Skip to contentSkip to conversation

Bluetooth: Add support of Toshiba Broadcom based devices

PATCH In review Dmitry Tunin 2 participants 2 messages Dec 5, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Bluetooth: Add support of Toshiba Broadcom based devices

    T: Bus=03 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
    D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=0930 ProdID=0225 Rev=01.12
    S: Manufacturer=Broadcom Corp
    S: Product=BCM43142A0
    S: SerialNumber=4CBB58034671
    C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
    I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
    I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
    I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
    I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
---
 drivers/bluetooth/btusb.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/bluetooth/btusb.c +4 -0
index 8063534..25beb3a 100644
@@ -153,6 +153,10 @@ static const struct usb_device_id btusb_table[] = {
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01),
 	  .driver_info = BTUSB_BCM_PATCHRAM },
 
+	/* Toshiba Corp - Broadcom based */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x0930, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
+
 	/* Intel Bluetooth USB Bootloader (RAM module) */
 	{ USB_DEVICE(0x8087, 0x0a5a),
 	  .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },
Signature · 1 line
1.9.1
maintainer
#1 lore raw

Hi Dmitry,

Quoted 14 lines
   T: Bus=03 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
   D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
   P: Vendor=0930 ProdID=0225 Rev=01.12
   S: Manufacturer=Broadcom Corp
   S: Product=BCM43142A0
   S: SerialNumber=4CBB58034671
   C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
   I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
   I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
   I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
   I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
Quoted 5 lines

---
drivers/bluetooth/btusb.c | 4 ++++

1 file changed, 4 insertions(+)

patch has been applied to bluetooth-next tree.

Regards

Marcel