Skip to contentSkip to conversation

MIPS: ath79: add ar9331 pbl support

PATCH Applied Antony Pavlov 2 participants 11 messages Nov 3, 2015 MIPS

lore
Share & tools
lore
#0 lore raw

v2 cover MIPS: ath79: add ar9331 pbl support

This patchseries adds full clock and RAM initialization for AR9331-based boards: now barebox can start without any other bootloader's help.

This series tested with TP-Link MR3020 (DDR1 RAM) and Black Swift (DDR2 RAM) boards.

See also
https://github.com/pepe2k/u-boot_mod

Future works:

* add 'check run from ROM' commit by Oleksij Rempel (do 0xbfc test);
* enable more GPIO features (see 'pbl_reg_set (1 << 18), 0xb80600ac').

Changes since v1:

* make commit messages more consistent;
* add 'Future works' to cover letter.

Antony Pavlov (8):
MIPS: ath79: add pbl_ar9331_ddr2_config macro
MIPS: ath79: add pbl_ar9331_uart_enable macro
MIPS: ath79: add debug_ll_ar9331_init macro
MIPS: ath79: add black-swift board support
MIPS: ath79: add black-swift_defconfig
MIPS: ath79: add pbl_ar9331_ddr1_config macro
MIPS: tplink-mr3020: add pbl low level init
MIPS: tplink-mr3020_defconfig: enable pbl; make image shorter

Oleksij Rempel (1):
MIPS: ath79: add pbl_ar9331_pll macro

 arch/mips/Makefile                                 |   1 +
 arch/mips/boards/black-swift/Makefile              |   1 +
 arch/mips/boards/black-swift/board.c               |  27 +++
 .../black-swift/include/board/board_pbl_start.h    |  41 +++++
 .../tplink-mr3020/include/board/board_pbl_start.h  |   6 +
 arch/mips/configs/black-swift_defconfig            |  46 ++++++
 arch/mips/configs/tplink-mr3020_defconfig          |   3 +
 arch/mips/dts/black-swift.dts                      |  34 ++++
 arch/mips/include/asm/pbl_macros.h                 |  32 ++++
 arch/mips/mach-ath79/Kconfig                       |   6 +
 arch/mips/mach-ath79/include/mach/ar71xx_regs.h    |  24 +++
 arch/mips/mach-ath79/include/mach/debug_ll.h       |  29 ++++
 arch/mips/mach-ath79/include/mach/pbl_macros.h     | 182 +++++++++++++++++++++
 13 files changed, 432 insertions(+)
 create mode 100644 arch/mips/boards/black-swift/Makefile
 create mode 100644 arch/mips/boards/black-swift/board.c
 create mode 100644 arch/mips/boards/black-swift/include/board/board_pbl_start.h
 create mode 100644 arch/mips/configs/black-swift_defconfig
 create mode 100644 arch/mips/dts/black-swift.dts
 create mode 100644 arch/mips/mach-ath79/include/mach/pbl_macros.h
Signature · 7 lines
2.6.2


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#1 lore raw

PATCH v2 1/9 MIPS: ath79: add pbl_ar9331_pll macro

From: Oleksij Rempel <[email protected]>

---
 arch/mips/include/asm/pbl_macros.h              | 21 ++++++++++++
 arch/mips/mach-ath79/include/mach/ar71xx_regs.h |  1 +
 arch/mips/mach-ath79/include/mach/pbl_macros.h  | 43 +++++++++++++++++++++++++
 3 files changed, 65 insertions(+)
arch/mips/include/asm/pbl_macros.h +21 -0
index 1d9d6ab..db46d0d 100644
@@ -28,6 +28,27 @@
 #include <generated/compile.h>
 #include <generated/utsrelease.h>
 
+	.macro	pbl_reg_writel val addr
+	.set push
+	.set noreorder
+	li	t9, \addr
+	li	t8, \val
+	sw	t8, 0(t9)
+	.set	pop
+	.endm
+
+	.macro	pbl_reg_clr clr addr
+	.set push
+	.set noreorder
+	li	t9, \addr
+	li	t8, \clr
+	lw	t7, 0(t9)
+	not	t8, t8
+	and	t7, t8
+	sw	t7, 0(t9)
+	.set	pop
+	.endm
+
 	.macro	pbl_sleep reg count
 	.set push
 	.set noreorder
arch/mips/mach-ath79/include/mach/ar71xx_regs.h +1 -0
index b82a8c3..a1d7db0 100644
@@ -63,6 +63,7 @@
 #define AR933X_PLL_CPU_CONFIG_REFDIV_MASK	0x1f
 #define AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT	23
 #define AR933X_PLL_CPU_CONFIG_OUTDIV_MASK	0x7
+#define AR933X_PLL_CPU_CONFIG_PLLPWD		BIT(30)
 
 #define AR933X_PLL_CLOCK_CTRL_BYPASS		BIT(2)
 #define AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT	5
arch/mips/mach-ath79/include/mach/pbl_macros.h new file +43 -0

43 lines not on this page · raw message

Signature · 7 lines
2.6.2


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#2 lore raw

PATCH v2 2/9 MIPS: ath79: add pbl_ar9331_ddr2_config macro

In reply to Antony Pavlov

See also u-boot_mod/u-boot/cpu/mips/ar7240/hornet_ddr_init.S

---
 arch/mips/mach-ath79/include/mach/ar71xx_regs.h | 20 ++++++
 arch/mips/mach-ath79/include/mach/pbl_macros.h  | 89 +++++++++++++++++++++++++
 2 files changed, 109 insertions(+)
arch/mips/mach-ath79/include/mach/ar71xx_regs.h +20 -0
index a1d7db0..0b84c55 100644
@@ -23,6 +23,8 @@
 
 #define AR71XX_APB_BASE		0x18000000
 
+#define AR71XX_DDR_CTRL_BASE	(AR71XX_APB_BASE + 0x00000000)
+#define AR71XX_DDR_CTRL_SIZE	0x100
 #define AR71XX_GPIO_BASE	(AR71XX_APB_BASE + 0x00040000)
 #define AR71XX_GPIO_SIZE	0x100
 #define AR71XX_PLL_BASE		(AR71XX_APB_BASE + 0x00050000)
@@ -34,6 +36,24 @@
 #define AR933X_UART_SIZE	0x14
 
 /*
+ * DDR_CTRL block
+ */
+#define AR933X_DDR_CONFIG		0x00
+#define AR933X_DDR_CONFIG2		0x04
+#define AR933X_DDR_MODE			0x08
+#define AR933X_DDR_EXT_MODE		0x0c
+#define AR933X_DDR_CTRL			0x10
+#define AR933X_DDR_REFRESH		0x14
+#define AR933X_DDR_RD_DATA		0x18
+#define AR933X_DDR_TAP_CTRL0		0x1c
+#define AR933X_DDR_TAP_CTRL1		0x20
+#define AR933X_DDR_TAP_CTRL1		0x20
+
+#define AR933X_DDR_DDR_DDR2_CONFIG	0x8c
+#define AR933X_DDR_DDR_EMR2		0x90
+#define AR933X_DDR_DDR_EMR3		0x94
+
+/*
  * GPIO block
  */
 #define AR71XX_GPIO_REG_OE		0x00
arch/mips/mach-ath79/include/mach/pbl_macros.h +89 -0

93 lines not on this page · raw message

Signature · 7 lines
2.6.2


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#3 lore raw

PATCH v2 3/9 MIPS: ath79: add pbl_ar9331_uart_enable macro

In reply to Antony Pavlov
---
 arch/mips/include/asm/pbl_macros.h              | 11 +++++++++++
 arch/mips/mach-ath79/include/mach/ar71xx_regs.h |  3 +++
 arch/mips/mach-ath79/include/mach/pbl_macros.h  |  7 +++++++
 3 files changed, 21 insertions(+)
arch/mips/include/asm/pbl_macros.h +11 -0
index db46d0d..681b40a 100644
@@ -37,6 +37,17 @@
 	.set	pop
 	.endm
 
+	.macro	pbl_reg_set val addr
+	.set push
+	.set noreorder
+	li	t9, \addr
+	li	t8, \val
+	lw	t7, 0(t9)
+	or	t7, t8
+	sw	t7, 0(t9)
+	.set	pop
+	.endm
+
 	.macro	pbl_reg_clr clr addr
 	.set push
 	.set noreorder
arch/mips/mach-ath79/include/mach/ar71xx_regs.h +3 -0
index 0b84c55..4cbe94a 100644
@@ -67,6 +67,9 @@
 #define AR71XX_GPIO_REG_INT_PENDING	0x20
 #define AR71XX_GPIO_REG_INT_ENABLE	0x24
 #define AR71XX_GPIO_REG_FUNC		0x28
+/* Warning! GPIO_FUNC[15] must be written with 1 */
+#define AR933X_GPIO_FUNC_RSRV15			BIT(15)
+#define AR933X_GPIO_FUNC_UART_EN		BIT(1)
 
 /*
  * PLL block
arch/mips/mach-ath79/include/mach/pbl_macros.h +7 -0
index f0e0174..4ef90dc 100644
@@ -129,4 +129,11 @@
 	.set	pop
 .endm
 
+#define GPIO_FUNC	((KSEG1 | AR71XX_GPIO_BASE) | AR71XX_GPIO_REG_FUNC)
+
+.macro	pbl_ar9331_uart_enable
+	pbl_reg_set AR933X_GPIO_FUNC_UART_EN \
+			| AR933X_GPIO_FUNC_RSRV15, GPIO_FUNC
+.endm
+
 #endif /* __ASM_MACH_ATH79_PBL_MACROS_H */
Signature · 7 lines
2.6.2


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#4 lore raw

PATCH v2 4/9 MIPS: ath79: add debug_ll_ar9331_init macro

In reply to Antony Pavlov
---
 arch/mips/mach-ath79/include/mach/debug_ll.h | 29 ++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
arch/mips/mach-ath79/include/mach/debug_ll.h +29 -0
index d3813af..e0c3f79 100644
@@ -63,6 +63,35 @@ static inline void PUTC_LL(int ch)
  * Macros for use in assembly language code
  */
 
+#define AR933X_UART_CS_REG		0x04
+#define UART_CS_REG	((KSEG1 | AR933X_UART_BASE) | AR933X_UART_CS_REG)
+#define AR933X_UART_CS_IF_MODE_S	2
+#define	  AR933X_UART_CS_IF_MODE_DCE	2
+#define AR933X_UART_CS_TX_READY_ORIDE	BIT(7)
+#define AR933X_UART_CS_RX_READY_ORIDE	BIT(8)
+
+/*
+ * simple uart clock setup
+ * from u-boot_mod/u-boot/cpu/mips/ar7240/hornet_serial.c
+ */
+#define BAUD_CLOCK 25000000
+#define CLOCK_SCALE ((BAUD_CLOCK / (16 * CONFIG_BAUDRATE)) - 1)
+#define CLOCK_STEP 0x2000
+
+#define AR933X_UART_CLOCK_REG		0x08
+#define CLOCK_REG	((KSEG1 | AR933X_UART_BASE) | AR933X_UART_CLOCK_REG)
+
+.macro debug_ll_ar9331_init
+#ifdef CONFIG_DEBUG_LL
+
+	pbl_reg_writel ((AR933X_UART_CS_IF_MODE_DCE << AR933X_UART_CS_IF_MODE_S) \
+			| AR933X_UART_CS_TX_READY_ORIDE \
+			| AR933X_UART_CS_RX_READY_ORIDE), UART_CS_REG
+	pbl_reg_writel ((CLOCK_SCALE << 16) | CLOCK_STEP), CLOCK_REG
+
+#endif /* CONFIG_DEBUG_LL */
+.endm
+
 /*
  * output a character in a0
  */
Signature · 7 lines
2.6.2


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#5 lore raw

PATCH v2 5/9 MIPS: ath79: add black-swift board support

In reply to Antony Pavlov

Black Swift is a tiny coin-sized embedded computer based on AR9331 SoC. See http://www.black-swift.com/ for details.

See also Black Swift kickstarter page:
https://www.kickstarter.com/projects/1133560316/black-swift-tiny-wireless-computer

---
 arch/mips/Makefile                                 |  1 +
 arch/mips/boards/black-swift/Makefile              |  1 +
 arch/mips/boards/black-swift/board.c               | 27 ++++++++++++++
 .../black-swift/include/board/board_pbl_start.h    | 41 ++++++++++++++++++++++
 arch/mips/dts/black-swift.dts                      | 34 ++++++++++++++++++
 arch/mips/mach-ath79/Kconfig                       |  6 ++++
 6 files changed, 110 insertions(+)
arch/mips/Makefile +1 -0
index 6ef2bf7..75761b5 100644
@@ -80,6 +80,7 @@ board-$(CONFIG_BOARD_NETGEAR_WG102)	:= netgear-wg102
 
 machine-$(CONFIG_MACH_MIPS_ATH79)	:= ath79
 board-$(CONFIG_BOARD_TPLINK_MR3020)	:= tplink-mr3020
+board-$(CONFIG_BOARD_BLACK_SWIFT)	:= black-swift
 
 machine-$(CONFIG_MACH_MIPS_BCM47XX)	:= bcm47xx
 board-$(CONFIG_BOARD_DLINK_DIR320)	:= dlink-dir-320
arch/mips/boards/black-swift/Makefile new file +1 -0
new file mode 100644
index 0000000..dcfc293
@@ -0,0 +1 @@
+obj-y += board.o
arch/mips/boards/black-swift/board.c new file +27 -0
new file mode 100644
index 0000000..2e2ed20
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2015 Antony Pavlov <[email protected]>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+
+static int model_hostname_init(void)
+{
+	barebox_set_hostname("black-swift");
+
+	return 0;
+}
+postcore_initcall(model_hostname_init);
arch/mips/boards/black-swift/include/board/board_pbl_start.h new file +41 -0

41 lines not on this page · raw message

arch/mips/dts/black-swift.dts new file +34 -0
new file mode 100644
index 0000000..270374d
@@ -0,0 +1,34 @@
+/dts-v1/;
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "Black Swift";
+	compatible = "smartlx,black-swift";
+
+	memory {
+		reg = <0x00000000 0x4000000>;
+	};
+
+	aliases {
+		spiflash = &spiflash;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Winbond W25Q128FV SPI flash */
+	spiflash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};
arch/mips/mach-ath79/Kconfig +6 -0
index f730b37..9b8e394 100644
@@ -13,6 +13,12 @@ config BOARD_TPLINK_MR3020
 	select HAVE_IMAGE_COMPRESSION
 	select HAS_NMON
 
+config BOARD_BLACK_SWIFT
+	bool "Black Swift"
+	select HAVE_PBL_IMAGE
+	select HAVE_IMAGE_COMPRESSION
+	select HAS_NMON
+
 endchoice
 
 endif
Signature · 7 lines
2.6.2


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#6 lore raw

PATCH v2 6/9 MIPS: ath79: add black-swift_defconfig

In reply to Antony Pavlov
---
 arch/mips/configs/black-swift_defconfig | 46 +++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)
arch/mips/configs/black-swift_defconfig new file +46 -0
new file mode 100644
index 0000000..7444968
@@ -0,0 +1,46 @@
+CONFIG_BUILTIN_DTB=y
+CONFIG_BUILTIN_DTB_NAME="black-swift"
+CONFIG_MACH_MIPS_ATH79=y
+CONFIG_BOARD_BLACK_SWIFT=y
+CONFIG_NMON=y
+CONFIG_NMON_USER_START=y
+CONFIG_NMON_1S_DELAY=0x100000
+CONFIG_NMON_USER_START_DELAY=0x5
+CONFIG_NMON_HELP=y
+CONFIG_PBL_IMAGE=y
+CONFIG_IMAGE_COMPRESSION_XZKERN=y
+CONFIG_MALLOC_TLSF=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_IMD=y
+CONFIG_PARTITION=y
+CONFIG_DEBUG_LL=y
+CONFIG_LONGHELP=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_BOOTM is not set
+CONFIG_CMD_GO=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_LOADY=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_GLOBAL=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_CMD_LET=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_MM=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_OF_NODE=y
+CONFIG_CMD_OF_PROPERTY=y
+CONFIG_CMD_OFTREE=y
+CONFIG_OFDEVICE=y
+CONFIG_DRIVER_SERIAL_AR933X=y
+CONFIG_DRIVER_SPI_ATH79=y
+CONFIG_MTD=y
+# CONFIG_MTD_OOB_DEVICE is not set
+CONFIG_MTD_M25P80=y
+CONFIG_DIGEST_SHA224_GENERIC=y
+CONFIG_DIGEST_SHA256_GENERIC=y
Signature · 7 lines
2.6.2


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#7 lore raw

PATCH v2 7/9 MIPS: ath79: add pbl_ar9331_ddr1_config macro

In reply to Antony Pavlov

See also u-boot_mod/u-boot/cpu/mips/ar7240/hornet_ddr_init.S

See also this openocd commit:

commit f59d2d9ecfee8899df531b87b7acaa468725f238
Author: Oleksij Rempel <[email protected]>
Date: Fri Jan 30 13:05:31 2015 +0100

tcl/target|board: add config Atheros ar9331

---
 arch/mips/mach-ath79/include/mach/pbl_macros.h | 43 ++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)
arch/mips/mach-ath79/include/mach/pbl_macros.h +43 -0
index 4ef90dc..c00dd28 100644
@@ -67,6 +67,49 @@
 #define DDR_EMR2		(DDR_BASE | AR933X_DDR_DDR_EMR2)
 #define DDR_EMR3		(DDR_BASE | AR933X_DDR_DDR_EMR3)
 
+.macro	pbl_ar9331_ddr1_config
+	.set	push
+	.set	noreorder
+
+	pbl_reg_writel	0x7fbc8cd0, DDR_CONFIG
+	pbl_reg_writel	0x9dd0e6a8, DDR_CONFIG2
+
+	pbl_reg_writel	DDR_CTRL_PREA, DDR_CTRL
+
+	/* 0x133: on reset Mode Register value */
+	pbl_reg_writel	0x133, DDR_MODE
+	pbl_reg_writel	DDR_CTRL_MRS, DDR_CTRL
+
+	/*
+	 * DDR_EXT_MODE[1] = 1: Reduced Drive Strength
+	 * DDR_EXT_MODE[0] = 0: Enable DLL
+	 */
+	pbl_reg_writel	0x2, DDR_EXT_MODE
+	pbl_reg_writel	DDR_CTRL_EMRS, DDR_CTRL
+
+	pbl_reg_writel	DDR_CTRL_PREA, DDR_CTRL
+
+	/* DLL out of reset, CAS Latency 3 */
+	pbl_reg_writel	0x33, DDR_MODE
+	pbl_reg_writel	DDR_CTRL_MRS, DDR_CTRL
+
+	/* Refresh control. Bit 14 is enable. Bits<13:0> Refresh time */
+	pbl_reg_writel	0x4186, DDR_REFRESH
+	/* This register is used along with DQ Lane 0; DQ[7:0], DQS_0 */
+	pbl_reg_writel	0x8, DDR_TAP_CTRL0
+	/* This register is used along with DQ Lane 1; DQ[15:8], DQS_1 */
+	pbl_reg_writel	0x9, DDR_TAP_CTRL1
+
+	/*
+	 * DDR read and capture bit mask.
+	 * Each bit represents a cycle of valid data.
+	 * 0xff: use 16-bit DDR
+	 */
+	pbl_reg_writel	0xff, DDR_RD_DATA
+
+	.set	pop
+.endm
+
 .macro	pbl_ar9331_ddr2_config
 	.set	push
 	.set	noreorder
Signature · 7 lines
2.6.2


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#8 lore raw

PATCH v2 8/9 MIPS: tplink-mr3020: add pbl low level init

In reply to Antony Pavlov
---
 arch/mips/boards/tplink-mr3020/include/board/board_pbl_start.h | 6 ++++++
 1 file changed, 6 insertions(+)
arch/mips/boards/tplink-mr3020/include/board/board_pbl_start.h +6 -0
index 944a510..08204fe 100644
@@ -17,6 +17,7 @@
  */
 
 #include <asm/pbl_macros.h>
+#include <mach/pbl_macros.h>
 #include <asm/pbl_nmon.h>
 
 	.macro	board_pbl_start
@@ -27,6 +28,11 @@
 
 	mips_disable_interrupts
 
+	pbl_ar9331_pll
+	pbl_ar9331_ddr1_config
+
+	pbl_ar9331_uart_enable
+	debug_ll_ar9331_init
 	mips_nmon
 
 	copy_to_link_location	pbl_start
Signature · 7 lines
2.6.2


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#9 lore raw

PATCH v2 9/9 MIPS: tplink-mr3020_defconfig: enable pbl; make image shorter

In reply to Antony Pavlov
---
 arch/mips/configs/tplink-mr3020_defconfig | 3 +++
 1 file changed, 3 insertions(+)
arch/mips/configs/tplink-mr3020_defconfig +3 -0
index b675993..f2ba2da 100644
@@ -1,6 +1,9 @@
 CONFIG_BUILTIN_DTB=y
 CONFIG_BUILTIN_DTB_NAME="tplink-mr3020"
 CONFIG_MACH_MIPS_ATH79=y
+CONFIG_PBL_IMAGE=y
+CONFIG_IMAGE_COMPRESSION_XZKERN=y
+CONFIG_MALLOC_TLSF=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
 CONFIG_LONGHELP=y
Signature · 7 lines
2.6.2


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Applied
#10 lore raw
In reply to Antony Pavlov
Quoted 13 lines · Antony Pavlov

This patchseries adds full clock and RAM initialization for AR9331-based boards: now barebox can start without any other bootloader's help.

This series tested with TP-Link MR3020 (DDR1 RAM) and Black Swift (DDR2 RAM) boards.

See also
https://github.com/pepe2k/u-boot_mod

Future works:

Quoted 8 lines

* add 'check run from ROM' commit by Oleksij Rempel (do 0xbfc test);
* enable more GPIO features (see 'pbl_reg_set (1 << 18), 0xb80600ac').

Changes since v1:

* make commit messages more consistent;
* add 'Future works' to cover letter.

Applied, thanks

Sascha

Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox