guile, mailx, gcc, opensp, gstreamer1.0-libav, libunwind: disable thumb where it fails for qemuarm
PATCH 1/1 guile, mailx, gcc, opensp, gstreamer1.0-libav, libunwind: disable thumb where it fails for qemuarm
--- meta/recipes-devtools/gcc/gcc_4.9.bb | 23 ++++++++++++++++++++++ meta/recipes-devtools/guile/guile_2.0.11.bb | 19 ++++++++++++++++++ meta/recipes-devtools/opensp/opensp_1.5.2.bb | 5 +++++ meta/recipes-extended/mailx/mailx_12.5.bb | 4 ++++ .../gstreamer/gstreamer1.0-libav_1.4.5.bb | 9 +++++++++ meta/recipes-support/libunwind/libunwind_1.1.bb | 6 ++++++ 6 files changed, 66 insertions(+)
meta/recipes-devtools/gcc/gcc_4.9.bb +23 -0
@@ -4,4 +4,27 @@ require gcc-target.inc # Building with thumb enabled on armv4t fails with # | gcc-4.8.1-r0/gcc-4.8.1/gcc/cp/decl.c:7438:(.text.unlikely+0x2fa): relocation truncated to fit: R_ARM_THM_CALL against symbol `fancy_abort(char const*, int, char const*)' defined in .glue_7 section in linker stubs # | gcc-4.8.1-r0/gcc-4.8.1/gcc/cp/decl.c:7442:(.text.unlikely+0x318): additional relocation overflows omitted from the output +# and on armv5te (qemuarm) it fails with ICE: +# | /home/jenkins/oe/world/shr-core/tmp-glibc/work-shared/gcc-4.9.2-r0/gcc-4.9.2/gcc/cse.c:5949:1: error: unable to generate reloads for: +# | } +# | ^ +# | (jump_insn 3586 13095 8302 510 (parallel [ +# | (set (pc) +# | (if_then_else (lt (plus:SI (reg:SI 4908 [3615]) +# | (reg:SI 4876)) +# | (const_int 0 [0])) +# | (label_ref 3590) +# | (pc))) +# | (set (reg:SI 3252) +# | (plus:SI (reg:SI 4908 [3615]) +# | (reg:SI 4876))) +# | (clobber (mem/c:SI (reg:SI 5320) [107 %sfp+-208 S4 A32])) +# | ]) /home/jenkins/oe/world/shr-core/tmp-glibc/work-shared/gcc-4.9.2-r0/gcc-4.9.2/gcc/cse.c:5174 225 {*addsi3_cbranch} +# | (expr_list:REG_DEAD (reg:SI 5320) +# | (expr_list:REG_DEAD (reg:SI 4908 [3615]) +# | (expr_list:REG_DEAD (reg:SI 4876) +# | (int_list:REG_BR_PROB 2100 (nil))))) +# | -> 3590) +# | /home/jenkins/oe/world/shr-core/tmp-glibc/work-shared/gcc-4.9.2-r0/gcc-4.9.2/gcc/cse.c:5949:1: internal compiler error: in curr_insn_transform, at lra-constraints.c:3362 ARM_INSTRUCTION_SET_armv4 = "arm" +ARM_INSTRUCTION_SET_armv5 = "arm"
meta/recipes-devtools/guile/guile_2.0.11.bb +19 -0
@@ -104,3 +104,22 @@ guile_sstate_postinst() { find ${STAGING_DIR_TARGET}/${libdir}/guile/2.0/ccache -type f | xargs touch fi } + +# Fails to build for qemuarm: +# | {standard input}: Assembler messages: +# | {standard input}:16707: Error: instruction not supported in Thumb16 mode -- `adds r0,r2,r4' +# | {standard input}:16707: Error: lo register required -- `str r0,[r8]' +# | {standard input}:18192: Error: instruction not supported in Thumb16 mode -- `subs r0,r2,r4' +# | {standard input}:18192: Error: lo register required -- `str r0,[r8]' +# | {standard input}:18279: Error: selected processor does not support Thumb mode `smull r3,r6,r2,r6' +# | {standard input}:34878: Error: instruction not supported in Thumb16 mode -- `subs r0,r2,r4' +# | {standard input}:34878: Error: lo register required -- `str r0,[r8]' +# | {standard input}:35148: Error: selected processor does not support Thumb mode `smull r3,r5,r2,r5' +# | {standard input}:35241: Error: instruction not supported in Thumb16 mode -- `adds r0,r2,r4' +# | {standard input}:35241: Error: lo register required -- `str r0,[r8]' +# | {standard input}:16707: Error: branch out of range +# | {standard input}:18192: Error: branch out of range +# | {standard input}:34878: Error: branch out of range +# | {standard input}:35241: Error: branch out of range +# | make[3]: *** [libguile_2.0_la-vm.lo] Error 1 +ARM_INSTRUCTION_SET = "arm"
meta/recipes-devtools/opensp/opensp_1.5.2.bb +5 -0
@@ -53,3 +53,8 @@ do_install_append_class-native() { FILES_${PN} += "${datadir}/OpenSP/" BBCLASSEXTEND = "native" + +# Fails to build with thumb-1 (qemuarm) +# | {standard input}: Assembler messages: +# | {standard input}: Error: unaligned opcodes detected in executable segment +ARM_INSTRUCTION_SET = "arm"
meta/recipes-extended/mailx/mailx_12.5.bb +4 -0
@@ -34,3 +34,7 @@ EXTRA_OEMAKE = "SENDMAIL=${sbindir}/sendmail" # fio.c:56:17: fatal error: ssl.h: No such file or directory # #include <ssl.h> PARALLEL_MAKE = "" + +# Causes gcc to get stuck and eat all available memory in qemuarm builds +# jenkins 20755 99.9 6.1 5155676 5041932 ? R 11:30 38:51 /home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/4.9.2/cc1 -quiet -I /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/mailx/12.5-r2/heirloom-mailx-12.5/EXT -isysroot /home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm -D _BSD_SOURCE -D DEBIAN -D _GNU_SOURCE -D MAILRC="/etc/nail.rc" -D MAILSPOOL="/var/mail" -D SENDMAIL="/usr/sbin/sendmail" -D HAVE_IPv6_FUNCS send.c -quiet -dumpbase send.c -march=armv5te -mthumb -mthumb-interwork -mtls-dialect=gnu -auxbase send -g -O2 -feliminate-unused-debug-types -o - +ARM_INSTRUCTION_SET = "arm"
meta/recipes-multimedia/gstreamer/gstreamer1.0-libav_1.4.5.bb +9 -0
@@ -24,3 +24,12 @@ LIBAV_EXTRA_CONFIGURE_COMMON_ARG = "--target-os=linux \ S = "${WORKDIR}/gst-libav-${PV}" +# Fails to build with thumb-1 (qemuarm) +#| {standard input}: Assembler messages: +#| {standard input}:5126: Error: instruction not supported in Thumb16 mode -- `adds r3,r1,r0,lsr#31' +#| {standard input}:5127: Error: selected processor does not support Thumb mode `itet ne' +#| {standard input}:5128: Error: Thumb does not support conditional execution +#| {standard input}:5129: Error: Thumb does not support conditional execution +#| {standard input}:5130: Error: Thumb does not support conditional execution +#| make[5]: *** [libavresample/audio_mix.o] Error 1 +ARM_INSTRUCTION_SET = "arm"
meta/recipes-support/libunwind/libunwind_1.1.bb +6 -0
@@ -9,3 +9,9 @@ SRC_URI += "\ SRC_URI[md5sum] = "fb4ea2f6fbbe45bf032cd36e586883ce" SRC_URI[sha256sum] = "9dfe0fcae2a866de9d3942c66995e4b460230446887dbdab302d41a8aee8d09a" + +# Fails to build with thumb-1 (qemuarm) +#| {standard input}: Assembler messages: +#| {standard input}:84: Error: lo register required -- `ldmia r2,{r4-r12,lr}' +#| make[2]: *** [arm/Gresume.lo] Error 1 +ARM_INSTRUCTION_SET = "arm"
Signature · 1 line
2.4.0
Quoted 9 lines · Martin Jansa
Signed-off-by Martin Jansa <[email protected]>--- meta/recipes-devtools/gcc/gcc_4.9.bb | 23 ++++++++++++++++++++++ meta/recipes-devtools/guile/guile_2.0.11.bb | 19 ++++++++++++++++++ meta/recipes-devtools/opensp/opensp_1.5.2.bb | 5 +++++ meta/recipes-extended/mailx/mailx_12.5.bb | 4 ++++ .../gstreamer/gstreamer1.0-libav_1.4.5.bb | 9 +++++++++ meta/recipes-support/libunwind/libunwind_1.1.bb | 6 ++++++ 6 files changed, 66 insertions(+)
As mentioned on the bug relating to this, I think we should create an include file which sets the values as needed for these recipes rather than adding the quite long comments to the recipes themselves. This is similar to what we do where we know there are security flags issues for example.
Cheers,
Richard
Quoted 11 lines · Richard Purdie
Quoted 9 lines · Martin Jansa
Signed-off-by Martin Jansa <[email protected]>--- meta/recipes-devtools/gcc/gcc_4.9.bb | 23 ++++++++++++++++++++++ meta/recipes-devtools/guile/guile_2.0.11.bb | 19 ++++++++++++++++++ meta/recipes-devtools/opensp/opensp_1.5.2.bb | 5 +++++ meta/recipes-extended/mailx/mailx_12.5.bb | 4 ++++ .../gstreamer/gstreamer1.0-libav_1.4.5.bb | 9 +++++++++ meta/recipes-support/libunwind/libunwind_1.1.bb | 6 ++++++ 6 files changed, 66 insertions(+)
Quoted 5 lines
As mentioned on the bug relating to this, I think we should create an include file which sets the values as needed for these recipes rather than adding the quite long comments to the recipes themselves. This is similar to what we do where we know there are security flags issues for example.
Is it OK, to put overrides for recipes in other layers to .inc file in oe-core? If yes then I agree and will convert this into .inc file in conf/machine/include/ (included by default for thumb1 machine tunes)
Signature · 1 line
Martin 'JaMa' Jansa jabber: [email protected]
PATCH 1/1 webkitgtk, gcr, libsecret: force ARM mode
* gcr, libsecret are new since switch to gcc 5.2
* webkitgtk is old but it was removed while migrating from webkit-gtk to webkitgtl (like REQUIRED_DISTRO_FEATURES were) :/
--- meta/recipes-gnome/gcr/gcr_3.16.0.bb | 3 +++ meta/recipes-gnome/libsecret/libsecret_0.18.2.bb | 3 +++ meta/recipes-sato/webkit/webkitgtk_2.8.5.bb | 2 ++ 3 files changed, 8 insertions(+)
meta/recipes-gnome/gcr/gcr_3.16.0.bb +3 -0
@@ -16,3 +16,6 @@ FILES_${PN} += " \ ${datadir}/dbus-1 \ ${datadir}/gcr-3 \ " + +# http://errors.yoctoproject.org/Errors/Details/20229/ +ARM_INSTRUCTION_SET = "arm"
meta/recipes-gnome/libsecret/libsecret_0.18.2.bb +3 -0
@@ -10,3 +10,6 @@ EXTRA_OECONF += "--disable-manpages" SRC_URI[archive.md5sum] = "23cdf8267d11a26f88f0dbec1e2022ad" SRC_URI[archive.sha256sum] = "12fd288b012e1b2b1b54d586cd4c6507885715534644b4534b7ef7d7079ba443" + +# http://errors.yoctoproject.org/Errors/Details/20228/ +ARM_INSTRUCTION_SET = "arm"
meta/recipes-sato/webkit/webkitgtk_2.8.5.bb +2 -0
@@ -70,3 +70,5 @@ FILES_${PN} += "${libdir}/webkit2gtk-4.0/injected-bundle/libwebkit2gtkinjectedbu FILES_${PN}-dbg += "${libdir}/webkit2gtk-4.0/injected-bundle/.debug/libwebkit2gtkinjectedbundle.so" FILES_${PN}-dbg += "${libdir}/webkitgtk/webkit2gtk-4.0/.debug/*" +# http://errors.yoctoproject.org/Errors/Details/20370/ +ARM_INSTRUCTION_SET = "arm"
Signature · 1 line
2.6.0
Re: [PATCH] webkitgtk, gcr, libsecret: force ARM mode
Quoted 13 lines · Martin Jansa
* gcr, libsecret are new since switch to gcc 5.2
* webkitgtk is old but it was removed while migrating from webkit-gtk to webkitgtl (likeREQUIRED_DISTRO_FEATURESwere) :/Signed-off-by Martin Jansa <[email protected]>---
meta/recipes-sato/webkit/webkitgtk_2.8.5.bb +0
-0
meta/recipes-sato/webkit/webkitgtk_2.8.5.bb FILES_${PN} += "${libdir}/webkit2gtk-4.0/injected-bundle/libwebkit2gtkinjectedbu · line 74
Quoted 5 lines
meta/recipes-sato/webkit/webkitgtk_2.8.5.bb +2
-0@@ -70,3 +70,5 @@ FILES_${PN} += "${libdir}/webkit2gtk-4.0/injected-bundle/libwebkit2gtkinjectedbu FILES_${PN}-dbg += "${libdir}/webkit2gtk-4.0/injected-bundle/.debug/libwebkit2gtkinjectedbundle.so" FILES_${PN}-dbg += "${libdir}/webkitgtk/webkit2gtk-4.0/.debug/*" +# http://errors.yoctoproject.org/Errors/Details/20370/ +ARM_INSTRUCTION_SET = "arm"
I tried to build webkitgtk using current master of poky for machine qemuarm and it built fine:
Build Configuration:
BB_VERSION = "1.28.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Debian-8.1" TARGET_SYS = "arm-poky-linux-gnueabi" MACHINE = "qemuarm" DISTRO = "poky" DISTRO_VERSION = "2.0" TUNE_FEATURES = "arm armv5 thumb dsp" TARGET_FPU = "soft"
meta
meta-yocto
meta-yocto-bsp = "master:ceeb52a2544045fe8432e36307a321f6e934de49"
Can you tell me how to reproduce this failure? Also, what the ARM_INSTRUCTION_SET = "arm" line does? Thanks.
Re: [PATCH] webkitgtk, gcr, libsecret: force ARM mode
Did you enable thumb in that build? It's not enabled by default.
ARM_INSTRUCTION_SET is for recipes to use arm when distro selects thumb by default.
Quoted 53 lines · On Sat, Oct 10, 2015, 14:13 Carlos Alberto Lopez Perez <[email protected]>…
Review
Quoted 8 lines · Martin Jansa
* gcr, libsecret are new since switch to gcc 5.2
* webkitgtk is old but it was removed while migrating from webkit-gtk to webkitgtl (likeREQUIRED_DISTRO_FEATURESwere) :/Signed-off-by Martin Jansa <[email protected]>---
(quoted diff) +0
-0b/meta/recipes-sato/webkit/webkitgtk_2.8.5.bb
meta/recipes-sato/webkit/webkitgtk_2.8.5.bb FILES_${PN} +=
Quoted 4 lines
index f14c868..e29666a 100644
meta/recipes-sato/webkit/webkitgtk_2.8.5.bb +0
-0@@ -70,3 +70,5 @@ FILES_${PN} +="${libdir}/webkit2gtk-4.0/injected-bundle/libwebkit2gtkinjectedbu
meta/recipes-sato/webkit/webkitgtk_2.8.5.bb FILES_${PN} += · line 70
Quoted 1 line
meta/recipes-sato/webkit/webkitgtk_2.8.5.bb +0
-0FILES_${PN}-dbg +="${libdir}/webkit2gtk-4.0/injected-bundle/.debug/libwebkit2gtkinjectedbundle.so"
meta/recipes-sato/webkit/webkitgtk_2.8.5.bb FILES_${PN} += "${libdir}/webkit2gtk-4.0/injected-bundle/libwebkit2gtkinjectedbu · line 74
Quoted 5 lines
meta/recipes-sato/webkit/webkitgtk_2.8.5.bb +2
-0FILES_${PN}-dbg += "${libdir}/webkitgtk/webkit2gtk-4.0/.debug/*" +# http://errors.yoctoproject.org/Errors/Details/20370/ +ARM_INSTRUCTION_SET = "arm"I tried to build webkitgtk using current master of poky for machine qemuarm and it built fine:
Build Configuration:
BB_VERSION = "1.28.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Debian-8.1" TARGET_SYS = "arm-poky-linux-gnueabi" MACHINE = "qemuarm" DISTRO = "poky" DISTRO_VERSION = "2.0" TUNE_FEATURES = "arm armv5 thumb dsp" TARGET_FPU = "soft"meta
meta-yocto
meta-yocto-bsp = "master:ceeb52a2544045fe8432e36307a321f6e934de49"Can you tell me how to reproduce this failure? Also, what the
ARM_INSTRUCTION_SET= "arm" line does? Thanks.--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core
Re: [PATCH] webkitgtk, gcr, libsecret: force ARM mode
Quoted 4 lines · Martin Jansa
Did you enable thumb in that build? It's not enabled by default.
ARM_INSTRUCTION_SETis for recipes to use arm when distro selects thumb by default.
I assumed it was enabled by default if it was listed on the list printed on TUNE_FEATURES when starting bitbake. Seems not.
I manually enabled it on the recipe of webkitgtk+ by setting 'ARM_INSTRUCTION_SET = "thumb"' and I was able to reproduce the build failure.
However, later I tried doing the same for a standard armv7a machine and it built fine.
qemuarm is arvm6 with thumb1, and any armv7 or newer machine will prefer thumb2 instead. The compiler would automatically use thumb2 when enabling -mthumb on a armv7 or newer march.
So, it built fine with -march=armv7-a -mthumb
Given that most people building webkitgtk+ will use armv7 or newer, I don't think disabling the possibility of building webkitgtk+ with thumb (thumb2) unconditionally is a good idea.
I also tested to build gcr and libsecret. Both build also fine with -mthumb on armv7.
So, could we set ARM_INSTRUCTION_SET=arm only for armv6 or older machines in this 3 recipes?
Re: [PATCH] webkitgtk, gcr, libsecret: force ARM mode
Quoted 13 lines · Carlos Alberto Lopez Perez
Quoted 4 lines · Martin Jansa
Did you enable thumb in that build? It's not enabled by default.
ARM_INSTRUCTION_SETis for recipes to use arm when distro selects thumb by default.I assumed it was enabled by default if it was listed on the list printed on
TUNE_FEATURESwhen starting bitbake. Seems not.I manually enabled it on the recipe of webkitgtk+ by setting '
ARM_INSTRUCTION_SET= "thumb"' and I was able to reproduce the build failure.
Quoted 8 lines
However, later I tried doing the same for a standard armv7a machine and it built fine.
qemuarm is arvm6 with thumb1, and any armv7 or newer machine will prefer thumb2 instead. The compiler would automatically use thumb2 when enabling -mthumb on a armv7 or newer march.
So, it built fine with -march=armv7-a -mthumb
that will use thumb2 ISA and its not same as thumb1 that Martin is seeing.
Quoted 11 lines
Given that most people building webkitgtk+ will use armv7 or newer, I don't think disabling the possibility of building webkitgtk+ with thumb (thumb2) unconditionally is a good idea.
I also tested to build gcr and libsecret. Both build also fine with -mthumb on armv7.
So, could we set ARM_INSTRUCTION_SET=arm only for armv6 or older machines in this 3 recipes?
I think that should be fine. Although we don't have a single check for this one needs to check for armv5 and armv4 and its family of sub-arches
Quoted 8 lines
--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core
Re: [PATCH] webkitgtk, gcr, libsecret: force ARM mode
In reply to Carlos Alberto Lopez PerezQuoted 26 lines · Carlos Alberto Lopez Perez
Quoted 4 lines · Martin Jansa
Did you enable thumb in that build? It's not enabled by default.
ARM_INSTRUCTION_SETis for recipes to use arm when distro selects thumb by default.I assumed it was enabled by default if it was listed on the list printed on
TUNE_FEATURESwhen starting bitbake. Seems not.I manually enabled it on the recipe of webkitgtk+ by setting '
ARM_INSTRUCTION_SET= "thumb"' and I was able to reproduce the build failure.However, later I tried doing the same for a standard armv7a machine and it built fine.
qemuarm is arvm6 with thumb1, and any armv7 or newer machine will prefer thumb2 instead. The compiler would automatically use thumb2 when enabling -mthumb on a armv7 or newer march.
So, it built fine with -march=armv7-a -mthumb
Given that most people building webkitgtk+ will use armv7 or newer, I don't think disabling the possibility of building webkitgtk+ with thumb (thumb2) unconditionally is a good idea.
Quoted 6 lines
I also tested to build gcr and libsecret. Both build also fine with -mthumb on armv7.
So, could we set ARM_INSTRUCTION_SET=arm only for armv6 or older machines in this 3 recipes?
Yes, that would be better, I'm still waiting for answer about other layers, see:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=7717#c6
In the meantime I'm using this to keep my world builds going.
Signature · 1 line
Martin 'JaMa' Jansa jabber: [email protected]
Re: [PATCH] webkitgtk, gcr, libsecret: force ARM mode
In reply to Carlos Alberto Lopez PerezQuoted 2 lines · Carlos Alberto Lopez Perez
So, could we set ARM_INSTRUCTION_SET=arm only for armv6 or older machines in this 3 recipes?
Indeed. Webkit has other issues on armv6 or older (JIT fails to build if you try to), so I believe the upstream developers test the builds only on v7 onwards nowadays, and don't actually support anything older.
Alex
Re: [PATCH] webkitgtk, gcr, libsecret: force ARM mode
Quoted 5 lines · Alexander Kanavin
Quoted 2 lines · Carlos Alberto Lopez Perez
So, could we set ARM_INSTRUCTION_SET=arm only for armv6 or older machines in this 3 recipes?
Quoted 7 lines
Indeed. Webkit has other issues on armv6 or older (JIT fails to build if you try to), so I believe the upstream developers test the builds only on v7 onwards nowadays, and don't actually support anything older.
Alex
Yes, that's true.
The buildbots we have continuously testing [1] only do it on i686, AMD64, ARMv7+ (traditional/arm and thumb2) and ARM64 (Aarch64) architectures.
Regards
-------
[1] https://build.webkit.org/builders
Re: [PATCH] webkitgtk, gcr, libsecret: force ARM mode
In reply to Carlos Alberto Lopez PerezQuoted 16 lines · Carlos Alberto Lopez Perez
Quoted 15 lines · Martin Jansa
* gcr, libsecret are new since switch to gcc 5.2
* webkitgtk is old but it was removed while migrating from webkit-gtk to webkitgtl (likeREQUIRED_DISTRO_FEATURESwere) :/Signed-off-by Martin Jansa <[email protected]>---
meta/recipes-sato/webkit/webkitgtk_2.8.5.bb +0
-0@@ -70,3 +70,5 @@ FILES_${PN} += "${libdir}/webkit2gtk-4.0/injected-bundle/libwebkit2gtkinjectedbu FILES_${PN}-dbg += "${libdir}/webkit2gtk-4.0/injected-bundle/.debug/libwebkit2gtkinjectedbundle.so" FILES_${PN}-dbg += "${libdir}/webkitgtk/webkit2gtk-4.0/.debug/*"
Quoted 6 lines
meta/recipes-sato/webkit/webkitgtk_2.8.5.bb FILES_${PN} += "${libdir}/webkit2gtk-4.0/injected-bundle/libwebkit2gtkinjectedbu · line 74
Quoted 3 lines
meta/recipes-sato/webkit/webkitgtk_2.8.5.bb +2
-0+# http://errors.yoctoproject.org/Errors/Details/20370/ +ARM_INSTRUCTION_SET = "arm"I tried to build webkitgtk using current master of poky for machine qemuarm and it built fine:
That is fine, however keep in mind that poky is one of many distributions using OE build framework.
there are many other which have different distribution policies and all of them use OE-Core and bitbake layers
as must. So when you make changes to OE-Core or bitbake the scope is a bit wider. Testing it on Poky alone
might not be sufficient. In this case the distro is choosing Thumb ISA as default for ARM architecture, you need
to have that policy set to reproduce this error.
Quoted 29 lines
Build Configuration:
BB_VERSION = "1.28.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Debian-8.1" TARGET_SYS = "arm-poky-linux-gnueabi" MACHINE = "qemuarm" DISTRO = "poky" DISTRO_VERSION = "2.0" TUNE_FEATURES = "arm armv5 thumb dsp" TARGET_FPU = "soft"meta
meta-yocto
meta-yocto-bsp = "master:ceeb52a2544045fe8432e36307a321f6e934de49"Can you tell me how to reproduce this failure? Also, what the
ARM_INSTRUCTION_SET= "arm" line does? Thanks.--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core
Re: [PATCH] webkitgtk, gcr, libsecret: force ARM mode
In reply to Martin JansaQuoted 1 line · Martin Jansa
* gcr, libsecret are new since switch to gcc 5.2
The problem with libsecret seems to be caused by its valgrind support code (which contains asm statements that only work in ARM state). I wonder if you can just turn WITH_VALGRIND off rather than forcing ARM-state for the whole library.
p.
Re: [PATCH] webkitgtk, gcr, libsecret: force ARM mode
Quoted 6 lines · Phil Blundell
Quoted 1 line
* gcr, libsecret are new since switch to gcc 5.2
The problem with libsecret seems to be caused by its valgrind support code (which contains asm statements that only work in ARM state). I wonder if you can just turn
WITH_VALGRINDoff rather than forcing ARM-state for the whole library.
That code is provided by valgrind itself so either fixing valgrind to write valid code or forcibly disabling the code in valgrind.h if thumb is enabled seems sensible and more likely to catch more problems in a single patch.
Ross
PATCH 1/1 guile, mailx, gcc, opensp, gstreamer1.0-libav, libunwind: disable thumb where it fails for qemuarm
In reply to Martin Jansa--- meta/recipes-devtools/gcc/gcc_4.9.bb | 5 ++--- meta/recipes-devtools/guile/guile_2.0.11.bb | 4 ++++ meta/recipes-devtools/opensp/opensp_1.5.2.bb | 4 ++++ meta/recipes-extended/mailx/mailx_12.5-5.bb | 5 +++++ meta/recipes-multimedia/gstreamer/gstreamer1.0-libav_1.4.5.bb | 3 +++ meta/recipes-support/libunwind/libunwind_1.1.bb | 4 ++++ 6 files changed, 22 insertions(+), 3 deletions(-)
meta/recipes-devtools/gcc/gcc_4.9.bb +2 -3
@@ -1,10 +1,9 @@ require recipes-devtools/gcc/gcc-${PV}.inc require gcc-target.inc -# Building with thumb enabled on armv4t fails with -# | gcc-4.8.1-r0/gcc-4.8.1/gcc/cp/decl.c:7438:(.text.unlikely+0x2fa): relocation truncated to fit: R_ARM_THM_CALL against symbol `fancy_abort(char const*, int, char const*)' defined in .glue_7 section in linker stubs -# | gcc-4.8.1-r0/gcc-4.8.1/gcc/cp/decl.c:7442:(.text.unlikely+0x318): additional relocation overflows omitted from the output +# http://errors.yoctoproject.org/Errors/Details/20497/ ARM_INSTRUCTION_SET_armv4 = "arm" +ARM_INSTRUCTION_SET_armv5 = "arm" BBCLASSEXTEND = "nativesdk"
meta/recipes-devtools/guile/guile_2.0.11.bb +4 -0
@@ -119,3 +119,7 @@ guile_sstate_postinst() { find ${STAGING_DIR_TARGET}/${libdir}/guile/2.0/ccache -type f | xargs touch fi } + +# http://errors.yoctoproject.org/Errors/Details/20491/ +ARM_INSTRUCTION_SET_armv4 = "arm" +ARM_INSTRUCTION_SET_armv5 = "arm"
meta/recipes-devtools/opensp/opensp_1.5.2.bb +4 -0
@@ -53,3 +53,7 @@ do_install_append_class-native() { FILES_${PN} += "${datadir}/OpenSP/" BBCLASSEXTEND = "native" + +# http://errors.yoctoproject.org/Errors/Details/20489/ +ARM_INSTRUCTION_SET_armv4 = "arm" +ARM_INSTRUCTION_SET_armv5 = "arm"
meta/recipes-extended/mailx/mailx_12.5-5.bb +5 -0
@@ -41,3 +41,8 @@ EXTRA_OEMAKE = "SENDMAIL=${sbindir}/sendmail IPv6=-DHAVE_IPv6_FUNCS PREFIX=/usr # fio.c:56:17: fatal error: ssl.h: No such file or directory # #include <ssl.h> PARALLEL_MAKE = "" + +# Causes gcc to get stuck and eat all available memory in qemuarm builds +# http://errors.yoctoproject.org/Errors/Details/20488/ +ARM_INSTRUCTION_SET_armv4 = "arm" +ARM_INSTRUCTION_SET_armv5 = "arm"
meta/recipes-multimedia/gstreamer/gstreamer1.0-libav_1.4.5.bb +3 -0
@@ -25,3 +25,6 @@ LIBAV_EXTRA_CONFIGURE_COMMON_ARG = "--target-os=linux \ S = "${WORKDIR}/gst-libav-${PV}" +# http://errors.yoctoproject.org/Errors/Details/20493/ +ARM_INSTRUCTION_SET_armv4 = "arm" +ARM_INSTRUCTION_SET_armv5 = "arm"
meta/recipes-support/libunwind/libunwind_1.1.bb +4 -0
@@ -10,3 +10,7 @@ SRC_URI += "\ SRC_URI[md5sum] = "fb4ea2f6fbbe45bf032cd36e586883ce" SRC_URI[sha256sum] = "9dfe0fcae2a866de9d3942c66995e4b460230446887dbdab302d41a8aee8d09a" + +# http://errors.yoctoproject.org/Errors/Details/20487/ +ARM_INSTRUCTION_SET_armv4 = "arm" +ARM_INSTRUCTION_SET_armv5 = "arm"
Signature · 1 line
2.6.1