi);return 0 ; }
Signature · 6 lines
2.6.0.rc0.131.gf624c3d _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 10 lines · Douglas Anderson
There's a member in 'struct
dw_hdmi' calledcable_plugin. It's never set to anything anywhere so thus is always false. There's a bit of code checking it, but since it's always false this must be dead code. Eliminate it.Note: if someone wants to figure out the intention of the original code and implement whatever feature / fix was needed then we can drop this patch. The '
cable_plugin' member has been unused since the code was first added in (9aaf880 imx-drm: Add mx6 hdmi transmitter support).
Quoted 4 lines
Signed-off-by Douglas Anderson <[email protected]>--- drivers/gpu/drm/bridge/dw_hdmi.c | 9 --------- 1 file changed, 9 deletions(-)
Except for the CHROMIUM: prefix this looks good to me:
Russell, do you have patches to this driver queued for v4.4 and plan to pick this up into your tree or should I take it?
Thierry
Quoted 38 lines
drivers/gpu/drm/bridge/dw_hdmi.c +0
-9@@ -115,7 +115,6 @@ struct dw_hdmi {int vic;u8 edid[HDMI_EDID_LEN ]; -bool cable_plugin;bool phy_enabled;struct drm_display_mode previous_mode;@@ -1203,12 +1202,6 @@ static void dw_hdmi_clear_overflow(struct dw_hdmi *hdmi)hdmi_writeb (hdmi, val,HDMI_FC_INVIDCONF ); } -static void hdmi_enable_overflow_interrupts (struct dw_hdmi *hdmi) -{ -hdmi_writeb (hdmi,0 ,HDMI_FC_MASK2 ); -hdmi_writeb (hdmi,0 ,HDMI_IH_MUTE_FC_STAT2 ); -} -static void hdmi_disable_overflow_interrupts (struct dw_hdmi *hdmi) { hdmi_writeb(hdmi, HDMI_IH_MUTE_FC_STAT2_OVERFLOW_MASK,@@ -1285,8 +1278,6 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)hdmi_tx_hdcp_config (hdmi);dw_hdmi_clear_overflow (hdmi); -if (hdmi->cable_plugin && hdmi->sink_is_hdmi) -hdmi_enable_overflow_interrupts (hdmi);return 0 ; }Signature · 1 line
2.6.0.rc0.131.gf624c3d
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 16 lines · Thierry Reding
Quoted 10 lines · Douglas Anderson
There's a member in 'struct
dw_hdmi' calledcable_plugin. It's never set to anything anywhere so thus is always false. There's a bit of code checking it, but since it's always false this must be dead code. Eliminate it.Note: if someone wants to figure out the intention of the original code and implement whatever feature / fix was needed then we can drop this patch. The '
cable_plugin' member has been unused since the code was first added in (9aaf880 imx-drm: Add mx6 hdmi transmitter support).Quoted 4 lines
Signed-off-by Douglas Anderson <[email protected]>--- drivers/gpu/drm/bridge/dw_hdmi.c | 9 --------- 1 file changed, 9 deletions(-)
Quoted 6 lines
Except for the CHROMIUM: prefix this looks good to me:
Reviewed-by Thierry Reding <[email protected]>Russell, do you have patches to this driver queued for v4.4 and plan to pick this up into your tree or should I take it?
My current patch stack for imx-drm related stuff looks like this at present:
drm: bridge/dw_hdmi: place PHY into low power mode when disabled
drm: bridge/dw_hdmi: start of support for pixel doubled modes
drm: bridge/dw_hdmi: remove CEC engine register definitions
drm: bridge/dw_hdmi-cec: add Designware HDMI CEC driver
cec: add HDMI CEC input driver
cec: add HDMI CEC core driver
drm: bridge/dw_hdmi: replace CTS calculation for the ACR
drm: bridge/dw_hdmi: remove ratio support from ACR code
drm: bridge/dw_hdmi: adjust pixel clock values in N calculation
drm: bridge/dw_hdmi: avoid being recursive in N calculation
drm: bridge/dw_hdmi-ahb-audio: allow larger buffer sizes
drm: bridge/dw_hdmi-ahb-audio: basic support for multi-channel PCM audio
drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver
drm: bridge/dw_hdmi-ahb-audio: add audio driver
drm: bridge/dw_hdmi: improve HDMI enable/disable handling
drm: bridge/dw_hdmi: add connector mode forcing
drm: bridge/dw_hdmi: add support for interlaced video modes
gpu: imx: fix support for interlaced modes
gpu: imx: simplify sync polarity setting
I haven't yet decided what, if anything, from that stack I'm going to try to get into the next merge window. Given the lack of interest last time I posted these patches, I'm loosing interest myself in trying to get them merged, especially ones which are getting on for being 2 years old.
