Skip to contentSkip to conversation

test: fix crash in pmd_perf_test

PATCH Applied David Hunt 2 participants 2 messages Nov 23, 2015 – Dec 7, 2015

lore
Share & tools
lore

David Hunt

author
#0 lore raw

PATCH 1/1 test: fix crash in pmd_perf_test

Fix crash in pmd_perf_test autotest (div by 0) when no packets received Also fixes the fact that the test passes even if exec_burst fails

To repeat the issue:
The system must be incorrectly set up so that all packets will be lost, i.e. no loopback cable, etc. This is an edge case, but still the test should not crash or pass when failing.
run the test app
RTE>> set_rxtx_sc poll_before_xmit
RTE>> pmd_perf_autotest
--snip--

Quoted 4 lines

Generate 4096 packets @socket 1 start to receive total expect 4096 4096 packets lost, IDLE 10000 times Floating point exception (core dumped)

---
 app/test/test_pmd_perf.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
app/test/test_pmd_perf.c +9 -3
index 8f55640..25b4d09 100644
@@ -626,7 +626,10 @@ timeout:
 
 	rte_free(pkts_burst);
 
-	return diff_tsc / total;
+	if (total > 0)
+		return diff_tsc / total;
+	else
+		return -1;
 }
 
 static int
@@ -673,8 +676,10 @@ exec_burst(uint32_t flags, int lcore)
 
 	/* wait for polling finished */
 	diff_tsc = rte_eal_wait_lcore(lcore);
-	if (diff_tsc < 0)
+	if (diff_tsc < 0) {
+		printf("exec_burst: Failed to measure cycles per packet\n");
 		return -1;
+	}
 
 	printf("Result: %d cycles per packet\n", diff_tsc);
 
@@ -811,7 +816,8 @@ test_pmd_perf(void)
 			return -1;
 	} else if (sc_flag == SC_BURST_POLL_FIRST ||
 		   sc_flag == SC_BURST_XMIT_FIRST)
-		exec_burst(sc_flag, slave_id);
+		if (exec_burst(sc_flag, slave_id) < 0)
+			return -1;
 
 	/* port tear down */
 	for (portid = 0; portid < nb_ports; portid++) {
Signature · 1 line
2.1.0
#1 lore raw

2015-11-23 11:45, David Hunt:

Quoted 11 lines

Fix crash in pmd_perf_test autotest (div by 0) when no packets received Also fixes the fact that the test passes even if exec_burst fails

To repeat the issue:
The system must be incorrectly set up so that all packets will be lost, i.e. no loopback cable, etc. This is an edge case, but still the test should not crash or pass when failing.
run the test app
RTE>> set_rxtx_sc poll_before_xmit
RTE>> pmd_perf_autotest
--snip--

Quoted 6 lines
Quoted 4 lines

Generate 4096 packets @socket 1 start to receive total expect 4096 4096 packets lost, IDLE 10000 times Floating point exception (core dumped)

Applied, thanks