regulator: tps6105x: Convert to use regmap helper functions
PATCH 1/1 regulator: tps6105x: Convert to use regmap helper functions
Since commit 7e5071199355 ("mfd: tps6105x: Use i2c regmap to access registers"), we can use regmap helper functions instead of open coded.
---
Hi Grigoryev,
I don't have this h/w, can you help test this patch? Thanks.
This patch depends on commit 7e5071199355
"mfd: tps6105x: Use i2c regmap to access registers" which is currently in mfd tree.
drivers/regulator/tps6105x-regulator.c | 95 +++++----------------------------- 1 file changed, 12 insertions(+), 83 deletions(-)
drivers/regulator/tps6105x-regulator.c +12 -83
@@ -27,90 +27,12 @@ static const unsigned int tps6105x_voltages[] = { 5000000, /* There is an additional 5V */ }; -static int tps6105x_regulator_enable (struct regulator_dev *rdev) -{ -struct tps6105x *tps6105x =rdev_get_drvdata (rdev); -int ret; - -/* Activate voltage mode */ - ret =regmap_update_bits (tps6105x->regmap,TPS6105X_REG_0 , -TPS6105X_REG0_MODE_MASK , -TPS6105X_REG0_MODE_VOLTAGE <<TPS6105X_REG0_MODE_SHIFT ); -if (ret) -return ret; - -return 0 ; -} - -static int tps6105x_regulator_disable (struct regulator_dev *rdev) -{ -struct tps6105x *tps6105x =rdev_get_drvdata (rdev); -int ret; - -/* Set into shutdown mode */ - ret =regmap_update_bits (tps6105x->regmap,TPS6105X_REG_0 , -TPS6105X_REG0_MODE_MASK , -TPS6105X_REG0_MODE_SHUTDOWN <<TPS6105X_REG0_MODE_SHIFT ); -if (ret) -return ret; - -return 0 ; -} - -static int tps6105x_regulator_is_enabled (struct regulator_dev *rdev) -{ -struct tps6105x *tps6105x =rdev_get_drvdata (rdev); -unsigned int regval; -int ret; - - ret =regmap_read (tps6105x->regmap,TPS6105X_REG_0 , ®val); -if (ret) -return ret; - regval &=TPS6105X_REG0_MODE_MASK ; - regval >>=TPS6105X_REG0_MODE_SHIFT ; - -if (regval ==TPS6105X_REG0_MODE_VOLTAGE ) -return 1 ; - -return 0 ; -} - -static int tps6105x_regulator_get_voltage_sel (struct regulator_dev *rdev) -{ -struct tps6105x *tps6105x =rdev_get_drvdata (rdev); -unsigned int regval; -int ret; - - ret =regmap_read (tps6105x->regmap,TPS6105X_REG_0 , ®val); -if (ret) -return ret; - - regval &=TPS6105X_REG0_VOLTAGE_MASK ; - regval >>=TPS6105X_REG0_VOLTAGE_SHIFT ; -return (int ) regval; -} - -static int tps6105x_regulator_set_voltage_sel (struct regulator_dev *rdev, -unsigned selector) -{ -struct tps6105x *tps6105x =rdev_get_drvdata (rdev); -int ret; - - ret =regmap_update_bits (tps6105x->regmap,TPS6105X_REG_0 , -TPS6105X_REG0_VOLTAGE_MASK , - selector <<TPS6105X_REG0_VOLTAGE_SHIFT ); -if (ret) -return ret; - -return 0 ; -} -static struct regulator_ops tps6105x_regulator_ops = { - .enable = tps6105x_regulator_enable, - .disable = tps6105x_regulator_disable, - .is_enabled = tps6105x_regulator_is_enabled, - .get_voltage_sel = tps6105x_regulator_get_voltage_sel, - .set_voltage_sel = tps6105x_regulator_set_voltage_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, .list_voltage = regulator_list_voltage_table, };
@@ -122,6 +44,12 @@ static const struct regulator_desc tps6105x_regulator_desc = { .owner = THIS_MODULE, .n_voltages = ARRAY_SIZE(tps6105x_voltages), .volt_table = tps6105x_voltages, + .vsel_reg = TPS6105X_REG_0, + .vsel_mask = TPS6105X_REG0_VOLTAGE_MASK, + .enable_reg = TPS6105X_REG_0, + .enable_mask = TPS6105X_REG0_MODE_MASK, + .enable_val = TPS6105X_REG0_MODE_VOLTAGE << + TPS6105X_REG0_MODE_SHIFT, };/*
@@ -144,6 +72,7 @@ static int tps6105x_regulator_probe(struct platform_device *pdev) config.dev = &tps6105x->client->dev; config.init_data = pdata->regulator_data; config.driver_data = tps6105x; + config.regmap = tps6105x->regmap;/* Register regulator with framework */ tps6105x->regulator = devm_regulator_register(&pdev->dev,
Signature · 1 line
2.1.4
Hi,
Quoted 8 lines · Axel Lin
Since commit
7e5071199355("mfd: tps6105x: Use i2c regmap to access registers"), we can use regmap helper functions instead of open coded.Signed-off-by Axel Lin <[email protected]>---
Hi Grigoryev,
I don't have this h/w, can you help test this patch? Thanks.
Working fine on ARM Freescale IMX6Q machine mfd git tree. Regulator tested for enable/disable and voltage change.
Regards,
Denis ���{.n�+�������+%�����ݶ��w��{.n�+����{��G�����{ay�ʇڙ�,j��f���h��������z_�(�階�ݢj"���m������G������?����&���~��iO��z��v�^�m����������?�I�
Mark Brown
maintainerQuoted 2 lines · Axel Lin
Since commit
7e5071199355("mfd: tps6105x: Use i2c regmap to access registers"), we can use regmap helper functions instead of open coded.
I'll merge this after the merge window.
Mark Brown
maintainerApplied "regulator: tps6105x: Convert to use regmap helper functions" to the regulator tree
In reply to Axel LinThe patch
regulator: tps6105x: Convert to use regmap helper functions
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
fad2ba681c74f785d56a2401bb9db615843a465aMon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Wed, 18 Nov 2015 16:22:52 +0800
Subject: [PATCH] regulator: tps6105x: Convert to use regmap helper functions
Since commit 7e5071199355 ("mfd: tps6105x: Use i2c regmap to access registers"), we can use regmap helper functions instead of open coded.
--- drivers/regulator/tps6105x-regulator.c | 95 +++++----------------------------- 1 file changed, 12 insertions(+), 83 deletions(-)
drivers/regulator/tps6105x-regulator.c +12 -83
@@ -27,90 +27,12 @@ static const unsigned int tps6105x_voltages[] = { 5000000, /* There is an additional 5V */ }; -static int tps6105x_regulator_enable (struct regulator_dev *rdev) -{ -struct tps6105x *tps6105x =rdev_get_drvdata (rdev); -int ret; - -/* Activate voltage mode */ - ret =regmap_update_bits (tps6105x->regmap,TPS6105X_REG_0 , -TPS6105X_REG0_MODE_MASK , -TPS6105X_REG0_MODE_VOLTAGE <<TPS6105X_REG0_MODE_SHIFT ); -if (ret) -return ret; - -return 0 ; -} - -static int tps6105x_regulator_disable (struct regulator_dev *rdev) -{ -struct tps6105x *tps6105x =rdev_get_drvdata (rdev); -int ret; - -/* Set into shutdown mode */ - ret =regmap_update_bits (tps6105x->regmap,TPS6105X_REG_0 , -TPS6105X_REG0_MODE_MASK , -TPS6105X_REG0_MODE_SHUTDOWN <<TPS6105X_REG0_MODE_SHIFT ); -if (ret) -return ret; - -return 0 ; -} - -static int tps6105x_regulator_is_enabled (struct regulator_dev *rdev) -{ -struct tps6105x *tps6105x =rdev_get_drvdata (rdev); -unsigned int regval; -int ret; - - ret =regmap_read (tps6105x->regmap,TPS6105X_REG_0 , ®val); -if (ret) -return ret; - regval &=TPS6105X_REG0_MODE_MASK ; - regval >>=TPS6105X_REG0_MODE_SHIFT ; - -if (regval ==TPS6105X_REG0_MODE_VOLTAGE ) -return 1 ; - -return 0 ; -} - -static int tps6105x_regulator_get_voltage_sel (struct regulator_dev *rdev) -{ -struct tps6105x *tps6105x =rdev_get_drvdata (rdev); -unsigned int regval; -int ret; - - ret =regmap_read (tps6105x->regmap,TPS6105X_REG_0 , ®val); -if (ret) -return ret; - - regval &=TPS6105X_REG0_VOLTAGE_MASK ; - regval >>=TPS6105X_REG0_VOLTAGE_SHIFT ; -return (int ) regval; -} - -static int tps6105x_regulator_set_voltage_sel (struct regulator_dev *rdev, -unsigned selector) -{ -struct tps6105x *tps6105x =rdev_get_drvdata (rdev); -int ret; - - ret =regmap_update_bits (tps6105x->regmap,TPS6105X_REG_0 , -TPS6105X_REG0_VOLTAGE_MASK , - selector <<TPS6105X_REG0_VOLTAGE_SHIFT ); -if (ret) -return ret; - -return 0 ; -} -static struct regulator_ops tps6105x_regulator_ops = { - .enable = tps6105x_regulator_enable, - .disable = tps6105x_regulator_disable, - .is_enabled = tps6105x_regulator_is_enabled, - .get_voltage_sel = tps6105x_regulator_get_voltage_sel, - .set_voltage_sel = tps6105x_regulator_set_voltage_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, .list_voltage = regulator_list_voltage_table, };
@@ -122,6 +44,12 @@ static const struct regulator_desc tps6105x_regulator_desc = { .owner = THIS_MODULE, .n_voltages = ARRAY_SIZE(tps6105x_voltages), .volt_table = tps6105x_voltages, + .vsel_reg = TPS6105X_REG_0, + .vsel_mask = TPS6105X_REG0_VOLTAGE_MASK, + .enable_reg = TPS6105X_REG_0, + .enable_mask = TPS6105X_REG0_MODE_MASK, + .enable_val = TPS6105X_REG0_MODE_VOLTAGE << + TPS6105X_REG0_MODE_SHIFT, };/*
@@ -144,6 +72,7 @@ static int tps6105x_regulator_probe(struct platform_device *pdev) config.dev = &tps6105x->client->dev; config.init_data = pdata->regulator_data; config.driver_data = tps6105x; + config.regmap = tps6105x->regmap;/* Register regulator with framework */ tps6105x->regulator = devm_regulator_register(&pdev->dev,
Signature · 1 line
2.6.2