Signature · 6 lines
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net. _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Am Montag, den 21.09.2015, 15:15 +0100 schrieb Russell King - ARM Linux:
Quoted 12 lines · Thierry Reding
Quoted 11 lines · Douglas Anderson
Quoted 10 lines
There's a member in 'struct
dw_hdmi' calledcable_plugin. It's never set to anything anywhere so thus is always false. There's a bit of code checking it, but since it's always false this must be dead code. Eliminate it.Note: if someone wants to figure out the intention of the original code and implement whatever feature / fix was needed then we can drop this patch. The '
cable_plugin' member has been unused since the code was first added in (9aaf880 imx-drm: Add mx6 hdmi transmitter support).
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
Signed-off-by Douglas Anderson <[email protected]>--- drivers/gpu/drm/bridge/dw_hdmi.c | 9 --------- 1 file changed, 9 deletions(-)Except for the CHROMIUM: prefix this looks good to me:
Reviewed-by Thierry Reding <[email protected]>
This seems to be similar to Sascha's "drm: bridge/dw_hdmi: remove unused code" patch, except that the hdmi_disable_overflow_interrupts function could be removed too.
Quoted 26 lines
Quoted 2 lines
Russell, do you have patches to this driver queued for v4.4 and plan to pick this up into your tree or should I take it?
My current patch stack for imx-drm related stuff looks like this at present:
drm: bridge/dw_hdmi: place PHY into low power mode when disabled
drm: bridge/dw_hdmi: start of support for pixel doubled modes
drm: bridge/dw_hdmi: remove CEC engine register definitions
drm: bridge/dw_hdmi-cec: add Designware HDMI CEC driver
cec: add HDMI CEC input driver
cec: add HDMI CEC core driver
drm: bridge/dw_hdmi: replace CTS calculation for the ACR
drm: bridge/dw_hdmi: remove ratio support from ACR code
drm: bridge/dw_hdmi: adjust pixel clock values in N calculation
drm: bridge/dw_hdmi: avoid being recursive in N calculation
drm: bridge/dw_hdmi-ahb-audio: allow larger buffer sizes
drm: bridge/dw_hdmi-ahb-audio: basic support for multi-channel PCM audio
drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver
drm: bridge/dw_hdmi-ahb-audio: add audio driver
drm: bridge/dw_hdmi: improve HDMI enable/disable handling
drm: bridge/dw_hdmi: add connector mode forcing
drm: bridge/dw_hdmi: add support for interlaced video modes
gpu: imx: fix support for interlaced modes
gpu: imx: simplify sync polarity setting
Quoted 5 lines
I haven't yet decided what, if anything, from that stack I'm going to try to get into the next merge window. Given the lack of interest last time I posted these patches, I'm loosing interest myself in trying to get them merged, especially ones which are getting on for being 2 years old.
I'm still very interested to see at least the "gpu: imx: fix support for interlaced modes" and "gpu: imx: simplify sync polarity setting" merged. May I take them into the imx-drm tree separately?
Or, if I can influence your decision in this matter, I'd prefer if you could once more resend last month's series with Thierry in Cc:, and he'd either queue them with my Ack for the imx-drm patches or give his Ack for you or me to queue them.
regards
Philipp
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 58 lines · Philipp Zabel
Am Montag, den 21.09.2015, 15:15 +0100 schrieb Russell King - ARM Linux:
Quoted 12 lines · Thierry Reding
Quoted 11 lines · Douglas Anderson
Quoted 10 lines
There's a member in 'struct
dw_hdmi' calledcable_plugin. It's never set to anything anywhere so thus is always false. There's a bit of code checking it, but since it's always false this must be dead code. Eliminate it.Note: if someone wants to figure out the intention of the original code and implement whatever feature / fix was needed then we can drop this patch. The '
cable_plugin' member has been unused since the code was first added in (9aaf880 imx-drm: Add mx6 hdmi transmitter support).Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
Signed-off-by Douglas Anderson <[email protected]>--- drivers/gpu/drm/bridge/dw_hdmi.c | 9 --------- 1 file changed, 9 deletions(-)Except for the CHROMIUM: prefix this looks good to me:
Reviewed-by Thierry Reding <[email protected]>This seems to be similar to Sascha's "drm: bridge/dw_hdmi: remove unused code" patch, except that the
hdmi_disable_overflow_interruptsfunction could be removed too.Quoted 26 lines
Quoted 2 lines
Russell, do you have patches to this driver queued for v4.4 and plan to pick this up into your tree or should I take it?
