Direct userspace dma-buf mmap (v7)
Subsystems (9)
Hey back,
Thank you Daniel, Chris, Alex and Thomas for reviewing the last series. I think I addressed most of the comments now in version 7, including:
- being even more wording in the doc about sync usage.
- pass .write = false always in i915 end_cpu_access.
- add sync invalid flags test (igt).
- in kms_mmap_write_crc, use CPU hog and testing rounds to catch the sync problems (igt).
Here are the trees:
https://github.com/tiagovignatti/drm-intel/commits/drm-intel-nightly_dma-buf-mmap-v7
https://github.com/tiagovignatti/intel-gpu-tools/commits/dma-buf-mmap-v7
Also, Chrome OS side is in progress. This past week I've been mostly struggling with fail attempts to build it (boots and goes to a black screen. Sigh.) and also finding a way to make my funky BayTrail-T laptop with 32-bit UEFI firmware boot up (success with Ubuntu but no success yet in CrOS). A WIP of Chromium changes can be seen here anyways:
https://codereview.chromium.org/1262043002/
Happy Holidays!
Tiago
Signature · 6 lines
2.1.4 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v7 1/5 drm: prime: Honour O_RDWR during prime-handle-to-fd
From: Daniel Thompson <[email protected]>
Currently DRM_IOCTL_PRIME_HANDLE_TO_FD rejects all flags except (DRM|O)_CLOEXEC making it difficult (maybe impossible) for userspace to mmap() the resulting dma-buf even when this is supported by the DRM driver.
It is trivial to relax the restriction and permit read/write access. This is safe because the flags are seldom touched by drm; mostly they are passed verbatim to dma_buf calls.
v3 (Tiago): removed unused flags variable from drm_prime_handle_to_fd_ioctl.
--- drivers/gpu/drm/drm_prime.c | 10 +++------- include/uapi/drm/drm.h | 1 + 2 files changed, 4 insertions(+), 7 deletions(-)
drivers/gpu/drm/drm_prime.c +3 -7
@@ -329,7 +329,7 @@ static const struct dma_buf_ops drm_gem_prime_dmabuf_ops = {* drm_gem_prime_export - helper library implementation of the export callback * @dev: drm_device to export from * @obj: GEM object to export -* @flags: flags like DRM_CLOEXEC +* @flags: flags like DRM_CLOEXEC and DRM_RDWR * * This is the implementation of the gem_prime_export functions for GEM drivers * using the PRIME helpers.
@@ -628,7 +628,6 @@ int drm_prime_handle_to_fd_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) {struct drm_prime_handle *args = data; -uint32_t flags;if (!drm_core_check_feature (dev,DRIVER_PRIME ))return -EINVAL ;
@@ -637,14 +636,11 @@ int drm_prime_handle_to_fd_ioctl(struct drm_device *dev, void *data,return -ENOSYS ;/* check flags are valid */ -if (args->flags & ~DRM_CLOEXEC ) +if (args->flags & ~(DRM_CLOEXEC |DRM_RDWR ))return -EINVAL ; -/* we only want to pass DRM_CLOEXEC which is == O_CLOEXEC */ - flags = args->flags &DRM_CLOEXEC ; -return dev->driver->prime_handle_to_fd (dev, file_priv, - args->handle, flags, &args->fd); + args->handle, args->flags, &args->fd); } int drm_prime_fd_to_handle_ioctl(struct drm_device *dev, void *data,
include/uapi/drm/drm.h +1 -0
@@ -669,6 +669,7 @@ struct drm_set_client_cap {__u64 value; }; +#define DRM_RDWR O_RDWR#define DRM_CLOEXEC O_CLOEXECstruct drm_prime_handle {__u32 handle;
Signature · 6 lines
2.1.4 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v7 2/5 dma-buf: Remove range-based flush
In reply to Tiago VignattiThis patch removes range-based information used for optimizations in begin_cpu_access and end_cpu_access.
We don't have any user nor implementation using range-based flush. It seems a consensus that if we ever want something like that again (or even more robust using 2D, 3D sub-range regions) we can use the upcoming dma-buf sync ioctl for such.
--- Documentation/dma-buf-sharing.txt | 19 ++++++++----------- drivers/dma-buf/dma-buf.c | 13 ++++--------- drivers/gpu/drm/i915/i915_gem_dmabuf.c | 2 +- drivers/gpu/drm/omapdrm/omap_gem_dmabuf.c | 4 ++-- drivers/gpu/drm/udl/udl_fb.c | 2 -- drivers/staging/android/ion/ion.c | 6 ++---- drivers/staging/android/ion/ion_test.c | 4 ++-- include/linux/dma-buf.h | 12 +++++------- 8 files changed, 24 insertions(+), 38 deletions(-)
Documentation/dma-buf-sharing.txt +8 -11
@@ -257,17 +257,15 @@ Access to a dma_buf from the kernel context involves three steps: Interface: int dma_buf_begin_cpu_access(struct dma_buf *dmabuf, - size_t start, size_t len, enum dma_data_direction direction) This allows the exporter to ensure that the memory is actually available for cpu access - the exporter might need to allocate or swap-in and pin the backing storage. The exporter also needs to ensure that cpu access is - coherent for the given range and access direction. The range and access - direction can be used by the exporter to optimize the cache flushing, i.e. - access outside of the range or with a different direction (read instead of - write) might return stale or even bogus data (e.g. when the exporter needs to - copy the data to temporary storage). + coherent for the access direction. The direction can be used by the exporter + to optimize the cache flushing, i.e. access with a different direction (read + instead of write) might return stale or even bogus data (e.g. when the + exporter needs to copy the data to temporary storage). This step might fail, e.g. in oom conditions.
@@ -322,14 +320,13 @@ Access to a dma_buf from the kernel context involves three steps: 3. Finish access - When the importer is done accessing the range specified in begin_cpu_access, - it needs to announce this to the exporter (to facilitate cache flushing and - unpinning of any pinned resources). The result of any dma_buf kmap calls - after end_cpu_access is undefined. + When the importer is done accessing the CPU, it needs to announce this to + the exporter (to facilitate cache flushing and unpinning of any pinned + resources). The result of any dma_buf kmap calls after end_cpu_access is + undefined. Interface: void dma_buf_end_cpu_access(struct dma_buf *dma_buf, - size_t start, size_t len, enum dma_data_direction dir);
drivers/dma-buf/dma-buf.c +4 -9
@@ -539,13 +539,11 @@ EXPORT_SYMBOL_GPL(dma_buf_unmap_attachment);* preparations. Coherency is only guaranteed in the specified range for the * specified access direction. * @dmabuf: [in] buffer to prepare cpu access for. -* @start: [in] start of range for cpu access. -* @len: [in] length of range for cpu access. * @direction: [in] length of range for cpu access. * * Can return negative error values, returns 0 on success. */ -int dma_buf_begin_cpu_access (struct dma_buf *dmabuf,size_t start,size_t len, +int dma_buf_begin_cpu_access (struct dma_buf *dmabuf,enum dma_data_direction direction) {int ret =0 ;
@@ -554,8 +552,7 @@ int dma_buf_begin_cpu_access(struct dma_buf *dmabuf, size_t start, size_t len,return -EINVAL ;if (dmabuf->ops->begin_cpu_access) - ret = dmabuf->ops->begin_cpu_access (dmabuf, start, - len, direction); + ret = dmabuf->ops->begin_cpu_access (dmabuf, direction);return ret; }
@@ -567,19 +564,17 @@ EXPORT_SYMBOL_GPL(dma_buf_begin_cpu_access);* actions. Coherency is only guaranteed in the specified range for the * specified access direction. * @dmabuf: [in] buffer to complete cpu access for. -* @start: [in] start of range for cpu access. -* @len: [in] length of range for cpu access. * @direction: [in] length of range for cpu access. * * This call must always succeed. */ -void dma_buf_end_cpu_access (struct dma_buf *dmabuf,size_t start,size_t len, +void dma_buf_end_cpu_access (struct dma_buf *dmabuf,enum dma_data_direction direction) {WARN_ON (!dmabuf);if (dmabuf->ops->end_cpu_access) - dmabuf->ops->end_cpu_access (dmabuf, start, len, direction); + dmabuf->ops->end_cpu_access (dmabuf, direction); }EXPORT_SYMBOL_GPL (dma_buf_end_cpu_access);
drivers/gpu/drm/i915/i915_gem_dmabuf.c +1 -1
@@ -196,7 +196,7 @@ static int i915_gem_dmabuf_mmap(struct dma_buf *dma_buf, struct vm_area_struct *return -EINVAL ; } -static int i915_gem_begin_cpu_access (struct dma_buf *dma_buf,size_t start,size_t length,enum dma_data_direction direction) +static int i915_gem_begin_cpu_access (struct dma_buf *dma_buf,enum dma_data_direction direction) {struct drm_i915_gem_object *obj =dma_buf_to_obj (dma_buf);struct drm_device *dev = obj->base.dev;
drivers/gpu/drm/omapdrm/omap_gem_dmabuf.c +2 -2
@@ -79,7 +79,7 @@ static void omap_gem_dmabuf_release(struct dma_buf *buffer)static int omap_gem_dmabuf_begin_cpu_access (struct dma_buf *buffer, -size_t start,size_t len,enum dma_data_direction dir) +enum dma_data_direction dir) {struct drm_gem_object *obj = buffer->priv;struct page **pages;
@@ -94,7 +94,7 @@ static int omap_gem_dmabuf_begin_cpu_access(struct dma_buf *buffer, }static void omap_gem_dmabuf_end_cpu_access (struct dma_buf *buffer, -size_t start,size_t len,enum dma_data_direction dir) +enum dma_data_direction dir) {struct drm_gem_object *obj = buffer->priv;omap_gem_put_pages (obj);
drivers/gpu/drm/udl/udl_fb.c +0 -2
@@ -409,7 +409,6 @@ static int udl_user_framebuffer_dirty(struct drm_framebuffer *fb,if (ufb->obj->base.import_attach) { ret =dma_buf_begin_cpu_access (ufb->obj->base.import_attach->dmabuf, -0 , ufb->obj->base.size,DMA_FROM_DEVICE );if (ret) goto unlock;
@@ -425,7 +424,6 @@ static int udl_user_framebuffer_dirty(struct drm_framebuffer *fb,if (ufb->obj->base.import_attach) {dma_buf_end_cpu_access (ufb->obj->base.import_attach->dmabuf, -0 , ufb->obj->base.size,DMA_FROM_DEVICE ); }
drivers/staging/android/ion/ion.c +2 -4
@@ -1057,8 +1057,7 @@ static void ion_dma_buf_kunmap(struct dma_buf *dmabuf, unsigned long offset, { } -static int ion_dma_buf_begin_cpu_access (struct dma_buf *dmabuf,size_t start, -size_t len, +static int ion_dma_buf_begin_cpu_access (struct dma_buf *dmabuf,enum dma_data_direction direction) {struct ion_buffer *buffer = dmabuf->priv;
@@ -1076,8 +1075,7 @@ static int ion_dma_buf_begin_cpu_access(struct dma_buf *dmabuf, size_t start,return PTR_ERR_OR_ZERO (vaddr); } -static void ion_dma_buf_end_cpu_access (struct dma_buf *dmabuf,size_t start, -size_t len, +static void ion_dma_buf_end_cpu_access (struct dma_buf *dmabuf,enum dma_data_direction direction) {struct ion_buffer *buffer = dmabuf->priv;
drivers/staging/android/ion/ion_test.c +2 -2
@@ -109,7 +109,7 @@ static int ion_handle_test_kernel(struct dma_buf *dma_buf, void __user *ptr,if (offset > dma_buf->size || size > dma_buf->size - offset)return -EINVAL ; - ret =dma_buf_begin_cpu_access (dma_buf, offset, size, dir); + ret =dma_buf_begin_cpu_access (dma_buf, dir);if (ret)return ret;
@@ -139,7 +139,7 @@ static int ion_handle_test_kernel(struct dma_buf *dma_buf, void __user *ptr, copy_offset =0 ; } err: -dma_buf_end_cpu_access (dma_buf, offset, size, dir); +dma_buf_end_cpu_access (dma_buf, dir);return ret; }
include/linux/dma-buf.h +5 -7
@@ -54,7 +54,7 @@ struct dma_buf_attachment;* @release: release this buffer; to be called after the last dma_buf_put. * @begin_cpu_access: [optional] called before cpu access to invalidate cpu * caches and allocate backing storage (if not yet done) -* respectively pin the objet into memory. +* respectively pin the object into memory. * @end_cpu_access: [optional] called after cpu access to flush caches. * @kmap_atomic: maps a page from the buffer into kernel address * space, users may not block until the subsequent unmap call.
@@ -93,10 +93,8 @@ struct dma_buf_ops {/* after final dma_buf_put() */ void (*release)(struct dma_buf *); -int (*begin_cpu_access)(struct dma_buf *,size_t ,size_t , -enum dma_data_direction ); -void (*end_cpu_access)(struct dma_buf *,size_t ,size_t , -enum dma_data_direction ); +int (*begin_cpu_access)(struct dma_buf *,enum dma_data_direction ); +void (*end_cpu_access)(struct dma_buf *,enum dma_data_direction );void *(*kmap_atomic)(struct dma_buf *,unsigned long );void (*kunmap_atomic)(struct dma_buf *,unsigned long ,void *);void *(*kmap)(struct dma_buf *,unsigned long );
@@ -224,9 +222,9 @@ struct sg_table *dma_buf_map_attachment(struct dma_buf_attachment *, enum dma_data_direction);void dma_buf_unmap_attachment (struct dma_buf_attachment *,struct sg_table *,enum dma_data_direction ); -int dma_buf_begin_cpu_access (struct dma_buf *dma_buf,size_t start,size_t len, +int dma_buf_begin_cpu_access (struct dma_buf *dma_buf,enum dma_data_direction dir); -void dma_buf_end_cpu_access (struct dma_buf *dma_buf,size_t start,size_t len, +void dma_buf_end_cpu_access (struct dma_buf *dma_buf,enum dma_data_direction dir);void *dma_buf_kmap_atomic (struct dma_buf *,unsigned long );void dma_buf_kunmap_atomic (struct dma_buf *,unsigned long ,void *);
Signature · 6 lines
2.1.4 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v7 3/5 dma-buf: Add ioctls to allow userspace to flush
In reply to Tiago VignattiFrom: Daniel Vetter <[email protected]>
The userspace might need some sort of cache coherency management e.g. when CPU and GPU domains are being accessed through dma-buf at the same time. To circumvent this problem there are begin/end coherency markers, that forward directly to existing dma-buf device drivers vfunc hooks. Userspace can make use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence would be used like following:
- mmap dma-buf fd
- for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write to mmap area 3. SYNC_END ioctl. This can be repeated as often as you want (with the new data being consumed by the GPU or say scanout device)
- munmap once you don't need the buffer any more
v2 (Tiago): Fix header file type names (u64 -> __u64)
v3 (Tiago): Add documentation. Use enum dma_buf_sync_flags to the begin/end dma-buf functions. Check for overflows in start/length.
v4 (Tiago): use 2d regions for sync.
v5 (Tiago): forget about 2d regions (v4); use _IOW in DMA_BUF_IOCTL_SYNC and remove range information from struct dma_buf_sync.
v6 (Tiago): use __u64 structured padded flags instead enum. Adjust documentation about the recommendation on using sync ioctls.
v7 (Tiago): Alex' nit on flags definition and being even more wording in the doc about sync usage.
--- Documentation/dma-buf-sharing.txt | 21 ++++++++++++++++++- drivers/dma-buf/dma-buf.c | 43 +++++++++++++++++++++++++++++++++++++++ include/uapi/linux/dma-buf.h | 38 ++++++++++++++++++++++++++++++++++ 3 files changed, 101 insertions(+), 1 deletion(-) create mode 100644 include/uapi/linux/dma-buf.h
Documentation/dma-buf-sharing.txt +20 -1
@@ -350,7 +350,26 @@ Being able to mmap an export dma-buf buffer object has 2 main use-cases: handles, too). So it's beneficial to support this in a similar fashion on dma-buf to have a good transition path for existing Android userspace. - No special interfaces, userspace simply calls mmap on the dma-buf fd. + No special interfaces, userspace simply calls mmap on the dma-buf fd, making + sure that the cache synchronization ioctl (DMA_BUF_IOCTL_SYNC) is *always* + used when the access happens. This is discussed next paragraphs. + + Some systems might need some sort of cache coherency management e.g. when + CPU and GPU domains are being accessed through dma-buf at the same time. To + circumvent this problem there are begin/end coherency markers, that forward + directly to existing dma-buf device drivers vfunc hooks. Userspace can make + use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence + would be used like following: + - mmap dma-buf fd + - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write + to mmap area 3. SYNC_END ioctl. This can be repeated as often as you + want (with the new data being consumed by the GPU or say scanout device) + - munmap once you don't need the buffer any more + + Therefore, for correctness and optimal performance, systems with the memory + cache shared by the GPU and CPU i.e. the "coherent" and also the + "incoherent" are always required to use SYNC_START and SYNC_END before and + after, respectively, when accessing the mapped address. 2. Supporting existing mmap interfaces in importers
drivers/dma-buf/dma-buf.c +43 -0
60 lines not on this page · raw message
include/uapi/linux/dma-buf.h new file +38 -0
@@ -0,0 +1,38 @@ +/* +* Framework for buffer objects that can be shared across devices/subsystems. +* +* Copyright(C) 2015 Intel Ltd +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License version 2 as published by +* the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, but WITHOUT +* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +* more details. +* +* You should have received a copy of the GNU General Public License along with +* this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef _DMA_BUF_UAPI_H_ +#define _DMA_BUF_UAPI_H_ + +/* begin/end dma-buf functions used for userspace mmap. */ +struct dma_buf_sync { +__u64 flags; +}; + +#define DMA_BUF_SYNC_READ (1 << 0) +#define DMA_BUF_SYNC_WRITE (2 << 0) +#define DMA_BUF_SYNC_RW (DMA_BUF_SYNC_READ | DMA_BUF_SYNC_WRITE) +#define DMA_BUF_SYNC_START (0 << 2) +#define DMA_BUF_SYNC_END (1 << 2) +#define DMA_BUF_SYNC_VALID_FLAGS_MASK \ + (DMA_BUF_SYNC_RW | DMA_BUF_SYNC_END) + +#define DMA_BUF_BASE 'b' +#define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct dma_buf_sync) + +#endif
Signature · 6 lines
2.1.4 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v7 3/5] dma-buf: Add ioctls to allow userspace to flush
Hi
Quoted 85 lines · Tiago Vignatti
From: Daniel Vetter <[email protected]>
The userspace might need some sort of cache coherency management e.g. when CPU and GPU domains are being accessed through dma-buf at the same time. To circumvent this problem there are begin/end coherency markers, that forward directly to existing dma-buf device drivers vfunc hooks. Userspace can make use of those markers through the
DMA_BUF_IOCTL_SYNCioctl. The sequence would be used like following:
- mmap dma-buf fd
- for each drawing/upload cycle in CPU 1.SYNC_STARTioctl, 2. read/write to mmap area 3.SYNC_ENDioctl. This can be repeated as often as you want (with the new data being consumed by the GPU or say scanout device)
- munmap once you don't need the buffer any morev2 (Tiago): Fix header file type names (u64 ->
__u64)
v3 (Tiago): Add documentation. Use enumdma_buf_sync_flagsto the begin/end dma-buf functions. Check for overflows in start/length.
v4 (Tiago): use 2d regions for sync.
v5 (Tiago): forget about 2d regions (v4); use_IOWinDMA_BUF_IOCTL_SYNCand remove range information from structdma_buf_sync.
v6 (Tiago): use__u64structured padded flags instead enum. Adjust documentation about the recommendation on using sync ioctls.
v7 (Tiago): Alex' nit on flags definition and being even more wording in the doc about sync usage.Cc Sumit Semwal <[email protected]>Signed-off-by Daniel Vetter <[email protected]>Signed-off-by Tiago Vignatti <[email protected]>--- Documentation/dma-buf-sharing.txt | 21 ++++++++++++++++++- drivers/dma-buf/dma-buf.c | 43 +++++++++++++++++++++++++++++++++++++++ include/uapi/linux/dma-buf.h | 38 ++++++++++++++++++++++++++++++++++ 3 files changed, 101 insertions(+), 1 deletion(-) create mode 100644 include/uapi/linux/dma-buf.hDocumentation/dma-buf-sharing.txt +20
-1@@ -350,7 +350,26 @@ Being able to mmap an export dma-buf buffer object has 2 main use-cases: handles, too). So it's beneficial to support this in a similar fashion on dma-buf to have a good transition path for existing Android userspace. - No special interfaces, userspace simply calls mmap on the dma-buf fd. + No special interfaces, userspace simply calls mmap on the dma-buf fd, making + sure that the cache synchronization ioctl (DMA_BUF_IOCTL_SYNC) is *always* + used when the access happens. This is discussed next paragraphs. + + Some systems might need some sort of cache coherency management e.g. when + CPU and GPU domains are being accessed through dma-buf at the same time. To + circumvent this problem there are begin/end coherency markers, that forward + directly to existing dma-buf device drivers vfunc hooks. Userspace can make + use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence + would be used like following: + - mmap dma-buf fd + - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write + to mmap area 3. SYNC_END ioctl. This can be repeated as often as you + want (with the new data being consumed by the GPU or say scanout device) + - munmap once you don't need the buffer any more + + Therefore, for correctness and optimal performance, systems with the memory + cache shared by the GPU and CPU i.e. the "coherent" and also the + "incoherent" are always required to use SYNC_START and SYNC_END before and + after, respectively, when accessing the mapped address. 2. Supporting existing mmap interfaces in importersdrivers/dma-buf/dma-buf.c +3
-0@@ -34,6 +34,8 @@#include <linux/poll.h> #include <linux/reservation.h> +#include <uapi/linux/dma-buf.h> +static inline int is_dma_buf_file (struct file *);struct dma_buf_list {@@ -251,11 +253,52 @@ out:return events; } +static long dma_buf_ioctl(struct file *file,
drivers/dma-buf/dma-buf.c out: · line 266
Quoted 10 lines
drivers/dma-buf/dma-buf.c +10
-0+ unsigned int cmd, unsigned long arg) +{ +struct dma_buf *dmabuf; +struct dma_buf_sync sync; +enum dma_data_direction direction; + + dmabuf = file->private_data; + +if (!is_dma_buf_file (file)) +return -EINVAL ;
Why? This can never happen, and you better not use dma_buf_ioctl() outside of dma_buf_fops..
