arm: dts: qcom: Add board clocks
Subsystems (2)
PATCH 1/1 arm: dts: qcom: Add board clocks
These clocks are fixed rate board sources that should be in DT. Add them.
Cc Georgi Djakov <[email protected]>
Signed-off-by Stephen Boyd <[email protected]>
--- arch/arm/boot/dts/qcom-msm8960.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
arch/arm/boot/dts/qcom-msm8960.dtsi +23 -0
@@ -49,6 +49,29 @@ qcom,no-pc-write; }; + clocks { + cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "cxo_board"; + }; + + pxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-output-names = "pxo_board"; + }; + + sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "sleep_clk"; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>;
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Quoted 6 lines · Stephen Boyd
These clocks are fixed rate board sources that should be in DT. Add them.
Cc Georgi Djakov <[email protected]>Signed-off-by Stephen Boyd <[email protected]>---
Reviewed-by Andy Gross <[email protected]>
Signature · 3 lines
Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project