Skip to contentSkip to conversation

ath3k: Add support of AR3012 0cf3:817b device

PATCH In review Dmitry Tunin 2 participants 2 messages Oct 16, 2015 – Oct 19, 2015

Subsystems (2)
Stable branch Bluetooth drivers
lore
Share & tools
lore

Dmitry Tunin

author
#0 lore raw

PATCH 1/1 ath3k: Add support of AR3012 0cf3:817b device

T: Bus=04 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=817b Rev=00.02
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

BugLink https://bugs.launchpad.net/bugs/1506615
Signed-off-by Dmitry Tunin <[email protected]>
Cc [email protected]
---
 drivers/bluetooth/ath3k.c | 2 ++
 drivers/bluetooth/btusb.c | 1 +
 2 files changed, 3 insertions(+)
drivers/bluetooth/ath3k.c +2 -0
index e527a3e..5515b5b 100644
@@ -104,6 +104,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x0CF3, 0x311F) },
 	{ USB_DEVICE(0x0cf3, 0x3121) },
 	{ USB_DEVICE(0x0CF3, 0x817a) },
+	{ USB_DEVICE(0x0CF3, 0x817b) },
 	{ USB_DEVICE(0x0cf3, 0xe003) },
 	{ USB_DEVICE(0x0CF3, 0xE004) },
 	{ USB_DEVICE(0x0CF3, 0xE005) },

@@ -164,6 +165,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x0cf3, 0x311F), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0CF3, 0x817b), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
drivers/bluetooth/btusb.c +1 -0
index 27830da..a884c5a 100644
@@ -206,6 +206,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x817b), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
Signature · 1 line
1.9.1
maintainer
#1 lore raw

Hi Dmitry,

Quoted 7 lines

T: Bus=04 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=817b Rev=00.02
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Quoted 8 lines
BugLink https://bugs.launchpad.net/bugs/1506615
Signed-off-by Dmitry Tunin <[email protected]>
Cc [email protected]

---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +

2 files changed, 3 insertions(+)

patch has been applied to bluetooth-next tree.

Regards

Marcel