DPCD Backlight Control
Subsystems (3)
cover DPCD Backlight Control
These patches add support for Backlight Control using DPCD registers on eDP displays.
Yetunde Adebisi (2):
drm/dp: Add definition for Display Control DPCD Registers capability
size
drm/i915: Add Backlight Control using DPCD for eDP connectors (v4)
drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/intel_dp.c | 17 ++- drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 181 ++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_drv.h | 6 + drivers/gpu/drm/i915/intel_panel.c | 4 + include/drm/drm_dp_helper.h | 1 + 6 files changed, 204 insertions(+), 6 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_dp_aux_backlight.c
Signature · 6 lines
1.9.3 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 1/2 drm/dp: Add definition for Display Control DPCD Registers capability size
This is used when reading Display Control capability Registers on the sink device.
--- include/drm/drm_dp_helper.h | 1 + 1 file changed, 1 insertion(+)
include/drm/drm_dp_helper.h +1 -0
@@ -621,6 +621,7 @@ u8 drm_dp_get_adjust_request_pre_emphasis(const u8 link_status[DP_LINK_STATUS_SI#define DP_BRANCH_OUI_HEADER_SIZE 0xc#define DP_RECEIVER_CAP_SIZE 0xf#define EDP_PSR_RECEIVER_CAP_SIZE 2 +#define EDP_DISPLAY_CTL_CAP_SIZE 3void drm_dp_link_train_clock_recovery_delay (const u8 dpcd[DP_RECEIVER_CAP_SIZE ]);void drm_dp_link_train_channel_eq_delay (const u8 dpcd[DP_RECEIVER_CAP_SIZE ]);
Signature · 6 lines
1.9.3 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/2 drm/i915: Add Backlight Control using DPCD for eDP connectors (v4)
In reply to Yetunde AdebisiThis patch adds support for eDP backlight control using DPCD registers to backlight hooks in intel_panel.
It checks for backlight control over AUX channel capability and sets up function pointers to get and set the backlight brightness level if supported.
v2: Moved backlight functions from intel_dp.c into a new file intel_dp_aux_backlight.c. Also moved reading of eDP display control registers to intel_dp_get_dpcd
v3: Correct some formatting mistakes
v4: Updated to use AUX backlight control if PWM control is not possible
(Jani)
This patch depends on http://patchwork.freedesktop.org/patch/64253/
--- drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/intel_dp.c | 17 ++- drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 181 ++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_drv.h | 6 + drivers/gpu/drm/i915/intel_panel.c | 4 + 5 files changed, 203 insertions(+), 6 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_dp_aux_backlight.c
drivers/gpu/drm/i915/Makefile +1 -0
@@ -77,6 +77,7 @@ i915-y += dvo_ch7017.o \ dvo_tfp410.o \ intel_crt.o \ intel_ddi.o \ + intel_dp_aux_backlight.o \ intel_dp_link_training.o \ intel_dp_mst.o \ intel_dp.o \
drivers/gpu/drm/i915/intel_dp.c +11 -6
@@ -3188,7 +3188,7 @@ static void chv_dp_post_pll_disable(struct intel_encoder *encoder)* Sinks are *supposed* to come up within 1ms from an off state, but we're also * supposed to retry 3 times per the spec. */ -static ssize_t +ssize_t intel_dp_dpcd_read_wake (struct drm_dp_aux *aux,unsigned int offset,void *buffer,size_t size) {
@@ -3855,7 +3855,6 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)struct intel_digital_port *dig_port =dp_to_dig_port (intel_dp);struct drm_device *dev = dig_port->base.base.dev;struct drm_i915_private *dev_priv = dev->dev_private; -uint8_t rev;if (intel_dp_dpcd_read_wake (&intel_dp->aux,0x000 , intel_dp->dpcd,sizeof (intel_dp->dpcd)) <0 )
@@ -3891,6 +3890,15 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)DRM_DEBUG_KMS ("PSR2 %s on sink" , dev_priv->psr.psr2_support ?"supported" :"not supported" ); } + +/* Read the eDP Display control capabilities registers */ +memset (intel_dp->edp_dpcd,0 ,sizeof (intel_dp->edp_dpcd)); +if ((intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP ] &DP_DPCD_DISPLAY_CONTROL_CAPABLE ) && + (intel_dp_dpcd_read_wake (&intel_dp->aux,DP_EDP_DPCD_REV , + intel_dp->edp_dpcd,sizeof (intel_dp->edp_dpcd)) == +sizeof (intel_dp->edp_dpcd))) +DRM_DEBUG_KMS ("EDP DPCD : %*ph\n" , (int )sizeof (intel_dp->edp_dpcd), + intel_dp->edp_dpcd); } DRM_DEBUG_KMS("Display Port TPS3 support: source %s, sink %s\n",
@@ -3898,10 +3906,7 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp) yesno(drm_dp_tps3_supported(intel_dp->dpcd)));/* Intermediate frequency support */ -if (is_edp (intel_dp) && - (intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP ] &DP_DPCD_DISPLAY_CONTROL_CAPABLE ) && - (intel_dp_dpcd_read_wake (&intel_dp->aux,DP_EDP_DPCD_REV , &rev,1 ) ==1 ) && - (rev >=0x03 )) {/* eDp v1.4 or higher */ +if (is_edp (intel_dp) && (intel_dp->edp_dpcd[0 ] >=0x03 )) {/* eDp v1.4 or higher */ __le16 sink_rates[DP_MAX_SUPPORTED_RATES ];int i;
drivers/gpu/drm/i915/intel_dp_aux_backlight.c new file +181 -0
181 lines not on this page · raw message
drivers/gpu/drm/i915/intel_drv.h +6 -0
@@ -753,6 +753,7 @@ struct intel_dp {uint8_t dpcd[DP_RECEIVER_CAP_SIZE ];uint8_t psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE ];uint8_t downstream_ports[DP_MAX_DOWNSTREAM_PORTS ]; +uint8_t edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE ];/* sink rates as reported by DP_SUPPORTED_LINK_RATES */ uint8_t num_sink_rates;int sink_rates[DP_MAX_SUPPORTED_RATES ];
@@ -1279,6 +1280,11 @@ void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock,bool intel_dp_source_supports_hbr2 (struct intel_dp *intel_dp);bool intel_dp_get_link_status (struct intel_dp *intel_dp,uint8_t link_status[DP_LINK_STATUS_SIZE ]); +ssize_t intel_dp_dpcd_read_wake (struct drm_dp_aux *aux,unsigned int offset, +void *buffer,size_t size); + +/* intel_dp_aux_backlight.c */ +int intel_dp_aux_init_backlight_funcs (struct intel_connector *intel_connector);/* intel_dp_mst.c */ int intel_dp_mst_encoder_init (struct intel_digital_port *intel_dig_port,int conn_id);
drivers/gpu/drm/i915/intel_panel.c +4 -0
@@ -1760,6 +1760,10 @@ intel_panel_init_backlight_funcs(struct intel_panel *panel)struct drm_device *dev = intel_connector->base.dev;struct drm_i915_private *dev_priv = dev->dev_private; +if (intel_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP && +intel_dp_aux_init_backlight_funcs (intel_connector) ==0 ) +return ; +if (IS_BROXTON (dev)) { panel->backlight.setup = bxt_setup_backlight; panel->backlight.enable = bxt_enable_backlight;
Signature · 6 lines
1.9.3 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915: Add Backlight Control using DPCD for eDP connectors (v4)
Quoted 14 lines · Yetunde Adebisi
This patch adds support for eDP backlight control using DPCD registers to backlight hooks in
intel_panel.It checks for backlight control over AUX channel capability and sets up function pointers to get and set the backlight brightness level if supported.
v2: Moved backlight functions from
intel_dp.cinto a new fileintel_dp_aux_backlight.c. Also moved reading of eDP display control registers tointel_dp_get_dpcdv3: Correct some formatting mistakes
v4: Updated to use AUX backlight control if PWM control is not possible
Quoted 8 lines
(Jani)This patch depends on http://patchwork.freedesktop.org/patch/64253/
Cc Bob Paauwe <[email protected]>Cc Jani Nikula <[email protected]>Acked-by Jesse Barnes <[email protected]>Signed-off-by Yetunde Adebisi <[email protected]>
Please accept my apologies for taking so long to review the updated patches.
This is starting to look good. There are a couple of small changes still needed, please find the comments inline.
BR,
Jani.
Quoted 220 lines
--- drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/intel_dp.c | 17 ++- drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 181 ++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_drv.h | 6 + drivers/gpu/drm/i915/intel_panel.c | 4 + 5 files changed, 203 insertions(+), 6 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_dp_aux_backlight.cdrivers/gpu/drm/i915/Makefile +1
-0@@ -77,6 +77,7 @@ i915-y += dvo_ch7017.o \ dvo_tfp410.o \ intel_crt.o \ intel_ddi.o \ + intel_dp_aux_backlight.o \ intel_dp_link_training.o \ intel_dp_mst.o \ intel_dp.o \drivers/gpu/drm/i915/intel_dp.c +11
-6@@ -3188,7 +3188,7 @@ static void chv_dp_post_pll_disable(struct intel_encoder *encoder)* Sinks are *supposed* to come up within 1ms from an off state, but we're also * supposed to retry 3 times per the spec. */ -static ssize_t +ssize_t intel_dp_dpcd_read_wake (struct drm_dp_aux *aux,unsigned int offset,void *buffer,size_t size) {@@ -3855,7 +3855,6 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)struct intel_digital_port *dig_port =dp_to_dig_port (intel_dp);struct drm_device *dev = dig_port->base.base.dev;struct drm_i915_private *dev_priv = dev->dev_private; -uint8_t rev;if (intel_dp_dpcd_read_wake (&intel_dp->aux,0x000 , intel_dp->dpcd,sizeof (intel_dp->dpcd)) <0 )@@ -3891,6 +3890,15 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)DRM_DEBUG_KMS ("PSR2 %s on sink" , dev_priv->psr.psr2_support ?"supported" :"not supported" ); } + +/* Read the eDP Display control capabilities registers */ +memset (intel_dp->edp_dpcd,0 ,sizeof (intel_dp->edp_dpcd)); +if ((intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP ] &DP_DPCD_DISPLAY_CONTROL_CAPABLE ) && + (intel_dp_dpcd_read_wake (&intel_dp->aux,DP_EDP_DPCD_REV , + intel_dp->edp_dpcd,sizeof (intel_dp->edp_dpcd)) == +sizeof (intel_dp->edp_dpcd))) +DRM_DEBUG_KMS ("EDP DPCD : %*ph\n" , (int )sizeof (intel_dp->edp_dpcd), + intel_dp->edp_dpcd); } DRM_DEBUG_KMS("Display Port TPS3 support: source %s, sink %s\n",@@ -3898,10 +3906,7 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp) yesno(drm_dp_tps3_supported(intel_dp->dpcd)));/* Intermediate frequency support */ -if (is_edp (intel_dp) && - (intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP ] &DP_DPCD_DISPLAY_CONTROL_CAPABLE ) && - (intel_dp_dpcd_read_wake (&intel_dp->aux,DP_EDP_DPCD_REV , &rev,1 ) ==1 ) && - (rev >=0x03 )) {/* eDp v1.4 or higher */ +if (is_edp (intel_dp) && (intel_dp->edp_dpcd[0 ] >=0x03 )) {/* eDp v1.4 or higher */ __le16 sink_rates[DP_MAX_SUPPORTED_RATES ];int i;drivers/gpu/drm/i915/intel_dp_aux_backlight.c new file +144
-0@@ -0,0 +1,181 @@ +/* +* Copyright © 2015 Intel Corporation +* +* Permission is hereby granted, free of charge, to any person obtaining a +* copy of this software and associated documentation files (the "Software"), +* to deal in the Software without restriction, including without limitation +* the rights to use, copy, modify, merge, publish, distribute, sublicense, +* and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice (including the next +* paragraph) shall be included in all copies or substantial portions of the +* Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS +* IN THE SOFTWARE. +* +*/ + +#include "intel_drv.h" + +static bool is_aux_backlight_enabled (struct drm_dp_aux *aux) +{ +uint8_t read_val =0 ; + +if (intel_dp_dpcd_read_wake (aux,DP_EDP_DISPLAY_CONTROL_REGISTER , + &read_val,sizeof (read_val)) <0 ) +DRM_DEBUG_KMS ("Failed to read DPCD register 0x%x\n" , +DP_EDP_DISPLAY_CONTROL_REGISTER ); + +return read_val &DP_EDP_BACKLIGHT_ENABLE ; +} + +static void set_aux_backlight_enable (struct intel_dp *intel_dp,bool enable) +{ +uint8_t reg_val =0 ; + +if (intel_dp_dpcd_read_wake (&intel_dp->aux, +DP_EDP_DISPLAY_CONTROL_REGISTER , + ®_val,sizeof (reg_val)) <0 ) { +DRM_DEBUG_KMS ("Failed to read DPCD register 0x%x\n" , +DP_EDP_DISPLAY_CONTROL_REGISTER ); +return ; + } +if (enable) + reg_val |=DP_EDP_BACKLIGHT_ENABLE ; +else + reg_val &= ~(DP_EDP_BACKLIGHT_ENABLE ); + +if (drm_dp_dpcd_writeb (&intel_dp->aux,DP_EDP_DISPLAY_CONTROL_REGISTER , + reg_val) <0 ) { +DRM_DEBUG_KMS ("Failed to %s aux backlight\n" , + enable ?"enable" :"disable" ); + } +} + +/* +* Read the current backlight value from DPCD register(s) based +* on if 8-bit(MSB) or 16-bit(MSB and LSB) values are supported +*/ +static uint32_t intel_dp_aux_get_backlight (struct intel_connector *connector) +{ +struct intel_dp *intel_dp =enc_to_intel_dp (&connector->encoder->base); +uint8_t read_val[2 ] = {0x0 }; +uint16_t level =0 ; + +if (intel_dp_dpcd_read_wake (&intel_dp->aux, +DP_EDP_BACKLIGHT_BRIGHTNESS_MSB , + &read_val,sizeof (read_val)) <0 ) { +DRM_DEBUG_KMS ("Failed to read DPCD register 0x%x\n" , +DP_EDP_BACKLIGHT_BRIGHTNESS_MSB ); +return 0 ; + } + level = read_val[0 ]; +if (intel_dp->edp_dpcd[2 ] &DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT ) + level = (read_val[0 ] <<8 | read_val[1 ]); + +return level; +} + +/* +* Sends the current backlight level over the aux channel, checking if its using +* 8-bit or 16 bit value (MSB and LSB) +*/ +static void +intel_dp_aux_set_backlight (struct intel_connector *connector,u32 level) +{ +struct intel_dp *intel_dp =enc_to_intel_dp (&connector->encoder->base); +uint8_t vals[2 ] = {0x0 }; + + vals[0 ] = level; + +/* Write the MSB and/or LSB */ +if (intel_dp->edp_dpcd[2 ] &DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT ) { + vals[0 ] = (level &0xFF00 ) >>8 ; + vals[1 ] = (level &0xFF ); + } +if (drm_dp_dpcd_write (&intel_dp->aux,DP_EDP_BACKLIGHT_BRIGHTNESS_MSB , + vals,sizeof (vals)) <0 ) { +DRM_DEBUG_KMS ("Failed to write aux backlight level\n" ); +return ; + } +} + +static void intel_dp_aux_enable_backlight (struct intel_connector *connector) +{ +set_aux_backlight_enable (enc_to_intel_dp (&connector->encoder->base), true); +} + +static void intel_dp_aux_disable_backlight (struct intel_connector *connector) +{ +set_aux_backlight_enable (enc_to_intel_dp (&connector->encoder->base), false); +} + +static int intel_dp_aux_setup_backlight (struct intel_connector *connector, +enum pipe pipe) +{ +struct intel_dp *intel_dp =enc_to_intel_dp (&connector->encoder->base); +struct intel_panel *panel = &connector->panel; + +if (intel_dp->edp_dpcd[2 ] &DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT ) + panel->backlight.max =0xFFFF ; +else + panel->backlight.max =0xFF ; + + panel->backlight.min =0 ; + + panel->backlight.level =intel_dp_aux_get_backlight (connector); + panel->backlight.enabled =is_aux_backlight_enabled (&intel_dp->aux); + +return 0 ; +} + +static bool +intel_dp_aux_display_control_capable (struct intel_connector *connector) +{ +struct intel_dp *intel_dp =enc_to_intel_dp (&connector->encoder->base); +uint8_t dpcd_buf =0 ; +
drivers/gpu/drm/i915/intel_dp_aux_backlight.c line 154
Quoted 10 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c new file +10
-0+/* Check the eDP Display control capabilities registers to determine if +* the panel can support backlight control over the aux channel +*/ + +if (intel_dp->edp_dpcd[1 ] &DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP && + (intel_dp->edp_dpcd[1 ] &DP_EDP_BACKLIGHT_AUX_ENABLE_CAP ) && + !(intel_dp->edp_dpcd[2 ] &DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP )) { + +DRM_DEBUG_KMS ("AUX Backlight Control Supported!\n" ); +set_aux_backlight_enable (intel_dp, true);
This function is used for querying capabilities. It should not enable the backlight. I think we could probably enable the backlight at intel_dp_aux_setup_backlight(). Then it would not need to call is_aux_backlight_enabled() either.
drivers/gpu/drm/i915/intel_dp_aux_backlight.c line 160
Quoted 6 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c new file +6
-0+if ((intel_dp_dpcd_read_wake (&intel_dp->aux, +DP_EDP_BACKLIGHT_MODE_SET_REGISTER , &dpcd_buf,1 ) ==1 ) && + ((dpcd_buf &DP_EDP_BACKLIGHT_CONTROL_MODE_MASK ) == +DP_EDP_BACKLIGHT_CONTROL_MODE_PRESET )) +drm_dp_dpcd_writeb (&intel_dp->aux,DP_EDP_BACKLIGHT_MODE_SET_REGISTER , + (dpcd_buf |DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD ));
This read/write does not belong to this function either. In fact, this should be done at intel_dp_aux_enable_backlight(), because the display may have been powered down in between, and the power on defaults would be in effect.
You also need to do this in intel_dp_aux_setup_backlight(), so better call intel_dp_aux_enable_backlight() rather than set_aux_backlight_enable() there.
Quoted 50 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c new file +21
-0+ +return true; + } +return false; +} + +int intel_dp_aux_init_backlight_funcs (struct intel_connector *intel_connector) +{ +struct intel_panel *panel = &intel_connector->panel; + +if (!intel_dp_aux_display_control_capable (intel_connector)) +return -ENODEV ; + + panel->backlight.setup = intel_dp_aux_setup_backlight; + panel->backlight.enable = intel_dp_aux_enable_backlight; + panel->backlight.disable = intel_dp_aux_disable_backlight; + panel->backlight.set = intel_dp_aux_set_backlight; + panel->backlight.get = intel_dp_aux_get_backlight; + +return 0 ; +}drivers/gpu/drm/i915/intel_drv.h +6
-0@@ -753,6 +753,7 @@ struct intel_dp {uint8_t dpcd[DP_RECEIVER_CAP_SIZE ];uint8_t psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE ];uint8_t downstream_ports[DP_MAX_DOWNSTREAM_PORTS ]; +uint8_t edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE ];/* sink rates as reported by DP_SUPPORTED_LINK_RATES */ uint8_t num_sink_rates;int sink_rates[DP_MAX_SUPPORTED_RATES ];@@ -1279,6 +1280,11 @@ void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock,bool intel_dp_source_supports_hbr2 (struct intel_dp *intel_dp);bool intel_dp_get_link_status (struct intel_dp *intel_dp,uint8_t link_status[DP_LINK_STATUS_SIZE ]); +ssize_t intel_dp_dpcd_read_wake (struct drm_dp_aux *aux,unsigned int offset, +void *buffer,size_t size); + +/* intel_dp_aux_backlight.c */ +int intel_dp_aux_init_backlight_funcs (struct intel_connector *intel_connector);/* intel_dp_mst.c */ int intel_dp_mst_encoder_init (struct intel_digital_port *intel_dig_port,int conn_id);drivers/gpu/drm/i915/intel_panel.c +0
-0
drivers/gpu/drm/i915/intel_panel.c intel_panel_init_backlight_funcs(struct intel_panel *panel) · line 1766
Quoted 7 lines
drivers/gpu/drm/i915/intel_panel.c +4
-0@@ -1760,6 +1760,10 @@ intel_panel_init_backlight_funcs(struct intel_panel *panel)struct drm_device *dev = intel_connector->base.dev;struct drm_i915_private *dev_priv = dev->dev_private; +if (intel_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP && +intel_dp_aux_init_backlight_funcs (intel_connector) ==0 ) +return ; +
The context has changed, and this hunk no longer applies cleanly.
Quoted 3 lines
drivers/gpu/drm/i915/intel_panel.c +0
-0if (IS_BROXTON (dev)) { panel->backlight.setup = bxt_setup_backlight; panel->backlight.enable = bxt_enable_backlight;
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hi,
Can someone please help review this patch series from December.
https://patchwork.freedesktop.org/series/1864/
Thank you.
Yetunde
Quoted 23 lines
-----Original Message-----
From: Adebisi, YetundeX
Sent: Wednesday, December 16, 2015 12:07 PM
To: [email protected]
Cc: Adebisi, YetundeX
Subject: [PATCH 0/2] DPCD Backlight ControlThese patches add support for Backlight Control using DPCD registers on eDP displays.
Yetunde Adebisi (2):
drm/dp: Add definition for Display Control DPCD Registers capability
size
drm/i915: Add Backlight Control using DPCD for eDP connectors (v4)drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/intel_dp.c | 17 ++- drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 181 ++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_drv.h | 6 + drivers/gpu/drm/i915/intel_panel.c | 4 + include/drm/drm_dp_helper.h | 1 + 6 files changed, 204 insertions(+), 6 deletions(-) create mode 100644
Quoted 4 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c--
1.9.3
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx