arm: mx5: Add fuse supply enable in fsl_iim
Subsystems (2)
PATCH v3 1/1 arm: mx5: Add fuse supply enable in fsl_iim
Enable fuse supply before fuse programming and disable after.
Signed-off-by Sergey Alyoshin <[email protected]>
--- arch/arm/cpu/armv7/mx5/clock.c | 12 ++++++++++++ arch/arm/include/asm/arch-mx5/clock.h | 1 + arch/arm/include/asm/arch-mx5/crm_regs.h | 3 +++ drivers/misc/fsl_iim.c | 17 ++++++++++++++++- 4 files changed, 32 insertions(+), 1 deletion(-)
arch/arm/cpu/armv7/mx5/clock.c +12 -0
@@ -749,6 +749,18 @@ void enable_nfc_clk(unsigned char enable) MXC_CCM_CCGR5_EMI_ENFC(cg)); } +#ifdef CONFIG_FSL_IIM +void enable_efuse_prog_supply (bool enable) +{ +if (enable) +setbits_le32 (&mxc_ccm->cgpr, +MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE ); +else +clrbits_le32 (&mxc_ccm->cgpr, +MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE ); +} +#endif +/* Config main_bus_clock for periphs */ static int config_periph_clk (u32 ref,u32 freq) {
arch/arm/include/asm/arch-mx5/clock.h +1 -0
@@ -53,5 +53,6 @@ void enable_usboh3_clk(bool enable);void mxc_set_sata_internal_clock (void );int enable_i2c_clk (unsigned char enable,unsigned i2c_num);void enable_nfc_clk (unsigned char enable); +void enable_efuse_prog_supply (bool enable);#endif /* __ASM_ARCH_CLOCK_H */
arch/arm/include/asm/arch-mx5/crm_regs.h +3 -0
@@ -305,6 +305,9 @@ struct mxc_ccm_reg {/* Define the bits in register CCDR */ #define MXC_CCM_CCDR_IPU_HS_MASK (0x1 << 17) +/* Define the bits in register CGPR */ +#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE (1 << 4) +/* Define the bits in register CCGRx */ #define MXC_CCM_CCGR_CG_MASK 0x3#define MXC_CCM_CCGR_CG_OFF 0x0
drivers/misc/fsl_iim.c +16 -1
@@ -16,6 +16,9 @@#ifndef CONFIG_MPC512X #include <asm/arch/imx-regs.h> #endif +#if defined(CONFIG_MX51 ) || defined(CONFIG_MX53 ) +#include <asm/arch/clock.h> +#endif /* FSL IIM-specific constants */ #define STAT_BUSY 0x80
@@ -93,6 +96,14 @@ struct fsl_iim { } bank[8 ]; }; +#if !defined(CONFIG_MX51 ) && !defined(CONFIG_MX53 ) +#define enable_efuse_prog_supply (enable) +#endif +static void enable_fuse_prog (bool enable) +{ +enable_efuse_prog_supply (enable); +} +static int prepare_access (struct fsl_iim **regs,u32 bank,u32 word,int assert,const char *caller) {
@@ -237,12 +248,16 @@ int fuse_prog(u32 bank, u32 word, u32 val)if (ret)return ret; +enable_fuse_prog (1 );for (bit =0 ; val; bit++, val >>=1 )if (val &0x01 ) { ret =prog_bit (regs, bank, word, bit); -if (ret) +if (ret) { +enable_fuse_prog (0 );return ret; + } } +enable_fuse_prog (0 );return 0 ; }
Signature · 1 line
1.7.10.4
PATCH v3 1/1 arm: mx5: Add fuse supply enable in fsl_iim
Dear Sergey Alyoshin,
On Tuesday, December 17, 2013 3:51:00 PM, Sergey Alyoshin wrote:
[...]
drivers/misc/fsl_iim.c struct fsl_iim { · line 106
Quoted 8 lines
drivers/misc/fsl_iim.c +8
-0+#if !defined(CONFIG_MX51 ) && !defined(CONFIG_MX53 ) +#define enable_efuse_prog_supply (enable) +#endif +static void enable_fuse_prog (bool enable) +{ +enable_efuse_prog_supply (enable); +} +
Er, this is like in v2. See my comment here for v2.
Best regards,
Beno?t