Skip to contentSkip to conversation

scsi: rescan VPD attributes

PATCH Applied Hannes Reinecke 4 participants 7 messages Nov 9, 2015 – Nov 30, 2015 SCSI

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 scsi: rescan VPD attributes

The VPD page information might change, so we need to be able to update it. This patch implements a VPD page rescan whenever the 'rescan' sysfs attribute is triggered.

---
 drivers/scsi/scsi.c        | 20 +++++++++++++++++---
 drivers/scsi/scsi_scan.c   |  4 ++++
 drivers/scsi/scsi_sysfs.c  |  8 ++++++--
 drivers/scsi/ses.c         | 12 +++++++++---
 include/scsi/scsi_device.h |  5 +++--
 5 files changed, 39 insertions(+), 10 deletions(-)
drivers/scsi/scsi.c +17 -3
index 207d6a7..2e4ef56 100644
@@ -803,7 +803,7 @@ void scsi_attach_vpd(struct scsi_device *sdev)
 	int vpd_len = SCSI_VPD_PG_LEN;
 	int pg80_supported = 0;
 	int pg83_supported = 0;
-	unsigned char *vpd_buf;
+	unsigned char __rcu *vpd_buf, *orig_vpd_buf = NULL;
 
 	if (sdev->skip_vpd_pages)
 		return;
@@ -849,8 +849,16 @@ retry_pg80:
 			kfree(vpd_buf);
 			goto retry_pg80;
 		}
+		mutex_lock(&sdev->inquiry_mutex);
+		orig_vpd_buf = sdev->vpd_pg80;
 		sdev->vpd_pg80_len = result;
-		sdev->vpd_pg80 = vpd_buf;
+		rcu_assign_pointer(sdev->vpd_pg80, vpd_buf);
+		mutex_unlock(&sdev->inquiry_mutex);
+		synchronize_rcu();
+		if (orig_vpd_buf) {
+			kfree(orig_vpd_buf);
+			orig_vpd_buf = NULL;
+		}
 		vpd_len = SCSI_VPD_PG_LEN;
 	}
 
@@ -870,8 +878,14 @@ retry_pg83:
 			kfree(vpd_buf);
 			goto retry_pg83;
 		}
+		mutex_lock(&sdev->inquiry_mutex);
+		orig_vpd_buf = sdev->vpd_pg83;
 		sdev->vpd_pg83_len = result;
-		sdev->vpd_pg83 = vpd_buf;
+		rcu_assign_pointer(sdev->vpd_pg83, vpd_buf);
+		mutex_unlock(&sdev->inquiry_mutex);
+		synchronize_rcu();
+		if (orig_vpd_buf)
+			kfree(orig_vpd_buf);
 	}
 }
 
drivers/scsi/scsi_scan.c +4 -0
index 3b3dfef..7e0820f 100644
@@ -236,6 +236,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
 	INIT_LIST_HEAD(&sdev->starved_entry);
 	INIT_LIST_HEAD(&sdev->event_list);
 	spin_lock_init(&sdev->list_lock);
+	mutex_init(&sdev->inquiry_mutex);
 	INIT_WORK(&sdev->event_work, scsi_evt_thread);
 	INIT_WORK(&sdev->requeue_work, scsi_requeue_run_queue);
 
@@ -1517,6 +1518,9 @@ EXPORT_SYMBOL(scsi_add_device);
 void scsi_rescan_device(struct device *dev)
 {
 	device_lock(dev);
+
+	scsi_attach_vpd(to_scsi_device(dev));
+
 	if (dev->driver && try_module_get(dev->driver->owner)) {
 		struct scsi_driver *drv = to_scsi_driver(dev->driver);
 
drivers/scsi/scsi_sysfs.c +6 -2
index fdcf0ab..f021423 100644
@@ -758,11 +758,15 @@ show_vpd_##_page(struct file *filp, struct kobject *kobj,	\
 {									\
 	struct device *dev = container_of(kobj, struct device, kobj);	\
 	struct scsi_device *sdev = to_scsi_device(dev);			\
+	int ret;							\
 	if (!sdev->vpd_##_page)						\
 		return -EINVAL;						\
-	return memory_read_from_buffer(buf, count, &off,		\
-				       sdev->vpd_##_page,		\
+	rcu_read_lock();						\
+	ret = memory_read_from_buffer(buf, count, &off,			\
+				      rcu_dereference(sdev->vpd_##_page), \
 				       sdev->vpd_##_page##_len);	\
+	rcu_read_unlock();						\
+	return ret;						\
 }									\
 static struct bin_attribute dev_attr_vpd_##_page = {		\
 	.attr =	{.name = __stringify(vpd_##_page), .mode = S_IRUGO },	\
drivers/scsi/ses.c +9 -3
index dcb0d76..e234da7 100644
@@ -554,17 +554,22 @@ static void ses_match_to_enclosure(struct enclosure_device *edev,
 				   struct scsi_device *sdev)
 {
 	unsigned char *desc;
+	unsigned char __rcu *vpd_pg83;
 	struct efd efd = {
 		.addr = 0,
 	};
 
 	ses_enclosure_data_process(edev, to_scsi_device(edev->edev.parent), 0);
 
-	if (!sdev->vpd_pg83_len)
+	rcu_read_lock();
+	vpd_pg83 = rcu_dereference(sdev->vpd_pg83);
+	if (!vpd_pg83) {
+		rcu_read_unlock();
 		return;
+	}
 
-	desc = sdev->vpd_pg83 + 4;
-	while (desc < sdev->vpd_pg83 + sdev->vpd_pg83_len) {
+	desc = vpd_pg83 + 4;
+	while (desc < vpd_pg83 + sdev->vpd_pg83_len) {
 		enum scsi_protocol proto = desc[0] >> 4;
 		u8 code_set = desc[0] & 0x0f;
 		u8 piv = desc[1] & 0x80;
@@ -578,6 +583,7 @@ static void ses_match_to_enclosure(struct enclosure_device *edev,
 
 		desc += len + 4;
 	}
+	rcu_read_unlock();
 	if (efd.addr) {
 		efd.dev = &sdev->sdev_gendev;
 
include/scsi/scsi_device.h +3 -2
index fe89d7c..bde4077 100644
@@ -109,6 +109,7 @@ struct scsi_device {
 	char type;
 	char scsi_level;
 	char inq_periph_qual;	/* PQ from INQUIRY data */	
+	struct mutex inquiry_mutex;
 	unsigned char inquiry_len;	/* valid bytes in 'inquiry' */
 	unsigned char * inquiry;	/* INQUIRY response data */
 	const char * vendor;		/* [back_compat] point into 'inquiry' ... */
@@ -117,9 +118,9 @@ struct scsi_device {
 
 #define SCSI_VPD_PG_LEN                255
 	int vpd_pg83_len;
-	unsigned char *vpd_pg83;
+	unsigned char __rcu *vpd_pg83;
 	int vpd_pg80_len;
-	unsigned char *vpd_pg80;
+	unsigned char __rcu *vpd_pg80;
 	unsigned char current_tag;	/* current tag */
 	struct scsi_target      *sdev_target;   /* used only for single_lun */
 
Signature · 1 line
1.8.5.6
#1 lore raw
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Hannes" == Hannes Reinecke <[email protected]> writes:

Hannes> The VPD page information might change, so we need to be able to Hannes> update it. This patch implements a VPD page rescan whenever the Hannes> 'rescan' sysfs attribute is triggered.

I was looking into merging the ALUA series but this prerequisite patch is lacking reviews...

Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering
#2 lore raw
In reply to Hannes Reinecke

Hi Hannes,

I have one probably small nitpick about the patch. I'm not sure how likely what I've put below is likely to happen in real life though.

Is there any chance at all that sdev->vpd_pg83_len could change when updated? If there's any chance of that I'd have expected that both the length of and the pointer to the vpd data would need to be protected not just the pointer so someone would have a consistent picture of the vpd and its length. Without that there is a race where someone could be using a new length with the old vpd data. That leaves the potential for a length that exceeds the vpd size if the new data is larger than the old data - I don't know how likely it is but wanted to at least bring it up as something to consider.

I'm not so concerned about sdev->vpd_pg80_len changing since it should have 1 of 2 fixed sizes and it seems unlikely that once read the first time a device would increase it in size (but for consistency in the code if you make a change you might want to treat them the same way).

Thanks
Shane

#3 lore raw
Quoted 7 lines · Shane M

Hi Hannes,

I have one probably small nitpick about the patch. I'm not sure how likely what I've put below is likely to happen in real life though.

Is there any chance at all that sdev->vpd_pg83_len could change when updated? If there's any chance of that I'd have expected that both the

length of and the pointer to the vpd data

Quoted 1 line

would need to be protected not just the pointer so someone would

have a consistent picture of the vpd

Quoted 1 line

and its length. Without that there is a race where someone could

be using a new length with the old vpd

Quoted 1 line

data. That leaves the potential for a length that exceeds the vpd

size if the new data is larger than

Quoted 1 line

the old data - I don't know how likely it is but wanted to at

least bring it up as something to consider.

Quoted 1 line

Accesses to vpd_pgXX are rcu-protected, so we're ensured that we always see a _valid_ copy. And we know that integer updates are atomic, so we will always see a valid number in vpd_pgXX_len. Both, vpd_pgXX and vpd_pgXX_len, are updated at the same place, and under the same locks/mutexes. And as we're calling 'synchronize_rcu()' after updating vpd_pgXX, which needs to synchronize against all CPUs, I would think that this would take care of updating vpd_pgXX_len, too.

But you are right, we can get rid of vpd_pgXX_len and calculate it from the data.
However, I'd like to do this with another patch after the ALUA changes are in.

Cheers,

Hannes

Signature · 9 lines
Dr. Hannes Reinecke		               zSeries & Storage
[email protected]			               +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Reviewed-by on v1 1/1
#4 lore raw
In reply to Hannes Reinecke
Quoted 175 lines · Hannes Reinecke

The VPD page information might change, so we need to be able to update it. This patch implements a VPD page rescan whenever the 'rescan' sysfs attribute is triggered.

---
 drivers/scsi/scsi.c        | 20 +++++++++++++++++--- drivers/scsi/scsi_scan.c   |  4 ++++ drivers/scsi/scsi_sysfs.c  |  8 ++++++-- drivers/scsi/ses.c         | 12 +++++++++--- include/scsi/scsi_device.h |  5 +++--

 5 files changed, 39 insertions(+), 10 deletions(-)
drivers/scsi/scsi.c +1 -1
index 207d6a7..2e4ef56 100644
@@ -803,7 +803,7 @@ void scsi_attach_vpd(struct scsi_device *sdev)
  	int vpd_len = SCSI_VPD_PG_LEN;
  	int pg80_supported = 0;
  	int pg83_supported = 0;
-	unsigned char *vpd_buf;
+	unsigned char __rcu *vpd_buf, *orig_vpd_buf = NULL;


  if (sdev->skip_vpd_pages)
  return;

drivers/scsi/scsi.c +9 -1
@@ -849,8 +849,16 @@ retry_pg80:
  			kfree(vpd_buf);
  			goto retry_pg80;
  		}
+		mutex_lock(&sdev->inquiry_mutex);
+		orig_vpd_buf = sdev->vpd_pg80;
  		sdev->vpd_pg80_len = result;
-		sdev->vpd_pg80 = vpd_buf;
+		rcu_assign_pointer(sdev->vpd_pg80, vpd_buf);
+		mutex_unlock(&sdev->inquiry_mutex);
+		synchronize_rcu();
+		if (orig_vpd_buf) {
+			kfree(orig_vpd_buf);
+			orig_vpd_buf = NULL;
+		}
  		vpd_len = SCSI_VPD_PG_LEN;
  	}

drivers/scsi/scsi.c +7 -1
@@ -870,8 +878,14 @@ retry_pg83:
  			kfree(vpd_buf);
  			goto retry_pg83;
  		}
+		mutex_lock(&sdev->inquiry_mutex);
+		orig_vpd_buf = sdev->vpd_pg83;
  		sdev->vpd_pg83_len = result;
-		sdev->vpd_pg83 = vpd_buf;
+		rcu_assign_pointer(sdev->vpd_pg83, vpd_buf);
+		mutex_unlock(&sdev->inquiry_mutex);
+		synchronize_rcu();
+		if (orig_vpd_buf)
+			kfree(orig_vpd_buf);
  	}
  }

drivers/scsi/scsi_scan.c +1 -0
index 3b3dfef..7e0820f 100644
@@ -236,6 +236,7 @@ static struct scsi_device *scsi_alloc_sdev(struct
 scsi_target *starget,
  	INIT_LIST_HEAD(&sdev->starved_entry);
  	INIT_LIST_HEAD(&sdev->event_list);
  	spin_lock_init(&sdev->list_lock);
+	mutex_init(&sdev->inquiry_mutex);
  	INIT_WORK(&sdev->event_work, scsi_evt_thread);
  	INIT_WORK(&sdev->requeue_work, scsi_requeue_run_queue);

drivers/scsi/scsi_scan.c +3 -0
@@ -1517,6 +1518,9 @@ EXPORT_SYMBOL(scsi_add_device);
  void scsi_rescan_device(struct device *dev)
  {
  	device_lock(dev);
+
+	scsi_attach_vpd(to_scsi_device(dev));
+
  	if (dev->driver && try_module_get(dev->driver->owner)) {
  		struct scsi_driver *drv = to_scsi_driver(dev->driver);

drivers/scsi/scsi_sysfs.c +3 -2
index fdcf0ab..f021423 100644
@@ -758,11 +758,15 @@ show_vpd_##_page(struct file *filp, struct kobject
 *kobj,	\
  {									\
  	struct device *dev = container_of(kobj, struct device, kobj);	
 \
  	struct scsi_device *sdev = to_scsi_device(dev);			
 \
+	int ret;							\
  	if (!sdev->vpd_##_page)						
 \
  		return -EINVAL;						
 \
-	return memory_read_from_buffer(buf, count, &off,		\
-				       sdev->vpd_##_page,		\
+	rcu_read_lock();						\
+	ret = memory_read_from_buffer(buf, count, &off,			

\

drivers/scsi/scsi_sysfs.c +1 -0
+				      rcu_dereference(sdev->vpd_##_page), \

         sdev->vpd_##_page##_len); \

drivers/scsi/scsi_sysfs.c +2 -0
+	rcu_read_unlock();						\
+	return ret;						\

 } \
 static struct bin_attribute dev_attr_vpd_##_page = { \
  .attr = {.name = __stringify(vpd_##_page), .mode = S_IRUGO },

	\
drivers/scsi/ses.c +1 -0
index dcb0d76..e234da7 100644
@@ -554,17 +554,22 @@ static void ses_match_to_enclosure(struct
 enclosure_device *edev,
  				   struct scsi_device *sdev)
  {
  	unsigned char *desc;
+	unsigned char __rcu *vpd_pg83;
  	struct efd efd = {
  		.addr = 0,
  	};


  ses_enclosure_data_process(edev, to_scsi_device(edev->edev.parent), 0);

drivers/scsi/ses.c +4 -1
-	if (!sdev->vpd_pg83_len)
+	rcu_read_lock();
+	vpd_pg83 = rcu_dereference(sdev->vpd_pg83);
+	if (!vpd_pg83) {
+		rcu_read_unlock();

  return;

drivers/scsi/ses.c +1 -0
+	}

drivers/scsi/ses.c +2 -2
-	desc = sdev->vpd_pg83 + 4;
-	while (desc < sdev->vpd_pg83 + sdev->vpd_pg83_len) {
+	desc = vpd_pg83 + 4;
+	while (desc < vpd_pg83 + sdev->vpd_pg83_len) {

  enum scsi_protocol proto = desc[0] >> 4; u8 code_set = desc[0] & 0x0f; u8 piv = desc[1] & 0x80;

drivers/scsi/ses.c +0 -0
@@ -578,6 +583,7 @@ static void ses_match_to_enclosure(struct
 enclosure_device *edev,


  desc += len + 4;
  }

drivers/scsi/ses.c +1 -0
+	rcu_read_unlock();

  if (efd.addr) {
  efd.dev = &sdev->sdev_gendev;

include/scsi/scsi_device.h +0 -0
index fe89d7c..bde4077 100644
@@ -109,6 +109,7 @@ struct scsi_device {
  	char type;
  	char scsi_level;

  char inq_periph_qual; /* PQ from INQUIRY data */

include/scsi/scsi_device.h +1 -0
+	struct mutex inquiry_mutex;

  unsigned char inquiry_len; /* valid bytes in 'inquiry' */
  unsigned char * inquiry; /* INQUIRY response data */
  const char * vendor; /* [back_compat] point into
'inquiry' ... */

include/scsi/scsi_device.h +0 -0
@@ -117,9 +118,9 @@ struct scsi_device {


 #define SCSI_VPD_PG_LEN                255
  int vpd_pg83_len;

include/scsi/scsi_device.h +1 -1
-	unsigned char *vpd_pg83;
+	unsigned char __rcu *vpd_pg83;

  int vpd_pg80_len;

include/scsi/scsi_device.h +1 -1
-	unsigned char *vpd_pg80;
+	unsigned char __rcu *vpd_pg80;
Quoted 4 lines

  unsigned char current_tag; /* current tag */
  struct scsi_target      *sdev_target;   /* used only for single_lun */

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#6 lore raw
In reply to Hannes Reinecke
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Hannes" == Hannes Reinecke <[email protected]> writes:

Hannes> The VPD page information might change, so we need to be able to Hannes> update it. This patch implements a VPD page rescan whenever the Hannes> 'rescan' sysfs attribute is triggered.

Applied to 4.5/scsi-queue.

Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering