cross-canadian.bbclass: Add BASECANADIANEXTRAOS to specify main extraos
PATCH 1/1 cross-canadian.bbclass: Add BASECANADIANEXTRAOS to specify main extraos
By default the system will expand the extra os entries for uclibc and musl even if they are not enabled in the build. There was no way to prevent this behavior while still getting the expansion for things like x32 or spe.
The change adds a new setting which a distribution creator can override easily, setting the base set of canadianextraos components. The other expansions are then based on this setting.
--- meta/classes/cross-canadian.bbclass | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)
meta/classes/cross-canadian.bbclass +17 -5
@@ -15,7 +15,8 @@ STAGING_BINDIR_TOOLCHAIN = "${STAGING_DIR_NATIVE}${bindir_native}/${SDK_ARCH}${S # Update BASE_PACKAGE_ARCH and PACKAGE_ARCHS # PACKAGE_ARCH = "${SDK_ARCH}-${SDKPKGSUFFIX}" -CANADIANEXTRAOS = "linux-uclibc linux-musl" +BASECANADIANEXTRAOS ?= "linux-uclibc linux-musl" +CANADIANEXTRAOS = "${BASECANADIANEXTRAOS}" CANADIANEXTRAVENDOR = "" MODIFYTOS ??= "1" python () {
@@ -34,8 +35,13 @@ python () { tos = d.getVar("TARGET_OS", True) whitelist = [] + extralibcs = [""] + if "uclibc" in d.getVar("BASECANADIANEXTRAOS", True): + extralibcs.append("uclibc") + if "musl" in d.getVar("BASECANADIANEXTRAOS", True): + extralibcs.append("musl") for variant in ["", "spe", "x32", "eabi", "n32"]: - for libc in ["", "uclibc", "musl"]: + for libc in extralibcs: entry = "linux" if variant and libc: entry = entry + "-" + libc + variant
@@ -59,14 +65,20 @@ python () { if tarch == "x86_64": d.setVar("LIBCEXTENSION", "") d.setVar("ABIEXTENSION", "") - d.appendVar("CANADIANEXTRAOS", " linux-gnux32 linux-uclibcx32 linux-muslx32") + d.appendVar("CANADIANEXTRAOS", " linux-gnux32") + for extraos in d.getVar("BASECANADIANEXTRAOS", True).split(): + d.appendVar("CANADIANEXTRAOS", " " + extraos + "x32") elif tarch == "powerpc": # PowerPC can build "linux" and "linux-gnuspe" d.setVar("LIBCEXTENSION", "") d.setVar("ABIEXTENSION", "") - d.appendVar("CANADIANEXTRAOS", " linux-gnuspe linux-uclibcspe linux-muslspe") + d.appendVar("CANADIANEXTRAOS", " linux-gnuspe") + for extraos in d.getVar("BASECANADIANEXTRAOS", True).split(): + d.appendVar("CANADIANEXTRAOS", " " + extraos + "spe") elif tarch == "mips64": - d.appendVar("CANADIANEXTRAOS", " linux-gnun32 linux-uclibcn32 linux-musln32") + d.appendVar("CANADIANEXTRAOS", " linux-gnun32") + for extraos in d.getVar("BASECANADIANEXTRAOS", True).split(): + d.appendVar("CANADIANEXTRAOS", " " + extraos + "n32") if tarch == "arm" or tarch == "armeb": d.setVar("TARGET_OS", "linux-gnueabi") else:
Signature · 1 line
1.9.3
Sorry forgot to setup a cover letter.
The issue is that various extra OS entries cause numerous symlinks to be set. These symlinks can cause confusion for someone looking in the directory. They may think uclibc or musl is actually supported.
However, the real problem is when you build an SDK for Windows (mingw), symlinks get expanded on installation. So you end up with a full copy of the toolchain for each symlink.
This will increase (the installed) size of the x86_64 toolchain by 600MB, for no real reason.
The change is equally applicable to master and jethro.
Quoted 13 lines · Mark Hatle
By default the system will expand the extra os entries for uclibc and musl even if they are not enabled in the build. There was no way to prevent this behavior while still getting the expansion for things like x32 or spe.
The change adds a new setting which a distribution creator can override easily, setting the base set of canadianextraos components. The other expansions are then based on this setting.
Signed-off-by Mark Hatle <[email protected]>--- meta/classes/cross-canadian.bbclass | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)
Ping!
I don't see any objection on this but this is not merged yet, is it ignored?
Thanks,
Jackie
Quoted 83 lines
-----Original Message-----
From: [email protected] [mailto:openembedded-core- [email protected]] On Behalf Of Mark Hatle
Sent: Tuesday, December 08, 2015 5:36 AM
To: [email protected]
Subject: [OE-core] [PATCH] cross-canadian.bbclass: Add BASECANADIANEXTRAOS to specify main extraosBy default the system will expand the extra os entries for uclibc and musl even if they are not enabled in the build. There was no way to prevent this behavior while still getting the expansion for things like x32 or spe.
The change adds a new setting which a distribution creator can override easily, setting the base set of canadianextraos components. The other expansions are then based on this setting.
Signed-off-by Mark Hatle <[email protected]>--- meta/classes/cross-canadian.bbclass | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)meta/classes/cross-canadian.bbclass +0
-0@@ -15,7 +15,8 @@ STAGING_BINDIR_TOOLCHAIN ="${STAGING_DIR_NATIVE}${bindir_native}/${SDK_ARCH}${S
# UpdateBASE_PACKAGE_ARCHandPACKAGE_ARCHS#
PACKAGE_ARCH= "${SDK_ARCH}-${SDKPKGSUFFIX}"meta/classes/cross-canadian.bbclass +17
-6-CANADIANEXTRAOS = "linux-uclibc linux-musl" +BASECANADIANEXTRAOS ?= "linux-uclibc linux-musl" +CANADIANEXTRAOS = "${BASECANADIANEXTRAOS}" CANADIANEXTRAVENDOR = "" MODIFYTOS ??= "1" python () {@@ -34,8 +35,13 @@ python () { tos = d.getVar("TARGET_OS", True) whitelist = [] + extralibcs = [""] + if "uclibc" in d.getVar("BASECANADIANEXTRAOS", True): + extralibcs.append("uclibc") + if "musl" in d.getVar("BASECANADIANEXTRAOS", True): + extralibcs.append("musl") for variant in ["", "spe", "x32", "eabi", "n32"]: - for libc in ["", "uclibc", "musl"]: + for libc in extralibcs: entry = "linux" if variant and libc: entry = entry + "-" + libc + variant@@ -59,14 +65,20 @@ python () { if tarch == "x86_64": d.setVar("LIBCEXTENSION", "") d.setVar("ABIEXTENSION", "") - d.appendVar("CANADIANEXTRAOS", " linux-gnux32 linux-uclibcx32 linux-muslx32") + d.appendVar("CANADIANEXTRAOS", " linux-gnux32") + for extraos in d.getVar("BASECANADIANEXTRAOS", True).split(): + d.appendVar("CANADIANEXTRAOS", " " + extraos + "x32") elif tarch == "powerpc": # PowerPC can build "linux" and "linux-gnuspe" d.setVar("LIBCEXTENSION", "") d.setVar("ABIEXTENSION", "") - d.appendVar("CANADIANEXTRAOS", " linux-gnuspe linux-uclibcspe linux-muslspe") + d.appendVar("CANADIANEXTRAOS", " linux-gnuspe") + for extraos in d.getVar("BASECANADIANEXTRAOS", True).split(): + d.appendVar("CANADIANEXTRAOS", " " + extraos + "spe") elif tarch == "mips64": - d.appendVar("CANADIANEXTRAOS", " linux-gnun32 linux-uclibcn32 linux-musln32") + d.appendVar("CANADIANEXTRAOS", " linux-gnun32") + for extraos in d.getVar("BASECANADIANEXTRAOS", True).split(): + d.appendVar("CANADIANEXTRAOS", " " + extraos + "n32") if tarch == "arm" or tarch == "armeb": d.setVar("TARGET_OS", "linux-gnueabi") else: --1.9.3
--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core