openvswitch: Add support for 802.1ad
Subsystems (3)
v14 cover openvswitch: Add support for 802.1ad
Although the Open Flow specification specified support for 802.1AD (qinq) as well as push and pop vlan headers, So far Open vSwitch has only supported a single tag header. This patch implements 802.1AD in the kernel module.
This patch accompanies version 14 of the user level openvswitch patch submitted to openvswitch dev list.
V14: Add outer tpid to flow_key
V13: Fix incorrect encoding and decoding of netlink to/from key attributes.
V12: Fix some problems and issues pointed out by reviewers. When parsing netlink attributes Ether types other then 0x88a8 as outer tpid.
V11: Add inner tpid to flow key. Fix separate inner encap attribute when parsing netlink attributes. Merge 2 patches to consolidate qinq changes.
V10: Implement reviewer comments: Consolidate vlan parsing functions. Splits netlink parsing and flow conversion into a separate patch. Uses double encap attribute encapsulation for 802.1ad. Netlink attributes now look like this:
eth_type(0x88a8),vlan(vid=100),encap(eth_type(0x8100), vlan(vid=200),
encap(eth_type(0x0800), ...))The double encap atributes in this version of the patch is incompatible with old versions of the user level 802.1ad patch. A new user level patch which is also being submitted simultaneously to openvswitch dev mailing list.
V9: Includes changes suggested by reviewers
V8: Includes changes suggested by reviewers
V7: Includes changes suggested by reviewers
V6: Rebased to net-next
V5: Use encapsulated attributes
For discussion, history and previous versions of the kernel module patch and the user code patch see the OVS dev mailing list, openvswitch.org/pipermail/dev/..
Thomas F Herbert (3):
openvswitch: 802.1ad uapi changes.
Check for vlan ethernet types for 8021.q or 802.1ad 802.1AD: Flow handling, actions, vlan parsing and netlink attributes
include/linux/if_vlan.h | 17 ++++ include/uapi/linux/openvswitch.h | 17 ++-- net/openvswitch/actions.c | 4 +- net/openvswitch/flow.c | 87 ++++++++++++++++---- net/openvswitch/flow.h | 11 ++- net/openvswitch/flow_netlink.c | 167 +++++++++++++++++++++++++++++++++++---- net/openvswitch/vport-netdev.c | 4 +- 7 files changed, 265 insertions(+), 42 deletions(-)
Signature · 6 lines
2.4.3 _______________________________________________ dev mailing list [email protected] http://openvswitch.org/mailman/listinfo/dev
A message that is not in the archive (sent off-list or not yet received): 1443670380-4245-1-git-send-email-thomasfherbert-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
PATCH v14 3/3 openvswitch: 802.1ad: Flow handling, actions, vlan parsing and netlink attributes
Add support for 802.1ad including the ability to push and pop double tagged vlans. Add support for 802.1ad to netlink parsing and flow conversion. Uses double nested encap attributes to represent double tagged vlan. Inner TPID encoded along with ctci in nested attributes.
--- net/openvswitch/actions.c | 4 +- net/openvswitch/flow.c | 87 +++++++++++++++++---- net/openvswitch/flow.h | 11 ++- net/openvswitch/flow_netlink.c | 167 +++++++++++++++++++++++++++++++++++++---- net/openvswitch/vport-netdev.c | 4 +- 5 files changed, 239 insertions(+), 34 deletions(-)
net/openvswitch/actions.c +2 -2
@@ -236,7 +236,7 @@ static int pop_vlan(struct sk_buff *skb, struct sw_flow_key *key)if (skb_vlan_tag_present (skb))invalidate_flow_key (key);else - key->eth.tci =0 ; + key->eth.vlan.tci =0 ;return err; }
@@ -246,7 +246,7 @@ static int push_vlan(struct sk_buff *skb, struct sw_flow_key *key,if (skb_vlan_tag_present (skb))invalidate_flow_key (key);else - key->eth.tci = vlan->vlan_tci; + key->eth.vlan.tci = vlan->vlan_tci;return skb_vlan_push (skb, vlan->vlan_tpid,ntohs (vlan->vlan_tci) & ~VLAN_TAG_PRESENT ); }
net/openvswitch/flow.c +72 -15
105 lines not on this page · raw message
net/openvswitch/flow.h +10 -1
@@ -68,7 +68,16 @@ struct sw_flow_key {struct {u8 src[ETH_ALEN ];/* Ethernet source address. */ u8 dst[ETH_ALEN ];/* Ethernet destination address. */ -__be16 tci;/* 0 if no VLAN, VLAN_TAG_PRESENT set otherwise. */ +struct { +__be16 tpid;/* Outer Vlan type 802.1q or 802.1ad.*/ +__be16 tci;/* 0 if no VLAN, VLAN_TAG_PRESENT */ +/* set otherwise. */ + } vlan; +struct { +__be16 tpid;/* Inner Vlan DL_type 802.1q.*/ +__be16 tci;/* 0 if no CVLAN, VLAN_TAG_PRESENT */ +/* set otherwise. */ + } cvlan;__be16 type;/* Ethernet frame type. */ } eth;union {
net/openvswitch/flow_netlink.c +152 -15
257 lines not on this page · raw message
net/openvswitch/vport-netdev.c +3 -1
@@ -194,7 +194,9 @@ static unsigned int packet_length(const struct sk_buff *skb) {unsigned int length = skb->len -ETH_HLEN ; -if (skb->protocol ==htons (ETH_P_8021Q )) +if (eth_type_vlan (skb->protocol)) + length -=VLAN_HLEN ; +if (skb->protocol ==htons (ETH_P_8021AD )) length -=VLAN_HLEN ;return length;
Signature · 6 lines
2.4.3 _______________________________________________ dev mailing list [email protected] http://openvswitch.org/mailman/listinfo/dev
Re: [PATCH net-next V14 3/3] openvswitch: 802.1ad: Flow handling, actions, vlan parsing and netlink attributes
Quoted 283 lines · Thomas F Herbert
Add support for 802.1ad including the ability to push and pop double tagged vlans. Add support for 802.1ad to netlink parsing and flow conversion. Uses double nested encap attributes to represent double tagged vlan. Inner TPID encoded along with ctci in nested attributes.
Signed-off-by Thomas F Herbert <[email protected]>--- net/openvswitch/actions.c | 4 +- net/openvswitch/flow.c | 87 +++++++++++++++++---- net/openvswitch/flow.h | 11 ++- net/openvswitch/flow_netlink.c | 167 +++++++++++++++++++++++++++++++++++++---- net/openvswitch/vport-netdev.c | 4 +- 5 files changed, 239 insertions(+), 34 deletions(-)net/openvswitch/actions.c +2
-2@@ -236,7 +236,7 @@ static int pop_vlan(struct sk_buff *skb, struct sw_flow_key *key)if (skb_vlan_tag_present (skb))invalidate_flow_key (key);else - key->eth.tci =0 ; + key->eth.vlan.tci =0 ;return err; }@@ -246,7 +246,7 @@ static int push_vlan(struct sk_buff *skb, struct sw_flow_key *key,if (skb_vlan_tag_present (skb))invalidate_flow_key (key);else - key->eth.tci = vlan->vlan_tci; + key->eth.vlan.tci = vlan->vlan_tci;return skb_vlan_push (skb, vlan->vlan_tpid,ntohs (vlan->vlan_tci) & ~VLAN_TAG_PRESENT ); }net/openvswitch/flow.c +72
-15@@ -305,21 +305,78 @@ static bool icmp6hdr_ok(struct sk_buff *skb)static int parse_vlan (struct sk_buff *skb,struct sw_flow_key *key) {struct qtag_prefix { -__be16 eth_type;/* ETH_P_8021Q */ +__be16 eth_type;/* ETH_P_8021Q or ETH_P_8021AD */ __be16 tci; }; -struct qtag_prefix *qp; +struct qtag_prefix *qp = (struct qtag_prefix *)skb->data; -if (unlikely (skb->len <sizeof (struct qtag_prefix ) +sizeof (__be16))) +struct qinqtag_prefix { +__be16 eth_type;/* ETH_P_8021Q or ETH_P_8021AD */ +__be16 tci; +__be16 inner_tpid;/* ETH_P_8021Q */ +__be16 ctci; + }; + +if (likely (skb_vlan_tag_present (skb))) { + key->eth.vlan.tci =htons (skb->vlan_tci); + key->eth.vlan.tpid = skb->vlan_proto; + +/* Case where upstream +* processing has already stripped the outer vlan tag. +*/ +if (unlikely (skb->vlan_proto ==htons (ETH_P_8021AD ))) { +if (unlikely (skb->len <sizeof (struct qtag_prefix ) + +sizeof (__be16))) { + key->eth.vlan.tci =0 ; +return 0 ; + } + +if (unlikely (!pskb_may_pull (skb, +sizeof (struct qtag_prefix ) + +sizeof (__be16)))) +return -ENOMEM ; + + key->eth.cvlan.tci = + qp->tci |htons (VLAN_TAG_PRESENT ); + key->eth.cvlan.tpid = qp->eth_type; + +__skb_pull (skb,sizeof (struct qtag_prefix )); + }return 0 ; -if (unlikely (!pskb_may_pull (skb,sizeof (struct qtag_prefix ) + -sizeof (__be16)))) -return -ENOMEM ; + }else if (qp->eth_type ==htons (ETH_P_8021AD )) { +struct qinqtag_prefix *qinqp = + (struct qinqtag_prefix *)skb->data; + +if (unlikely (skb->len <sizeof (struct qinqtag_prefix ) + +sizeof (__be16))) +return 0 ; + +if (unlikely (!pskb_may_pull (skb,sizeof (struct qinqtag_prefix ) + +sizeof (__be16)))) +return -ENOMEM ; + key->eth.vlan.tci = qinqp->tci |htons (VLAN_TAG_PRESENT ); + key->eth.vlan.tpid = qp->eth_type; + key->eth.cvlan.tci = qinqp->ctci |htons (VLAN_TAG_PRESENT ); + key->eth.cvlan.tpid = qinqp->inner_tpid; + +__skb_pull (skb,sizeof (struct qinqtag_prefix )); - qp = (struct qtag_prefix *) skb->data; - key->eth.tci = qp->tci |htons (VLAN_TAG_PRESENT ); -__skb_pull (skb,sizeof (struct qtag_prefix )); +return 0 ; + + }else if (qp->eth_type ==htons (ETH_P_8021Q )) { +if (unlikely (skb->len <sizeof (struct qtag_prefix ) + +sizeof (__be16))) +return 0 ; + +if (unlikely (!pskb_may_pull (skb,sizeof (struct qtag_prefix ) + +sizeof (__be16)))) +return -ENOMEM ; + key->eth.vlan.tci = qp->tci |htons (VLAN_TAG_PRESENT ); + key->eth.vlan.tpid = qp->eth_type; + +__skb_pull (skb,sizeof (struct qtag_prefix )); + }return 0 ; }@@ -480,12 +537,12 @@ static int key_extract(struct sk_buff *skb, struct sw_flow_key *key)* update skb->csum here. */ - key->eth.tci =0 ; -if (skb_vlan_tag_present (skb)) - key->eth.tci =htons (skb->vlan_tci); -else if (eth->h_proto ==htons (ETH_P_8021Q )) -if (unlikely (parse_vlan (skb, key))) -return -ENOMEM ; + key->eth.vlan.tci =0 ; + key->eth.vlan.tpid =0 ; + key->eth.cvlan.tci =0 ; + key->eth.cvlan.tpid =0 ; +if (unlikely (parse_vlan (skb, key))) +return -ENOMEM ; key->eth.type =parse_ethertype (skb);if (unlikely (key->eth.type ==htons (0 )))net/openvswitch/flow.h +10
-1@@ -68,7 +68,16 @@ struct sw_flow_key {struct {u8 src[ETH_ALEN ];/* Ethernet source address. */ u8 dst[ETH_ALEN ];/* Ethernet destination address. */ -__be16 tci;/* 0 if no VLAN, VLAN_TAG_PRESENT set otherwise. */ +struct { +__be16 tpid;/* Outer Vlan type 802.1q or 802.1ad.*/ +__be16 tci;/* 0 if no VLAN, VLAN_TAG_PRESENT */ +/* set otherwise. */ + } vlan; +struct { +__be16 tpid;/* Inner Vlan DL_type 802.1q.*/ +__be16 tci;/* 0 if no CVLAN, VLAN_TAG_PRESENT */ +/* set otherwise. */ + } cvlan;__be16 type;/* Ethernet frame type. */ } eth;union {net/openvswitch/flow_netlink.c +91
-1@@ -811,6 +811,27 @@ static int metadata_from_nlattrs(struct net *net, struct sw_flow_match *match,return 0 ; } +static int cust_vlan_from_nlattrs (struct sw_flow_match *match, +const struct nlattr *a[], +bool is_mask,bool log) +{ +__be16 ctci =0 ; +__be16 c_tpid =0 ; + + ctci =nla_get_be16 (a[OVS_KEY_ATTR_VLAN ]); +if (!(ctci &htons (VLAN_TAG_PRESENT ))) { +if (is_mask) +OVS_NLERR (log,"VLAN CTCI mask does not have exact match for VLAN_TAG_PRESENT bit." ); +else +OVS_NLERR (log,"VLAN CTCI does not have VLAN_TAG_PRESENT bit set." ); +return -EINVAL ; + } + c_tpid =nla_get_be16 (a[OVS_KEY_ATTR_ETHERTYPE ]); +SW_FLOW_KEY_PUT (match, eth.cvlan.tpid, c_tpid, is_mask); +SW_FLOW_KEY_PUT (match, eth.cvlan.tci, ctci, is_mask); +return 0 ; +} +static int ovs_key_from_nlattrs (struct net *net,struct sw_flow_match *match,u64 attrs,const struct nlattr **a,bool is_mask,bool log)@@ -845,7 +866,7 @@ static int ovs_key_from_nlattrs(struct net *net, struct sw_flow_match *match,return -EINVAL ; } -SW_FLOW_KEY_PUT (match, eth.tci, tci, is_mask); +SW_FLOW_KEY_PUT (match, eth.vlan.tci, tci, is_mask); attrs &= ~(1 <<OVS_KEY_ATTR_VLAN ); }@@ -1064,6 +1085,93 @@ static void mask_set_nlattr(struct nlattr *attr, u8 val)nlattr_set (attr, val, ovs_key_lens); } +static int parse_vlan_from_nlattrs (const struct nlattr **nla, +struct sw_flow_match *match, +u64 *key_attrs,bool *ie_valid, +const struct nlattr **a,bool is_mask, +bool log) +{ +int err; +const struct nlattr *encap; + +if (!is_mask) { +u64 v_attrs =0 ; + + err =parse_flow_nlattrs (*nla, a, &v_attrs, log); +if (err) +return err; +/* Another encap attribute here indicates +* the presence of a double tagged vlan. +*/ +if ((v_attrs & (1 <<OVS_KEY_ATTR_ETHERTYPE )) && +eth_type_vlan (nla_get_be16 (a[OVS_KEY_ATTR_ETHERTYPE ]))) { +if (!((v_attrs & (1ULL <<OVS_KEY_ATTR_VLAN )) && + (v_attrs & (1ULL <<OVS_KEY_ATTR_ENCAP )))) { +OVS_NLERR (log,"Invalid Inner VLAN frame" ); +return -EINVAL ; + } +SW_FLOW_KEY_PUT (match, eth.vlan.tpid, +nla_get_be16 (a[OVS_KEY_ATTR_ETHERTYPE ]), + is_mask); + encap = a[OVS_KEY_ATTR_ENCAP ]; + v_attrs &= ~(1 <<OVS_KEY_ATTR_ENCAP ); + + err =cust_vlan_from_nlattrs (match, a, is_mask, log); +if (err) +return err; + *ie_valid = true; + *nla = encap; + +/* Insure that tci key attribute isn't +* overwritten by encapsulated customer tci. +* Ethertype is cleared because it is c_tpid. +*/ + v_attrs &= ~(1 <<OVS_KEY_ATTR_VLAN ); + v_attrs &= ~(1 <<OVS_KEY_ATTR_ETHERTYPE ); + } + *key_attrs |= v_attrs; + +if (*ie_valid) { + err =parse_flow_nlattrs (*nla, a, key_attrs, log); +if (err) +return err; + } + + }else { +u64 mask_v_attrs =0 ; + + err =parse_flow_mask_nlattrs (*nla, a, &mask_v_attrs, log); +if (err) +return err; + +if (mask_v_attrs &1 <<OVS_KEY_ATTR_ENCAP ) { +if (!*ie_valid) { +OVS_NLERR (log,"Encap mask attribute is set for non-CVLAN frame." ); + err = -EINVAL ; +return err; + } + encap = a[OVS_KEY_ATTR_ENCAP ]; + mask_v_attrs &= ~(1 <<OVS_KEY_ATTR_ENCAP ); + + err =cust_vlan_from_nlattrs (match, a, is_mask, log);
net/openvswitch/flow_netlink.c static void mask_set_nlattr(struct nlattr *attr, u8 val) · line 1166
Quoted 10 lines
net/openvswitch/flow_netlink.c +10
-0+if (err) +return err; + *nla = encap; + + mask_v_attrs &= ~(1ULL <<OVS_KEY_ATTR_VLAN ); + mask_v_attrs &= ~(1ULL <<OVS_KEY_ATTR_ETHERTYPE ); + } + + *key_attrs |= mask_v_attrs; +if (*ie_valid) {
Pravin, could you please review the above code encoding the netmask of the tpids. I am seeing a duplicate key (Type 6, ethertype key) discovered by parse_vlan_from_nlattrs() below which I noticed (chagrined I am) only after submitting this patch.
Quoted 165 lines
net/openvswitch/flow_netlink.c +51
-14+ err =parse_flow_mask_nlattrs (*nla, a, key_attrs, log); +if (err) +return err; + } + } +return 0 ; +} +/** * ovs_nla_get_match - parses Netlink attributes into a flow key and * mask. In case the 'mask' is NULL, the flow is treated as exact match @@ -1091,6 +1199,7 @@ int ovs_nla_get_match(struct net *net, struct sw_flow_match *match,u64 key_attrs =0 ;u64 mask_attrs =0 ;bool encap_valid = false; +bool i_encap_valid = false;int err; err =parse_flow_nlattrs (nla_key, a, &key_attrs, log);@@ -1099,11 +1208,11 @@ int ovs_nla_get_match(struct net *net, struct sw_flow_match *match,if ((key_attrs & (1 <<OVS_KEY_ATTR_ETHERNET )) && (key_attrs & (1 <<OVS_KEY_ATTR_ETHERTYPE )) && - (nla_get_be16 (a[OVS_KEY_ATTR_ETHERTYPE ]) ==htons (ETH_P_8021Q ))) { +eth_type_vlan (nla_get_be16 (a[OVS_KEY_ATTR_ETHERTYPE ]))) {__be16 tci; -if (!((key_attrs & (1 <<OVS_KEY_ATTR_VLAN )) && - (key_attrs & (1 <<OVS_KEY_ATTR_ENCAP )))) { +if (!((key_attrs & (1ULL <<OVS_KEY_ATTR_VLAN )) && + (key_attrs & (1ULL <<OVS_KEY_ATTR_ENCAP )))) {OVS_NLERR (log,"Invalid Vlan frame." );return -EINVAL ; }@@ -1115,9 +1224,12 @@ int ovs_nla_get_match(struct net *net, struct sw_flow_match *match, encap_valid = true;if (tci &htons (VLAN_TAG_PRESENT )) { - err =parse_flow_nlattrs (encap, a, &key_attrs, log); + err =parse_vlan_from_nlattrs (&encap, match, &key_attrs, + &i_encap_valid, a, false, + log);if (err)return err; + }else if (!tci) {/* Corner case for truncated 802.1Q header. */ if (nla_len (encap)) {@@ -1169,7 +1281,7 @@ int ovs_nla_get_match(struct net *net, struct sw_flow_match *match, goto free_newmask;/* Always match on tci. */ -SW_FLOW_KEY_PUT (match, eth.tci,htons (0xffff ), true); +SW_FLOW_KEY_PUT (match, eth.vlan.tci,htons (0xffff ), true);if (mask_attrs &1 <<OVS_KEY_ATTR_ENCAP ) {__be16 eth_type =0 ;@@ -1188,10 +1300,13 @@ int ovs_nla_get_match(struct net *net, struct sw_flow_match *match,if (eth_type ==htons (0xffff )) { mask_attrs &= ~(1 <<OVS_KEY_ATTR_ETHERTYPE ); encap = a[OVS_KEY_ATTR_ENCAP ]; - err =parse_flow_mask_nlattrs (encap, a, - &mask_attrs, log); + err =parse_vlan_from_nlattrs (&encap, match, + &mask_attrs, + &i_encap_valid, + a, true, log);if (err) goto free_newmask; + }else {OVS_NLERR (log,"VLAN frames must have an exact match on the TPID (mask=%x)." ,ntohs (eth_type));@@ -1320,6 +1435,7 @@ static int __ovs_nla_put_key(const struct sw_flow_key *swkey, {struct ovs_key_ethernet *eth_key;struct nlattr *nla, *encap; +struct nlattr *in_encap =NULL ;if (nla_put_u32 (skb,OVS_KEY_ATTR_RECIRC_ID , output->recirc_id)) goto nla_put_failure;@@ -1368,17 +1484,36 @@ static int __ovs_nla_put_key(const struct sw_flow_key *swkey,ether_addr_copy (eth_key->eth_src, output->eth.src);ether_addr_copy (eth_key->eth_dst, output->eth.dst); -if (swkey->eth.tci || swkey->eth.type ==htons (ETH_P_8021Q )) { +if (swkey->eth.vlan.tci ||eth_type_vlan (swkey->eth.type)) {__be16 eth_type; - eth_type = !is_mask ?htons (ETH_P_8021Q ) :htons (0xffff ); + + eth_type = !is_mask ? output->eth.vlan.tpid :htons (0xffff ); +if (nla_put_be16 (skb,OVS_KEY_ATTR_ETHERTYPE , eth_type) || -nla_put_be16 (skb,OVS_KEY_ATTR_VLAN , output->eth.tci)) +nla_put_be16 (skb,OVS_KEY_ATTR_VLAN , output->eth.vlan.tci)) goto nla_put_failure; encap =nla_nest_start (skb,OVS_KEY_ATTR_ENCAP ); -if (!swkey->eth.tci) +if (!swkey->eth.vlan.tci) goto unencap; - }else +if (swkey->eth.cvlan.tci) { +__be16 eth_type; + +/* Customer tci is nested but uses same key attribute. +*/ + eth_type = !is_mask ? output->eth.cvlan.tpid : +htons (0xffff ); +if (nla_put_be16 (skb,OVS_KEY_ATTR_ETHERTYPE , + eth_type) || +nla_put_be16 (skb,OVS_KEY_ATTR_VLAN , + output->eth.cvlan.tci)) + goto nla_put_failure; + in_encap =nla_nest_start (skb,OVS_KEY_ATTR_ENCAP ); +if (!swkey->eth.cvlan.tci) + goto unencap; + } + }else { encap =NULL ; + }if (swkey->eth.type ==htons (ETH_P_802_2 )) {/* @@ -1525,6 +1660,8 @@ static int __ovs_nla_put_key(const struct sw_flow_key *swkey, unencap:if (encap)nla_nest_end (skb, encap); +if (in_encap) +nla_nest_end (skb, in_encap);return 0 ;@@ -2174,7 +2311,7 @@ static int __ovs_nla_copy_actions(struct net *net, const struct nlattr *attr,case OVS_ACTION_ATTR_PUSH_VLAN : vlan =nla_data (a); -if (vlan->vlan_tpid !=htons (ETH_P_8021Q )) +if (!eth_type_vlan (vlan->vlan_tpid))return -EINVAL ;if (!(vlan->vlan_tci &htons (VLAN_TAG_PRESENT )))return -EINVAL ;@@ -2279,7 +2416,7 @@ int ovs_nla_copy_actions(struct net *net, const struct nlattr *attr, (*sfa)->orig_len =nla_len (attr); err =__ovs_nla_copy_actions (net, attr, key,0 , sfa, key->eth.type, - key->eth.tci, log); + key->eth.vlan.tci, log);if (err)ovs_nla_free_flow_actions (*sfa);net/openvswitch/vport-netdev.c +3
-1@@ -194,7 +194,9 @@ static unsigned int packet_length(const struct sk_buff *skb) {unsigned int length = skb->len -ETH_HLEN ; -if (skb->protocol ==htons (ETH_P_8021Q )) +if (eth_type_vlan (skb->protocol)) + length -=VLAN_HLEN ; +if (skb->protocol ==htons (ETH_P_8021AD )) length -=VLAN_HLEN ;return length;
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: [PATCH net-next V14 3/3] openvswitch: 802.1ad: Flow handling, actions, vlan parsing and netlink attributes
Quoted 17 lines · Thomas F Herbert
Quoted 16 lines · Thomas F Herbert
Add support for 802.1ad including the ability to push and pop double tagged vlans. Add support for 802.1ad to netlink parsing and flow conversion. Uses double nested encap attributes to represent double tagged vlan. Inner TPID encoded along with ctci in nested attributes.
Signed-off-by Thomas F Herbert <[email protected]>--- net/openvswitch/actions.c | 4 +- net/openvswitch/flow.c | 87 +++++++++++++++++---- net/openvswitch/flow.h | 11 ++- net/openvswitch/flow_netlink.c | 167 +++++++++++++++++++++++++++++++++++++---- net/openvswitch/vport-netdev.c | 4 +- 5 files changed, 239 insertions(+), 34 deletions(-)
...
Quoted 131 lines
Quoted 131 lines
net/openvswitch/flow_netlink.c +20
-0@@ -811,6 +811,27 @@ static int metadata_from_nlattrs(struct net *net,struct sw_flow_match *match, return 0; } +static int cust_vlan_from_nlattrs(struct sw_flow_match *match, +const struct nlattr *a[], +bool is_mask,bool log) +{ +__be16 ctci =0 ; +__be16 c_tpid =0 ; + + ctci =nla_get_be16 (a[OVS_KEY_ATTR_VLAN ]); +if (!(ctci &htons (VLAN_TAG_PRESENT ))) { +if (is_mask) + OVS_NLERR(log, "VLAN CTCI mask does not have exact match for VLAN_TAG_PRESENT bit."); +else + OVS_NLERR(log, "VLAN CTCI does not have VLAN_TAG_PRESENT bit set."); +return -EINVAL ; + } + c_tpid =nla_get_be16 (a[OVS_KEY_ATTR_ETHERTYPE ]); +SW_FLOW_KEY_PUT (match, eth.cvlan.tpid, c_tpid, is_mask); +SW_FLOW_KEY_PUT (match, eth.cvlan.tci, ctci, is_mask); +return 0 ; +} + static int ovs_key_from_nlattrs(struct net *net, struct sw_flow_match*match,
u64 attrs, const struct nlattr **a, boolis_mask, bool log)net/openvswitch/flow_netlink.c +1
-0@@ -845,7 +866,7 @@ static int ovs_key_from_nlattrs(struct net *net,struct sw_flow_match *match, return -EINVAL; } -SW_FLOW_KEY_PUT (match, eth.tci, tci, is_mask); +SW_FLOW_KEY_PUT (match, eth.vlan.tci, tci, is_mask); attrs &= ~(1 <<OVS_KEY_ATTR_VLAN ); } @@ -1064,6 +1085,93 @@ static void mask_set_nlattr(struct nlattr *attr,u8 val)
nlattr_set(attr, val, ovs_key_lens);}
+static int parse_vlan_from_nlattrs(const struct nlattr **nla,net/openvswitch/flow_netlink.c +19
-0+struct sw_flow_match *match, + u64 *key_attrs, bool *ie_valid, + const struct nlattr **a, bool is_mask, + bool log) +{ + int err; +const struct nlattr *encap; + +if (!is_mask) { +u64 v_attrs =0 ; + + err =parse_flow_nlattrs (*nla, a, &v_attrs, log); +if (err) +return err; +/* Another encap attribute here indicates +* the presence of a double tagged vlan. +*/ + if ((v_attrs & (1 << OVS_KEY_ATTR_ETHERTYPE)) && +eth_type_vlan(nla_get_be16(a[OVS_KEY_ATTR_ETHERTYPE]))) {
net/openvswitch/flow_netlink.c +3
-0+if (!((v_attrs & (1ULL <<OVS_KEY_ATTR_VLAN )) && + (v_attrs & (1ULL <<OVS_KEY_ATTR_ENCAP )))) { + OVS_NLERR(log, "Invalid Inner VLANframe");
net/openvswitch/flow_netlink.c +4
-0+return -EINVAL ; + } + SW_FLOW_KEY_PUT(match, eth.vlan.tpid, +
nla_get_be16(a[OVS_KEY_ATTR_ETHERTYPE]),net/openvswitch/flow_netlink.c +5
-0+ is_mask); + encap = a[OVS_KEY_ATTR_ENCAP ]; + v_attrs &= ~(1 <<OVS_KEY_ATTR_ENCAP ); + + err = cust_vlan_from_nlattrs(match, a, is_mask,log);
net/openvswitch/flow_netlink.c +24
-0+if (err) +return err; + *ie_valid = true; + *nla = encap; + +/* Insure that tci key attribute isn't +* overwritten by encapsulated customer tci. +* Ethertype is cleared because it is c_tpid. +*/ + v_attrs &= ~(1 <<OVS_KEY_ATTR_VLAN ); + v_attrs &= ~(1 <<OVS_KEY_ATTR_ETHERTYPE ); + } + *key_attrs |= v_attrs; + +if (*ie_valid) { + err =parse_flow_nlattrs (*nla, a, key_attrs, log); +if (err) +return err; + } + + }else { +u64 mask_v_attrs =0 ; + + err = parse_flow_mask_nlattrs(*nla, a, &mask_v_attrs,log);
net/openvswitch/flow_netlink.c +6
-0+if (err) +return err; + +if (mask_v_attrs &1 <<OVS_KEY_ATTR_ENCAP ) { +if (!*ie_valid) { + OVS_NLERR(log, "Encap mask attribute isset for non-CVLAN frame.");
net/openvswitch/flow_netlink.c +7
-0+ err = -EINVAL ; +return err; + } + encap = a[OVS_KEY_ATTR_ENCAP ]; + mask_v_attrs &= ~(1 <<OVS_KEY_ATTR_ENCAP ); + + err = cust_vlan_from_nlattrs(match, a, is_mask,log);
net/openvswitch/flow_netlink.c +7
-0+if (err) +return err; + *nla = encap; + + mask_v_attrs &= ~(1ULL <<OVS_KEY_ATTR_VLAN ); + mask_v_attrs &= ~(1ULL <<OVS_KEY_ATTR_ETHERTYPE ); + }
Quoted 9 lines
net/openvswitch/flow_netlink.c static void mask_set_nlattr(struct nlattr *attr, u8 val) · line 1166
Quoted 3 lines
net/openvswitch/flow_netlink.c +3
-0+ + *key_attrs |= mask_v_attrs; +if (*ie_valid) {Pravin, could you please review the above code encoding the netmask of the tpids. I am seeing a duplicate key (Type 6, ethertype key) discovered by
parse_vlan_from_nlattrs()below which I noticed (chagrined I am) only after submitting this patch.
Sure, I'm halfway through the review. Once it finished I will post it.
_______________________________________________
dev mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/dev
Re: [PATCH net-next V14 3/3] openvswitch: 802.1ad: Flow handling, actions, vlan parsing and netlink attributes
In reply to Thomas F HerbertQuoted 19 lines · Thomas F Herbert
Add support for 802.1ad including the ability to push and pop double tagged vlans. Add support for 802.1ad to netlink parsing and flow conversion. Uses double nested encap attributes to represent double tagged vlan. Inner TPID encoded along with ctci in nested attributes.
Signed-off-by Thomas F Herbert <[email protected]>--- net/openvswitch/actions.c | 4 +- net/openvswitch/flow.c | 87 +++++++++++++++++---- net/openvswitch/flow.h | 11 ++- net/openvswitch/flow_netlink.c | 167 +++++++++++++++++++++++++++++++++++++---- net/openvswitch/vport-netdev.c | 4 +- 5 files changed, 239 insertions(+), 34 deletions(-)net/openvswitch/actions.c +0
-0
net/openvswitch/actions.c static int pop_vlan(struct sk_buff *skb, struct sw_flow_key *key) · line 239
Quoted 5 lines
net/openvswitch/actions.c +1
-1@@ -236,7 +236,7 @@ static int pop_vlan(struct sk_buff *skb, struct sw_flow_key *key)if (skb_vlan_tag_present (skb))invalidate_flow_key (key);else - key->eth.tci =0 ; + key->eth.vlan.tci =0 ;
Since new tpid field is introduced, it needs to be updated here.
net/openvswitch/actions.c static int push_vlan(struct sk_buff *skb, struct sw_flow_key *key, · line 249
Quoted 9 lines
net/openvswitch/actions.c +1
-1return err; }@@ -246,7 +246,7 @@ static int push_vlan(struct sk_buff *skb, struct sw_flow_key *key,if (skb_vlan_tag_present (skb))invalidate_flow_key (key);else - key->eth.tci = vlan->vlan_tci; + key->eth.vlan.tci = vlan->vlan_tci;
Same as above, tpid needs to be updated here.
Quoted 35 lines
net/openvswitch/actions.c +0
-0return skb_vlan_push (skb, vlan->vlan_tpid,ntohs (vlan->vlan_tci) & ~VLAN_TAG_PRESENT ); }net/openvswitch/flow.c +18
-3@@ -305,21 +305,78 @@ static bool icmp6hdr_ok(struct sk_buff *skb) static int parse_vlan(struct sk_buff *skb, struct sw_flow_key *key) { struct qtag_prefix { -__be16 eth_type;/* ETH_P_8021Q */ + __be16 eth_type; /* ETH_P_8021Q or ETH_P_8021AD */ __be16 tci; }; -struct qtag_prefix *qp; + struct qtag_prefix *qp = (struct qtag_prefix *)skb->data; -if (unlikely (skb->len <sizeof (struct qtag_prefix ) +sizeof (__be16))) + struct qinqtag_prefix { + __be16 eth_type; /* ETH_P_8021Q or ETH_P_8021AD */ + __be16 tci; + __be16 inner_tpid; /* ETH_P_8021Q */ + __be16 ctci; + }; + + if (likely(skb_vlan_tag_present(skb))) { + key->eth.vlan.tci = htons(skb->vlan_tci); + key->eth.vlan.tpid = skb->vlan_proto; + + /* Case where upstream + * processing has already stripped the outer vlan tag. + */ + if (unlikely(skb->vlan_proto == htons(ETH_P_8021AD))) { + if (unlikely(skb->len < sizeof(struct qtag_prefix) +
net/openvswitch/flow.c static bool icmp6hdr_ok(struct sk_buff *skb) · line 338
Quoted 10 lines
net/openvswitch/flow.c +10
-0+ sizeof(__be16))) { + key->eth.vlan.tci =0 ; +return 0 ; + } + +if (unlikely (!pskb_may_pull (skb, +sizeof (struct qtag_prefix ) + +sizeof (__be16)))) +return -ENOMEM ; +
Comment regarding qp pointer is ignored from previous review. Most of comment in this function from earlier review still apply.
Quoted 5 lines
net/openvswitch/flow.c +5
-0+ key->eth.cvlan.tci = + qp->tci |htons (VLAN_TAG_PRESENT ); + key->eth.cvlan.tpid = qp->eth_type; + +__skb_pull (skb,sizeof (struct qtag_prefix ));
net/openvswitch/flow.c static bool icmp6hdr_ok(struct sk_buff *skb) · line 350
Quoted 10 lines
net/openvswitch/flow.c +5
-3+ }return 0 ; -if (unlikely (!pskb_may_pull (skb,sizeof (struct qtag_prefix ) + -sizeof (__be16)))) -return -ENOMEM ; + }else if (qp->eth_type ==htons (ETH_P_8021AD )) { +struct qinqtag_prefix *qinqp = + (struct qinqtag_prefix *)skb->data; +
This code can be further simplified by just defining struct qtag_prefix. and parsing it twice in this case.
Quoted 35 lines
net/openvswitch/flow.c +28
-3+if (unlikely (skb->len <sizeof (struct qinqtag_prefix ) + +sizeof (__be16))) +return 0 ; + +if (unlikely (!pskb_may_pull (skb,sizeof (struct qinqtag_prefix ) + +sizeof (__be16)))) +return -ENOMEM ; + key->eth.vlan.tci = qinqp->tci |htons (VLAN_TAG_PRESENT ); + key->eth.vlan.tpid = qp->eth_type; + key->eth.cvlan.tci = qinqp->ctci |htons (VLAN_TAG_PRESENT ); + key->eth.cvlan.tpid = qinqp->inner_tpid; + +__skb_pull (skb,sizeof (struct qinqtag_prefix )); - qp = (struct qtag_prefix *) skb->data; - key->eth.tci = qp->tci |htons (VLAN_TAG_PRESENT ); -__skb_pull (skb,sizeof (struct qtag_prefix )); +return 0 ; + + }else if (qp->eth_type ==htons (ETH_P_8021Q )) { +if (unlikely (skb->len <sizeof (struct qtag_prefix ) + +sizeof (__be16))) +return 0 ; + +if (unlikely (!pskb_may_pull (skb,sizeof (struct qtag_prefix ) + +sizeof (__be16)))) +return -ENOMEM ; + key->eth.vlan.tci = qp->tci |htons (VLAN_TAG_PRESENT ); + key->eth.vlan.tpid = qp->eth_type; + +__skb_pull (skb,sizeof (struct qtag_prefix )); + }return 0 ; }
...
Quoted 8 lines
net/openvswitch/flow_netlink.c +0
-0@@ -811,6 +811,27 @@ static int metadata_from_nlattrs(struct net *net, struct sw_flow_match *match,return 0 ; }
...
Quoted 34 lines
static int ovs_key_from_nlattrs(struct net *net, struct
sw_flow_match*match,
u64 attrs, const struct nlattr **a, boolis_mask, bool log)net/openvswitch/flow_netlink.c +19
-1@@ -845,7 +866,7 @@ static int ovs_key_from_nlattrs(struct net *net, struct sw_flow_match *match,return -EINVAL ; } -SW_FLOW_KEY_PUT (match, eth.tci, tci, is_mask); +SW_FLOW_KEY_PUT (match, eth.vlan.tci, tci, is_mask); attrs &= ~(1 <<OVS_KEY_ATTR_VLAN ); }@@ -1064,6 +1085,93 @@ static void mask_set_nlattr(struct nlattr *attr, u8 val)nlattr_set (attr, val, ovs_key_lens); } +static int parse_vlan_from_nlattrs (const struct nlattr **nla, +struct sw_flow_match *match, +u64 *key_attrs,bool *ie_valid, +const struct nlattr **a,bool is_mask, +bool log) +{ +int err; +const struct nlattr *encap; + +if (!is_mask) { +u64 v_attrs =0 ; + + err =parse_flow_nlattrs (*nla, a, &v_attrs, log); +if (err) +return err; +/* Another encap attribute here indicates +* the presence of a double tagged vlan. +*/
net/openvswitch/flow_netlink.c static void mask_set_nlattr(struct nlattr *attr, u8 val) · line 1115
Quoted 10 lines
net/openvswitch/flow_netlink.c +10
-0+if ((v_attrs & (1 <<OVS_KEY_ATTR_ETHERTYPE )) && +eth_type_vlan (nla_get_be16 (a[OVS_KEY_ATTR_ETHERTYPE ]))) { +if (!((v_attrs & (1ULL <<OVS_KEY_ATTR_VLAN )) && + (v_attrs & (1ULL <<OVS_KEY_ATTR_ENCAP )))) { +OVS_NLERR (log,"Invalid Inner VLAN frame" ); +return -EINVAL ; + } +SW_FLOW_KEY_PUT (match, eth.vlan.tpid, +nla_get_be16 (a[OVS_KEY_ATTR_ETHERTYPE ]), + is_mask);
eth.vlan.tpid is only set in case of double nested vlan case.
net/openvswitch/flow_netlink.c static void mask_set_nlattr(struct nlattr *attr, u8 val) · line 1118
Quoted 3 lines
net/openvswitch/flow_netlink.c +3
-0+ encap = a[OVS_KEY_ATTR_ENCAP ]; + v_attrs &= ~(1 <<OVS_KEY_ATTR_ENCAP ); +
This bit masking can be grouped with the following operation.
Quoted 10 lines
net/openvswitch/flow_netlink.c +10
-0+ err =cust_vlan_from_nlattrs (match, a, is_mask, log); +if (err) +return err; + *ie_valid = true; + *nla = encap; + +/* Insure that tci key attribute isn't +* overwritten by encapsulated customer tci. +* Ethertype is cleared because it is c_tpid. +*/
net/openvswitch/flow_netlink.c static void mask_set_nlattr(struct nlattr *attr, u8 val) · line 1138
Quoted 10 lines
net/openvswitch/flow_netlink.c +10
-0+ v_attrs &= ~(1 <<OVS_KEY_ATTR_VLAN ); + v_attrs &= ~(1 <<OVS_KEY_ATTR_ETHERTYPE ); + } + *key_attrs |= v_attrs; + +if (*ie_valid) { + err =parse_flow_nlattrs (*nla, a, key_attrs, log); +if (err) +return err; + }
Why is the parsing is not done inside the nested block?
Quoted 4 lines
net/openvswitch/flow_netlink.c +4
-0+ + }else { +u64 mask_v_attrs =0 ; +
net/openvswitch/flow_netlink.c static void mask_set_nlattr(struct nlattr *attr, u8 val) · line 1152
Quoted 10 lines
net/openvswitch/flow_netlink.c +10
-0+ err =parse_flow_mask_nlattrs (*nla, a, &mask_v_attrs, log); +if (err) +return err; + +if (mask_v_attrs &1 <<OVS_KEY_ATTR_ENCAP ) { +if (!*ie_valid) { +OVS_NLERR (log,"Encap mask attribute is set for non-CVLAN frame." ); + err = -EINVAL ; +return err; + }
Double nested eth-type mask should be 0xffff. Same as single nested eth-type check
Quoted 5 lines
net/openvswitch/flow_netlink.c +5
-0+ encap = a[OVS_KEY_ATTR_ENCAP ]; + mask_v_attrs &= ~(1 <<OVS_KEY_ATTR_ENCAP ); + + err =cust_vlan_from_nlattrs (match, a, is_mask, log); +if (err)
net/openvswitch/flow_netlink.c static void mask_set_nlattr(struct nlattr *attr, u8 val) · line 1167
Quoted 10 lines
net/openvswitch/flow_netlink.c +10
-0+return err; + *nla = encap; + + mask_v_attrs &= ~(1ULL <<OVS_KEY_ATTR_VLAN ); + mask_v_attrs &= ~(1ULL <<OVS_KEY_ATTR_ETHERTYPE ); + } + + *key_attrs |= mask_v_attrs; +if (*ie_valid) { + err =parse_flow_mask_nlattrs (*nla, a, key_attrs, log);
Same as above. I think the parsing can be done inside the nested block.
Quoted 7 lines
net/openvswitch/flow_netlink.c +7
-0+if (err) +return err; + } + } +return 0 ; +} +
...
net/openvswitch/flow_netlink.c static int __ovs_nla_put_key(const struct sw_flow_key *swkey, · line 1665
Quoted 7 lines
net/openvswitch/flow_netlink.c +2
-0@@ -1525,6 +1660,8 @@ static int __ovs_nla_put_key(const struct sw_flow_key *swkey, unencap:if (encap)nla_nest_end (skb, encap); +if (in_encap) +nla_nest_end (skb, in_encap);
Inner nested encap should end first.
Quoted 38 lines · Thomas F Herbert
Although the Open Flow specification specified support for 802.1AD (qinq) as well as push and pop vlan headers, So far Open vSwitch has only supported a single tag header. This patch implements 802.1AD in the kernel module.
This patch accompanies version 14 of the user level openvswitch patch submitted to openvswitch dev list.
V14: Add outer tpid to
flow_keyV13: Fix incorrect encoding and decoding of netlink to/from key attributes.
V12: Fix some problems and issues pointed out by reviewers. When parsing netlink attributes Ether types other then
0x88a8as outer tpid.V11: Add inner tpid to flow key. Fix separate inner encap attribute when parsing netlink attributes. Merge 2 patches to consolidate qinq changes.
V10: Implement reviewer comments: Consolidate vlan parsing functions. Splits netlink parsing and flow conversion into a separate patch. Uses double encap attribute encapsulation for 802.1ad. Netlink attributes now look like this:
eth_type(0x88a8),vlan(vid=100),encap(eth_type(0x8100), vlan(vid=200), encap(eth_type(0x0800), ...))The double encap atributes in this version of the patch is incompatible with old versions of the user level 802.1ad patch. A new user level patch which is also being submitted simultaneously to openvswitch dev mailing list.
V9: Includes changes suggested by reviewers
V8: Includes changes suggested by reviewers
V7: Includes changes suggested by reviewers
Quoted 9 lines
V6: Rebased to net-next
V5: Use encapsulated attributes
For discussion, history and previous versions of the kernel module patch and the user code patch see the OVS dev mailing list, openvswitch.org/pipermail/dev/..
Hi Thomas,
Can you send me link to userspace patches, so that I can try it out.
Thanks,
Pravin.
_______________________________________________
dev mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/dev
PATCH v14 1/3 openvswitch: 802.1ad uapi changes.
In reply to Thomas F Herbertopenvswitch: Add support for 8021.AD
Change the description of the VLAN tpid field.
--- include/uapi/linux/openvswitch.h | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-)
include/uapi/linux/openvswitch.h +9 -8
@@ -585,13 +585,13 @@ struct ovs_action_push_mpls {* @vlan_tci: Tag control identifier (TCI) to push. The CFI bit must be set * (but it will not be set in the 802.1Q header that is pushed). * -* The @vlan_tpid value is typically %ETH_P_8021Q. The only acceptable TPID -* values are those that the kernel module also parses as 802.1Q headers, to -* prevent %OVS_ACTION_ATTR_PUSH_VLAN followed by %OVS_ACTION_ATTR_POP_VLAN -* from having surprising results. +* The @vlan_tpid value is typically %ETH_P_8021Q or %ETH_P_8021AD. +* The only acceptable TPID values are those that the kernel module also parses +* as 802.1Q or 802.1AD headers, to prevent %OVS_ACTION_ATTR_PUSH_VLAN followed +* by %OVS_ACTION_ATTR_POP_VLAN from having surprising results. */ struct ovs_action_push_vlan { -__be16 vlan_tpid;/* 802.1Q TPID. */ +__be16 vlan_tpid;/* 802.1Q or 802.1ad TPID. */ __be16 vlan_tci;/* 802.1Q TCI (VLAN ID and priority). */ };
@@ -664,9 +664,10 @@ enum ovs_ct_attr {* is copied from the value to the packet header field, rest of the bits are * left unchanged. The non-masked value bits must be passed in as zeroes. * Masking is not supported for the %OVS_KEY_ATTR_TUNNEL attribute. -* @OVS_ACTION_ATTR_PUSH_VLAN: Push a new outermost 802.1Q header onto the -* packet. -* @OVS_ACTION_ATTR_POP_VLAN: Pop the outermost 802.1Q header off the packet. +* @OVS_ACTION_ATTR_PUSH_VLAN: Push a new outermost 802.1Q or 802.1ad header +* onto the packet. +* @OVS_ACTION_ATTR_POP_VLAN: Pop the outermost 802.1Q or 802.1ad header +* from the packet. * @OVS_ACTION_ATTR_SAMPLE: Probabilitically executes actions, as specified in * the nested %OVS_SAMPLE_ATTR_* attributes. * @OVS_ACTION_ATTR_PUSH_MPLS: Push a new MPLS label stack entry onto the
Signature · 1 line
2.4.3
PATCH v14 2/3 openvswitch: Check for vlan ethernet types for 8021.q or 802.1ad
In reply to Thomas F Herbert--- include/linux/if_vlan.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
include/linux/if_vlan.h +17 -0
@@ -627,6 +627,23 @@ static inline netdev_features_t vlan_features_check(const struct sk_buff *skb,return features; } +/** +* eth_type_vlan - check for valid vlan ether type. +* @ethertype: ether type to check +* +* Returns true if the ether type is a vlan ether type. +*/ +static inline bool eth_type_vlan (__be16 ethertype) +{ +switch (ethertype) { +case (htons (ETH_P_8021Q )): +return true; +case (htons (ETH_P_8021AD )): +return true; +default : +return false; + } +}/** * compare_vlan_header - Compare two vlan headers
Signature · 1 line
2.4.3