Skip to contentSkip to conversation

Patch "mtd: nand: sunxi: fix OOB handling in ->write_xxx() functions" has been added to the 4.2-stable tree

PATCH [email protected] 1 participant 1 message Oct 17, 2015

Subsystems (4)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

    mtd: nand: sunxi: fix OOB handling in ->write_xxx() functions

to the 4.2-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
mtd-nand-sunxi-fix-oob-handling-in-write_xxx-functions.patch
and it can be found in the queue-4.2 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 03a0e8a7c5ea29b5c4e72dfd64900b47a8fb6f2d Mon Sep 17 00:00:00 2001

From: Boris BREZILLON <[email protected]>
Date: Mon, 14 Sep 2015 10:41:03 +0200
Subject: mtd: nand: sunxi: fix OOB handling in ->write_xxx() functions

From: Boris BREZILLON <[email protected]>

commit 03a0e8a7c5ea29b5c4e72dfd64900b47a8fb6f2d upstream.

The USER_DATA register cannot be accessed using byte accessors on A13 SoCs, thus triggering a bug when using memcpy_toio on this register. Declare an helper macros to convert an OOB buffer into a suitable USER_DATA value and vice-versa.

This patch also fixes an error in the oob_required logic (some OOB data are not written even if the user required it) by removing the oob_required condition, which is perfectly valid since the core already fill ->oob_poi with FFs when oob_required is false.

Fixes 1fef62c1423b ("mtd: nand: add sunxi NAND flash controller support")
---
 drivers/mtd/nand/sunxi_nand.c |   26 +++++++++-----------------
 1 file changed, 9 insertions(+), 17 deletions(-)
drivers/mtd/nand/sunxi_nand.c +9 -17
@@ -138,6 +138,10 @@
 #define NFC_ECC_MODE		GENMASK(15, 12)
 #define NFC_RANDOM_SEED		GENMASK(30, 16)
 
+/* NFC_USER_DATA helper macros */
+#define NFC_BUF_TO_USER_DATA(buf)	((buf)[0] | ((buf)[1] << 8) | \
+					((buf)[2] << 16) | ((buf)[3] << 24))
+
 #define NFC_DEFAULT_TIMEOUT_MS	1000
 
 #define NFC_SRAM_SIZE		1024
@@ -632,15 +636,9 @@ static int sunxi_nfc_hw_ecc_write_page(s
 		offset = layout->eccpos[i * ecc->bytes] - 4 + mtd->writesize;
 
 		/* Fill OOB data in */
-		if (oob_required) {
-			tmp = 0xffffffff;
-			memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp,
-				    4);
-		} else {
-			memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE,
-				    chip->oob_poi + offset - mtd->writesize,
-				    4);
-		}
+		writel(NFC_BUF_TO_USER_DATA(chip->oob_poi +
+					    layout->oobfree[i].offset),
+		       nfc->regs + NFC_REG_USER_DATA_BASE);
 
 		chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1);
 
@@ -770,14 +768,8 @@ static int sunxi_nfc_hw_syndrome_ecc_wri
 		offset += ecc->size;
 
 		/* Fill OOB data in */
-		if (oob_required) {
-			tmp = 0xffffffff;
-			memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp,
-				    4);
-		} else {
-			memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, oob,
-				    4);
-		}
+		writel(NFC_BUF_TO_USER_DATA(oob),
+		       nfc->regs + NFC_REG_USER_DATA_BASE);
 
 		tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ACCESS_DIR |
 		      (1 << 30);

Patches currently in stable-queue which might be from [email protected] are

queue-4.2/mtd-nand-sunxi-fix-sunxi_nand_chips_cleanup.patch queue-4.2/mtd-nand-sunxi-fix-oob-handling-in-write_xxx-functions.patch queue-4.2/irqchip-atmel-aic5-use-per-chip-mask-caches-in-mask-unmask.patch