Skip to contentSkip to conversation

Patch "USB: ti_usb_3410_5052: Add Honeywell HGI80 ID" has been added to the 4.2-stable tree

PATCH [email protected] 1 participant 1 message Dec 7, 2015

Subsystems (3)
Stable branch USB USB serial
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

    USB: ti_usb_3410_5052: Add Honeywell HGI80 ID

to the 4.2-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:

     usb-ti_usb_3410_5052-add-honeywell-hgi80-id.patch

and it can be found in the queue-4.2 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 1bcb49e663f88bccee35b8688e6a3da2bea31fd4 Mon Sep 17 00:00:00 2001

From: David Woodhouse <[email protected]>
Date: Sat, 14 Nov 2015 16:49:30 +0000
Subject: USB: ti_usb_3410_5052: Add Honeywell HGI80 ID

From: David Woodhouse <[email protected]>

commit 1bcb49e663f88bccee35b8688e6a3da2bea31fd4 upstream.

The Honeywell HGI80 is a wireless interface to the evohome connected thermostat. It uses a TI 3410 USB-serial port.

Signed-off-by David Woodhouse <[email protected]>
Signed-off-by Johan Hovold <[email protected]>
Signed-off-by Greg Kroah-Hartman <[email protected]>
---
 drivers/usb/serial/ti_usb_3410_5052.c |    2 ++
 drivers/usb/serial/ti_usb_3410_5052.h |    4 ++++
 2 files changed, 6 insertions(+)
drivers/usb/serial/ti_usb_3410_5052.c +2 -0
@@ -159,6 +159,7 @@ static const struct usb_device_id ti_id_
 	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STEREO_PLUG_ID) },
 	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
+	{ USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
 	{ }	/* terminator */
 };
 

@@ -191,6 +192,7 @@ static const struct usb_device_id ti_id_
 	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
 	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
+	{ USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
 	{ }	/* terminator */
 };
drivers/usb/serial/ti_usb_3410_5052.h +4 -0
@@ -56,6 +56,10 @@
 #define ABBOTT_PRODUCT_ID		ABBOTT_STEREO_PLUG_ID
 #define ABBOTT_STRIP_PORT_ID		0x3420
 
+/* Honeywell vendor and product IDs */
+#define HONEYWELL_VENDOR_ID		0x10ac
+#define HONEYWELL_HGI80_PRODUCT_ID	0x0102  /* Honeywell HGI80 */
+
 /* Commands */
 #define TI_GET_VERSION			0x01
 #define TI_GET_PORT_STATUS		0x02

Patches currently in stable-queue which might be from [email protected] are

queue-4.2/usb-ti_usb_3410_5052-add-honeywell-hgi80-id.patch