ARM: dts: bcm5301x: Add SVK DT files and docs
v4 cover ARM: dts: bcm5301x: Add SVK DT files and docs
Resending due to lack of any response to the original v4 series
Changes in v4:
* Changed bootargs to stdout-path, per Sudeep Holla
Changes in v3:
* Updated the DT documentation compat strings
* Modified the include files and compat strings for the SVK DT files, per Hauke Mehrtens
Changes in v2:
* Reorder the patches to add the DT binding documentation prior to the new DT files
* Removed the DT documentation compat strings to only the SoCs, not the individual boards
* Fixed the compat strings in the individual device tree files
* Added the memory node and removed the "mem=" from the bootargs
Add device tree files and update the documentation for Broadcom Northstar based SVKs. Since the bcm5301x.dtsi already exists, all that is necessary is the dts files to enable the UARTs. With these files, the SVKs are able to boot to shell
Jon Mason (2):
dt-bindings: Add new SoCs to bcm4708 DT bindings
ARM: dts: bcm5301x: Add BCM SVK DT files
.../devicetree/bindings/arm/bcm/brcm,bcm4708.txt | 7 +++ arch/arm/boot/dts/Makefile | 5 +- arch/arm/boot/dts/bcm94708.dts | 56 +++++++++++++++++++ arch/arm/boot/dts/bcm94709.dts | 56 +++++++++++++++++++ arch/arm/boot/dts/bcm953012k.dts | 63 ++++++++++++++++++++++ 5 files changed, 186 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/bcm94708.dts create mode 100644 arch/arm/boot/dts/bcm94709.dts create mode 100644 arch/arm/boot/dts/bcm953012k.dts
Signature · 1 line
1.9.1
PATCH RESEND v4 1/2 dt-bindings: Add new SoCs to bcm4708 DT bindings
Add the 4708, 4709, and 53012 SoCs to the the documentation for the Broadcom Northstar device tree bindings.
--- Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt | 7 +++++++ 1 file changed, 7 insertions(+)
Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt +7 -0
@@ -5,4 +5,11 @@ Boards with the BCM4708 SoC shall have the following properties: Required root node property: +bcm4708 compatible = "brcm,bcm4708"; + +bcm4709 +compatible = "brcm,bcm4709"; + +bcm53012 +compatible = "brcm,bcm53012";
Signature · 1 line
1.9.1
PATCH RESEND v4 2/2 ARM: dts: bcm5301x: Add BCM SVK DT files
In reply to Jon MasonAdd device tree files for Broadcom Northstar based SVKs. Since the bcm5301x.dtsi already exists, all that is necessary is the dts files to enable the UARTs. With these files, the SVKs are able to boot to shell.
--- arch/arm/boot/dts/Makefile | 5 +++- arch/arm/boot/dts/bcm94708.dts | 56 +++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/bcm94709.dts | 56 +++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/bcm953012k.dts | 63 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 179 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/bcm94708.dts create mode 100644 arch/arm/boot/dts/bcm94709.dts create mode 100644 arch/arm/boot/dts/bcm953012k.dts
arch/arm/boot/dts/Makefile +4 -1
@@ -72,7 +72,10 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47081-buffalo-wzr-900dhp.dtb \ bcm4709-asus-rt-ac87u.dtb \ bcm4709-buffalo-wxr-1900dhp.dtb \ - bcm4709-netgear-r8000.dtb + bcm4709-netgear-r8000.dtb \ + bcm94708.dtb \ + bcm94709.dtb \ + bcm953012k.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += \ bcm963138dvt.dtb dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
arch/arm/boot/dts/bcm94708.dts new file +56 -0
56 lines not on this page · raw message
arch/arm/boot/dts/bcm94709.dts new file +56 -0
56 lines not on this page · raw message
arch/arm/boot/dts/bcm953012k.dts new file +63 -0
63 lines not on this page · raw message
Signature · 1 line
1.9.1
Quoted 10 lines · Jon Mason
Resending due to lack of any response to the original v4 series
Changes in v4:
* Changed bootargs to stdout-path, per Sudeep HollaChanges in v3:
* Updated the DT documentation compat strings
* Modified the include files and compat strings for the SVK DT files, per Hauke Mehrtens
Quoted 7 lines
Changes in v2:
* Reorder the patches to add the DT binding documentation prior to the new DT files
* Removed the DT documentation compat strings to only the SoCs, not the individual boards
* Fixed the compat strings in the individual device tree files
* Added the memory node and removed the "mem=" from the bootargs
Series applied to devicetree/next, thanks Jon!
Signature · 1 line
Florian