Patch "net: phy: fixed_phy: handle link-down case" has been added to the 4.2-stable tree

This is a note to let you know that I've just added the patch titled

net: phy: fixed_phy: handle link-down case

to the 4.2-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
net-phy-fixed_phy-handle-link-down-case.patch
and it can be found in the queue-4.2 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Stas Sergeev <[email protected]>
Date: Mon, 20 Jul 2015 17:49:56 -0700
Subject: net: phy: fixed_phy: handle link-down case

From: Stas Sergeev <[email protected]>

[ Upstream 868a4215be9a6d80548ccb74763b883dc99d32a2 in net-next tree,
will be pushed to Linus very soon. ]

fixed_phy_register() currently hardcodes the fixed PHY link to 1, and expects to find a "speed" parameter to provide correct information towards the fixed PHY consumer.

In a subsequent change, where we allow "managed" (e.g: (RS)GMII in-band status auto-negotiation) fixed PHYs, none of these parameters can be provided since they will be auto-negotiated, hence, we just provide a zero-initialized fixed_phy_status to fixed_phy_register() which makes it fail when we call fixed_phy_update_regs() since status.speed = 0 which makes us hit the "default" label and error out.

Without this change, we would also see potentially inconsistent speed/duplex parameters for fixed PHYs when the link is DOWN.

---
 drivers/net/phy/fixed_phy.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

@@ -52,6 +52,10 @@ static int fixed_phy_update_regs(struct
 	u16 lpagb = 0;
 	u16 lpa = 0;
 
+	if (!fp->status.link)
+		goto done;
+	bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE;
+
 	if (fp->status.duplex) {
 		bmcr |= BMCR_FULLDPLX;
 

@@ -96,15 +100,13 @@ static int fixed_phy_update_regs(struct
 		}
 	}
 
-	if (fp->status.link)
-		bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE;
-
 	if (fp->status.pause)
 		lpa |= LPA_PAUSE_CAP;
 
 	if (fp->status.asym_pause)
 		lpa |= LPA_PAUSE_ASYM;
 
+done:
 	fp->regs[MII_PHYSID1] = 0;
 	fp->regs[MII_PHYSID2] = 0;
 

Patches currently in stable-queue which might be from [email protected] are

queue-4.2/net-phy-fixed_phy-handle-link-down-case.patch queue-4.2/of_mdio-add-new-dt-property-managed-to-specify-the-phy-management-type.patch queue-4.2/mvneta-use-inband-status-only-when-explicitly-enabled.patch