Skip to contentSkip to conversation

Patch "serial: 8250_pci: Add support for 12 port Exar boards" has been added to the 4.1-stable tree

PATCH [email protected] 1 participant 1 message Nov 6, 2015

Subsystems (2)
Stable branch TTY layer and serial drivers
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

serial: 8250_pci: Add support for 12 port Exar boards

to the 4.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:

     serial-8250_pci-add-support-for-12-port-exar-boards.patch

and it can be found in the queue-4.1 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From be32c0cf0462c36f482b5ddcff1d8371be1e183c Mon Sep 17 00:00:00 2001

From: Soeren Grunewald <[email protected]>
Date: Thu, 11 Jun 2015 09:25:04 +0200
Subject: serial: 8250_pci: Add support for 12 port Exar boards

From: Soeren Grunewald <[email protected]>

commit be32c0cf0462c36f482b5ddcff1d8371be1e183c upstream.

The Exar XR17V358 can also be combined with a XR17V354 chip to act as a single 12 port chip. This works the same way as the combining two XR17V358 chips. But the reported device id then is 0x4358.

Signed-off-by Soeren Grunewald <[email protected]>
Signed-off-by Greg Kroah-Hartman <[email protected]>
---
 drivers/tty/serial/8250/8250_pci.c |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
drivers/tty/serial/8250/8250_pci.c +21 -0
@@ -1998,6 +1998,7 @@ pci_wch_ch38x_setup(struct serial_privat
 #define PCIE_DEVICE_ID_WCH_CH382_2S1P	0x3250
 #define PCIE_DEVICE_ID_WCH_CH384_4S	0x3470
 
+#define PCI_DEVICE_ID_EXAR_XR17V4358	0x4358
 #define PCI_DEVICE_ID_EXAR_XR17V8358	0x8358
 
 #define PCI_VENDOR_ID_PERICOM			0x12D8

@@ -2515,6 +2516,13 @@ static struct pci_serial_quirk pci_seria
 	},
 	{
 		.vendor = PCI_VENDOR_ID_EXAR,
+		.device = PCI_DEVICE_ID_EXAR_XR17V4358,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_xr17v35x_setup,
+	},
+	{
+		.vendor = PCI_VENDOR_ID_EXAR,
 		.device = PCI_DEVICE_ID_EXAR_XR17V8358,
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,

@@ -2999,6 +3007,7 @@ enum pci_board_num_t {
 	pbn_exar_XR17V352,
 	pbn_exar_XR17V354,
 	pbn_exar_XR17V358,
+	pbn_exar_XR17V4358,
 	pbn_exar_XR17V8358,
 	pbn_exar_ibm_saturn,
 	pbn_pasemi_1682M,

@@ -3690,6 +3699,14 @@ static struct pciserial_board pci_boards
 		.reg_shift	= 0,
 		.first_offset	= 0,
 	},
+	[pbn_exar_XR17V4358] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 12,
+		.base_baud	= 7812500,
+		.uart_offset	= 0x400,
+		.reg_shift	= 0,
+		.first_offset	= 0,
+	},
 	[pbn_exar_XR17V8358] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 16,

@@ -5133,6 +5150,10 @@ static struct pci_device_id serial_pci_t
 		PCI_ANY_ID, PCI_ANY_ID,
 		0,
 		0, pbn_exar_XR17V358 },
+	{	PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V4358,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_exar_XR17V4358 },
 	{	PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V8358,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0,

Patches currently in stable-queue which might be from [email protected] are

queue-4.1/serial-8250_pci-add-support-for-12-port-exar-boards.patch