My current patch stack for imx-drm related stuff looks like this at present:
drm: bridge/dw_hdmi: place PHY into low power mode when disabled
drm: bridge/dw_hdmi: start of support for pixel doubled modes
drm: bridge/dw_hdmi: remove CEC engine register definitions
drm: bridge/dw_hdmi-cec: add Designware HDMI CEC driver
cec: add HDMI CEC input driver
cec: add HDMI CEC core driver
drm: bridge/dw_hdmi: replace CTS calculation for the ACR
drm: bridge/dw_hdmi: remove ratio support from ACR code
drm: bridge/dw_hdmi: adjust pixel clock values in N calculation
drm: bridge/dw_hdmi: avoid being recursive in N calculation
drm: bridge/dw_hdmi-ahb-audio: allow larger buffer sizes
drm: bridge/dw_hdmi-ahb-audio: basic support for multi-channel PCM audio
drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver
drm: bridge/dw_hdmi-ahb-audio: add audio driver
drm: bridge/dw_hdmi: improve HDMI enable/disable handling
drm: bridge/dw_hdmi: add connector mode forcing
drm: bridge/dw_hdmi: add support for interlaced video modes
gpu: imx: fix support for interlaced modes
gpu: imx: simplify sync polarity settingQuoted 5 lines
I haven't yet decided what, if anything, from that stack I'm going to try to get into the next merge window. Given the lack of interest last time I posted these patches, I'm loosing interest myself in trying to get them merged, especially ones which are getting on for being 2 years old.
Quoted 3 lines
I'm still very interested to see at least the "gpu: imx: fix support for interlaced modes" and "gpu: imx: simplify sync polarity setting" merged. May I take them into the imx-drm tree separately?
The "gpu: imx:" patches sound like they are standalone, so taking them through the imx-drm tree would be the easiest.
Thierry
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 59 lines · Thierry Reding
Quoted 58 lines · Philipp Zabel
Am Montag, den 21.09.2015, 15:15 +0100 schrieb Russell King - ARM Linux:
Quoted 12 lines · Thierry Reding
Quoted 11 lines · Douglas Anderson
Quoted 10 lines
There's a member in 'struct
dw_hdmi' calledcable_plugin. It's never set to anything anywhere so thus is always false. There's a bit of code checking it, but since it's always false this must be dead code. Eliminate it.Note: if someone wants to figure out the intention of the original code and implement whatever feature / fix was needed then we can drop this patch. The '
cable_plugin' member has been unused since the code was first added in (9aaf880 imx-drm: Add mx6 hdmi transmitter support).Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
Signed-off-by Douglas Anderson <[email protected]>--- drivers/gpu/drm/bridge/dw_hdmi.c | 9 --------- 1 file changed, 9 deletions(-)Except for the CHROMIUM: prefix this looks good to me:
Reviewed-by Thierry Reding <[email protected]>This seems to be similar to Sascha's "drm: bridge/dw_hdmi: remove unused code" patch, except that the
hdmi_disable_overflow_interruptsfunction could be removed too.Quoted 31 lines
Quoted 2 lines
Russell, do you have patches to this driver queued for v4.4 and plan to pick this up into your tree or should I take it?
My current patch stack for imx-drm related stuff looks like this at present:
drm: bridge/dw_hdmi: place PHY into low power mode when disabled
drm: bridge/dw_hdmi: start of support for pixel doubled modes
drm: bridge/dw_hdmi: remove CEC engine register definitions
drm: bridge/dw_hdmi-cec: add Designware HDMI CEC driver
cec: add HDMI CEC input driver
cec: add HDMI CEC core driver
drm: bridge/dw_hdmi: replace CTS calculation for the ACR
drm: bridge/dw_hdmi: remove ratio support from ACR code
drm: bridge/dw_hdmi: adjust pixel clock values in N calculation
drm: bridge/dw_hdmi: avoid being recursive in N calculation
drm: bridge/dw_hdmi-ahb-audio: allow larger buffer sizes
drm: bridge/dw_hdmi-ahb-audio: basic support for multi-channel PCM audio
drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver
drm: bridge/dw_hdmi-ahb-audio: add audio driver
drm: bridge/dw_hdmi: improve HDMI enable/disable handling
drm: bridge/dw_hdmi: add connector mode forcing
drm: bridge/dw_hdmi: add support for interlaced video modes
gpu: imx: fix support for interlaced modes
gpu: imx: simplify sync polarity settingI haven't yet decided what, if anything, from that stack I'm going to try to get into the next merge window. Given the lack of interest last time I posted these patches, I'm loosing interest myself in trying to get them merged, especially ones which are getting on for being 2 years old.
Quoted 6 lines
Quoted 3 lines
I'm still very interested to see at least the "gpu: imx: fix support for interlaced modes" and "gpu: imx: simplify sync polarity setting" merged. May I take them into the imx-drm tree separately?
The "gpu: imx:" patches sound like they are standalone, so taking them through the imx-drm tree would be the easiest.
Taking just those screws up the rest of the series, as I previously explained:
Quoted 11 lines · Philipp Zabel
Quoted 7 lines
Unfortunately these timings are completely different from what Freescale came up with for the TV Encoder on i.MX5, but the code we have currently in mainline doesn't work for that either. I suppose I'll follow up with a patch that adds yet another sync counter setup for the i.MX5/TVE case.
I'd like to take the two ipu-v3 patches, making a few small changes on this one:
Please don't split the series up. The reason it's a series is because there's interdependencies between the patches.
Have you acked my patch set sent in August, after I relied saying that the series needs to be kept together?
Philipp sent a tested-by, but that was about the only attributation I received from posting the set, so I only sent David what I was fully happy to send at the time. I'm willing to send:
drm: bridge/dw_hdmi: improve HDMI enable/disable handling
drm: bridge/dw_hdmi: add connector mode forcing
drm: bridge/dw_hdmi: add support for interlaced video modes
gpu: imx: fix support for interlaced modes
gpu: imx: simplify sync polarity setting
now, which are patches 3, 4, 5, 11 and 12 from the original 12 patch series.
The actual audio patches I think need to be held _even_ longer, because it's unclear what's happening with ALSA in regard to HDMI audio. There's also the need to sort out what's going on with CEC (thanks to the late arrival of the CEC project by Hans) which may influence how the HDMI audio part gets to hear about the display's capabilities. So, yet again I can see audio missing the next merge window, which is just how it's been for the last two years.
Actually, right now I think we ought to say: sod it, these patches have been around for long enough that they should just be merged, and then we'll sort out whatever changes are necessary later when the CEC and audio situation finally gets sorted... but are you happy with having what is essentially an ALSA driver in drivers/gpu/drm/bridge? If not, why haven't you responded to the many times that the patches have been posted?
At this stage, I'm getting to be very rebelious, and it's very tempting for me to say "sod you" or just drop the work entirely if you have any objections. I feel I've put fsck loads of work into this area for very little mainline progress, and I'm just not going to continue doing that.
Signature · 6 lines
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net. _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 23 lines · Russell King - ARM Linux
My current patch stack for imx-drm related stuff looks like this at present:
drm: bridge/dw_hdmi: place PHY into low power mode when disabled
drm: bridge/dw_hdmi: start of support for pixel doubled modes
drm: bridge/dw_hdmi: remove CEC engine register definitions
drm: bridge/dw_hdmi-cec: add Designware HDMI CEC driver
cec: add HDMI CEC input driver
cec: add HDMI CEC core driver
drm: bridge/dw_hdmi: replace CTS calculation for the ACR
drm: bridge/dw_hdmi: remove ratio support from ACR code
drm: bridge/dw_hdmi: adjust pixel clock values in N calculation
drm: bridge/dw_hdmi: avoid being recursive in N calculation
drm: bridge/dw_hdmi-ahb-audio: allow larger buffer sizes
drm: bridge/dw_hdmi-ahb-audio: basic support for multi-channel PCM audio
drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver
drm: bridge/dw_hdmi-ahb-audio: add audio driver
drm: bridge/dw_hdmi: improve HDMI enable/disable handling
drm: bridge/dw_hdmi: add connector mode forcing
drm: bridge/dw_hdmi: add support for interlaced video modes
gpu: imx: fix support for interlaced modes
gpu: imx: simplify sync polarity setting
Quoted 5 lines
I haven't yet decided what, if anything, from that stack I'm going to try to get into the next merge window. Given the lack of interest last time I posted these patches, I'm loosing interest myself in trying to get them merged, especially ones which are getting on for being 2 years old.
These are all good material. Please consider getting them merged.
Thanks
Quoted 26 lines · Fabio Estevam
Quoted 23 lines · Russell King - ARM Linux
My current patch stack for imx-drm related stuff looks like this at present:
drm: bridge/dw_hdmi: place PHY into low power mode when disabled
drm: bridge/dw_hdmi: start of support for pixel doubled modes
drm: bridge/dw_hdmi: remove CEC engine register definitions
drm: bridge/dw_hdmi-cec: add Designware HDMI CEC driver
cec: add HDMI CEC input driver
cec: add HDMI CEC core driver
drm: bridge/dw_hdmi: replace CTS calculation for the ACR
drm: bridge/dw_hdmi: remove ratio support from ACR code
drm: bridge/dw_hdmi: adjust pixel clock values in N calculation
drm: bridge/dw_hdmi: avoid being recursive in N calculation
drm: bridge/dw_hdmi-ahb-audio: allow larger buffer sizes
drm: bridge/dw_hdmi-ahb-audio: basic support for multi-channel PCM audio
drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver
drm: bridge/dw_hdmi-ahb-audio: add audio driver
drm: bridge/dw_hdmi: improve HDMI enable/disable handling
drm: bridge/dw_hdmi: add connector mode forcing
drm: bridge/dw_hdmi: add support for interlaced video modes
gpu: imx: fix support for interlaced modes
gpu: imx: simplify sync polarity setting
Quoted 7 lines
Quoted 5 lines
I haven't yet decided what, if anything, from that stack I'm going to try to get into the next merge window. Given the lack of interest last time I posted these patches, I'm loosing interest myself in trying to get them merged, especially ones which are getting on for being 2 years old.
These are all good material. Please consider getting them merged.
If you want to see them merged, how about sending me an Acked-by for these patches? You were copied on them in August, and there was a deathly silence from _everyone_ on the initial set of patches.
There's been a few changes to "gpu: imx: fix support for interlaced modes" and "drm: bridge/dw_hdmi-ahb-audio: add audio driver" as per the (little) review that was done in August, but other than that, the patches are essentially the same, just rebased on top of (now) -rc4.
Maybe some people can also take a look at the CTS/N changes, and maybe back me up against Doug Anderson, so I'm not feeling like I can't merge those patches due to the lack of concensus.
Signature · 2 lines
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net.
Quoted 33 lines · Russell King - ARM Linux
Quoted 32 lines · Fabio Estevam
Quoted 28 lines · Russell King - ARM Linux
My current patch stack for imx-drm related stuff looks like this at present:
drm: bridge/dw_hdmi: place PHY into low power mode when disabled
drm: bridge/dw_hdmi: start of support for pixel doubled modes
drm: bridge/dw_hdmi: remove CEC engine register definitions
drm: bridge/dw_hdmi-cec: add Designware HDMI CEC driver
cec: add HDMI CEC input driver
cec: add HDMI CEC core driver
drm: bridge/dw_hdmi: replace CTS calculation for the ACR
drm: bridge/dw_hdmi: remove ratio support from ACR code
drm: bridge/dw_hdmi: adjust pixel clock values in N calculation
drm: bridge/dw_hdmi: avoid being recursive in N calculation
drm: bridge/dw_hdmi-ahb-audio: allow larger buffer sizes
drm: bridge/dw_hdmi-ahb-audio: basic support for multi-channel PCM audio
drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver
drm: bridge/dw_hdmi-ahb-audio: add audio driver
drm: bridge/dw_hdmi: improve HDMI enable/disable handling
drm: bridge/dw_hdmi: add connector mode forcing
drm: bridge/dw_hdmi: add support for interlaced video modes
gpu: imx: fix support for interlaced modes
gpu: imx: simplify sync polarity settingI haven't yet decided what, if anything, from that stack I'm going to try to get into the next merge window. Given the lack of interest last time I posted these patches, I'm loosing interest myself in trying to get them merged, especially ones which are getting on for being 2 years old.
Quoted 5 lines
Quoted 1 line
These are all good material. Please consider getting them merged.
If you want to see them merged, how about sending me an Acked-by for these patches? You were copied on them in August, and there was a deathly silence from _everyone_ on the initial set of patches.
Sure, will go through each one the patches. Just give me one day or two.
Regards,
Fabio Estevam
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel