Skip to contentSkip to conversation

Add iProc PCIe PAXC and MSI support

PATCH Superseded Ray Jui 4 participants 20 messages Nov 18, 2015 – Nov 20, 2015

Subsystems (4)

v1 of 5 Superseded Latest is v5 →

lore
Share & tools
lore

Ray Jui

author maintainer
#0 lore raw

cover Add iProc PCIe PAXC and MSI support

This patch series adds support for the iProc PAXC interface and support for event queue based MSI, integrated in the iProc PCIe core

Traditionally, all iProc PCIe root complexes use the PAXB interface, with an integrated on-chip Serdes to support external endpoint devices. On newer iProc platforms, a PAXC interface is introduced, for connection with internally emulated PCIe endpoint devices in the ASIC

This iProc event queue based MSI support is meant for older platforms including NS, NSP, Cygnus, and etc. Newer platforms with integrated MSI in the GIC (e.g., giv2m or gicv3-its) should not use iProc event queue based MSI

This patch series is based on Linux v4.4-rc1 and is avaliable here:
https://github.com/Broadcom/cygnus-linux/tree/iproc-msi-v1

Ray Jui (5):
PCI: iproc: Update iProc PCIe device tree binding
PCI: iproc: Add PAXC interface support
PCI: iproc: Add iProc PCIe MSI device tree binding
PCI: iproc: Add iProc PCIe MSI support
ARM: dts: Enable MSI support for Broadcom Cygnus

 .../devicetree/bindings/pci/brcm,iproc-pcie.txt    |  45 ++-
 arch/arm/boot/dts/bcm-cygnus.dtsi                  |  26 ++
 drivers/pci/host/Kconfig                           |   9 +
 drivers/pci/host/Makefile                          |   1 +
 drivers/pci/host/pcie-iproc-msi.c                  | 434 +++++++++++++++++++++
 drivers/pci/host/pcie-iproc-platform.c             |   8 +
 drivers/pci/host/pcie-iproc.c                      | 221 +++++++++--
 drivers/pci/host/pcie-iproc.h                      |  31 ++
 8 files changed, 740 insertions(+), 35 deletions(-)
 create mode 100644 drivers/pci/host/pcie-iproc-msi.c
Signature · 1 line
1.9.1
author maintainer
#1 lore raw

PATCH 1/5 PCI: iproc: Update iProc PCIe device tree binding

Add a new compatible string "brcm,iproc-pcie-paxc", for PAXC based iProc PCIe root complex. A PAXC based PCIe root complex is connected to emulated endpoint devices internal to the ASIC

---
 Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt +4 -1
index 45c2a80..06eae0f 100644
@@ -1,7 +1,10 @@
 * Broadcom iProc PCIe controller with the platform bus interface
 
 Required properties:
-- compatible: Must be "brcm,iproc-pcie"
+- compatible: Must be "brcm,iproc-pcie" for PAXB, or "brcm,iproc-pcie-paxc"
+  for PAXC. PAXB based root complex is used for external endpoint devices.
+  PAXC based root complex is connected to emulated endpoint devices
+  internal to the ASIC
 - reg: base address and length of the PCIe controller I/O register space
 - #interrupt-cells: set to <1>
 - interrupt-map-mask and interrupt-map, standard PCI properties to define the
Signature · 1 line
1.9.1
author maintainer
#2 lore raw

PATCH 2/5 PCI: iproc: Add PAXC interface support

In reply to Ray Jui

Traditionally, all iProc PCIe root complexes use PAXB based wrapper, with an integrated on-chip Serdes to support external endpoint devices. On newer iProc platforms, a PAXC based wrapper is introduced, for connection with internally emulated PCIe endpoint devices in the ASIC

This patch adds support for PAXC based iProc PCIe root complex in the iProc PCIe core driver. This change fators out common logic between PAXB and PAXC, and use tables to store register offsets that are different between PAXB and PAXC. This allows the driver to be scaled to support subsequent PAXC revisions in the future

---
 drivers/pci/host/pcie-iproc-platform.c |   8 ++
 drivers/pci/host/pcie-iproc.c          | 202 +++++++++++++++++++++++++++------
 drivers/pci/host/pcie-iproc.h          |  19 ++++
 3 files changed, 195 insertions(+), 34 deletions(-)
drivers/pci/host/pcie-iproc-platform.c +8 -0
index c9550dc..716b56b 100644
@@ -42,6 +42,13 @@ static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
 	pcie->dev = &pdev->dev;
 	platform_set_drvdata(pdev, pcie);
 
+	if (of_device_is_compatible(np, "brcm,iproc-pcie"))
+		pcie->type = IPROC_PCIE_PAXB;
+	else if (of_device_is_compatible(np, "brcm,iproc-pcie-paxc"))
+		pcie->type = IPROC_PCIE_PAXC;
+	else
+		return -ENODEV;
+
 	ret = of_address_to_resource(np, 0, &reg);
 	if (ret < 0) {
 		dev_err(pcie->dev, "unable to obtain controller resources\n");
@@ -116,6 +123,7 @@ static int iproc_pcie_pltfm_remove(struct platform_device *pdev)
 
 static const struct of_device_id iproc_pcie_of_match_table[] = {
 	{ .compatible = "brcm,iproc-pcie", },
+	{ .compatible = "brcm,iproc-pcie-paxc", },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, iproc_pcie_of_match_table);
drivers/pci/host/pcie-iproc.c +168 -34

295 lines not on this page · raw message

drivers/pci/host/pcie-iproc.h +19 -0
index d3dc940..051b651 100644
@@ -15,6 +15,20 @@
 #define _PCIE_IPROC_H
 
 /**
+ * iProc PCIe interface type
+ *
+ * PAXB is the wrapper used in root complex that can be connected to an
+ * external endpoint device
+ *
+ * PAXC is the wrapper used in root complex dedicated for internal emulated
+ * endpoint devices
+ */
+enum iproc_pcie_type {
+	IPROC_PCIE_PAXB = 0,
+	IPROC_PCIE_PAXC,
+};
+
+/**
  * iProc PCIe outbound mapping
  * @set_oarr_size: indicates the OARR size bit needs to be set
  * @axi_offset: offset from the AXI address to the internal address used by
@@ -29,7 +43,10 @@ struct iproc_pcie_ob {
 
 /**
  * iProc PCIe device
+ *
  * @dev: pointer to device data structure
+ * @type: iProc PCIe interface type
+ * @reg_offsets: register offsets
  * @base: PCIe host controller I/O register base
  * @sysdata: Per PCI controller data (ARM-specific)
  * @root_bus: pointer to root bus
@@ -41,6 +58,8 @@ struct iproc_pcie_ob {
  */
 struct iproc_pcie {
 	struct device *dev;
+	enum iproc_pcie_type type;
+	const u16 *reg_offsets;
 	void __iomem *base;
 #ifdef CONFIG_ARM
 	struct pci_sys_data sysdata;
Signature · 1 line
1.9.1
#3 lore raw

Re: [PATCH 2/5] PCI: iproc: Add PAXC interface support

Quoted 24 lines · Ray Jui

Traditionally, all iProc PCIe root complexes use PAXB based wrapper, with an integrated on-chip Serdes to support external endpoint devices. On newer iProc platforms, a PAXC based wrapper is introduced, for connection with internally emulated PCIe endpoint devices in the ASIC

This patch adds support for PAXC based iProc PCIe root complex in the iProc PCIe core driver. This change fators out common logic between PAXB and PAXC, and use tables to store register offsets that are different between PAXB and PAXC. This allows the driver to be scaled to support subsequent PAXC revisions in the future

---
 drivers/pci/host/pcie-iproc-platform.c |   8 ++
 drivers/pci/host/pcie-iproc.c          | 202 +++++++++++++++++++++++++++------
 drivers/pci/host/pcie-iproc.h          |  19 ++++
 3 files changed, 195 insertions(+), 34 deletions(-)
drivers/pci/host/pcie-iproc-platform.c +0 -0
index c9550dc..716b56b 100644

drivers/pci/host/pcie-iproc-platform.c static int iproc_pcie_pltfm_probe(struct platform_device *pdev) · line 50

Quoted 9 lines
drivers/pci/host/pcie-iproc-platform.c +6 -0
@@ -42,6 +42,13 @@ static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
 	pcie->dev = &pdev->dev;
 	platform_set_drvdata(pdev, pcie);
 
+	if (of_device_is_compatible(np, "brcm,iproc-pcie"))
+		pcie->type = IPROC_PCIE_PAXB;
+	else if (of_device_is_compatible(np, "brcm,iproc-pcie-paxc"))
+		pcie->type = IPROC_PCIE_PAXC;
+	else
+		return -ENODEV;

Sorry for not noticing earlier, but typically, to avoid repeating the same compatible string twice (once if of_device_id, and somewhere else), you would put the type in the .data member of the of_device_id lookup table and you could fetch this directly here. So something like this:

static const struct of_device_id iproc_pcie_of_match_table[] = {
{ .compatible = "brcm,iproc-pcie", .data = (int *)IPROC_PCIE_PAXB },
+ { .compatible = "brcm,iproc-pcie-paxc", .data = (int *)IPROC_PCIE_PAXC },
{ /* sentinel */ }

Signature · 1 line
Florian
author maintainer
#4 lore raw

Re: [PATCH 2/5] PCI: iproc: Add PAXC interface support

Quoted 43 lines · Florian Fainelli
Quoted 24 lines · Ray Jui

Traditionally, all iProc PCIe root complexes use PAXB based wrapper, with an integrated on-chip Serdes to support external endpoint devices. On newer iProc platforms, a PAXC based wrapper is introduced, for connection with internally emulated PCIe endpoint devices in the ASIC

This patch adds support for PAXC based iProc PCIe root complex in the iProc PCIe core driver. This change fators out common logic between PAXB and PAXC, and use tables to store register offsets that are different between PAXB and PAXC. This allows the driver to be scaled to support subsequent PAXC revisions in the future

---
  drivers/pci/host/pcie-iproc-platform.c |   8 ++
  drivers/pci/host/pcie-iproc.c          | 202 +++++++++++++++++++++++++++------
  drivers/pci/host/pcie-iproc.h          |  19 ++++
  3 files changed, 195 insertions(+), 34 deletions(-)
drivers/pci/host/pcie-iproc-platform.c +0 -0
index c9550dc..716b56b 100644

drivers/pci/host/pcie-iproc-platform.c static int iproc_pcie_pltfm_probe(struct platform_device *pdev) · line 50

Quoted 9 lines
drivers/pci/host/pcie-iproc-platform.c +6 -0
@@ -42,6 +42,13 @@ static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
  	pcie->dev = &pdev->dev;
  	platform_set_drvdata(pdev, pcie);
 
+	if (of_device_is_compatible(np, "brcm,iproc-pcie"))
+		pcie->type = IPROC_PCIE_PAXB;
+	else if (of_device_is_compatible(np, "brcm,iproc-pcie-paxc"))
+		pcie->type = IPROC_PCIE_PAXC;
+	else
+		return -ENODEV;

Sorry for not noticing earlier, but typically, to avoid repeating the same compatible string twice (once if of_device_id, and somewhere else), you would put the type in the .data member of the of_device_id lookup table and you could fetch this directly here. So something like this:

static const struct of_device_id iproc_pcie_of_match_table[] = {
{ .compatible = "brcm,iproc-pcie", .data = (int *)IPROC_PCIE_PAXB },

Review

Quoted 2 lines
(quoted diff) +1 -0
+	{ .compatible = "brcm,iproc-pcie-paxc", .data = (int *)IPROC_PCIE_PAXC },
  	{ /* sentinel */ }

Just to confirm, if I do this, then the above code to check of_device_is_compatible becomes the following?

pcie->type = (enum iproc_pcie_type)of_id->data;

Thanks,

Ray

#5 lore raw

Re: [PATCH 2/5] PCI: iproc: Add PAXC interface support

Quoted 54 lines · Ray Jui
Quoted 43 lines · Florian Fainelli
Quoted 26 lines · Ray Jui

Traditionally, all iProc PCIe root complexes use PAXB based wrapper, with an integrated on-chip Serdes to support external endpoint devices. On newer iProc platforms, a PAXC based wrapper is introduced, for connection with internally emulated PCIe endpoint devices in the ASIC

This patch adds support for PAXC based iProc PCIe root complex in the iProc PCIe core driver. This change fators out common logic between PAXB and PAXC, and use tables to store register offsets that are different between PAXB and PAXC. This allows the driver to be scaled to support subsequent PAXC revisions in the future

---
  drivers/pci/host/pcie-iproc-platform.c |   8 ++
  drivers/pci/host/pcie-iproc.c          | 202
+++++++++++++++++++++++++++------
  drivers/pci/host/pcie-iproc.h          |  19 ++++
  3 files changed, 195 insertions(+), 34 deletions(-)
drivers/pci/host/pcie-iproc-platform.c +0 -0
index c9550dc..716b56b 100644

drivers/pci/host/pcie-iproc-platform.c static int iproc_pcie_pltfm_probe(struct · line 51

Quoted 10 lines
drivers/pci/host/pcie-iproc-platform.c +6 -0
@@ -42,6 +42,13 @@ static int iproc_pcie_pltfm_probe(struct
 platform_device *pdev)
      pcie->dev = &pdev->dev;
      platform_set_drvdata(pdev, pcie);
 
+    if (of_device_is_compatible(np, "brcm,iproc-pcie"))
+        pcie->type = IPROC_PCIE_PAXB;
+    else if (of_device_is_compatible(np, "brcm,iproc-pcie-paxc"))
+        pcie->type = IPROC_PCIE_PAXC;
+    else
+        return -ENODEV;

Sorry for not noticing earlier, but typically, to avoid repeating the same compatible string twice (once if of_device_id, and somewhere else), you would put the type in the .data member of the of_device_id lookup table and you could fetch this directly here. So something like this:

Quoted 7 lines

static const struct of_device_id iproc_pcie_of_match_table[] = {
{ .compatible = "brcm,iproc-pcie", .data = (int
*)IPROC_PCIE_PAXB },
+ { .compatible = "brcm,iproc-pcie-paxc", .data = (int
*)IPROC_PCIE_PAXC },

      { /* sentinel */ }
Quoted 4 lines

Just to confirm, if I do this, then the above code to check of_device_is_compatible becomes the following?

pcie->type = (enum iproc_pcie_type)of_id->data;

That is correct yes.

Signature · 1 line
Florian
author maintainer
#6 lore raw

Re: [PATCH 2/5] PCI: iproc: Add PAXC interface support

Quoted 55 lines · Florian Fainelli
Quoted 54 lines · Ray Jui
Quoted 50 lines · Florian Fainelli
Quoted 26 lines · Ray Jui

Traditionally, all iProc PCIe root complexes use PAXB based wrapper, with an integrated on-chip Serdes to support external endpoint devices. On newer iProc platforms, a PAXC based wrapper is introduced, for connection with internally emulated PCIe endpoint devices in the ASIC

This patch adds support for PAXC based iProc PCIe root complex in the iProc PCIe core driver. This change fators out common logic between PAXB and PAXC, and use tables to store register offsets that are different between PAXB and PAXC. This allows the driver to be scaled to support subsequent PAXC revisions in the future

---
   drivers/pci/host/pcie-iproc-platform.c |   8 ++
   drivers/pci/host/pcie-iproc.c          | 202
+++++++++++++++++++++++++++------
   drivers/pci/host/pcie-iproc.h          |  19 ++++
   3 files changed, 195 insertions(+), 34 deletions(-)
drivers/pci/host/pcie-iproc-platform.c +0 -0
index c9550dc..716b56b 100644

drivers/pci/host/pcie-iproc-platform.c static int iproc_pcie_pltfm_probe(struct · line 51

Quoted 10 lines
drivers/pci/host/pcie-iproc-platform.c +6 -0
@@ -42,6 +42,13 @@ static int iproc_pcie_pltfm_probe(struct
 platform_device *pdev)
       pcie->dev = &pdev->dev;
       platform_set_drvdata(pdev, pcie);
 
+    if (of_device_is_compatible(np, "brcm,iproc-pcie"))
+        pcie->type = IPROC_PCIE_PAXB;
+    else if (of_device_is_compatible(np, "brcm,iproc-pcie-paxc"))
+        pcie->type = IPROC_PCIE_PAXC;
+    else
+        return -ENODEV;

Sorry for not noticing earlier, but typically, to avoid repeating the same compatible string twice (once if of_device_id, and somewhere else), you would put the type in the .data member of the of_device_id lookup table and you could fetch this directly here. So something like this:

static const struct of_device_id iproc_pcie_of_match_table[] = {
{ .compatible = "brcm,iproc-pcie", .data = (int
*)IPROC_PCIE_PAXB },
+ { .compatible = "brcm,iproc-pcie-paxc", .data = (int
*)IPROC_PCIE_PAXC },

       { /* sentinel */ }
Quoted 7 lines
Quoted 4 lines

Just to confirm, if I do this, then the above code to check of_device_is_compatible becomes the following?

pcie->type = (enum iproc_pcie_type)of_id->data;

That is correct yes.

Okay thanks. Will wait for more comments and include this in the next iteration!

Ray

author maintainer
#7 lore raw

PATCH 3/5 PCI: iproc: Add iProc PCIe MSI device tree binding

In reply to Ray Jui

This patch updates the iProc PCIe device tree bindings with added binding information for MSI

---
 .../devicetree/bindings/pci/brcm,iproc-pcie.txt    | 40 ++++++++++++++++++++++
 1 file changed, 40 insertions(+)
Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt +40 -0
index 06eae0f..701d626 100644
@@ -35,6 +35,31 @@ Optional:
 - brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to
 increase the outbound window size
 
+MSI support (optional):
+
+For older platforms without MSI integrated in the GIC, iProc PCIe core provides
+an event queue based MSI support. The iProc MSI uses host memories to store
+MSI posted writes and event queues
+
+- msi-parent: Link to the device node of the MSI controller. On newer iProc
+platforms, the MSI controller may be gicv2m or gicv3-its. On older iProc
+platforms without MSI support in its interrupt controller, one may use the
+event queue based MSI support integrated within the iProc PCIe core
+
+When the iProc event queue based MSI is used, one needs to define the
+following properties in the MSI device node:
+- compatible: Must be "brcm,iproc-msi"
+- msi-controller: claims itself as an MSI controller
+- interrupt-parent: Link to its parent interrupt device
+- interrupts: List of interrupt IDs from its parent interrupt device
+- brcm,num-eq-region: Required number of 4K aligned memory region for MSI event
+queue
+- brcm,num-msi-msg-region: Required number of 4K aligned memory region for MSI
+posted writes
+Optional:
+- brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that
+require the interrupt enable registers to be set explicitly to enable MSI
+
 Example:
 	pcie0: pcie@18012000 {
 		compatible = "brcm,iproc-pcie";
@@ -61,6 +86,21 @@ Example:
 		brcm,pcie-ob-oarr-size;
 		brcm,pcie-ob-axi-offset = <0x00000000>;
 		brcm,pcie-ob-window-size = <256>;
+
+		msi-parent = <&msi0>;
+
+		/* iProc event queue based MSI */
+		msi0: msi@18012000 {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
+				     <GIC_SPI 97 IRQ_TYPE_NONE>,
+				     <GIC_SPI 98 IRQ_TYPE_NONE>,
+				     <GIC_SPI 99 IRQ_TYPE_NONE>,
+			brcm,num-eq-region = <1>;
+			brcm,num-msi-msg-region = <1>;
+		};
 	};
 
 	pcie1: pcie@18013000 {
Signature · 1 line
1.9.1
author maintainer
#8 lore raw

PATCH 4/5 PCI: iproc: Add iProc PCIe MSI support

In reply to Ray Jui

This patch adds PCIe MSI support for both PAXB and PAXC interfaces on all iProc based platforms. The patch follows the latest trend in the kernel to use MSI domain based implementation

This iProc event queue based MSI support should not be used with newer platforms with integrated MSI support in the GIC (e.g., giv2m or gicv3-its)

---
 drivers/pci/host/Kconfig          |   9 +
 drivers/pci/host/Makefile         |   1 +
 drivers/pci/host/pcie-iproc-msi.c | 434 ++++++++++++++++++++++++++++++++++++++
 drivers/pci/host/pcie-iproc.c     |  19 ++
 drivers/pci/host/pcie-iproc.h     |  12 ++
 5 files changed, 475 insertions(+)
 create mode 100644 drivers/pci/host/pcie-iproc-msi.c
drivers/pci/host/Kconfig +9 -0
index f131ba9..972e906 100644
@@ -126,6 +126,15 @@ config PCIE_IPROC
 	  iProc family of SoCs. An appropriate bus interface driver also needs
 	  to be enabled
 
+config PCIE_IPROC_MSI
+	bool "Broadcom iProc PCIe MSI support"
+	depends on ARCH_BCM_IPROC && PCI_MSI
+	select PCI_MSI_IRQ_DOMAIN
+	default ARCH_BCM_IPROC
+	help
+	  Say Y here if you want to enable MSI support for Broadcom's iProc
+	  PCIe controller
+
 config PCIE_IPROC_PLATFORM
 	tristate "Broadcom iProc PCIe platform bus driver"
 	depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST)
drivers/pci/host/Makefile +1 -0
index 9d4d3c6..0e4e95e 100644
@@ -15,6 +15,7 @@ obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
 obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
 obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
 obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
+obj-$(CONFIG_PCIE_IPROC_MSI) += pcie-iproc-msi.o
 obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
 obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
 obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
drivers/pci/host/pcie-iproc-msi.c new file +434 -0

434 lines not on this page · raw message

drivers/pci/host/pcie-iproc.c +19 -0
index 24d5b62..a575ef3 100644
@@ -440,6 +440,21 @@ static int iproc_pcie_map_ranges(struct iproc_pcie *pcie,
 	return 0;
 }
 
+static int iproc_pcie_msi_enable(struct iproc_pcie *pcie)
+{
+	struct device_node *msi_node;
+
+	msi_node = of_parse_phandle(pcie->dev->of_node, "msi-parent", 0);
+	if (!msi_node)
+		return -ENODEV;
+
+	/*
+	 * If another MSI controller is being used, the call below should fail
+	 * but that is okay
+	 */
+	return iproc_msi_init(pcie, msi_node);
+}
+
 int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 {
 	int ret;
@@ -507,6 +522,10 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 
 	iproc_pcie_enable(pcie);
 
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		if (iproc_pcie_msi_enable(pcie))
+			dev_info(pcie->dev, "not using iProc MSI\n");
+
 	pci_scan_child_bus(bus);
 	pci_assign_unassigned_bus_resources(bus);
 	pci_fixup_irqs(pci_common_swizzle, pcie->map_irq);
drivers/pci/host/pcie-iproc.h +12 -0
index 051b651..17317ef 100644
@@ -14,6 +14,8 @@
 #ifndef _PCIE_IPROC_H
 #define _PCIE_IPROC_H
 
+#define IPROC_PCIE_MAX_NUM_IRQS 6
+
 /**
  * iProc PCIe interface type
  *
@@ -74,4 +76,14 @@ struct iproc_pcie {
 int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res);
 int iproc_pcie_remove(struct iproc_pcie *pcie);
 
+#ifdef CONFIG_PCI_MSI
+int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node);
+#else
+static inline int iproc_msi_init(struct iproc_pcie *pcie,
+				 struct device_node *node)
+{
+	return -ENODEV;
+}
+#endif
+
 #endif /* _PCIE_IPROC_H */
Signature · 1 line
1.9.1
#9 lore raw

Re: [PATCH 4/5] PCI: iproc: Add iProc PCIe MSI support

On Tue, 17 Nov 2015 16:31:54 -0800
Ray Jui <[email protected]> wrote:

Hi Ray,

A few comments below.

Quoted 165 lines

This patch adds PCIe MSI support for both PAXB and PAXC interfaces on all iProc based platforms. The patch follows the latest trend in the kernel to use MSI domain based implementation

This iProc event queue based MSI support should not be used with newer platforms with integrated MSI support in the GIC (e.g., giv2m or gicv3-its)

---
 drivers/pci/host/Kconfig          |   9 +
 drivers/pci/host/Makefile         |   1 +
 drivers/pci/host/pcie-iproc-msi.c | 434 ++++++++++++++++++++++++++++++++++++++
 drivers/pci/host/pcie-iproc.c     |  19 ++
 drivers/pci/host/pcie-iproc.h     |  12 ++
 5 files changed, 475 insertions(+)
 create mode 100644 drivers/pci/host/pcie-iproc-msi.c
drivers/pci/host/Kconfig +9 -0
index f131ba9..972e906 100644
@@ -126,6 +126,15 @@ config PCIE_IPROC
 	  iProc family of SoCs. An appropriate bus interface driver also needs
 	  to be enabled
 
+config PCIE_IPROC_MSI
+	bool "Broadcom iProc PCIe MSI support"
+	depends on ARCH_BCM_IPROC && PCI_MSI
+	select PCI_MSI_IRQ_DOMAIN
+	default ARCH_BCM_IPROC
+	help
+	  Say Y here if you want to enable MSI support for Broadcom's iProc
+	  PCIe controller
+
 config PCIE_IPROC_PLATFORM
 	tristate "Broadcom iProc PCIe platform bus driver"
 	depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST)
drivers/pci/host/Makefile +1 -0
index 9d4d3c6..0e4e95e 100644
@@ -15,6 +15,7 @@ obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
 obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
 obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
 obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
+obj-$(CONFIG_PCIE_IPROC_MSI) += pcie-iproc-msi.o
 obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
 obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
 obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
drivers/pci/host/pcie-iproc-msi.c new file +106 -0
new file mode 100644
index 0000000..a55c707
@@ -0,0 +1,434 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/msi.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+
+#include "pcie-iproc.h"
+
+#define IPROC_MSI_INTS_EN_OFFSET       0x208
+#define IPROC_MSI_INTR_EN_SHIFT        11
+#define IPROC_MSI_INTR_EN              BIT(IPROC_MSI_INTR_EN_SHIFT)
+#define IPROC_MSI_INT_N_EVENT_SHIFT    1
+#define IPROC_MSI_INT_N_EVENT          BIT(IPROC_MSI_INT_N_EVENT_SHIFT)
+#define IPROC_MSI_EQ_EN_SHIFT          0
+#define IPROC_MSI_EQ_EN                BIT(IPROC_MSI_EQ_EN_SHIFT)
+
+#define IPROC_MSI_EQ_MASK              0x3f
+
+/* number of queues in each event queue */
+#define IPROC_MSI_EQ_LEN               64
+
+/* size of each event queue memory region */
+#define EQ_MEM_REGION_SIZE           SZ_4K
+
+/* size of each MSI message memory region */
+#define MSI_MSG_MEM_REGION_SIZE      SZ_4K
+
+enum iproc_msi_reg {
+	IPROC_MSI_EQ_PAGE = 0,
+	IPROC_MSI_EQ_PAGE_UPPER,
+	IPROC_MSI_PAGE,
+	IPROC_MSI_PAGE_UPPER,
+	IPROC_MSI_CTRL,
+	IPROC_MSI_EQ_HEAD,
+	IPROC_MSI_EQ_TAIL,
+	IPROC_MSI_REG_SIZE,
+};
+
+/**
+ * iProc event queue based MSI
+ *
+ * Only meant to be used on platforms without MSI support integrated into the
+ * GIC
+ *
+ * @pcie: pointer to iProc PCIe data
+ * @reg_offsets: MSI register offsets
+ * @irqs: pointer to an array that contains the interrupt IDs
+ * @nirqs: number of total interrupts
+ * @has_inten_reg: indicates the MSI interrupt enable register needs to be
+ * set explicitly (required for some legacy platforms)
+ * @used: bitmap to track usage of MSI
+ * @inner_domain: inner IRQ domain
+ * @msi_domain: MSI IRQ domain
+ * @bitmap_lock: lock to protect access to the IRQ bitmap
+ * @n_eq_region: required number of 4K aligned memory region for MSI event
+ * queues
+ * @n_msi_msg_region: required number of 4K aligned memory region for MSI
+ * posted writes
+ * @eq_base: pointer to allocated memory region for MSI event queues
+ * @msi_base: pointer to allocated memory region for MSI posted writes
+ */
+struct iproc_msi {
+	struct iproc_pcie *pcie;
+	const u16 (*reg_offsets)[IPROC_MSI_REG_SIZE];
+	int *irqs;
+	int nirqs;
+	bool has_inten_reg;
+	DECLARE_BITMAP(used, IPROC_PCIE_MAX_NUM_IRQS);
+	struct irq_domain *inner_domain;
+	struct irq_domain *msi_domain;
+	struct mutex bitmap_lock;
+	unsigned int n_eq_region;
+	unsigned int n_msi_msg_region;
+	void *eq_base;
+	void *msi_base;
+};
+
+static const u16
+iproc_msi_reg_paxb[IPROC_PCIE_MAX_NUM_IRQS][IPROC_MSI_REG_SIZE] = {
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x210, 0x250, 0x254 },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x214, 0x258, 0x25c },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x218, 0x260, 0x264 },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x21c, 0x268, 0x26c },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x220, 0x270, 0x274 },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x224, 0x278, 0x27c },
+};
+
+static const u16
+iproc_msi_reg_paxc[IPROC_PCIE_MAX_NUM_IRQS][IPROC_MSI_REG_SIZE] = {
+	{ 0xc00, 0xc04, 0xc08, 0xc0c, 0xc40, 0xc50, 0xc60 },
+	{ 0xc10, 0xc14, 0xc18, 0xc1c, 0xc44, 0xc54, 0xc64 },
+	{ 0xc20, 0xc24, 0xc28, 0xc2c, 0xc48, 0xc58, 0xc68 },

drivers/pci/host/pcie-iproc-msi.c line 116

Quoted 10 lines
drivers/pci/host/pcie-iproc-msi.c new file +10 -0
+	{ 0xc30, 0xc34, 0xc38, 0xc3c, 0xc4c, 0xc5c, 0xc6c },
+};
+
+static inline u32 iproc_msi_read_reg(struct iproc_msi *msi,
+				     enum iproc_msi_reg reg,
+				     unsigned int eq)
+{
+	struct iproc_pcie *pcie = msi->pcie;
+
+	return readl(pcie->base + msi->reg_offsets[eq][reg]);

Do you need the extra barrier implied by readl? readl_relaxed should be enough.

drivers/pci/host/pcie-iproc-msi.c line 125

Quoted 9 lines
drivers/pci/host/pcie-iproc-msi.c new file +9 -0
+}
+
+static inline void iproc_msi_write_reg(struct iproc_msi *msi,
+				       enum iproc_msi_reg reg,
+				       int eq, u32 val)
+{
+	struct iproc_pcie *pcie = msi->pcie;
+
+	writel(val, pcie->base + msi->reg_offsets[eq][reg]);

Same here for writel vs writel_relaxed.

drivers/pci/host/pcie-iproc-msi.c line 133

Quoted 8 lines
drivers/pci/host/pcie-iproc-msi.c new file +8 -0
+}
+
+static struct irq_chip iproc_msi_top_irq_chip = {
+	.name = "iProc MSI",
+	.irq_enable = pci_msi_unmask_irq,
+	.irq_disable = pci_msi_mask_irq,
+	.irq_mask = pci_msi_mask_irq,
+	.irq_unmask = pci_msi_unmask_irq,

There is no need to provide both enable/disable and mask/unmask. And since pci_msi_{un}mask_irq is the default, you can get rid of these function pointers anyway.

drivers/pci/host/pcie-iproc-msi.c line 145

Quoted 12 lines
drivers/pci/host/pcie-iproc-msi.c new file +12 -0
+};
+
+static struct msi_domain_info iproc_msi_domain_info = {
+	.flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+		MSI_FLAG_PCI_MSIX,
+	.chip = &iproc_msi_top_irq_chip,
+};
+
+static int iproc_msi_irq_set_affinity(struct irq_data *data,
+				      const struct cpumask *mask, bool force)
+{
+	return -EINVAL;

I wish people would stop building stupid HW that prevents proper affinity setting for MSI...

Quoted 21 lines
drivers/pci/host/pcie-iproc-msi.c new file +21 -0
+}
+
+static void iproc_msi_irq_compose_msi_msg(struct irq_data *data,
+					  struct msi_msg *msg)
+{
+	struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
+	phys_addr_t addr;
+
+	addr = virt_to_phys(msi->msi_base) | (data->hwirq * 4);
+	msg->address_lo = lower_32_bits(addr);
+	msg->address_hi = upper_32_bits(addr);
+	msg->data = data->hwirq;
+}
+
+static struct irq_chip iproc_msi_bottom_irq_chip = {
+	.name = "MSI",
+	.irq_set_affinity = iproc_msi_irq_set_affinity,
+	.irq_compose_msi_msg = iproc_msi_irq_compose_msi_msg,
+};
+
+static int iproc_msi_irq_domain_alloc(struct irq_domain *domain,

drivers/pci/host/pcie-iproc-msi.c line 176

Quoted 10 lines
drivers/pci/host/pcie-iproc-msi.c new file +10 -0
+				      unsigned int virq, unsigned int nr_irqs,
+				      void *args)
+{
+	struct iproc_msi *msi = domain->host_data;
+	int i, msi_irq;
+
+	mutex_lock(&msi->bitmap_lock);
+
+	for (i = 0; i < nr_irqs; i++) {
+		msi_irq = find_first_zero_bit(msi->used, msi->nirqs);

This is slightly puzzling. Do you really have at most 6 MSIs? Usually, we end up with a larger number of MSIs (32 or 64) multiplexed on top of a small number of wired interrupts. Here, you seem to have a 1-1 mapping. Is that really the case?

If so (and assuming the wired interrupts are always contiguous), you shouldn't represent this as a chained interrupt (a multiplexer), but as a stacked irqchip, similar to what GICv2m does.

Quoted 57 lines
drivers/pci/host/pcie-iproc-msi.c new file +57 -0
+		if (msi_irq < msi->nirqs) {
+			set_bit(msi_irq, msi->used);
+		} else {
+			mutex_unlock(&msi->bitmap_lock);
+			return -ENOSPC;
+		}
+
+		irq_domain_set_info(domain, virq + i, msi_irq,
+				    &iproc_msi_bottom_irq_chip,
+				    domain->host_data, handle_simple_irq,
+				    NULL, NULL);
+	}
+
+	mutex_unlock(&msi->bitmap_lock);
+	return 0;
+}
+
+static void iproc_msi_irq_domain_free(struct irq_domain *domain,
+				      unsigned int virq, unsigned int nr_irqs)
+{
+	struct irq_data *data = irq_domain_get_irq_data(domain, virq);
+	struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
+	unsigned int i;
+
+	mutex_lock(&msi->bitmap_lock);
+
+	for (i = 0; i < nr_irqs; i++) {
+		struct irq_data *data = irq_domain_get_irq_data(domain,
+								virq + i);
+		if (!test_bit(data->hwirq, msi->used)) {
+			dev_warn(msi->pcie->dev, "freeing unused MSI %lu\n",
+				 data->hwirq);
+		} else
+			clear_bit(data->hwirq, msi->used);
+	}
+
+	mutex_unlock(&msi->bitmap_lock);
+	irq_domain_free_irqs_parent(domain, virq, nr_irqs);
+}
+
+static const struct irq_domain_ops msi_domain_ops = {
+	.alloc = iproc_msi_irq_domain_alloc,
+	.free = iproc_msi_irq_domain_free,
+};
+
+static void iproc_msi_enable(struct iproc_msi *msi)
+{
+	struct iproc_pcie *pcie = msi->pcie;
+	int i, eq;
+	u32 val;
+
+	/* program memory region for each event queue */
+	for (i = 0; i < msi->n_eq_region; i++) {
+		phys_addr_t addr =
+			virt_to_phys(msi->eq_base + (i * EQ_MEM_REGION_SIZE));
+
+		iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE, i,

drivers/pci/host/pcie-iproc-msi.c line 243

Quoted 10 lines
drivers/pci/host/pcie-iproc-msi.c new file +10 -0
+				    lower_32_bits(addr));
+		iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE_UPPER, i,
+				    upper_32_bits(addr));
+	}
+
+	/* program memory region for MSI posted writes */
+	for (i = 0; i < msi->n_msi_msg_region; i++) {
+		phys_addr_t addr =
+			virt_to_phys(msi->msi_base +
+				     (i * MSI_MSG_MEM_REGION_SIZE));

You seem to be a victim of checkpatch. Please don't split statements like this, it just make it harder to read. My terminal can wrap lines very conveniently, and I don't care about the 80 character limit...

Quoted 48 lines
drivers/pci/host/pcie-iproc-msi.c new file +48 -0
+
+		iproc_msi_write_reg(msi, IPROC_MSI_PAGE, i,
+				    lower_32_bits(addr));
+		iproc_msi_write_reg(msi, IPROC_MSI_PAGE_UPPER, i,
+				    upper_32_bits(addr));
+	}
+
+	for (eq = 0; eq < msi->nirqs; eq++) {
+		/* enable MSI event queue */
+		val = IPROC_MSI_INTR_EN | IPROC_MSI_INT_N_EVENT |
+			IPROC_MSI_EQ_EN;
+		iproc_msi_write_reg(msi, IPROC_MSI_CTRL, eq, val);
+
+		/*
+		 * Some legacy platforms require the MSI interrupt enable
+		 * register to be set explicitly
+		 */
+		if (msi->has_inten_reg) {
+			val = readl(pcie->base + IPROC_MSI_INTS_EN_OFFSET);
+			val |= BIT(eq);
+			writel(val, pcie->base + IPROC_MSI_INTS_EN_OFFSET);
+		}
+	}
+}
+
+static void iproc_msi_handler(struct irq_desc *desc)
+{
+	unsigned int irq = irq_desc_get_irq(desc);
+	struct irq_chip *irq_chip = irq_desc_get_chip(desc);
+	struct iproc_msi *msi;
+	struct iproc_pcie *pcie;
+	u32 eq, head, tail, num_events;
+	int virq;
+
+	chained_irq_enter(irq_chip, desc);
+
+	msi = irq_get_handler_data(irq);
+	pcie = msi->pcie;
+
+	eq = irq - msi->irqs[0];
+	virq = irq_find_mapping(msi->inner_domain, eq);
+	head = iproc_msi_read_reg(msi, IPROC_MSI_EQ_HEAD, eq) &
+		IPROC_MSI_EQ_MASK;
+	do {
+		tail = iproc_msi_read_reg(msi, IPROC_MSI_EQ_TAIL, eq) &
+			IPROC_MSI_EQ_MASK;
+
+		num_events = (tail < head) ?

drivers/pci/host/pcie-iproc-msi.c line 301

Quoted 10 lines
drivers/pci/host/pcie-iproc-msi.c new file +10 -0
+			(IPROC_MSI_EQ_LEN - (head - tail)) : (tail - head);
+		if (!num_events)
+			break;
+
+		generic_handle_irq(virq);
+
+		head++;
+		head %= IPROC_MSI_EQ_LEN;
+		iproc_msi_write_reg(msi, IPROC_MSI_EQ_HEAD, eq, head);
+	} while (true);

That's unusual. You seem to get only one interrupt for a bunch of MSIs, all representing the same IRQ? That feels very weird, as you can usually collapse edge interrupts.

Quoted 123 lines
drivers/pci/host/pcie-iproc-msi.c new file +123 -0
+
+	chained_irq_exit(irq_chip, desc);
+}
+
+int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node)
+{
+	struct iproc_msi *msi;
+	struct device_node *parent_node;
+	struct irq_domain *parent_domain;
+	int i, ret;
+
+	if (!of_device_is_compatible(node, "brcm,iproc-msi"))
+		return -ENODEV;
+
+	if (!of_find_property(node, "msi-controller", NULL))
+		return -ENODEV;
+
+	parent_node = of_parse_phandle(node, "interrupt-parent", 0);
+	if (!parent_node) {
+		dev_err(pcie->dev, "unable to parse MSI interrupt parent\n");
+		return -ENODEV;
+	}
+
+	parent_domain = irq_find_host(parent_node);
+	if (!parent_domain) {
+		dev_err(pcie->dev, "unable to get MSI parent domain\n");
+		return -ENODEV;
+	}
+
+	msi = devm_kzalloc(pcie->dev, sizeof(*msi), GFP_KERNEL);
+	if (!msi)
+		return -ENOMEM;
+
+	msi->pcie = pcie;
+	mutex_init(&msi->bitmap_lock);
+
+	switch (pcie->type) {
+	case IPROC_PCIE_PAXB:
+		msi->reg_offsets = iproc_msi_reg_paxb;
+		break;
+	case IPROC_PCIE_PAXC:
+		msi->reg_offsets = iproc_msi_reg_paxc;
+		break;
+	default:
+		dev_err(pcie->dev, "incompatible iProc PCIe interface\n");
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32(node, "brcm,num-eq-region",
+				   &msi->n_eq_region);
+	if (ret || msi->n_eq_region == 0) {
+		dev_err(pcie->dev,
+			"invalid property 'brcm,num-eq-region' %u\n",
+			msi->n_eq_region);
+		return -ENODEV;
+	}
+
+	ret = of_property_read_u32(node, "brcm,num-msi-msg-region",
+				   &msi->n_msi_msg_region);
+	if (ret || msi->n_msi_msg_region == 0) {
+		dev_err(pcie->dev,
+			"invalid property 'brcm,num-msi-msg-region' %u\n",
+			msi->n_msi_msg_region);
+		return -ENODEV;
+	}
+
+	/* reserve memory for MSI event queue */
+	msi->eq_base = devm_kcalloc(pcie->dev, msi->n_eq_region + 1,
+				    EQ_MEM_REGION_SIZE, GFP_KERNEL);
+	if (!msi->eq_base)
+		return -ENOMEM;
+	msi->eq_base = PTR_ALIGN(msi->eq_base, EQ_MEM_REGION_SIZE);
+
+	/* reserve memory for MSI posted writes */
+	msi->msi_base = devm_kcalloc(pcie->dev, msi->n_msi_msg_region + 1,
+				     MSI_MSG_MEM_REGION_SIZE, GFP_KERNEL);
+	if (!msi->msi_base)
+		return -ENOMEM;
+	msi->msi_base = PTR_ALIGN(msi->msi_base, MSI_MSG_MEM_REGION_SIZE);
+
+	if (of_find_property(node, "brcm,pcie-msi-inten", NULL))
+		msi->has_inten_reg = true;
+
+	msi->nirqs = of_irq_count(node);
+	if (!msi->nirqs) {
+		dev_err(pcie->dev, "found no MSI interrupt in DT\n");
+		return -ENODEV;
+	}
+	if (msi->nirqs > IPROC_PCIE_MAX_NUM_IRQS) {
+		dev_warn(pcie->dev, "too many MSI interrupts defined %d\n",
+			 msi->nirqs);
+		msi->nirqs = IPROC_PCIE_MAX_NUM_IRQS;
+	}
+	msi->irqs = devm_kcalloc(pcie->dev, msi->nirqs, sizeof(*msi->irqs),
+				 GFP_KERNEL);
+	if (!msi->irqs)
+		return -ENOMEM;
+
+	for (i = 0; i < msi->nirqs; i++) {
+		msi->irqs[i] = irq_of_parse_and_map(node, i);
+		if (!msi->irqs[i]) {
+			dev_err(pcie->dev, "unable to parse/map interrupt\n");
+			return -ENODEV;
+		}
+	}
+
+	msi->inner_domain = irq_domain_add_hierarchy(parent_domain, 0,
+						     msi->nirqs, NULL,
+						     &msi_domain_ops,
+						     msi);
+	if (!msi->inner_domain) {
+		dev_err(pcie->dev, "failed to create inner domain\n");
+		return -ENOMEM;
+	}
+
+	msi->msi_domain = pci_msi_create_irq_domain(of_node_to_fwnode(node),
+						    &iproc_msi_domain_info,
+						    msi->inner_domain);
+	if (!msi->msi_domain) {
+		dev_err(pcie->dev, "failed to create MSI domain\n");
+		irq_domain_remove(msi->inner_domain);
+		return -ENOMEM;
+	}

drivers/pci/host/pcie-iproc-msi.c line 434

Quoted 10 lines
drivers/pci/host/pcie-iproc-msi.c new file +10 -0
+
+	for (i = 0; i < msi->nirqs; i++)
+		irq_set_chained_handler_and_data(msi->irqs[i],
+						 iproc_msi_handler, msi);
+
+	iproc_msi_enable(msi);
+
+	return 0;
+}
+EXPORT_SYMBOL(iproc_msi_init);

Do you really intend for this to be built as a standalone module?

Quoted 42 lines
drivers/pci/host/pcie-iproc.c +19 -0
index 24d5b62..a575ef3 100644
@@ -440,6 +440,21 @@ static int iproc_pcie_map_ranges(struct iproc_pcie *pcie,
 	return 0;
 }
 
+static int iproc_pcie_msi_enable(struct iproc_pcie *pcie)
+{
+	struct device_node *msi_node;
+
+	msi_node = of_parse_phandle(pcie->dev->of_node, "msi-parent", 0);
+	if (!msi_node)
+		return -ENODEV;
+
+	/*
+	 * If another MSI controller is being used, the call below should fail
+	 * but that is okay
+	 */
+	return iproc_msi_init(pcie, msi_node);
+}
+
 int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 {
 	int ret;
@@ -507,6 +522,10 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 
 	iproc_pcie_enable(pcie);
 
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		if (iproc_pcie_msi_enable(pcie))
+			dev_info(pcie->dev, "not using iProc MSI\n");
+
 	pci_scan_child_bus(bus);
 	pci_assign_unassigned_bus_resources(bus);
 	pci_fixup_irqs(pci_common_swizzle, pcie->map_irq);
drivers/pci/host/pcie-iproc.h +0 -0
index 051b651..17317ef 100644

drivers/pci/host/pcie-iproc.h line 18

Quoted 5 lines
drivers/pci/host/pcie-iproc.h +2 -0
@@ -14,6 +14,8 @@
 #ifndef _PCIE_IPROC_H
 #define _PCIE_IPROC_H
 
+#define IPROC_PCIE_MAX_NUM_IRQS 6
+

I don't see the point in putting this in an include file, as it is only used in a single location.

Quoted 8 lines
drivers/pci/host/pcie-iproc.h +1 -0
 /**
  * iProc PCIe interface type
  *
@@ -74,4 +76,14 @@ struct iproc_pcie {
 int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res);
 int iproc_pcie_remove(struct iproc_pcie *pcie);
 
+#ifdef CONFIG_PCI_MSI

drivers/pci/host/pcie-iproc.h struct iproc_pcie { · line 89

Quoted 10 lines
drivers/pci/host/pcie-iproc.h +9 -0
+int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node);
+#else
+static inline int iproc_msi_init(struct iproc_pcie *pcie,
+				 struct device_node *node)
+{
+	return -ENODEV;
+}
+#endif
+
 #endif /* _PCIE_IPROC_H */

Thanks,

	M.
Signature · 1 line
Jazz is not dead. It just smells funny.
#10 lore raw

Re: [PATCH 4/5] PCI: iproc: Add iProc PCIe MSI support

Quoted 10 lines · On Wednesday 18 November 2015 08:48:45 Marc Zyngier wrote:

drivers/pci/host/pcie-iproc-msi.c line 116

Quoted 7 lines
drivers/pci/host/pcie-iproc-msi.c new file +7 -0
+static inline u32 iproc_msi_read_reg(struct iproc_msi *msi,
+				     enum iproc_msi_reg reg,
+				     unsigned int eq)
+{
+	struct iproc_pcie *pcie = msi->pcie;
+
+	return readl(pcie->base + msi->reg_offsets[eq][reg]);

Do you need the extra barrier implied by readl? readl_relaxed should be enough.

I suspect this is the one place where it's needed for a lot of
drivers: when the PCI device sends DMA data followed by the MSI message, the device driver can safely assume that the DMA data has arrived in memory even without doing another readl() from the device itself.

It really depends on how the MSI implementation here interacts with the memory controller, and we should probably have a comment to explain this either way.

Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 125

Quoted 7 lines
drivers/pci/host/pcie-iproc-msi.c new file +7 -0
+static inline void iproc_msi_write_reg(struct iproc_msi *msi,
+				       enum iproc_msi_reg reg,
+				       int eq, u32 val)
+{
+	struct iproc_pcie *pcie = msi->pcie;
+
+	writel(val, pcie->base + msi->reg_offsets[eq][reg]);

Same here for writel vs writel_relaxed.

We probably want writel_relaxed() when calling this from iproc_msi_handler(), but not when calling from iproc_msi_enable(), which should default to a normal writel(), so we can be sure it's actually configured right at the time we return from iproc_msi_init(). You could try to prove that using writel_relaxed is correct here, but using writel makes it so much easier.

Arnd

author maintainer
#11 lore raw

Re: [PATCH 4/5] PCI: iproc: Add iProc PCIe MSI support

Hi Arnd,

Quoted 40 lines · Arnd Bergmann
Quoted 10 lines · On Wednesday 18 November 2015 08:48:45 Marc Zyngier wrote:

drivers/pci/host/pcie-iproc-msi.c line 116

Quoted 7 lines
drivers/pci/host/pcie-iproc-msi.c new file +7 -0
+static inline u32 iproc_msi_read_reg(struct iproc_msi *msi,
+				     enum iproc_msi_reg reg,
+				     unsigned int eq)
+{
+	struct iproc_pcie *pcie = msi->pcie;
+
+	return readl(pcie->base + msi->reg_offsets[eq][reg]);

Do you need the extra barrier implied by readl? readl_relaxed should be enough.

I suspect this is the one place where it's needed for a lot of
drivers: when the PCI device sends DMA data followed by the MSI message, the device driver can safely assume that the DMA data has arrived in memory even without doing another readl() from the device itself.

It really depends on how the MSI implementation here interacts with the memory controller, and we should probably have a comment to explain this either way.

Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 125

Quoted 7 lines
drivers/pci/host/pcie-iproc-msi.c new file +7 -0
+static inline void iproc_msi_write_reg(struct iproc_msi *msi,
+				       enum iproc_msi_reg reg,
+				       int eq, u32 val)
+{
+	struct iproc_pcie *pcie = msi->pcie;
+
+	writel(val, pcie->base + msi->reg_offsets[eq][reg]);

Same here for writel vs writel_relaxed.

We probably want writel_relaxed() when calling this from iproc_msi_handler(), but not when calling from iproc_msi_enable(), which should default to a normal writel(), so we can be sure it's actually configured right at the time we return from iproc_msi_init(). You could try to prove that using writel_relaxed is correct here, but using writel makes it so much easier.

Quoted 2 lines

Arnd

I need to think through the logic in iproc_msi_handler to make sure the correct accesses are used at the right place. The iproc_msi_handler needs to be re-written to support multiple MSI vectors per wired interrupt.

Thanks,

Ray

author maintainer
#12 lore raw

Re: [PATCH 4/5] PCI: iproc: Add iProc PCIe MSI support

In reply to Marc Zyngier

Hi Marc,

Quoted 186 lines · Marc Zyngier

On Tue, 17 Nov 2015 16:31:54 -0800
Ray Jui <[email protected]> wrote:

Hi Ray,

A few comments below.

Quoted 165 lines

This patch adds PCIe MSI support for both PAXB and PAXC interfaces on all iProc based platforms. The patch follows the latest trend in the kernel to use MSI domain based implementation

This iProc event queue based MSI support should not be used with newer platforms with integrated MSI support in the GIC (e.g., giv2m or gicv3-its)

---
  drivers/pci/host/Kconfig          |   9 +
  drivers/pci/host/Makefile         |   1 +
  drivers/pci/host/pcie-iproc-msi.c | 434 ++++++++++++++++++++++++++++++++++++++
  drivers/pci/host/pcie-iproc.c     |  19 ++
  drivers/pci/host/pcie-iproc.h     |  12 ++
  5 files changed, 475 insertions(+)

create mode 100644 drivers/pci/host/pcie-iproc-msi.c

drivers/pci/host/Kconfig +9 -0
index f131ba9..972e906 100644
@@ -126,6 +126,15 @@ config PCIE_IPROC
  	  iProc family of SoCs. An appropriate bus interface driver also needs
  	  to be enabled
 
+config PCIE_IPROC_MSI
+	bool "Broadcom iProc PCIe MSI support"
+	depends on ARCH_BCM_IPROC && PCI_MSI
+	select PCI_MSI_IRQ_DOMAIN
+	default ARCH_BCM_IPROC
+	help
+	  Say Y here if you want to enable MSI support for Broadcom's iProc
+	  PCIe controller
+
  config PCIE_IPROC_PLATFORM
  	tristate "Broadcom iProc PCIe platform bus driver"
  	depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST)
drivers/pci/host/Makefile +1 -0
index 9d4d3c6..0e4e95e 100644
@@ -15,6 +15,7 @@ obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
  obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
  obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
  obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
+obj-$(CONFIG_PCIE_IPROC_MSI) += pcie-iproc-msi.o
  obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
  obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
  obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
drivers/pci/host/pcie-iproc-msi.c new file +106 -0
new file mode 100644
index 0000000..a55c707
@@ -0,0 +1,434 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/msi.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+
+#include "pcie-iproc.h"
+
+#define IPROC_MSI_INTS_EN_OFFSET       0x208
+#define IPROC_MSI_INTR_EN_SHIFT        11
+#define IPROC_MSI_INTR_EN              BIT(IPROC_MSI_INTR_EN_SHIFT)
+#define IPROC_MSI_INT_N_EVENT_SHIFT    1
+#define IPROC_MSI_INT_N_EVENT          BIT(IPROC_MSI_INT_N_EVENT_SHIFT)
+#define IPROC_MSI_EQ_EN_SHIFT          0
+#define IPROC_MSI_EQ_EN                BIT(IPROC_MSI_EQ_EN_SHIFT)
+
+#define IPROC_MSI_EQ_MASK              0x3f
+
+/* number of queues in each event queue */
+#define IPROC_MSI_EQ_LEN               64
+
+/* size of each event queue memory region */
+#define EQ_MEM_REGION_SIZE           SZ_4K
+
+/* size of each MSI message memory region */
+#define MSI_MSG_MEM_REGION_SIZE      SZ_4K
+
+enum iproc_msi_reg {
+	IPROC_MSI_EQ_PAGE = 0,
+	IPROC_MSI_EQ_PAGE_UPPER,
+	IPROC_MSI_PAGE,
+	IPROC_MSI_PAGE_UPPER,
+	IPROC_MSI_CTRL,
+	IPROC_MSI_EQ_HEAD,
+	IPROC_MSI_EQ_TAIL,
+	IPROC_MSI_REG_SIZE,
+};
+
+/**
+ * iProc event queue based MSI
+ *
+ * Only meant to be used on platforms without MSI support integrated into the
+ * GIC
+ *
+ * @pcie: pointer to iProc PCIe data
+ * @reg_offsets: MSI register offsets
+ * @irqs: pointer to an array that contains the interrupt IDs
+ * @nirqs: number of total interrupts
+ * @has_inten_reg: indicates the MSI interrupt enable register needs to be
+ * set explicitly (required for some legacy platforms)
+ * @used: bitmap to track usage of MSI
+ * @inner_domain: inner IRQ domain
+ * @msi_domain: MSI IRQ domain
+ * @bitmap_lock: lock to protect access to the IRQ bitmap
+ * @n_eq_region: required number of 4K aligned memory region for MSI event
+ * queues
+ * @n_msi_msg_region: required number of 4K aligned memory region for MSI
+ * posted writes
+ * @eq_base: pointer to allocated memory region for MSI event queues
+ * @msi_base: pointer to allocated memory region for MSI posted writes
+ */
+struct iproc_msi {
+	struct iproc_pcie *pcie;
+	const u16 (*reg_offsets)[IPROC_MSI_REG_SIZE];
+	int *irqs;
+	int nirqs;
+	bool has_inten_reg;
+	DECLARE_BITMAP(used, IPROC_PCIE_MAX_NUM_IRQS);
+	struct irq_domain *inner_domain;
+	struct irq_domain *msi_domain;
+	struct mutex bitmap_lock;
+	unsigned int n_eq_region;
+	unsigned int n_msi_msg_region;
+	void *eq_base;
+	void *msi_base;
+};
+
+static const u16
+iproc_msi_reg_paxb[IPROC_PCIE_MAX_NUM_IRQS][IPROC_MSI_REG_SIZE] = {
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x210, 0x250, 0x254 },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x214, 0x258, 0x25c },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x218, 0x260, 0x264 },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x21c, 0x268, 0x26c },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x220, 0x270, 0x274 },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x224, 0x278, 0x27c },
+};
+
+static const u16
+iproc_msi_reg_paxc[IPROC_PCIE_MAX_NUM_IRQS][IPROC_MSI_REG_SIZE] = {
+	{ 0xc00, 0xc04, 0xc08, 0xc0c, 0xc40, 0xc50, 0xc60 },
+	{ 0xc10, 0xc14, 0xc18, 0xc1c, 0xc44, 0xc54, 0xc64 },
+	{ 0xc20, 0xc24, 0xc28, 0xc2c, 0xc48, 0xc58, 0xc68 },

drivers/pci/host/pcie-iproc-msi.c line 116

Quoted 10 lines
drivers/pci/host/pcie-iproc-msi.c new file +10 -0
+	{ 0xc30, 0xc34, 0xc38, 0xc3c, 0xc4c, 0xc5c, 0xc6c },
+};
+
+static inline u32 iproc_msi_read_reg(struct iproc_msi *msi,
+				     enum iproc_msi_reg reg,
+				     unsigned int eq)
+{
+	struct iproc_pcie *pcie = msi->pcie;
+
+	return readl(pcie->base + msi->reg_offsets[eq][reg]);

Do you need the extra barrier implied by readl? readl_relaxed should be enough.

Quoted 12 lines

drivers/pci/host/pcie-iproc-msi.c line 125

Quoted 9 lines
drivers/pci/host/pcie-iproc-msi.c new file +9 -0
+}
+
+static inline void iproc_msi_write_reg(struct iproc_msi *msi,
+				       enum iproc_msi_reg reg,
+				       int eq, u32 val)
+{
+	struct iproc_pcie *pcie = msi->pcie;
+
+	writel(val, pcie->base + msi->reg_offsets[eq][reg]);

Same here for writel vs writel_relaxed.

I probably do not need the barrier in most cases. But as we are dealing with MSI, I thought it's a lot safer to have the barrier in place so the CPU does not re-order the device register accesses with respect to other memory accesses?

Quoted 4 lines
Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+}
+
+static struct irq_chip iproc_msi_top_irq_chip = {
+	.name = "iProc MSI",
Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 133

Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+	.irq_enable = pci_msi_unmask_irq,
+	.irq_disable = pci_msi_mask_irq,
+	.irq_mask = pci_msi_mask_irq,
+	.irq_unmask = pci_msi_unmask_irq,

There is no need to provide both enable/disable and mask/unmask. And since pci_msi_{un}mask_irq is the default, you can get rid of these function pointers anyway.

Got it. Like you said, the mask/unmask callback are defaulted to pci_msi_{un}mask_irq in pci_msi_domain_update_chip_ops, called when the MSI irq domain is created.

I'll get rid of all the callback assignments here.

Quoted 7 lines
Quoted 7 lines
drivers/pci/host/pcie-iproc-msi.c new file +7 -0
+};
+
+static struct msi_domain_info iproc_msi_domain_info = {
+	.flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+		MSI_FLAG_PCI_MSIX,
+	.chip = &iproc_msi_top_irq_chip,
+};
Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 145

Quoted 5 lines
drivers/pci/host/pcie-iproc-msi.c new file +5 -0
+
+static int iproc_msi_irq_set_affinity(struct irq_data *data,
+				      const struct cpumask *mask, bool force)
+{
+	return -EINVAL;

I wish people would stop building stupid HW that prevents proper affinity setting for MSI...

In fact, there's no reason why the HW should prevent us from setting the MSI affinity. This is currently more of a SW issue that I have not spent enough time figuring out.

Here's my understanding:

In our system, each MSI is linked to a dedicated interrupt line connected to the GIC upstream (e.g., the GIC from Cortex A9 in Cygnus). Correct me if I'm wrong, to get the MSI affinity to work, all I need should be propagating the affinity setting to the GIC (the 1-to-1 mapping helps simply things quite a bit here)?

I tried to hook this up with irq_chip_set_affinity_parent. But it looks like the irq chip of the parent domain (i.e., the GIC) is pointing to NULL, and therefore it would crash when dereferencing it to get the irq_set_affinity callback.

I thought I did everything required by figuring out and linking to the correct parent domain in the iproc_msi_init routine:

parent_node = of_parse_phandle(node, "interrupt-parent", 0);

if (!parent_node) {
      dev_err(pcie->dev, "unable to parse MSI interrupt parent\n");
      return -ENODEV;
}

parent_domain = irq_find_host(parent_node);

if (!parent_domain) {
      dev_err(pcie->dev, "unable to get MSI parent domain\n");
      return -ENODEV;
}

...
...

msi->inner_domain = irq_domain_add_hierarchy(parent_domain, 0,

                                             msi->nirqs, NULL,
                                             &msi_domain_ops,
                                             msi);

I haven't spent too much time investigating, and am hoping to eventually enable affinity support with an incremental patch in the future when I have more time to investigate.

Quoted 28 lines
Quoted 28 lines
drivers/pci/host/pcie-iproc-msi.c new file +28 -0
+}
+
+static void iproc_msi_irq_compose_msi_msg(struct irq_data *data,
+					  struct msi_msg *msg)
+{
+	struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
+	phys_addr_t addr;
+
+	addr = virt_to_phys(msi->msi_base) | (data->hwirq * 4);
+	msg->address_lo = lower_32_bits(addr);
+	msg->address_hi = upper_32_bits(addr);
+	msg->data = data->hwirq;
+}
+
+static struct irq_chip iproc_msi_bottom_irq_chip = {
+	.name = "MSI",
+	.irq_set_affinity = iproc_msi_irq_set_affinity,
+	.irq_compose_msi_msg = iproc_msi_irq_compose_msi_msg,
+};
+
+static int iproc_msi_irq_domain_alloc(struct irq_domain *domain,
+				      unsigned int virq, unsigned int nr_irqs,
+				      void *args)
+{
+	struct iproc_msi *msi = domain->host_data;
+	int i, msi_irq;
+
+	mutex_lock(&msi->bitmap_lock);
Quoted 8 lines

drivers/pci/host/pcie-iproc-msi.c line 176

Quoted 3 lines
drivers/pci/host/pcie-iproc-msi.c new file +3 -0
+
+	for (i = 0; i < nr_irqs; i++) {
+		msi_irq = find_first_zero_bit(msi->used, msi->nirqs);

This is slightly puzzling. Do you really have at most 6 MSIs? Usually, we end up with a larger number of MSIs (32 or 64) multiplexed on top of a small number of wired interrupts. Here, you seem to have a 1-1 mapping. Is that really the case?

Yes, based on the poorly written iProc PCIe arch doc, :), we seem to have 1-1 mapping between each wired interrupt and MSI, with each MSI handled by an event queue, that consists of 64x word entries allocated from host memory (DDR). The MSI data is stored in the low 16-bit of each entry, whereas the upper 16-bit of each entry is reserved for the iProc PCIe controller for its own use.

Quoted 5 lines

If so (and assuming the wired interrupts are always contiguous), you shouldn't represent this as a chained interrupt (a multiplexer), but as a stacked irqchip, similar to what GICv2m does.

Okay, I think I might be missing something here, but I thought I currently have a stacked irqdomain (chip), i.e., GIC -> inner_domain -> MSI domain?

And does this imply I should expect 'nr_irqs' in this routine to be always zero and therefore I can get rid of the for loop here (same in the domain free routine)?

Quoted 63 lines
Quoted 63 lines
drivers/pci/host/pcie-iproc-msi.c new file +63 -0
+		if (msi_irq < msi->nirqs) {
+			set_bit(msi_irq, msi->used);
+		} else {
+			mutex_unlock(&msi->bitmap_lock);
+			return -ENOSPC;
+		}
+
+		irq_domain_set_info(domain, virq + i, msi_irq,
+				    &iproc_msi_bottom_irq_chip,
+				    domain->host_data, handle_simple_irq,
+				    NULL, NULL);
+	}
+
+	mutex_unlock(&msi->bitmap_lock);
+	return 0;
+}
+
+static void iproc_msi_irq_domain_free(struct irq_domain *domain,
+				      unsigned int virq, unsigned int nr_irqs)
+{
+	struct irq_data *data = irq_domain_get_irq_data(domain, virq);
+	struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
+	unsigned int i;
+
+	mutex_lock(&msi->bitmap_lock);
+
+	for (i = 0; i < nr_irqs; i++) {
+		struct irq_data *data = irq_domain_get_irq_data(domain,
+								virq + i);
+		if (!test_bit(data->hwirq, msi->used)) {
+			dev_warn(msi->pcie->dev, "freeing unused MSI %lu\n",
+				 data->hwirq);
+		} else
+			clear_bit(data->hwirq, msi->used);
+	}
+
+	mutex_unlock(&msi->bitmap_lock);
+	irq_domain_free_irqs_parent(domain, virq, nr_irqs);
+}
+
+static const struct irq_domain_ops msi_domain_ops = {
+	.alloc = iproc_msi_irq_domain_alloc,
+	.free = iproc_msi_irq_domain_free,
+};
+
+static void iproc_msi_enable(struct iproc_msi *msi)
+{
+	struct iproc_pcie *pcie = msi->pcie;
+	int i, eq;
+	u32 val;
+
+	/* program memory region for each event queue */
+	for (i = 0; i < msi->n_eq_region; i++) {
+		phys_addr_t addr =
+			virt_to_phys(msi->eq_base + (i * EQ_MEM_REGION_SIZE));
+
+		iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE, i,
+				    lower_32_bits(addr));
+		iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE_UPPER, i,
+				    upper_32_bits(addr));
+	}
+
+	/* program memory region for MSI posted writes */
Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 243

Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+	for (i = 0; i < msi->n_msi_msg_region; i++) {
+		phys_addr_t addr =
+			virt_to_phys(msi->msi_base +
+				     (i * MSI_MSG_MEM_REGION_SIZE));

You seem to be a victim of checkpatch. Please don't split statements like this, it just make it harder to read. My terminal can wrap lines very conveniently, and I don't care about the 80 character limit...

Okay will fix.

Quoted 54 lines
Quoted 54 lines
drivers/pci/host/pcie-iproc-msi.c new file +54 -0
+
+		iproc_msi_write_reg(msi, IPROC_MSI_PAGE, i,
+				    lower_32_bits(addr));
+		iproc_msi_write_reg(msi, IPROC_MSI_PAGE_UPPER, i,
+				    upper_32_bits(addr));
+	}
+
+	for (eq = 0; eq < msi->nirqs; eq++) {
+		/* enable MSI event queue */
+		val = IPROC_MSI_INTR_EN | IPROC_MSI_INT_N_EVENT |
+			IPROC_MSI_EQ_EN;
+		iproc_msi_write_reg(msi, IPROC_MSI_CTRL, eq, val);
+
+		/*
+		 * Some legacy platforms require the MSI interrupt enable
+		 * register to be set explicitly
+		 */
+		if (msi->has_inten_reg) {
+			val = readl(pcie->base + IPROC_MSI_INTS_EN_OFFSET);
+			val |= BIT(eq);
+			writel(val, pcie->base + IPROC_MSI_INTS_EN_OFFSET);
+		}
+	}
+}
+
+static void iproc_msi_handler(struct irq_desc *desc)
+{
+	unsigned int irq = irq_desc_get_irq(desc);
+	struct irq_chip *irq_chip = irq_desc_get_chip(desc);
+	struct iproc_msi *msi;
+	struct iproc_pcie *pcie;
+	u32 eq, head, tail, num_events;
+	int virq;
+
+	chained_irq_enter(irq_chip, desc);
+
+	msi = irq_get_handler_data(irq);
+	pcie = msi->pcie;
+
+	eq = irq - msi->irqs[0];
+	virq = irq_find_mapping(msi->inner_domain, eq);
+	head = iproc_msi_read_reg(msi, IPROC_MSI_EQ_HEAD, eq) &
+		IPROC_MSI_EQ_MASK;
+	do {
+		tail = iproc_msi_read_reg(msi, IPROC_MSI_EQ_TAIL, eq) &
+			IPROC_MSI_EQ_MASK;
+
+		num_events = (tail < head) ?
+			(IPROC_MSI_EQ_LEN - (head - tail)) : (tail - head);
+		if (!num_events)
+			break;
+
+		generic_handle_irq(virq);
+
Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 301

Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+		head++;
+		head %= IPROC_MSI_EQ_LEN;
+		iproc_msi_write_reg(msi, IPROC_MSI_EQ_HEAD, eq, head);
+	} while (true);

That's unusual. You seem to get only one interrupt for a bunch of MSIs, all representing the same IRQ? That feels very weird, as you can usually collapse edge interrupts.

I think we get one GIC interrupt per MSI line (1:1 mapping), but then the MSI data message can be more than one, stored in the event queue reserved for that MSI/interrupt line.

When you mentioned chained IRQ above, do you really mean the logic here? In fact, I don't think I really need to use the chained irq APIs here, as the MSI and GIC interrupt line has a 1-to-1 mapping.

Quoted 4 lines

drivers/pci/host/pcie-iproc-msi.c line 305

Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+
+	chained_irq_exit(irq_chip, desc);
+}
+

Can probably get rid of the chained_irq_enter and exit?

Quoted 123 lines
Quoted 123 lines
drivers/pci/host/pcie-iproc-msi.c new file +123 -0
+int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node)
+{
+	struct iproc_msi *msi;
+	struct device_node *parent_node;
+	struct irq_domain *parent_domain;
+	int i, ret;
+
+	if (!of_device_is_compatible(node, "brcm,iproc-msi"))
+		return -ENODEV;
+
+	if (!of_find_property(node, "msi-controller", NULL))
+		return -ENODEV;
+
+	parent_node = of_parse_phandle(node, "interrupt-parent", 0);
+	if (!parent_node) {
+		dev_err(pcie->dev, "unable to parse MSI interrupt parent\n");
+		return -ENODEV;
+	}
+
+	parent_domain = irq_find_host(parent_node);
+	if (!parent_domain) {
+		dev_err(pcie->dev, "unable to get MSI parent domain\n");
+		return -ENODEV;
+	}
+
+	msi = devm_kzalloc(pcie->dev, sizeof(*msi), GFP_KERNEL);
+	if (!msi)
+		return -ENOMEM;
+
+	msi->pcie = pcie;
+	mutex_init(&msi->bitmap_lock);
+
+	switch (pcie->type) {
+	case IPROC_PCIE_PAXB:
+		msi->reg_offsets = iproc_msi_reg_paxb;
+		break;
+	case IPROC_PCIE_PAXC:
+		msi->reg_offsets = iproc_msi_reg_paxc;
+		break;
+	default:
+		dev_err(pcie->dev, "incompatible iProc PCIe interface\n");
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32(node, "brcm,num-eq-region",
+				   &msi->n_eq_region);
+	if (ret || msi->n_eq_region == 0) {
+		dev_err(pcie->dev,
+			"invalid property 'brcm,num-eq-region' %u\n",
+			msi->n_eq_region);
+		return -ENODEV;
+	}
+
+	ret = of_property_read_u32(node, "brcm,num-msi-msg-region",
+				   &msi->n_msi_msg_region);
+	if (ret || msi->n_msi_msg_region == 0) {
+		dev_err(pcie->dev,
+			"invalid property 'brcm,num-msi-msg-region' %u\n",
+			msi->n_msi_msg_region);
+		return -ENODEV;
+	}
+
+	/* reserve memory for MSI event queue */
+	msi->eq_base = devm_kcalloc(pcie->dev, msi->n_eq_region + 1,
+				    EQ_MEM_REGION_SIZE, GFP_KERNEL);
+	if (!msi->eq_base)
+		return -ENOMEM;
+	msi->eq_base = PTR_ALIGN(msi->eq_base, EQ_MEM_REGION_SIZE);
+
+	/* reserve memory for MSI posted writes */
+	msi->msi_base = devm_kcalloc(pcie->dev, msi->n_msi_msg_region + 1,
+				     MSI_MSG_MEM_REGION_SIZE, GFP_KERNEL);
+	if (!msi->msi_base)
+		return -ENOMEM;
+	msi->msi_base = PTR_ALIGN(msi->msi_base, MSI_MSG_MEM_REGION_SIZE);
+
+	if (of_find_property(node, "brcm,pcie-msi-inten", NULL))
+		msi->has_inten_reg = true;
+
+	msi->nirqs = of_irq_count(node);
+	if (!msi->nirqs) {
+		dev_err(pcie->dev, "found no MSI interrupt in DT\n");
+		return -ENODEV;
+	}
+	if (msi->nirqs > IPROC_PCIE_MAX_NUM_IRQS) {
+		dev_warn(pcie->dev, "too many MSI interrupts defined %d\n",
+			 msi->nirqs);
+		msi->nirqs = IPROC_PCIE_MAX_NUM_IRQS;
+	}
+	msi->irqs = devm_kcalloc(pcie->dev, msi->nirqs, sizeof(*msi->irqs),
+				 GFP_KERNEL);
+	if (!msi->irqs)
+		return -ENOMEM;
+
+	for (i = 0; i < msi->nirqs; i++) {
+		msi->irqs[i] = irq_of_parse_and_map(node, i);
+		if (!msi->irqs[i]) {
+			dev_err(pcie->dev, "unable to parse/map interrupt\n");
+			return -ENODEV;
+		}
+	}
+
+	msi->inner_domain = irq_domain_add_hierarchy(parent_domain, 0,
+						     msi->nirqs, NULL,
+						     &msi_domain_ops,
+						     msi);
+	if (!msi->inner_domain) {
+		dev_err(pcie->dev, "failed to create inner domain\n");
+		return -ENOMEM;
+	}
+
+	msi->msi_domain = pci_msi_create_irq_domain(of_node_to_fwnode(node),
+						    &iproc_msi_domain_info,
+						    msi->inner_domain);
+	if (!msi->msi_domain) {
+		dev_err(pcie->dev, "failed to create MSI domain\n");
+		irq_domain_remove(msi->inner_domain);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < msi->nirqs; i++)
+		irq_set_chained_handler_and_data(msi->irqs[i],
+						 iproc_msi_handler, msi);
Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 434

Quoted 6 lines
drivers/pci/host/pcie-iproc-msi.c new file +6 -0
+
+	iproc_msi_enable(msi);
+
+	return 0;
+}
+EXPORT_SYMBOL(iproc_msi_init);

Do you really intend for this to be built as a standalone module?

The iProc MSI driver is statically linked in, but the iProc PCIe core driver can be built as a module. The EXPORT_SYMBOL here is for iproc_msi_init to be exported symbol to iProc PCIe core driver when built as module.

Quoted 45 lines
Quoted 45 lines
drivers/pci/host/pcie-iproc.c +19 -0
index 24d5b62..a575ef3 100644
@@ -440,6 +440,21 @@ static int iproc_pcie_map_ranges(struct iproc_pcie *pcie,
  	return 0;
  }
 
+static int iproc_pcie_msi_enable(struct iproc_pcie *pcie)
+{
+	struct device_node *msi_node;
+
+	msi_node = of_parse_phandle(pcie->dev->of_node, "msi-parent", 0);
+	if (!msi_node)
+		return -ENODEV;
+
+	/*
+	 * If another MSI controller is being used, the call below should fail
+	 * but that is okay
+	 */
+	return iproc_msi_init(pcie, msi_node);
+}
+
  int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
  {
  	int ret;
@@ -507,6 +522,10 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 
  	iproc_pcie_enable(pcie);
 
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		if (iproc_pcie_msi_enable(pcie))
+			dev_info(pcie->dev, "not using iProc MSI\n");
+
  	pci_scan_child_bus(bus);
  	pci_assign_unassigned_bus_resources(bus);
  	pci_fixup_irqs(pci_common_swizzle, pcie->map_irq);
drivers/pci/host/pcie-iproc.h +0 -0
index 051b651..17317ef 100644
@@ -14,6 +14,8 @@
  #ifndef _PCIE_IPROC_H
  #define _PCIE_IPROC_H
 
Quoted 6 lines

drivers/pci/host/pcie-iproc.h line 18

Quoted 2 lines
drivers/pci/host/pcie-iproc.h +2 -0
+#define IPROC_PCIE_MAX_NUM_IRQS 6
+

I don't see the point in putting this in an include file, as it is only used in a single location.

Okay. Will move it into pcie-iproc-msi.c

Quoted 21 lines
Quoted 8 lines
drivers/pci/host/pcie-iproc.h +1 -0
  /**
   * iProc PCIe interface type
   *
@@ -74,4 +76,14 @@ struct iproc_pcie {
  int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res);
  int iproc_pcie_remove(struct iproc_pcie *pcie);
 
+#ifdef CONFIG_PCI_MSI

drivers/pci/host/pcie-iproc.h struct iproc_pcie { · line 89

Quoted 10 lines
drivers/pci/host/pcie-iproc.h +9 -0
+int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node);
+#else
+static inline int iproc_msi_init(struct iproc_pcie *pcie,
+				 struct device_node *node)
+{
+	return -ENODEV;
+}
+#endif
+
  #endif /* _PCIE_IPROC_H */

Thanks,

Quoted 2 lines
	M.

Thanks a lot for the review. I really appreciate it!

Ray

author maintainer
#13 lore raw

Re: [PATCH 4/5] PCI: iproc: Add iProc PCIe MSI support

Hi Marc,

Quoted 23 lines · Ray Jui

Hi Marc,

Quoted 19 lines · Marc Zyngier

drivers/pci/host/pcie-iproc-msi.c line 176

Quoted 11 lines · On Tue, 17 Nov 2015 16:31:54 -0800 Ray Jui <[email protected]> wrote:
drivers/pci/host/pcie-iproc-msi.c new file +11 -0
+static int iproc_msi_irq_domain_alloc(struct irq_domain *domain,
+                      unsigned int virq, unsigned int nr_irqs,
+                      void *args)
+{
+    struct iproc_msi *msi = domain->host_data;
+    int i, msi_irq;
+
+    mutex_lock(&msi->bitmap_lock);
+
+    for (i = 0; i < nr_irqs; i++) {
+        msi_irq = find_first_zero_bit(msi->used, msi->nirqs);

This is slightly puzzling. Do you really have at most 6 MSIs? Usually, we end up with a larger number of MSIs (32 or 64) multiplexed on top of a small number of wired interrupts. Here, you seem to have a 1-1 mapping. Is that really the case?

Quoted 7 lines

Yes, based on the poorly written iProc PCIe arch doc, :), we seem to have 1-1 mapping between each wired interrupt and MSI, with each MSI handled by an event queue, that consists of 64x word entries allocated from host memory (DDR). The MSI data is stored in the low 16-bit of each entry, whereas the upper 16-bit of each entry is reserved for the iProc PCIe controller for its own use.

In fact, let me confirm with our ASIC team on the above statement. The iProc PCIe arch doc is in fact not very clear on this....

Quoted 6 lines
Quoted 5 lines

If so (and assuming the wired interrupts are always contiguous), you shouldn't represent this as a chained interrupt (a multiplexer), but as a stacked irqchip, similar to what GICv2m does.

Quoted 8 lines

Okay, I think I might be missing something here, but I thought I currently have a stacked irqdomain (chip), i.e., GIC -> inner_domain -> MSI domain?

And does this imply I should expect 'nr_irqs' in this routine to be always zero and therefore I can get rid of the for loop here (same in the domain free routine)?

Thanks,

Ray

author maintainer
#14 lore raw

Re: [PATCH 4/5] PCI: iproc: Add iProc PCIe MSI support

In reply to Ray Jui

Hi Marc,

Quoted 251 lines · Ray Jui

Hi Marc,

Quoted 193 lines · Marc Zyngier

On Tue, 17 Nov 2015 16:31:54 -0800
Ray Jui <[email protected]> wrote:

Hi Ray,

A few comments below.

Quoted 172 lines

This patch adds PCIe MSI support for both PAXB and PAXC interfaces on all iProc based platforms. The patch follows the latest trend in the kernel to use MSI domain based implementation

This iProc event queue based MSI support should not be used with newer platforms with integrated MSI support in the GIC (e.g., giv2m or gicv3-its)

---
  drivers/pci/host/Kconfig          |   9 +
  drivers/pci/host/Makefile         |   1 +
  drivers/pci/host/pcie-iproc-msi.c | 434
++++++++++++++++++++++++++++++++++++++
  drivers/pci/host/pcie-iproc.c     |  19 ++
  drivers/pci/host/pcie-iproc.h     |  12 ++
  5 files changed, 475 insertions(+)

create mode 100644 drivers/pci/host/pcie-iproc-msi.c

drivers/pci/host/Kconfig +0 -0
index f131ba9..972e906 100644
@@ -126,6 +126,15 @@ config PCIE_IPROC
        iProc family of SoCs. An appropriate bus interface driver

also needs
to be enabled

drivers/pci/host/Kconfig +9 -0
+config PCIE_IPROC_MSI
+    bool "Broadcom iProc PCIe MSI support"
+    depends on ARCH_BCM_IPROC && PCI_MSI
+    select PCI_MSI_IRQ_DOMAIN
+    default ARCH_BCM_IPROC
+    help
+      Say Y here if you want to enable MSI support for Broadcom's iProc
+      PCIe controller
+
  config PCIE_IPROC_PLATFORM
      tristate "Broadcom iProc PCIe platform bus driver"
      depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST)
drivers/pci/host/Makefile +1 -0
index 9d4d3c6..0e4e95e 100644
@@ -15,6 +15,7 @@ obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
  obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
  obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
  obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
+obj-$(CONFIG_PCIE_IPROC_MSI) += pcie-iproc-msi.o
  obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
  obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
  obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
drivers/pci/host/pcie-iproc-msi.c new file +56 -0
new file mode 100644
index 0000000..a55c707
@@ -0,0 +1,434 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/msi.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+
+#include "pcie-iproc.h"
+
+#define IPROC_MSI_INTS_EN_OFFSET       0x208
+#define IPROC_MSI_INTR_EN_SHIFT        11
+#define IPROC_MSI_INTR_EN              BIT(IPROC_MSI_INTR_EN_SHIFT)
+#define IPROC_MSI_INT_N_EVENT_SHIFT    1
+#define IPROC_MSI_INT_N_EVENT          BIT(IPROC_MSI_INT_N_EVENT_SHIFT)
+#define IPROC_MSI_EQ_EN_SHIFT          0
+#define IPROC_MSI_EQ_EN                BIT(IPROC_MSI_EQ_EN_SHIFT)
+
+#define IPROC_MSI_EQ_MASK              0x3f
+
+/* number of queues in each event queue */
+#define IPROC_MSI_EQ_LEN               64
+
+/* size of each event queue memory region */
+#define EQ_MEM_REGION_SIZE           SZ_4K
+
+/* size of each MSI message memory region */
+#define MSI_MSG_MEM_REGION_SIZE      SZ_4K
+
+enum iproc_msi_reg {
+    IPROC_MSI_EQ_PAGE = 0,
+    IPROC_MSI_EQ_PAGE_UPPER,
+    IPROC_MSI_PAGE,
+    IPROC_MSI_PAGE_UPPER,
+    IPROC_MSI_CTRL,
+    IPROC_MSI_EQ_HEAD,
+    IPROC_MSI_EQ_TAIL,
+    IPROC_MSI_REG_SIZE,
+};
+
+/**
+ * iProc event queue based MSI
+ *
+ * Only meant to be used on platforms without MSI support integrated

into the
+ * GIC
+ *
+ * @pcie: pointer to iProc PCIe data
+ * @reg_offsets: MSI register offsets
+ * @irqs: pointer to an array that contains the interrupt IDs
+ * @nirqs: number of total interrupts
+ * @has_inten_reg: indicates the MSI interrupt enable register needs to be
+ * set explicitly (required for some legacy platforms)
+ * @used: bitmap to track usage of MSI
+ * @inner_domain: inner IRQ domain
+ * @msi_domain: MSI IRQ domain
+ * @bitmap_lock: lock to protect access to the IRQ bitmap
+ * @n_eq_region: required number of 4K aligned memory region for MSI event
+ * queues
+ * @n_msi_msg_region: required number of 4K aligned memory region for MSI
+ * posted writes
+ * @eq_base: pointer to allocated memory region for MSI event queues
+ * @msi_base: pointer to allocated memory region for MSI posted writes
+ */

drivers/pci/host/pcie-iproc-msi.c new file +31 -0
+struct iproc_msi {
+    struct iproc_pcie *pcie;
+    const u16 (*reg_offsets)[IPROC_MSI_REG_SIZE];
+    int *irqs;
+    int nirqs;
+    bool has_inten_reg;
+    DECLARE_BITMAP(used, IPROC_PCIE_MAX_NUM_IRQS);
+    struct irq_domain *inner_domain;
+    struct irq_domain *msi_domain;
+    struct mutex bitmap_lock;
+    unsigned int n_eq_region;
+    unsigned int n_msi_msg_region;
+    void *eq_base;
+    void *msi_base;
+};
+
+static const u16
+iproc_msi_reg_paxb[IPROC_PCIE_MAX_NUM_IRQS][IPROC_MSI_REG_SIZE] = {
+    { 0x200, 0x2c0, 0x204, 0x2c4, 0x210, 0x250, 0x254 },
+    { 0x200, 0x2c0, 0x204, 0x2c4, 0x214, 0x258, 0x25c },
+    { 0x200, 0x2c0, 0x204, 0x2c4, 0x218, 0x260, 0x264 },
+    { 0x200, 0x2c0, 0x204, 0x2c4, 0x21c, 0x268, 0x26c },
+    { 0x200, 0x2c0, 0x204, 0x2c4, 0x220, 0x270, 0x274 },
+    { 0x200, 0x2c0, 0x204, 0x2c4, 0x224, 0x278, 0x27c },
+};
+
+static const u16
+iproc_msi_reg_paxc[IPROC_PCIE_MAX_NUM_IRQS][IPROC_MSI_REG_SIZE] = {
+    { 0xc00, 0xc04, 0xc08, 0xc0c, 0xc40, 0xc50, 0xc60 },
+    { 0xc10, 0xc14, 0xc18, 0xc1c, 0xc44, 0xc54, 0xc64 },
+    { 0xc20, 0xc24, 0xc28, 0xc2c, 0xc48, 0xc58, 0xc68 },

drivers/pci/host/pcie-iproc-msi.c line 116

Quoted 10 lines
drivers/pci/host/pcie-iproc-msi.c new file +10 -0
+    { 0xc30, 0xc34, 0xc38, 0xc3c, 0xc4c, 0xc5c, 0xc6c },
+};
+
+static inline u32 iproc_msi_read_reg(struct iproc_msi *msi,
+                     enum iproc_msi_reg reg,
+                     unsigned int eq)
+{
+    struct iproc_pcie *pcie = msi->pcie;
+
+    return readl(pcie->base + msi->reg_offsets[eq][reg]);

Do you need the extra barrier implied by readl? readl_relaxed should be enough.

Quoted 12 lines

drivers/pci/host/pcie-iproc-msi.c line 125

Quoted 9 lines
drivers/pci/host/pcie-iproc-msi.c new file +9 -0
+}
+
+static inline void iproc_msi_write_reg(struct iproc_msi *msi,
+                       enum iproc_msi_reg reg,
+                       int eq, u32 val)
+{
+    struct iproc_pcie *pcie = msi->pcie;
+
+    writel(val, pcie->base + msi->reg_offsets[eq][reg]);

Same here for writel vs writel_relaxed.

I probably do not need the barrier in most cases. But as we are dealing with MSI, I thought it's a lot safer to have the barrier in place so the CPU does not re-order the device register accesses with respect to other memory accesses?

Quoted 4 lines
Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+}
+
+static struct irq_chip iproc_msi_top_irq_chip = {
+    .name = "iProc MSI",
Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 133

Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+    .irq_enable = pci_msi_unmask_irq,
+    .irq_disable = pci_msi_mask_irq,
+    .irq_mask = pci_msi_mask_irq,
+    .irq_unmask = pci_msi_unmask_irq,

There is no need to provide both enable/disable and mask/unmask. And since pci_msi_{un}mask_irq is the default, you can get rid of these function pointers anyway.

Got it. Like you said, the mask/unmask callback are defaulted to pci_msi_{un}mask_irq in pci_msi_domain_update_chip_ops, called when the MSI irq domain is created.

I'll get rid of all the callback assignments here.

Quoted 7 lines
Quoted 7 lines
drivers/pci/host/pcie-iproc-msi.c new file +7 -0
+};
+
+static struct msi_domain_info iproc_msi_domain_info = {
+    .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+        MSI_FLAG_PCI_MSIX,
+    .chip = &iproc_msi_top_irq_chip,
+};
Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 145

Quoted 5 lines
drivers/pci/host/pcie-iproc-msi.c new file +5 -0
+
+static int iproc_msi_irq_set_affinity(struct irq_data *data,
+                      const struct cpumask *mask, bool force)
+{
+    return -EINVAL;

I wish people would stop building stupid HW that prevents proper affinity setting for MSI...

Quoted 8 lines

In fact, there's no reason why the HW should prevent us from setting the MSI affinity. This is currently more of a SW issue that I have not spent enough time figuring out.

Here's my understanding:

In our system, each MSI is linked to a dedicated interrupt line connected to the GIC upstream (e.g., the GIC from Cortex A9 in Cygnus).

Okay I need to take my words back. I just had a long meeting with our ASIC engineer. In fact, we are supposed to be able to support up to 64 MSI vectors per GIC interrupt line.

Quoted 3 lines

Correct me if I'm wrong, to get the MSI affinity to work, all I need should be propagating the affinity setting to the GIC (the 1-to-1 mapping helps simply things quite a bit here)?

Now MSI affinity gets much more complicated and I'm not sure how the HW can support it. I need more meetings with our ASIC engineers to figure this out. I'm not planning to support MSI IRQ affinity at this point.

Quoted 70 lines

I tried to hook this up with irq_chip_set_affinity_parent. But it looks like the irq chip of the parent domain (i.e., the GIC) is pointing to NULL, and therefore it would crash when dereferencing it to get the irq_set_affinity callback.

I thought I did everything required by figuring out and linking to the correct parent domain in the iproc_msi_init routine:

parent_node = of_parse_phandle(node, "interrupt-parent", 0);

if (!parent_node) {
       dev_err(pcie->dev, "unable to parse MSI interrupt parent\n");
       return -ENODEV;
}

parent_domain = irq_find_host(parent_node);

if (!parent_domain) {
       dev_err(pcie->dev, "unable to get MSI parent domain\n");
       return -ENODEV;
}

...
...

msi->inner_domain = irq_domain_add_hierarchy(parent_domain, 0,

                                              msi->nirqs, NULL,
                                              &msi_domain_ops,
                                              msi);

I haven't spent too much time investigating, and am hoping to eventually enable affinity support with an incremental patch in the future when I have more time to investigate.

Quoted 28 lines
Quoted 28 lines
drivers/pci/host/pcie-iproc-msi.c new file +28 -0
+}
+
+static void iproc_msi_irq_compose_msi_msg(struct irq_data *data,
+                      struct msi_msg *msg)
+{
+    struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
+    phys_addr_t addr;
+
+    addr = virt_to_phys(msi->msi_base) | (data->hwirq * 4);
+    msg->address_lo = lower_32_bits(addr);
+    msg->address_hi = upper_32_bits(addr);
+    msg->data = data->hwirq;
+}
+
+static struct irq_chip iproc_msi_bottom_irq_chip = {
+    .name = "MSI",
+    .irq_set_affinity = iproc_msi_irq_set_affinity,
+    .irq_compose_msi_msg = iproc_msi_irq_compose_msi_msg,
+};
+
+static int iproc_msi_irq_domain_alloc(struct irq_domain *domain,
+                      unsigned int virq, unsigned int nr_irqs,
+                      void *args)
+{
+    struct iproc_msi *msi = domain->host_data;
+    int i, msi_irq;
+
+    mutex_lock(&msi->bitmap_lock);
Quoted 8 lines

drivers/pci/host/pcie-iproc-msi.c line 176

Quoted 3 lines
drivers/pci/host/pcie-iproc-msi.c new file +3 -0
+
+    for (i = 0; i < nr_irqs; i++) {
+        msi_irq = find_first_zero_bit(msi->used, msi->nirqs);

This is slightly puzzling. Do you really have at most 6 MSIs? Usually, we end up with a larger number of MSIs (32 or 64) multiplexed on top of a small number of wired interrupts. Here, you seem to have a 1-1 mapping. Is that really the case?

Quoted 7 lines

Yes, based on the poorly written iProc PCIe arch doc, :), we seem to have 1-1 mapping between each wired interrupt and MSI, with each MSI handled by an event queue, that consists of 64x word entries allocated from host memory (DDR). The MSI data is stored in the low 16-bit of each entry, whereas the upper 16-bit of each entry is reserved for the iProc PCIe controller for its own use.

So yeah, you are right. We should be able to support up to 64 MSI vectors per interrupt. This is just embarrassing.... :(

And thanks for pointing this out.

Quoted 6 lines
Quoted 5 lines

If so (and assuming the wired interrupts are always contiguous), you shouldn't represent this as a chained interrupt (a multiplexer), but as a stacked irqchip, similar to what GICv2m does.

Quoted 7 lines

Okay, I think I might be missing something here, but I thought I currently have a stacked irqdomain (chip), i.e., GIC -> inner_domain -> MSI domain?

And does this imply I should expect 'nr_irqs' in this routine to be always zero and therefore I can get rid of the for loop here (same in the domain free routine)?

And yeah, chained IRQ will be used for all MSI vectors in each interrupt line.

Quoted 140 lines
Quoted 64 lines
Quoted 64 lines
drivers/pci/host/pcie-iproc-msi.c new file +63 -0
+        if (msi_irq < msi->nirqs) {
+            set_bit(msi_irq, msi->used);
+        } else {
+            mutex_unlock(&msi->bitmap_lock);
+            return -ENOSPC;
+        }
+
+        irq_domain_set_info(domain, virq + i, msi_irq,
+                    &iproc_msi_bottom_irq_chip,
+                    domain->host_data, handle_simple_irq,
+                    NULL, NULL);
+    }
+
+    mutex_unlock(&msi->bitmap_lock);
+    return 0;
+}
+
+static void iproc_msi_irq_domain_free(struct irq_domain *domain,
+                      unsigned int virq, unsigned int nr_irqs)
+{
+    struct irq_data *data = irq_domain_get_irq_data(domain, virq);
+    struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
+    unsigned int i;
+
+    mutex_lock(&msi->bitmap_lock);
+
+    for (i = 0; i < nr_irqs; i++) {
+        struct irq_data *data = irq_domain_get_irq_data(domain,
+                                virq + i);
+        if (!test_bit(data->hwirq, msi->used)) {
+            dev_warn(msi->pcie->dev, "freeing unused MSI %lu\n",
+                 data->hwirq);
+        } else
+            clear_bit(data->hwirq, msi->used);
+    }
+
+    mutex_unlock(&msi->bitmap_lock);
+    irq_domain_free_irqs_parent(domain, virq, nr_irqs);
+}
+
+static const struct irq_domain_ops msi_domain_ops = {
+    .alloc = iproc_msi_irq_domain_alloc,
+    .free = iproc_msi_irq_domain_free,
+};
+
+static void iproc_msi_enable(struct iproc_msi *msi)
+{
+    struct iproc_pcie *pcie = msi->pcie;
+    int i, eq;
+    u32 val;
+
+    /* program memory region for each event queue */
+    for (i = 0; i < msi->n_eq_region; i++) {
+        phys_addr_t addr =
+            virt_to_phys(msi->eq_base + (i * EQ_MEM_REGION_SIZE));
+
+        iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE, i,
+                    lower_32_bits(addr));
+        iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE_UPPER, i,
+                    upper_32_bits(addr));
+    }
+
+    /* program memory region for MSI posted writes */
Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 243

Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+    for (i = 0; i < msi->n_msi_msg_region; i++) {
+        phys_addr_t addr =
+            virt_to_phys(msi->msi_base +
+                     (i * MSI_MSG_MEM_REGION_SIZE));

You seem to be a victim of checkpatch. Please don't split statements like this, it just make it harder to read. My terminal can wrap lines very conveniently, and I don't care about the 80 character limit...

Okay will fix.

Quoted 54 lines
Quoted 54 lines
drivers/pci/host/pcie-iproc-msi.c new file +54 -0
+
+        iproc_msi_write_reg(msi, IPROC_MSI_PAGE, i,
+                    lower_32_bits(addr));
+        iproc_msi_write_reg(msi, IPROC_MSI_PAGE_UPPER, i,
+                    upper_32_bits(addr));
+    }
+
+    for (eq = 0; eq < msi->nirqs; eq++) {
+        /* enable MSI event queue */
+        val = IPROC_MSI_INTR_EN | IPROC_MSI_INT_N_EVENT |
+            IPROC_MSI_EQ_EN;
+        iproc_msi_write_reg(msi, IPROC_MSI_CTRL, eq, val);
+
+        /*
+         * Some legacy platforms require the MSI interrupt enable
+         * register to be set explicitly
+         */
+        if (msi->has_inten_reg) {
+            val = readl(pcie->base + IPROC_MSI_INTS_EN_OFFSET);
+            val |= BIT(eq);
+            writel(val, pcie->base + IPROC_MSI_INTS_EN_OFFSET);
+        }
+    }
+}
+
+static void iproc_msi_handler(struct irq_desc *desc)
+{
+    unsigned int irq = irq_desc_get_irq(desc);
+    struct irq_chip *irq_chip = irq_desc_get_chip(desc);
+    struct iproc_msi *msi;
+    struct iproc_pcie *pcie;
+    u32 eq, head, tail, num_events;
+    int virq;
+
+    chained_irq_enter(irq_chip, desc);
+
+    msi = irq_get_handler_data(irq);
+    pcie = msi->pcie;
+
+    eq = irq - msi->irqs[0];
+    virq = irq_find_mapping(msi->inner_domain, eq);
+    head = iproc_msi_read_reg(msi, IPROC_MSI_EQ_HEAD, eq) &
+        IPROC_MSI_EQ_MASK;
+    do {
+        tail = iproc_msi_read_reg(msi, IPROC_MSI_EQ_TAIL, eq) &
+            IPROC_MSI_EQ_MASK;
+
+        num_events = (tail < head) ?
+            (IPROC_MSI_EQ_LEN - (head - tail)) : (tail - head);
+        if (!num_events)
+            break;
+
+        generic_handle_irq(virq);
+
Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 301

Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+        head++;
+        head %= IPROC_MSI_EQ_LEN;
+        iproc_msi_write_reg(msi, IPROC_MSI_EQ_HEAD, eq, head);
+    } while (true);

That's unusual. You seem to get only one interrupt for a bunch of MSIs, all representing the same IRQ? That feels very weird, as you can usually collapse edge interrupts.

Quoted 8 lines

I think we get one GIC interrupt per MSI line (1:1 mapping), but then the MSI data message can be more than one, stored in the event queue reserved for that MSI/interrupt line.

When you mentioned chained IRQ above, do you really mean the logic here? In fact, I don't think I really need to use the chained irq APIs here, as the MSI and GIC interrupt line has a 1-to-1 mapping.

The above routine needs to be modified to:

go through the event queue and identify each MSI vector to be serviced, and service them by calling generic_handle_irq.

Quoted 226 lines
Quoted 4 lines

drivers/pci/host/pcie-iproc-msi.c line 305

Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+
+    chained_irq_exit(irq_chip, desc);
+}
+

Can probably get rid of the chained_irq_enter and exit?

Quoted 124 lines
Quoted 124 lines
drivers/pci/host/pcie-iproc-msi.c new file +112 -0
+int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node)
+{
+    struct iproc_msi *msi;
+    struct device_node *parent_node;
+    struct irq_domain *parent_domain;
+    int i, ret;
+
+    if (!of_device_is_compatible(node, "brcm,iproc-msi"))
+        return -ENODEV;
+
+    if (!of_find_property(node, "msi-controller", NULL))
+        return -ENODEV;
+
+    parent_node = of_parse_phandle(node, "interrupt-parent", 0);
+    if (!parent_node) {
+        dev_err(pcie->dev, "unable to parse MSI interrupt parent\n");
+        return -ENODEV;
+    }
+
+    parent_domain = irq_find_host(parent_node);
+    if (!parent_domain) {
+        dev_err(pcie->dev, "unable to get MSI parent domain\n");
+        return -ENODEV;
+    }
+
+    msi = devm_kzalloc(pcie->dev, sizeof(*msi), GFP_KERNEL);
+    if (!msi)
+        return -ENOMEM;
+
+    msi->pcie = pcie;
+    mutex_init(&msi->bitmap_lock);
+
+    switch (pcie->type) {
+    case IPROC_PCIE_PAXB:
+        msi->reg_offsets = iproc_msi_reg_paxb;
+        break;
+    case IPROC_PCIE_PAXC:
+        msi->reg_offsets = iproc_msi_reg_paxc;
+        break;
+    default:
+        dev_err(pcie->dev, "incompatible iProc PCIe interface\n");
+        return -EINVAL;
+    }
+
+    ret = of_property_read_u32(node, "brcm,num-eq-region",
+                   &msi->n_eq_region);
+    if (ret || msi->n_eq_region == 0) {
+        dev_err(pcie->dev,
+            "invalid property 'brcm,num-eq-region' %u\n",
+            msi->n_eq_region);
+        return -ENODEV;
+    }
+
+    ret = of_property_read_u32(node, "brcm,num-msi-msg-region",
+                   &msi->n_msi_msg_region);
+    if (ret || msi->n_msi_msg_region == 0) {
+        dev_err(pcie->dev,
+            "invalid property 'brcm,num-msi-msg-region' %u\n",
+            msi->n_msi_msg_region);
+        return -ENODEV;
+    }
+
+    /* reserve memory for MSI event queue */
+    msi->eq_base = devm_kcalloc(pcie->dev, msi->n_eq_region + 1,
+                    EQ_MEM_REGION_SIZE, GFP_KERNEL);
+    if (!msi->eq_base)
+        return -ENOMEM;
+    msi->eq_base = PTR_ALIGN(msi->eq_base, EQ_MEM_REGION_SIZE);
+
+    /* reserve memory for MSI posted writes */
+    msi->msi_base = devm_kcalloc(pcie->dev, msi->n_msi_msg_region + 1,
+                     MSI_MSG_MEM_REGION_SIZE, GFP_KERNEL);
+    if (!msi->msi_base)
+        return -ENOMEM;
+    msi->msi_base = PTR_ALIGN(msi->msi_base, MSI_MSG_MEM_REGION_SIZE);
+
+    if (of_find_property(node, "brcm,pcie-msi-inten", NULL))
+        msi->has_inten_reg = true;
+
+    msi->nirqs = of_irq_count(node);
+    if (!msi->nirqs) {
+        dev_err(pcie->dev, "found no MSI interrupt in DT\n");
+        return -ENODEV;
+    }
+    if (msi->nirqs > IPROC_PCIE_MAX_NUM_IRQS) {
+        dev_warn(pcie->dev, "too many MSI interrupts defined %d\n",
+             msi->nirqs);
+        msi->nirqs = IPROC_PCIE_MAX_NUM_IRQS;
+    }
+    msi->irqs = devm_kcalloc(pcie->dev, msi->nirqs, sizeof(*msi->irqs),
+                 GFP_KERNEL);
+    if (!msi->irqs)
+        return -ENOMEM;
+
+    for (i = 0; i < msi->nirqs; i++) {
+        msi->irqs[i] = irq_of_parse_and_map(node, i);
+        if (!msi->irqs[i]) {
+            dev_err(pcie->dev, "unable to parse/map interrupt\n");
+            return -ENODEV;
+        }
+    }
+
+    msi->inner_domain = irq_domain_add_hierarchy(parent_domain, 0,
+                             msi->nirqs, NULL,
+                             &msi_domain_ops,
+                             msi);
+    if (!msi->inner_domain) {
+        dev_err(pcie->dev, "failed to create inner domain\n");
+        return -ENOMEM;
+    }
+
+    msi->msi_domain =

pci_msi_create_irq_domain(of_node_to_fwnode(node),

drivers/pci/host/pcie-iproc-msi.c new file +11 -0
+                            &iproc_msi_domain_info,
+                            msi->inner_domain);
+    if (!msi->msi_domain) {
+        dev_err(pcie->dev, "failed to create MSI domain\n");
+        irq_domain_remove(msi->inner_domain);
+        return -ENOMEM;
+    }
+
+    for (i = 0; i < msi->nirqs; i++)
+        irq_set_chained_handler_and_data(msi->irqs[i],
+                         iproc_msi_handler, msi);
Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 434

Quoted 6 lines
drivers/pci/host/pcie-iproc-msi.c new file +6 -0
+
+    iproc_msi_enable(msi);
+
+    return 0;
+}
+EXPORT_SYMBOL(iproc_msi_init);

Do you really intend for this to be built as a standalone module?

The iProc MSI driver is statically linked in, but the iProc PCIe core driver can be built as a module. The EXPORT_SYMBOL here is for iproc_msi_init to be exported symbol to iProc PCIe core driver when built as module.

Quoted 50 lines
Quoted 50 lines
drivers/pci/host/pcie-iproc.c +10 -0
index 24d5b62..a575ef3 100644
@@ -440,6 +440,21 @@ static int iproc_pcie_map_ranges(struct
 iproc_pcie *pcie,
      return 0;
  }
 
+static int iproc_pcie_msi_enable(struct iproc_pcie *pcie)
+{
+    struct device_node *msi_node;
+
+    msi_node = of_parse_phandle(pcie->dev->of_node, "msi-parent", 0);
+    if (!msi_node)
+        return -ENODEV;
+
+    /*
+     * If another MSI controller is being used, the call below

should fail

drivers/pci/host/pcie-iproc.c +9 -0
+     * but that is okay
+     */
+    return iproc_msi_init(pcie, msi_node);
+}
+
  int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
  {
      int ret;
@@ -507,6 +522,10 @@ int iproc_pcie_setup(struct iproc_pcie *pcie,
 struct list_head *res)
 
      iproc_pcie_enable(pcie);
 
+    if (IS_ENABLED(CONFIG_PCI_MSI))
+        if (iproc_pcie_msi_enable(pcie))
+            dev_info(pcie->dev, "not using iProc MSI\n");
+
      pci_scan_child_bus(bus);
      pci_assign_unassigned_bus_resources(bus);
      pci_fixup_irqs(pci_common_swizzle, pcie->map_irq);
drivers/pci/host/pcie-iproc.h +0 -0
index 051b651..17317ef 100644
@@ -14,6 +14,8 @@
  #ifndef _PCIE_IPROC_H
  #define _PCIE_IPROC_H
 
Quoted 6 lines

drivers/pci/host/pcie-iproc.h line 18

Quoted 2 lines
drivers/pci/host/pcie-iproc.h +2 -0
+#define IPROC_PCIE_MAX_NUM_IRQS 6
+

I don't see the point in putting this in an include file, as it is only used in a single location.

Okay. Will move it into pcie-iproc-msi.c

Quoted 21 lines
Quoted 8 lines
drivers/pci/host/pcie-iproc.h +1 -0
  /**
   * iProc PCIe interface type
   *
@@ -74,4 +76,14 @@ struct iproc_pcie {
  int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res);
  int iproc_pcie_remove(struct iproc_pcie *pcie);
 
+#ifdef CONFIG_PCI_MSI

drivers/pci/host/pcie-iproc.h struct iproc_pcie { · line 89

Quoted 10 lines
drivers/pci/host/pcie-iproc.h +9 -0
+int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node);
+#else
+static inline int iproc_msi_init(struct iproc_pcie *pcie,
+                 struct device_node *node)
+{
+    return -ENODEV;
+}
+#endif
+
  #endif /* _PCIE_IPROC_H */

Thanks,

Quoted 6 lines
Quoted 2 lines
    M.

Thanks a lot for the review. I really appreciate it!

Ray

Thanks,

Ray

#15 lore raw

Re: [PATCH 4/5] PCI: iproc: Add iProc PCIe MSI support

In reply to Ray Jui
Quoted 13 lines · On Wednesday 18 November 2015 17:37:16 Ray Jui wrote:
Quoted 12 lines

drivers/pci/host/pcie-iproc-msi.c line 125

Quoted 9 lines
drivers/pci/host/pcie-iproc-msi.c new file +9 -0
+}
+
+static inline void iproc_msi_write_reg(struct iproc_msi *msi,
+                                   enum iproc_msi_reg reg,
+                                   int eq, u32 val)
+{
+    struct iproc_pcie *pcie = msi->pcie;
+
+    writel(val, pcie->base + msi->reg_offsets[eq][reg]);

Same here for writel vs writel_relaxed.

Quoted 4 lines

I probably do not need the barrier in most cases. But as we are dealing with MSI, I thought it's a lot safer to have the barrier in place so the CPU does not re-order the device register accesses with respect to other memory accesses?

See my other reply on that. For the actual handler, it makes sense to carefully think of all the possible side-effects and eliminate the barrier if possible, but for all other callers the performance doesn't matter and we should default to using readl/writel.

Quoted 52 lines
Quoted 7 lines
Quoted 7 lines
drivers/pci/host/pcie-iproc-msi.c new file +7 -0
+};
+
+static struct msi_domain_info iproc_msi_domain_info = {
+    .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+            MSI_FLAG_PCI_MSIX,
+    .chip = &iproc_msi_top_irq_chip,
+};
Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 145

Quoted 5 lines
drivers/pci/host/pcie-iproc-msi.c new file +5 -0
+
+static int iproc_msi_irq_set_affinity(struct irq_data *data,
+                                  const struct cpumask *mask, bool force)
+{
+    return -EINVAL;

I wish people would stop building stupid HW that prevents proper affinity setting for MSI...

In fact, there's no reason why the HW should prevent us from setting the MSI affinity. This is currently more of a SW issue that I have not spent enough time figuring out.

Here's my understanding:

In our system, each MSI is linked to a dedicated interrupt line connected to the GIC upstream (e.g., the GIC from Cortex A9 in Cygnus). Correct me if I'm wrong, to get the MSI affinity to work, all I need should be propagating the affinity setting to the GIC (the 1-to-1 mapping helps simply things quite a bit here)?

I tried to hook this up with irq_chip_set_affinity_parent. But it looks like the irq chip of the parent domain (i.e., the GIC) is pointing to NULL, and therefore it would crash when dereferencing it to get the irq_set_affinity callback.

I thought I did everything required by figuring out and linking to the correct parent domain in the iproc_msi_init routine:

parent_node = of_parse_phandle(node, "interrupt-parent", 0);

if (!parent_node) {
       dev_err(pcie->dev, "unable to parse MSI interrupt parent\n");
       return -ENODEV;
}

parent_domain = irq_find_host(parent_node);

if (!parent_domain) {
       dev_err(pcie->dev, "unable to get MSI parent domain\n");
       return -ENODEV;
}

...
...

Quoted 8 lines

msi->inner_domain = irq_domain_add_hierarchy(parent_domain, 0,

                                              msi->nirqs, NULL,
                                              &msi_domain_ops,
                                              msi);

I haven't spent too much time investigating, and am hoping to eventually enable affinity support with an incremental patch in the future when I have more time to investigate.

Is it possible that you have a set of MSIs per GIC interrupt (as Marc suggested earlier) and that the way it is intended to be used is by having each one of them target a different CPU? That way you can do affinity by switching to a different MSI in .set_affinity(), I think that is how the old style MSI all used to work when each CPU had its own MSI register.

Arnd

author maintainer
#16 lore raw

Re: [PATCH 4/5] PCI: iproc: Add iProc PCIe MSI support

Hi Arnd,

Quoted 6 lines · Arnd Bergmann
Quoted 3 lines · On Wednesday 18 November 2015 17:37:16 Ray Jui wrote:

I haven't spent too much time investigating, and am hoping to eventually enable affinity support with an incremental patch in the future when I have more time to investigate.

Quoted 9 lines

Is it possible that you have a set of MSIs per GIC interrupt (as Marc suggested earlier) and that the way it is intended to be used is by having each one of them target a different CPU? That way you can do affinity by switching to a different MSI in .set_affinity(), I think that is how the old style MSI all used to work when each CPU had its own MSI register.

Arnd

Okay, I see that Xgene MSI has a very similar implementation to support MSI IRQ affinity. I plan to take a closer look and try it out in the future. But it likely won't be included in the current round of patch set.

Thanks,

Ray

#17 lore raw

Re: [PATCH 4/5] PCI: iproc: Add iProc PCIe MSI support

In reply to Ray Jui
Quoted 279 lines · Ray Jui

Hi Marc,

Quoted 186 lines · Marc Zyngier

On Tue, 17 Nov 2015 16:31:54 -0800
Ray Jui <[email protected]> wrote:

Hi Ray,

A few comments below.

Quoted 165 lines

This patch adds PCIe MSI support for both PAXB and PAXC interfaces on all iProc based platforms. The patch follows the latest trend in the kernel to use MSI domain based implementation

This iProc event queue based MSI support should not be used with newer platforms with integrated MSI support in the GIC (e.g., giv2m or gicv3-its)

---
  drivers/pci/host/Kconfig          |   9 +
  drivers/pci/host/Makefile         |   1 +
  drivers/pci/host/pcie-iproc-msi.c | 434 ++++++++++++++++++++++++++++++++++++++
  drivers/pci/host/pcie-iproc.c     |  19 ++
  drivers/pci/host/pcie-iproc.h     |  12 ++
  5 files changed, 475 insertions(+)

create mode 100644 drivers/pci/host/pcie-iproc-msi.c

drivers/pci/host/Kconfig +9 -0
index f131ba9..972e906 100644
@@ -126,6 +126,15 @@ config PCIE_IPROC
  	  iProc family of SoCs. An appropriate bus interface driver also needs
  	  to be enabled
 
+config PCIE_IPROC_MSI
+	bool "Broadcom iProc PCIe MSI support"
+	depends on ARCH_BCM_IPROC && PCI_MSI
+	select PCI_MSI_IRQ_DOMAIN
+	default ARCH_BCM_IPROC
+	help
+	  Say Y here if you want to enable MSI support for Broadcom's iProc
+	  PCIe controller
+
  config PCIE_IPROC_PLATFORM
  	tristate "Broadcom iProc PCIe platform bus driver"
  	depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST)
drivers/pci/host/Makefile +1 -0
index 9d4d3c6..0e4e95e 100644
@@ -15,6 +15,7 @@ obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
  obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
  obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
  obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
+obj-$(CONFIG_PCIE_IPROC_MSI) += pcie-iproc-msi.o
  obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
  obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
  obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
drivers/pci/host/pcie-iproc-msi.c new file +106 -0
new file mode 100644
index 0000000..a55c707
@@ -0,0 +1,434 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/msi.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+
+#include "pcie-iproc.h"
+
+#define IPROC_MSI_INTS_EN_OFFSET       0x208
+#define IPROC_MSI_INTR_EN_SHIFT        11
+#define IPROC_MSI_INTR_EN              BIT(IPROC_MSI_INTR_EN_SHIFT)
+#define IPROC_MSI_INT_N_EVENT_SHIFT    1
+#define IPROC_MSI_INT_N_EVENT          BIT(IPROC_MSI_INT_N_EVENT_SHIFT)
+#define IPROC_MSI_EQ_EN_SHIFT          0
+#define IPROC_MSI_EQ_EN                BIT(IPROC_MSI_EQ_EN_SHIFT)
+
+#define IPROC_MSI_EQ_MASK              0x3f
+
+/* number of queues in each event queue */
+#define IPROC_MSI_EQ_LEN               64
+
+/* size of each event queue memory region */
+#define EQ_MEM_REGION_SIZE           SZ_4K
+
+/* size of each MSI message memory region */
+#define MSI_MSG_MEM_REGION_SIZE      SZ_4K
+
+enum iproc_msi_reg {
+	IPROC_MSI_EQ_PAGE = 0,
+	IPROC_MSI_EQ_PAGE_UPPER,
+	IPROC_MSI_PAGE,
+	IPROC_MSI_PAGE_UPPER,
+	IPROC_MSI_CTRL,
+	IPROC_MSI_EQ_HEAD,
+	IPROC_MSI_EQ_TAIL,
+	IPROC_MSI_REG_SIZE,
+};
+
+/**
+ * iProc event queue based MSI
+ *
+ * Only meant to be used on platforms without MSI support integrated into the
+ * GIC
+ *
+ * @pcie: pointer to iProc PCIe data
+ * @reg_offsets: MSI register offsets
+ * @irqs: pointer to an array that contains the interrupt IDs
+ * @nirqs: number of total interrupts
+ * @has_inten_reg: indicates the MSI interrupt enable register needs to be
+ * set explicitly (required for some legacy platforms)
+ * @used: bitmap to track usage of MSI
+ * @inner_domain: inner IRQ domain
+ * @msi_domain: MSI IRQ domain
+ * @bitmap_lock: lock to protect access to the IRQ bitmap
+ * @n_eq_region: required number of 4K aligned memory region for MSI event
+ * queues
+ * @n_msi_msg_region: required number of 4K aligned memory region for MSI
+ * posted writes
+ * @eq_base: pointer to allocated memory region for MSI event queues
+ * @msi_base: pointer to allocated memory region for MSI posted writes
+ */
+struct iproc_msi {
+	struct iproc_pcie *pcie;
+	const u16 (*reg_offsets)[IPROC_MSI_REG_SIZE];
+	int *irqs;
+	int nirqs;
+	bool has_inten_reg;
+	DECLARE_BITMAP(used, IPROC_PCIE_MAX_NUM_IRQS);
+	struct irq_domain *inner_domain;
+	struct irq_domain *msi_domain;
+	struct mutex bitmap_lock;
+	unsigned int n_eq_region;
+	unsigned int n_msi_msg_region;
+	void *eq_base;
+	void *msi_base;
+};
+
+static const u16
+iproc_msi_reg_paxb[IPROC_PCIE_MAX_NUM_IRQS][IPROC_MSI_REG_SIZE] = {
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x210, 0x250, 0x254 },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x214, 0x258, 0x25c },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x218, 0x260, 0x264 },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x21c, 0x268, 0x26c },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x220, 0x270, 0x274 },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x224, 0x278, 0x27c },
+};
+
+static const u16
+iproc_msi_reg_paxc[IPROC_PCIE_MAX_NUM_IRQS][IPROC_MSI_REG_SIZE] = {
+	{ 0xc00, 0xc04, 0xc08, 0xc0c, 0xc40, 0xc50, 0xc60 },
+	{ 0xc10, 0xc14, 0xc18, 0xc1c, 0xc44, 0xc54, 0xc64 },
+	{ 0xc20, 0xc24, 0xc28, 0xc2c, 0xc48, 0xc58, 0xc68 },

drivers/pci/host/pcie-iproc-msi.c line 116

Quoted 10 lines
drivers/pci/host/pcie-iproc-msi.c new file +10 -0
+	{ 0xc30, 0xc34, 0xc38, 0xc3c, 0xc4c, 0xc5c, 0xc6c },
+};
+
+static inline u32 iproc_msi_read_reg(struct iproc_msi *msi,
+				     enum iproc_msi_reg reg,
+				     unsigned int eq)
+{
+	struct iproc_pcie *pcie = msi->pcie;
+
+	return readl(pcie->base + msi->reg_offsets[eq][reg]);

Do you need the extra barrier implied by readl? readl_relaxed should be enough.

Quoted 12 lines

drivers/pci/host/pcie-iproc-msi.c line 125

Quoted 9 lines
drivers/pci/host/pcie-iproc-msi.c new file +9 -0
+}
+
+static inline void iproc_msi_write_reg(struct iproc_msi *msi,
+				       enum iproc_msi_reg reg,
+				       int eq, u32 val)
+{
+	struct iproc_pcie *pcie = msi->pcie;
+
+	writel(val, pcie->base + msi->reg_offsets[eq][reg]);

Same here for writel vs writel_relaxed.

I probably do not need the barrier in most cases. But as we are dealing with MSI, I thought it's a lot safer to have the barrier in place so the CPU does not re-order the device register accesses with respect to other memory accesses?

Quoted 4 lines
Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+}
+
+static struct irq_chip iproc_msi_top_irq_chip = {
+	.name = "iProc MSI",
Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 133

Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+	.irq_enable = pci_msi_unmask_irq,
+	.irq_disable = pci_msi_mask_irq,
+	.irq_mask = pci_msi_mask_irq,
+	.irq_unmask = pci_msi_unmask_irq,

There is no need to provide both enable/disable and mask/unmask. And since pci_msi_{un}mask_irq is the default, you can get rid of these function pointers anyway.

Got it. Like you said, the mask/unmask callback are defaulted to pci_msi_{un}mask_irq in pci_msi_domain_update_chip_ops, called when the MSI irq domain is created.

I'll get rid of all the callback assignments here.

Quoted 7 lines
Quoted 7 lines
drivers/pci/host/pcie-iproc-msi.c new file +7 -0
+};
+
+static struct msi_domain_info iproc_msi_domain_info = {
+	.flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+		MSI_FLAG_PCI_MSIX,
+	.chip = &iproc_msi_top_irq_chip,
+};
Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 145

Quoted 5 lines
drivers/pci/host/pcie-iproc-msi.c new file +5 -0
+
+static int iproc_msi_irq_set_affinity(struct irq_data *data,
+				      const struct cpumask *mask, bool force)
+{
+	return -EINVAL;

I wish people would stop building stupid HW that prevents proper affinity setting for MSI...

In fact, there's no reason why the HW should prevent us from setting the MSI affinity. This is currently more of a SW issue that I have not spent enough time figuring out.

Here's my understanding:

In our system, each MSI is linked to a dedicated interrupt line connected to the GIC upstream (e.g., the GIC from Cortex A9 in Cygnus). Correct me if I'm wrong, to get the MSI affinity to work, all I need should be propagating the affinity setting to the GIC (the 1-to-1 mapping helps simply things quite a bit here)?

I tried to hook this up with irq_chip_set_affinity_parent. But it looks like the irq chip of the parent domain (i.e., the GIC) is pointing to NULL, and therefore it would crash when dereferencing it to get the irq_set_affinity callback.

I thought I did everything required by figuring out and linking to the correct parent domain in the iproc_msi_init routine:

parent_node = of_parse_phandle(node, "interrupt-parent", 0);

if (!parent_node) {
       dev_err(pcie->dev, "unable to parse MSI interrupt parent\n");
       return -ENODEV;
}

parent_domain = irq_find_host(parent_node);

if (!parent_domain) {
       dev_err(pcie->dev, "unable to get MSI parent domain\n");
       return -ENODEV;
}

...
...

Quoted 8 lines

msi->inner_domain = irq_domain_add_hierarchy(parent_domain, 0,

                                              msi->nirqs, NULL,
                                              &msi_domain_ops,
                                              msi);

I haven't spent too much time investigating, and am hoping to eventually enable affinity support with an incremental patch in the future when I have more time to investigate.

It fails because you're not implementing a fully stacked system, but only a partial one (see below).

Quoted 37 lines
Quoted 28 lines
Quoted 28 lines
drivers/pci/host/pcie-iproc-msi.c new file +28 -0
+}
+
+static void iproc_msi_irq_compose_msi_msg(struct irq_data *data,
+					  struct msi_msg *msg)
+{
+	struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
+	phys_addr_t addr;
+
+	addr = virt_to_phys(msi->msi_base) | (data->hwirq * 4);
+	msg->address_lo = lower_32_bits(addr);
+	msg->address_hi = upper_32_bits(addr);
+	msg->data = data->hwirq;
+}
+
+static struct irq_chip iproc_msi_bottom_irq_chip = {
+	.name = "MSI",
+	.irq_set_affinity = iproc_msi_irq_set_affinity,
+	.irq_compose_msi_msg = iproc_msi_irq_compose_msi_msg,
+};
+
+static int iproc_msi_irq_domain_alloc(struct irq_domain *domain,
+				      unsigned int virq, unsigned int nr_irqs,
+				      void *args)
+{
+	struct iproc_msi *msi = domain->host_data;
+	int i, msi_irq;
+
+	mutex_lock(&msi->bitmap_lock);
Quoted 8 lines

drivers/pci/host/pcie-iproc-msi.c line 176

Quoted 3 lines
drivers/pci/host/pcie-iproc-msi.c new file +3 -0
+
+	for (i = 0; i < nr_irqs; i++) {
+		msi_irq = find_first_zero_bit(msi->used, msi->nirqs);

This is slightly puzzling. Do you really have at most 6 MSIs? Usually, we end up with a larger number of MSIs (32 or 64) multiplexed on top of a small number of wired interrupts. Here, you seem to have a 1-1 mapping. Is that really the case?

Quoted 6 lines

Yes, based on the poorly written iProc PCIe arch doc, :), we seem to have 1-1 mapping between each wired interrupt and MSI, with each MSI handled by an event queue, that consists of 64x word entries allocated from host memory (DDR). The MSI data is stored in the low 16-bit of each entry, whereas the upper 16-bit of each entry is reserved for the iProc PCIe controller for its own use.

Based on your description, I have a completely different interpretation of how your HW works:

You have 4 (or 6) doorbells (the location where your PCI device writes its MSI), and whatever the device writes ends up in the event queue. I'm pretty sure the HW doesn't interpret what the device writes at all. The GIC irqs are just a way to indicate that there is something in one of the queues.

This means that you wouldn't be limited to 4/6 MSIs, but that you could actually have a lot more (apparently 16 bits worth of MSIs), and you could use the doorbell address to change your affinity (one GIC interrupt per CPU, assuming you don't have more than 4 or 6).

Quoted 9 lines
Quoted 5 lines

If so (and assuming the wired interrupts are always contiguous), you shouldn't represent this as a chained interrupt (a multiplexer), but as a stacked irqchip, similar to what GICv2m does.

Okay, I think I might be missing something here, but I thought I currently have a stacked irqdomain (chip), i.e., GIC -> inner_domain -> MSI domain?

At the moment, you have one stacked domain (MSI -> iProc) that is used for a chained irqchip that feeds into the GIC.

What you could do is turning it into a stacked domain (MSI -> iProc -> GIC), using the fact that you have a 1:1 mapping between your MSIs and the GIC interrupts. But I'm now questionning that fact.

Quoted 3 lines

And does this imply I should expect 'nr_irqs' in this routine to be always zero and therefore I can get rid of the for loop here (same in the domain free routine)?

It should never be zero. It is likely to be always 1, as it is the number of contiguous MSIs that have to be allocated in one go, and is exclusively used for multi-MSI (which you don't claim to support).

Quoted 139 lines
Quoted 63 lines
Quoted 63 lines
drivers/pci/host/pcie-iproc-msi.c new file +63 -0
+		if (msi_irq < msi->nirqs) {
+			set_bit(msi_irq, msi->used);
+		} else {
+			mutex_unlock(&msi->bitmap_lock);
+			return -ENOSPC;
+		}
+
+		irq_domain_set_info(domain, virq + i, msi_irq,
+				    &iproc_msi_bottom_irq_chip,
+				    domain->host_data, handle_simple_irq,
+				    NULL, NULL);
+	}
+
+	mutex_unlock(&msi->bitmap_lock);
+	return 0;
+}
+
+static void iproc_msi_irq_domain_free(struct irq_domain *domain,
+				      unsigned int virq, unsigned int nr_irqs)
+{
+	struct irq_data *data = irq_domain_get_irq_data(domain, virq);
+	struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
+	unsigned int i;
+
+	mutex_lock(&msi->bitmap_lock);
+
+	for (i = 0; i < nr_irqs; i++) {
+		struct irq_data *data = irq_domain_get_irq_data(domain,
+								virq + i);
+		if (!test_bit(data->hwirq, msi->used)) {
+			dev_warn(msi->pcie->dev, "freeing unused MSI %lu\n",
+				 data->hwirq);
+		} else
+			clear_bit(data->hwirq, msi->used);
+	}
+
+	mutex_unlock(&msi->bitmap_lock);
+	irq_domain_free_irqs_parent(domain, virq, nr_irqs);
+}
+
+static const struct irq_domain_ops msi_domain_ops = {
+	.alloc = iproc_msi_irq_domain_alloc,
+	.free = iproc_msi_irq_domain_free,
+};
+
+static void iproc_msi_enable(struct iproc_msi *msi)
+{
+	struct iproc_pcie *pcie = msi->pcie;
+	int i, eq;
+	u32 val;
+
+	/* program memory region for each event queue */
+	for (i = 0; i < msi->n_eq_region; i++) {
+		phys_addr_t addr =
+			virt_to_phys(msi->eq_base + (i * EQ_MEM_REGION_SIZE));
+
+		iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE, i,
+				    lower_32_bits(addr));
+		iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE_UPPER, i,
+				    upper_32_bits(addr));
+	}
+
+	/* program memory region for MSI posted writes */
Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 243

Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+	for (i = 0; i < msi->n_msi_msg_region; i++) {
+		phys_addr_t addr =
+			virt_to_phys(msi->msi_base +
+				     (i * MSI_MSG_MEM_REGION_SIZE));

You seem to be a victim of checkpatch. Please don't split statements like this, it just make it harder to read. My terminal can wrap lines very conveniently, and I don't care about the 80 character limit...

Okay will fix.

Quoted 54 lines
Quoted 54 lines
drivers/pci/host/pcie-iproc-msi.c new file +54 -0
+
+		iproc_msi_write_reg(msi, IPROC_MSI_PAGE, i,
+				    lower_32_bits(addr));
+		iproc_msi_write_reg(msi, IPROC_MSI_PAGE_UPPER, i,
+				    upper_32_bits(addr));
+	}
+
+	for (eq = 0; eq < msi->nirqs; eq++) {
+		/* enable MSI event queue */
+		val = IPROC_MSI_INTR_EN | IPROC_MSI_INT_N_EVENT |
+			IPROC_MSI_EQ_EN;
+		iproc_msi_write_reg(msi, IPROC_MSI_CTRL, eq, val);
+
+		/*
+		 * Some legacy platforms require the MSI interrupt enable
+		 * register to be set explicitly
+		 */
+		if (msi->has_inten_reg) {
+			val = readl(pcie->base + IPROC_MSI_INTS_EN_OFFSET);
+			val |= BIT(eq);
+			writel(val, pcie->base + IPROC_MSI_INTS_EN_OFFSET);
+		}
+	}
+}
+
+static void iproc_msi_handler(struct irq_desc *desc)
+{
+	unsigned int irq = irq_desc_get_irq(desc);
+	struct irq_chip *irq_chip = irq_desc_get_chip(desc);
+	struct iproc_msi *msi;
+	struct iproc_pcie *pcie;
+	u32 eq, head, tail, num_events;
+	int virq;
+
+	chained_irq_enter(irq_chip, desc);
+
+	msi = irq_get_handler_data(irq);
+	pcie = msi->pcie;
+
+	eq = irq - msi->irqs[0];
+	virq = irq_find_mapping(msi->inner_domain, eq);
+	head = iproc_msi_read_reg(msi, IPROC_MSI_EQ_HEAD, eq) &
+		IPROC_MSI_EQ_MASK;
+	do {
+		tail = iproc_msi_read_reg(msi, IPROC_MSI_EQ_TAIL, eq) &
+			IPROC_MSI_EQ_MASK;
+
+		num_events = (tail < head) ?
+			(IPROC_MSI_EQ_LEN - (head - tail)) : (tail - head);
+		if (!num_events)
+			break;
+
+		generic_handle_irq(virq);
+
Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 301

Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+		head++;
+		head %= IPROC_MSI_EQ_LEN;
+		iproc_msi_write_reg(msi, IPROC_MSI_EQ_HEAD, eq, head);
+	} while (true);

That's unusual. You seem to get only one interrupt for a bunch of MSIs, all representing the same IRQ? That feels very weird, as you can usually collapse edge interrupts.

Quoted 3 lines

I think we get one GIC interrupt per MSI line (1:1 mapping), but then the MSI data message can be more than one, stored in the event queue reserved for that MSI/interrupt line.

But can you have different messages? Buffering the same message N times is pretty useless (you can coalesce MSIs), but I'd completely understand the design if you could store N different messages. If that's the case, then the HW design would actually be a lot saner (whoever thought that 4 or 6 MSIs would be enough needs a PCIe crash course...).

Quoted 3 lines

When you mentioned chained IRQ above, do you really mean the logic here? In fact, I don't think I really need to use the chained irq APIs here, as the MSI and GIC interrupt line has a 1-to-1 mapping.

If you definitely have a 1:1 mapping, and that you cannot store arbitrary messages in memory, then yes, you can switch to a fully stacked configuration.

Quoted 6 lines
Quoted 4 lines

drivers/pci/host/pcie-iproc-msi.c line 305

Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+
+	chained_irq_exit(irq_chip, desc);
+}
+

Can probably get rid of the chained_irq_enter and exit?

You could get rid of a lot more than that, but that depends on the above discussion.

Thanks,

	M.
Signature · 1 line
Jazz is not dead. It just smells funny...
author maintainer
#18 lore raw

Re: [PATCH 4/5] PCI: iproc: Add iProc PCIe MSI support

Hi Marc,

Quoted 336 lines · Marc Zyngier
Quoted 279 lines · Ray Jui

Hi Marc,

Quoted 186 lines · Marc Zyngier

On Tue, 17 Nov 2015 16:31:54 -0800
Ray Jui <[email protected]> wrote:

Hi Ray,

A few comments below.

Quoted 165 lines

This patch adds PCIe MSI support for both PAXB and PAXC interfaces on all iProc based platforms. The patch follows the latest trend in the kernel to use MSI domain based implementation

This iProc event queue based MSI support should not be used with newer platforms with integrated MSI support in the GIC (e.g., giv2m or gicv3-its)

---
   drivers/pci/host/Kconfig          |   9 +
   drivers/pci/host/Makefile         |   1 +
   drivers/pci/host/pcie-iproc-msi.c | 434 ++++++++++++++++++++++++++++++++++++++
   drivers/pci/host/pcie-iproc.c     |  19 ++
   drivers/pci/host/pcie-iproc.h     |  12 ++
   5 files changed, 475 insertions(+)

create mode 100644 drivers/pci/host/pcie-iproc-msi.c

drivers/pci/host/Kconfig +9 -0
index f131ba9..972e906 100644
@@ -126,6 +126,15 @@ config PCIE_IPROC
   	  iProc family of SoCs. An appropriate bus interface driver also needs
   	  to be enabled
 
+config PCIE_IPROC_MSI
+	bool "Broadcom iProc PCIe MSI support"
+	depends on ARCH_BCM_IPROC && PCI_MSI
+	select PCI_MSI_IRQ_DOMAIN
+	default ARCH_BCM_IPROC
+	help
+	  Say Y here if you want to enable MSI support for Broadcom's iProc
+	  PCIe controller
+
   config PCIE_IPROC_PLATFORM
   	tristate "Broadcom iProc PCIe platform bus driver"
   	depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST)
drivers/pci/host/Makefile +1 -0
index 9d4d3c6..0e4e95e 100644
@@ -15,6 +15,7 @@ obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
   obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
   obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
   obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
+obj-$(CONFIG_PCIE_IPROC_MSI) += pcie-iproc-msi.o
   obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
   obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
   obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
drivers/pci/host/pcie-iproc-msi.c new file +106 -0
new file mode 100644
index 0000000..a55c707
@@ -0,0 +1,434 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/msi.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+
+#include "pcie-iproc.h"
+
+#define IPROC_MSI_INTS_EN_OFFSET       0x208
+#define IPROC_MSI_INTR_EN_SHIFT        11
+#define IPROC_MSI_INTR_EN              BIT(IPROC_MSI_INTR_EN_SHIFT)
+#define IPROC_MSI_INT_N_EVENT_SHIFT    1
+#define IPROC_MSI_INT_N_EVENT          BIT(IPROC_MSI_INT_N_EVENT_SHIFT)
+#define IPROC_MSI_EQ_EN_SHIFT          0
+#define IPROC_MSI_EQ_EN                BIT(IPROC_MSI_EQ_EN_SHIFT)
+
+#define IPROC_MSI_EQ_MASK              0x3f
+
+/* number of queues in each event queue */
+#define IPROC_MSI_EQ_LEN               64
+
+/* size of each event queue memory region */
+#define EQ_MEM_REGION_SIZE           SZ_4K
+
+/* size of each MSI message memory region */
+#define MSI_MSG_MEM_REGION_SIZE      SZ_4K
+
+enum iproc_msi_reg {
+	IPROC_MSI_EQ_PAGE = 0,
+	IPROC_MSI_EQ_PAGE_UPPER,
+	IPROC_MSI_PAGE,
+	IPROC_MSI_PAGE_UPPER,
+	IPROC_MSI_CTRL,
+	IPROC_MSI_EQ_HEAD,
+	IPROC_MSI_EQ_TAIL,
+	IPROC_MSI_REG_SIZE,
+};
+
+/**
+ * iProc event queue based MSI
+ *
+ * Only meant to be used on platforms without MSI support integrated into the
+ * GIC
+ *
+ * @pcie: pointer to iProc PCIe data
+ * @reg_offsets: MSI register offsets
+ * @irqs: pointer to an array that contains the interrupt IDs
+ * @nirqs: number of total interrupts
+ * @has_inten_reg: indicates the MSI interrupt enable register needs to be
+ * set explicitly (required for some legacy platforms)
+ * @used: bitmap to track usage of MSI
+ * @inner_domain: inner IRQ domain
+ * @msi_domain: MSI IRQ domain
+ * @bitmap_lock: lock to protect access to the IRQ bitmap
+ * @n_eq_region: required number of 4K aligned memory region for MSI event
+ * queues
+ * @n_msi_msg_region: required number of 4K aligned memory region for MSI
+ * posted writes
+ * @eq_base: pointer to allocated memory region for MSI event queues
+ * @msi_base: pointer to allocated memory region for MSI posted writes
+ */
+struct iproc_msi {
+	struct iproc_pcie *pcie;
+	const u16 (*reg_offsets)[IPROC_MSI_REG_SIZE];
+	int *irqs;
+	int nirqs;
+	bool has_inten_reg;
+	DECLARE_BITMAP(used, IPROC_PCIE_MAX_NUM_IRQS);
+	struct irq_domain *inner_domain;
+	struct irq_domain *msi_domain;
+	struct mutex bitmap_lock;
+	unsigned int n_eq_region;
+	unsigned int n_msi_msg_region;
+	void *eq_base;
+	void *msi_base;
+};
+
+static const u16
+iproc_msi_reg_paxb[IPROC_PCIE_MAX_NUM_IRQS][IPROC_MSI_REG_SIZE] = {
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x210, 0x250, 0x254 },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x214, 0x258, 0x25c },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x218, 0x260, 0x264 },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x21c, 0x268, 0x26c },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x220, 0x270, 0x274 },
+	{ 0x200, 0x2c0, 0x204, 0x2c4, 0x224, 0x278, 0x27c },
+};
+
+static const u16
+iproc_msi_reg_paxc[IPROC_PCIE_MAX_NUM_IRQS][IPROC_MSI_REG_SIZE] = {
+	{ 0xc00, 0xc04, 0xc08, 0xc0c, 0xc40, 0xc50, 0xc60 },
+	{ 0xc10, 0xc14, 0xc18, 0xc1c, 0xc44, 0xc54, 0xc64 },
+	{ 0xc20, 0xc24, 0xc28, 0xc2c, 0xc48, 0xc58, 0xc68 },

drivers/pci/host/pcie-iproc-msi.c line 116

Quoted 10 lines
drivers/pci/host/pcie-iproc-msi.c new file +10 -0
+	{ 0xc30, 0xc34, 0xc38, 0xc3c, 0xc4c, 0xc5c, 0xc6c },
+};
+
+static inline u32 iproc_msi_read_reg(struct iproc_msi *msi,
+				     enum iproc_msi_reg reg,
+				     unsigned int eq)
+{
+	struct iproc_pcie *pcie = msi->pcie;
+
+	return readl(pcie->base + msi->reg_offsets[eq][reg]);

Do you need the extra barrier implied by readl? readl_relaxed should be enough.

Quoted 12 lines

drivers/pci/host/pcie-iproc-msi.c line 125

Quoted 9 lines
drivers/pci/host/pcie-iproc-msi.c new file +9 -0
+}
+
+static inline void iproc_msi_write_reg(struct iproc_msi *msi,
+				       enum iproc_msi_reg reg,
+				       int eq, u32 val)
+{
+	struct iproc_pcie *pcie = msi->pcie;
+
+	writel(val, pcie->base + msi->reg_offsets[eq][reg]);

Same here for writel vs writel_relaxed.

I probably do not need the barrier in most cases. But as we are dealing with MSI, I thought it's a lot safer to have the barrier in place so the CPU does not re-order the device register accesses with respect to other memory accesses?

Quoted 4 lines
Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+}
+
+static struct irq_chip iproc_msi_top_irq_chip = {
+	.name = "iProc MSI",
Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 133

Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+	.irq_enable = pci_msi_unmask_irq,
+	.irq_disable = pci_msi_mask_irq,
+	.irq_mask = pci_msi_mask_irq,
+	.irq_unmask = pci_msi_unmask_irq,

There is no need to provide both enable/disable and mask/unmask. And since pci_msi_{un}mask_irq is the default, you can get rid of these function pointers anyway.

Got it. Like you said, the mask/unmask callback are defaulted to pci_msi_{un}mask_irq in pci_msi_domain_update_chip_ops, called when the MSI irq domain is created.

I'll get rid of all the callback assignments here.

Quoted 7 lines
Quoted 7 lines
drivers/pci/host/pcie-iproc-msi.c new file +7 -0
+};
+
+static struct msi_domain_info iproc_msi_domain_info = {
+	.flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+		MSI_FLAG_PCI_MSIX,
+	.chip = &iproc_msi_top_irq_chip,
+};
Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 145

Quoted 5 lines
drivers/pci/host/pcie-iproc-msi.c new file +5 -0
+
+static int iproc_msi_irq_set_affinity(struct irq_data *data,
+				      const struct cpumask *mask, bool force)
+{
+	return -EINVAL;

I wish people would stop building stupid HW that prevents proper affinity setting for MSI...

In fact, there's no reason why the HW should prevent us from setting the MSI affinity. This is currently more of a SW issue that I have not spent enough time figuring out.

Here's my understanding:

In our system, each MSI is linked to a dedicated interrupt line connected to the GIC upstream (e.g., the GIC from Cortex A9 in Cygnus). Correct me if I'm wrong, to get the MSI affinity to work, all I need should be propagating the affinity setting to the GIC (the 1-to-1 mapping helps simply things quite a bit here)?

I tried to hook this up with irq_chip_set_affinity_parent. But it looks like the irq chip of the parent domain (i.e., the GIC) is pointing to NULL, and therefore it would crash when dereferencing it to get the irq_set_affinity callback.

I thought I did everything required by figuring out and linking to the correct parent domain in the iproc_msi_init routine:

parent_node = of_parse_phandle(node, "interrupt-parent", 0);

if (!parent_node) {
        dev_err(pcie->dev, "unable to parse MSI interrupt parent\n");
        return -ENODEV;
}

parent_domain = irq_find_host(parent_node);

if (!parent_domain) {
        dev_err(pcie->dev, "unable to get MSI parent domain\n");
        return -ENODEV;
}

...
...

Quoted 8 lines

msi->inner_domain = irq_domain_add_hierarchy(parent_domain, 0,

                                               msi->nirqs, NULL,
                                               &msi_domain_ops,
                                               msi);

I haven't spent too much time investigating, and am hoping to eventually enable affinity support with an incremental patch in the future when I have more time to investigate.

It fails because you're not implementing a fully stacked system, but only a partial one (see below).

Quoted 37 lines
Quoted 28 lines
Quoted 28 lines
drivers/pci/host/pcie-iproc-msi.c new file +28 -0
+}
+
+static void iproc_msi_irq_compose_msi_msg(struct irq_data *data,
+					  struct msi_msg *msg)
+{
+	struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
+	phys_addr_t addr;
+
+	addr = virt_to_phys(msi->msi_base) | (data->hwirq * 4);
+	msg->address_lo = lower_32_bits(addr);
+	msg->address_hi = upper_32_bits(addr);
+	msg->data = data->hwirq;
+}
+
+static struct irq_chip iproc_msi_bottom_irq_chip = {
+	.name = "MSI",
+	.irq_set_affinity = iproc_msi_irq_set_affinity,
+	.irq_compose_msi_msg = iproc_msi_irq_compose_msi_msg,
+};
+
+static int iproc_msi_irq_domain_alloc(struct irq_domain *domain,
+				      unsigned int virq, unsigned int nr_irqs,
+				      void *args)
+{
+	struct iproc_msi *msi = domain->host_data;
+	int i, msi_irq;
+
+	mutex_lock(&msi->bitmap_lock);
Quoted 8 lines

drivers/pci/host/pcie-iproc-msi.c line 176

Quoted 3 lines
drivers/pci/host/pcie-iproc-msi.c new file +3 -0
+
+	for (i = 0; i < nr_irqs; i++) {
+		msi_irq = find_first_zero_bit(msi->used, msi->nirqs);

This is slightly puzzling. Do you really have at most 6 MSIs? Usually, we end up with a larger number of MSIs (32 or 64) multiplexed on top of a small number of wired interrupts. Here, you seem to have a 1-1 mapping. Is that really the case?

Quoted 6 lines

Yes, based on the poorly written iProc PCIe arch doc, :), we seem to have 1-1 mapping between each wired interrupt and MSI, with each MSI handled by an event queue, that consists of 64x word entries allocated from host memory (DDR). The MSI data is stored in the low 16-bit of each entry, whereas the upper 16-bit of each entry is reserved for the iProc PCIe controller for its own use.

Quoted 8 lines

Based on your description, I have a completely different interpretation of how your HW works:

You have 4 (or 6) doorbells (the location where your PCI device writes its MSI), and whatever the device writes ends up in the event queue. I'm pretty sure the HW doesn't interpret what the device writes at all. The GIC irqs are just a way to indicate that there is something in one of the queues.

Yes, see my replies on another email, and your interpretation here is absolutely correct.

Quoted 6 lines

This means that you wouldn't be limited to 4/6 MSIs, but that you could actually have a lot more (apparently 16 bits worth of MSIs), and you could use the doorbell address to change your affinity (one GIC interrupt per CPU, assuming you don't have more than 4 or 6).

Yes, you are right. It looks like the number of MSI vectors to be supported by each event queue can be up to 64.

Given that the max number of CPUs on any SoC that uses the iProc event queue is 4 (and I'm glad that an upcoming 8-core processor can use GICv3-its instead), I can evenly distribute 4 interrupts to each of the CPUs.

Quoted 10 lines
Quoted 9 lines
Quoted 5 lines

If so (and assuming the wired interrupts are always contiguous), you shouldn't represent this as a chained interrupt (a multiplexer), but as a stacked irqchip, similar to what GICv2m does.

Okay, I think I might be missing something here, but I thought I currently have a stacked irqdomain (chip), i.e., GIC -> inner_domain -> MSI domain?

Quoted 7 lines

At the moment, you have one stacked domain (MSI -> iProc) that is used for a chained irqchip that feeds into the GIC.

What you could do is turning it into a stacked domain (MSI -> iProc -> GIC), using the fact that you have a 1:1 mapping between your MSIs and the GIC interrupts. But I'm now questionning that fact.

Indeed, should be 64 MSI vectors per GIC interrupt instead of 1:1.

Quoted 151 lines
Quoted 3 lines

And does this imply I should expect 'nr_irqs' in this routine to be always zero and therefore I can get rid of the for loop here (same in the domain free routine)?

It should never be zero. It is likely to be always 1, as it is the number of contiguous MSIs that have to be allocated in one go, and is exclusively used for multi-MSI (which you don't claim to support).

Quoted 139 lines
Quoted 63 lines
Quoted 63 lines
drivers/pci/host/pcie-iproc-msi.c new file +63 -0
+		if (msi_irq < msi->nirqs) {
+			set_bit(msi_irq, msi->used);
+		} else {
+			mutex_unlock(&msi->bitmap_lock);
+			return -ENOSPC;
+		}
+
+		irq_domain_set_info(domain, virq + i, msi_irq,
+				    &iproc_msi_bottom_irq_chip,
+				    domain->host_data, handle_simple_irq,
+				    NULL, NULL);
+	}
+
+	mutex_unlock(&msi->bitmap_lock);
+	return 0;
+}
+
+static void iproc_msi_irq_domain_free(struct irq_domain *domain,
+				      unsigned int virq, unsigned int nr_irqs)
+{
+	struct irq_data *data = irq_domain_get_irq_data(domain, virq);
+	struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
+	unsigned int i;
+
+	mutex_lock(&msi->bitmap_lock);
+
+	for (i = 0; i < nr_irqs; i++) {
+		struct irq_data *data = irq_domain_get_irq_data(domain,
+								virq + i);
+		if (!test_bit(data->hwirq, msi->used)) {
+			dev_warn(msi->pcie->dev, "freeing unused MSI %lu\n",
+				 data->hwirq);
+		} else
+			clear_bit(data->hwirq, msi->used);
+	}
+
+	mutex_unlock(&msi->bitmap_lock);
+	irq_domain_free_irqs_parent(domain, virq, nr_irqs);
+}
+
+static const struct irq_domain_ops msi_domain_ops = {
+	.alloc = iproc_msi_irq_domain_alloc,
+	.free = iproc_msi_irq_domain_free,
+};
+
+static void iproc_msi_enable(struct iproc_msi *msi)
+{
+	struct iproc_pcie *pcie = msi->pcie;
+	int i, eq;
+	u32 val;
+
+	/* program memory region for each event queue */
+	for (i = 0; i < msi->n_eq_region; i++) {
+		phys_addr_t addr =
+			virt_to_phys(msi->eq_base + (i * EQ_MEM_REGION_SIZE));
+
+		iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE, i,
+				    lower_32_bits(addr));
+		iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE_UPPER, i,
+				    upper_32_bits(addr));
+	}
+
+	/* program memory region for MSI posted writes */
Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 243

Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+	for (i = 0; i < msi->n_msi_msg_region; i++) {
+		phys_addr_t addr =
+			virt_to_phys(msi->msi_base +
+				     (i * MSI_MSG_MEM_REGION_SIZE));

You seem to be a victim of checkpatch. Please don't split statements like this, it just make it harder to read. My terminal can wrap lines very conveniently, and I don't care about the 80 character limit...

Okay will fix.

Quoted 54 lines
Quoted 54 lines
drivers/pci/host/pcie-iproc-msi.c new file +54 -0
+
+		iproc_msi_write_reg(msi, IPROC_MSI_PAGE, i,
+				    lower_32_bits(addr));
+		iproc_msi_write_reg(msi, IPROC_MSI_PAGE_UPPER, i,
+				    upper_32_bits(addr));
+	}
+
+	for (eq = 0; eq < msi->nirqs; eq++) {
+		/* enable MSI event queue */
+		val = IPROC_MSI_INTR_EN | IPROC_MSI_INT_N_EVENT |
+			IPROC_MSI_EQ_EN;
+		iproc_msi_write_reg(msi, IPROC_MSI_CTRL, eq, val);
+
+		/*
+		 * Some legacy platforms require the MSI interrupt enable
+		 * register to be set explicitly
+		 */
+		if (msi->has_inten_reg) {
+			val = readl(pcie->base + IPROC_MSI_INTS_EN_OFFSET);
+			val |= BIT(eq);
+			writel(val, pcie->base + IPROC_MSI_INTS_EN_OFFSET);
+		}
+	}
+}
+
+static void iproc_msi_handler(struct irq_desc *desc)
+{
+	unsigned int irq = irq_desc_get_irq(desc);
+	struct irq_chip *irq_chip = irq_desc_get_chip(desc);
+	struct iproc_msi *msi;
+	struct iproc_pcie *pcie;
+	u32 eq, head, tail, num_events;
+	int virq;
+
+	chained_irq_enter(irq_chip, desc);
+
+	msi = irq_get_handler_data(irq);
+	pcie = msi->pcie;
+
+	eq = irq - msi->irqs[0];
+	virq = irq_find_mapping(msi->inner_domain, eq);
+	head = iproc_msi_read_reg(msi, IPROC_MSI_EQ_HEAD, eq) &
+		IPROC_MSI_EQ_MASK;
+	do {
+		tail = iproc_msi_read_reg(msi, IPROC_MSI_EQ_TAIL, eq) &
+			IPROC_MSI_EQ_MASK;
+
+		num_events = (tail < head) ?
+			(IPROC_MSI_EQ_LEN - (head - tail)) : (tail - head);
+		if (!num_events)
+			break;
+
+		generic_handle_irq(virq);
+
Quoted 9 lines

drivers/pci/host/pcie-iproc-msi.c line 301

Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+		head++;
+		head %= IPROC_MSI_EQ_LEN;
+		iproc_msi_write_reg(msi, IPROC_MSI_EQ_HEAD, eq, head);
+	} while (true);

That's unusual. You seem to get only one interrupt for a bunch of MSIs, all representing the same IRQ? That feels very weird, as you can usually collapse edge interrupts.

Quoted 3 lines

I think we get one GIC interrupt per MSI line (1:1 mapping), but then the MSI data message can be more than one, stored in the event queue reserved for that MSI/interrupt line.

Quoted 6 lines

But can you have different messages? Buffering the same message N times is pretty useless (you can coalesce MSIs), but I'd completely understand the design if you could store N different messages. If that's the case, then the HW design would actually be a lot saner (whoever thought that 4 or 6 MSIs would be enough needs a PCIe crash course...).

This all comes from the confusion that we thought we have 1 MSI vector per GIC line. Now this starts to make much more sense after you pointed it out and discussions with our ASIC engineers. Each MSI message stored in the event queue can indicate a different MSI vector.

Quoted 8 lines
Quoted 3 lines

When you mentioned chained IRQ above, do you really mean the logic here? In fact, I don't think I really need to use the chained irq APIs here, as the MSI and GIC interrupt line has a 1-to-1 mapping.

If you definitely have a 1:1 mapping, and that you cannot store arbitrary messages in memory, then yes, you can switch to a fully stacked configuration.

I will now chain all MSI vectors on the same GIC interrupt.

Quoted 7 lines
Quoted 6 lines
Quoted 4 lines

drivers/pci/host/pcie-iproc-msi.c line 305

Quoted 4 lines
drivers/pci/host/pcie-iproc-msi.c new file +4 -0
+
+	chained_irq_exit(irq_chip, desc);
+}
+

Can probably get rid of the chained_irq_enter and exit?

Quoted 7 lines

You could get rid of a lot more than that, but that depends on the above discussion.

Thanks,

	M.

Thanks a lot, Marc!

Ray

author maintainer
#19 lore raw

PATCH 5/5 ARM: dts: Enable MSI support for Broadcom Cygnus

In reply to Ray Jui

Enable MSI support for Broadcom Cygnus platforms

---
 arch/arm/boot/dts/bcm-cygnus.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
arch/arm/boot/dts/bcm-cygnus.dtsi +26 -0
index 2778533..bae1ac2 100644
@@ -162,6 +162,19 @@
 				  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
 
 			status = "disabled";
+
+			msi-parent = <&msi0>;
+			msi0: msi@18012000 {
+				compatible = "brcm,iproc-msi";
+				msi-controller;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
+					     <GIC_SPI 97 IRQ_TYPE_NONE>,
+					     <GIC_SPI 98 IRQ_TYPE_NONE>,
+					     <GIC_SPI 99 IRQ_TYPE_NONE>;
+				brcm,num-eq-region = <1>;
+				brcm,num-msi-msg-region = <1>;
+			};
 		};
 
 		pcie1: pcie@18013000 {
@@ -183,6 +196,19 @@
 				  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
 
 			status = "disabled";
+
+			msi-parent = <&msi1>;
+			msi1: msi@18013000 {
+				compatible = "brcm,iproc-msi";
+				msi-controller;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_NONE>,
+					     <GIC_SPI 103 IRQ_TYPE_NONE>,
+					     <GIC_SPI 104 IRQ_TYPE_NONE>,
+					     <GIC_SPI 105 IRQ_TYPE_NONE>;
+				brcm,num-eq-region = <1>;
+				brcm,num-msi-msg-region = <1>;
+			};
 		};
 
 		uart0: serial@18020000 {
Signature · 1 line
1.9.1