iio: chemical: add AMS iAQ-core support
Subsystems (3)
v2 cover iio: chemical: add AMS iAQ-core support
Changes from v1:
* changed channel masks to IIO_CHAN_INFO_PROCESSED
* return IIO_VAL_INT_PLUS_MICRO/NANO for VOC channels since they don't require any special scaling values
* change i2c_msg array to single element
* make sure data->buffer is locked in *_read_raw
Matt Ranostay (1):
iio: chemical: add AMS iAQ-core support
.../devicetree/bindings/i2c/trivial-devices.txt | 1 + drivers/iio/chemical/Kconfig | 8 + drivers/iio/chemical/Makefile | 1 + drivers/iio/chemical/ams-iaq-core.c | 200 +++++++++++++++++++++ 4 files changed, 210 insertions(+) create mode 100644 drivers/iio/chemical/ams-iaq-core.c
Signature · 1 line
1.9.1
PATCH v2 1/1 iio: chemical: add AMS iAQ-core support
Add support for AMS iAQ-core continuous and pulsed VOC sensors.
Signed-off-by Matt Ranostay <[email protected]>
--- .../devicetree/bindings/i2c/trivial-devices.txt | 1 + drivers/iio/chemical/Kconfig | 8 + drivers/iio/chemical/Makefile | 1 + drivers/iio/chemical/ams-iaq-core.c | 200 +++++++++++++++++++++ 4 files changed, 210 insertions(+) create mode 100644 drivers/iio/chemical/ams-iaq-core.c
Documentation/devicetree/bindings/i2c/trivial-devices.txt +1 -0
@@ -20,6 +20,7 @@ adi,adt7476 +/-1C TDM Extended Temp Range I.C adi,adt7490 +/-1C TDM Extended Temp Range I.C adi,adxl345 Three-Axis Digital Accelerometer adi,adxl346 Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too) +ams,iaq-core AMS iAQ-Core VOC Sensor at,24c08 i2c serial eeprom (24cxx) atmel,24c00 i2c serial eeprom (24cxx) atmel,24c01 i2c serial eeprom (24cxx)
drivers/iio/chemical/Kconfig +8 -0
@@ -4,6 +4,14 @@ menu "Chemical Sensors" +config IAQCORE + tristate "AMS iAQ-Core VOC sensors" + depends on I2C + help + Say Y here to build I2C interface support for the AMS + iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds) + sensors + config VZ89X tristate "SGX Sensortech MiCS VZ89X VOC sensor" depends on I2C
drivers/iio/chemical/Makefile +1 -0
@@ -3,4 +3,5 @@ # # When adding new entries keep the list in alphabetical order +obj-$(CONFIG_IAQCORE) += ams-iaq-core.o obj-$(CONFIG_VZ89X) += vz89x.o
drivers/iio/chemical/ams-iaq-core.c new file +200 -0
200 lines not on this page · raw message
Signature · 1 line
1.9.1