spi: cadence_qspi: Ensure check for max frequency in place
PATCH v5 4/5 spi: cadence_qspi: Ensure check for max frequency in place
Ensure the intended SCLK frequency not exceeding the maximum frequency. If that happen, SCLK will set to maximum frequency.
---
Changes for v5
- shuffling the patches
Changes for v4
- no changes
Changes for v3
- Remove the printout
Changes for v2
- no changes
--- drivers/spi/cadence_qspi.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/spi/cadence_qspi.c +3 -0
@@ -122,6 +122,9 @@ static int cadence_spi_set_speed(struct udevice *bus, uint hz)struct cadence_spi_priv *priv =dev_get_priv (bus);int err; +if (hz > plat->max_hz) + hz = plat->max_hz; +/* Disable QSPI */ cadence_qspi_apb_controller_disable (priv->regbase);
Signature · 1 line
2.2.0
PATCH v5 4/5 spi: cadence_qspi: Ensure check for max frequency in place
Quoted 12 lines · Chin Liang See
Ensure the intended SCLK frequency not exceeding the maximum frequency. If that happen, SCLK will set to maximum frequency.
Signed-off-by Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Marek Vasut <[email protected]>Cc Stefan Roese <[email protected]>Cc Vikas Manocha <[email protected]>Cc Jagannadh Teki <[email protected]>Cc Pavel Machek <[email protected]>Acked-by Pavel Machek <[email protected]>
Best regards,
Marek Vasut
PATCH v5 4/5 spi: cadence_qspi: Ensure check for max frequency in place
Quoted 14 lines · marex at denx.de
Quoted 12 lines · Chin Liang See
Ensure the intended SCLK frequency not exceeding the maximum frequency. If that happen, SCLK will set to maximum frequency.
Signed-off-by Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Marek Vasut <[email protected]>Cc Stefan Roese <[email protected]>Cc Vikas Manocha <[email protected]>Cc Jagannadh Teki <[email protected]>Cc Pavel Machek <[email protected]>Acked-by Pavel Machek <[email protected]>
Quoted 2 lines
Acked-by Marek Vasut <[email protected]>
Thanks Marek for the review.
I noticed these patches yet to be applied.
Wonder you able to apply these?
Thanks
Chin Liang
Quoted 2 lines
Best regards,
Marek Vasut
PATCH v5 4/5 spi: cadence_qspi: Ensure check for max frequency in place
Quoted 15 lines · Chin Liang See
Quoted 14 lines · marex at denx.de
Quoted 12 lines · Chin Liang See
Ensure the intended SCLK frequency not exceeding the maximum frequency. If that happen, SCLK will set to maximum frequency.
Signed-off-by Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Marek Vasut <[email protected]>Cc Stefan Roese <[email protected]>Cc Vikas Manocha <[email protected]>Cc Jagannadh Teki <[email protected]>Cc Pavel Machek <[email protected]>Acked-by Pavel Machek <[email protected]>
Quoted 6 lines
Quoted 1 line
Acked-by Marek Vasut <[email protected]>Thanks Marek for the review.
I noticed these patches yet to be applied.
Wonder you able to apply these?
Sorry about that, applied all five, thanks!
Best regards,
Marek Vasut
PATCH v5 4/5 spi: cadence_qspi: Ensure check for max frequency in place
Quoted 16 lines · marex at denx.de
Quoted 15 lines · Chin Liang See
Quoted 14 lines · marex at denx.de
Quoted 12 lines · Chin Liang See
Ensure the intended SCLK frequency not exceeding the maximum frequency. If that happen, SCLK will set to maximum frequency.
Signed-off-by Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Marek Vasut <[email protected]>Cc Stefan Roese <[email protected]>Cc Vikas Manocha <[email protected]>Cc Jagannadh Teki <[email protected]>Cc Pavel Machek <[email protected]>Acked-by Pavel Machek <[email protected]>
Quoted 8 lines
Quoted 6 lines
Quoted 1 line
Acked-by Marek Vasut <[email protected]>Thanks Marek for the review.
I noticed these patches yet to be applied.
Wonder you able to apply these?Sorry about that, applied all five, thanks!
No worries, thanks Marek!
Thanks
Chin Liang
Quoted 3 lines
Best regards,
Marek Vasut