Skip to contentSkip to conversation

drm/i915: fix the SDE irq dmesg warnings properly

PATCH In review Jani Nikula 4 participants 9 messages Nov 25, 2015 – Jan 7, 2016

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 drm/i915: fix the SDE irq dmesg warnings properly

We had the "The master control interrupt lied (SDE)!" check and error message in place for a long time without any problems, until

commit aaf5ec2e51ab1d9c5e962b4728a1107ed3ff7a3e

Author: Sonika Jindal <[email protected]>
Date:   Wed Jul 8 17:07:47 2015 +0530

drm/i915: Handle HPD when it has actually occurred

caused the errors to start happening. This was bisected and reported, but the error message was silenced in

commit 97e5ed1111dcc5300a0f59a55248cd243937a8ab

Author: Daniel Vetter <[email protected]>
Date:   Fri Oct 23 10:56:12 2015 +0200

drm/i915: shut up gen8+ SDE irq dmesg noise

shooting the messenger while the debugging for why Sonika's commit triggered the errors was still in progress.

It looks like we need to read and acknowledge the PCH_PORT_HOTPLUG register even though the hotplug trigger indicates there isn't a hotplug irq to handle.

Cc: Ville Syrjälä <[email protected]>
Cc: Sonika Jindal <[email protected]>
Cc: Daniel Vetter <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92084

Fixes aaf5ec2e51ab ("drm/i915: Handle HPD when it has actually occurred")
---
 drivers/gpu/drm/i915/i915_irq.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_irq.c +12 -4
index c8ba94968aaf..982951d3153a 100644
@@ -1825,7 +1825,17 @@ static void ibx_hpd_irq_handler(struct drm_device *dev, u32 hotplug_trigger,
 	u32 dig_hotplug_reg, pin_mask = 0, long_mask = 0;
 
 	dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
+	if (!hotplug_trigger) {
+		u32 mask = PORTA_HOTPLUG_STATUS_MASK |
+			PORTD_HOTPLUG_STATUS_MASK |
+			PORTC_HOTPLUG_STATUS_MASK |
+			PORTB_HOTPLUG_STATUS_MASK;
+		dig_hotplug_reg &= ~mask;
+	}
+
 	I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
+	if (!hotplug_trigger)
+		return;
 
 	intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
 			   dig_hotplug_reg, hpd,
@@ -1840,8 +1850,7 @@ static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir)
 	int pipe;
 	u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK;
 
-	if (hotplug_trigger)
-		ibx_hpd_irq_handler(dev, hotplug_trigger, hpd_ibx);
+	ibx_hpd_irq_handler(dev, hotplug_trigger, hpd_ibx);
 
 	if (pch_iir & SDE_AUDIO_POWER_MASK) {
 		int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK) >>
@@ -1934,8 +1943,7 @@ static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir)
 	int pipe;
 	u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK_CPT;
 
-	if (hotplug_trigger)
-		ibx_hpd_irq_handler(dev, hotplug_trigger, hpd_cpt);
+	ibx_hpd_irq_handler(dev, hotplug_trigger, hpd_cpt);
 
 	if (pch_iir & SDE_AUDIO_POWER_MASK_CPT) {
 		int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK_CPT) >>
Signature · 6 lines
2.1.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH 2/2 Revert "drm/i915: shut up gen8+ SDE irq dmesg noise"

This reverts

commit 97e5ed1111dcc5300a0f59a55248cd243937a8ab

Author: Daniel Vetter <[email protected]>
Date:   Fri Oct 23 10:56:12 2015 +0200

drm/i915: shut up gen8+ SDE irq dmesg noise

With the proper fix ("drm/i915: fix the SDE irq dmesg warnings properly") reliably in place, bring back the error message.

---
 drivers/gpu/drm/i915/i915_irq.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/i915_irq.c +3 -7
index 982951d3153a..b327b37ed3b1 100644
@@ -2359,13 +2359,9 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)
 				spt_irq_handler(dev, pch_iir);
 			else
 				cpt_irq_handler(dev, pch_iir);
-		} else {
-			/*
-			 * Like on previous PCH there seems to be something
-			 * fishy going on with forwarding PCH interrupts.
-			 */
-			DRM_DEBUG_DRIVER("The master control interrupt lied (SDE)!\n");
-		}
+		} else
+			DRM_ERROR("The master control interrupt lied (SDE)!\n");
+
 	}
 
 	I915_WRITE_FW(GEN8_MASTER_IRQ, GEN8_MASTER_IRQ_CONTROL);
Signature · 6 lines
2.1.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 1/2
#2 lore raw
In reply to Jani Nikula
Quoted 44 lines · Jani Nikula

We had the "The master control interrupt lied (SDE)!" check and error message in place for a long time without any problems, until

commit aaf5ec2e51ab1d9c5e962b4728a1107ed3ff7a3e

Author: Sonika Jindal <[email protected]>
Date:   Wed Jul 8 17:07:47 2015 +0530

drm/i915: Handle HPD when it has actually occurred

caused the errors to start happening. This was bisected and reported, but the error message was silenced in

commit 97e5ed1111dcc5300a0f59a55248cd243937a8ab

Author: Daniel Vetter <[email protected]>
Date:   Fri Oct 23 10:56:12 2015 +0200

drm/i915: shut up gen8+ SDE irq dmesg noise

shooting the messenger while the debugging for why Sonika's commit triggered the errors was still in progress.

It looks like we need to read and acknowledge the PCH_PORT_HOTPLUG register even though the hotplug trigger indicates there isn't a hotplug irq to handle.

Cc: Ville Syrjälä <[email protected]>
Cc: Sonika Jindal <[email protected]>
Cc: Daniel Vetter <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92084

Fixes aaf5ec2e51ab ("drm/i915: Handle HPD when it has actually occurred")
---
 drivers/gpu/drm/i915/i915_irq.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_irq.c +1 -0
index c8ba94968aaf..982951d3153a 100644
@@ -1825,7 +1825,17 @@ static void ibx_hpd_irq_handler(struct drm_device *dev, u32 hotplug_trigger,
 	u32 dig_hotplug_reg, pin_mask = 0, long_mask = 0;
 
 	dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
+	if (!hotplug_trigger) {

drivers/gpu/drm/i915/i915_irq.c static void ibx_hpd_irq_handler(struct drm_device *dev, u32 hotplug_trigger, · line 1838

Quoted 10 lines
drivers/gpu/drm/i915/i915_irq.c +9 -0
+		u32 mask = PORTA_HOTPLUG_STATUS_MASK |
+			PORTD_HOTPLUG_STATUS_MASK |
+			PORTC_HOTPLUG_STATUS_MASK |
+			PORTB_HOTPLUG_STATUS_MASK;
+		dig_hotplug_reg &= ~mask;
+	}
+
 	I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
+	if (!hotplug_trigger)
+		return;

I would add some kind of comment around these parts to explain that somehow the PCH doesn't seem to really ack the interrupt to the CPU unless we touch the hotplug register.

Otherwise (for both patches)

Also not sure if SKL might need something similar as well...

Quoted 25 lines
drivers/gpu/drm/i915/i915_irq.c +2 -4
 	intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
 			   dig_hotplug_reg, hpd,
@@ -1840,8 +1850,7 @@ static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir)
 	int pipe;
 	u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK;
 
-	if (hotplug_trigger)
-		ibx_hpd_irq_handler(dev, hotplug_trigger, hpd_ibx);
+	ibx_hpd_irq_handler(dev, hotplug_trigger, hpd_ibx);
 
 	if (pch_iir & SDE_AUDIO_POWER_MASK) {
 		int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK) >>
@@ -1934,8 +1943,7 @@ static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir)
 	int pipe;
 	u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK_CPT;
 
-	if (hotplug_trigger)
-		ibx_hpd_irq_handler(dev, hotplug_trigger, hpd_cpt);
+	ibx_hpd_irq_handler(dev, hotplug_trigger, hpd_cpt);
 
 	if (pch_iir & SDE_AUDIO_POWER_MASK_CPT) {
 		int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK_CPT) >>
Signature · 1 line
2.1.4
Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
author Applied
#3 lore raw
Quoted 60 lines · Ville Syrjälä
Quoted 44 lines · Jani Nikula

We had the "The master control interrupt lied (SDE)!" check and error message in place for a long time without any problems, until

commit aaf5ec2e51ab1d9c5e962b4728a1107ed3ff7a3e

Author: Sonika Jindal <[email protected]>
Date:   Wed Jul 8 17:07:47 2015 +0530

drm/i915: Handle HPD when it has actually occurred

caused the errors to start happening. This was bisected and reported, but the error message was silenced in

commit 97e5ed1111dcc5300a0f59a55248cd243937a8ab

Author: Daniel Vetter <[email protected]>
Date:   Fri Oct 23 10:56:12 2015 +0200

drm/i915: shut up gen8+ SDE irq dmesg noise

shooting the messenger while the debugging for why Sonika's commit triggered the errors was still in progress.

It looks like we need to read and acknowledge the PCH_PORT_HOTPLUG register even though the hotplug trigger indicates there isn't a hotplug irq to handle.

Cc: Ville Syrjälä <[email protected]>
Cc: Sonika Jindal <[email protected]>
Cc: Daniel Vetter <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92084

Fixes aaf5ec2e51ab ("drm/i915: Handle HPD when it has actually occurred")
---
 drivers/gpu/drm/i915/i915_irq.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_irq.c +1 -0
index c8ba94968aaf..982951d3153a 100644
@@ -1825,7 +1825,17 @@ static void ibx_hpd_irq_handler(struct drm_device *dev, u32 hotplug_trigger,
 	u32 dig_hotplug_reg, pin_mask = 0, long_mask = 0;
 
 	dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
+	if (!hotplug_trigger) {

drivers/gpu/drm/i915/i915_irq.c static void ibx_hpd_irq_handler(struct drm_device *dev, u32 hotplug_trigger, · line 1838

Quoted 10 lines
drivers/gpu/drm/i915/i915_irq.c +9 -0
+		u32 mask = PORTA_HOTPLUG_STATUS_MASK |
+			PORTD_HOTPLUG_STATUS_MASK |
+			PORTC_HOTPLUG_STATUS_MASK |
+			PORTB_HOTPLUG_STATUS_MASK;
+		dig_hotplug_reg &= ~mask;
+	}
+
 	I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
+	if (!hotplug_trigger)
+		return;

I would add some kind of comment around these parts to explain that somehow the PCH doesn't seem to really ack the interrupt to the CPU unless we touch the hotplug register.

Quoted 2 lines

Otherwise (for both patches)

Pushed to drm-intel-next-queued, with a comment added and the commit message amended slightly, thanks for the review.

BR,
Jani.

Quoted 28 lines

Also not sure if SKL might need something similar as well...

Quoted 25 lines
drivers/gpu/drm/i915/i915_irq.c +2 -4
 	intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
 			   dig_hotplug_reg, hpd,
@@ -1840,8 +1850,7 @@ static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir)
 	int pipe;
 	u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK;
 
-	if (hotplug_trigger)
-		ibx_hpd_irq_handler(dev, hotplug_trigger, hpd_ibx);
+	ibx_hpd_irq_handler(dev, hotplug_trigger, hpd_ibx);
 
 	if (pch_iir & SDE_AUDIO_POWER_MASK) {
 		int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK) >>
@@ -1934,8 +1943,7 @@ static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir)
 	int pipe;
 	u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK_CPT;
 
-	if (hotplug_trigger)
-		ibx_hpd_irq_handler(dev, hotplug_trigger, hpd_cpt);
+	ibx_hpd_irq_handler(dev, hotplug_trigger, hpd_cpt);
 
 	if (pch_iir & SDE_AUDIO_POWER_MASK_CPT) {
 		int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK_CPT) >>
Signature · 1 line
2.1.4
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw
In reply to Jani Nikula
Quoted 25 lines · Jani Nikula

We had the "The master control interrupt lied (SDE)!" check and error message in place for a long time without any problems, until

commit aaf5ec2e51ab1d9c5e962b4728a1107ed3ff7a3e

Author: Sonika Jindal <[email protected]>
Date:   Wed Jul 8 17:07:47 2015 +0530

drm/i915: Handle HPD when it has actually occurred

caused the errors to start happening. This was bisected and reported, but the error message was silenced in

commit 97e5ed1111dcc5300a0f59a55248cd243937a8ab

Author: Daniel Vetter <[email protected]>
Date:   Fri Oct 23 10:56:12 2015 +0200

drm/i915: shut up gen8+ SDE irq dmesg noise

shooting the messenger while the debugging for why Sonika's commit triggered the errors was still in progress.

It looks like we need to read and acknowledge the PCH_PORT_HOTPLUG register even though the hotplug trigger indicates there isn't a hotplug irq to handle.

Quoted 6 lines

Cc: Ville Syrjälä <[email protected]>
Cc: Sonika Jindal <[email protected]>
Cc: Daniel Vetter <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92084

Fixes aaf5ec2e51ab ("drm/i915: Handle HPD when it has actually occurred")

And to you I say:

[    4.249930] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.251037] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.251403] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.252141] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.252509] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.253247] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.253616] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.253985] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.254724] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.255460] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.256198] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.256567] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.257305] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.258043] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.258781] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.259519] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.259889] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.260626] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.261365] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.261734] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.262103] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.262163] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.263261] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.263999] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.264737] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.265106] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.266214] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!

i7-5557U nuc currently connected to HDMI.
-Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw
Quoted 63 lines · Chris Wilson
Quoted 25 lines · Jani Nikula

We had the "The master control interrupt lied (SDE)!" check and error message in place for a long time without any problems, until

commit aaf5ec2e51ab1d9c5e962b4728a1107ed3ff7a3e

Author: Sonika Jindal <[email protected]>
Date:   Wed Jul 8 17:07:47 2015 +0530

drm/i915: Handle HPD when it has actually occurred

caused the errors to start happening. This was bisected and reported, but the error message was silenced in

commit 97e5ed1111dcc5300a0f59a55248cd243937a8ab

Author: Daniel Vetter <[email protected]>
Date:   Fri Oct 23 10:56:12 2015 +0200

drm/i915: shut up gen8+ SDE irq dmesg noise

shooting the messenger while the debugging for why Sonika's commit triggered the errors was still in progress.

It looks like we need to read and acknowledge the PCH_PORT_HOTPLUG register even though the hotplug trigger indicates there isn't a hotplug irq to handle.

Quoted 6 lines

Cc: Ville Syrjälä <[email protected]>
Cc: Sonika Jindal <[email protected]>
Cc: Daniel Vetter <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92084

Fixes aaf5ec2e51ab ("drm/i915: Handle HPD when it has actually occurred")

And to you I say:

[    4.249930] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.251037] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.251403] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.252141] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.252509] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.253247] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.253616] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.253985] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.254724] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.255460] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.256198] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.256567] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.257305] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.258043] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.258781] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.259519] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.259889] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.260626] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.261365] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.261734] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.262103] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.262163] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.263261] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.263999] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.264737] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.265106] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[    4.266214] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
Quoted 1 line

i7-5557U nuc currently connected to HDMI.

Sigh. Do those correcpond to AUX attempts by any chance? IIRC that was where Jani saw the problem on his BDW.

Oh and maybe you can try Jani's debug patch
https://bugs.freedesktop.org/show_bug.cgi?id=92084#c20
to show us what the hotplug register says during these fails?

Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw
Quoted 9 lines · Ville Syrjälä
Quoted 1 line · Chris Wilson

i7-5557U nuc currently connected to HDMI.

Sigh. Do those correcpond to AUX attempts by any chance? IIRC that was where Jani saw the problem on his BDW.

Oh and maybe you can try Jani's debug patch
https://bugs.freedesktop.org/show_bug.cgi?id=92084#c20
to show us what the hotplug register says during these fails?

Sure, just only happens when plugged in, so likely be a while before I allow it back into the warmth.
-Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#7 lore raw
Quoted 7 lines · Chris Wilson
Quoted 6 lines · Ville Syrjälä
Quoted 1 line · Chris Wilson

i7-5557U nuc currently connected to HDMI.

Sigh. Do those correcpond to AUX attempts by any chance? IIRC that was where Jani saw the problem on his BDW.

Quoted 6 lines
Quoted 3 lines

Oh and maybe you can try Jani's debug patch
https://bugs.freedesktop.org/show_bug.cgi?id=92084#c20
to show us what the hotplug register says during these fails?

Sure, just only happens when plugged in, so likely be a while before I allow it back into the warmth.

Has there been any further progress on this issue? I'm still seeing this with 4.3.3 and we're looking to rebase Fedora to 4.3.y or 4.4 soon. As far as I'm aware this remains unfixed upstream.

josh
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

#8 lore raw
Quoted 12 lines · Josh Boyer
Quoted 11 lines · Chris Wilson
Quoted 9 lines · Ville Syrjälä
Quoted 1 line · Chris Wilson

i7-5557U nuc currently connected to HDMI.

Sigh. Do those correcpond to AUX attempts by any chance? IIRC that was where Jani saw the problem on his BDW.

Oh and maybe you can try Jani's debug patch
https://bugs.freedesktop.org/show_bug.cgi?id=92084#c20
to show us what the hotplug register says during these fails?

Quoted 6 lines
Quoted 2 lines

Sure, just only happens when plugged in, so likely be a while before I allow it back into the warmth.

Has there been any further progress on this issue? I'm still seeing this with 4.3.3 and we're looking to rebase Fedora to 4.3.y or 4.4 soon. As far as I'm aware this remains unfixed upstream.

Back and forth,

http://patchwork.freedesktop.org/patch/msgid/[email protected]

BR,
Jani.

Quoted 2 lines

josh

Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx