scsi: storvsc: Properly support FC hosts
Subsystems (2)
cover scsi: storvsc: Properly support FC hosts
Properly support FC hosts. Additional cleanup patches are also included.
K. Y. Srinivasan (4):
scsi: storvsc: Fix a bug in the layout of the hv_fc_wwn_packet
scsi: storvsc: Properly support Fibre Channel devices
scsi: storvsc: Refactor the code in storvsc_channel_init()
scsi: storvsc: Tighten up the interrupt path
drivers/scsi/storvsc_drv.c | 235 ++++++++++++++++++++++++++------------------ 1 files changed, 138 insertions(+), 97 deletions(-)
Signature · 1 line
1.7.4.1
PATCH 1/4 scsi: storvsc: Fix a bug in the layout of the hv_fc_wwn_packet
The hv_fc_wwn_packet is exchanged over vmbus. Make the definition in Linux match the Window's definition.
--- drivers/scsi/storvsc_drv.c | 5 ++--- 1 files changed, 2 insertions(+), 3 deletions(-)
drivers/scsi/storvsc_drv.c +2 -3
@@ -92,9 +92,8 @@ enum vstor_packet_operation {*/ struct hv_fc_wwn_packet { -bool primary_active; -u8 reserved1; -u8 reserved2; +u8 primary_active; +u8 reserved1[3 ];u8 primary_port_wwn[8 ];u8 primary_node_wwn[8 ];u8 secondary_port_wwn[8 ];
Signature · 1 line
1.7.4.1
PATCH 2/4 scsi: storvsc: Properly support Fibre Channel devices
For FC devices managed by this driver, atttach the appropriate transport template. This will allow us to create the appropriate sysfs files for these devices. With this we can publish the wwn for both the port and the node.
--- drivers/scsi/storvsc_drv.c | 100 +++++++++++++++++++++++++++++++++++++++++-- 1 files changed, 95 insertions(+), 5 deletions(-)
drivers/scsi/storvsc_drv.c +95 -5
@@ -41,6 +41,7 @@#include <scsi/scsi_eh.h> #include <scsi/scsi_devinfo.h> #include <scsi/scsi_dbg.h> +#include <scsi/scsi_transport_fc.h> /* * All wire protocol details (storage protocol between the guest and the host)
@@ -397,6 +398,7 @@ static int storvsc_timeout = 180;static int msft_blist_flags =BLIST_TRY_VPD_PAGES ; +static struct scsi_transport_template *fc_transport_template;static void storvsc_on_channel_callback (void *context);
@@ -456,6 +458,11 @@ struct storvsc_device {/* Used for vsc/vsp channel reset process */ struct storvsc_cmd_request init_request;struct storvsc_cmd_request reset_request; +/* +* Currently active port and node names for FC devices. +*/ +u64 node_name; +u64 port_name; };struct hv_host_device {
@@ -695,7 +702,26 @@ static void handle_multichannel_storage(struct hv_device *device, int max_chns)vmbus_are_subchannels_present (device->channel); } -static int storvsc_channel_init (struct hv_device *device) +static void cache_wwn (struct storvsc_device *stor_device, +struct vstor_packet *vstor_packet) +{ +/* +* Cache the currently active port and node ww names. +*/ +if (vstor_packet->wwn_packet.primary_active) { + stor_device->node_name = +wwn_to_u64 (vstor_packet->wwn_packet.primary_node_wwn); + stor_device->port_name = +wwn_to_u64 (vstor_packet->wwn_packet.primary_port_wwn); + }else { + stor_device->node_name = +wwn_to_u64 (vstor_packet->wwn_packet.secondary_node_wwn); + stor_device->port_name = +wwn_to_u64 (vstor_packet->wwn_packet.secondary_port_wwn); + } +} + +static int storvsc_channel_init (struct hv_device *device,bool is_fc) {struct storvsc_device *stor_device;struct storvsc_cmd_request *request;
@@ -837,6 +863,40 @@ static int storvsc_channel_init(struct hv_device *device) stor_device->max_transfer_bytes = vstor_packet->storage_channel_properties.max_transfer_bytes; +if (!is_fc) + goto done; + +memset (vstor_packet,0 ,sizeof (struct vstor_packet )); + vstor_packet->operation =VSTOR_OPERATION_FCHBA_DATA ; + vstor_packet->flags =REQUEST_COMPLETION_FLAG ; + + ret =vmbus_sendpacket (device->channel, vstor_packet, + (sizeof (struct vstor_packet ) - + vmscsi_size_delta), + (unsigned long )request, +VM_PKT_DATA_INBAND , +VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED ); + +if (ret !=0 ) + goto cleanup; + + t =wait_for_completion_timeout (&request->wait_event,5 *HZ ); +if (t ==0 ) { + ret = -ETIMEDOUT ; + goto cleanup; + } + +if (vstor_packet->operation !=VSTOR_OPERATION_COMPLETE_IO || + vstor_packet->status !=0 ) + goto cleanup; + +/* +* Cache the currently active port and node ww names. +*/ +cache_wwn (stor_device, vstor_packet); + +done: +memset (vstor_packet,0 ,sizeof (struct vstor_packet )); vstor_packet->operation =VSTOR_OPERATION_END_INITIALIZATION ; vstor_packet->flags =REQUEST_COMPLETION_FLAG ;
@@ -1076,6 +1136,12 @@ static void storvsc_on_receive(struct hv_device *device,schedule_work (&work->work);break ; +case VSTOR_OPERATION_FCHBA_DATA : + stor_device =get_in_stor_device (device); +cache_wwn (stor_device, vstor_packet); +fc_host_node_name (stor_device->host) = stor_device->node_name; +fc_host_port_name (stor_device->host) = stor_device->port_name; +break ;default :break ; }
@@ -1131,7 +1197,8 @@ static void storvsc_on_channel_callback(void *context)return ; } -static int storvsc_connect_to_vsp (struct hv_device *device,u32 ring_size) +static int storvsc_connect_to_vsp (struct hv_device *device,u32 ring_size, +bool is_fc) {struct vmstorage_channel_properties props;int ret;
@@ -1148,7 +1215,7 @@ static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size)if (ret !=0 )return ret; - ret =storvsc_channel_init (device); + ret =storvsc_channel_init (device, is_fc);return ret; }
@@ -1573,6 +1640,7 @@ static int storvsc_probe(struct hv_device *device,struct Scsi_Host *host;struct hv_host_device *host_dev;bool dev_is_ide = ((dev_id->driver_data ==IDE_GUID ) ? true : false); +bool is_fc = ((dev_id->driver_data ==SFC_GUID ) ? true : false);int target =0 ;struct storvsc_device *stor_device;int max_luns_per_target;
@@ -1630,7 +1698,7 @@ static int storvsc_probe(struct hv_device *device,hv_set_drvdata (device, stor_device); stor_device->port_number = host->host_no; - ret =storvsc_connect_to_vsp (device, storvsc_ringbuffer_size); + ret =storvsc_connect_to_vsp (device, storvsc_ringbuffer_size, is_fc);if (ret) goto err_out1;
@@ -1642,6 +1710,7 @@ static int storvsc_probe(struct hv_device *device, host->max_lun =STORVSC_FC_MAX_LUNS_PER_TARGET ; host->max_id =STORVSC_FC_MAX_TARGETS ; host->max_channel =STORVSC_FC_MAX_CHANNELS -1 ; + host->transportt = fc_transport_template;break ;case SCSI_GUID :
@@ -1681,6 +1750,10 @@ static int storvsc_probe(struct hv_device *device, goto err_out2; } } +if (host->transportt == fc_transport_template) { +fc_host_node_name (host) = stor_device->node_name; +fc_host_port_name (host) = stor_device->port_name; + }return 0 ; err_out2:
@@ -1706,6 +1779,8 @@ static int storvsc_remove(struct hv_device *dev)struct storvsc_device *stor_device =hv_get_drvdata (dev);struct Scsi_Host *host = stor_device->host; +if (host->transportt == fc_transport_template) +fc_remove_host (host);scsi_remove_host (host);storvsc_dev_remove (dev);scsi_host_put (host);
@@ -1720,8 +1795,14 @@ static struct hv_driver storvsc_drv = { .remove = storvsc_remove, }; +static struct fc_function_template fc_transport_functions = { + .show_host_node_name =1 , + .show_host_port_name =1 , +}; +static int __init storvsc_drv_init (void ) { +int ret;/* * Divide the ring buffer data size (which is 1 page less
@@ -1736,12 +1817,21 @@ static int __init storvsc_drv_init(void) vmscsi_size_delta, sizeof(u64))); -return vmbus_driver_register (&storvsc_drv); + fc_transport_template =fc_attach_transport (&fc_transport_functions); +if (!fc_transport_template) +return -ENODEV ; + + ret =vmbus_driver_register (&storvsc_drv); +if (ret) +fc_release_transport (fc_transport_template); + +return ret; } static void __exit storvsc_drv_exit(void) {vmbus_driver_unregister (&storvsc_drv); +fc_release_transport (fc_transport_template); }MODULE_LICENSE ("GPL" );
Signature · 1 line
1.7.4.1
Re: [PATCH 2/4] scsi: storvsc: Properly support Fibre Channel devices
Quoted 99 lines · K. Y. Srinivasan
For FC devices managed by this driver, atttach the appropriate transport template. This will allow us to create the appropriate sysfs files for these devices. With this we can publish the wwn for both the port and the node.
Signed-off-by K. Y. Srinivasan <[email protected]>Reviewed-by Long Li <[email protected]>Tested-by Alex Ng <[email protected]>--- drivers/scsi/storvsc_drv.c | 100 +++++++++++++++++++++++++++++++++++++++++-- 1 files changed, 95 insertions(+), 5 deletions(-)drivers/scsi/storvsc_drv.c +51
-1@@ -41,6 +41,7 @@#include <scsi/scsi_eh.h> #include <scsi/scsi_devinfo.h> #include <scsi/scsi_dbg.h> +#include <scsi/scsi_transport_fc.h> /* * All wire protocol details (storage protocol between the guest and the host) @@ -397,6 +398,7 @@ static int storvsc_timeout = 180;static int msft_blist_flags =BLIST_TRY_VPD_PAGES ; +static struct scsi_transport_template *fc_transport_template;static void storvsc_on_channel_callback (void *context);@@ -456,6 +458,11 @@ struct storvsc_device {/* Used for vsc/vsp channel reset process */ struct storvsc_cmd_request init_request;struct storvsc_cmd_request reset_request; +/* +* Currently active port and node names for FC devices. +*/ +u64 node_name; +u64 port_name; };struct hv_host_device {@@ -695,7 +702,26 @@ static void handle_multichannel_storage(struct hv_device *device, int max_chns)vmbus_are_subchannels_present (device->channel); } -static int storvsc_channel_init (struct hv_device *device) +static void cache_wwn (struct storvsc_device *stor_device, +struct vstor_packet *vstor_packet) +{ +/* +* Cache the currently active port and node ww names. +*/ +if (vstor_packet->wwn_packet.primary_active) { + stor_device->node_name = +wwn_to_u64 (vstor_packet->wwn_packet.primary_node_wwn); + stor_device->port_name = +wwn_to_u64 (vstor_packet->wwn_packet.primary_port_wwn); + }else { + stor_device->node_name = +wwn_to_u64 (vstor_packet->wwn_packet.secondary_node_wwn); + stor_device->port_name = +wwn_to_u64 (vstor_packet->wwn_packet.secondary_port_wwn); + } +} + +static int storvsc_channel_init (struct hv_device *device,bool is_fc) {struct storvsc_device *stor_device;struct storvsc_cmd_request *request;@@ -837,6 +863,40 @@ static int storvsc_channel_init(struct hv_device *device) stor_device->max_transfer_bytes = vstor_packet->storage_channel_properties.max_transfer_bytes; +if (!is_fc) + goto done; + +memset (vstor_packet,0 ,sizeof (struct vstor_packet )); + vstor_packet->operation =VSTOR_OPERATION_FCHBA_DATA ; + vstor_packet->flags =REQUEST_COMPLETION_FLAG ; + + ret =vmbus_sendpacket (device->channel, vstor_packet, + (sizeof (struct vstor_packet ) - + vmscsi_size_delta), + (unsigned long )request, +VM_PKT_DATA_INBAND , +VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED ); + +if (ret !=0 ) + goto cleanup; + + t =wait_for_completion_timeout (&request->wait_event,5 *HZ ); +if (t ==0 ) { + ret = -ETIMEDOUT ; + goto cleanup; + } + + if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
drivers/scsi/storvsc_drv.c static int storvsc_channel_init(struct hv_device *device) · line 899
Quoted 10 lines
drivers/scsi/storvsc_drv.c +10
-0+ vstor_packet->status != 0) + goto cleanup; + +/* +* Cache the currently active port and node ww names. +*/ +cache_wwn (stor_device, vstor_packet); + +done: +
That goto use is a bit weird. I see you did it because of the 80 chars limit but
if (is_fc) {
[...]
}is way more readable IMHO.
Quoted 125 lines
drivers/scsi/storvsc_drv.c +34
-4memset (vstor_packet,0 ,sizeof (struct vstor_packet )); vstor_packet->operation =VSTOR_OPERATION_END_INITIALIZATION ; vstor_packet->flags =REQUEST_COMPLETION_FLAG ;@@ -1076,6 +1136,12 @@ static void storvsc_on_receive(struct hv_device *device,schedule_work (&work->work);break ; +case VSTOR_OPERATION_FCHBA_DATA : + stor_device =get_in_stor_device (device); +cache_wwn (stor_device, vstor_packet); +fc_host_node_name (stor_device->host) = stor_device->node_name; +fc_host_port_name (stor_device->host) = stor_device->port_name; +break ;default :break ; }@@ -1131,7 +1197,8 @@ static void storvsc_on_channel_callback(void *context)return ; } -static int storvsc_connect_to_vsp (struct hv_device *device,u32 ring_size) +static int storvsc_connect_to_vsp (struct hv_device *device,u32 ring_size, +bool is_fc) {struct vmstorage_channel_properties props;int ret;@@ -1148,7 +1215,7 @@ static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size)if (ret !=0 )return ret; - ret =storvsc_channel_init (device); + ret =storvsc_channel_init (device, is_fc);return ret; }@@ -1573,6 +1640,7 @@ static int storvsc_probe(struct hv_device *device,struct Scsi_Host *host;struct hv_host_device *host_dev;bool dev_is_ide = ((dev_id->driver_data ==IDE_GUID ) ? true : false); +bool is_fc = ((dev_id->driver_data ==SFC_GUID ) ? true : false);int target =0 ;struct storvsc_device *stor_device;int max_luns_per_target;@@ -1630,7 +1698,7 @@ static int storvsc_probe(struct hv_device *device,hv_set_drvdata (device, stor_device); stor_device->port_number = host->host_no; - ret =storvsc_connect_to_vsp (device, storvsc_ringbuffer_size); + ret =storvsc_connect_to_vsp (device, storvsc_ringbuffer_size, is_fc);if (ret) goto err_out1;@@ -1642,6 +1710,7 @@ static int storvsc_probe(struct hv_device *device, host->max_lun =STORVSC_FC_MAX_LUNS_PER_TARGET ; host->max_id =STORVSC_FC_MAX_TARGETS ; host->max_channel =STORVSC_FC_MAX_CHANNELS -1 ; + host->transportt = fc_transport_template;break ;case SCSI_GUID :@@ -1681,6 +1750,10 @@ static int storvsc_probe(struct hv_device *device, goto err_out2; } } +if (host->transportt == fc_transport_template) { +fc_host_node_name (host) = stor_device->node_name; +fc_host_port_name (host) = stor_device->port_name; + }return 0 ; err_out2:@@ -1706,6 +1779,8 @@ static int storvsc_remove(struct hv_device *dev)struct storvsc_device *stor_device =hv_get_drvdata (dev);struct Scsi_Host *host = stor_device->host; +if (host->transportt == fc_transport_template) +fc_remove_host (host);scsi_remove_host (host);storvsc_dev_remove (dev);scsi_host_put (host);@@ -1720,8 +1795,14 @@ static struct hv_driver storvsc_drv = { .remove = storvsc_remove, }; +static struct fc_function_template fc_transport_functions = { + .show_host_node_name =1 , + .show_host_port_name =1 , +}; +static int __init storvsc_drv_init (void ) { +int ret;/* * Divide the ring buffer data size (which is 1 page less @@ -1736,12 +1817,21 @@ static int __init storvsc_drv_init(void) vmscsi_size_delta, sizeof(u64))); -return vmbus_driver_register (&storvsc_drv); + fc_transport_template =fc_attach_transport (&fc_transport_functions); +if (!fc_transport_template) +return -ENODEV ; + + ret =vmbus_driver_register (&storvsc_drv); +if (ret) +fc_release_transport (fc_transport_template); + +return ret; } static void __exit storvsc_drv_exit(void) {vmbus_driver_unregister (&storvsc_drv); +fc_release_transport (fc_transport_template); }MODULE_LICENSE ("GPL" );Signature · 6 lines
1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 6 lines
Johannes Thumshirn Storage [email protected] +49 911 74053 689 SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) Key fingerprint = EC38 9CAB C2C4 F25D 8600 D0D0 0393 969D 2D76 0850
Re: [PATCH 2/4] scsi: storvsc: Properly support Fibre Channel devices
In reply to K. Y. SrinivasanQuoted 9 lines · K. Y. Srinivasan
drivers/scsi/storvsc_drv.c +9
-0+ ret =vmbus_sendpacket (device->channel, vstor_packet, + (sizeof (struct vstor_packet ) - + vmscsi_size_delta), + (unsigned long )request, +VM_PKT_DATA_INBAND , +VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED ); + +if (ret !=0 ) + goto cleanup;
drivers/scsi/storvsc_drv.c static int storvsc_channel_init(struct hv_device *device) · line 891
Quoted 10 lines
drivers/scsi/storvsc_drv.c +10
-0+ + t =wait_for_completion_timeout (&request->wait_event,5 *HZ ); +if (t ==0 ) { + ret = -ETIMEDOUT ; + goto cleanup; + } + +if (vstor_packet->operation !=VSTOR_OPERATION_COMPLETE_IO || + vstor_packet->status !=0 ) + goto cleanup;
"cleanup" is a misleading name because it doesn't clean up anything. Do nothing gotos are a pain in the butt and they always introduce bugs. For example, you appear to have forgotten to set the error code. But because it's a do-nothing goto it's ambiguous so perhaps returning success was intended.
Empirically this style of coding causes bugs. It does not prevent them. It is a bad style if you believe in measuring, evidence and science.
regards,
dan carpenter
RE: [PATCH 2/4] scsi: storvsc: Properly support Fibre Channel devices
Quoted 42 lines
-----Original Message-----
From: Dan Carpenter [mailto:[email protected]]
Sent: Friday, December 11, 2015 2:25 AM
To: KY Srinivasan <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]
Subject: Re: [PATCH 2/4] scsi: storvsc: Properly support Fibre Channel devicesdrivers/scsi/storvsc_drv.c static int storvsc_channel_init(struct hv_device *device) · line 879
Quoted 6 lines · K. Y. Srinivasan
drivers/scsi/storvsc_drv.c +6
-0+ ret = vmbus_sendpacket(device->channel, vstor_packet, + (sizeof(struct vstor_packet) - + vmscsi_size_delta), + (unsigned long)request, + VM_PKT_DATA_INBAND, +
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);drivers/scsi/storvsc_drv.c static int storvsc_channel_init(struct hv_device *device)
Quoted 11 lines
drivers/scsi/storvsc_drv.c +11
-0+ +if (ret !=0 ) + goto cleanup; + + t =wait_for_completion_timeout (&request->wait_event,5 *HZ ); +if (t ==0 ) { + ret = -ETIMEDOUT ; + goto cleanup; + } + + if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO|| > + vstor_packet->status != 0)Review
Quoted 1 line
(quoted diff) +1
-0+ goto cleanup;"cleanup" is a misleading name because it doesn't clean up anything. Do nothing gotos are a pain in the butt and they always introduce bugs. For example, you appear to have forgotten to set the error code. But because it's a do-nothing goto it's ambiguous so perhaps returning success was intended.
Quoted 2 lines
Empirically this style of coding causes bugs. It does not prevent them. It is a bad style if you believe in measuring, evidence and science.
Thanks Dan. I will fix this and resend.
K. Y
PATCH 3/4 scsi: storvsc: Refactor the code in storvsc_channel_init()
In reply to K. Y. SrinivasanThe function storvsc_channel_init() repeatedly interacts with the host to extract various channel properties. Refactor this code to eliminate code repetition.
--- drivers/scsi/storvsc_drv.c | 155 ++++++++++++++++---------------------------- 1 files changed, 57 insertions(+), 98 deletions(-)
drivers/scsi/storvsc_drv.c +57 -98
@@ -721,29 +721,16 @@ static void cache_wwn(struct storvsc_device *stor_device, } } -static int storvsc_channel_init (struct hv_device *device,bool is_fc) +static int storvsc_execute_vstor_op (struct hv_device *device, +struct storvsc_cmd_request *request, +bool status_check) { -struct storvsc_device *stor_device; -struct storvsc_cmd_request *request;struct vstor_packet *vstor_packet; -int ret, t, i; -int max_chns; -bool process_sub_channels = false; - - stor_device =get_out_stor_device (device); -if (!stor_device) -return -ENODEV ; +int ret, t; - request = &stor_device->init_request; vstor_packet = &request->vstor_packet; -/* -* Now, initiate the vsc/vsp initialization protocol on the open -* channel -*/ -memset (request,0 ,sizeof (struct storvsc_cmd_request ));init_completion (&request->wait_event); - vstor_packet->operation =VSTOR_OPERATION_BEGIN_INITIALIZATION ; vstor_packet->flags =REQUEST_COMPLETION_FLAG ; ret = vmbus_sendpacket(device->channel, vstor_packet,
@@ -753,27 +740,62 @@ static int storvsc_channel_init(struct hv_device *device, bool is_fc)VM_PKT_DATA_INBAND , VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);if (ret !=0 ) - goto cleanup; + goto done; t =wait_for_completion_timeout (&request->wait_event,5 *HZ );if (t ==0 ) { ret = -ETIMEDOUT ; - goto cleanup; + goto done; } +if (!status_check) + goto done; +if (vstor_packet->operation !=VSTOR_OPERATION_COMPLETE_IO || vstor_packet->status !=0 ) { ret = -EINVAL ; - goto cleanup; + goto done; } +done: +return ret; +} + +static int storvsc_channel_init (struct hv_device *device,bool is_fc) +{ +struct storvsc_device *stor_device; +struct storvsc_cmd_request *request; +struct vstor_packet *vstor_packet; +int ret, i; +int max_chns; +bool process_sub_channels = false; + + stor_device =get_out_stor_device (device); +if (!stor_device) +return -ENODEV ; + + request = &stor_device->init_request; + vstor_packet = &request->vstor_packet; + +/* +* Now, initiate the vsc/vsp initialization protocol on the open +* channel +*/ +memset (request,0 ,sizeof (struct storvsc_cmd_request )); + vstor_packet->operation =VSTOR_OPERATION_BEGIN_INITIALIZATION ; + ret =storvsc_execute_vstor_op (device, request, true); +if (ret) + goto cleanup; + +/* +* Query host supported protocol version. +*/ for (i =0 ; i <ARRAY_SIZE (vmstor_protocols); i++) {/* reuse the packet for version range supported */ memset (vstor_packet,0 ,sizeof (struct vstor_packet )); vstor_packet->operation =VSTOR_OPERATION_QUERY_PROTOCOL_VERSION ; - vstor_packet->flags =REQUEST_COMPLETION_FLAG ; vstor_packet->version.major_minor = vmstor_protocols[i].protocol_version;
@@ -783,20 +805,9 @@ static int storvsc_channel_init(struct hv_device *device, bool is_fc)*/ vstor_packet->version.revision =0 ; - ret =vmbus_sendpacket (device->channel, vstor_packet, - (sizeof (struct vstor_packet ) - - vmscsi_size_delta), - (unsigned long )request, -VM_PKT_DATA_INBAND , -VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED ); -if (ret !=0 ) - goto cleanup; - - t =wait_for_completion_timeout (&request->wait_event,5 *HZ ); -if (t ==0 ) { - ret = -ETIMEDOUT ; + ret =storvsc_execute_vstor_op (device, request, false); +if (ret) goto cleanup; - }if (vstor_packet->operation !=VSTOR_OPERATION_COMPLETE_IO ) { ret = -EINVAL ;
@@ -822,32 +833,14 @@ static int storvsc_channel_init(struct hv_device *device, bool is_fc) goto cleanup; } - +/* +* Query channel properties. +*/ memset (vstor_packet,0 ,sizeof (struct vstor_packet )); vstor_packet->operation =VSTOR_OPERATION_QUERY_PROPERTIES ; - vstor_packet->flags =REQUEST_COMPLETION_FLAG ; - - ret =vmbus_sendpacket (device->channel, vstor_packet, - (sizeof (struct vstor_packet ) - - vmscsi_size_delta), - (unsigned long )request, -VM_PKT_DATA_INBAND , -VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED ); - -if (ret !=0 ) - goto cleanup; - - t =wait_for_completion_timeout (&request->wait_event,5 *HZ ); -if (t ==0 ) { - ret = -ETIMEDOUT ; - goto cleanup; - } - -if (vstor_packet->operation !=VSTOR_OPERATION_COMPLETE_IO || - vstor_packet->status !=0 ) { - ret = -EINVAL ; + ret =storvsc_execute_vstor_op (device, request, true); +if (ret) goto cleanup; - }/* * Check to see if multi-channel support is there.
@@ -866,30 +859,15 @@ static int storvsc_channel_init(struct hv_device *device, bool is_fc)if (!is_fc) goto done; +/* +* For FC devices retrieve FC HBA data. +*/ memset (vstor_packet,0 ,sizeof (struct vstor_packet )); vstor_packet->operation =VSTOR_OPERATION_FCHBA_DATA ; - vstor_packet->flags =REQUEST_COMPLETION_FLAG ; - ret =vmbus_sendpacket (device->channel, vstor_packet, - (sizeof (struct vstor_packet ) - - vmscsi_size_delta), - (unsigned long )request, -VM_PKT_DATA_INBAND , -VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED ); - -if (ret !=0 ) - goto cleanup; - - t =wait_for_completion_timeout (&request->wait_event,5 *HZ ); -if (t ==0 ) { - ret = -ETIMEDOUT ; - goto cleanup; - } - -if (vstor_packet->operation !=VSTOR_OPERATION_COMPLETE_IO || - vstor_packet->status !=0 ) + ret =storvsc_execute_vstor_op (device, request, true); +if (ret) goto cleanup; -/* * Cache the currently active port and node ww names. */
@@ -899,29 +877,10 @@ done:memset (vstor_packet,0 ,sizeof (struct vstor_packet )); vstor_packet->operation =VSTOR_OPERATION_END_INITIALIZATION ; - vstor_packet->flags =REQUEST_COMPLETION_FLAG ; - ret =vmbus_sendpacket (device->channel, vstor_packet, - (sizeof (struct vstor_packet ) - - vmscsi_size_delta), - (unsigned long )request, -VM_PKT_DATA_INBAND , -VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED ); - -if (ret !=0 ) - goto cleanup; - - t =wait_for_completion_timeout (&request->wait_event,5 *HZ ); -if (t ==0 ) { - ret = -ETIMEDOUT ; - goto cleanup; - } - -if (vstor_packet->operation !=VSTOR_OPERATION_COMPLETE_IO || - vstor_packet->status !=0 ) { - ret = -EINVAL ; + ret =storvsc_execute_vstor_op (device, request, true); +if (ret) goto cleanup; - }if (process_sub_channels)handle_multichannel_storage (device, max_chns);
Signature · 1 line
1.7.4.1
Re: [PATCH 3/4] scsi: storvsc: Refactor the code in storvsc_channel_init()
Quoted 252 lines · K. Y. Srinivasan
The function
storvsc_channel_init()repeatedly interacts with the host to extract various channel properties. Refactor this code to eliminate code repetition.Signed-off-by K. Y. Srinivasan <[email protected]>Reviewed-by Long Li <[email protected]>Tested-by Alex Ng <[email protected]>--- drivers/scsi/storvsc_drv.c | 155 ++++++++++++++++---------------------------- 1 files changed, 57 insertions(+), 98 deletions(-)drivers/scsi/storvsc_drv.c +57
-98@@ -721,29 +721,16 @@ static void cache_wwn(struct storvsc_device *stor_device, } } -static int storvsc_channel_init (struct hv_device *device,bool is_fc) +static int storvsc_execute_vstor_op (struct hv_device *device, +struct storvsc_cmd_request *request, +bool status_check) { -struct storvsc_device *stor_device; -struct storvsc_cmd_request *request;struct vstor_packet *vstor_packet; -int ret, t, i; -int max_chns; -bool process_sub_channels = false; - - stor_device =get_out_stor_device (device); -if (!stor_device) -return -ENODEV ; +int ret, t; - request = &stor_device->init_request; vstor_packet = &request->vstor_packet; -/* -* Now, initiate the vsc/vsp initialization protocol on the open -* channel -*/ -memset (request,0 ,sizeof (struct storvsc_cmd_request ));init_completion (&request->wait_event); - vstor_packet->operation =VSTOR_OPERATION_BEGIN_INITIALIZATION ; vstor_packet->flags =REQUEST_COMPLETION_FLAG ; ret = vmbus_sendpacket(device->channel, vstor_packet,@@ -753,27 +740,62 @@ static int storvsc_channel_init(struct hv_device *device, bool is_fc)VM_PKT_DATA_INBAND , VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);if (ret !=0 ) - goto cleanup; + goto done; t =wait_for_completion_timeout (&request->wait_event,5 *HZ );if (t ==0 ) { ret = -ETIMEDOUT ; - goto cleanup; + goto done; } +if (!status_check) + goto done; +if (vstor_packet->operation !=VSTOR_OPERATION_COMPLETE_IO || vstor_packet->status !=0 ) { ret = -EINVAL ; - goto cleanup; + goto done; } +done: +return ret; +} + +static int storvsc_channel_init (struct hv_device *device,bool is_fc) +{ +struct storvsc_device *stor_device; +struct storvsc_cmd_request *request; +struct vstor_packet *vstor_packet; +int ret, i; +int max_chns; +bool process_sub_channels = false; + + stor_device =get_out_stor_device (device); +if (!stor_device) +return -ENODEV ; + + request = &stor_device->init_request; + vstor_packet = &request->vstor_packet; + +/* +* Now, initiate the vsc/vsp initialization protocol on the open +* channel +*/ +memset (request,0 ,sizeof (struct storvsc_cmd_request )); + vstor_packet->operation =VSTOR_OPERATION_BEGIN_INITIALIZATION ; + ret =storvsc_execute_vstor_op (device, request, true); +if (ret) + goto cleanup; + +/* +* Query host supported protocol version. +*/ for (i =0 ; i <ARRAY_SIZE (vmstor_protocols); i++) {/* reuse the packet for version range supported */ memset (vstor_packet,0 ,sizeof (struct vstor_packet )); vstor_packet->operation =VSTOR_OPERATION_QUERY_PROTOCOL_VERSION ; - vstor_packet->flags =REQUEST_COMPLETION_FLAG ; vstor_packet->version.major_minor = vmstor_protocols[i].protocol_version;@@ -783,20 +805,9 @@ static int storvsc_channel_init(struct hv_device *device, bool is_fc)*/ vstor_packet->version.revision =0 ; - ret =vmbus_sendpacket (device->channel, vstor_packet, - (sizeof (struct vstor_packet ) - - vmscsi_size_delta), - (unsigned long )request, -VM_PKT_DATA_INBAND , -VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED ); -if (ret !=0 ) - goto cleanup; - - t =wait_for_completion_timeout (&request->wait_event,5 *HZ ); -if (t ==0 ) { - ret = -ETIMEDOUT ; + ret =storvsc_execute_vstor_op (device, request, false); +if (ret) goto cleanup; - }if (vstor_packet->operation !=VSTOR_OPERATION_COMPLETE_IO ) { ret = -EINVAL ;@@ -822,32 +833,14 @@ static int storvsc_channel_init(struct hv_device *device, bool is_fc) goto cleanup; } - +/* +* Query channel properties. +*/ memset (vstor_packet,0 ,sizeof (struct vstor_packet )); vstor_packet->operation =VSTOR_OPERATION_QUERY_PROPERTIES ; - vstor_packet->flags =REQUEST_COMPLETION_FLAG ; - - ret =vmbus_sendpacket (device->channel, vstor_packet, - (sizeof (struct vstor_packet ) - - vmscsi_size_delta), - (unsigned long )request, -VM_PKT_DATA_INBAND , -VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED ); - -if (ret !=0 ) - goto cleanup; - - t =wait_for_completion_timeout (&request->wait_event,5 *HZ ); -if (t ==0 ) { - ret = -ETIMEDOUT ; - goto cleanup; - } - -if (vstor_packet->operation !=VSTOR_OPERATION_COMPLETE_IO || - vstor_packet->status !=0 ) { - ret = -EINVAL ; + ret =storvsc_execute_vstor_op (device, request, true); +if (ret) goto cleanup; - }/* * Check to see if multi-channel support is there. @@ -866,30 +859,15 @@ static int storvsc_channel_init(struct hv_device *device, bool is_fc)if (!is_fc) goto done; +/* +* For FC devices retrieve FC HBA data. +*/ memset (vstor_packet,0 ,sizeof (struct vstor_packet )); vstor_packet->operation =VSTOR_OPERATION_FCHBA_DATA ; - vstor_packet->flags =REQUEST_COMPLETION_FLAG ; - ret =vmbus_sendpacket (device->channel, vstor_packet, - (sizeof (struct vstor_packet ) - - vmscsi_size_delta), - (unsigned long )request, -VM_PKT_DATA_INBAND , -VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED ); - -if (ret !=0 ) - goto cleanup; - - t =wait_for_completion_timeout (&request->wait_event,5 *HZ ); -if (t ==0 ) { - ret = -ETIMEDOUT ; - goto cleanup; - } - -if (vstor_packet->operation !=VSTOR_OPERATION_COMPLETE_IO || - vstor_packet->status !=0 ) + ret =storvsc_execute_vstor_op (device, request, true); +if (ret) goto cleanup; -/* * Cache the currently active port and node ww names. */ @@ -899,29 +877,10 @@ done:memset (vstor_packet,0 ,sizeof (struct vstor_packet )); vstor_packet->operation =VSTOR_OPERATION_END_INITIALIZATION ; - vstor_packet->flags =REQUEST_COMPLETION_FLAG ; - ret =vmbus_sendpacket (device->channel, vstor_packet, - (sizeof (struct vstor_packet ) - - vmscsi_size_delta), - (unsigned long )request, -VM_PKT_DATA_INBAND , -VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED ); - -if (ret !=0 ) - goto cleanup; - - t =wait_for_completion_timeout (&request->wait_event,5 *HZ ); -if (t ==0 ) { - ret = -ETIMEDOUT ; - goto cleanup; - } - -if (vstor_packet->operation !=VSTOR_OPERATION_COMPLETE_IO || - vstor_packet->status !=0 ) { - ret = -EINVAL ; + ret =storvsc_execute_vstor_op (device, request, true); +if (ret) goto cleanup; - }if (process_sub_channels)handle_multichannel_storage (device, max_chns);Signature · 6 lines
1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 6 lines
Johannes Thumshirn Storage [email protected] +49 911 74053 689 SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) Key fingerprint = EC38 9CAB C2C4 F25D 8600 D0D0 0393 969D 2D76 0850
Re: [PATCH 3/4] scsi: storvsc: Refactor the code in storvsc_channel_init()
In reply to K. Y. SrinivasanQuoted 6 lines · K. Y. Srinivasan
drivers/scsi/storvsc_drv.c +1
-1@@ -753,27 +740,62 @@ static int storvsc_channel_init(struct hv_device *device, bool is_fc)VM_PKT_DATA_INBAND , VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);if (ret !=0 ) - goto cleanup; + goto done;
drivers/scsi/storvsc_drv.c static int storvsc_channel_init(struct hv_device *device, bool is_fc) · line 752
Quoted 10 lines
drivers/scsi/storvsc_drv.c +3
-1t =wait_for_completion_timeout (&request->wait_event,5 *HZ );if (t ==0 ) { ret = -ETIMEDOUT ; - goto cleanup; + goto done; } +if (!status_check) + goto done;
See? This goto looks exactly the same as the earlier buggy goto but it's actually correct. Meanwhile if you just used an explicit "return 0;" then it would be easy to understand.
I rant about this all the time but it's because it's bad deliberately. It's normal to have bugs, but this deliberate stuff really I can't understand it...
Quoted 27 lines
drivers/scsi/storvsc_drv.c +21
-1+if (vstor_packet->operation !=VSTOR_OPERATION_COMPLETE_IO || vstor_packet->status !=0 ) { ret = -EINVAL ; - goto cleanup; + goto done; } +done: +return ret; +} + +static int storvsc_channel_init (struct hv_device *device,bool is_fc) +{ +struct storvsc_device *stor_device; +struct storvsc_cmd_request *request; +struct vstor_packet *vstor_packet; +int ret, i; +int max_chns; +bool process_sub_channels = false; + + stor_device =get_out_stor_device (device); +if (!stor_device) +return -ENODEV ; + + request = &stor_device->init_request; + vstor_packet = &request->vstor_packet;
drivers/scsi/storvsc_drv.c static int storvsc_channel_init(struct hv_device *device, bool is_fc) · line 788
Quoted 10 lines
drivers/scsi/storvsc_drv.c +10
-0+ +/* +* Now, initiate the vsc/vsp initialization protocol on the open +* channel +*/ +memset (request,0 ,sizeof (struct storvsc_cmd_request )); + vstor_packet->operation =VSTOR_OPERATION_BEGIN_INITIALIZATION ; + ret =storvsc_execute_vstor_op (device, request, true); +if (ret) + goto cleanup;
10 lines earlier there is an explicit "return -ENODEV" so it's not as if writing explicit returns will kill you.
regards,
dan carpenter
RE: [PATCH 3/4] scsi: storvsc: Refactor the code in storvsc_channel_init()
Quoted 78 lines
-----Original Message-----
From: Dan Carpenter [mailto:[email protected]]
Sent: Friday, December 11, 2015 2:41 AM
To: KY Srinivasan <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]
Subject: Re: [PATCH 3/4] scsi: storvsc: Refactor the code instorvsc_channel_init()Review static int storvsc_channel_init(struct hv_device
Quoted 1 line · K. Y. Srinivasan
(quoted diff) +0
-0@@ -753,27 +740,62 @@ static int storvsc_channel_init(struct hv_device*device, bool
is_fc)drivers/scsi/storvsc_drv.c static int storvsc_channel_init(struct hv_device *device, bool is_fc) · line 744
Quoted 2 lines
drivers/scsi/storvsc_drv.c +0
-0VM_PKT_DATA_INBAND,
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);drivers/scsi/storvsc_drv.c static int storvsc_channel_init(struct hv_device *device, bool is_fc) · line 752
Quoted 13 lines
drivers/scsi/storvsc_drv.c +4
-2if (ret !=0 ) - goto cleanup; + goto done; t =wait_for_completion_timeout (&request->wait_event,5 *HZ );if (t ==0 ) { ret = -ETIMEDOUT ; - goto cleanup; + goto done; } +if (!status_check) + goto done;See? This goto looks exactly the same as the earlier buggy goto but it's actually correct. Meanwhile if you just used an explicit "return 0;" then it would be easy to understand.
I rant about this all the time but it's because it's bad deliberately. It's normal to have bugs, but this deliberate stuff really I can't understand it...
Review static int storvsc_channel_init(struct hv_device · line 754
Quoted 2 lines
(quoted diff) +1
-0+ if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO|| > vstor_packet->status != 0) { > ret = -EINVAL;Quoted 20 lines
drivers/scsi/storvsc_drv.c +17
-1- goto cleanup; + goto done; } +done: +return ret; +} + +static int storvsc_channel_init (struct hv_device *device,bool is_fc) +{ +struct storvsc_device *stor_device; +struct storvsc_cmd_request *request; +struct vstor_packet *vstor_packet; +int ret, i; +int max_chns; +bool process_sub_channels = false; + + stor_device =get_out_stor_device (device); +if (!stor_device) +return -ENODEV ;drivers/scsi/storvsc_drv.c static int storvsc_channel_init(struct hv_device *device, bool is_fc)
Quoted 10 lines
drivers/scsi/storvsc_drv.c +10
-0+ + request = &stor_device->init_request; + vstor_packet = &request->vstor_packet; + +/* +* Now, initiate the vsc/vsp initialization protocol on the open +* channel +*/ +memset (request,0 ,sizeof (struct storvsc_cmd_request )); + vstor_packet->operation =
VSTOR_OPERATION_BEGIN_INITIALIZATION;
Quoted 6 lines
drivers/scsi/storvsc_drv.c static int storvsc_channel_init(struct hv_device *device, bool is_fc) · line 788
Quoted 3 lines
drivers/scsi/storvsc_drv.c +3
-0+ ret =storvsc_execute_vstor_op (device, request, true); +if (ret) + goto cleanup;10 lines earlier there is an explicit "return
-ENODEV" so it's not as if writing explicit returns will kill you.
Thanks Dan; I will cleanup the code and resend.
Regards,
K. Y
PATCH 4/4 scsi: storvsc: Tighten up the interrupt path
In reply to K. Y. SrinivasanOn the interrupt path, we repeatedly establish the pointer to the storvsc_device. Fix this.
--- drivers/scsi/storvsc_drv.c | 23 ++++++++--------------- 1 files changed, 8 insertions(+), 15 deletions(-)
drivers/scsi/storvsc_drv.c +8 -15
@@ -958,19 +958,16 @@ static void storvsc_handle_error(struct vmscsi_request *vm_srb, } -static void storvsc_command_completion (struct storvsc_cmd_request *cmd_request) +static void storvsc_command_completion (struct storvsc_cmd_request *cmd_request, +struct storvsc_device *stor_dev) {struct scsi_cmnd *scmnd = cmd_request->cmd; -struct hv_host_device *host_dev =shost_priv (scmnd->device->host);struct scsi_sense_hdr sense_hdr;struct vmscsi_request *vm_srb;struct Scsi_Host *host; -struct storvsc_device *stor_dev; -struct hv_device *dev = host_dev->dev;u32 payload_sz = cmd_request->payload_sz;void *payload = cmd_request->payload; - stor_dev =get_in_stor_device (dev); host = stor_dev->host; vm_srb = &cmd_request->vstor_packet.vm_srb;
@@ -1000,14 +997,13 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)kfree (payload); } -static void storvsc_on_io_completion (struct hv_device *device, +static void storvsc_on_io_completion (struct storvsc_device *stor_device,struct vstor_packet *vstor_packet,struct storvsc_cmd_request *request) { -struct storvsc_device *stor_device;struct vstor_packet *stor_pkt; +struct hv_device *device = stor_device->device; - stor_device =hv_get_drvdata (device); stor_pkt = &request->vstor_packet;/*
@@ -1062,7 +1058,7 @@ static void storvsc_on_io_completion(struct hv_device *device, stor_pkt->vm_srb.data_transfer_length = vstor_packet->vm_srb.data_transfer_length; -storvsc_command_completion (request); +storvsc_command_completion (request, stor_device);if (atomic_dec_and_test (&stor_device->num_outstanding_req) && stor_device->drain_notify)
@@ -1071,21 +1067,19 @@ static void storvsc_on_io_completion(struct hv_device *device, } -static void storvsc_on_receive (struct hv_device *device, +static void storvsc_on_receive (struct storvsc_device *stor_device,struct vstor_packet *vstor_packet,struct storvsc_cmd_request *request) {struct storvsc_scan_work *work; -struct storvsc_device *stor_device;switch (vstor_packet->operation) {case VSTOR_OPERATION_COMPLETE_IO : -storvsc_on_io_completion (device, vstor_packet, request); +storvsc_on_io_completion (stor_device, vstor_packet, request);break ;case VSTOR_OPERATION_REMOVE_DEVICE :case VSTOR_OPERATION_ENUMERATE_BUS : - stor_device =get_in_stor_device (device); work =kmalloc (sizeof (struct storvsc_scan_work ),GFP_ATOMIC );if (!work)return ;
@@ -1096,7 +1090,6 @@ static void storvsc_on_receive(struct hv_device *device,break ;case VSTOR_OPERATION_FCHBA_DATA : - stor_device =get_in_stor_device (device);cache_wwn (stor_device, vstor_packet);fc_host_node_name (stor_device->host) = stor_device->node_name;fc_host_port_name (stor_device->host) = stor_device->port_name;
@@ -1144,7 +1137,7 @@ static void storvsc_on_channel_callback(void *context) vmscsi_size_delta));complete (&request->wait_event); }else { -storvsc_on_receive (device, +storvsc_on_receive (stor_device, (struct vstor_packet *)packet, request); }
Signature · 1 line
1.7.4.1
Re: [PATCH 4/4] scsi: storvsc: Tighten up the interrupt path
Quoted 110 lines · K. Y. Srinivasan
On the interrupt path, we repeatedly establish the pointer to the
storvsc_device. Fix this.Signed-off-by K. Y. Srinivasan <[email protected]>Reviewed-by Long Li <[email protected]>Tested-by Alex Ng <[email protected]>--- drivers/scsi/storvsc_drv.c | 23 ++++++++--------------- 1 files changed, 8 insertions(+), 15 deletions(-)drivers/scsi/storvsc_drv.c +8
-15@@ -958,19 +958,16 @@ static void storvsc_handle_error(struct vmscsi_request *vm_srb, } -static void storvsc_command_completion (struct storvsc_cmd_request *cmd_request) +static void storvsc_command_completion (struct storvsc_cmd_request *cmd_request, +struct storvsc_device *stor_dev) {struct scsi_cmnd *scmnd = cmd_request->cmd; -struct hv_host_device *host_dev =shost_priv (scmnd->device->host);struct scsi_sense_hdr sense_hdr;struct vmscsi_request *vm_srb;struct Scsi_Host *host; -struct storvsc_device *stor_dev; -struct hv_device *dev = host_dev->dev;u32 payload_sz = cmd_request->payload_sz;void *payload = cmd_request->payload; - stor_dev =get_in_stor_device (dev); host = stor_dev->host; vm_srb = &cmd_request->vstor_packet.vm_srb;@@ -1000,14 +997,13 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)kfree (payload); } -static void storvsc_on_io_completion (struct hv_device *device, +static void storvsc_on_io_completion (struct storvsc_device *stor_device,struct vstor_packet *vstor_packet,struct storvsc_cmd_request *request) { -struct storvsc_device *stor_device;struct vstor_packet *stor_pkt; +struct hv_device *device = stor_device->device; - stor_device =hv_get_drvdata (device); stor_pkt = &request->vstor_packet;/* @@ -1062,7 +1058,7 @@ static void storvsc_on_io_completion(struct hv_device *device, stor_pkt->vm_srb.data_transfer_length = vstor_packet->vm_srb.data_transfer_length; -storvsc_command_completion (request); +storvsc_command_completion (request, stor_device);if (atomic_dec_and_test (&stor_device->num_outstanding_req) && stor_device->drain_notify)@@ -1071,21 +1067,19 @@ static void storvsc_on_io_completion(struct hv_device *device, } -static void storvsc_on_receive (struct hv_device *device, +static void storvsc_on_receive (struct storvsc_device *stor_device,struct vstor_packet *vstor_packet,struct storvsc_cmd_request *request) {struct storvsc_scan_work *work; -struct storvsc_device *stor_device;switch (vstor_packet->operation) {case VSTOR_OPERATION_COMPLETE_IO : -storvsc_on_io_completion (device, vstor_packet, request); +storvsc_on_io_completion (stor_device, vstor_packet, request);break ;case VSTOR_OPERATION_REMOVE_DEVICE :case VSTOR_OPERATION_ENUMERATE_BUS : - stor_device =get_in_stor_device (device); work =kmalloc (sizeof (struct storvsc_scan_work ),GFP_ATOMIC );if (!work)return ;@@ -1096,7 +1090,6 @@ static void storvsc_on_receive(struct hv_device *device,break ;case VSTOR_OPERATION_FCHBA_DATA : - stor_device =get_in_stor_device (device);cache_wwn (stor_device, vstor_packet);fc_host_node_name (stor_device->host) = stor_device->node_name;fc_host_port_name (stor_device->host) = stor_device->port_name;@@ -1144,7 +1137,7 @@ static void storvsc_on_channel_callback(void *context) vmscsi_size_delta));complete (&request->wait_event); }else { -storvsc_on_receive (device, +storvsc_on_receive (stor_device, (struct vstor_packet *)packet, request); }Signature · 6 lines
1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 6 lines
Johannes Thumshirn Storage [email protected] +49 911 74053 689 SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) Key fingerprint = EC38 9CAB C2C4 F25D 8600 D0D0 0393 969D 2D76 0850
Re: [PATCH 1/4] scsi: storvsc: Fix a bug in the layout of the hv_fc_wwn_packet
In reply to K. Y. SrinivasanQuoted 33 lines · K. Y. Srinivasan
The
hv_fc_wwn_packetis exchanged over vmbus. Make the definition in Linux match the Window's definition.Signed-off-by K. Y. Srinivasan <[email protected]>Reviewed-by Long Li <[email protected]>Tested-by Alex Ng <[email protected]>--- drivers/scsi/storvsc_drv.c | 5 ++--- 1 files changed, 2 insertions(+), 3 deletions(-)drivers/scsi/storvsc_drv.c +2
-3@@ -92,9 +92,8 @@ enum vstor_packet_operation {*/ struct hv_fc_wwn_packet { -bool primary_active; -u8 reserved1; -u8 reserved2; +u8 primary_active; +u8 reserved1[3 ];u8 primary_port_wwn[8 ];u8 primary_node_wwn[8 ];u8 secondary_port_wwn[8 ];Signature · 6 lines
1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Should this go through stable as well?
If yes:
Signature · 6 lines
Johannes Thumshirn Storage [email protected] +49 911 74053 689 SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) Key fingerprint = EC38 9CAB C2C4 F25D 8600 D0D0 0393 969D 2D76 0850
RE: [PATCH 1/4] scsi: storvsc: Fix a bug in the layout of the hv_fc_wwn_packet
Quoted 55 lines
-----Original Message-----
From: Johannes Thumshirn [mailto:[email protected]]
Sent: Friday, December 11, 2015 12:48 AM
To: KY Srinivasan <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]
Subject: Re: [PATCH 1/4] scsi: storvsc: Fix a bug in the layout of thehv_fc_wwn_packetQuoted 1 line · K. Y. Srinivasan
The
hv_fc_wwn_packetis exchanged over vmbus. Make the definition inLinux match
Quoted 28 lines
the Window's definition.
Signed-off-by K. Y. Srinivasan <[email protected]>Reviewed-by Long Li <[email protected]>Tested-by Alex Ng <[email protected]>--- drivers/scsi/storvsc_drv.c | 5 ++--- 1 files changed, 2 insertions(+), 3 deletions(-)drivers/scsi/storvsc_drv.c +2
-4@@ -92,9 +92,8 @@ enum vstor_packet_operation {*/ struct hv_fc_wwn_packet { -bool primary_active; -u8 reserved1; -u8 reserved2; +u8 primary_active; +u8 reserved1[3 ];u8 primary_port_wwn[8 ];u8 primary_node_wwn[8 ];u8 secondary_port_wwn[8 ]; --1.7.4.1
Quoted 4 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected]
More majordomo info athttps://na01.safelinks.protection.outlook.com/?url=http%3a%2f%2fvger.ker
nel.org%2fmajordomo- info.html&data=01%7c01%7ckys%40microsoft.com%7cb6c3be0d1b474ac1374 908d30207c170%7c72f988bf86f141af91ab2d7cd011db47%7c1&sdata=7hfMcn qW32KiJgr7JkXsC4P0CnnQvAearwu7LzyWaqM%3d
Quoted 4 lines
Should this go through stable as well?
If yes:Fixes 8b612fa23 '[SCSI] storvsc: Update the storage protocol to win8 level'Cc [email protected] # v3.11+
This is the first time we are using this data structure and so I don't think we need to port it back to stable.
Regards,
K. Y
Quoted 9 lines
Reviewed-by Johannes Thumshirn <[email protected]>--
Johannes Thumshirn Storage
[email protected] +49 911 74053 689
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
Key fingerprint = EC38 9CAB C2C4 F25D 8600 D0D0 0393 969D 2D76 0850