drm: support hotspot for universal plane cursors
Subsystems (2)
PATCH 1/1 drm: support hotspot for universal plane cursors
The request's hot_x and hot_y are set correctly for both DRM_IOCTL_MODE_CURSOR and DRM_IOCTL_MODE_CURSOR2 so we just need to save the values and then apply the offset to the cursor plane when the cursor moves.
--- drivers/gpu/drm/drm_crtc.c | 11 +++++++---- include/drm/drm_crtc.h | 4 ++++ 2 files changed, 11 insertions(+), 4 deletions(-)
drivers/gpu/drm/drm_crtc.c +7 -4
@@ -2831,6 +2831,9 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc,DRM_DEBUG_KMS ("failed to wrap cursor buffer in drm framebuffer\n" );return PTR_ERR (fb); } + + crtc->hot_x = req->hot_x; + crtc->hot_y = req->hot_y; }else { fb =NULL ; }
@@ -2841,11 +2844,11 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc, }if (req->flags &DRM_MODE_CURSOR_MOVE ) { - crtc_x = req->x; - crtc_y = req->y; + crtc_x = req->x - crtc->hot_x; + crtc_y = req->y - crtc->hot_y; }else { - crtc_x = crtc->cursor_x; - crtc_y = crtc->cursor_y; + crtc_x = crtc->cursor_x - crtc->hot_x; + crtc_y = crtc->cursor_y - crtc->hot_y; }if (fb) {
include/drm/drm_crtc.h +4 -0
@@ -445,6 +445,10 @@ struct drm_crtc {int cursor_x;int cursor_y; +/* hotspot of cursor */ +int hot_x; +int hot_y; +bool enabled;/* Requested mode from modesetting. */
Signature · 1 line
2.6.2.400.gcb098da
kbuild test robot
build botAll warnings (new ones prefixed by >>):
Hi John,
[auto build test WARNING on drm/drm-next] [also build test WARNING on v4.4-rc1 next-20151117]
url: https://github.com/0day-ci/linux/commits/John-Keeping/drm-support-hotspot-for-universal-plane-cursors/20151117-203428 base: git://people.freedesktop.org/~airlied/linux.git drm-next reproduce: make htmldocs
All warnings (new ones prefixed by >>):
drivers/gpu/drm/i915/i915_irq.c:2584: warning: No description found for parameter 'wedged' drivers/gpu/drm/i915/i915_irq.c:2584: warning: No description found for parameter 'fmt' include/drm/drm_crtc.h:310: warning: No description found for parameter 'mode_blob'
>> include/drm/drm_crtc.h:481: warning: No description found for parameter 'hot_x' >> include/drm/drm_crtc.h:481: warning: No description found for parameter 'hot_y'
include/drm/drm_crtc.h:741: warning: No description found for parameter 'tile_blob_ptr' include/drm/drm_crtc.h:780: warning: No description found for parameter 'rotation' include/drm/drm_crtc.h:876: warning: No description found for parameter 'mutex' include/drm/drm_crtc.h:876: warning: No description found for parameter 'helper_private' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'tile_idr' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'delayed_event' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'edid_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'dpms_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'path_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'tile_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'plane_type_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'rotation_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'prop_src_x' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'prop_src_y' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'prop_src_w' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'prop_src_h' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'prop_crtc_x' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'prop_crtc_y' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'prop_crtc_w' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'prop_crtc_h' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'prop_fb_id' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'prop_crtc_id' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'prop_active' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'prop_mode_id' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'dvi_i_subconnector_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'dvi_i_select_subconnector_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'tv_subconnector_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'tv_select_subconnector_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'tv_mode_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'tv_left_margin_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'tv_right_margin_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'tv_top_margin_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'tv_bottom_margin_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'tv_brightness_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'tv_contrast_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'tv_flicker_reduction_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'tv_overscan_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'tv_saturation_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'tv_hue_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'scaling_mode_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'aspect_ratio_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'dirty_info_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'suggested_x_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'suggested_y_property' include/drm/drm_crtc.h:1161: warning: No description found for parameter 'allow_fb_modifiers' include/drm/drm_fb_helper.h:148: warning: No description found for parameter 'connector_info' include/drm/drm_dp_helper.h:713: warning: No description found for parameter 'i2c_nack_count' include/drm/drm_dp_helper.h:713: warning: No description found for parameter 'i2c_defer_count' drivers/gpu/drm/drm_dp_mst_topology.c:2227: warning: No description found for parameter 'connector' include/drm/drm_dp_mst_helper.h:97: warning: No description found for parameter 'cached_edid' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'max_dpcd_transaction_bytes' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'sink_count' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'total_slots' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'avail_slots' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'total_pbn' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'qlock' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'tx_msg_downq' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'tx_msg_upq' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'tx_down_in_progress' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'tx_up_in_progress' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'payload_lock' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'proposed_vcpis' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'payloads' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'payload_mask' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'vcpi_mask' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'tx_waitq' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'work' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'tx_work' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'destroy_connector_list' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'destroy_connector_lock' include/drm/drm_dp_mst_helper.h:472: warning: No description found for parameter 'destroy_connector_work' drivers/gpu/drm/drm_dp_mst_topology.c:2227: warning: No description found for parameter 'connector' drivers/gpu/drm/drm_irq.c:173: warning: No description found for parameter 'flags' include/drm/drmP.h:168: warning: No description found for parameter 'fmt' include/drm/drmP.h:184: warning: No description found for parameter 'fmt' include/drm/drmP.h:202: warning: No description found for parameter 'fmt' include/drm/drmP.h:247: warning: No description found for parameter 'dev' include/drm/drmP.h:247: warning: No description found for parameter 'data' include/drm/drmP.h:247: warning: No description found for parameter 'file_priv' include/drm/drmP.h:280: warning: No description found for parameter 'ioctl' include/drm/drmP.h:280: warning: No description found for parameter '_func' include/drm/drmP.h:280: warning: No description found for parameter '_flags' include/drm/drmP.h:353: warning: cannot understand function prototype: 'struct drm_lock_data ' include/drm/drmP.h:406: warning: cannot understand function prototype: 'struct drm_driver ' include/drm/drmP.h:656: warning: cannot understand function prototype: 'struct drm_info_list ' include/drm/drmP.h:666: warning: cannot understand function prototype: 'struct drm_info_node ' include/drm/drmP.h:676: warning: cannot understand function prototype: 'struct drm_minor ' include/drm/drmP.h:724: warning: cannot understand function prototype: 'struct drm_device ' drivers/gpu/drm/i915/i915_irq.c:2584: warning: No description found for parameter 'wedged' drivers/gpu/drm/i915/i915_irq.c:2584: warning: No description found for parameter 'fmt' drivers/gpu/drm/i915/i915_irq.c:2584: warning: No description found for parameter 'wedged' drivers/gpu/drm/i915/i915_irq.c:2584: warning: No description found for parameter 'fmt' drivers/gpu/drm/i915/i915_irq.c:2584: warning: No description found for parameter 'wedged' drivers/gpu/drm/i915/i915_irq.c:2584: warning: No description found for parameter 'fmt' drivers/gpu/drm/i915/i915_irq.c:2584: warning: No description found for parameter 'wedged' drivers/gpu/drm/i915/i915_irq.c:2584: warning: No description found for parameter 'fmt' drivers/gpu/drm/i915/i915_gem.c:421: warning: No description found for parameter 'dev' drivers/gpu/drm/i915/i915_gem.c:421: warning: No description found for parameter 'data' drivers/gpu/drm/i915/i915_gem.c:421: warning: No description found for parameter 'file' drivers/gpu/drm/i915/i915_gem.c:686: warning: No description found for parameter 'dev'
vim +/hot_x +481 include/drm/drm_crtc.h
99cf4a29f Daniel Stone 2015-05-25 304 /* blob property to expose current mode to atomic userspace */
99cf4a29f Daniel Stone 2015-05-25 305 struct drm_property_blob *mode_blob;
99cf4a29f Daniel Stone 2015-05-25 306
144ecb97c Daniel Vetter 2014-10-27 307 struct drm_pending_vblank_event *event;
144ecb97c Daniel Vetter 2014-10-27 308
144ecb97c Daniel Vetter 2014-10-27 309 struct drm_atomic_state *state;
144ecb97c Daniel Vetter 2014-10-27 @310 };
f453ba046 Dave Airlie 2008-11-07 311
f453ba046 Dave Airlie 2008-11-07 312 /**
3bf0401cd Daniel Vetter 2014-10-27 313 * struct drm_crtc_funcs - control CRTCs for a given device
f453ba046 Dave Airlie 2008-11-07 314 * @save: save CRTC state
3b02ab889 Laurent Pinchart 2012-05-17 315 * @restore: restore CRTC state
715f59cc2 Christopher Harvey 2013-04-05 316 * @reset: reset CRTC after state has been invalidated (e.g. resume)
3b02ab889 Laurent Pinchart 2012-05-17 317 * @cursor_set: setup the cursor
2c0c33d41 Daniel Vetter 2014-10-27 318 * @cursor_set2: setup the cursor with hotspot, superseeds @cursor_set if set
3b02ab889 Laurent Pinchart 2012-05-17 319 * @cursor_move: move the cursor
f453ba046 Dave Airlie 2008-11-07 320 * @gamma_set: specify color ramp for CRTC
bffd9de02 Paulo Zanoni 2012-05-15 321 * @destroy: deinit and free object
bffd9de02 Paulo Zanoni 2012-05-15 322 * @set_property: called when a property is changed
3b02ab889 Laurent Pinchart 2012-05-17 323 * @set_config: apply a new CRTC configuration
3b02ab889 Laurent Pinchart 2012-05-17 324 * @page_flip: initiate a page flip
144ecb97c Daniel Vetter 2014-10-27 325 * @atomic_duplicate_state: duplicate the atomic state for this CRTC
144ecb97c Daniel Vetter 2014-10-27 326 * @atomic_destroy_state: destroy an atomic state for this CRTC
144ecb97c Daniel Vetter 2014-10-27 327 * @atomic_set_property: set a property on an atomic state for this CRTC
40ecc694e Rob Clark 2014-12-18 328 * (do not call directly, use drm_atomic_crtc_set_property())
ac9c92561 Rob Clark 2014-12-18 329 * @atomic_get_property: get a property on an atomic state for this CRTC
ac9c92561 Rob Clark 2014-12-18 330 * (do not call directly, use drm_atomic_crtc_get_property())
f453ba046 Dave Airlie 2008-11-07 331 *
f453ba046 Dave Airlie 2008-11-07 332 * The drm_crtc_funcs structure is the central CRTC management structure
f453ba046 Dave Airlie 2008-11-07 333 * in the DRM. Each CRTC controls one or more connectors (note that the name
f453ba046 Dave Airlie 2008-11-07 334 * CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc.
f453ba046 Dave Airlie 2008-11-07 335 * connectors, not just CRTs).
f453ba046 Dave Airlie 2008-11-07 336 *
f453ba046 Dave Airlie 2008-11-07 337 * Each driver is responsible for filling out this structure at startup time,
f453ba046 Dave Airlie 2008-11-07 338 * in addition to providing other modesetting features, like i2c and DDC
f453ba046 Dave Airlie 2008-11-07 339 * bus accessors.
f453ba046 Dave Airlie 2008-11-07 340 */
f453ba046 Dave Airlie 2008-11-07 341 struct drm_crtc_funcs {
f453ba046 Dave Airlie 2008-11-07 342 /* Save CRTC state */
f453ba046 Dave Airlie 2008-11-07 343 void (*save)(struct drm_crtc *crtc); /* suspend? */
f453ba046 Dave Airlie 2008-11-07 344 /* Restore CRTC state */
f453ba046 Dave Airlie 2008-11-07 345 void (*restore)(struct drm_crtc *crtc); /* resume? */
eb0335566 Chris Wilson 2011-01-24 346 /* Reset CRTC state */
eb0335566 Chris Wilson 2011-01-24 347 void (*reset)(struct drm_crtc *crtc);
f453ba046 Dave Airlie 2008-11-07 348
f453ba046 Dave Airlie 2008-11-07 349 /* cursor controls */
f453ba046 Dave Airlie 2008-11-07 350 int (*cursor_set)(struct drm_crtc *crtc, struct drm_file *file_priv,
f453ba046 Dave Airlie 2008-11-07 351 uint32_t handle, uint32_t width, uint32_t height);
4c813d4d7 Dave Airlie 2013-06-20 352 int (*cursor_set2)(struct drm_crtc *crtc, struct drm_file *file_priv,
4c813d4d7 Dave Airlie 2013-06-20 353 uint32_t handle, uint32_t width, uint32_t height,
4c813d4d7 Dave Airlie 2013-06-20 354 int32_t hot_x, int32_t hot_y);
f453ba046 Dave Airlie 2008-11-07 355 int (*cursor_move)(struct drm_crtc *crtc, int x, int y);
f453ba046 Dave Airlie 2008-11-07 356
f453ba046 Dave Airlie 2008-11-07 357 /* Set gamma on the CRTC */
f453ba046 Dave Airlie 2008-11-07 358 void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
7203425a9 James Simmons 2010-08-03 359 uint32_t start, uint32_t size);
f453ba046 Dave Airlie 2008-11-07 360 /* Object destroy routine */
f453ba046 Dave Airlie 2008-11-07 361 void (*destroy)(struct drm_crtc *crtc);
f453ba046 Dave Airlie 2008-11-07 362
f453ba046 Dave Airlie 2008-11-07 363 int (*set_config)(struct drm_mode_set *set);
d91d8a3f8 Kristian Høgsberg 2009-11-17 364
d91d8a3f8 Kristian Høgsberg 2009-11-17 365 /*
d91d8a3f8 Kristian Høgsberg 2009-11-17 366 * Flip to the given framebuffer. This implements the page
25985edce Lucas De Marchi 2011-03-30 367 * flip ioctl described in drm_mode.h, specifically, the
d91d8a3f8 Kristian Høgsberg 2009-11-17 368 * implementation must return immediately and block all
d91d8a3f8 Kristian Høgsberg 2009-11-17 369 * rendering to the current fb until the flip has completed.
d91d8a3f8 Kristian Høgsberg 2009-11-17 370 * If userspace set the event flag in the ioctl, the event
d91d8a3f8 Kristian Høgsberg 2009-11-17 371 * argument will point to an event to send back when the flip
d91d8a3f8 Kristian Høgsberg 2009-11-17 372 * completes, otherwise it will be NULL.
d91d8a3f8 Kristian Høgsberg 2009-11-17 373 */
d91d8a3f8 Kristian Høgsberg 2009-11-17 374 int (*page_flip)(struct drm_crtc *crtc,
d91d8a3f8 Kristian Høgsberg 2009-11-17 375 struct drm_framebuffer *fb,
ed8d19756 Keith Packard 2013-07-22 376 struct drm_pending_vblank_event *event,
ed8d19756 Keith Packard 2013-07-22 377 uint32_t flags);
bffd9de02 Paulo Zanoni 2012-05-15 378
bffd9de02 Paulo Zanoni 2012-05-15 379 int (*set_property)(struct drm_crtc *crtc,
bffd9de02 Paulo Zanoni 2012-05-15 380 struct drm_property *property, uint64_t val);
144ecb97c Daniel Vetter 2014-10-27 381
144ecb97c Daniel Vetter 2014-10-27 382 /* atomic update handling */
144ecb97c Daniel Vetter 2014-10-27 383 struct drm_crtc_state *(*atomic_duplicate_state)(struct drm_crtc *crtc);
144ecb97c Daniel Vetter 2014-10-27 384 void (*atomic_destroy_state)(struct drm_crtc *crtc,
cc4ceb484 Daniel Vetter 2014-07-25 385 struct drm_crtc_state *state);
144ecb97c Daniel Vetter 2014-10-27 386 int (*atomic_set_property)(struct drm_crtc *crtc,
144ecb97c Daniel Vetter 2014-10-27 387 struct drm_crtc_state *state,
144ecb97c Daniel Vetter 2014-10-27 388 struct drm_property *property,
144ecb97c Daniel Vetter 2014-10-27 389 uint64_t val);
ac9c92561 Rob Clark 2014-12-18 390 int (*atomic_get_property)(struct drm_crtc *crtc,
ac9c92561 Rob Clark 2014-12-18 391 const struct drm_crtc_state *state,
ac9c92561 Rob Clark 2014-12-18 392 struct drm_property *property,
ac9c92561 Rob Clark 2014-12-18 393 uint64_t *val);
f453ba046 Dave Airlie 2008-11-07 394 };
f453ba046 Dave Airlie 2008-11-07 395
f453ba046 Dave Airlie 2008-11-07 396 /**
3bf0401cd Daniel Vetter 2014-10-27 397 * struct drm_crtc - central CRTC control structure
7749163ef Jesse Barnes 2011-11-07 398 * @dev: parent DRM device
2c0c33d41 Daniel Vetter 2014-10-27 399 * @port: OF node used by drm_of_find_possible_crtcs()
7749163ef Jesse Barnes 2011-11-07 400 * @head: list management
51fd371bb Rob Clark 2013-11-19 401 * @mutex: per-CRTC locking
7749163ef Jesse Barnes 2011-11-07 402 * @base: base KMS object for ID tracking etc.
e13161af8 Matt Roper 2014-04-01 403 * @primary: primary plane for this CRTC
e13161af8 Matt Roper 2014-04-01 404 * @cursor: cursor plane for this CRTC
2c0c33d41 Daniel Vetter 2014-10-27 405 * @cursor_x: current x position of the cursor, used for universal cursor planes
2c0c33d41 Daniel Vetter 2014-10-27 406 * @cursor_y: current y position of the cursor, used for universal cursor planes
f453ba046 Dave Airlie 2008-11-07 407 * @enabled: is this CRTC enabled?
7749163ef Jesse Barnes 2011-11-07 408 * @mode: current mode timings
7749163ef Jesse Barnes 2011-11-07 409 * @hwmode: mode timings as programmed to hw regs
f453ba046 Dave Airlie 2008-11-07 410 * @x: x position on screen
f453ba046 Dave Airlie 2008-11-07 411 * @y: y position on screen
f453ba046 Dave Airlie 2008-11-07 412 * @funcs: CRTC control functions
7749163ef Jesse Barnes 2011-11-07 413 * @gamma_size: size of gamma ramp
7749163ef Jesse Barnes 2011-11-07 414 * @gamma_store: gamma ramp values
7749163ef Jesse Barnes 2011-11-07 415 * @helper_private: mid-layer private data
bffd9de02 Paulo Zanoni 2012-05-15 416 * @properties: property tracking for this CRTC
144ecb97c Daniel Vetter 2014-10-27 417 * @state: current atomic state for this CRTC
2c0c33d41 Daniel Vetter 2014-10-27 418 * @acquire_ctx: per-CRTC implicit acquire context used by atomic drivers for
2c0c33d41 Daniel Vetter 2014-10-27 419 * legacy ioctls
f453ba046 Dave Airlie 2008-11-07 420 *
f453ba046 Dave Airlie 2008-11-07 421 * Each CRTC may have one or more connectors associated with it. This structure
f453ba046 Dave Airlie 2008-11-07 422 * allows the CRTC to be controlled.
f453ba046 Dave Airlie 2008-11-07 423 */
f453ba046 Dave Airlie 2008-11-07 424 struct drm_crtc {
f453ba046 Dave Airlie 2008-11-07 425 struct drm_device *dev;
7e435aad3 Russell King 2014-06-15 426 struct device_node *port;
f453ba046 Dave Airlie 2008-11-07 427 struct list_head head;
f453ba046 Dave Airlie 2008-11-07 428
3bf0401cd Daniel Vetter 2014-10-27 429 /*
29494c174 Daniel Vetter 2012-12-02 430 * crtc mutex
29494c174 Daniel Vetter 2012-12-02 431 *
29494c174 Daniel Vetter 2012-12-02 432 * This provides a read lock for the overall crtc state (mode, dpms
29494c174 Daniel Vetter 2012-12-02 433 * state, ...) and a write lock for everything which can be update
29494c174 Daniel Vetter 2012-12-02 434 * without a full modeset (fb, cursor data, ...)
29494c174 Daniel Vetter 2012-12-02 435 */
51fd371bb Rob Clark 2013-11-19 436 struct drm_modeset_lock mutex;
29494c174 Daniel Vetter 2012-12-02 437
f453ba046 Dave Airlie 2008-11-07 438 struct drm_mode_object base;
f453ba046 Dave Airlie 2008-11-07 439
e13161af8 Matt Roper 2014-04-01 440 /* primary and cursor planes for CRTC */
e13161af8 Matt Roper 2014-04-01 441 struct drm_plane *primary;
e13161af8 Matt Roper 2014-04-01 442 struct drm_plane *cursor;
e13161af8 Matt Roper 2014-04-01 443
161d0dc1d Matt Roper 2014-06-10 444 /* position of cursor plane on crtc */
161d0dc1d Matt Roper 2014-06-10 445 int cursor_x;
161d0dc1d Matt Roper 2014-06-10 446 int cursor_y;
161d0dc1d Matt Roper 2014-06-10 447
14ecd586d John Keeping 2015-11-17 448 /* hotspot of cursor */
14ecd586d John Keeping 2015-11-17 449 int hot_x;
14ecd586d John Keeping 2015-11-17 450 int hot_y;
14ecd586d John Keeping 2015-11-17 451
f453ba046 Dave Airlie 2008-11-07 452 bool enabled;
f453ba046 Dave Airlie 2008-11-07 453
27641c3f0 Mario Kleiner 2010-10-23 454 /* Requested mode from modesetting. */
f453ba046 Dave Airlie 2008-11-07 455 struct drm_display_mode mode;
f453ba046 Dave Airlie 2008-11-07 456
27641c3f0 Mario Kleiner 2010-10-23 457 /* Programmed mode in hw, after adjustments for encoders,
27641c3f0 Mario Kleiner 2010-10-23 458 * crtc, panel scaling etc. Needed for timestamping etc.
27641c3f0 Mario Kleiner 2010-10-23 459 */
27641c3f0 Mario Kleiner 2010-10-23 460 struct drm_display_mode hwmode;
27641c3f0 Mario Kleiner 2010-10-23 461
f453ba046 Dave Airlie 2008-11-07 462 int x, y;
f453ba046 Dave Airlie 2008-11-07 463 const struct drm_crtc_funcs *funcs;
f453ba046 Dave Airlie 2008-11-07 464
f453ba046 Dave Airlie 2008-11-07 465 /* CRTC gamma size for reporting to userspace */
f453ba046 Dave Airlie 2008-11-07 466 uint32_t gamma_size;
f453ba046 Dave Airlie 2008-11-07 467 uint16_t *gamma_store;
f453ba046 Dave Airlie 2008-11-07 468
f453ba046 Dave Airlie 2008-11-07 469 /* if you are using the helper */
9a436ee6c Jani Nikula 2015-04-13 470 const void *helper_private;
bffd9de02 Paulo Zanoni 2012-05-15 471
bffd9de02 Paulo Zanoni 2012-05-15 472 struct drm_object_properties properties;
d059f652e Daniel Vetter 2014-07-25 473
144ecb97c Daniel Vetter 2014-10-27 474 struct drm_crtc_state *state;
144ecb97c Daniel Vetter 2014-10-27 475
d059f652e Daniel Vetter 2014-07-25 476 /*
d059f652e Daniel Vetter 2014-07-25 477 * For legacy crtc ioctls so that atomic drivers can get at the locking
d059f652e Daniel Vetter 2014-07-25 478 * acquire context.
d059f652e Daniel Vetter 2014-07-25 479 */
d059f652e Daniel Vetter 2014-07-25 480 struct drm_modeset_acquire_ctx *acquire_ctx;
f453ba046 Dave Airlie 2008-11-07 @481 };
f453ba046 Dave Airlie 2008-11-07 482
144ecb97c Daniel Vetter 2014-10-27 483 /**
144ecb97c Daniel Vetter 2014-10-27 484 * struct drm_connector_state - mutable connector state:::::: The code at line 481 was first introduced by commit
:::::: f453ba0460742ad027ae0c4c7d61e62817b3e7ef DRM: add mode setting support
:::::: TO: Dave Airlie <[email protected]>
:::::: CC: Dave Airlie <[email protected]>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v2 1/1 drm: support hotspot for universal plane cursors
In reply to John KeepingThe request's hot_x and hot_y are set correctly for both DRM_IOCTL_MODE_CURSOR and DRM_IOCTL_MODE_CURSOR2 so we just need to save the values and then apply the offset to the cursor plane when the cursor moves.
---
v2:
- add kerneldoc for hot_x and hot_y in struct drm_crtc
drivers/gpu/drm/drm_crtc.c | 11 +++++++---- include/drm/drm_crtc.h | 6 ++++++ 2 files changed, 13 insertions(+), 4 deletions(-)
drivers/gpu/drm/drm_crtc.c +7 -4
@@ -2831,6 +2831,9 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc,DRM_DEBUG_KMS ("failed to wrap cursor buffer in drm framebuffer\n" );return PTR_ERR (fb); } + + crtc->hot_x = req->hot_x; + crtc->hot_y = req->hot_y; }else { fb =NULL ; }
@@ -2841,11 +2844,11 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc, }if (req->flags &DRM_MODE_CURSOR_MOVE ) { - crtc_x = req->x; - crtc_y = req->y; + crtc_x = req->x - crtc->hot_x; + crtc_y = req->y - crtc->hot_y; }else { - crtc_x = crtc->cursor_x; - crtc_y = crtc->cursor_y; + crtc_x = crtc->cursor_x - crtc->hot_x; + crtc_y = crtc->cursor_y - crtc->hot_y; }if (fb) {
include/drm/drm_crtc.h +6 -0
@@ -404,6 +404,8 @@ struct drm_crtc_funcs {* @cursor: cursor plane for this CRTC * @cursor_x: current x position of the cursor, used for universal cursor planes * @cursor_y: current y position of the cursor, used for universal cursor planes +* @hot_x: x-coordinate of cursor hotspot, used for universal cursor planes +* @hot_y: y-coordinate of cursor hotspot, used for universal cursor planes * @enabled: is this CRTC enabled? * @mode: current mode timings * @hwmode: mode timings as programmed to hw regs
@@ -445,6 +447,10 @@ struct drm_crtc {int cursor_x;int cursor_y; +/* hotspot of cursor */ +int hot_x; +int hot_y; +bool enabled;/* Requested mode from modesetting. */
Signature · 6 lines
2.6.3.462.gbe2c914 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 31 lines · John Keeping
The request's
hot_xandhot_yare set correctly for bothDRM_IOCTL_MODE_CURSORandDRM_IOCTL_MODE_CURSOR2so we just need to save the values and then apply the offset to the cursor plane when the cursor moves.Signed-off-by John Keeping <[email protected]>---
v2:
- add kerneldoc forhot_xandhot_yin structdrm_crtcdrivers/gpu/drm/drm_crtc.c | 11 +++++++---- include/drm/drm_crtc.h | 6 ++++++ 2 files changed, 13 insertions(+), 4 deletions(-)drivers/gpu/drm/drm_crtc.c +3
-0@@ -2831,6 +2831,9 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc,DRM_DEBUG_KMS ("failed to wrap cursor buffer in drm framebuffer\n" );return PTR_ERR (fb); } + + crtc->hot_x = req->hot_x; + crtc->hot_y = req->hot_y; }else { fb =NULL ; }@@ -2841,11 +2844,11 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc, }
drivers/gpu/drm/drm_crtc.c static int drm_mode_cursor_universal(struct drm_crtc *crtc, · line 2851
Quoted 10 lines
drivers/gpu/drm/drm_crtc.c +4
-4if (req->flags &DRM_MODE_CURSOR_MOVE ) { - crtc_x = req->x; - crtc_y = req->y; + crtc_x = req->x - crtc->hot_x; + crtc_y = req->y - crtc->hot_y; }else { - crtc_x = crtc->cursor_x; - crtc_y = crtc->cursor_y; + crtc_x = crtc->cursor_x - crtc->hot_x; + crtc_y = crtc->cursor_y - crtc->hot_y;
Why does the location of the hotspot affect the plane position?
Naturally there's no documentation in the uapi header for any of this stuff :( Would be nice if the pople excited about documentation would fix that part instead of just focusing on the internal stuff.
Quoted 34 lines
drivers/gpu/drm/drm_crtc.c +0
-0}if (fb) {include/drm/drm_crtc.h +6
-0@@ -404,6 +404,8 @@ struct drm_crtc_funcs {* @cursor: cursor plane for this CRTC * @cursor_x: current x position of the cursor, used for universal cursor planes * @cursor_y: current y position of the cursor, used for universal cursor planes +* @hot_x: x-coordinate of cursor hotspot, used for universal cursor planes +* @hot_y: y-coordinate of cursor hotspot, used for universal cursor planes * @enabled: is this CRTC enabled? * @mode: current mode timings * @hwmode: mode timings as programmed to hw regs @@ -445,6 +447,10 @@ struct drm_crtc {int cursor_x;int cursor_y; +/* hotspot of cursor */ +int hot_x; +int hot_y; +bool enabled;/* Requested mode from modesetting. */ Signature · 6 lines
2.6.3.462.gbe2c914 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 32 lines · Ville Syrjälä
Quoted 31 lines · John Keeping
The request's
hot_xandhot_yare set correctly for bothDRM_IOCTL_MODE_CURSORandDRM_IOCTL_MODE_CURSOR2so we just need to save the values and then apply the offset to the cursor plane when the cursor moves.Signed-off-by John Keeping <[email protected]>---
v2:
- add kerneldoc forhot_xandhot_yin structdrm_crtcdrivers/gpu/drm/drm_crtc.c | 11 +++++++---- include/drm/drm_crtc.h | 6 ++++++ 2 files changed, 13 insertions(+), 4 deletions(-)drivers/gpu/drm/drm_crtc.c +0
-0@@ -2831,6 +2831,9 @@ static int drm_mode_cursor_universal(struct
drm_crtc*crtc,DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n"); returnPTR_ERR(fb);drivers/gpu/drm/drm_crtc.c +3
-0} + + crtc->hot_x = req->hot_x; + crtc->hot_y = req->hot_y; }else { fb =NULL ; }@@ -2841,11 +2844,11 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc, }
Quoted 12 lines
drivers/gpu/drm/drm_crtc.c static int drm_mode_cursor_universal(struct drm_crtc *crtc, · line 2851
Quoted 10 lines
drivers/gpu/drm/drm_crtc.c +4
-4if (req->flags &DRM_MODE_CURSOR_MOVE ) { - crtc_x = req->x; - crtc_y = req->y; + crtc_x = req->x - crtc->hot_x; + crtc_y = req->y - crtc->hot_y; }else { - crtc_x = crtc->cursor_x; - crtc_y = crtc->cursor_y; + crtc_x = crtc->cursor_x - crtc->hot_x; + crtc_y = crtc->cursor_y - crtc->hot_y;Why does the location of the hotspot affect the plane position?
hot_{x,y} specify the location of the active pixel within the cursor plane and cursor_{x,y} specify the location of the active pixel on the display so we need to offset the plane position in order for the active pixel to be in the correct place.
Quoted 30 lines
Quoted 30 lines
drivers/gpu/drm/drm_crtc.c +0
-0}if (fb) {include/drm/drm_crtc.h +0
-0@@ -404,6 +404,8 @@ struct drm_crtc_funcs {* @cursor: cursor plane for this CRTC * @cursor_x: current x position of the cursor, used for universal cursor planes
* @cursor_y: current y position of the cursor, used for universal
cursor planes
+ * @hot_x: x-coordinate of cursor hotspot, used for universal cursor planes
+ * @hot_y: y-coordinate of cursor hotspot, used for universal cursor planes
* @enabled: is this CRTC enabled?
* @mode: current mode timings
* @hwmode: mode timings as programmed to hw regsinclude/drm/drm_crtc.h +4
-0@@ -445,6 +447,10 @@ struct drm_crtc {int cursor_x;int cursor_y; +/* hotspot of cursor */ +int hot_x; +int hot_y; +bool enabled;
Quoted 9 lines
Quoted 8 lines
include/drm/drm_crtc.h +0
-0/* Requested mode from modesetting. */ Signature · 6 lines
2.6.3.462.gbe2c914 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 47 lines · John Keeping
Quoted 32 lines · Ville Syrjälä
Quoted 31 lines · John Keeping
The request's
hot_xandhot_yare set correctly for bothDRM_IOCTL_MODE_CURSORandDRM_IOCTL_MODE_CURSOR2so we just need to save the values and then apply the offset to the cursor plane when the cursor moves.Signed-off-by John Keeping <[email protected]>---
v2:
- add kerneldoc forhot_xandhot_yin structdrm_crtcdrivers/gpu/drm/drm_crtc.c | 11 +++++++---- include/drm/drm_crtc.h | 6 ++++++ 2 files changed, 13 insertions(+), 4 deletions(-)drivers/gpu/drm/drm_crtc.c +0
-0@@ -2831,6 +2831,9 @@ static int drm_mode_cursor_universal(struct
drm_crtc*crtc,DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n"); returnPTR_ERR(fb);drivers/gpu/drm/drm_crtc.c +3
-0} + + crtc->hot_x = req->hot_x; + crtc->hot_y = req->hot_y; }else { fb =NULL ; }@@ -2841,11 +2844,11 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc, }Quoted 12 lines
drivers/gpu/drm/drm_crtc.c static int drm_mode_cursor_universal(struct drm_crtc *crtc, · line 2851
Quoted 10 lines
drivers/gpu/drm/drm_crtc.c +4
-4if (req->flags &DRM_MODE_CURSOR_MOVE ) { - crtc_x = req->x; - crtc_y = req->y; + crtc_x = req->x - crtc->hot_x; + crtc_y = req->y - crtc->hot_y; }else { - crtc_x = crtc->cursor_x; - crtc_y = crtc->cursor_y; + crtc_x = crtc->cursor_x - crtc->hot_x; + crtc_y = crtc->cursor_y - crtc->hot_y;Why does the location of the hotspot affect the plane position?
Quoted 3 lines
hot_{x,y} specify the location of the active pixel within the cursor plane and cursor_{x,y} specify the location of the active pixel on the display
Does it? Impossible to say without docs, or some reference to the canonical implementation. Looking at the logs, I guess qxl was the first to get hotspot support. Unfortunately looking at the qxl driver isn't much help. But at leeast it seems to just pass the x/y and hot_x/y straight through without offsetting anything.
Quoted 42 lines
so we need to offset the plane position in order for the active pixel to be in the correct place.
Quoted 39 lines
Quoted 38 lines
drivers/gpu/drm/drm_crtc.c +0
-0}if (fb) {include/drm/drm_crtc.h +0
-0@@ -404,6 +404,8 @@ struct drm_crtc_funcs {* @cursor: cursor plane for this CRTC * @cursor_x: current x position of the cursor, used for universal cursor planes
* @cursor_y: current y position of the cursor, used for universal
cursor planes
+ * @hot_x: x-coordinate of cursor hotspot, used for universal cursor planes
+ * @hot_y: y-coordinate of cursor hotspot, used for universal cursor planes
* @enabled: is this CRTC enabled?
* @mode: current mode timings
* @hwmode: mode timings as programmed to hw regsinclude/drm/drm_crtc.h +4
-0@@ -445,6 +447,10 @@ struct drm_crtc {int cursor_x;int cursor_y; +/* hotspot of cursor */ +int hot_x; +int hot_y; +bool enabled;/* Requested mode from modesetting. */ Signature · 6 lines
2.6.3.462.gbe2c914 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Signature · 2 lines
Ville Syrjälä Intel OTC
Quoted 47 lines · John Keeping
Quoted 32 lines · Ville Syrjälä
Quoted 31 lines · John Keeping
The request's
hot_xandhot_yare set correctly for bothDRM_IOCTL_MODE_CURSORandDRM_IOCTL_MODE_CURSOR2so we just need to save the values and then apply the offset to the cursor plane when the cursor moves.Signed-off-by John Keeping <[email protected]>---
v2:
- add kerneldoc forhot_xandhot_yin structdrm_crtcdrivers/gpu/drm/drm_crtc.c | 11 +++++++---- include/drm/drm_crtc.h | 6 ++++++ 2 files changed, 13 insertions(+), 4 deletions(-)drivers/gpu/drm/drm_crtc.c +0
-0@@ -2831,6 +2831,9 @@ static int drm_mode_cursor_universal(struct
drm_crtc*crtc,DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n"); returnPTR_ERR(fb);drivers/gpu/drm/drm_crtc.c +3
-0} + + crtc->hot_x = req->hot_x; + crtc->hot_y = req->hot_y; }else { fb =NULL ; }@@ -2841,11 +2844,11 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc, }Quoted 12 lines
drivers/gpu/drm/drm_crtc.c static int drm_mode_cursor_universal(struct drm_crtc *crtc, · line 2851
Quoted 10 lines
drivers/gpu/drm/drm_crtc.c +4
-4if (req->flags &DRM_MODE_CURSOR_MOVE ) { - crtc_x = req->x; - crtc_y = req->y; + crtc_x = req->x - crtc->hot_x; + crtc_y = req->y - crtc->hot_y; }else { - crtc_x = crtc->cursor_x; - crtc_y = crtc->cursor_y; + crtc_x = crtc->cursor_x - crtc->hot_x; + crtc_y = crtc->cursor_y - crtc->hot_y;Why does the location of the hotspot affect the plane position?
Quoted 4 lines
hot_{x,y} specify the location of the active pixel within the cursor plane and cursor_{x,y} specify the location of the active pixel on the display so we need to offset the plane position in order for the active pixel to be in the correct place.
Nope, hot_x/y is just for virtual machines to indicate where the logical cursor position is within the cursor plane. It should have 2 effect on how something is displayed. And no, I have absolutely no idea why radeon is pulling some tricks here, which have been added in
commit 78b1a6010b46a69bcd47b723a80f92693f26d17b
Author: Michel Dänzer <[email protected]> Date: Tue Nov 18 18:00:08 2014 +0900
drm/radeon: Use cursor_set2 hook for enabling / disabling the HW cursor
Michel/Alex, can you please shed some light onto this? radeon is the only driver doing this, making this interface inconsistent. Is the ddx doing something funny compared to -modeseting or weston?
At least a quick look in the -ati sources didn't even show a user for this, it's still using the old cursor ioctl. And there's no other indication in the commit of a bug or anything. Can we perhaps just revert this?
Cheers, Daniel
Quoted 44 lines
Quoted 31 lines
Quoted 31 lines
drivers/gpu/drm/drm_crtc.c +0
-0}if (fb) {include/drm/drm_crtc.h +0
-0@@ -404,6 +404,8 @@ struct drm_crtc_funcs {* @cursor: cursor plane for this CRTC * @cursor_x: current x position of the cursor, used for universal cursor planes
* @cursor_y: current y position of the cursor, used for universal
cursor planes
+ * @hot_x: x-coordinate of cursor hotspot, used for universal cursor planes
+ * @hot_y: y-coordinate of cursor hotspot, used for universal cursor planes
* @enabled: is this CRTC enabled?
* @mode: current mode timings
* @hwmode: mode timings as programmed to hw regsinclude/drm/drm_crtc.h +4
-0@@ -445,6 +447,10 @@ struct drm_crtc {int cursor_x;int cursor_y; +/* hotspot of cursor */ +int hot_x; +int hot_y; +bool enabled;Quoted 9 lines
Quoted 8 lines
include/drm/drm_crtc.h +0
-0/* Requested mode from modesetting. */ Signature · 6 lines
2.6.3.462.gbe2c914 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 48 lines · Daniel Vetter
Quoted 47 lines · John Keeping
Quoted 44 lines · Ville Syrjälä
Quoted 31 lines · John Keeping
The request's
hot_xandhot_yare set correctly for bothDRM_IOCTL_MODE_CURSORandDRM_IOCTL_MODE_CURSOR2so we just need to save the values and then apply the offset to the cursor plane when the cursor moves.Signed-off-by John Keeping <[email protected]>---
v2:
- add kerneldoc forhot_xandhot_yin structdrm_crtcdrivers/gpu/drm/drm_crtc.c | 11 +++++++---- include/drm/drm_crtc.h | 6 ++++++ 2 files changed, 13 insertions(+), 4 deletions(-)(quoted diff) +0
-0
b/drivers/gpu/drm/drm_crtc.cindex 720a153..40f5b84 100644drivers/gpu/drm/drm_crtc.c +0
-0@@ -2831,6 +2831,9 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc,
DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n"); returnPTR_ERR(fb); }drivers/gpu/drm/drm_crtc.c +3
-0+ + crtc->hot_x = req->hot_x; + crtc->hot_y = req->hot_y; }else { fb =NULL ; }@@ -2841,11 +2844,11 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc, }drivers/gpu/drm/drm_crtc.c static int · line 2851
Quoted 10 lines
drivers/gpu/drm/drm_crtc.c +4
-4if (req->flags &DRM_MODE_CURSOR_MOVE ) { - crtc_x = req->x; - crtc_y = req->y; + crtc_x = req->x - crtc->hot_x; + crtc_y = req->y - crtc->hot_y; }else { - crtc_x = crtc->cursor_x; - crtc_y = crtc->cursor_y; + crtc_x = crtc->cursor_x - crtc->hot_x; + crtc_y = crtc->cursor_y - crtc->hot_y;Why does the location of the hotspot affect the plane position?
Quoted 8 lines
Quoted 4 lines
hot_{x,y} specify the location of the active pixel within the cursor plane and cursor_{x,y} specify the location of the active pixel on the display so we need to offset the plane position in order for the active pixel to be in the correct place.
Nope, hot_x/y is just for virtual machines to indicate where the logical cursor position is within the cursor plane. It should have 2 effect on how something is displayed.
Hmm... I've run the same client code on QXL and Rockchip (which uses universal planes) and without this patch the behaviour is just plain wrong on Rockchip.
With a 32x32 cursor with the hotspot in the bottom-right using:
drmModeSetCursor2(..., 0, 32)
drmModeMoveCursor(..., x, y)
then with QXL when I click I get an event at (x, y) and this is precisely under the bottom-right of the cursor.
With Rockchip the click appears to happen at the top-left of the cursor (as if the hotspot were (0, 0)). This patch makes the behaviour match that on QXL.
I can't see how the hotspot can be ignored here unless you're saying that the client code needs to offset the cursor position by the hotspot, but in that case it will quite clearly be wrong on QXL.
Quoted 71 lines · John Keeping
Quoted 48 lines · Daniel Vetter
Quoted 47 lines · John Keeping
Quoted 44 lines · Ville Syrjälä
Quoted 31 lines · John Keeping
The request's
hot_xandhot_yare set correctly for bothDRM_IOCTL_MODE_CURSORandDRM_IOCTL_MODE_CURSOR2so we just need to save the values and then apply the offset to the cursor plane when the cursor moves.Signed-off-by John Keeping <[email protected]>---
v2:
- add kerneldoc forhot_xandhot_yin structdrm_crtcdrivers/gpu/drm/drm_crtc.c | 11 +++++++---- include/drm/drm_crtc.h | 6 ++++++ 2 files changed, 13 insertions(+), 4 deletions(-)(quoted diff) +0
-0
b/drivers/gpu/drm/drm_crtc.cindex 720a153..40f5b84 100644drivers/gpu/drm/drm_crtc.c +0
-0@@ -2831,6 +2831,9 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc,
DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n"); returnPTR_ERR(fb); }drivers/gpu/drm/drm_crtc.c +3
-0+ + crtc->hot_x = req->hot_x; + crtc->hot_y = req->hot_y; }else { fb =NULL ; }@@ -2841,11 +2844,11 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc, }drivers/gpu/drm/drm_crtc.c static int · line 2851
Quoted 10 lines
drivers/gpu/drm/drm_crtc.c +4
-4if (req->flags &DRM_MODE_CURSOR_MOVE ) { - crtc_x = req->x; - crtc_y = req->y; + crtc_x = req->x - crtc->hot_x; + crtc_y = req->y - crtc->hot_y; }else { - crtc_x = crtc->cursor_x; - crtc_y = crtc->cursor_y; + crtc_x = crtc->cursor_x - crtc->hot_x; + crtc_y = crtc->cursor_y - crtc->hot_y;Why does the location of the hotspot affect the plane position?
Quoted 8 lines
Quoted 4 lines
hot_{x,y} specify the location of the active pixel within the cursor plane and cursor_{x,y} specify the location of the active pixel on the display so we need to offset the plane position in order for the active pixel to be in the correct place.
Nope, hot_x/y is just for virtual machines to indicate where the logical cursor position is within the cursor plane. It should have 2 effect on how something is displayed.
Hmm... I've run the same client code on QXL and Rockchip (which uses universal planes) and without this patch the behaviour is just plain wrong on Rockchip.
With a 32x32 cursor with the hotspot in the bottom-right using:
drmModeSetCursor2(..., 0, 32)
drmModeMoveCursor(..., x, y)then with QXL when I click I get an event at (x, y) and this is precisely under the bottom-right of the cursor.
Quoted 7 lines
With Rockchip the click appears to happen at the top-left of the cursor (as if the hotspot were (0, 0)). This patch makes the behaviour match that on QXL.
I can't see how the hotspot can be ignored here unless you're saying that the client code needs to offset the cursor position by the hotspot, but in that case it will quite clearly be wrong on QXL.
I checked a bunch of X drivers and none of them adjust for the hotspot. Also i915.ko always used x/y directly and never adjusted for the hotspot. And as far as generic kms interfaces go i915 is pretty much the standard, and that is what's been implemented in universal planes.
The only exception really seems to be radeon.ko, which does adjust the x/y position of the cursor in the crtc space like your patch does above.
How can I test cursor hotspots? In the end we want a) something consistent
b) that doesn't break existing code and unfortunately b) trumps a). So I'd like to figure out what's going on on the amd/intel hw I have here. -Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 80 lines · Daniel Vetter
Quoted 71 lines · John Keeping
Quoted 48 lines · Daniel Vetter
Quoted 47 lines · John Keeping
Quoted 44 lines · Ville Syrjälä
Quoted 31 lines · John Keeping
The request's
hot_xandhot_yare set correctly for bothDRM_IOCTL_MODE_CURSORandDRM_IOCTL_MODE_CURSOR2so we just need to save the values and then apply the offset to the cursor plane when the cursor moves.Signed-off-by John Keeping <[email protected]>---
v2:
- add kerneldoc forhot_xandhot_yin structdrm_crtcdrivers/gpu/drm/drm_crtc.c | 11 +++++++---- include/drm/drm_crtc.h | 6 ++++++ 2 files changed, 13 insertions(+), 4 deletions(-)(quoted diff) +0
-0
b/drivers/gpu/drm/drm_crtc.cindex 720a153..40f5b84 100644drivers/gpu/drm/drm_crtc.c +0
-0@@ -2831,6 +2831,9 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc,
DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n"); returnPTR_ERR(fb); }drivers/gpu/drm/drm_crtc.c +3
-0+ + crtc->hot_x = req->hot_x; + crtc->hot_y = req->hot_y; }else { fb =NULL ; }@@ -2841,11 +2844,11 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc, }drivers/gpu/drm/drm_crtc.c static int · line 2851
Quoted 10 lines
drivers/gpu/drm/drm_crtc.c +4
-4if (req->flags &DRM_MODE_CURSOR_MOVE ) { - crtc_x = req->x; - crtc_y = req->y; + crtc_x = req->x - crtc->hot_x; + crtc_y = req->y - crtc->hot_y; }else { - crtc_x = crtc->cursor_x; - crtc_y = crtc->cursor_y; + crtc_x = crtc->cursor_x - crtc->hot_x; + crtc_y = crtc->cursor_y - crtc->hot_y;Why does the location of the hotspot affect the plane position?
Quoted 8 lines
Quoted 4 lines
hot_{x,y} specify the location of the active pixel within the cursor plane and cursor_{x,y} specify the location of the active pixel on the display so we need to offset the plane position in order for the active pixel to be in the correct place.
Nope, hot_x/y is just for virtual machines to indicate where the logical cursor position is within the cursor plane. It should have 2 effect on how something is displayed.
Hmm... I've run the same client code on QXL and Rockchip (which uses universal planes) and without this patch the behaviour is just plain wrong on Rockchip.
With a 32x32 cursor with the hotspot in the bottom-right using:
drmModeSetCursor2(..., 0, 32)
drmModeMoveCursor(..., x, y)then with QXL when I click I get an event at (x, y) and this is precisely under the bottom-right of the cursor.
Quoted 7 lines
With Rockchip the click appears to happen at the top-left of the cursor (as if the hotspot were (0, 0)). This patch makes the behaviour match that on QXL.
I can't see how the hotspot can be ignored here unless you're saying that the client code needs to offset the cursor position by the hotspot, but in that case it will quite clearly be wrong on QXL.
Quoted 7 lines
I checked a bunch of X drivers and none of them adjust for the hotspot. Also i915.ko always used x/y directly and never adjusted for the hotspot. And as far as generic kms interfaces go i915 is pretty much the standard, and that is what's been implemented in universal planes.
The only exception really seems to be radeon.ko, which does adjust the x/y position of the cursor in the crtc space like your patch does above.
radeon hw has had the hotspot register since r5xx.
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/gpu/drm/radeon/radeon_cursor.c#n204
amdgpu programs it as well:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c#n2440
Alex
Quoted 9 lines
How can I test cursor hotspots? In the end we want a) something consistent
b) that doesn't break existing code and unfortunately b) trumps a). So I'd like to figure out what's going on on the amd/intel hw I have here. -Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 64 lines · Daniel Vetter
Quoted 47 lines · John Keeping
Quoted 32 lines · Ville Syrjälä
Quoted 31 lines · John Keeping
The request's
hot_xandhot_yare set correctly for bothDRM_IOCTL_MODE_CURSORandDRM_IOCTL_MODE_CURSOR2so we just need to save the values and then apply the offset to the cursor plane when the cursor moves.Signed-off-by John Keeping <[email protected]>---
v2:
- add kerneldoc forhot_xandhot_yin structdrm_crtcdrivers/gpu/drm/drm_crtc.c | 11 +++++++---- include/drm/drm_crtc.h | 6 ++++++ 2 files changed, 13 insertions(+), 4 deletions(-)drivers/gpu/drm/drm_crtc.c +0
-0@@ -2831,6 +2831,9 @@ static int drm_mode_cursor_universal(struct
drm_crtc*crtc, DRM_DEBUG_KMS("failed to wrap cursor buffer in drmframebuffer\n"); return PTR_ERR(fb); }drivers/gpu/drm/drm_crtc.c +3
-0+ + crtc->hot_x = req->hot_x; + crtc->hot_y = req->hot_y; }else { fb =NULL ; }@@ -2841,11 +2844,11 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc, }Quoted 12 lines
drivers/gpu/drm/drm_crtc.c static int drm_mode_cursor_universal(struct drm_crtc *crtc, · line 2851
Quoted 10 lines
drivers/gpu/drm/drm_crtc.c +4
-4if (req->flags &DRM_MODE_CURSOR_MOVE ) { - crtc_x = req->x; - crtc_y = req->y; + crtc_x = req->x - crtc->hot_x; + crtc_y = req->y - crtc->hot_y; }else { - crtc_x = crtc->cursor_x; - crtc_y = crtc->cursor_y; + crtc_x = crtc->cursor_x - crtc->hot_x; + crtc_y = crtc->cursor_y - crtc->hot_y;Why does the location of the hotspot affect the plane position?
Quoted 4 lines
hot_{x,y} specify the location of the active pixel within the cursor plane and cursor_{x,y} specify the location of the active pixel on the display so we need to offset the plane position in order for the active pixel to be in the correct place.
Nope, hot_x/y is just for virtual machines to indicate where the logical cursor position is within the cursor plane. It should have 2 effect on how something is displayed. And no, I have absolutely no idea why radeon is pulling some tricks here, which have been added in
commit
78b1a6010b46a69bcd47b723a80f92693f26d17bAuthor: Michel Dänzer <[email protected]> Date: Tue Nov 18 18:00:08 2014 +0900drm/radeon: Use
cursor_set2hook for enabling / disabling the HW cursor
Quoted 8 lines
Michel/Alex, can you please shed some light onto this? radeon is the only driver doing this, making this interface inconsistent. Is the ddx doing something funny compared to -modeseting or weston?
At least a quick look in the -ati sources didn't even show a user for this, it's still using the old cursor ioctl. And there's no other indication in the commit of a bug or anything. Can we perhaps just revert this?
We use this is xf86-video-ati. See:
http://cgit.freedesktop.org/xorg/driver/xf86-video-ati/commit/?id=c9f8f642fd495937400618a4fc25ecae3f8888fc
Our hw cursor has a hotspot register that needs to be programmed for proper operation. I don't remember the details of the specific bug. Michel can provide more info.
Alex
Quoted 48 lines
Cheers, Daniel
Quoted 40 lines
Quoted 31 lines
Quoted 31 lines
drivers/gpu/drm/drm_crtc.c +0
-0}if (fb) {include/drm/drm_crtc.h +0
-0@@ -404,6 +404,8 @@ struct drm_crtc_funcs {* @cursor: cursor plane for this CRTC * @cursor_x: current x position of the cursor, used for universal cursor planes
* @cursor_y: current y position of the cursor, used for universal
cursor planes
+ * @hot_x: x-coordinate of cursor hotspot, used for universal cursor planes
+ * @hot_y: y-coordinate of cursor hotspot, used for universal cursor planes
* @enabled: is this CRTC enabled?
* @mode: current mode timings
* @hwmode: mode timings as programmed to hw regsinclude/drm/drm_crtc.h +4
-0@@ -445,6 +447,10 @@ struct drm_crtc {int cursor_x;int cursor_y; +/* hotspot of cursor */ +int hot_x; +int hot_y; +bool enabled;Quoted 9 lines
Quoted 8 lines
include/drm/drm_crtc.h +0
-1/* Requested mode from modesetting. */ --2.6.3.462.gbe2c914
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-develQuoted 4 lines
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 4 lines
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 74 lines · Alex Deucher
Quoted 64 lines · Daniel Vetter
Quoted 47 lines · John Keeping
Quoted 32 lines · Ville Syrjälä
Quoted 31 lines · John Keeping
The request's
hot_xandhot_yare set correctly for bothDRM_IOCTL_MODE_CURSORandDRM_IOCTL_MODE_CURSOR2so we just need to save the values and then apply the offset to the cursor plane when the cursor moves.Signed-off-by John Keeping <[email protected]>---
v2:
- add kerneldoc forhot_xandhot_yin structdrm_crtcdrivers/gpu/drm/drm_crtc.c | 11 +++++++---- include/drm/drm_crtc.h | 6 ++++++ 2 files changed, 13 insertions(+), 4 deletions(-)drivers/gpu/drm/drm_crtc.c +0
-0@@ -2831,6 +2831,9 @@ static int drm_mode_cursor_universal(struct
drm_crtc*crtc, DRM_DEBUG_KMS("failed to wrap cursor buffer in drmframebuffer\n"); return PTR_ERR(fb); }drivers/gpu/drm/drm_crtc.c +3
-0+ + crtc->hot_x = req->hot_x; + crtc->hot_y = req->hot_y; }else { fb =NULL ; }@@ -2841,11 +2844,11 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc, }Quoted 12 lines
drivers/gpu/drm/drm_crtc.c static int drm_mode_cursor_universal(struct drm_crtc *crtc, · line 2851
Quoted 10 lines
drivers/gpu/drm/drm_crtc.c +4
-4if (req->flags &DRM_MODE_CURSOR_MOVE ) { - crtc_x = req->x; - crtc_y = req->y; + crtc_x = req->x - crtc->hot_x; + crtc_y = req->y - crtc->hot_y; }else { - crtc_x = crtc->cursor_x; - crtc_y = crtc->cursor_y; + crtc_x = crtc->cursor_x - crtc->hot_x; + crtc_y = crtc->cursor_y - crtc->hot_y;Why does the location of the hotspot affect the plane position?
Quoted 4 lines
hot_{x,y} specify the location of the active pixel within the cursor plane and cursor_{x,y} specify the location of the active pixel on the display so we need to offset the plane position in order for the active pixel to be in the correct place.
Nope, hot_x/y is just for virtual machines to indicate where the logical cursor position is within the cursor plane. It should have 2 effect on how something is displayed. And no, I have absolutely no idea why radeon is pulling some tricks here, which have been added in
commit
78b1a6010b46a69bcd47b723a80f92693f26d17bAuthor: Michel Dänzer <[email protected]> Date: Tue Nov 18 18:00:08 2014 +0900drm/radeon: Use
cursor_set2hook for enabling / disabling the HW cursorQuoted 8 lines
Michel/Alex, can you please shed some light onto this? radeon is the only driver doing this, making this interface inconsistent. Is the ddx doing something funny compared to -modeseting or weston?
At least a quick look in the -ati sources didn't even show a user for this, it's still using the old cursor ioctl. And there's no other indication in the commit of a bug or anything. Can we perhaps just revert this?
Quoted 5 lines
We use this is xf86-video-ati. See:
http://cgit.freedesktop.org/xorg/driver/xf86-video-ati/commit/?id=c9f8f642fd495937400618a4fc25ecae3f8888fc
Our hw cursor has a hotspot register that needs to be programmed for proper operation. I don't remember the details of the specific bug. Michel can provide more info.
Yeah I was blind and didn't spot this. But I can't find your hotspot cursor reg - it's only used to adjust the x/y offsets (similar to John's patch). And amdgpu doesn't do this at all, it's only radoen.ko. Still confused.
-Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 86 lines · Daniel Vetter
Quoted 79 lines · Alex Deucher
Quoted 72 lines · Daniel Vetter
Quoted 48 lines · John Keeping
Quoted 32 lines · Ville Syrjälä
Quoted 31 lines · John Keeping
The request's
hot_xandhot_yare set correctly for bothDRM_IOCTL_MODE_CURSORandDRM_IOCTL_MODE_CURSOR2so we just need to save the values and then apply the offset to the cursor plane when the cursor moves.Signed-off-by John Keeping <[email protected]>---
v2:
- add kerneldoc forhot_xandhot_yin structdrm_crtcdrivers/gpu/drm/drm_crtc.c | 11 +++++++---- include/drm/drm_crtc.h | 6 ++++++ 2 files changed, 13 insertions(+), 4 deletions(-)(quoted diff) +0
-0
b/drivers/gpu/drm/drm_crtc.cindex 720a153..40f5b84 100644drivers/gpu/drm/drm_crtc.c +0
-0@@ -2831,6 +2831,9 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc,
DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n"); returnPTR_ERR(fb); }drivers/gpu/drm/drm_crtc.c +3
-0+ + crtc->hot_x = req->hot_x; + crtc->hot_y = req->hot_y; }else { fb =NULL ; }@@ -2841,11 +2844,11 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc, }Quoted 13 lines
drivers/gpu/drm/drm_crtc.c static int drm_mode_cursor_universal(struct drm_crtc *crtc, · line 2851
Quoted 10 lines
drivers/gpu/drm/drm_crtc.c +4
-4if (req->flags &DRM_MODE_CURSOR_MOVE ) { - crtc_x = req->x; - crtc_y = req->y; + crtc_x = req->x - crtc->hot_x; + crtc_y = req->y - crtc->hot_y; }else { - crtc_x = crtc->cursor_x; - crtc_y = crtc->cursor_y; + crtc_x = crtc->cursor_x - crtc->hot_x; + crtc_y = crtc->cursor_y - crtc->hot_y;Why does the location of the hotspot affect the plane position?
Quoted 4 lines
hot_{x,y} specify the location of the active pixel within the cursor plane and cursor_{x,y} specify the location of the active pixel on the display so we need to offset the plane position in order for the active pixel to be in the correct place.
Nope, hot_x/y is just for virtual machines to indicate where the logical cursor position is within the cursor plane. It should have 2 effect on how something is displayed. And no, I have absolutely no idea why radeon is pulling some tricks here, which have been added in
commit
78b1a6010b46a69bcd47b723a80f92693f26d17bAuthor: Michel Dänzer <[email protected]> Date: Tue Nov 18 18:00:08 2014 +0900drm/radeon: Use
cursor_set2hook for enabling / disabling the
HW cursorMichel/Alex, can you please shed some light onto this? radeon is the only driver doing this, making this interface inconsistent. Is the ddx doing something funny compared to -modeseting or weston?
Quoted 4 lines
At least a quick look in the -ati sources didn't even show a user for this, it's still using the old cursor ioctl. And there's no other indication in the commit of a bug or anything. Can we perhaps just revert this?
Quoted 5 lines
We use this is xf86-video-ati. See:
http://cgit.freedesktop.org/xorg/driver/xf86-video-ati/commit/?id=c9f8f642fd495937400618a4fc25ecae3f8888fc
Our hw cursor has a hotspot register that needs to be programmed for proper operation. I don't remember the details of the specific bug. Michel can provide more info.
Quoted 4 lines
Yeah I was blind and didn't spot this. But I can't find your hotspot cursor reg - it's only used to adjust the x/y offsets (similar to John's patch). And amdgpu doesn't do this at all, it's only radoen.ko. Still confused.
Having investigated a bit more, I think xserver handles the hotspot itself without using the kernel hotspot handling and xorg-video-qxl carefully reverses this in order to take advantage of drmModeSetCursor2(), so with X11 drivers you don't notice that the kernel handling of this is broken in nearly all drivers.
Here's a small test program that demonstrates whether or not cursor hotspots work. There should be a single colored pixel immediately to the left of the pointer but with a broken driver the white pixel will be 64 pixels to the left of the pointer.
Compile with:
cc -o test -I/usr/include/libdrm test.c -lkms -ldrm
-- >8 --
#include <err.h>
#include <poll.h>
#include <string.h>
#include <sys/mman.h>
#include <libkms/libkms.h>
#include <xf86drm.h>
#include <xf86drmMode.h>
static int drm_fd;
static int crtc_id = -1;
static drmModeModeInfo mode_info;
static struct kms_driver *kms;
static struct {
int id;
size_t size;
unsigned char *data;
} framebuffer;static struct {
int x, y;
struct kms_bo *buffer;
} cursor;#define CURSOR_WIDTH 21
#define CURSOR_HEIGHT 21
#define CURSOR_HOT_X 21
#define CURSOR_HOT_Y 0
unsigned char cursor_data[] =
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\377\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\0\0\0\377\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377" "\377\377\377\377\377\377\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377\377\377\377\377\377" "\377\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377" "\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\377" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377" "\377\377\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\377\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377\377\377\377" "\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\377\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377\377\377\377\377" "\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377" "\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377\377\377\377" "\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377" "\377\377\377\377\377\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377" "\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377" "\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\377\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\0\0" "\0\377\0\0\0\377\0\0\0\377\0\0\0\377\377\377\377\377\377\377\377\377\377" "\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\377\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377\377\377" "\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\377" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377\377\377" "\0\0\0\377\0\0\0\377\377\377\377\377\377\377\377\377\0\0\0\377\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377\377\377\0\0\0\377\0\0\0" "\0\0\0\0\0\0\0\0\377\377\377\377\377\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\377\377\377\377\377\377\377\377\377\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\377\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377" "\377\377\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377\377\377\0\0\0\377\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377" "\377\377\377\377\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\377\0\0\0\377\377\377\377\377\0\0\0\377\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0";
static void draw_cursor(void)
{
void *result;
unsigned char *ptr;
int x, y;
if (kms_bo_map(cursor.buffer, &result))
err(1, "kms_bo_map");
ptr = result;
memset(ptr, 0, 64 * 64 * 4);
for (y = 0; y < CURSOR_HEIGHT; y++)
memcpy(ptr + 64 * 4 * y, cursor_data + 4 * CURSOR_WIDTH * y, CURSOR_WIDTH * 4);
kms_bo_unmap(cursor.buffer);
}static void setup_cursor(void)
{
const unsigned int attr[] = {
KMS_BO_TYPE, KMS_BO_TYPE_CURSOR_64X64_A8R8G8B8,
KMS_WIDTH, 64,
KMS_HEIGHT, 64,
KMS_TERMINATE_PROP_LIST
};
unsigned int handle;
if (kms_bo_create(kms, attr, &cursor.buffer))
err(1, "kms_bo_create");
draw_cursor();
if (kms_bo_get_prop(cursor.buffer, KMS_HANDLE, &handle))
err(1, "kms_bo_get_prop");
if (drmModeSetCursor2(drm_fd, crtc_id, handle, 64, 64, CURSOR_HOT_X, CURSOR_HOT_Y))
err(1, "drmModeSetCursor2");
if (drmModeMoveCursor(drm_fd, crtc_id, cursor.x, cursor.y))
err(1, "drmModeMoveCursor");
}static void create_framebuffer(void)
{
struct drm_mode_create_dumb creq = {
.width = mode_info.hdisplay,
.height = mode_info.vdisplay,
.bpp = 32,
.flags = 0,
};
struct drm_mode_map_dumb mreq = { 0 };
if (drmIoctl(drm_fd, DRM_IOCTL_MODE_CREATE_DUMB, &creq))
err(1, "DRM_IOCTL_MODE_CREATE_DUMB");
if (drmModeAddFB(drm_fd, creq.width, creq.height, 24, 32, creq.pitch, creq.handle, &framebuffer.id))
err(1, "drmModeAddFB");
mreq.handle = creq.handle;
if (drmIoctl(drm_fd, DRM_IOCTL_MODE_MAP_DUMB, &mreq))
err(1, "DRM_IOCTL_MODE_MAP_DUMB");
framebuffer.data = mmap(0, creq.size, PROT_READ | PROT_WRITE, MAP_SHARED, drm_fd, mreq.offset);
if (framebuffer.data == MAP_FAILED)
err(1, "mmap");
framebuffer.size = creq.size;
memset(framebuffer.data, 0, framebuffer.size);
/* Paint cursor location with a single colored pixel. */
framebuffer.data[1 + cursor.x * 4 + cursor.y * creq.pitch] = '\xff';
framebuffer.data[2 + cursor.x * 4 + cursor.y * creq.pitch] = '\xff';
}static int setup_connector(drmModeConnector *conn, drmModeRes *res)
{
drmModeModeInfo *mode = NULL;
int i;
if (conn->connection != DRM_MODE_CONNECTED)
return -1;
for (int j = 0; j < conn->count_modes; j++) {
if (!mode || (conn->modes[j].type & DRM_MODE_TYPE_PREFERRED)) {
mode = &conn->modes[j];
if (conn->modes[j].type & DRM_MODE_TYPE_PREFERRED)
break;
}
}
if (!mode)
return -1;
for (i = 0; i < conn->count_encoders; i++) {
int j;
drmModeEncoder *enc = drmModeGetEncoder(drm_fd, conn->encoders[j]);
if (!enc)
continue;
for (j = 0; j < res->count_crtcs; j++) {
if (enc->possible_crtcs & (1u << j)) {
crtc_id = res->crtcs[j];
break;
}
}
drmModeFreeEncoder(enc);
if (crtc_id >= 0)
break;
}
memcpy(&mode_info, mode, sizeof(mode_info));
cursor.x = mode->hdisplay / 2;
cursor.y = mode->vdisplay / 2;
create_framebuffer();
if (drmModeSetCrtc(drm_fd, crtc_id, framebuffer.id, 0, 0, &conn->connector_id, 1, mode))
err(1, "drmModeSetCrtc");
return 0;
}static void setup_screen(drmModeRes *res)
{
int i;
for (i = 0; i < res->count_connectors; i++) {
int result;
drmModeConnector *conn = drmModeGetConnector(drm_fd, res->connectors[i]);
if (!conn)
continue;
result = setup_connector(conn, res);
drmModeFreeConnector(conn);
if (!result)
break;
}
if (crtc_id < 0)
errx(1, "no screen found");
}static void setup_drm(const char *module)
{
drmModeRes *res;
drm_fd = drmOpen(module, NULL);
if (drm_fd < 0)
err(1, "drmOpen");
if (kms_create(drm_fd, &kms) < 0)
err(1, "kms_create");
res = drmModeGetResources(drm_fd);
if (!res)
err(1, "drmModeGetResources");
setup_screen(res);
}static void wait_for_input(void)
{
struct pollfd pfd = {
.fd = 0,
.events = POLLIN,
};
poll(&pfd, 1, -1);
}int main(int argc, char *argv[])
{
const char *module = "qxl";
if (argc > 1)
module = argv[1];
setup_drm(module);
setup_cursor();
wait_for_input();
return 0;
}_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 93 lines · John Keeping
Quoted 86 lines · Daniel Vetter
Quoted 79 lines · Alex Deucher
Quoted 72 lines · Daniel Vetter
Quoted 48 lines · John Keeping
Quoted 32 lines · Ville Syrjälä
Quoted 31 lines · John Keeping
The request's
hot_xandhot_yare set correctly for bothDRM_IOCTL_MODE_CURSORandDRM_IOCTL_MODE_CURSOR2so we just need to save the values and then apply the offset to the cursor plane when the cursor moves.Signed-off-by John Keeping <[email protected]>---
v2:
- add kerneldoc forhot_xandhot_yin structdrm_crtcdrivers/gpu/drm/drm_crtc.c | 11 +++++++---- include/drm/drm_crtc.h | 6 ++++++ 2 files changed, 13 insertions(+), 4 deletions(-)(quoted diff) +0
-0
b/drivers/gpu/drm/drm_crtc.cindex 720a153..40f5b84 100644drivers/gpu/drm/drm_crtc.c +0
-0@@ -2831,6 +2831,9 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc,
DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n"); returnPTR_ERR(fb); }drivers/gpu/drm/drm_crtc.c +3
-0+ + crtc->hot_x = req->hot_x; + crtc->hot_y = req->hot_y; }else { fb =NULL ; }@@ -2841,11 +2844,11 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc, }Quoted 13 lines
drivers/gpu/drm/drm_crtc.c static int · line 2851
Quoted 10 lines
drivers/gpu/drm/drm_crtc.c +4
-4if (req->flags &DRM_MODE_CURSOR_MOVE ) { - crtc_x = req->x; - crtc_y = req->y; + crtc_x = req->x - crtc->hot_x; + crtc_y = req->y - crtc->hot_y; }else { - crtc_x = crtc->cursor_x; - crtc_y = crtc->cursor_y; + crtc_x = crtc->cursor_x - crtc->hot_x; + crtc_y = crtc->cursor_y - crtc->hot_y;Why does the location of the hotspot affect the plane position?
Quoted 4 lines
hot_{x,y} specify the location of the active pixel within the cursor plane and cursor_{x,y} specify the location of the active pixel on the display so we need to offset the plane position in order for the active pixel to be in the correct place.
Nope, hot_x/y is just for virtual machines to indicate where the logical cursor position is within the cursor plane. It should have 2 effect on how something is displayed. And no, I have absolutely no idea why radeon is pulling some tricks here, which have been added in
commit
78b1a6010b46a69bcd47b723a80f92693f26d17bAuthor: Michel Dänzer <[email protected]> Date: Tue Nov 18 18:00:08 2014 +0900drm/radeon: Use
cursor_set2hook for enabling / disabling the
HW cursorMichel/Alex, can you please shed some light onto this? radeon is the only driver doing this, making this interface inconsistent. Is the ddx doing something funny compared to -modeseting or weston?
Quoted 4 lines
At least a quick look in the -ati sources didn't even show a user for this, it's still using the old cursor ioctl. And there's no other indication in the commit of a bug or anything. Can we perhaps just revert this?
Quoted 5 lines
We use this is xf86-video-ati. See:
http://cgit.freedesktop.org/xorg/driver/xf86-video-ati/commit/?id=c9f8f642fd495937400618a4fc25ecae3f8888fc
Our hw cursor has a hotspot register that needs to be programmed for proper operation. I don't remember the details of the specific bug. Michel can provide more info.Quoted 4 lines
Yeah I was blind and didn't spot this. But I can't find your hotspot cursor reg - it's only used to adjust the x/y offsets (similar to John's patch). And amdgpu doesn't do this at all, it's only radoen.ko. Still confused.
Quoted 5 lines
Having investigated a bit more, I think xserver handles the hotspot itself without using the kernel hotspot handling and xorg-video-qxl carefully reverses this in order to take advantage of
drmModeSetCursor2(), so with X11 drivers you don't notice that the kernel handling of this is broken in nearly all drivers.
Where did you spot this code in -qxl? Afaics it has the exact same copy of the usual drmmode.c code as everyone else. No adjustments of x/yhot seems to be going on there, nor in the qxl.ko kernel driver. Or at least I didn't find it.
Quoted 4 lines
Here's a small test program that demonstrates whether or not cursor hotspots work. There should be a single colored pixel immediately to the left of the pointer but with a broken driver the white pixel will be 64 pixels to the left of the pointer.
Is there also a way to test this with X? In the end that's what will matter for most end users, and if there's difference in behaviour in the various X drivers we're really screwed (since essentially we can't ever fix it properly for the legacy ioctl).
-Daniel
Quoted 279 lines
Compile with:
cc -o test -I/usr/include/libdrm
test.c-lkms -ldrm-- >8 --
#include <err.h>
#include <poll.h>
#include <string.h>#include <
sys/mman.h>#include <
libkms/libkms.h>
#include <xf86drm.h>
#include <xf86drmMode.h>static int
drm_fd;
static intcrtc_id= -1;
static drmModeModeInfomode_info;
static structkms_driver*kms;static struct { int id; size_t size; unsigned char *data; } framebuffer;static struct { int x, y; struct kms_bo *buffer; } cursor;#define
CURSOR_WIDTH21
#defineCURSOR_HEIGHT21
#defineCURSOR_HOT_X21
#defineCURSOR_HOT_Y0
unsigned char cursor_data[] =
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\377\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\0\0\0\377\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377" "\377\377\377\377\377\377\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377\377\377\377\377\377" "\377\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377" "\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\377" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377" "\377\377\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\377\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377\377\377\377" "\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\377\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377\377\377\377\377" "\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377" "\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377\377\377\377" "\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377" "\377\377\377\377\377\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377" "\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377" "\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\377\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\0\0" "\0\377\0\0\0\377\0\0\0\377\0\0\0\377\377\377\377\377\377\377\377\377\377" "\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\377\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377\377\377" "\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\377" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377\377\377" "\0\0\0\377\0\0\0\377\377\377\377\377\377\377\377\377\0\0\0\377\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377\377\377\0\0\0\377\0\0\0" "\0\0\0\0\0\0\0\0\377\377\377\377\377\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\377\377\377\377\377\377\377\377\377\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\377\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377" "\377\377\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377\377\377\0\0\0\377\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377" "\377\377\377\377\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\377\0\0\0\377\377\377\377\377\0\0\0\377\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" "\0\0\0\0\0\0\0\0\0\0\0\0\0";static void
draw_cursor(void){ void *result; unsigned char *ptr; int x, y; if (kms_bo_map(cursor.buffer, &result)) err(1, "kms_bo_map"); ptr = result; memset(ptr, 0, 64 * 64 * 4); for (y = 0; y < CURSOR_HEIGHT; y++) memcpy(ptr + 64 * 4 * y, cursor_data + 4 * CURSOR_WIDTH * y, CURSOR_WIDTH * 4); kms_bo_unmap(cursor.buffer); }static void
setup_cursor(void){ const unsigned int attr[] = { KMS_BO_TYPE, KMS_BO_TYPE_CURSOR_64X64_A8R8G8B8, KMS_WIDTH, 64, KMS_HEIGHT, 64, KMS_TERMINATE_PROP_LIST }; unsigned int handle; if (kms_bo_create(kms, attr, &cursor.buffer)) err(1, "kms_bo_create"); draw_cursor(); if (kms_bo_get_prop(cursor.buffer, KMS_HANDLE, &handle)) err(1, "kms_bo_get_prop"); if (drmModeSetCursor2(drm_fd, crtc_id, handle, 64, 64, CURSOR_HOT_X, CURSOR_HOT_Y)) err(1, "drmModeSetCursor2"); if (drmModeMoveCursor(drm_fd, crtc_id, cursor.x, cursor.y)) err(1, "drmModeMoveCursor"); }static void
create_framebuffer(void){ struct drm_mode_create_dumb creq = { .width = mode_info.hdisplay, .height = mode_info.vdisplay, .bpp = 32, .flags = 0, }; struct drm_mode_map_dumb mreq = { 0 }; if (drmIoctl(drm_fd, DRM_IOCTL_MODE_CREATE_DUMB, &creq)) err(1, "DRM_IOCTL_MODE_CREATE_DUMB"); if (drmModeAddFB(drm_fd, creq.width, creq.height, 24, 32, creq.pitch, creq.handle, &framebuffer.id)) err(1, "drmModeAddFB"); mreq.handle = creq.handle; if (drmIoctl(drm_fd, DRM_IOCTL_MODE_MAP_DUMB, &mreq)) err(1, "DRM_IOCTL_MODE_MAP_DUMB"); framebuffer.data = mmap(0, creq.size, PROT_READ | PROT_WRITE, MAP_SHARED, drm_fd, mreq.offset); if (framebuffer.data == MAP_FAILED) err(1, "mmap"); framebuffer.size = creq.size; memset(framebuffer.data, 0, framebuffer.size); /* Paint cursor location with a single colored pixel. */ framebuffer.data[1 + cursor.x * 4 + cursor.y * creq.pitch] = '\xff'; framebuffer.data[2 + cursor.x * 4 + cursor.y * creq.pitch] = '\xff'; }static int
setup_connector(drmModeConnector *conn, drmModeRes *res){ drmModeModeInfo *mode = NULL; int i; if (conn->connection != DRM_MODE_CONNECTED) return -1; for (int j = 0; j < conn->count_modes; j++) { if (!mode || (conn->modes[j].type & DRM_MODE_TYPE_PREFERRED)) { mode = &conn->modes[j]; if (conn->modes[j].type & DRM_MODE_TYPE_PREFERRED) break; } } if (!mode) return -1; for (i = 0; i < conn->count_encoders; i++) { int j; drmModeEncoder *enc = drmModeGetEncoder(drm_fd, conn->encoders[j]); if (!enc) continue; for (j = 0; j < res->count_crtcs; j++) { if (enc->possible_crtcs & (1u << j)) { crtc_id = res->crtcs[j]; break; } } drmModeFreeEncoder(enc); if (crtc_id >= 0) break; } memcpy(&mode_info, mode, sizeof(mode_info)); cursor.x = mode->hdisplay / 2; cursor.y = mode->vdisplay / 2; create_framebuffer(); if (drmModeSetCrtc(drm_fd, crtc_id, framebuffer.id, 0, 0, &conn->connector_id, 1, mode)) err(1, "drmModeSetCrtc"); return 0; }static void
setup_screen(drmModeRes *res){ int i; for (i = 0; i < res->count_connectors; i++) { int result; drmModeConnector *conn = drmModeGetConnector(drm_fd, res->connectors[i]); if (!conn) continue; result = setup_connector(conn, res); drmModeFreeConnector(conn); if (!result) break; } if (crtc_id < 0) errx(1, "no screen found"); }static void
setup_drm(const char *module){ drmModeRes *res; drm_fd = drmOpen(module, NULL); if (drm_fd < 0) err(1, "drmOpen"); if (kms_create(drm_fd, &kms) < 0) err(1, "kms_create"); res = drmModeGetResources(drm_fd); if (!res) err(1, "drmModeGetResources"); setup_screen(res); }static void
wait_for_input(void){ struct pollfd pfd = { .fd = 0, .events = POLLIN, }; poll(&pfd, 1, -1); }int
main(int argc, char *argv[]){ const char *module = "qxl"; if (argc > 1) module = argv[1]; setup_drm(module); setup_cursor(); wait_for_input(); return 0; }
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 113 lines · Daniel Vetter
Quoted 96 lines · John Keeping
Quoted 89 lines · Daniel Vetter
Quoted 82 lines · Alex Deucher
Quoted 75 lines · Daniel Vetter
Quoted 49 lines · John Keeping
Quoted 33 lines · Ville Syrjälä
Quoted 31 lines · John Keeping
The request's
hot_xandhot_yare set correctly for bothDRM_IOCTL_MODE_CURSORandDRM_IOCTL_MODE_CURSOR2so we just need to save the values and then apply the offset to the cursor plane when the cursor moves.Signed-off-by John Keeping <[email protected]>---
v2:
- add kerneldoc forhot_xandhot_yin structdrm_crtcdrivers/gpu/drm/drm_crtc.c | 11 +++++++---- include/drm/drm_crtc.h | 6 ++++++ 2 files changed, 13 insertions(+), 4 deletions(-)(quoted diff) +0
-0
b/drivers/gpu/drm/drm_crtc.cindex 720a153..40f5b84 100644 ---a/drivers/gpu/drm/drm_crtc.c
+++b/drivers/gpu/drm/drm_crtc.c(quoted diff) +0
-0@@ -2831,6 +2831,9 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc,
DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n"); returnPTR_ERR(fb); }(quoted diff) +3
-0+ + crtc->hot_x = req->hot_x; + crtc->hot_y = req->hot_y; } else { fb = NULL; }@@ -2841,11 +2844,11 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc, }Quoted 13 lines
Review static int · line 2851
Quoted 10 lines
(quoted diff) +4
-4if (req->flags & DRM_MODE_CURSOR_MOVE) { - crtc_x = req->x; - crtc_y = req->y; + crtc_x = req->x - crtc->hot_x; + crtc_y = req->y - crtc->hot_y; } else { - crtc_x = crtc->cursor_x; - crtc_y = crtc->cursor_y; + crtc_x = crtc->cursor_x - crtc->hot_x; + crtc_y = crtc->cursor_y - crtc->hot_y;Why does the location of the hotspot affect the plane position?
Quoted 5 lines
hot_{x,y} specify the location of the active pixel within the cursor plane and cursor_{x,y} specify the location of the active pixel on the display so we need to offset the plane position in order for the active pixel to be in the correct place.
Nope, hot_x/y is just for virtual machines to indicate where the logical cursor position is within the cursor plane. It should have 2 effect on how something is displayed. And no, I have absolutely no idea why radeon is pulling some tricks here, which have been added in
commit
78b1a6010b46a69bcd47b723a80f92693f26d17bAuthor: Michel Dänzer <[email protected]> Date: Tue Nov 18 18:00:08 2014 +0900drm/radeon: Use
cursor_set2hook for enabling / disabling
the HW cursorMichel/Alex, can you please shed some light onto this? radeon is the only driver doing this, making this interface inconsistent. Is the ddx doing something funny compared to -modeseting or weston?
Quoted 4 lines
At least a quick look in the -ati sources didn't even show a user for this, it's still using the old cursor ioctl. And there's no other indication in the commit of a bug or anything. Can we perhaps just revert this?
Quoted 5 lines
We use this is xf86-video-ati. See:
http://cgit.freedesktop.org/xorg/driver/xf86-video-ati/commit/?id=c9f8f642fd495937400618a4fc25ecae3f8888fc
Our hw cursor has a hotspot register that needs to be programmed for proper operation. I don't remember the details of the specific bug. Michel can provide more info.Quoted 4 lines
Yeah I was blind and didn't spot this. But I can't find your hotspot cursor reg - it's only used to adjust the x/y offsets (similar to John's patch). And amdgpu doesn't do this at all, it's only radoen.ko. Still confused.
Quoted 5 lines
Having investigated a bit more, I think xserver handles the hotspot itself without using the kernel hotspot handling and xorg-video-qxl carefully reverses this in order to take advantage of
drmModeSetCursor2(), so with X11 drivers you don't notice that the kernel handling of this is broken in nearly all drivers.Where did you spot this code in -qxl? Afaics it has the exact same copy of the usual
drmmode.ccode as everyone else. No adjustments of x/yhot seems to be going on there, nor in the qxl.ko kernel driver. Or at least I didn't find it.Quoted 4 lines
Here's a small test program that demonstrates whether or not cursor hotspots work. There should be a single colored pixel immediately to the left of the pointer but with a broken driver the white pixel will be 64 pixels to the left of the pointer.
Quoted 4 lines
Is there also a way to test this with X? In the end that's what will matter for most end users, and if there's difference in behaviour in the various X drivers we're really screwed (since essentially we can't ever fix it properly for the legacy ioctl).
I've now tested with X and QXL and it seems that the bug is in the QXL DRM driver, since the cursor appears in the wrong place when using both xorg-video-qxl and xorg-video-modesetting.
I think what's happening is that X and the DRM cursor ioctls always use cursor_{x,y} as the location of the top-left of the cursor image, but the SPICE protocol uses cursor_{x,y} as the location of the active pixel in the cursor image (the specification [1] uses the term "position of the mouse pointer"). So this patch is wrong and I withdraw it.
This means that the QXL driver needs to apply the hotspot offset to the location whenever it generated QXL_CURSOR_SET and QXL_CURSOR_MOVE commands.
[1] http://www.spice-space.org/docs/spice_protocol.pdf
_______________________________________________
dri-devel mailing list [email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 124 lines · John Keeping
Quoted 113 lines · Daniel Vetter
Quoted 96 lines · John Keeping
Quoted 89 lines · Daniel Vetter
Quoted 82 lines · Alex Deucher
Quoted 75 lines · Daniel Vetter
Quoted 49 lines · John Keeping
Quoted 33 lines · Ville Syrjälä
Quoted 31 lines · John Keeping
The request's
hot_xandhot_yare set correctly for bothDRM_IOCTL_MODE_CURSORandDRM_IOCTL_MODE_CURSOR2so we just need to save the values and then apply the offset to the cursor plane when the cursor moves.Signed-off-by John Keeping <[email protected]>---
v2:
- add kerneldoc forhot_xandhot_yin structdrm_crtcdrivers/gpu/drm/drm_crtc.c | 11 +++++++---- include/drm/drm_crtc.h | 6 ++++++ 2 files changed, 13 insertions(+), 4 deletions(-)(quoted diff) +0
-0
b/drivers/gpu/drm/drm_crtc.cindex 720a153..40f5b84 100644 ---a/drivers/gpu/drm/drm_crtc.c
+++b/drivers/gpu/drm/drm_crtc.c(quoted diff) +0
-0@@ -2831,6 +2831,9 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc,
DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n"); returnPTR_ERR(fb); }(quoted diff) +3
-0+ + crtc->hot_x = req->hot_x; + crtc->hot_y = req->hot_y; } else { fb = NULL; }@@ -2841,11 +2844,11 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc, }Quoted 13 lines
Review static int · line 2851
Quoted 10 lines
(quoted diff) +4
-4if (req->flags & DRM_MODE_CURSOR_MOVE) { - crtc_x = req->x; - crtc_y = req->y; + crtc_x = req->x - crtc->hot_x; + crtc_y = req->y - crtc->hot_y; } else { - crtc_x = crtc->cursor_x; - crtc_y = crtc->cursor_y; + crtc_x = crtc->cursor_x - crtc->hot_x; + crtc_y = crtc->cursor_y - crtc->hot_y;Why does the location of the hotspot affect the plane position?
Quoted 5 lines
hot_{x,y} specify the location of the active pixel within the cursor plane and cursor_{x,y} specify the location of the active pixel on the display so we need to offset the plane position in order for the active pixel to be in the correct place.
Nope, hot_x/y is just for virtual machines to indicate where the logical cursor position is within the cursor plane. It should have 2 effect on how something is displayed. And no, I have absolutely no idea why radeon is pulling some tricks here, which have been added in
commit
78b1a6010b46a69bcd47b723a80f92693f26d17bAuthor: Michel Dänzer <[email protected]> Date: Tue Nov 18 18:00:08 2014 +0900drm/radeon: Use
cursor_set2hook for enabling / disabling
the HW cursorMichel/Alex, can you please shed some light onto this? radeon is the only driver doing this, making this interface inconsistent. Is the ddx doing something funny compared to -modeseting or weston?
Quoted 4 lines
At least a quick look in the -ati sources didn't even show a user for this, it's still using the old cursor ioctl. And there's no other indication in the commit of a bug or anything. Can we perhaps just revert this?
Quoted 5 lines
We use this is xf86-video-ati. See:
http://cgit.freedesktop.org/xorg/driver/xf86-video-ati/commit/?id=c9f8f642fd495937400618a4fc25ecae3f8888fc
Our hw cursor has a hotspot register that needs to be programmed for proper operation. I don't remember the details of the specific bug. Michel can provide more info.Quoted 4 lines
Yeah I was blind and didn't spot this. But I can't find your hotspot cursor reg - it's only used to adjust the x/y offsets (similar to John's patch). And amdgpu doesn't do this at all, it's only radoen.ko. Still confused.
Quoted 5 lines
Having investigated a bit more, I think xserver handles the hotspot itself without using the kernel hotspot handling and xorg-video-qxl carefully reverses this in order to take advantage of
drmModeSetCursor2(), so with X11 drivers you don't notice that the kernel handling of this is broken in nearly all drivers.Where did you spot this code in -qxl? Afaics it has the exact same copy of the usual
drmmode.ccode as everyone else. No adjustments of x/yhot seems to be going on there, nor in the qxl.ko kernel driver. Or at least I didn't find it.Quoted 4 lines
Here's a small test program that demonstrates whether or not cursor hotspots work. There should be a single colored pixel immediately to the left of the pointer but with a broken driver the white pixel will be 64 pixels to the left of the pointer.
Quoted 4 lines
Is there also a way to test this with X? In the end that's what will matter for most end users, and if there's difference in behaviour in the various X drivers we're really screwed (since essentially we can't ever fix it properly for the legacy ioctl).
I've now tested with X and QXL and it seems that the bug is in the QXL DRM driver, since the cursor appears in the wrong place when using both xorg-video-qxl and xorg-video-modesetting.
Quoted 5 lines
I think what's happening is that X and the DRM cursor ioctls always use cursor_{x,y} as the location of the top-left of the cursor image, but the SPICE protocol uses cursor_{x,y} as the location of the active pixel in the cursor image (the specification [1] uses the term "position of the mouse pointer"). So this patch is wrong and I withdraw it.
Yup, x/y being the top-left corner of the cursor image is how all other drivers work.
Quoted 5 lines
This means that the QXL driver needs to apply the hotspot offset to the location whenever it generated
QXL_CURSOR_SETandQXL_CURSOR_MOVEcommands.
Excellent that we've figured this out. Care to write a patch for qxl since you've figured this all out?
Thanks, Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 48 lines · Daniel Vetter
Quoted 47 lines · John Keeping
Quoted 44 lines · Ville Syrjälä
Quoted 31 lines · John Keeping
The request's
hot_xandhot_yare set correctly for bothDRM_IOCTL_MODE_CURSORandDRM_IOCTL_MODE_CURSOR2so we just need to save the values and then apply the offset to the cursor plane when the cursor moves.Signed-off-by John Keeping <[email protected]>---
v2:
- add kerneldoc forhot_xandhot_yin structdrm_crtcdrivers/gpu/drm/drm_crtc.c | 11 +++++++---- include/drm/drm_crtc.h | 6 ++++++ 2 files changed, 13 insertions(+), 4 deletions(-)drivers/gpu/drm/drm_crtc.c +0
-0@@ -2831,6 +2831,9 @@ static int drm_mode_cursor_universal(struct
drm_crtc*crtc,DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n"); returnPTR_ERR(fb);drivers/gpu/drm/drm_crtc.c +3
-0} + + crtc->hot_x = req->hot_x; + crtc->hot_y = req->hot_y; }else { fb =NULL ; }@@ -2841,11 +2844,11 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc, }drivers/gpu/drm/drm_crtc.c static int drm_mode_cursor_universal(struct · line 2851
Quoted 10 lines
drivers/gpu/drm/drm_crtc.c +4
-4if (req->flags &DRM_MODE_CURSOR_MOVE ) { - crtc_x = req->x; - crtc_y = req->y; + crtc_x = req->x - crtc->hot_x; + crtc_y = req->y - crtc->hot_y; }else { - crtc_x = crtc->cursor_x; - crtc_y = crtc->cursor_y; + crtc_x = crtc->cursor_x - crtc->hot_x; + crtc_y = crtc->cursor_y - crtc->hot_y;Why does the location of the hotspot affect the plane position?
Quoted 8 lines
Quoted 4 lines
hot_{x,y} specify the location of the active pixel within the cursor plane and cursor_{x,y} specify the location of the active pixel on the display so we need to offset the plane position in order for the active pixel to be in the correct place.
Nope, hot_x/y is just for virtual machines to indicate where the logical cursor position is within the cursor plane. It should have 2 effect on how something is displayed.
Agreed: Since the DRM_IOCTL_MODE_CURSOR ioctl doesn't contain any information about the hotspot, the x/y coordinates passed in the DRM_IOCTL_MODE_CURSOR(2) ioctls can only refer to the position of the top left corner of the cursor.
Quoted 10 lines
And no, I have absolutely no idea why radeon is pulling some tricks here, which have been added in
commit
78b1a6010b46a69bcd47b723a80f92693f26d17bAuthor: Michel Dänzer <[email protected]> Date: Tue Nov 18 18:00:08 2014 +0900drm/radeon: Use
cursor_set2hook for enabling / disabling the HW cursorMichel/Alex, can you please shed some light onto this?
As described in the rest of the commit log, the intention was to avoid the cursor intermittently appearing in the wrong location with existing userspace which sets the cursor BO in one ioctl call and the new position in another ioctl call.
Quoted 1 line
radeon is the only driver doing this, making this interface inconsistent.
It's only inconsistent in the case that userspace updates the cursor position to account for the new hotspot position in one ioctl call first, and only then sets the new BO in another ioctl call. In all other cases, the cursor position passed in by userspace is preserved.
Anyway, in the meantime it has become apparent that this change didn't fully fix the problem, so feel free to revert it.
Signature · 6 lines
Earthling Michel Dänzer | http://www.amd.com Libre software enthusiast | Mesa and X developer _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 83 lines · Michel Dänzer
Quoted 48 lines · Daniel Vetter
Quoted 47 lines · John Keeping
Quoted 44 lines · Ville Syrjälä
Quoted 31 lines · John Keeping
The request's
hot_xandhot_yare set correctly for bothDRM_IOCTL_MODE_CURSORandDRM_IOCTL_MODE_CURSOR2so we just need to save the values and then apply the offset to the cursor plane when the cursor moves.Signed-off-by John Keeping <[email protected]>---
v2:
- add kerneldoc forhot_xandhot_yin structdrm_crtcdrivers/gpu/drm/drm_crtc.c | 11 +++++++---- include/drm/drm_crtc.h | 6 ++++++ 2 files changed, 13 insertions(+), 4 deletions(-)drivers/gpu/drm/drm_crtc.c +0
-0@@ -2831,6 +2831,9 @@ static int drm_mode_cursor_universal(struct
drm_crtc*crtc,DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n"); returnPTR_ERR(fb);drivers/gpu/drm/drm_crtc.c +3
-0} + + crtc->hot_x = req->hot_x; + crtc->hot_y = req->hot_y; }else { fb =NULL ; }@@ -2841,11 +2844,11 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc, }drivers/gpu/drm/drm_crtc.c static int drm_mode_cursor_universal(struct · line 2851
Quoted 10 lines
drivers/gpu/drm/drm_crtc.c +4
-4if (req->flags &DRM_MODE_CURSOR_MOVE ) { - crtc_x = req->x; - crtc_y = req->y; + crtc_x = req->x - crtc->hot_x; + crtc_y = req->y - crtc->hot_y; }else { - crtc_x = crtc->cursor_x; - crtc_y = crtc->cursor_y; + crtc_x = crtc->cursor_x - crtc->hot_x; + crtc_y = crtc->cursor_y - crtc->hot_y;Why does the location of the hotspot affect the plane position?
Quoted 8 lines
Quoted 4 lines
hot_{x,y} specify the location of the active pixel within the cursor plane and cursor_{x,y} specify the location of the active pixel on the display so we need to offset the plane position in order for the active pixel to be in the correct place.
Nope, hot_x/y is just for virtual machines to indicate where the logical cursor position is within the cursor plane. It should have 2 effect on how something is displayed.
Agreed: Since the
DRM_IOCTL_MODE_CURSORioctl doesn't contain any information about the hotspot, the x/y coordinates passed in theDRM_IOCTL_MODE_CURSOR(2)ioctls can only refer to the position of the top left corner of the cursor.Quoted 10 lines
And no, I have absolutely no idea why radeon is pulling some tricks here, which have been added in
commit
78b1a6010b46a69bcd47b723a80f92693f26d17bAuthor: Michel Dänzer <[email protected]> Date: Tue Nov 18 18:00:08 2014 +0900drm/radeon: Use
cursor_set2hook for enabling / disabling the HW cursorMichel/Alex, can you please shed some light onto this?
As described in the rest of the commit log, the intention was to avoid the cursor intermittently appearing in the wrong location with existing userspace which sets the cursor BO in one ioctl call and the new position in another ioctl call.
Quoted 1 line
radeon is the only driver doing this, making this interface inconsistent.
Quoted 7 lines
It's only inconsistent in the case that userspace updates the cursor position to account for the new hotspot position in one ioctl call first, and only then sets the new BO in another ioctl call. In all other cases, the cursor position passed in by userspace is preserved.
Anyway, in the meantime it has become apparent that this change didn't fully fix the problem, so feel free to revert it.
Yeah I read the commit message but didn't understand what it's doing. After some discussion with Alex on irc I realized that the fixup is only applied in when updating the cursor bo and changing the hotspot to avoid that kind of flickering. That problem is solved though on the kernel side with universal planes (where we don't artificially split up the cursor update into a move + bo-update for the driver interface any more). And it's fixable in userspace even with legacy cursor interfaces since the ioctl allows you to move + update at the same time too. It's just that X doesn't provide that interface to the driver in a useful way.
Anyway, conclusion is that radeon implements exactly the same behaviour as every other hw driver, with x/y pointing at the top-left corner of the cursor image (not the hotspot), in CRTC coordinates. I still have no idea what John is seeing though exactly, and why there's a difference between rockchip and qxl for him.
-Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 30 lines · Daniel Vetter
Quoted 21 lines · Michel Dänzer
Quoted 11 lines · Daniel Vetter
And no, I have absolutely no idea why radeon is pulling some tricks here, which have been added in
commit
78b1a6010b46a69bcd47b723a80f92693f26d17bAuthor: Michel Dänzer <[email protected]> Date: Tue Nov 18 18:00:08 2014 +0900drm/radeon: Use
cursor_set2hook for enabling / disabling the HW cursorMichel/Alex, can you please shed some light onto this?
As described in the rest of the commit log, the intention was to avoid the cursor intermittently appearing in the wrong location with existing userspace which sets the cursor BO in one ioctl call and the new position in another ioctl call.
Quoted 1 line
radeon is the only driver doing this, making this interface inconsistent.
Quoted 7 lines
It's only inconsistent in the case that userspace updates the cursor position to account for the new hotspot position in one ioctl call first, and only then sets the new BO in another ioctl call. In all other cases, the cursor position passed in by userspace is preserved.
Anyway, in the meantime it has become apparent that this change didn't fully fix the problem, so feel free to revert it.
Quoted 9 lines
Yeah I read the commit message but didn't understand what it's doing. After some discussion with Alex on irc I realized that the fixup is only applied in when updating the cursor bo and changing the hotspot to avoid that kind of flickering. That problem is solved though on the kernel side with universal planes (where we don't artificially split up the cursor update into a move + bo-update for the driver interface any more). And it's fixable in userspace even with legacy cursor interfaces since the ioctl allows you to move + update at the same time too. It's just that X doesn't provide that interface to the driver in a useful way.
Well, the legacy cursor interfaces currently don't allow the driver to prevent the hardware from updating the cursor between the cursor_set / cursor_move calls. Anyway, I tried adding a cursor_lock hook for that purpose and adapting userspace accordingly, but it still doesn't seem to fully fix the problem. So I'm leaving it to somebody else / another day. :)
Signature · 6 lines
Earthling Michel Dänzer | http://www.amd.com Libre software enthusiast | Mesa and X developer _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel