Staging: rtl8712: drv_types.h:Coding style warnings fix for block comments

index e62543d..3d64fee 100644
@@ -23,11 +23,12 @@
  * Larry Finger <[email protected]>
  *
  ******************************************************************************/
-/*---------------------------------------------------------------------
-
-	For type defines and data structure defines
-
------------------------------------------------------------------------*/
+/* ---------------------------------------------------------------------
+ *
+ *	For type defines and data structure defines
+ *
+ * ---------------------------------------------------------------------
+ */
 #ifndef __DRV_TYPES_H__
 #define __DRV_TYPES_H__
 

index 0a1c631..0265214 100644
@@ -297,7 +297,8 @@ static u8 rtl8712_dl_fw(struct _adapter *padapter)
 
 		tmp8 = r8712_read8(padapter, 0x1025000A);
 		if (tmp8 & BIT(4)) /* When boot from EEPROM,
-				    & FW need more time to read EEPROM */
+				    * & FW need more time to read EEPROM
+				    */
 			i = 60;
 		else			/* boot from EFUSE */
 			i = 30;

@@ -331,7 +332,8 @@ uint rtl8712_hal_init(struct _adapter *padapter)
 		    r8712_read32(padapter, RCR));
 	val32 = r8712_read32(padapter, RCR);
 	r8712_write32(padapter, RCR, (val32 | BIT(26))); /* Enable RX TCP
-							    Checksum offload */
+							  * Checksum offload
+							  */
 	netdev_info(padapter->pnetdev, "2 RCR=0x%x\n",
 		    r8712_read32(padapter, RCR));
 	val32 = r8712_read32(padapter, RCR);

@@ -345,7 +347,8 @@ uint rtl8712_hal_init(struct _adapter *padapter)
 	r8712_write8(padapter, 0x102500BD, r8712_read8(padapter, 0x102500BD) |
 	       BIT(7)); /* enable usb rx aggregation */
 	r8712_write8(padapter, 0x102500D9, 1); /* TH=1 => means that invalidate
-						*  usb rx aggregation */
+						*  usb rx aggregation
+						*/
 	r8712_write8(padapter, 0x1025FE5B, 0x04); /* 1.7ms/4 */
 	/* Fix the RX FIFO issue(USB error) */
 	r8712_write8(padapter, 0x1025fe5C, r8712_read8(padapter, 0x1025fe5C)

@@ -366,7 +369,8 @@ uint rtl8712_hal_deinit(struct _adapter *padapter)
 	r8712_write8(padapter, SYS_FUNC_EN+1, 0x70);
 	r8712_write8(padapter, PMC_FSM, 0x06);  /* Enable Loader Data Keep */
 	r8712_write8(padapter, SYS_ISO_CTRL, 0xF9); /* Isolation signals from
-						     * CORE, PLL */
+						     * CORE, PLL
+						     */
 	r8712_write8(padapter, SYS_ISO_CTRL+1, 0xe8); /* Enable EFUSE 1.2V */
 	r8712_write8(padapter, AFE_PLL_CTRL, 0x00); /* Disable AFE PLL. */
 	r8712_write8(padapter, LDOA15_CTRL, 0x54);  /* Disable A15V */

index c5527c1..261a973 100644
@@ -107,9 +107,10 @@ u8 *r8712_set_ie(u8 *pbuf, sint index, uint len, u8 *source, uint *frlen)
 	return pbuf + len + 2;
 }
 
-/*----------------------------------------------------------------------------
-index: the information element id index, limit is the limit for search
------------------------------------------------------------------------------*/
+/* ---------------------------------------------------------------------------
+ * index: the information element id index, limit is the limit for search
+ * ---------------------------------------------------------------------------
+ */
 u8 *r8712_get_ie(u8 *pbuf, sint index, sint *len, sint limit)
 {
 	sint tmp, i;

index 6e813a9..d374824c 100644
@@ -120,12 +120,13 @@ struct ieee_param {
 
 #define IEEE80211_DATA_LEN		2304
 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
-   6.2.1.1.2.
-
-   The figure in section 7.1.2 suggests a body size of up to 2312
-   bytes is allowed, which is a bit confusing, I suspect this
-   represents the 2304 bytes of real data, plus a possible 8 bytes of
-   WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+ * 6.2.1.1.2.
+ *
+ * The figure in section 7.1.2 suggests a body size of up to 2312
+ * bytes is allowed, which is a bit confusing, I suspect this
+ * represents the 2304 bytes of real data, plus a possible 8 bytes of
+ * WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro)
+ */
 
 #define IEEE80211_HLEN			30
 #define IEEE80211_FRAME_LEN		(IEEE80211_DATA_LEN + IEEE80211_HLEN)

@@ -405,7 +406,8 @@ struct ieee80211_snap_hdr {
 
 /* NOTE: This data is for statistical purposes; not all hardware provides this
  *       information for frames received.  Not setting these will not cause
- *       any adverse affects. */
+ *       any adverse affects.
+ */
 struct ieee80211_rx_stats {
 	s8 rssi;
 	u8 signal;

@@ -420,7 +422,8 @@ struct ieee80211_rx_stats {
 /* IEEE 802.11 requires that STA supports concurrent reception of at least
  * three fragmented frames. This define can be increased to support more
  * concurrent frames, but it should be noted that each entry can consume about
- * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
+ * 2 kB of RAM and increasing cache size will slow down frame reassembly.
+ */
 #define IEEE80211_FRAG_CACHE_LEN 4
 
 struct ieee80211_frag_entry {

@@ -510,19 +513,19 @@ struct ieee80211_security {
 } __packed;
 
 /*
-
- 802.11 data frame from AP
-
-      ,-------------------------------------------------------------------.
-Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
-      |------|------|---------|---------|---------|------|---------|------|
-Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
-      |      | tion | (BSSID) |         |         | ence |  data   |      |
-      `-------------------------------------------------------------------'
-
-Total: 28-2340 bytes
-
-*/
+ *
+ * 802.11 data frame from AP
+ *
+ *       ,-------------------------------------------------------------------.
+ * Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
+ *       |------|------|---------|---------|---------|------|---------|------|
+ * Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
+ *       |      | tion | (BSSID) |         |         | ence |  data   |      |
+ *       `-------------------------------------------------------------------'
+ *
+ * Total: 28-2340 bytes
+ *
+ */
 
 struct ieee80211_header_data {
 	u16 frame_ctl;

@@ -628,7 +631,8 @@ struct ieee80211_txb {
 /* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
  * only use 8, and then use extended rates for the remaining supported
  * rates.  Other APs, however, stick all of their supported rates on the
- * main rates information element... */
+ * main rates information element...
+ */
 #define MAX_RATES_LENGTH                  ((u8)12)
 #define MAX_RATES_EX_LENGTH               ((u8)16)
 #define MAX_NETWORK_COUNT                  128

index 8c5a475..6d253bf 100644
@@ -122,7 +122,8 @@ void r8712_os_indicate_disconnect(struct _adapter *adapter)
 			    r8712_use_tkipkey_handler,
 			    (unsigned long)adapter);
 		/* Restore the PMK information to securitypriv structure
-		 * for the following connection. */
+		 * for the following connection.
+		 */
 		memcpy(&adapter->securitypriv.PMKIDList[0],
 			&backupPMKIDList[0],
 			sizeof(struct RT_PMKID_LIST) * NUM_PMKID_CACHE);

index 5d551a1..f34a963 100644
@@ -366,7 +366,8 @@ static void enable_video_mode(struct _adapter *padapter, int cbw40_value)
 
 	if (cbw40_value) {
 		/* if the driver supports the 40M bandwidth,
-		 * we can enable the bit 9.*/
+		 * we can enable the bit 9.
+		 */
 		intcmd |= 0x200;
 	}
 	r8712_fw_cmd(padapter, intcmd);

index 4201ce7..2f5460d 100644
@@ -127,7 +127,8 @@ void r8712_recv_indicatepkt(struct _adapter *padapter,
 	skb->protocol = eth_type_trans(skb, padapter->pnetdev);
 	netif_rx(skb);
 	precv_frame->u.hdr.pkt = NULL; /* pointers to NULL before
-					* r8712_free_recvframe() */
+					* r8712_free_recvframe()
+					*/
 	r8712_free_recvframe(precv_frame, pfree_recv_queue);
 	return;
 _recv_indicatepkt_drop:

index 007f0a3..b755ab4 100644
@@ -64,10 +64,12 @@ static void check_hw_pbc(struct _adapter *padapter)
 		return;
 	if (tmp1byte&HAL_8192S_HW_GPIO_WPS_BIT) {
 		/* Here we only set bPbcPressed to true
-		 * After trigger PBC, the variable will be set to false */
+		 * After trigger PBC, the variable will be set to false
+		 */
 		DBG_8712("CheckPbcGPIO - PBC is pressed !!!!\n");
 		/* 0 is the default value and it means the application monitors
-		 * the HW PBC doesn't provide its pid to driver. */
+		 * the HW PBC doesn't provide its pid to driver.
+		 */
 		if (padapter->pid == 0)
 			return;
 		kill_pid(find_vpid(padapter->pid), SIGUSR1, 1);

@@ -76,7 +78,8 @@ static void check_hw_pbc(struct _adapter *padapter)
 
 /* query rx phy status from fw.
  * Adhoc mode: beacon.
- * Infrastructure mode: beacon , data. */
+ * Infrastructure mode: beacon , data.
+ */
 static void query_fw_rx_phy_status(struct _adapter *padapter)
 {
 	u32 val32 = 0;

@@ -257,7 +260,8 @@ static struct cmd_obj *cmd_hdl_filter(struct _adapter *padapter,
 		/* Before set JoinBss_CMD to FW, driver must ensure FW is in
 		 * PS_MODE_ACTIVE. Directly write rpwm to radio on and assign
 		 * new pwr_mode to Driver, instead of use workitem to change
-		 * state. */
+		 * state.
+		 */
 		if (padapter->pwrctrlpriv.pwr_mode > PS_MODE_ACTIVE) {
 			padapter->pwrctrlpriv.pwr_mode = PS_MODE_ACTIVE;
 			_enter_pwrlock(&(padapter->pwrctrlpriv.lock));

index 8dffe10..b7dda90 100644
@@ -21,7 +21,8 @@
 #define __RTL8712_CMDCTRL_BITDEF_H__
 
 /*
- * 2. Command Control Registers	 (Offset: 0x0040 - 0x004F)*/
+ * 2. Command Control Registers	 (Offset: 0x0040 - 0x004F)
+ */
 /*--------------------------------------------------------------------------*/
 /*       8192S (CMD) command register bits	(Offset 0x40, 16 bits)*/
 /*--------------------------------------------------------------------------*/

index 138ea45..44c9060 100644
@@ -64,7 +64,8 @@
 
 #define		GPIOMUX_EN	BIT(3)	/* When this bit is set to "1",
 					 * GPIO PINs will switch to MAC
-					 * GPIO Function*/
+					 * GPIO Function
+					 */
 #define		GPIOSEL_GPIO	0	/* UART or JTAG or pure GPIO*/
 #define		GPIOSEL_PHYDBG	1	/* PHYDBG*/
 #define		GPIOSEL_BT	2	/* BT_coex*/

index 4c51fa3..57d5d2d 100644
@@ -68,12 +68,14 @@ struct fw_priv {   /*8-bytes alignment required*/
 	unsigned char signature_0;  /*0x12: CE product, 0x92: IT product*/
 	unsigned char signature_1;  /*0x87: CE product, 0x81: IT product*/
 	unsigned char hci_sel; /*0x81: PCI-AP, 01:PCIe, 02: 92S-U, 0x82: USB-AP,
-			    * 0x12: 72S-U, 03:SDIO*/
+			    * 0x12: 72S-U, 03:SDIO
+			    */
 	unsigned char chip_version; /*the same value as register value*/
 	unsigned char customer_ID_0; /*customer  ID low byte*/
 	unsigned char customer_ID_1; /*customer  ID high byte*/
 	unsigned char rf_config;  /*0x11:  1T1R, 0x12: 1T2R, 0x92: 1T2R turbo,
-			     * 0x22: 2T2R*/
+			     * 0x22: 2T2R
+			     */
 	unsigned char usb_ep_num;  /* 4: 4EP, 6: 6EP, 11: 11EP*/
 	/*--- long word 1 ----*/
 	unsigned char regulatory_class_0; /*regulatory class bit map 0*/

@@ -97,7 +99,8 @@ struct fw_priv {   /*8-bytes alignment required*/
 	unsigned char qos_en;    /*1: QoS enable*/
 	unsigned char bw_40MHz_en;   /*1: 40MHz BW enable*/
 	unsigned char AMSDU2AMPDU_en;   /*1: 4181 convert AMSDU to AMPDU,
-				   * 0: disable*/
+				   * 0: disable
+				   */
 	unsigned char AMPDU_en;   /*1: 11n AMPDU enable*/
 	unsigned char rate_control_offload; /*1: FW offloads,0: driver handles*/
 	unsigned char aggregation_offload;  /*1: FW offloads,0: driver handles*/

@@ -125,8 +128,9 @@ struct fw_priv {   /*8-bytes alignment required*/
 
 struct fw_hdr {/*8-byte alignment required*/
 	unsigned short	signature;
-	unsigned short	version;	/*0x8000 ~ 0x8FFF for FPGA version,
-					 *0x0000 ~ 0x7FFF for ASIC version,*/
+	unsigned short	version;	/* 0x8000 ~ 0x8FFF for FPGA version,
+					 * 0x0000 ~ 0x7FFF for ASIC version,
+					 */
 	unsigned int		dmem_size;    /*define the size of boot loader*/
 	unsigned int		img_IMEM_size; /*define the size of FW in IMEM*/
 	unsigned int		img_SRAM_size; /*define the size of FW in SRAM*/