I guess it's simply copied from the other fop callbacks, but I don't see why. dma_buf_poll() doesn't do it, neither should this, or one of the other 3 callbacks.
Quoted 4 lines
drivers/dma-buf/dma-buf.c +4
-0+ +switch (cmd) { +case DMA_BUF_IOCTL_SYNC : +if (copy_from_user (&sync, (void __user *) arg,sizeof (sync)))
drivers/dma-buf/dma-buf.c out: · line 280
Quoted 10 lines
drivers/dma-buf/dma-buf.c +10
-0+return -EFAULT ; + +if (sync.flags &DMA_BUF_SYNC_RW ) + direction =DMA_BIDIRECTIONAL ; +else if (sync.flags &DMA_BUF_SYNC_READ ) + direction =DMA_FROM_DEVICE ; +else if (sync.flags &DMA_BUF_SYNC_WRITE ) + direction =DMA_TO_DEVICE ; +else +return -EINVAL ;
This looks bogus. It always ends up being "DMA_BIDIRECTIONAL" or EINVAL. I recommend changing it to:
switch (sync.flags & DMA_BUF_SYNC_RW) {
case DMA_BUF_SYNC_READ:
direction = DMA_FROM_DEVICE;
break;
case DMA_BUF_SYNC_WRITE:
direction = DMA_TO_DEVICE;
break;
case DMA_BUF_SYNC_READ:
direction = DMA_BIDIRECTIONAL;
break;
default:
return -EINVAL;
}drivers/dma-buf/dma-buf.c out: · line 283
Quoted 3 lines
drivers/dma-buf/dma-buf.c +3
-0+ +if (sync.flags & ~DMA_BUF_SYNC_VALID_FLAGS_MASK ) +return -EINVAL ;
Why isn't this done immediately after copy_from_user()?
drivers/dma-buf/dma-buf.c out: · line 288
Quoted 5 lines
drivers/dma-buf/dma-buf.c +5
-0+ +if (sync.flags &DMA_BUF_SYNC_END ) +dma_buf_end_cpu_access (dmabuf, direction); +else +dma_buf_begin_cpu_access (dmabuf, direction);
Why are SYNC_START and SYNC_END exclusive? It feels very natural to me to invoke both at the same time (especially if two objects are stored in the same dma-buf).
Quoted 37 lines
drivers/dma-buf/dma-buf.c +8
-0+ +return 0 ; +default : +return -ENOTTY ; + } +} +static const struct file_operations dma_buf_fops = { .release = dma_buf_release, .mmap = dma_buf_mmap_internal, .llseek = dma_buf_llseek, .poll = dma_buf_poll, + .unlocked_ioctl = dma_buf_ioctl, };/* include/uapi/linux/dma-buf.h new file +15
-0@@ -0,0 +1,38 @@ +/* +* Framework for buffer objects that can be shared across devices/subsystems. +* +* Copyright(C) 2015 Intel Ltd +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License version 2 as published by +* the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, but WITHOUT +* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +* more details. +* +* You should have received a copy of the GNU General Public License along with
include/uapi/linux/dma-buf.h line 25
Quoted 10 lines
include/uapi/linux/dma-buf.h new file +10
-0+* this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef _DMA_BUF_UAPI_H_ +#define _DMA_BUF_UAPI_H_ + +/* begin/end dma-buf functions used for userspace mmap. */ +struct dma_buf_sync { +__u64 flags; +};
Please add '#include <linux/types.h>', otherwise this header cannot be compiled on its own (missing __u64).
include/uapi/linux/dma-buf.h line 36
Quoted 11 lines
include/uapi/linux/dma-buf.h new file +11
-0+ +#define DMA_BUF_SYNC_READ (1 << 0) +#define DMA_BUF_SYNC_WRITE (2 << 0) +#define DMA_BUF_SYNC_RW (DMA_BUF_SYNC_READ | DMA_BUF_SYNC_WRITE) +#define DMA_BUF_SYNC_START (0 << 2) +#define DMA_BUF_SYNC_END (1 << 2) +#define DMA_BUF_SYNC_VALID_FLAGS_MASK \ + (DMA_BUF_SYNC_RW | DMA_BUF_SYNC_END) + +#define DMA_BUF_BASE 'b' +#define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct dma_buf_sync)
Why _IOW? A read-only ioctl should be able to call DMA_BUF_SYNC_READ, right?
Thanks
David
include/uapi/linux/dma-buf.h line 38
Quoted 2 lines
include/uapi/linux/dma-buf.h new file +2
-0+ +#endif
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v7 3/5] dma-buf: Add ioctls to allow userspace to flush
Quoted 205 lines · David Herrmann
Hi
Quoted 85 lines · Tiago Vignatti
From: Daniel Vetter <[email protected]>
The userspace might need some sort of cache coherency management e.g. when CPU and GPU domains are being accessed through dma-buf at the same time. To circumvent this problem there are begin/end coherency markers, that forward directly to existing dma-buf device drivers vfunc hooks. Userspace can make use of those markers through the
DMA_BUF_IOCTL_SYNCioctl. The sequence would be used like following:
- mmap dma-buf fd
- for each drawing/upload cycle in CPU 1.SYNC_STARTioctl, 2. read/write to mmap area 3.SYNC_ENDioctl. This can be repeated as often as you want (with the new data being consumed by the GPU or say scanout device)
- munmap once you don't need the buffer any morev2 (Tiago): Fix header file type names (u64 ->
__u64)
v3 (Tiago): Add documentation. Use enumdma_buf_sync_flagsto the begin/end dma-buf functions. Check for overflows in start/length.
v4 (Tiago): use 2d regions for sync.
v5 (Tiago): forget about 2d regions (v4); use_IOWinDMA_BUF_IOCTL_SYNCand remove range information from structdma_buf_sync.
v6 (Tiago): use__u64structured padded flags instead enum. Adjust documentation about the recommendation on using sync ioctls.
v7 (Tiago): Alex' nit on flags definition and being even more wording in the doc about sync usage.Cc Sumit Semwal <[email protected]>Signed-off-by Daniel Vetter <[email protected]>Signed-off-by Tiago Vignatti <[email protected]>--- Documentation/dma-buf-sharing.txt | 21 ++++++++++++++++++- drivers/dma-buf/dma-buf.c | 43 +++++++++++++++++++++++++++++++++++++++ include/uapi/linux/dma-buf.h | 38 ++++++++++++++++++++++++++++++++++ 3 files changed, 101 insertions(+), 1 deletion(-) create mode 100644 include/uapi/linux/dma-buf.hDocumentation/dma-buf-sharing.txt +20
-1@@ -350,7 +350,26 @@ Being able to mmap an export dma-buf buffer object has 2 main use-cases: handles, too). So it's beneficial to support this in a similar fashion on dma-buf to have a good transition path for existing Android userspace. - No special interfaces, userspace simply calls mmap on the dma-buf fd. + No special interfaces, userspace simply calls mmap on the dma-buf fd, making + sure that the cache synchronization ioctl (DMA_BUF_IOCTL_SYNC) is *always* + used when the access happens. This is discussed next paragraphs. + + Some systems might need some sort of cache coherency management e.g. when + CPU and GPU domains are being accessed through dma-buf at the same time. To + circumvent this problem there are begin/end coherency markers, that forward + directly to existing dma-buf device drivers vfunc hooks. Userspace can make + use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence + would be used like following: + - mmap dma-buf fd + - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write + to mmap area 3. SYNC_END ioctl. This can be repeated as often as you + want (with the new data being consumed by the GPU or say scanout device) + - munmap once you don't need the buffer any more + + Therefore, for correctness and optimal performance, systems with the memory + cache shared by the GPU and CPU i.e. the "coherent" and also the + "incoherent" are always required to use SYNC_START and SYNC_END before and + after, respectively, when accessing the mapped address. 2. Supporting existing mmap interfaces in importersdrivers/dma-buf/dma-buf.c +3
-0@@ -34,6 +34,8 @@#include <linux/poll.h> #include <linux/reservation.h> +#include <uapi/linux/dma-buf.h> +static inline int is_dma_buf_file (struct file *);struct dma_buf_list {@@ -251,11 +253,52 @@ out:return events; } +static long dma_buf_ioctl(struct file *file,drivers/dma-buf/dma-buf.c out: · line 266
Quoted 10 lines
drivers/dma-buf/dma-buf.c +10
-0+ unsigned int cmd, unsigned long arg) +{ +struct dma_buf *dmabuf; +struct dma_buf_sync sync; +enum dma_data_direction direction; + + dmabuf = file->private_data; + +if (!is_dma_buf_file (file)) +return -EINVAL ;Why? This can never happen, and you better not use
dma_buf_ioctl()outside ofdma_buf_fops..
I guess it's simply copied from the other fop callbacks, but I don't see why.dma_buf_poll()doesn't do it, neither should this, or one of the other 3 callbacks.Quoted 4 lines
drivers/dma-buf/dma-buf.c +4
-0+ +switch (cmd) { +case DMA_BUF_IOCTL_SYNC : +if (copy_from_user (&sync, (void __user *) arg,sizeof (sync)))drivers/dma-buf/dma-buf.c out: · line 280
Quoted 10 lines
drivers/dma-buf/dma-buf.c +10
-0+return -EFAULT ; + +if (sync.flags &DMA_BUF_SYNC_RW ) + direction =DMA_BIDIRECTIONAL ; +else if (sync.flags &DMA_BUF_SYNC_READ ) + direction =DMA_FROM_DEVICE ; +else if (sync.flags &DMA_BUF_SYNC_WRITE ) + direction =DMA_TO_DEVICE ; +else +return -EINVAL ;This looks bogus. It always ends up being "
DMA_BIDIRECTIONAL" or EINVAL. I recommend changing it to:switch (sync.flags &
DMA_BUF_SYNC_RW) {
caseDMA_BUF_SYNC_READ:direction = DMA_FROM_DEVICE; break; case DMA_BUF_SYNC_WRITE: direction = DMA_TO_DEVICE; break; case DMA_BUF_SYNC_READ: direction = DMA_BIDIRECTIONAL; break; default: return -EINVAL; }drivers/dma-buf/dma-buf.c out: · line 283
Quoted 3 lines
drivers/dma-buf/dma-buf.c +3
-0+ +if (sync.flags & ~DMA_BUF_SYNC_VALID_FLAGS_MASK ) +return -EINVAL ;Why isn't this done immediately after
copy_from_user()?drivers/dma-buf/dma-buf.c out: · line 288
Quoted 5 lines
drivers/dma-buf/dma-buf.c +5
-0+ +if (sync.flags &DMA_BUF_SYNC_END ) +dma_buf_end_cpu_access (dmabuf, direction); +else +dma_buf_begin_cpu_access (dmabuf, direction);Why are
SYNC_STARTandSYNC_ENDexclusive? It feels very natural to me to invoke both at the same time (especially if two objects are stored in the same dma-buf).Quoted 37 lines
drivers/dma-buf/dma-buf.c +8
-0+ +return 0 ; +default : +return -ENOTTY ; + } +} +static const struct file_operations dma_buf_fops = { .release = dma_buf_release, .mmap = dma_buf_mmap_internal, .llseek = dma_buf_llseek, .poll = dma_buf_poll, + .unlocked_ioctl = dma_buf_ioctl, };/* include/uapi/linux/dma-buf.h new file +15
-0@@ -0,0 +1,38 @@ +/* +* Framework for buffer objects that can be shared across devices/subsystems. +* +* Copyright(C) 2015 Intel Ltd +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License version 2 as published by +* the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, but WITHOUT +* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +* more details. +* +* You should have received a copy of the GNU General Public License along with include/uapi/linux/dma-buf.h line 25
Quoted 10 lines
include/uapi/linux/dma-buf.h new file +10
-0+* this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef _DMA_BUF_UAPI_H_ +#define _DMA_BUF_UAPI_H_ + +/* begin/end dma-buf functions used for userspace mmap. */ +struct dma_buf_sync { +__u64 flags; +};Please add '#include <
linux/types.h>', otherwise this header cannot be compiled on its own (missing__u64).
Quoted 13 lines
include/uapi/linux/dma-buf.h line 36
Quoted 11 lines
include/uapi/linux/dma-buf.h new file +11
-0+ +#define DMA_BUF_SYNC_READ (1 << 0) +#define DMA_BUF_SYNC_WRITE (2 << 0) +#define DMA_BUF_SYNC_RW (DMA_BUF_SYNC_READ | DMA_BUF_SYNC_WRITE) +#define DMA_BUF_SYNC_START (0 << 2) +#define DMA_BUF_SYNC_END (1 << 2) +#define DMA_BUF_SYNC_VALID_FLAGS_MASK \ + (DMA_BUF_SYNC_RW | DMA_BUF_SYNC_END) + +#define DMA_BUF_BASE 'b' +#define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct dma_buf_sync)Why
_IOW? A read-only ioctl should be able to callDMA_BUF_SYNC_READ, right?
Oops, looks like more work is needed. Thanks for your review.
I dropped patches 3-5 again meanwhile from drm-misc. -Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v7 3/5] dma-buf: Add ioctls to allow userspace to flush
Quoted 220 lines · Daniel Vetter
Quoted 205 lines · David Herrmann
Hi
Quoted 85 lines · Tiago Vignatti
From: Daniel Vetter <[email protected]>
The userspace might need some sort of cache coherency management e.g. when CPU and GPU domains are being accessed through dma-buf at the same time. To circumvent this problem there are begin/end coherency markers, that forward directly to existing dma-buf device drivers vfunc hooks. Userspace can make use of those markers through the
DMA_BUF_IOCTL_SYNCioctl. The sequence would be used like following:
- mmap dma-buf fd
- for each drawing/upload cycle in CPU 1.SYNC_STARTioctl, 2. read/write to mmap area 3.SYNC_ENDioctl. This can be repeated as often as you want (with the new data being consumed by the GPU or say scanout device)
- munmap once you don't need the buffer any morev2 (Tiago): Fix header file type names (u64 ->
__u64)
v3 (Tiago): Add documentation. Use enumdma_buf_sync_flagsto the begin/end dma-buf functions. Check for overflows in start/length.
v4 (Tiago): use 2d regions for sync.
v5 (Tiago): forget about 2d regions (v4); use_IOWinDMA_BUF_IOCTL_SYNCand remove range information from structdma_buf_sync.
v6 (Tiago): use__u64structured padded flags instead enum. Adjust documentation about the recommendation on using sync ioctls.
v7 (Tiago): Alex' nit on flags definition and being even more wording in the doc about sync usage.Cc Sumit Semwal <[email protected]>Signed-off-by Daniel Vetter <[email protected]>Signed-off-by Tiago Vignatti <[email protected]>--- Documentation/dma-buf-sharing.txt | 21 ++++++++++++++++++- drivers/dma-buf/dma-buf.c | 43 +++++++++++++++++++++++++++++++++++++++ include/uapi/linux/dma-buf.h | 38 ++++++++++++++++++++++++++++++++++ 3 files changed, 101 insertions(+), 1 deletion(-) create mode 100644 include/uapi/linux/dma-buf.hDocumentation/dma-buf-sharing.txt +20
-1@@ -350,7 +350,26 @@ Being able to mmap an export dma-buf buffer object has 2 main use-cases: handles, too). So it's beneficial to support this in a similar fashion on dma-buf to have a good transition path for existing Android userspace. - No special interfaces, userspace simply calls mmap on the dma-buf fd. + No special interfaces, userspace simply calls mmap on the dma-buf fd, making + sure that the cache synchronization ioctl (DMA_BUF_IOCTL_SYNC) is *always* + used when the access happens. This is discussed next paragraphs. + + Some systems might need some sort of cache coherency management e.g. when + CPU and GPU domains are being accessed through dma-buf at the same time. To + circumvent this problem there are begin/end coherency markers, that forward + directly to existing dma-buf device drivers vfunc hooks. Userspace can make + use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence + would be used like following: + - mmap dma-buf fd + - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write + to mmap area 3. SYNC_END ioctl. This can be repeated as often as you + want (with the new data being consumed by the GPU or say scanout device) + - munmap once you don't need the buffer any more + + Therefore, for correctness and optimal performance, systems with the memory + cache shared by the GPU and CPU i.e. the "coherent" and also the + "incoherent" are always required to use SYNC_START and SYNC_END before and + after, respectively, when accessing the mapped address. 2. Supporting existing mmap interfaces in importersdrivers/dma-buf/dma-buf.c +3
-0@@ -34,6 +34,8 @@#include <linux/poll.h> #include <linux/reservation.h> +#include <uapi/linux/dma-buf.h> +static inline int is_dma_buf_file (struct file *);struct dma_buf_list {@@ -251,11 +253,52 @@ out:return events; } +static long dma_buf_ioctl(struct file *file,drivers/dma-buf/dma-buf.c out: · line 266
Quoted 10 lines
drivers/dma-buf/dma-buf.c +10
-0+ unsigned int cmd, unsigned long arg) +{ +struct dma_buf *dmabuf; +struct dma_buf_sync sync; +enum dma_data_direction direction; + + dmabuf = file->private_data; + +if (!is_dma_buf_file (file)) +return -EINVAL ;Why? This can never happen, and you better not use
dma_buf_ioctl()outside ofdma_buf_fops..
I guess it's simply copied from the other fop callbacks, but I don't see why.dma_buf_poll()doesn't do it, neither should this, or one of the other 3 callbacks.Quoted 4 lines
drivers/dma-buf/dma-buf.c +4
-0+ +switch (cmd) { +case DMA_BUF_IOCTL_SYNC : +if (copy_from_user (&sync, (void __user *) arg,sizeof (sync)))drivers/dma-buf/dma-buf.c out: · line 280
Quoted 10 lines
drivers/dma-buf/dma-buf.c +10
-0+return -EFAULT ; + +if (sync.flags &DMA_BUF_SYNC_RW ) + direction =DMA_BIDIRECTIONAL ; +else if (sync.flags &DMA_BUF_SYNC_READ ) + direction =DMA_FROM_DEVICE ; +else if (sync.flags &DMA_BUF_SYNC_WRITE ) + direction =DMA_TO_DEVICE ; +else +return -EINVAL ;This looks bogus. It always ends up being "
DMA_BIDIRECTIONAL" or EINVAL. I recommend changing it to:switch (sync.flags &
DMA_BUF_SYNC_RW) {
caseDMA_BUF_SYNC_READ:direction = DMA_FROM_DEVICE; break; case DMA_BUF_SYNC_WRITE: direction = DMA_TO_DEVICE; break; case DMA_BUF_SYNC_READ: direction = DMA_BIDIRECTIONAL; break; default: return -EINVAL; }drivers/dma-buf/dma-buf.c out: · line 283
Quoted 3 lines
drivers/dma-buf/dma-buf.c +3
-0+ +if (sync.flags & ~DMA_BUF_SYNC_VALID_FLAGS_MASK ) +return -EINVAL ;Why isn't this done immediately after
copy_from_user()?drivers/dma-buf/dma-buf.c out: · line 288
Quoted 5 lines
drivers/dma-buf/dma-buf.c +5
-0+ +if (sync.flags &DMA_BUF_SYNC_END ) +dma_buf_end_cpu_access (dmabuf, direction); +else +dma_buf_begin_cpu_access (dmabuf, direction);Why are
SYNC_STARTandSYNC_ENDexclusive? It feels very natural to me to invoke both at the same time (especially if two objects are stored in the same dma-buf).Quoted 37 lines
drivers/dma-buf/dma-buf.c +8
-0+ +return 0 ; +default : +return -ENOTTY ; + } +} +static const struct file_operations dma_buf_fops = { .release = dma_buf_release, .mmap = dma_buf_mmap_internal, .llseek = dma_buf_llseek, .poll = dma_buf_poll, + .unlocked_ioctl = dma_buf_ioctl, };/* include/uapi/linux/dma-buf.h new file +15
-0@@ -0,0 +1,38 @@ +/* +* Framework for buffer objects that can be shared across devices/subsystems. +* +* Copyright(C) 2015 Intel Ltd +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License version 2 as published by +* the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, but WITHOUT +* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +* more details. +* +* You should have received a copy of the GNU General Public License along with include/uapi/linux/dma-buf.h line 25
Quoted 10 lines
include/uapi/linux/dma-buf.h new file +10
-0+* this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef _DMA_BUF_UAPI_H_ +#define _DMA_BUF_UAPI_H_ + +/* begin/end dma-buf functions used for userspace mmap. */ +struct dma_buf_sync { +__u64 flags; +};Please add '#include <
linux/types.h>', otherwise this header cannot be compiled on its own (missing__u64).Quoted 13 lines
include/uapi/linux/dma-buf.h line 36
Quoted 11 lines
include/uapi/linux/dma-buf.h new file +11
-0+ +#define DMA_BUF_SYNC_READ (1 << 0) +#define DMA_BUF_SYNC_WRITE (2 << 0) +#define DMA_BUF_SYNC_RW (DMA_BUF_SYNC_READ | DMA_BUF_SYNC_WRITE) +#define DMA_BUF_SYNC_START (0 << 2) +#define DMA_BUF_SYNC_END (1 << 2) +#define DMA_BUF_SYNC_VALID_FLAGS_MASK \ + (DMA_BUF_SYNC_RW | DMA_BUF_SYNC_END) + +#define DMA_BUF_BASE 'b' +#define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct dma_buf_sync)Why
_IOW? A read-only ioctl should be able to callDMA_BUF_SYNC_READ, right?
Quoted 3 lines
Oops, looks like more work is needed. Thanks for your review.
I dropped patches 3-5 again meanwhile from drm-misc.
Correction: Only dropped this patch, since the internal interfaces stayed the same.
-Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v7 3/5] dma-buf: Add ioctls to allow userspace to flush
In reply to David HerrmannThanks for reviewing, David. Please take a look in my comments in-line.
Quoted 96 lines · David Herrmann
Quoted 93 lines · Tiago Vignatti
From: Daniel Vetter <[email protected]>
The userspace might need some sort of cache coherency management e.g. when CPU and GPU domains are being accessed through dma-buf at the same time. To circumvent this problem there are begin/end coherency markers, that forward directly to existing dma-buf device drivers vfunc hooks. Userspace can make use of those markers through the
DMA_BUF_IOCTL_SYNCioctl. The sequence would be used like following:
- mmap dma-buf fd
- for each drawing/upload cycle in CPU 1.SYNC_STARTioctl, 2. read/write to mmap area 3.SYNC_ENDioctl. This can be repeated as often as you want (with the new data being consumed by the GPU or say scanout device)
- munmap once you don't need the buffer any morev2 (Tiago): Fix header file type names (u64 ->
__u64)
v3 (Tiago): Add documentation. Use enumdma_buf_sync_flagsto the begin/end dma-buf functions. Check for overflows in start/length.
v4 (Tiago): use 2d regions for sync.
v5 (Tiago): forget about 2d regions (v4); use_IOWinDMA_BUF_IOCTL_SYNCand remove range information from structdma_buf_sync.
v6 (Tiago): use__u64structured padded flags instead enum. Adjust documentation about the recommendation on using sync ioctls.
v7 (Tiago): Alex' nit on flags definition and being even more wording in the doc about sync usage.Cc Sumit Semwal <[email protected]>Signed-off-by Daniel Vetter <[email protected]>Signed-off-by Tiago Vignatti <[email protected]>--- Documentation/dma-buf-sharing.txt | 21 ++++++++++++++++++- drivers/dma-buf/dma-buf.c | 43 +++++++++++++++++++++++++++++++++++++++ include/uapi/linux/dma-buf.h | 38 ++++++++++++++++++++++++++++++++++ 3 files changed, 101 insertions(+), 1 deletion(-)create mode 100644
include/uapi/linux/dma-buf.hDocumentation/dma-buf-sharing.txt +20
-1@@ -350,7 +350,26 @@ Being able to mmap an export dma-buf buffer object has 2 main use-cases: handles, too). So it's beneficial to support this in a similar fashion on dma-buf to have a good transition path for existing Android userspace. - No special interfaces, userspace simply calls mmap on the dma-buf fd. + No special interfaces, userspace simply calls mmap on the dma-buf fd, making + sure that the cache synchronization ioctl (DMA_BUF_IOCTL_SYNC) is *always* + used when the access happens. This is discussed next paragraphs. + + Some systems might need some sort of cache coherency management e.g. when + CPU and GPU domains are being accessed through dma-buf at the same time. To + circumvent this problem there are begin/end coherency markers, that forward + directly to existing dma-buf device drivers vfunc hooks. Userspace can make + use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence + would be used like following: + - mmap dma-buf fd + - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write + to mmap area 3. SYNC_END ioctl. This can be repeated as often as you + want (with the new data being consumed by the GPU or say scanout device) + - munmap once you don't need the buffer any more + + Therefore, for correctness and optimal performance, systems with the memory + cache shared by the GPU and CPU i.e. the "coherent" and also the + "incoherent" are always required to use SYNC_START and SYNC_END before and + after, respectively, when accessing the mapped address. 2. Supporting existing mmap interfaces in importersdrivers/dma-buf/dma-buf.c +11
-0@@ -34,6 +34,8 @@#include <linux/poll.h> #include <linux/reservation.h> +#include <uapi/linux/dma-buf.h> +static inline int is_dma_buf_file (struct file *);struct dma_buf_list {@@ -251,11 +253,52 @@ out:return events; } +static long dma_buf_ioctl (struct file *file, +unsigned int cmd,unsigned long arg) +{ +struct dma_buf *dmabuf; +struct dma_buf_sync sync; +enum dma_data_direction direction; + + dmabuf = file->private_data; +
Quoted 8 lines
drivers/dma-buf/dma-buf.c out: · line 266
Quoted 2 lines
drivers/dma-buf/dma-buf.c +2
-0+if (!is_dma_buf_file (file)) +return -EINVAL ;Why? This can never happen, and you better not use
dma_buf_ioctl()outside ofdma_buf_fops..
I guess it's simply copied from the other fop callbacks, but I don't see why.dma_buf_poll()doesn't do it, neither should this, or one of the other 3 callbacks.
yup. I fixed now.
Quoted 20 lines
Quoted 4 lines
drivers/dma-buf/dma-buf.c +4
-0+ +switch (cmd) { +case DMA_BUF_IOCTL_SYNC : +if (copy_from_user (&sync, (void __user *) arg,sizeof (sync)))drivers/dma-buf/dma-buf.c out: · line 280
Quoted 10 lines
drivers/dma-buf/dma-buf.c +10
-0+return -EFAULT ; + +if (sync.flags &DMA_BUF_SYNC_RW ) + direction =DMA_BIDIRECTIONAL ; +else if (sync.flags &DMA_BUF_SYNC_READ ) + direction =DMA_FROM_DEVICE ; +else if (sync.flags &DMA_BUF_SYNC_WRITE ) + direction =DMA_TO_DEVICE ; +else +return -EINVAL ;This looks bogus. It always ends up being "
DMA_BIDIRECTIONAL" or EINVAL. I recommend changing it to:switch (sync.flags &
DMA_BUF_SYNC_RW) {
caseDMA_BUF_SYNC_READ:
Quoted 11 lines
direction = DMA_FROM_DEVICE;
break;
case DMA_BUF_SYNC_WRITE:
direction = DMA_TO_DEVICE;
break;
case DMA_BUF_SYNC_READ:
direction = DMA_BIDIRECTIONAL;
break;
default:
return -EINVAL;
}hmm I can't really get what's wrong with my snip. Why bogus? Can you double-check actually your suggestion, cause that's wrong with _READ being repeated.
Quoted 5 lines
drivers/dma-buf/dma-buf.c out: · line 283
Quoted 3 lines
drivers/dma-buf/dma-buf.c +3
-0+ +if (sync.flags & ~DMA_BUF_SYNC_VALID_FLAGS_MASK ) +return -EINVAL ;Why isn't this done immediately after
copy_from_user()?
done.
Quoted 9 lines
drivers/dma-buf/dma-buf.c out: · line 288
Quoted 5 lines
drivers/dma-buf/dma-buf.c +5
-0+ +if (sync.flags &DMA_BUF_SYNC_END ) +dma_buf_end_cpu_access (dmabuf, direction); +else +dma_buf_begin_cpu_access (dmabuf, direction);Why are
SYNC_STARTandSYNC_ENDexclusive? It feels very natural to me to invoke both at the same time (especially if two objects are stored in the same dma-buf).
Can you open a bit and teach how two objects would be stored in the same dma-buf? I didn't care about this case and if we want that, we'd need also to change the sequence of accesses as described in the dma-buf-sharing.txt I'm proposing in this patch.
Quoted 42 lines
Quoted 42 lines
drivers/dma-buf/dma-buf.c +8
-0+ +return 0 ; +default : +return -ENOTTY ; + } +} +static const struct file_operations dma_buf_fops = { .release = dma_buf_release, .mmap = dma_buf_mmap_internal, .llseek = dma_buf_llseek, .poll = dma_buf_poll, + .unlocked_ioctl = dma_buf_ioctl, };/* include/uapi/linux/dma-buf.h new file +20
-0@@ -0,0 +1,38 @@ +/* +* Framework for buffer objects that can be shared across devices/subsystems. +* +* Copyright(C) 2015 Intel Ltd +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License version 2 as published by +* the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, but WITHOUT +* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +* more details. +* +* You should have received a copy of the GNU General Public License along with +* this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef _DMA_BUF_UAPI_H_ +#define _DMA_BUF_UAPI_H_
Quoted 8 lines
include/uapi/linux/dma-buf.h line 25
Quoted 5 lines
include/uapi/linux/dma-buf.h new file +5
-0+ +/* begin/end dma-buf functions used for userspace mmap. */ +struct dma_buf_sync { +__u64 flags; +};Please add '#include <
linux/types.h>', otherwise this header cannot be compiled on its own (missing__u64).
done.
Quoted 5 lines
Quoted 5 lines
include/uapi/linux/dma-buf.h new file +5
-0+ +#define DMA_BUF_SYNC_READ (1 << 0) +#define DMA_BUF_SYNC_WRITE (2 << 0) +#define DMA_BUF_SYNC_RW (DMA_BUF_SYNC_READ | DMA_BUF_SYNC_WRITE) +#define DMA_BUF_SYNC_START (0 << 2)
Quoted 8 lines
include/uapi/linux/dma-buf.h line 36
Quoted 6 lines
include/uapi/linux/dma-buf.h new file +6
-0+#define DMA_BUF_SYNC_END (1 << 2) +#define DMA_BUF_SYNC_VALID_FLAGS_MASK \ + (DMA_BUF_SYNC_RW | DMA_BUF_SYNC_END) + +#define DMA_BUF_BASE 'b' +#define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct dma_buf_sync)Why
_IOW? A read-only ioctl should be able to callDMA_BUF_SYNC_READ, right?
yup. I've changed it to _IOWR now.
Tiago
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v7 3/5] dma-buf: Add ioctls to allow userspace to flush
Quoted 179 lines · Tiago Vignatti
Thanks for reviewing, David. Please take a look in my comments in-line.
Quoted 127 lines · David Herrmann
Quoted 123 lines · Tiago Vignatti
From: Daniel Vetter <[email protected]>
The userspace might need some sort of cache coherency management e.g. when CPU
and GPU domains are being accessed through dma-buf at the same time. To circumvent this problem there are begin/end coherency markers, that forward
directly to existing dma-buf device drivers vfunc hooks. Userspace can make use
of those markers through theDMA_BUF_IOCTL_SYNCioctl. The sequence would be
used like following:
- mmap dma-buf fd
- for each drawing/upload cycle in CPU 1.SYNC_STARTioctl, 2.
read/write
to mmap area 3.SYNC_ENDioctl. This can be repeated as often as
you
want (with the new data being consumed by the GPU or say scanout
device)
- munmap once you don't need the buffer any morev2 (Tiago): Fix header file type names (u64 ->
__u64)
v3 (Tiago): Add documentation. Use enumdma_buf_sync_flagsto the begin/end
dma-buf functions. Check for overflows in start/length.
v4 (Tiago): use 2d regions for sync.
v5 (Tiago): forget about 2d regions (v4); use_IOWinDMA_BUF_IOCTL_SYNCand
remove range information from structdma_buf_sync.
v6 (Tiago): use__u64structured padded flags instead enum. Adjust documentation about the recommendation on using sync ioctls. v7 (Tiago): Alex' nit on flags definition and being even more wording in the
doc about sync usage.Cc Sumit Semwal <[email protected]>Signed-off-by Daniel Vetter <[email protected]>Signed-off-by Tiago Vignatti <[email protected]>--- Documentation/dma-buf-sharing.txt | 21 ++++++++++++++++++- drivers/dma-buf/dma-buf.c | 43 +++++++++++++++++++++++++++++++++++++++ include/uapi/linux/dma-buf.h | 38 ++++++++++++++++++++++++++++++++++ 3 files changed, 101 insertions(+), 1 deletion(-)create mode 100644
include/uapi/linux/dma-buf.hDocumentation/dma-buf-sharing.txt +0
-0@@ -350,7 +350,26 @@ Being able to mmap an export dma-buf buffer objecthas 2 main use-cases:
handles, too). So it's beneficial to support this in a similar
fashion on
dma-buf to have a good transition path for existing Android
userspace.Documentation/dma-buf-sharing.txt +1
-1- No special interfaces, userspace simply calls mmap on the dma-buf fd. + No special interfaces, userspace simply calls mmap on the dma-buf fd,making
+ sure that the cache synchronization ioctl (DMA_BUF_IOCTL_SYNC) is
*always*Documentation/dma-buf-sharing.txt +3
-0+ used when the access happens. This is discussed next paragraphs. + + Some systems might need some sort of cache coherency management e.g.when
+ CPU and GPU domains are being accessed through dma-buf at the same
time. To
+ circumvent this problem there are begin/end coherency markers, that
forward
+ directly to existing dma-buf device drivers vfunc hooks. Userspace
can make
+ use of those markers through theDMA_BUF_IOCTL_SYNCioctl. The
sequenceDocumentation/dma-buf-sharing.txt +3
-0+ would be used like following: + - mmap dma-buf fd + - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2.read/write
+ to mmap area 3.SYNC_ENDioctl. This can be repeated as often as
you
+ want (with the new data being consumed by the GPU or say scanout
device)Documentation/dma-buf-sharing.txt +3
-0+ - munmap once you don't need the buffer any more + + Therefore, for correctness and optimal performance, systems with thememory
Documentation/dma-buf-sharing.txt +2
-0+ cache shared by the GPU and CPU i.e. the "coherent" and also the + "incoherent" are always required to use SYNC_START and SYNC_ENDbefore and
Documentation/dma-buf-sharing.txt +1
-0+ after, respectively, when accessing the mapped address. 2. Supporting existing mmap interfaces in importersdrivers/dma-buf/dma-buf.c +12
-0@@ -34,6 +34,8 @@#include <linux/poll.h> #include <linux/reservation.h> +#include <uapi/linux/dma-buf.h> +static inline int is_dma_buf_file (struct file *);struct dma_buf_list {@@ -251,11 +253,52 @@ out:return events; } +static long dma_buf_ioctl (struct file *file, +unsigned int cmd,unsigned long arg) +{ +struct dma_buf *dmabuf; +struct dma_buf_sync sync; +enum dma_data_direction direction; + + dmabuf = file->private_data; + +if (!is_dma_buf_file (file))Quoted 8 lines
drivers/dma-buf/dma-buf.c out: · line 266
Quoted 1 line
drivers/dma-buf/dma-buf.c +1
-0+return -EINVAL ;Why? This can never happen, and you better not use
dma_buf_ioctl()outside ofdma_buf_fops..
I guess it's simply copied from the other fop callbacks, but I don't see why.dma_buf_poll()doesn't do it, neither should this, or one of the other 3 callbacks.yup. I fixed now.
Quoted 22 lines
Quoted 5 lines
drivers/dma-buf/dma-buf.c +4
-0+ +switch (cmd) { +case DMA_BUF_IOCTL_SYNC : +if (copy_from_user (&sync, (void __user *) arg,sizeof (sync)))drivers/dma-buf/dma-buf.c out: · line 280
Quoted 10 lines
drivers/dma-buf/dma-buf.c +10
-0+return -EFAULT ; + +if (sync.flags &DMA_BUF_SYNC_RW ) + direction =DMA_BIDIRECTIONAL ; +else if (sync.flags &DMA_BUF_SYNC_READ ) + direction =DMA_FROM_DEVICE ; +else if (sync.flags &DMA_BUF_SYNC_WRITE ) + direction =DMA_TO_DEVICE ; +else +return -EINVAL ;This looks bogus. It always ends up being "
DMA_BIDIRECTIONAL" or EINVAL. I recommend changing it to:switch (sync.flags &
DMA_BUF_SYNC_RW) {
caseDMA_BUF_SYNC_READ:Quoted 11 lines
direction = DMA_FROM_DEVICE; break; case DMA_BUF_SYNC_WRITE: direction = DMA_TO_DEVICE; break; case DMA_BUF_SYNC_READ: direction = DMA_BIDIRECTIONAL; break; default: return -EINVAL; }
Quoted 4 lines
hmm I can't really get what's wrong with my snip. Why bogus? Can you double-check actually your suggestion, cause that's wrong with
_READbeing repeated.
It should be something like:
switch (sync.flags & DMA_BUF_SYNC_RW) {
case DMA_BUF_SYNC_READ:
direction = DMA_FROM_DEVICE;
break;
case DMA_BUF_SYNC_WRITE:
direction = DMA_TO_DEVICE;
break;
case DMA_BUF_SYNC_RW:
direction = DMA_BIDIRECTIONAL;
break;
default:
return -EINVAL;
}In your code, the first if case:
+ if (sync.flags & DMA_BUF_SYNC_RW)
Will catch read, write and rw.
Alex
Quoted 110 lines
Quoted 7 lines
drivers/dma-buf/dma-buf.c out: · line 283
Quoted 4 lines
drivers/dma-buf/dma-buf.c +3
-0+ +if (sync.flags & ~DMA_BUF_SYNC_VALID_FLAGS_MASK ) +return -EINVAL ;Why isn't this done immediately after
copy_from_user()?done.
Quoted 10 lines
drivers/dma-buf/dma-buf.c out: · line 288
Quoted 5 lines
drivers/dma-buf/dma-buf.c +5
-0+ +if (sync.flags &DMA_BUF_SYNC_END ) +dma_buf_end_cpu_access (dmabuf, direction); +else +dma_buf_begin_cpu_access (dmabuf, direction);Why are
SYNC_STARTandSYNC_ENDexclusive? It feels very natural to me to invoke both at the same time (especially if two objects are stored in the same dma-buf).Can you open a bit and teach how two objects would be stored in the same dma-buf? I didn't care about this case and if we want that, we'd need also to change the sequence of accesses as described in the dma-buf-sharing.txt I'm proposing in this patch.
Quoted 49 lines
Quoted 49 lines
drivers/dma-buf/dma-buf.c +8
-0+ +return 0 ; +default : +return -ENOTTY ; + } +} +static const struct file_operations dma_buf_fops = { .release = dma_buf_release, .mmap = dma_buf_mmap_internal, .llseek = dma_buf_llseek, .poll = dma_buf_poll, + .unlocked_ioctl = dma_buf_ioctl, };/*
include/uapi/linux/dma-buf.h new file +2
-0@@ -0,0 +1,38 @@ +/* +* Framework for buffer objects that can be shared across devices/subsystems.
+ *
+ * Copyright(C) 2015 Intel Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */include/uapi/linux/dma-buf.h new file +4
-0+ +#ifndef _DMA_BUF_UAPI_H_ +#define _DMA_BUF_UAPI_H_ +Quoted 8 lines
include/uapi/linux/dma-buf.h line 25
Quoted 4 lines
include/uapi/linux/dma-buf.h new file +4
-0+/* begin/end dma-buf functions used for userspace mmap. */ +struct dma_buf_sync { +__u64 flags; +};Please add '#include <
linux/types.h>', otherwise this header cannot be compiled on its own (missing__u64).done.
Quoted 8 lines
Quoted 8 lines
include/uapi/linux/dma-buf.h new file +8
-0+ +#define DMA_BUF_SYNC_READ (1 << 0) +#define DMA_BUF_SYNC_WRITE (2 << 0) +#define DMA_BUF_SYNC_RW (DMA_BUF_SYNC_READ | DMA_BUF_SYNC_WRITE) +#define DMA_BUF_SYNC_START (0 << 2) +#define DMA_BUF_SYNC_END (1 << 2) +#define DMA_BUF_SYNC_VALID_FLAGS_MASK \ + (DMA_BUF_SYNC_RW | DMA_BUF_SYNC_END)Quoted 8 lines
Quoted 4 lines
include/uapi/linux/dma-buf.h new file +3
-0+ +#define DMA_BUF_BASE 'b' +#define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct
dma_buf_sync)Why
_IOW? A read-only ioctl should be able to callDMA_BUF_SYNC_READ, right?
Quoted 8 lines
yup. I've changed it to
_IOWRnow.Tiago
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v7 3/5] dma-buf: Add ioctls to allow userspace to flush
In reply to Tiago VignattiHi
Quoted 36 lines · Tiago Vignatti
Quoted 22 lines · David Herrmann
Quoted 5 lines
drivers/dma-buf/dma-buf.c +4
-0+ +switch (cmd) { +case DMA_BUF_IOCTL_SYNC : + if (copy_from_user(&sync, (void __user *) arg,sizeof(sync)))
drivers/dma-buf/dma-buf.c out: · line 280
Quoted 10 lines
drivers/dma-buf/dma-buf.c +10
-0+return -EFAULT ; + +if (sync.flags &DMA_BUF_SYNC_RW ) + direction =DMA_BIDIRECTIONAL ; +else if (sync.flags &DMA_BUF_SYNC_READ ) + direction =DMA_FROM_DEVICE ; +else if (sync.flags &DMA_BUF_SYNC_WRITE ) + direction =DMA_TO_DEVICE ; +else +return -EINVAL ;This looks bogus. It always ends up being "
DMA_BIDIRECTIONAL" or EINVAL. I recommend changing it to:switch (sync.flags &
DMA_BUF_SYNC_RW) {
caseDMA_BUF_SYNC_READ:Quoted 11 lines
direction = DMA_FROM_DEVICE; break; case DMA_BUF_SYNC_WRITE: direction = DMA_TO_DEVICE; break; case DMA_BUF_SYNC_READ: direction = DMA_BIDIRECTIONAL; break; default: return -EINVAL; }
Quoted 3 lines
hmm I can't really get what's wrong with my snip. Why bogus? Can you double-check actually your suggestion, cause that's wrong with
_READbeing repeated.
You did this:
if (sync.flags & DMA_BUF_SYNC_RW)
...but what you meant is this:
if ((sync.flags & DMA_BUF_SYNC_RW) == DMA_BUF_SYNC_RW)
Feel free to fix it with this simple change. I just thought a switch() statement would be easier to read. And yes, I screwed up the third 'case' statement, which should read DMA_BUF_SYNC_RW rather than DMA_BUF_SYNC_READ. Sorry for that.
Quoted 12 lines
Quoted 10 lines
drivers/dma-buf/dma-buf.c out: · line 288
Quoted 5 lines
drivers/dma-buf/dma-buf.c +5
-0+ +if (sync.flags &DMA_BUF_SYNC_END ) +dma_buf_end_cpu_access (dmabuf, direction); +else +dma_buf_begin_cpu_access (dmabuf, direction);Why are
SYNC_STARTandSYNC_ENDexclusive? It feels very natural to me to invoke both at the same time (especially if two objects are stored in the same dma-buf).
Quoted 4 lines
Can you open a bit and teach how two objects would be stored in the same dma-buf? I didn't care about this case and if we want that, we'd need also to change the sequence of accesses as described in the dma-buf-sharing.txt I'm proposing in this patch.
Just store two frames next to each other in the same BO. Create two DRM-FBs with different offsets, covering one frame each. Now you can just switch between the two FBs, backed by the same object.
I'm not saying that this is a good idea. I just wondered why the START/END was exclusive, rather than inclusive. But.. I guess it is cheap enough that someone can just call ioctl(END) followed by ioctl(START).
Quoted 18 lines
Quoted 8 lines
Quoted 8 lines
include/uapi/linux/dma-buf.h new file +8
-0+ +#define DMA_BUF_SYNC_READ (1 << 0) +#define DMA_BUF_SYNC_WRITE (2 << 0) +#define DMA_BUF_SYNC_RW (DMA_BUF_SYNC_READ | DMA_BUF_SYNC_WRITE) +#define DMA_BUF_SYNC_START (0 << 2) +#define DMA_BUF_SYNC_END (1 << 2) +#define DMA_BUF_SYNC_VALID_FLAGS_MASK \ + (DMA_BUF_SYNC_RW | DMA_BUF_SYNC_END)Quoted 8 lines
Quoted 4 lines
include/uapi/linux/dma-buf.h new file +3
-0+ +#define DMA_BUF_BASE 'b' +#define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct
dma_buf_sync)Why
_IOW? A read-only ioctl should be able to callDMA_BUF_SYNC_READ, right?
Quoted 1 line
yup. I've changed it to
_IOWRnow.
Well, I'd have used _IOC_NONE, rather than READ/WRITE, but I just checked and it seems vfs doesn't even enforce them. So... eh... I don't care.
Thanks
David
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v7 3/5] dma-buf: Add ioctls to allow userspace to flush
In reply to Tiago VignattiQuoted 9 lines · Tiago Vignatti
Thanks for reviewing, David. Please take a look in my comments in-line.
Quoted 4 lines · David Herrmann
Quoted 1 line · Tiago Vignatti
From: Daniel Vetter <[email protected]>
<snip>
Quoted 14 lines
Quoted 5 lines
Quoted 5 lines
include/uapi/linux/dma-buf.h new file +5
-0+ +#define DMA_BUF_SYNC_READ (1 << 0) +#define DMA_BUF_SYNC_WRITE (2 << 0) +#define DMA_BUF_SYNC_RW (DMA_BUF_SYNC_READ | DMA_BUF_SYNC_WRITE) +#define DMA_BUF_SYNC_START (0 << 2)Quoted 8 lines
include/uapi/linux/dma-buf.h line 36
Quoted 6 lines
include/uapi/linux/dma-buf.h new file +6
-0+#define DMA_BUF_SYNC_END (1 << 2) +#define DMA_BUF_SYNC_VALID_FLAGS_MASK \ + (DMA_BUF_SYNC_RW | DMA_BUF_SYNC_END) + +#define DMA_BUF_BASE 'b' +#define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct dma_buf_sync)Why
_IOW? A read-only ioctl should be able to callDMA_BUF_SYNC_READ, right?
Quoted 1 line
yup. I've changed it to
_IOWRnow.
AFAICS the ioctl only does copy_from_user() so _IOW seemed perfectly correct to me.
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v7 3/5] dma-buf: Add ioctls to allow userspace to flush
Hi
Quoted 25 lines · Ville Syrjälä
Quoted 9 lines · Tiago Vignatti
Thanks for reviewing, David. Please take a look in my comments in-line.
Quoted 4 lines · David Herrmann
Quoted 1 line · Tiago Vignatti
From: Daniel Vetter <[email protected]>
<snip>
Quoted 14 lines
Quoted 13 lines
include/uapi/linux/dma-buf.h line 36
Quoted 11 lines
include/uapi/linux/dma-buf.h new file +11
-0+ +#define DMA_BUF_SYNC_READ (1 << 0) +#define DMA_BUF_SYNC_WRITE (2 << 0) +#define DMA_BUF_SYNC_RW (DMA_BUF_SYNC_READ | DMA_BUF_SYNC_WRITE) +#define DMA_BUF_SYNC_START (0 << 2) +#define DMA_BUF_SYNC_END (1 << 2) +#define DMA_BUF_SYNC_VALID_FLAGS_MASK \ + (DMA_BUF_SYNC_RW | DMA_BUF_SYNC_END) + +#define DMA_BUF_BASE 'b' +#define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct dma_buf_sync)Why
_IOW? A read-only ioctl should be able to callDMA_BUF_SYNC_READ, right?
Quoted 4 lines
Quoted 1 line
yup. I've changed it to
_IOWRnow.AFAICS the ioctl only does
copy_from_user()so_IOWseemed perfectly correct to me.
AFAIK, the _IOC_DIR() arguments in ioctls specify the mode of the operation, not the way the arguments are used. So if read(2) was an ioctl, it would be annotated as _IOC_READ (even though it _writes_ into the passed buffer). write(2) would be annotated as _IOC_WRITE (even though it _reads_ the buffer). As such, they correspond to the file-access mode, whether you opened it readable and/or writable.
Anyway, turns out VFS does not verify those. As such, you can specify whatever you want. I just checked with different existing ioctls throughout the kernel (git grep _IOC_DIR), and they seem to match what I describe.
But I don't care much. I guess _IORW is fine either way. David
_______________________________________________
dri-devel mailing list [email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v7 3/5] dma-buf: Add ioctls to allow userspace to flush
Quoted 41 lines · David Herrmann
Hi
Quoted 25 lines · Ville Syrjälä
Quoted 9 lines · Tiago Vignatti
Thanks for reviewing, David. Please take a look in my comments in-line.
Quoted 4 lines · David Herrmann
Quoted 1 line · Tiago Vignatti
From: Daniel Vetter <[email protected]>
<snip>
Quoted 14 lines
Quoted 13 lines
include/uapi/linux/dma-buf.h line 36
Quoted 11 lines
include/uapi/linux/dma-buf.h new file +11
-0+ +#define DMA_BUF_SYNC_READ (1 << 0) +#define DMA_BUF_SYNC_WRITE (2 << 0) +#define DMA_BUF_SYNC_RW (DMA_BUF_SYNC_READ | DMA_BUF_SYNC_WRITE) +#define DMA_BUF_SYNC_START (0 << 2) +#define DMA_BUF_SYNC_END (1 << 2) +#define DMA_BUF_SYNC_VALID_FLAGS_MASK \ + (DMA_BUF_SYNC_RW | DMA_BUF_SYNC_END) + +#define DMA_BUF_BASE 'b' +#define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct dma_buf_sync)Why
_IOW? A read-only ioctl should be able to callDMA_BUF_SYNC_READ, right?Quoted 4 lines
Quoted 1 line
yup. I've changed it to
_IOWRnow.AFAICS the ioctl only does
copy_from_user()so_IOWseemed perfectly correct to me.AFAIK, the
_IOC_DIR()arguments in ioctls specify the mode of the operation, not the way the arguments are used. So if read(2) was an ioctl, it would be annotated as_IOC_READ(even though it _writes_ into the passed buffer). write(2) would be annotated as_IOC_WRITE(even though it _reads_ the buffer). As such, they correspond to the file-access mode, whether you opened it readable and/or writable.
Quoted 4 lines
Anyway, turns out VFS does not verify those. As such, you can specify whatever you want. I just checked with different existing ioctls throughout the kernel (
git grep _IOC_DIR), and they seem to match what I describe.
Not sure which ones you checked because I don't think I've ever seen that interpretation in the kernel. Though I suppose often it sort of matches, eg. when the ioctl just gets/sets some value. Any relationship to some hardware operation is mostly coincidental (well, except when the hardware really just does some kind of read/write operation). And for lost ioctls there is no hardware interaction whatsoever.
As far as checking the file access mode goes, well lots of ioctls totally ignore it.
About the direction you're right. _IOW means userspace writes to the kernel, and _IOR means userspace reads from the kernel. Which is exactly what the code did.
Anyway ioctl-numbers.txt says this:
_IO an ioctl with no parameters _IOW an ioctl with write parameters (copy_from_user) _IOR an ioctl with read parameters (copy_to_user) _IOWR an ioctl with both write and read parameters.
so I win ;)
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v9 1/1 dma-buf: Add ioctls to allow userspace to flush
From: Daniel Vetter <[email protected]>
The userspace might need some sort of cache coherency management e.g. when CPU and GPU domains are being accessed through dma-buf at the same time. To circumvent this problem there are begin/end coherency markers, that forward directly to existing dma-buf device drivers vfunc hooks. Userspace can make use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence would be used like following:
- mmap dma-buf fd
- for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write to mmap area 3. SYNC_END ioctl. This can be repeated as often as you want (with the new data being consumed by the GPU or say scanout device)
- munmap once you don't need the buffer any more
v2 (Tiago): Fix header file type names (u64 -> __u64)
v3 (Tiago): Add documentation. Use enum dma_buf_sync_flags to the begin/end dma-buf functions. Check for overflows in start/length.
v4 (Tiago): use 2d regions for sync.
v5 (Tiago): forget about 2d regions (v4); use _IOW in DMA_BUF_IOCTL_SYNC and remove range information from struct dma_buf_sync.
v6 (Tiago): use __u64 structured padded flags instead enum. Adjust documentation about the recommendation on using sync ioctls.
v7 (Tiago): Alex' nit on flags definition and being even more wording in the doc about sync usage.
v9 (Tiago): remove useless is_dma_buf_file check. Fix sync.flags conditionals and its mask order check. Add <linux/types.h> include in dma-buf.h.
---
I left SYNC_START and SYNC_END exclusive, just how the logic was before. If we see an useful use case, maybe like the way David said, to store two frames next to each other in the same BO, we can patch up later fairly easily.
About the ioctl direction, just like Ville pointed, we're doing only copy_from_user at the moment and seems that _IOW is all we need. So I also didn't touch anything on that.
David, Ville PTAL. Thank you,
Tiago
Documentation/dma-buf-sharing.txt | 21 +++++++++++++++++- drivers/dma-buf/dma-buf.c | 45 +++++++++++++++++++++++++++++++++++++++ include/uapi/linux/dma-buf.h | 40 ++++++++++++++++++++++++++++++++++ 3 files changed, 105 insertions(+), 1 deletion(-) create mode 100644 include/uapi/linux/dma-buf.h
Documentation/dma-buf-sharing.txt +20 -1
@@ -350,7 +350,26 @@ Being able to mmap an export dma-buf buffer object has 2 main use-cases: handles, too). So it's beneficial to support this in a similar fashion on dma-buf to have a good transition path for existing Android userspace. - No special interfaces, userspace simply calls mmap on the dma-buf fd. + No special interfaces, userspace simply calls mmap on the dma-buf fd, making + sure that the cache synchronization ioctl (DMA_BUF_IOCTL_SYNC) is *always* + used when the access happens. This is discussed next paragraphs. + + Some systems might need some sort of cache coherency management e.g. when + CPU and GPU domains are being accessed through dma-buf at the same time. To + circumvent this problem there are begin/end coherency markers, that forward + directly to existing dma-buf device drivers vfunc hooks. Userspace can make + use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence + would be used like following: + - mmap dma-buf fd + - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write + to mmap area 3. SYNC_END ioctl. This can be repeated as often as you + want (with the new data being consumed by the GPU or say scanout device) + - munmap once you don't need the buffer any more + + Therefore, for correctness and optimal performance, systems with the memory + cache shared by the GPU and CPU i.e. the "coherent" and also the + "incoherent" are always required to use SYNC_START and SYNC_END before and + after, respectively, when accessing the mapped address. 2. Supporting existing mmap interfaces in importers
drivers/dma-buf/dma-buf.c +45 -0
62 lines not on this page · raw message
include/uapi/linux/dma-buf.h new file +40 -0
@@ -0,0 +1,40 @@ +/* +* Framework for buffer objects that can be shared across devices/subsystems. +* +* Copyright(C) 2015 Intel Ltd +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License version 2 as published by +* the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, but WITHOUT +* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +* more details. +* +* You should have received a copy of the GNU General Public License along with +* this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef _DMA_BUF_UAPI_H_ +#define _DMA_BUF_UAPI_H_ + +#include <linux/types.h> + +/* begin/end dma-buf functions used for userspace mmap. */ +struct dma_buf_sync { +__u64 flags; +}; + +#define DMA_BUF_SYNC_READ (1 << 0) +#define DMA_BUF_SYNC_WRITE (2 << 0) +#define DMA_BUF_SYNC_RW (DMA_BUF_SYNC_READ | DMA_BUF_SYNC_WRITE) +#define DMA_BUF_SYNC_START (0 << 2) +#define DMA_BUF_SYNC_END (1 << 2) +#define DMA_BUF_SYNC_VALID_FLAGS_MASK \ + (DMA_BUF_SYNC_RW | DMA_BUF_SYNC_END) + +#define DMA_BUF_BASE 'b' +#define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct dma_buf_sync) + +#endif
Signature · 6 lines
2.1.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v9] dma-buf: Add ioctls to allow userspace to flush
Hi
Quoted 35 lines · Tiago Vignatti
From: Daniel Vetter <[email protected]>
The userspace might need some sort of cache coherency management e.g. when CPU and GPU domains are being accessed through dma-buf at the same time. To circumvent this problem there are begin/end coherency markers, that forward directly to existing dma-buf device drivers vfunc hooks. Userspace can make use of those markers through the
DMA_BUF_IOCTL_SYNCioctl. The sequence would be used like following:
- mmap dma-buf fd
- for each drawing/upload cycle in CPU 1.SYNC_STARTioctl, 2. read/write to mmap area 3.SYNC_ENDioctl. This can be repeated as often as you want (with the new data being consumed by the GPU or say scanout device)
- munmap once you don't need the buffer any morev2 (Tiago): Fix header file type names (u64 ->
__u64)
v3 (Tiago): Add documentation. Use enumdma_buf_sync_flagsto the begin/end dma-buf functions. Check for overflows in start/length.
v4 (Tiago): use 2d regions for sync.
v5 (Tiago): forget about 2d regions (v4); use_IOWinDMA_BUF_IOCTL_SYNCand remove range information from structdma_buf_sync.
v6 (Tiago): use__u64structured padded flags instead enum. Adjust documentation about the recommendation on using sync ioctls.
v7 (Tiago): Alex' nit on flags definition and being even more wording in the doc about sync usage.
v9 (Tiago): remove uselessis_dma_buf_filecheck. Fix sync.flags conditionals and its mask order check. Add <linux/types.h> include indma-buf.h.Cc Ville Syrjälä <[email protected]>Cc David Herrmann <[email protected]>Cc Sumit Semwal <[email protected]>Reviewed-by Stéphane Marchesin <[email protected]>Signed-off-by Daniel Vetter <[email protected]>Signed-off-by Tiago Vignatti <[email protected]>---
Quoted 7 lines
I left
SYNC_STARTandSYNC_ENDexclusive, just how the logic was before. If we see an useful use case, maybe like the way David said, to store two frames next to each other in the same BO, we can patch up later fairly easily.About the ioctl direction, just like Ville pointed, we're doing only
copy_from_userat the moment and seems that_IOWis all we need. So I also didn't touch anything on that.
Fair enough.
All I have left are comments on coding-style, and I'll refrain from verbalizing them.. (gnah, it is so tempting).
Thanks!
David
Quoted 153 lines
Documentation/dma-buf-sharing.txt | 21 +++++++++++++++++- drivers/dma-buf/dma-buf.c | 45 +++++++++++++++++++++++++++++++++++++++ include/uapi/linux/dma-buf.h | 40 ++++++++++++++++++++++++++++++++++ 3 files changed, 105 insertions(+), 1 deletion(-) create mode 100644 include/uapi/linux/dma-buf.hDocumentation/dma-buf-sharing.txt +20
-1@@ -350,7 +350,26 @@ Being able to mmap an export dma-buf buffer object has 2 main use-cases: handles, too). So it's beneficial to support this in a similar fashion on dma-buf to have a good transition path for existing Android userspace. - No special interfaces, userspace simply calls mmap on the dma-buf fd. + No special interfaces, userspace simply calls mmap on the dma-buf fd, making + sure that the cache synchronization ioctl (DMA_BUF_IOCTL_SYNC) is *always* + used when the access happens. This is discussed next paragraphs. + + Some systems might need some sort of cache coherency management e.g. when + CPU and GPU domains are being accessed through dma-buf at the same time. To + circumvent this problem there are begin/end coherency markers, that forward + directly to existing dma-buf device drivers vfunc hooks. Userspace can make + use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence + would be used like following: + - mmap dma-buf fd + - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write + to mmap area 3. SYNC_END ioctl. This can be repeated as often as you + want (with the new data being consumed by the GPU or say scanout device) + - munmap once you don't need the buffer any more + + Therefore, for correctness and optimal performance, systems with the memory + cache shared by the GPU and CPU i.e. the "coherent" and also the + "incoherent" are always required to use SYNC_START and SYNC_END before and + after, respectively, when accessing the mapped address. 2. Supporting existing mmap interfaces in importersdrivers/dma-buf/dma-buf.c +45
-0@@ -34,6 +34,8 @@#include <linux/poll.h> #include <linux/reservation.h> +#include <uapi/linux/dma-buf.h> +static inline int is_dma_buf_file (struct file *);struct dma_buf_list {@@ -251,11 +253,54 @@ out:return events; } +static long dma_buf_ioctl (struct file *file, +unsigned int cmd,unsigned long arg) +{ +struct dma_buf *dmabuf; +struct dma_buf_sync sync; +enum dma_data_direction direction; + + dmabuf = file->private_data; + +switch (cmd) { +case DMA_BUF_IOCTL_SYNC : +if (copy_from_user (&sync, (void __user *) arg,sizeof (sync))) +return -EFAULT ; + +if (sync.flags & ~DMA_BUF_SYNC_VALID_FLAGS_MASK ) +return -EINVAL ; + +switch (sync.flags &DMA_BUF_SYNC_RW ) { +case DMA_BUF_SYNC_READ : + direction =DMA_FROM_DEVICE ; +break ; +case DMA_BUF_SYNC_WRITE : + direction =DMA_TO_DEVICE ; +break ; +case DMA_BUF_SYNC_RW : + direction =DMA_BIDIRECTIONAL ; +break ; +default : +return -EINVAL ; + } + +if (sync.flags &DMA_BUF_SYNC_END ) +dma_buf_end_cpu_access (dmabuf, direction); +else +dma_buf_begin_cpu_access (dmabuf, direction); + +return 0 ; +default : +return -ENOTTY ; + } +} +static const struct file_operations dma_buf_fops = { .release = dma_buf_release, .mmap = dma_buf_mmap_internal, .llseek = dma_buf_llseek, .poll = dma_buf_poll, + .unlocked_ioctl = dma_buf_ioctl, };/* include/uapi/linux/dma-buf.h new file +40
-1@@ -0,0 +1,40 @@ +/* +* Framework for buffer objects that can be shared across devices/subsystems. +* +* Copyright(C) 2015 Intel Ltd +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License version 2 as published by +* the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, but WITHOUT +* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +* more details. +* +* You should have received a copy of the GNU General Public License along with +* this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef _DMA_BUF_UAPI_H_ +#define _DMA_BUF_UAPI_H_ + +#include <linux/types.h> + +/* begin/end dma-buf functions used for userspace mmap. */ +struct dma_buf_sync { +__u64 flags; +}; + +#define DMA_BUF_SYNC_READ (1 << 0) +#define DMA_BUF_SYNC_WRITE (2 << 0) +#define DMA_BUF_SYNC_RW (DMA_BUF_SYNC_READ | DMA_BUF_SYNC_WRITE) +#define DMA_BUF_SYNC_START (0 << 2) +#define DMA_BUF_SYNC_END (1 << 2) +#define DMA_BUF_SYNC_VALID_FLAGS_MASK \ + (DMA_BUF_SYNC_RW | DMA_BUF_SYNC_END) + +#define DMA_BUF_BASE 'b' +#define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct dma_buf_sync) + +#endif --
Quoted 2 lines
2.1.4
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Daniel Vetter
AppliedRe: [PATCH v9] dma-buf: Add ioctls to allow userspace to flush
Quoted 47 lines · David Herrmann
Hi
Quoted 35 lines · Tiago Vignatti
From: Daniel Vetter <[email protected]>
The userspace might need some sort of cache coherency management e.g. when CPU and GPU domains are being accessed through dma-buf at the same time. To circumvent this problem there are begin/end coherency markers, that forward directly to existing dma-buf device drivers vfunc hooks. Userspace can make use of those markers through the
DMA_BUF_IOCTL_SYNCioctl. The sequence would be used like following:
- mmap dma-buf fd
- for each drawing/upload cycle in CPU 1.SYNC_STARTioctl, 2. read/write to mmap area 3.SYNC_ENDioctl. This can be repeated as often as you want (with the new data being consumed by the GPU or say scanout device)
- munmap once you don't need the buffer any morev2 (Tiago): Fix header file type names (u64 ->
__u64)
v3 (Tiago): Add documentation. Use enumdma_buf_sync_flagsto the begin/end dma-buf functions. Check for overflows in start/length.
v4 (Tiago): use 2d regions for sync.
v5 (Tiago): forget about 2d regions (v4); use_IOWinDMA_BUF_IOCTL_SYNCand remove range information from structdma_buf_sync.
v6 (Tiago): use__u64structured padded flags instead enum. Adjust documentation about the recommendation on using sync ioctls.
v7 (Tiago): Alex' nit on flags definition and being even more wording in the doc about sync usage.
v9 (Tiago): remove uselessis_dma_buf_filecheck. Fix sync.flags conditionals and its mask order check. Add <linux/types.h> include indma-buf.h.Cc Ville Syrjälä <[email protected]>Cc David Herrmann <[email protected]>Cc Sumit Semwal <[email protected]>Reviewed-by Stéphane Marchesin <[email protected]>Signed-off-by Daniel Vetter <[email protected]>Signed-off-by Tiago Vignatti <[email protected]>---
Quoted 7 lines
I left
SYNC_STARTandSYNC_ENDexclusive, just how the logic was before. If we see an useful use case, maybe like the way David said, to store two frames next to each other in the same BO, we can patch up later fairly easily.About the ioctl direction, just like Ville pointed, we're doing only
copy_from_userat the moment and seems that_IOWis all we need. So I also didn't touch anything on that.
Quoted 6 lines
Fair enough.
All I have left are comments on coding-style, and I'll refrain from verbalizing them.. (gnah, it is so tempting).
Reviewed-by David Herrmann <[email protected]>
Merged to drm-misc, thanks.
-Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v9] dma-buf: Add ioctls to allow userspace to flush
In reply to Tiago VignattiQuoted 25 lines · Tiago Vignatti
drivers/dma-buf/dma-buf.c +25
-0+static long dma_buf_ioctl (struct file *file, +unsigned int cmd,unsigned long arg) +{ +struct dma_buf *dmabuf; +struct dma_buf_sync sync; +enum dma_data_direction direction; + + dmabuf = file->private_data; + +switch (cmd) { +case DMA_BUF_IOCTL_SYNC : +if (copy_from_user (&sync, (void __user *) arg,sizeof (sync))) +return -EFAULT ; + +if (sync.flags & ~DMA_BUF_SYNC_VALID_FLAGS_MASK ) +return -EINVAL ; + +switch (sync.flags &DMA_BUF_SYNC_RW ) { +case DMA_BUF_SYNC_READ : + direction =DMA_FROM_DEVICE ; +break ; +case DMA_BUF_SYNC_WRITE : + direction =DMA_TO_DEVICE ; +break ; +case DMA_BUF_SYNC_RW :
drivers/dma-buf/dma-buf.c out: · line 290
Quoted 10 lines
drivers/dma-buf/dma-buf.c +10
-0+ direction =DMA_BIDIRECTIONAL ; +break ; +default : +return -EINVAL ; + } + +if (sync.flags &DMA_BUF_SYNC_END ) +dma_buf_end_cpu_access (dmabuf, direction); +else +dma_buf_begin_cpu_access (dmabuf, direction);
We forgot to report the error back to userspace. Might as well fixup the callchain to propagate error from end-cpu-access as well. Found after updating igt/gem_concurrent_blit to exercise dmabuf mmaps vs the GPU. -Chris
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v9] dma-buf: Add ioctls to allow userspace to flush
Quoted 32 lines · Chris Wilson
Quoted 31 lines · Tiago Vignatti
drivers/dma-buf/dma-buf.c +31
-0+static long dma_buf_ioctl (struct file *file, +unsigned int cmd,unsigned long arg) +{ +struct dma_buf *dmabuf; +struct dma_buf_sync sync; +enum dma_data_direction direction; + + dmabuf = file->private_data; + +switch (cmd) { +case DMA_BUF_IOCTL_SYNC : +if (copy_from_user (&sync, (void __user *) arg,sizeof (sync))) +return -EFAULT ; + +if (sync.flags & ~DMA_BUF_SYNC_VALID_FLAGS_MASK ) +return -EINVAL ; + +switch (sync.flags &DMA_BUF_SYNC_RW ) { +case DMA_BUF_SYNC_READ : + direction =DMA_FROM_DEVICE ; +break ; +case DMA_BUF_SYNC_WRITE : + direction =DMA_TO_DEVICE ; +break ; +case DMA_BUF_SYNC_RW : + direction =DMA_BIDIRECTIONAL ; +break ; +default : +return -EINVAL ; + } +
Quoted 8 lines
drivers/dma-buf/dma-buf.c out: · line 290
Quoted 4 lines
drivers/dma-buf/dma-buf.c +4
-0+if (sync.flags &DMA_BUF_SYNC_END ) +dma_buf_end_cpu_access (dmabuf, direction); +else +dma_buf_begin_cpu_access (dmabuf, direction);We forgot to report the error back to userspace. Might as well fixup the callchain to propagate error from end-cpu-access as well. Found after updating igt/gem_concurrent_blit to exercise dmabuf mmaps vs the GPU.
EINTR? Do we need to make this ABI - I guess so? Tiago, do you have patches? See drmIoctl() in libdrm for what's needed on the userspace side if my guess is right.
-Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v9] dma-buf: Add ioctls to allow userspace to flush
Quoted 42 lines · Daniel Vetter
Quoted 32 lines · Chris Wilson
Quoted 31 lines · Tiago Vignatti
drivers/dma-buf/dma-buf.c +31
-0+static long dma_buf_ioctl (struct file *file, +unsigned int cmd,unsigned long arg) +{ +struct dma_buf *dmabuf; +struct dma_buf_sync sync; +enum dma_data_direction direction; + + dmabuf = file->private_data; + +switch (cmd) { +case DMA_BUF_IOCTL_SYNC : +if (copy_from_user (&sync, (void __user *) arg,sizeof (sync))) +return -EFAULT ; + +if (sync.flags & ~DMA_BUF_SYNC_VALID_FLAGS_MASK ) +return -EINVAL ; + +switch (sync.flags &DMA_BUF_SYNC_RW ) { +case DMA_BUF_SYNC_READ : + direction =DMA_FROM_DEVICE ; +break ; +case DMA_BUF_SYNC_WRITE : + direction =DMA_TO_DEVICE ; +break ; +case DMA_BUF_SYNC_RW : + direction =DMA_BIDIRECTIONAL ; +break ; +default : +return -EINVAL ; + } +Quoted 8 lines
drivers/dma-buf/dma-buf.c out: · line 290
Quoted 4 lines
drivers/dma-buf/dma-buf.c +4
-0+if (sync.flags &DMA_BUF_SYNC_END ) +dma_buf_end_cpu_access (dmabuf, direction); +else +dma_buf_begin_cpu_access (dmabuf, direction);We forgot to report the error back to userspace. Might as well fixup the callchain to propagate error from end-cpu-access as well. Found after updating igt/gem_concurrent_blit to exercise dmabuf mmaps vs the GPU.
Quoted 3 lines
EINTR? Do we need to make this ABI - I guess so? Tiago, do you have patches? See
drmIoctl()in libdrm for what's needed on the userspace side if my guess is right.
EINTR is the easiest, but conceivably we could also get EIO and currently EAGAIN.
I am also seeing some strange timing dependent (i.e. valgrind doesn't show up anything client side and the tests then pass) failures (SIGSEGV, SIGBUS) with !llc.
-Chris
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v9] dma-buf: Add ioctls to allow userspace to flush
Quoted 47 lines · Chris Wilson
Quoted 42 lines · Daniel Vetter
Quoted 32 lines · Chris Wilson
Quoted 31 lines · Tiago Vignatti
drivers/dma-buf/dma-buf.c +31
-0+static long dma_buf_ioctl (struct file *file, +unsigned int cmd,unsigned long arg) +{ +struct dma_buf *dmabuf; +struct dma_buf_sync sync; +enum dma_data_direction direction; + + dmabuf = file->private_data; + +switch (cmd) { +case DMA_BUF_IOCTL_SYNC : +if (copy_from_user (&sync, (void __user *) arg,sizeof (sync))) +return -EFAULT ; + +if (sync.flags & ~DMA_BUF_SYNC_VALID_FLAGS_MASK ) +return -EINVAL ; + +switch (sync.flags &DMA_BUF_SYNC_RW ) { +case DMA_BUF_SYNC_READ : + direction =DMA_FROM_DEVICE ; +break ; +case DMA_BUF_SYNC_WRITE : + direction =DMA_TO_DEVICE ; +break ; +case DMA_BUF_SYNC_RW : + direction =DMA_BIDIRECTIONAL ; +break ; +default : +return -EINVAL ; + } +Quoted 8 lines
drivers/dma-buf/dma-buf.c out: · line 290
Quoted 4 lines
drivers/dma-buf/dma-buf.c +4
-0+if (sync.flags &DMA_BUF_SYNC_END ) +dma_buf_end_cpu_access (dmabuf, direction); +else +dma_buf_begin_cpu_access (dmabuf, direction);We forgot to report the error back to userspace. Might as well fixup the callchain to propagate error from end-cpu-access as well. Found after updating igt/gem_concurrent_blit to exercise dmabuf mmaps vs the GPU.
Quoted 3 lines
EINTR? Do we need to make this ABI - I guess so? Tiago, do you have patches? See
drmIoctl()in libdrm for what's needed on the userspace side if my guess is right.
Quoted 6 lines
EINTR is the easiest, but conceivably we could also get EIO and currently EAGAIN.
I am also seeing some strange timing dependent (i.e. valgrind doesn't show up anything client side and the tests then pass) failures (SIGSEGV, SIGBUS) with !llc.
Tiago, ping. Also probably a gap in igt coverage besides the kernel side. -Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v9] dma-buf: Add ioctls to allow userspace to flush
Quoted 51 lines · Daniel Vetter
Quoted 50 lines · Chris Wilson
Quoted 42 lines · Daniel Vetter
Quoted 32 lines · Chris Wilson
Quoted 31 lines · Tiago Vignatti
drivers/dma-buf/dma-buf.c +31
-0+static long dma_buf_ioctl (struct file *file, +unsigned int cmd,unsigned long arg) +{ +struct dma_buf *dmabuf; +struct dma_buf_sync sync; +enum dma_data_direction direction; + + dmabuf = file->private_data; + +switch (cmd) { +case DMA_BUF_IOCTL_SYNC : +if (copy_from_user (&sync, (void __user *) arg,sizeof (sync))) +return -EFAULT ; + +if (sync.flags & ~DMA_BUF_SYNC_VALID_FLAGS_MASK ) +return -EINVAL ; + +switch (sync.flags &DMA_BUF_SYNC_RW ) { +case DMA_BUF_SYNC_READ : + direction =DMA_FROM_DEVICE ; +break ; +case DMA_BUF_SYNC_WRITE : + direction =DMA_TO_DEVICE ; +break ; +case DMA_BUF_SYNC_RW : + direction =DMA_BIDIRECTIONAL ; +break ; +default : +return -EINVAL ; + } +Quoted 8 lines
drivers/dma-buf/dma-buf.c out: · line 290
Quoted 4 lines
drivers/dma-buf/dma-buf.c +4
-0+if (sync.flags &DMA_BUF_SYNC_END ) +dma_buf_end_cpu_access (dmabuf, direction); +else +dma_buf_begin_cpu_access (dmabuf, direction);We forgot to report the error back to userspace. Might as well fixup the callchain to propagate error from end-cpu-access as well. Found after updating igt/gem_concurrent_blit to exercise dmabuf mmaps vs the GPU.
Quoted 3 lines
EINTR? Do we need to make this ABI - I guess so? Tiago, do you have patches? See
drmIoctl()in libdrm for what's needed on the userspace side if my guess is right.EINTR is the easiest, but conceivably we could also get EIO and currently EAGAIN.
Quoted 6 lines
Quoted 3 lines
I am also seeing some strange timing dependent (i.e. valgrind doesn't show up anything client side and the tests then pass) failures (SIGSEGV, SIGBUS) with !llc.
Tiago, ping. Also probably a gap in igt coverage besides the kernel side. -Daniel
Hey guys! I'm back from vacation now. I'll take a look on it in the next days and then come back to you.
Tiago
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v9] dma-buf: Add ioctls to allow userspace to flush
Quoted 56 lines · Tiago Vignatti
Quoted 55 lines · Daniel Vetter
Quoted 53 lines · Chris Wilson
Quoted 42 lines · Daniel Vetter
Quoted 32 lines · Chris Wilson
Quoted 31 lines · Tiago Vignatti
drivers/dma-buf/dma-buf.c +31
-0+static long dma_buf_ioctl (struct file *file, +unsigned int cmd,unsigned long arg) +{ +struct dma_buf *dmabuf; +struct dma_buf_sync sync; +enum dma_data_direction direction; + + dmabuf = file->private_data; + +switch (cmd) { +case DMA_BUF_IOCTL_SYNC : +if (copy_from_user (&sync, (void __user *) arg,sizeof (sync))) +return -EFAULT ; + +if (sync.flags & ~DMA_BUF_SYNC_VALID_FLAGS_MASK ) +return -EINVAL ; + +switch (sync.flags &DMA_BUF_SYNC_RW ) { +case DMA_BUF_SYNC_READ : + direction =DMA_FROM_DEVICE ; +break ; +case DMA_BUF_SYNC_WRITE : + direction =DMA_TO_DEVICE ; +break ; +case DMA_BUF_SYNC_RW : + direction =DMA_BIDIRECTIONAL ; +break ; +default : +return -EINVAL ; + } +Quoted 8 lines
drivers/dma-buf/dma-buf.c out: · line 290
Quoted 4 lines
drivers/dma-buf/dma-buf.c +4
-0+if (sync.flags &DMA_BUF_SYNC_END ) +dma_buf_end_cpu_access (dmabuf, direction); +else +dma_buf_begin_cpu_access (dmabuf, direction);We forgot to report the error back to userspace. Might as well fixup the callchain to propagate error from end-cpu-access as well. Found after updating igt/gem_concurrent_blit to exercise dmabuf mmaps vs the GPU.
Quoted 3 lines
EINTR? Do we need to make this ABI - I guess so? Tiago, do you have patches? See
drmIoctl()in libdrm for what's needed on the userspace side if my guess is right.EINTR is the easiest, but conceivably we could also get EIO and currently EAGAIN.
I am also seeing some strange timing dependent (i.e. valgrind doesn't show up anything client side and the tests then pass) failures (SIGSEGV, SIGBUS) with !llc.
Quoted 5 lines
Quoted 2 lines
Tiago, ping. Also probably a gap in igt coverage besides the kernel side. -Daniel
Hey guys! I'm back from vacation now. I'll take a look on it in the next days and then come back to you.
An unpolished version:
https://cgit.freedesktop.org/~ickle/linux-2.6/commit/?h=breadcrumbs&id=b83483e87438f870d8209a44a1843235555a1d54
-Chris
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 1/1 prime_mmap_coherency: Add return error tests for prime sync ioctl
In reply to Tiago VignattiThis patch adds ioctl-errors subtest to be used for exercising prime sync ioctl errors.
The subtest constantly interrupts via signals a function doing concurrent blit to stress out the right usage of prime_sync_*, making sure these ioctl errors are handled accordingly. Important to note that in case of failure (e.g. in a case where the ioctl wouldn't try again in a return error) this test does not reliably catch the problem with 100% of accuracy.
---
Chris, your unpolished dma-buf patch for adding return error into the ioctl calls lgtm. Let me know if you think this kind of test is useful now in igt.
Thanks
Tiago
tests/prime_mmap_coherency.c | 87 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 87 insertions(+)
tests/prime_mmap_coherency.c +87 -0
@@ -180,6 +180,88 @@ static void test_write_flush(bool expect_stale_cache)munmap (ptr_cpu, width * height); } +static void blit_and_cmp (void ) +{ +drm_intel_bo *bo_1; +drm_intel_bo *bo_2; +uint32_t *ptr_cpu; +uint32_t *ptr2_cpu; +int dma_buf_fd, dma_buf2_fd, i; +int local_fd; +drm_intel_bufmgr *local_bufmgr; +struct intel_batchbuffer *local_batch; + +/* recreate process local variables */ + local_fd =drm_open_driver (DRIVER_INTEL ); + local_bufmgr =drm_intel_bufmgr_gem_init (local_fd,4096 ); +igt_assert (local_bufmgr); + + local_batch =intel_batchbuffer_alloc (local_bufmgr,intel_get_drm_devid (local_fd)); +igt_assert (local_batch); + + bo_1 =drm_intel_bo_alloc (local_bufmgr,"BO 1" , width * height *4 ,4096 ); + dma_buf_fd =prime_handle_to_fd_for_mmap (local_fd, bo_1->handle); +igt_skip_on (errno ==EINVAL ); + + ptr_cpu =mmap (NULL , width * height,PROT_READ |PROT_WRITE , +MAP_SHARED , dma_buf_fd,0 ); +igt_assert (ptr_cpu !=MAP_FAILED ); + + bo_2 =drm_intel_bo_alloc (local_bufmgr,"BO 2" , width * height *4 ,4096 ); + dma_buf2_fd =prime_handle_to_fd_for_mmap (local_fd, bo_2->handle); + + ptr2_cpu =mmap (NULL , width * height,PROT_READ |PROT_WRITE , +MAP_SHARED , dma_buf2_fd,0 ); +igt_assert (ptr2_cpu !=MAP_FAILED ); + +/* Fill up BO 1 with '1's and BO 2 with '0's */ +prime_sync_start (dma_buf_fd, true); +memset (ptr_cpu,0x11 , width * height); +prime_sync_end (dma_buf_fd, true); + +prime_sync_start (dma_buf2_fd, true); +memset (ptr2_cpu,0x00 , width * height); +prime_sync_end (dma_buf2_fd, true); + +/* Copy BO 1 into BO 2, using blitter. */ +intel_copy_bo (local_batch, bo_2, bo_1, width * height); +usleep (0 );/* let someone else claim the mutex */ + +/* Compare BOs. If prime_sync_* were executed properly, the caches +* should be synced. */ +prime_sync_start (dma_buf2_fd, true); +for (i =0 ; i < (width * height) /4 ; i++) +igt_fail_on_f (ptr2_cpu[i] !=0x11111111 ,"Found 0x%08x at offset 0x%08x\n" , ptr2_cpu[i], i); +prime_sync_end (dma_buf2_fd, true); + +drm_intel_bo_unreference (bo_1); +drm_intel_bo_unreference (bo_2); +munmap (ptr_cpu, width * height); +munmap (ptr2_cpu, width * height); +} + +/* +* Constantly interrupt concurrent blits to stress out prime_sync_* and make +* sure these ioctl errors are handled accordingly. +* +* Important to note that in case of failure (e.g. in a case where the ioctl +* wouldn't try again in a return error) this test does not reliably catch the +* problem with 100% of accuracy. +*/ +static void test_ioctl_errors (void ) +{ +int i; +int num_children =8 *sysconf (_SC_NPROCESSORS_ONLN); + +igt_fork_signal_helper (); + igt_fork(child, num_children) { +for (i =0 ; i <ROUNDS ; i++) +blit_and_cmp (); + } +igt_waitchildren (); +igt_stop_signal_helper (); +} +int main (int argc,char **argv) {int i;
@@ -235,6 +317,11 @@ int main(int argc, char **argv)igt_fail_on_f (!stale,"couldn't find any stale cache lines\n" ); } + igt_subtest("ioctl-errors") { +igt_info ("exercising concurrent blit to get ioctl errors\n" ); +test_ioctl_errors (); + } + igt_fixture {intel_batchbuffer_free (batch);drm_intel_bufmgr_destroy (bufmgr);
Signature · 6 lines
2.1.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH] prime_mmap_coherency: Add return error tests for prime sync ioctl
Quoted 71 lines · Tiago Vignatti
This patch adds ioctl-errors subtest to be used for exercising prime sync ioctl errors.
The subtest constantly interrupts via signals a function doing concurrent blit to stress out the right usage of prime_sync_*, making sure these ioctl errors are handled accordingly. Important to note that in case of failure (e.g. in a case where the ioctl wouldn't try again in a return error) this test does not reliably catch the problem with 100% of accuracy.
Cc Chris Wilson <[email protected]>Signed-off-by Tiago Vignatti <[email protected]>---
Chris, your unpolished dma-buf patch for adding return error into the ioctl calls lgtm. Let me know if you think this kind of test is useful now in igt.
Thanks
Tiago
tests/prime_mmap_coherency.c | 87 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 87 insertions(+)tests/prime_mmap_coherency.c +40
-0@@ -180,6 +180,88 @@ static void test_write_flush(bool expect_stale_cache)munmap (ptr_cpu, width * height); } +static void blit_and_cmp (void ) +{ +drm_intel_bo *bo_1; +drm_intel_bo *bo_2; +uint32_t *ptr_cpu; +uint32_t *ptr2_cpu; +int dma_buf_fd, dma_buf2_fd, i; +int local_fd; +drm_intel_bufmgr *local_bufmgr; +struct intel_batchbuffer *local_batch; + +/* recreate process local variables */ + local_fd =drm_open_driver (DRIVER_INTEL ); + local_bufmgr =drm_intel_bufmgr_gem_init (local_fd,4096 ); +igt_assert (local_bufmgr); + + local_batch =intel_batchbuffer_alloc (local_bufmgr,intel_get_drm_devid (local_fd)); +igt_assert (local_batch); + + bo_1 =drm_intel_bo_alloc (local_bufmgr,"BO 1" , width * height *4 ,4096 ); + dma_buf_fd =prime_handle_to_fd_for_mmap (local_fd, bo_1->handle); +igt_skip_on (errno ==EINVAL ); + + ptr_cpu =mmap (NULL , width * height,PROT_READ |PROT_WRITE , +MAP_SHARED , dma_buf_fd,0 ); +igt_assert (ptr_cpu !=MAP_FAILED ); + + bo_2 =drm_intel_bo_alloc (local_bufmgr,"BO 2" , width * height *4 ,4096 ); + dma_buf2_fd =prime_handle_to_fd_for_mmap (local_fd, bo_2->handle); + + ptr2_cpu =mmap (NULL , width * height,PROT_READ |PROT_WRITE , +MAP_SHARED , dma_buf2_fd,0 ); +igt_assert (ptr2_cpu !=MAP_FAILED ); + +/* Fill up BO 1 with '1's and BO 2 with '0's */ +prime_sync_start (dma_buf_fd, true); +memset (ptr_cpu,0x11 , width * height); +prime_sync_end (dma_buf_fd, true); + +prime_sync_start (dma_buf2_fd, true);
tests/prime_mmap_coherency.c static void test_write_flush(bool expect_stale_cache) · line 232
Quoted 10 lines
tests/prime_mmap_coherency.c +10
-0+memset (ptr2_cpu,0x00 , width * height); +prime_sync_end (dma_buf2_fd, true); + +/* Copy BO 1 into BO 2, using blitter. */ +intel_copy_bo (local_batch, bo_2, bo_1, width * height); +usleep (0 );/* let someone else claim the mutex */ + +/* Compare BOs. If prime_sync_* were executed properly, the caches +* should be synced. */ +prime_sync_start (dma_buf2_fd, true);
Maybe false here? Note that it makes any difference for the driver atm.
tests/prime_mmap_coherency.c static void test_write_flush(bool expect_stale_cache) · line 240
Quoted 8 lines
tests/prime_mmap_coherency.c +8
-0+for (i =0 ; i < (width * height) /4 ; i++) +igt_fail_on_f (ptr2_cpu[i] !=0x11111111 ,"Found 0x%08x at offset 0x%08x\n" , ptr2_cpu[i], i); +prime_sync_end (dma_buf2_fd, true); + +drm_intel_bo_unreference (bo_1); +drm_intel_bo_unreference (bo_2); +munmap (ptr_cpu, width * height); +munmap (ptr2_cpu, width * height);
Do we have anything that verifies that dmabuf maps persist beyond gem_close() on the original bo?
Yes, that test should hit all interruptible paths we have in dmabuf and would be a great addition to igt.
-Chris
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH] prime_mmap_coherency: Add return error tests for prime sync ioctl
Quoted 76 lines · Chris Wilson
Quoted 75 lines · Tiago Vignatti
This patch adds ioctl-errors subtest to be used for exercising prime sync ioctl errors.
The subtest constantly interrupts via signals a function doing concurrent blit to stress out the right usage of prime_sync_*, making sure these ioctl errors are handled accordingly. Important to note that in case of failure (e.g. in a case where the ioctl wouldn't try again in a return error) this test does not reliably catch the problem with 100% of accuracy.
Cc Chris Wilson <[email protected]>Signed-off-by Tiago Vignatti <[email protected]>---
Chris, your unpolished dma-buf patch for adding return error into the ioctl calls lgtm. Let me know if you think this kind of test is useful now in igt.
Thanks
Tiago
tests/prime_mmap_coherency.c | 87 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 87 insertions(+)tests/prime_mmap_coherency.c +44
-0@@ -180,6 +180,88 @@ static void test_write_flush(bool expect_stale_cache)munmap (ptr_cpu, width * height); } +static void blit_and_cmp (void ) +{ +drm_intel_bo *bo_1; +drm_intel_bo *bo_2; +uint32_t *ptr_cpu; +uint32_t *ptr2_cpu; +int dma_buf_fd, dma_buf2_fd, i; +int local_fd; +drm_intel_bufmgr *local_bufmgr; +struct intel_batchbuffer *local_batch; + +/* recreate process local variables */ + local_fd =drm_open_driver (DRIVER_INTEL ); + local_bufmgr =drm_intel_bufmgr_gem_init (local_fd,4096 ); +igt_assert (local_bufmgr); + + local_batch =intel_batchbuffer_alloc (local_bufmgr,intel_get_drm_devid (local_fd)); +igt_assert (local_batch); + + bo_1 =drm_intel_bo_alloc (local_bufmgr,"BO 1" , width * height *4 ,4096 ); + dma_buf_fd =prime_handle_to_fd_for_mmap (local_fd, bo_1->handle); +igt_skip_on (errno ==EINVAL ); + + ptr_cpu =mmap (NULL , width * height,PROT_READ |PROT_WRITE , +MAP_SHARED , dma_buf_fd,0 ); +igt_assert (ptr_cpu !=MAP_FAILED ); + + bo_2 =drm_intel_bo_alloc (local_bufmgr,"BO 2" , width * height *4 ,4096 ); + dma_buf2_fd =prime_handle_to_fd_for_mmap (local_fd, bo_2->handle); + + ptr2_cpu =mmap (NULL , width * height,PROT_READ |PROT_WRITE , +MAP_SHARED , dma_buf2_fd,0 ); +igt_assert (ptr2_cpu !=MAP_FAILED ); + +/* Fill up BO 1 with '1's and BO 2 with '0's */ +prime_sync_start (dma_buf_fd, true); +memset (ptr_cpu,0x11 , width * height); +prime_sync_end (dma_buf_fd, true); + +prime_sync_start (dma_buf2_fd, true); +memset (ptr2_cpu,0x00 , width * height); +prime_sync_end (dma_buf2_fd, true); + +/* Copy BO 1 into BO 2, using blitter. */
Quoted 8 lines
tests/prime_mmap_coherency.c static void test_write_flush(bool expect_stale_cache) · line 232
Quoted 6 lines
tests/prime_mmap_coherency.c +6
-0+intel_copy_bo (local_batch, bo_2, bo_1, width * height); +usleep (0 );/* let someone else claim the mutex */ + +/* Compare BOs. If prime_sync_* were executed properly, the caches +* should be synced. */ +prime_sync_start (dma_buf2_fd, true);Maybe false here? Note that it makes any difference for the driver atm.
oh, my bad.
Quoted 11 lines
tests/prime_mmap_coherency.c static void test_write_flush(bool expect_stale_cache) · line 240
Quoted 8 lines
tests/prime_mmap_coherency.c +8
-0+for (i =0 ; i < (width * height) /4 ; i++) +igt_fail_on_f (ptr2_cpu[i] !=0x11111111 ,"Found 0x%08x at offset 0x%08x\n" , ptr2_cpu[i], i); +prime_sync_end (dma_buf2_fd, true); + +drm_intel_bo_unreference (bo_1); +drm_intel_bo_unreference (bo_2); +munmap (ptr_cpu, width * height); +munmap (ptr2_cpu, width * height);Do we have anything that verifies that dmabuf maps persist beyond
gem_close()on the original bo?
that's test_refcounting in prime_mmap.c
Quoted 2 lines
Yes, that test should hit all interruptible paths we have in dmabuf and would be a great addition to igt.
cool, thanks. I'm resending now v2.
Tiago
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 1/1 prime_mmap_coherency: Add return error tests for prime sync ioctl
In reply to Chris WilsonThis patch adds ioctl-errors subtest to be used for exercising prime sync ioctl errors.
The subtest constantly interrupts via signals a function doing concurrent blit to stress out the right usage of prime_sync_*, making sure these ioctl errors are handled accordingly. Important to note that in case of failure (e.g. in a case where the ioctl wouldn't try again in a return error) this test does not reliably catch the problem with 100% of accuracy.
v2: fix prime sync direction when reading mmap'ed file.
--- tests/prime_mmap_coherency.c | 87 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 87 insertions(+)
tests/prime_mmap_coherency.c +87 -0
@@ -180,6 +180,88 @@ static void test_write_flush(bool expect_stale_cache)munmap (ptr_cpu, width * height); } +static void blit_and_cmp (void ) +{ +drm_intel_bo *bo_1; +drm_intel_bo *bo_2; +uint32_t *ptr_cpu; +uint32_t *ptr2_cpu; +int dma_buf_fd, dma_buf2_fd, i; +int local_fd; +drm_intel_bufmgr *local_bufmgr; +struct intel_batchbuffer *local_batch; + +/* recreate process local variables */ + local_fd =drm_open_driver (DRIVER_INTEL ); + local_bufmgr =drm_intel_bufmgr_gem_init (local_fd,4096 ); +igt_assert (local_bufmgr); + + local_batch =intel_batchbuffer_alloc (local_bufmgr,intel_get_drm_devid (local_fd)); +igt_assert (local_batch); + + bo_1 =drm_intel_bo_alloc (local_bufmgr,"BO 1" , width * height *4 ,4096 ); + dma_buf_fd =prime_handle_to_fd_for_mmap (local_fd, bo_1->handle); +igt_skip_on (errno ==EINVAL ); + + ptr_cpu =mmap (NULL , width * height,PROT_READ |PROT_WRITE , +MAP_SHARED , dma_buf_fd,0 ); +igt_assert (ptr_cpu !=MAP_FAILED ); + + bo_2 =drm_intel_bo_alloc (local_bufmgr,"BO 2" , width * height *4 ,4096 ); + dma_buf2_fd =prime_handle_to_fd_for_mmap (local_fd, bo_2->handle); + + ptr2_cpu =mmap (NULL , width * height,PROT_READ |PROT_WRITE , +MAP_SHARED , dma_buf2_fd,0 ); +igt_assert (ptr2_cpu !=MAP_FAILED ); + +/* Fill up BO 1 with '1's and BO 2 with '0's */ +prime_sync_start (dma_buf_fd, true); +memset (ptr_cpu,0x11 , width * height); +prime_sync_end (dma_buf_fd, true); + +prime_sync_start (dma_buf2_fd, true); +memset (ptr2_cpu,0x00 , width * height); +prime_sync_end (dma_buf2_fd, true); + +/* Copy BO 1 into BO 2, using blitter. */ +intel_copy_bo (local_batch, bo_2, bo_1, width * height); +usleep (0 );/* let someone else claim the mutex */ + +/* Compare BOs. If prime_sync_* were executed properly, the caches +* should be synced. */ +prime_sync_start (dma_buf2_fd, false); +for (i =0 ; i < (width * height) /4 ; i++) +igt_fail_on_f (ptr2_cpu[i] !=0x11111111 ,"Found 0x%08x at offset 0x%08x\n" , ptr2_cpu[i], i); +prime_sync_end (dma_buf2_fd, false); + +drm_intel_bo_unreference (bo_1); +drm_intel_bo_unreference (bo_2); +munmap (ptr_cpu, width * height); +munmap (ptr2_cpu, width * height); +} + +/* +* Constantly interrupt concurrent blits to stress out prime_sync_* and make +* sure these ioctl errors are handled accordingly. +* +* Important to note that in case of failure (e.g. in a case where the ioctl +* wouldn't try again in a return error) this test does not reliably catch the +* problem with 100% of accuracy. +*/ +static void test_ioctl_errors (void ) +{ +int i; +int num_children =8 *sysconf (_SC_NPROCESSORS_ONLN); + +igt_fork_signal_helper (); + igt_fork(child, num_children) { +for (i =0 ; i <ROUNDS ; i++) +blit_and_cmp (); + } +igt_waitchildren (); +igt_stop_signal_helper (); +} +int main (int argc,char **argv) {int i;
@@ -235,6 +317,11 @@ int main(int argc, char **argv)igt_fail_on_f (!stale,"couldn't find any stale cache lines\n" ); } + igt_subtest("ioctl-errors") { +igt_info ("exercising concurrent blit to get ioctl errors\n" ); +test_ioctl_errors (); + } + igt_fixture {intel_batchbuffer_free (batch);drm_intel_bufmgr_destroy (bufmgr);
Signature · 6 lines
2.1.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v2] prime_mmap_coherency: Add return error tests for prime sync ioctl
tests/prime_mmap_coherency.c static void test_write_flush(bool expect_stale_cache) · line 257
Quoted 7 lines · Tiago Vignatti
tests/prime_mmap_coherency.c +7
-0+static void test_ioctl_errors (void ) +{ +int i; +int num_children =8 *sysconf (_SC_NPROCESSORS_ONLN); + +igt_fork_signal_helper (); + igt_fork(child, num_children) {
Actually there is a danger here in only using a fork-bomb, we may loose out on signal interruptions due to busyspins on the mutex (i.e. the contention hiding critical paths, since we crucially rely on timing).
For fun, I would use:
int ncpus = sysconf(_SC_NPROCESSORS_ONLN);
int num_children;
igt_fork_signal_helper();
for (int num_children = 1; num_children <= 8 *ncpus; num_children <<= 1) {
igt_fork(child, num_children) {
struct timespec start = {};
while (igt_seconds_elapsed(&start) <= num_children)
blit_and_cmp();
}
}igt_waitchildren();igt_stop_signal_helper();
-Chris
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH v2] prime_mmap_coherency: Add return error tests for prime sync ioctl
Quoted 19 lines · Chris Wilson
tests/prime_mmap_coherency.c static void test_write_flush(bool expect_stale_cache) · line 257
Quoted 7 lines · Tiago Vignatti
tests/prime_mmap_coherency.c +7
-0+static void test_ioctl_errors (void ) +{ +int i; +int num_children =8 *sysconf (_SC_NPROCESSORS_ONLN); + +igt_fork_signal_helper (); + igt_fork(child, num_children) {Actually there is a danger here in only using a fork-bomb, we may loose out on signal interruptions due to busyspins on the mutex (i.e. the contention hiding critical paths, since we crucially rely on timing).
For fun, I would use:
int ncpus =
sysconf(_SC_NPROCESSORS_ONLN);
intnum_children;
igt_fork_signal_helper();
Quoted 8 lines
for (int num_children = 1; num_children <= 8 *ncpus; num_children <<= 1) { igt_fork(child, num_children) { struct timespec start = {}; while (igt_seconds_elapsed(&start) <= num_children) blit_and_cmp(); } }
igt_waitchildren();
With the bug ofc!
-Chris
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v3 1/1 prime_mmap_coherency: Add return error tests for prime sync ioctl
In reply to Chris WilsonThis patch adds ioctl-errors subtest to be used for exercising prime sync ioctl errors.
The subtest constantly interrupts via signals a function doing concurrent blit to stress out the right usage of prime_sync_*, making sure these ioctl errors are handled accordingly. Important to note that in case of failure (e.g. in a case where the ioctl wouldn't try again in a return error) this test does not reliably catch the problem with 100% of accuracy.
v2: fix prime sync direction when reading mmap'ed file.
v3: change the upper bound using time rather than loops
--- tests/prime_mmap_coherency.c | 89 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 89 insertions(+)
tests/prime_mmap_coherency.c +89 -0
@@ -180,6 +180,90 @@ static void test_write_flush(bool expect_stale_cache)munmap (ptr_cpu, width * height); } +static void blit_and_cmp (void ) +{ +drm_intel_bo *bo_1; +drm_intel_bo *bo_2; +uint32_t *ptr_cpu; +uint32_t *ptr2_cpu; +int dma_buf_fd, dma_buf2_fd, i; +int local_fd; +drm_intel_bufmgr *local_bufmgr; +struct intel_batchbuffer *local_batch; + +/* recreate process local variables */ + local_fd =drm_open_driver (DRIVER_INTEL ); + local_bufmgr =drm_intel_bufmgr_gem_init (local_fd,4096 ); +igt_assert (local_bufmgr); + + local_batch =intel_batchbuffer_alloc (local_bufmgr,intel_get_drm_devid (local_fd)); +igt_assert (local_batch); + + bo_1 =drm_intel_bo_alloc (local_bufmgr,"BO 1" , width * height *4 ,4096 ); + dma_buf_fd =prime_handle_to_fd_for_mmap (local_fd, bo_1->handle); +igt_skip_on (errno ==EINVAL ); + + ptr_cpu =mmap (NULL , width * height,PROT_READ |PROT_WRITE , +MAP_SHARED , dma_buf_fd,0 ); +igt_assert (ptr_cpu !=MAP_FAILED ); + + bo_2 =drm_intel_bo_alloc (local_bufmgr,"BO 2" , width * height *4 ,4096 ); + dma_buf2_fd =prime_handle_to_fd_for_mmap (local_fd, bo_2->handle); + + ptr2_cpu =mmap (NULL , width * height,PROT_READ |PROT_WRITE , +MAP_SHARED , dma_buf2_fd,0 ); +igt_assert (ptr2_cpu !=MAP_FAILED ); + +/* Fill up BO 1 with '1's and BO 2 with '0's */ +prime_sync_start (dma_buf_fd, true); +memset (ptr_cpu,0x11 , width * height); +prime_sync_end (dma_buf_fd, true); + +prime_sync_start (dma_buf2_fd, true); +memset (ptr2_cpu,0x00 , width * height); +prime_sync_end (dma_buf2_fd, true); + +/* Copy BO 1 into BO 2, using blitter. */ +intel_copy_bo (local_batch, bo_2, bo_1, width * height); +usleep (0 );/* let someone else claim the mutex */ + +/* Compare BOs. If prime_sync_* were executed properly, the caches +* should be synced. */ +prime_sync_start (dma_buf2_fd, false); +for (i =0 ; i < (width * height) /4 ; i++) +igt_fail_on_f (ptr2_cpu[i] !=0x11111111 ,"Found 0x%08x at offset 0x%08x\n" , ptr2_cpu[i], i); +prime_sync_end (dma_buf2_fd, false); + +drm_intel_bo_unreference (bo_1); +drm_intel_bo_unreference (bo_2); +munmap (ptr_cpu, width * height); +munmap (ptr2_cpu, width * height); +} + +/* +* Constantly interrupt concurrent blits to stress out prime_sync_* and make +* sure these ioctl errors are handled accordingly. +* +* Important to note that in case of failure (e.g. in a case where the ioctl +* wouldn't try again in a return error) this test does not reliably catch the +* problem with 100% of accuracy. +*/ +static void test_ioctl_errors (void ) +{ +int ncpus =sysconf (_SC_NPROCESSORS_ONLN); + +igt_fork_signal_helper (); +for (int num_children =1 ; num_children <=8 *ncpus; num_children <<=1 ) { + igt_fork(child, num_children) { +struct timespec start = {}; +while (igt_nsec_elapsed (&start) <= num_children) +blit_and_cmp (); + } +igt_waitchildren (); + } +igt_stop_signal_helper (); +} +int main (int argc,char **argv) {int i;
@@ -235,6 +319,11 @@ int main(int argc, char **argv)igt_fail_on_f (!stale,"couldn't find any stale cache lines\n" ); } + igt_subtest("ioctl-errors") { +igt_info ("exercising concurrent blit to get ioctl errors\n" ); +test_ioctl_errors (); + } + igt_fixture {intel_batchbuffer_free (batch);drm_intel_bufmgr_destroy (bufmgr);
Signature · 6 lines
2.1.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v3] prime_mmap_coherency: Add return error tests for prime sync ioctl
Quoted 9 lines · Tiago Vignatti
This patch adds ioctl-errors subtest to be used for exercising prime sync ioctl errors.
The subtest constantly interrupts via signals a function doing concurrent blit to stress out the right usage of prime_sync_*, making sure these ioctl errors are handled accordingly. Important to note that in case of failure (e.g. in a case where the ioctl wouldn't try again in a return error) this test does not reliably catch the problem with 100% of accuracy.
Quoted 5 lines
v2: fix prime sync direction when reading mmap'ed file.
v3: change the upper bound using time rather than loopsCc Chris Wilson <[email protected]>Signed-off-by Tiago Vignatti <[email protected]>
I'm probably blind, but where is the reviewed kernel patch for this? If it's somewhere hidden, please resubmit with all the whizzbang stuff needed for merging added ;-)
Thanks, Daniel
Quoted 114 lines
--- tests/prime_mmap_coherency.c | 89 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 89 insertions(+)tests/prime_mmap_coherency.c +89
-0@@ -180,6 +180,90 @@ static void test_write_flush(bool expect_stale_cache)munmap (ptr_cpu, width * height); } +static void blit_and_cmp (void ) +{ +drm_intel_bo *bo_1; +drm_intel_bo *bo_2; +uint32_t *ptr_cpu; +uint32_t *ptr2_cpu; +int dma_buf_fd, dma_buf2_fd, i; +int local_fd; +drm_intel_bufmgr *local_bufmgr; +struct intel_batchbuffer *local_batch; + +/* recreate process local variables */ + local_fd =drm_open_driver (DRIVER_INTEL ); + local_bufmgr =drm_intel_bufmgr_gem_init (local_fd,4096 ); +igt_assert (local_bufmgr); + + local_batch =intel_batchbuffer_alloc (local_bufmgr,intel_get_drm_devid (local_fd)); +igt_assert (local_batch); + + bo_1 =drm_intel_bo_alloc (local_bufmgr,"BO 1" , width * height *4 ,4096 ); + dma_buf_fd =prime_handle_to_fd_for_mmap (local_fd, bo_1->handle); +igt_skip_on (errno ==EINVAL ); + + ptr_cpu =mmap (NULL , width * height,PROT_READ |PROT_WRITE , +MAP_SHARED , dma_buf_fd,0 ); +igt_assert (ptr_cpu !=MAP_FAILED ); + + bo_2 =drm_intel_bo_alloc (local_bufmgr,"BO 2" , width * height *4 ,4096 ); + dma_buf2_fd =prime_handle_to_fd_for_mmap (local_fd, bo_2->handle); + + ptr2_cpu =mmap (NULL , width * height,PROT_READ |PROT_WRITE , +MAP_SHARED , dma_buf2_fd,0 ); +igt_assert (ptr2_cpu !=MAP_FAILED ); + +/* Fill up BO 1 with '1's and BO 2 with '0's */ +prime_sync_start (dma_buf_fd, true); +memset (ptr_cpu,0x11 , width * height); +prime_sync_end (dma_buf_fd, true); + +prime_sync_start (dma_buf2_fd, true); +memset (ptr2_cpu,0x00 , width * height); +prime_sync_end (dma_buf2_fd, true); + +/* Copy BO 1 into BO 2, using blitter. */ +intel_copy_bo (local_batch, bo_2, bo_1, width * height); +usleep (0 );/* let someone else claim the mutex */ + +/* Compare BOs. If prime_sync_* were executed properly, the caches +* should be synced. */ +prime_sync_start (dma_buf2_fd, false); +for (i =0 ; i < (width * height) /4 ; i++) +igt_fail_on_f (ptr2_cpu[i] !=0x11111111 ,"Found 0x%08x at offset 0x%08x\n" , ptr2_cpu[i], i); +prime_sync_end (dma_buf2_fd, false); + +drm_intel_bo_unreference (bo_1); +drm_intel_bo_unreference (bo_2); +munmap (ptr_cpu, width * height); +munmap (ptr2_cpu, width * height); +} + +/* +* Constantly interrupt concurrent blits to stress out prime_sync_* and make +* sure these ioctl errors are handled accordingly. +* +* Important to note that in case of failure (e.g. in a case where the ioctl +* wouldn't try again in a return error) this test does not reliably catch the +* problem with 100% of accuracy. +*/ +static void test_ioctl_errors (void ) +{ +int ncpus =sysconf (_SC_NPROCESSORS_ONLN); + +igt_fork_signal_helper (); +for (int num_children =1 ; num_children <=8 *ncpus; num_children <<=1 ) { + igt_fork(child, num_children) { +struct timespec start = {}; +while (igt_nsec_elapsed (&start) <= num_children) +blit_and_cmp (); + } +igt_waitchildren (); + } +igt_stop_signal_helper (); +} +int main (int argc,char **argv) {int i;@@ -235,6 +319,11 @@ int main(int argc, char **argv)igt_fail_on_f (!stale,"couldn't find any stale cache lines\n" ); } + igt_subtest("ioctl-errors") { +igt_info ("exercising concurrent blit to get ioctl errors\n" ); +test_ioctl_errors (); + } + igt_fixture {intel_batchbuffer_free (batch);drm_intel_bufmgr_destroy (bufmgr);Signature · 1 line
2.1.4
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v3] prime_mmap_coherency: Add return error tests for prime sync ioctl
Quoted 13 lines · Daniel Vetter
Quoted 12 lines · Tiago Vignatti
This patch adds ioctl-errors subtest to be used for exercising prime sync ioctl errors.
The subtest constantly interrupts via signals a function doing concurrent blit to stress out the right usage of prime_sync_*, making sure these ioctl errors are handled accordingly. Important to note that in case of failure (e.g. in a case where the ioctl wouldn't try again in a return error) this test does not reliably catch the problem with 100% of accuracy.
v2: fix prime sync direction when reading mmap'ed file.
v3: change the upper bound using time rather than loops
Quoted 8 lines
Quoted 2 lines
Cc Chris Wilson <[email protected]>Signed-off-by Tiago Vignatti <[email protected]>I'm probably blind, but where is the reviewed kernel patch for this? If it's somewhere hidden, please resubmit with all the whizzbang stuff needed for merging added ;-)
Thanks, Daniel
You're not blind Daniel :) Chris will be sending the kernel side but regardless this igt test should be good to go even without the kernel patch.
Tiago
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v3] prime_mmap_coherency: Add return error tests for prime sync ioctl
In reply to Tiago VignattiQuoted 15 lines · Tiago Vignatti
This patch adds ioctl-errors subtest to be used for exercising prime sync ioctl errors.
The subtest constantly interrupts via signals a function doing concurrent blit to stress out the right usage of prime_sync_*, making sure these ioctl errors are handled accordingly. Important to note that in case of failure (e.g. in a case where the ioctl wouldn't try again in a return error) this test does not reliably catch the problem with 100% of accuracy.
v2: fix prime sync direction when reading mmap'ed file.
v3: change the upper bound using time rather than loopsCc Chris Wilson <[email protected]>Signed-off-by Tiago Vignatti <[email protected]>---
tests/prime_mmap_coherency.c static void test_write_flush(bool expect_stale_cache) · line 256
Quoted 6 lines
tests/prime_mmap_coherency.c +6
-0+static void test_ioctl_errors (void ) +{ +int ncpus =sysconf (_SC_NPROCESSORS_ONLN); + +igt_fork_signal_helper (); +for (int num_children =1 ; num_children <=8 *ncpus; num_children <<=1 ) {
Hmm, that's a lot of buffers....
I'm going to stick a couple of intel_require_memmory and intel_check_memory() here.
Wait that's no moon. Oops, give me back my swap!
tests/prime_mmap_coherency.c static void test_write_flush(bool expect_stale_cache) · line 259
Quoted 3 lines
tests/prime_mmap_coherency.c +3
-0+ igt_fork(child, num_children) { +struct timespec start = {}; +while (igt_nsec_elapsed (&start) <= num_children)
igt_nsec_elapsed().... Barely any time at all!
Presumed you wanted seconds, fixed the memleak and pushed. Thanks,
-Chris
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v7 4/5 drm/i915: Implement end_cpu_access
In reply to Tiago VignattiThis function is meant to be used with dma-buf mmap, when finishing the CPU access of the mapped pointer.
The error case should be rare to happen though, requiring the buffer become active during the sync period and for the end_cpu_access to be interrupted. So we use a uninterruptible mutex_lock to spit out when it ever happens.
v2: disable interruption to make sure errors are reported.
v3: update to the new end_cpu_access API.
v7: use .write = false cause it doesn't need to know whether it's write.
--- drivers/gpu/drm/i915/i915_gem_dmabuf.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
drivers/gpu/drm/i915/i915_gem_dmabuf.c +22 -0
@@ -212,6 +212,27 @@ static int i915_gem_begin_cpu_access(struct dma_buf *dma_buf, enum dma_data_direreturn ret; } +static void i915_gem_end_cpu_access (struct dma_buf *dma_buf,enum dma_data_direction direction) +{ +struct drm_i915_gem_object *obj =dma_buf_to_obj (dma_buf); +struct drm_device *dev = obj->base.dev; +struct drm_i915_private *dev_priv =to_i915 (dev); +bool was_interruptible; +int ret; + +mutex_lock (&dev->struct_mutex); + was_interruptible = dev_priv->mm.interruptible; + dev_priv->mm.interruptible = false; + + ret =i915_gem_object_set_to_gtt_domain (obj, false); + + dev_priv->mm.interruptible = was_interruptible; +mutex_unlock (&dev->struct_mutex); + +if (unlikely (ret)) +DRM_ERROR ("unable to flush buffer following CPU access; rendering may be corrupt\n" ); +} +static const struct dma_buf_ops i915_dmabuf_ops = { .map_dma_buf = i915_gem_map_dma_buf, .unmap_dma_buf = i915_gem_unmap_dma_buf,
@@ -224,6 +245,7 @@ static const struct dma_buf_ops i915_dmabuf_ops = { .vmap = i915_gem_dmabuf_vmap, .vunmap = i915_gem_dmabuf_vunmap, .begin_cpu_access = i915_gem_begin_cpu_access, + .end_cpu_access = i915_gem_end_cpu_access, }; struct dma_buf *i915_gem_prime_export(struct drm_device *dev,
Signature · 6 lines
2.1.4 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v7 5/5 drm/i915: Use CPU mapping for userspace dma-buf mmap()
In reply to Tiago VignattiUserspace is the one in charge of flush CPU by wrapping mmap with begin{,end}_cpu_access.
v2: Remove LLC check cause we have dma-buf sync providers now. Also, fix return before transferring ownership when mmap fails.
v3: Fix return values.
v4: !obj->base.filp is user triggerable, so removed the WARN_ON.
--- drivers/gpu/drm/i915/i915_gem_dmabuf.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_gem_dmabuf.c +17 -1
@@ -193,7 +193,23 @@ static void i915_gem_dmabuf_kunmap(struct dma_buf *dma_buf, unsigned long page_nstatic int i915_gem_dmabuf_mmap (struct dma_buf *dma_buf,struct vm_area_struct *vma) { -return -EINVAL ; +struct drm_i915_gem_object *obj =dma_buf_to_obj (dma_buf); +int ret; + +if (obj->base.size < vma->vm_end - vma->vm_start) +return -EINVAL ; + +if (!obj->base.filp) +return -ENODEV ; + + ret = obj->base.filp->f_op->mmap (obj->base.filp, vma); +if (ret) +return ret; + +fput (vma->vm_file); + vma->vm_file =get_file (obj->base.filp); + +return 0 ; }static int i915_gem_begin_cpu_access (struct dma_buf *dma_buf,enum dma_data_direction direction)
Signature · 6 lines
2.1.4 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v7 1/6 lib: Add gem_userptr and __gem_userptr helpers
In reply to Tiago VignattiThis patch moves userptr definitions and helpers implementation that were locally in gem_userptr_benchmark and gem_userptr_blits to the library, so other tests can make use of them as well. There's no functional changes.
v2: added __ function to differentiate when errors want to be handled back in the caller; bring gem_userptr_sync back to gem_userptr_blits; added gtkdoc.
--- benchmarks/gem_userptr_benchmark.c | 55 +++----------------- lib/ioctl_wrappers.c | 41 +++++++++++++++ lib/ioctl_wrappers.h | 13 +++++ tests/gem_userptr_blits.c | 104 ++++++++++--------------------------- 4 files changed, 86 insertions(+), 127 deletions(-)
benchmarks/gem_userptr_benchmark.c +6 -49
@@ -58,17 +58,6 @@#define PAGE_SIZE 4096#endif -#define LOCAL_I915_GEM_USERPTR 0x33 -#define LOCAL_IOCTL_I915_GEM_USERPTR DRM_IOWR (DRM_COMMAND_BASE + LOCAL_I915_GEM_USERPTR, struct local_i915_gem_userptr) -struct local_i915_gem_userptr { -uint64_t user_ptr; -uint64_t user_size; -uint32_t flags; -#define LOCAL_I915_USERPTR_READ_ONLY (1<<0) -#define LOCAL_I915_USERPTR_UNSYNCHRONIZED (1<<31) -uint32_t handle; -}; -static uint32_t userptr_flags =LOCAL_I915_USERPTR_UNSYNCHRONIZED ;#define BO_SIZE (65536)
@@ -83,30 +72,6 @@ static void gem_userptr_test_synchronized(void) userptr_flags =0 ; } -static int gem_userptr (int fd,void *ptr,int size,int read_only,uint32_t *handle) -{ -struct local_i915_gem_userptr userptr; -int ret; - - userptr.user_ptr = (uintptr_t )ptr; - userptr.user_size = size; - userptr.flags = userptr_flags; -if (read_only) - userptr.flags |=LOCAL_I915_USERPTR_READ_ONLY ; - - ret =drmIoctl (fd,LOCAL_IOCTL_I915_GEM_USERPTR , &userptr); -if (ret) - ret = errno; -igt_skip_on_f (ret ==ENODEV && - (userptr_flags &LOCAL_I915_USERPTR_UNSYNCHRONIZED ) ==0 && - !read_only, -"Skipping, synchronized mappings with no kernel CONFIG_MMU_NOTIFIER?" ); -if (ret ==0 ) - *handle = userptr.handle; - -return ret; -} -static void **handle_ptr_map;static unsigned int num_handle_ptr_map;
@@ -144,8 +109,7 @@ static uint32_t create_userptr_bo(int fd, int size) ret =posix_memalign (&ptr,PAGE_SIZE , size);igt_assert (ret ==0 ); - ret =gem_userptr (fd, (uint32_t *)ptr, size,0 , &handle); -igt_assert (ret ==0 ); +gem_userptr (fd, (uint32_t *)ptr, size,0 , userptr_flags, &handle);add_handle_ptr (handle, ptr);return handle;
@@ -167,7 +131,7 @@ static int has_userptr(int fd)assert (posix_memalign (&ptr,PAGE_SIZE ,PAGE_SIZE ) ==0 ); oldflags = userptr_flags;gem_userptr_test_unsynchronized (); - ret =gem_userptr (fd, ptr,PAGE_SIZE ,0 , &handle); + ret =__gem_userptr (fd, ptr,PAGE_SIZE ,0 , userptr_flags, &handle); userptr_flags = oldflags;if (ret !=0 ) {free (ptr);
@@ -379,9 +343,7 @@ static void test_impact_overlap(int fd, const char *prefix)for (i =0 , p = block; i < nr_bos[subtest]; i++, p +=PAGE_SIZE ) - ret =gem_userptr (fd, (uint32_t *)p,BO_SIZE ,0 , - &handles[i]); -igt_assert (ret ==0 ); +gem_userptr (fd, (uint32_t *)p,BO_SIZE ,0 , userptr_flags, &handles[i]); }if (nr_bos[subtest] >0 )
@@ -427,7 +389,6 @@ static void test_single(int fd)char *ptr, *bo_ptr;uint32_t handle =0 ;unsigned long iter =0 ; -int ret;unsigned long map_size =BO_SIZE +PAGE_SIZE -1 ; ptr = mmap(NULL, map_size, PROT_READ | PROT_WRITE,
@@ -439,8 +400,7 @@ static void test_single(int fd)start_test (test_duration_sec);while (run_test) { - ret =gem_userptr (fd, bo_ptr,BO_SIZE ,0 , &handle); -assert (ret ==0 ); +gem_userptr (fd, bo_ptr,BO_SIZE ,0 , userptr_flags, &handle);gem_close (fd, handle); iter++; }
@@ -456,7 +416,6 @@ static void test_multiple(int fd, unsigned int batch, int random)uint32_t handles[10000 ];int map[10000 ];unsigned long iter =0 ; -int ret;int i;unsigned long map_size = batch *BO_SIZE +PAGE_SIZE -1 ;
@@ -478,10 +437,8 @@ static void test_multiple(int fd, unsigned int batch, int random)if (random)igt_permute_array (map, batch, igt_exchange_int);for (i =0 ; i < batch; i++) { - ret =gem_userptr (fd, bo_ptr + map[i] *BO_SIZE , -BO_SIZE , -0 , &handles[i]); -assert (ret ==0 ); +gem_userptr (fd, bo_ptr + map[i] *BO_SIZE ,BO_SIZE , +0 , userptr_flags, &handles[i]); }if (random)igt_permute_array (map, batch, igt_exchange_int);
lib/ioctl_wrappers.c +41 -0
47 lines not on this page · raw message
lib/ioctl_wrappers.h +13 -0
@@ -112,6 +112,19 @@ void gem_context_require_param(int fd, uint64_t param);void gem_context_get_param (int fd,struct local_i915_gem_context_param *p);void gem_context_set_param (int fd,struct local_i915_gem_context_param *p); +#define LOCAL_I915_GEM_USERPTR 0x33 +#define LOCAL_IOCTL_I915_GEM_USERPTR DRM_IOWR (DRM_COMMAND_BASE + LOCAL_I915_GEM_USERPTR, struct local_i915_gem_userptr) +struct local_i915_gem_userptr { +uint64_t user_ptr; +uint64_t user_size; +uint32_t flags; +#define LOCAL_I915_USERPTR_READ_ONLY (1<<0) +#define LOCAL_I915_USERPTR_UNSYNCHRONIZED (1<<31) +uint32_t handle; +}; +void gem_userptr (int fd,void *ptr,int size,int read_only,uint32_t flags,uint32_t *handle); +int __gem_userptr (int fd,void *ptr,int size,int read_only,uint32_t flags,uint32_t *handle); +void gem_sw_finish (int fd,uint32_t handle);bool gem_bo_busy (int fd,uint32_t handle);
tests/gem_userptr_blits.c +26 -78
263 lines not on this page · raw message
Signature · 6 lines
2.1.4 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v7 2/6 prime_mmap: Add new test for calling mmap() on dma-buf fds
In reply to Tiago VignattiFrom: Rob Bradford <[email protected]>
This test has the following subtests:
- test_correct for correctness of the data
- test_map_unmap checks for mapping idempotency
- test_reprime checks for dma-buf creation idempotency
- test_forked checks for multiprocess access
- test_refcounting checks for buffer reference counting
- test_dup checks that dup()ing the fd works
- test_userptr make sure it fails when mmaping due the lack of obj->base.filp in a userptr.
- test_errors checks the error return values for failures
- test_aperture_limit tests multiple buffer creation at the gtt aperture limit
v2 (Tiago): Removed pattern_check(), which was walking through a useless iterator. Removed superfluous PROT_WRITE from gem_mmap, in test_correct(). Added binary file to .gitignore
v3 (Tiago): squash patch "prime_mmap: Test for userptr mmap" into this one. v4 (Tiago): use synchronized userptr for testing. Add test for buffer overlapping.
--- tests/Makefile.sources | 1 + tests/prime_mmap.c | 417 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 418 insertions(+) create mode 100644 tests/prime_mmap.c
tests/Makefile.sources +1 -0
@@ -96,6 +96,7 @@ TESTS_progs_M = \ pm_rps \ pm_rc6_residency \ pm_sseu \ + prime_mmap \ prime_self_import \ template \ $(NULL)
tests/prime_mmap.c new file +417 -0
417 lines not on this page · raw message
Signature · 6 lines
2.1.4 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v7 3/6 prime_mmap: Add basic tests to write in a bo using CPU
In reply to Tiago VignattiThis patch adds test_correct_cpu_write, which maps the texture buffer through a prime fd and then writes directly to it using the CPU. It stresses the driver to guarantee cache synchronization among the different domains.
This test also adds test_forked_cpu_write, which creates the GEM bo in one process and pass the prime handle of the it to another process, which in turn uses the handle only to map and write. Roughly speaking this test simulates Chrome OS architecture, where the Web content ("unpriviledged process") maps and CPU-draws a buffer, which was previously allocated in the GPU process ("priviledged process").
This requires kernel modifications (Daniel Thompson's "drm: prime: Honour O_RDWR during prime-handle-to-fd") and therefore prime_handle_to_fd_for_mmap is added to fail in case these lack. Also, upcoming tests (e.g. next patch) are going to use it as well, so make it public and available in the lib.
v2: adds prime_handle_to_fd_with_mmap for skipping test in older kernels and test for invalid flags.
--- lib/ioctl_wrappers.c | 25 +++++++++++++++ lib/ioctl_wrappers.h | 4 +++ tests/prime_mmap.c | 89 ++++++++++++++++++++++++++++++++++++++++++++++++---- 3 files changed, 112 insertions(+), 6 deletions(-)
lib/ioctl_wrappers.c +25 -0
@@ -1329,6 +1329,31 @@ int prime_handle_to_fd(int fd, uint32_t handle) }/** +* prime_handle_to_fd_for_mmap: +* @fd: open i915 drm file descriptor +* @handle: file-private gem buffer object handle +* +* Same as prime_handle_to_fd above but with DRM_RDWR capabilities, which can +* be useful for writing into the mmap'ed dma-buf file-descriptor. +* +* Returns: The created dma-buf fd handle or -1 if the ioctl fails. +*/ +int prime_handle_to_fd_for_mmap (int fd,uint32_t handle) +{ +struct drm_prime_handle args; + +memset (&args,0 ,sizeof (args)); + args.handle = handle; + args.flags =DRM_CLOEXEC |DRM_RDWR ; + args.fd =-1 ; + +if (drmIoctl (fd,DRM_IOCTL_PRIME_HANDLE_TO_FD , &args) !=0 ) +return -1 ; + +return args.fd; +} + +/** * prime_fd_to_handle: * @fd: open i915 drm file descriptor * @dma_buf_fd: dma-buf fd handle
lib/ioctl_wrappers.h +4 -0
@@ -149,6 +149,10 @@ void gem_require_ring(int fd, int ring_id);/* prime */ int prime_handle_to_fd (int fd,uint32_t handle); +#ifndef DRM_RDWR +#define DRM_RDWR O_RDWR +#endif +int prime_handle_to_fd_for_mmap (int fd,uint32_t handle);uint32_t prime_fd_to_handle (int fd,int dma_buf_fd);off_t prime_get_size (int dma_buf_fd);
tests/prime_mmap.c +83 -6
144 lines not on this page · raw message
Signature · 6 lines
2.1.4 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v7 4/6 lib: Add prime_sync_start and prime_sync_end helpers
In reply to Tiago VignattiThis patch adds dma-buf mmap synchronization ioctls that can be used by tests for cache coherency management e.g. when CPU and GPU domains are being accessed through dma-buf at the same time.
v7: add sync invalid flags test.
--- lib/ioctl_wrappers.c | 26 ++++++++++++++++++++++++++ lib/ioctl_wrappers.h | 17 +++++++++++++++++ tests/prime_mmap.c | 25 +++++++++++++++++++++++++ 3 files changed, 68 insertions(+)
lib/ioctl_wrappers.c +26 -0
@@ -1400,6 +1400,32 @@ off_t prime_get_size(int dma_buf_fd) }/** +* prime_sync_start +* @dma_buf_fd: dma-buf fd handle +*/ +void prime_sync_start (int dma_buf_fd) +{ +struct local_dma_buf_sync sync_start; + +memset (&sync_start,0 ,sizeof (sync_start)); + sync_start.flags =LOCAL_DMA_BUF_SYNC_START |LOCAL_DMA_BUF_SYNC_RW ; +do_ioctl (dma_buf_fd,LOCAL_DMA_BUF_IOCTL_SYNC , &sync_start); +} + +/** +* prime_sync_end +* @dma_buf_fd: dma-buf fd handle +*/ +void prime_sync_end (int dma_buf_fd) +{ +struct local_dma_buf_sync sync_end; + +memset (&sync_end,0 ,sizeof (sync_end)); + sync_end.flags =LOCAL_DMA_BUF_SYNC_END |LOCAL_DMA_BUF_SYNC_RW ; +do_ioctl (dma_buf_fd,LOCAL_DMA_BUF_IOCTL_SYNC , &sync_end); +} + +/** * igt_require_fb_modifiers: * @fd: Open DRM file descriptor. *
lib/ioctl_wrappers.h +17 -0
@@ -148,6 +148,21 @@ void gem_require_caching(int fd);void gem_require_ring (int fd,int ring_id);/* prime */ +struct local_dma_buf_sync { +uint64_t flags; +}; + +#define LOCAL_DMA_BUF_SYNC_READ (1 << 0) +#define LOCAL_DMA_BUF_SYNC_WRITE (2 << 0) +#define LOCAL_DMA_BUF_SYNC_RW (LOCAL_DMA_BUF_SYNC_READ | LOCAL_DMA_BUF_SYNC_WRITE) +#define LOCAL_DMA_BUF_SYNC_START (0 << 2) +#define LOCAL_DMA_BUF_SYNC_END (1 << 2) +#define LOCAL_DMA_BUF_SYNC_VALID_FLAGS_MASK \ + (LOCAL_DMA_BUF_SYNC_RW | LOCAL_DMA_BUF_SYNC_END) + +#define LOCAL_DMA_BUF_BASE 'b' +#define LOCAL_DMA_BUF_IOCTL_SYNC _IOW(LOCAL_DMA_BUF_BASE, 0, struct local_dma_buf_sync) +int prime_handle_to_fd (int fd,uint32_t handle);#ifndef DRM_RDWR #define DRM_RDWR O_RDWR
@@ -155,6 +170,8 @@ int prime_handle_to_fd(int fd, uint32_t handle);int prime_handle_to_fd_for_mmap (int fd,uint32_t handle);uint32_t prime_fd_to_handle (int fd,int dma_buf_fd);off_t prime_get_size (int dma_buf_fd); +void prime_sync_start (int dma_buf_fd); +void prime_sync_end (int dma_buf_fd);/* addfb2 fb modifiers */ struct local_drm_mode_fb_cmd2 {
tests/prime_mmap.c +25 -0
@@ -401,6 +401,30 @@ test_errors(void)gem_close (fd, handle); } +/* Test for invalid flags on sync ioctl */ +static void +test_invalid_sync_flags (void ) +{ +int i, dma_buf_fd; +uint32_t handle; +struct local_dma_buf_sync sync; +int invalid_flags[] = {-1 , +0x00 , +LOCAL_DMA_BUF_SYNC_RW +1 , +LOCAL_DMA_BUF_SYNC_VALID_FLAGS_MASK +1 }; + + handle =gem_create (fd,BO_SIZE ); + dma_buf_fd =prime_handle_to_fd (fd, handle); +for (i =0 ; i <sizeof (invalid_flags) /sizeof (invalid_flags[0 ]); i++) { +memset (&sync,0 ,sizeof (sync)); + sync.flags = invalid_flags[i]; + +drmIoctl (dma_buf_fd,LOCAL_DMA_BUF_IOCTL_SYNC , &sync); +igt_assert_eq (errno,EINVAL ); + errno =0 ; + } +} +static void test_aperture_limit (void ) {
@@ -473,6 +497,7 @@ igt_main { "test_dup", test_dup }, { "test_userptr", test_userptr }, { "test_errors", test_errors }, + { "test_invalid_sync_flags", test_invalid_sync_flags }, { "test_aperture_limit", test_aperture_limit }, };int i;
Signature · 6 lines
2.1.4 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v7 5/6 tests: Add kms_mmap_write_crc for cache coherency tests
In reply to Tiago VignattiThis program can be used to detect when CPU writes in the dma-buf mapped object don't land in scanout due cache incoherency.
Although this seems a problem inherently of non-LCC machines ("Atom"), this particular test catches a cache dirt on scanout on LLC machines as well. It's inspired in Ville's kms_pwrite_crc.c and can be used also to test the correctness of the driver's begin_cpu_access and end_cpu_access (which requires i915 implementation.
To see the need for flush, one has to run using '-n' option to not call the sync ioctls which, via a rather simple CPU hog the system will trashes the caches, while the test will catch the coherency issue. If you now suppress '-n', then things should just work like expected.
I tested this with !llc and llc platforms, BTY and IVY respectively.
v2: use prime_handle_to_fd_for_mmap instead.
v3: merge end_cpu_access() patch with this and provide options to disable sync.
v4: use library's prime_sync_{start,end} instead.
v7: use CPU hog instead and use testing rounds to catch the sync problems.
--- tests/Makefile.sources | 1 + tests/kms_mmap_write_crc.c | 313 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 314 insertions(+) create mode 100644 tests/kms_mmap_write_crc.c
tests/Makefile.sources +1 -0
@@ -168,6 +168,7 @@ TESTS_progs = \ kms_3d \ kms_fence_pin_leak \ kms_force_connector_basic \ + kms_mmap_write_crc \ kms_pwrite_crc \ kms_sink_crc_basic \ prime_udl \
tests/kms_mmap_write_crc.c new file +313 -0
313 lines not on this page · raw message
Signature · 6 lines
2.1.4 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v7 6/6 tests: Add prime_mmap_coherency for cache coherency tests
In reply to Tiago VignattiDifferent than kms_mmap_write_crc that captures the coherency issues within the scanout mapped buffer, this one is meant for test dma-buf mmap on !llc platforms mostly and provoke coherency bugs so we know where we need the sync ioctls.
I tested this with !llc and llc platforms, BTY and IVY respectively.
--- tests/Makefile.sources | 1 + tests/prime_mmap_coherency.c | 246 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 247 insertions(+) create mode 100644 tests/prime_mmap_coherency.c
tests/Makefile.sources +1 -0
@@ -97,6 +97,7 @@ TESTS_progs_M = \ pm_rc6_residency \ pm_sseu \ prime_mmap \ + prime_mmap_coherency \ prime_self_import \ template \ $(NULL)
tests/prime_mmap_coherency.c new file +246 -0
246 lines not on this page · raw message
Signature · 6 lines
2.1.4 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Stéphane Marchesin
Reviewed-byQuoted 21 lines · Tiago Vignatti
Hey back,
Thank you Daniel, Chris, Alex and Thomas for reviewing the last series. I think I addressed most of the comments now in version 7, including:
- being even more wording in the doc about sync usage.
- pass .write = false always in i915end_cpu_access.
- add sync invalid flags test (igt).
- inkms_mmap_write_crc, use CPU hog and testing rounds to catch the sync problems (igt).Here are the trees:
https://github.com/tiagovignatti/drm-intel/commits/drm-intel-nightly_dma-buf-mmap-v7
https://github.com/tiagovignatti/intel-gpu-tools/commits/dma-buf-mmap-v7Also, Chrome OS side is in progress. This past week I've been mostly struggling with fail attempts to build it (boots and goes to a black screen. Sigh.) and also finding a way to make my funky BayTrail-T laptop with 32-bit UEFI firmware boot up (success with Ubuntu but no success yet in CrOS). A WIP of Chromium changes can be seen here anyways:
Quoted 3 lines
https://codereview.chromium.org/1262043002/
Happy Holidays!
For the series:
Quoted 10 lines
Tiago
--
2.1.4_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 23 lines · Stéphane Marchesin
Quoted 21 lines · Tiago Vignatti
Hey back,
Thank you Daniel, Chris, Alex and Thomas for reviewing the last series. I think I addressed most of the comments now in version 7, including:
- being even more wording in the doc about sync usage.
- pass .write = false always in i915end_cpu_access.
- add sync invalid flags test (igt).
- inkms_mmap_write_crc, use CPU hog and testing rounds to catch the sync problems (igt).Here are the trees:
https://github.com/tiagovignatti/drm-intel/commits/drm-intel-nightly_dma-buf-mmap-v7
https://github.com/tiagovignatti/intel-gpu-tools/commits/dma-buf-mmap-v7Also, Chrome OS side is in progress. This past week I've been mostly struggling with fail attempts to build it (boots and goes to a black screen. Sigh.) and also finding a way to make my funky BayTrail-T laptop with 32-bit UEFI firmware boot up (success with Ubuntu but no success yet in CrOS). A WIP of Chromium changes can be seen here anyways:
Quoted 7 lines
Quoted 3 lines
https://codereview.chromium.org/1262043002/
Happy Holidays!
For the series:
Reviewed-by Stéphane Marchesin <[email protected]>
Thank you! Daniel, here are the trees ready for pulling (I hope) now:
https://github.com/tiagovignatti/drm-intel/commits/drm-intel-nightly_dma-buf-mmap-v8
https://github.com/tiagovignatti/intel-gpu-tools/commits/dma-buf-mmap-v8
Tiago
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 28 lines · Tiago Vignatti
Quoted 27 lines · Stéphane Marchesin
Quoted 24 lines · Tiago Vignatti
Hey back,
Thank you Daniel, Chris, Alex and Thomas for reviewing the last series. I think I addressed most of the comments now in version 7, including:
- being even more wording in the doc about sync usage.
- pass .write = false always in i915end_cpu_access.
- add sync invalid flags test (igt).
- inkms_mmap_write_crc, use CPU hog and testing rounds to catch the sync problems (igt).Here are the trees:
https://github.com/tiagovignatti/drm-intel/commits/drm-intel-nightly_dma-buf-mmap-v7
https://github.com/tiagovignatti/intel-gpu-tools/commits/dma-buf-mmap-v7Also, Chrome OS side is in progress. This past week I've been mostly struggling with fail attempts to build it (boots and goes to a black screen. Sigh.) and also finding a way to make my funky BayTrail-T laptop with 32-bit UEFI firmware boot up (success with Ubuntu but no success yet in CrOS). A WIP of Chromium changes can be seen here anyways:
https://codereview.chromium.org/1262043002/
Happy Holidays!
Quoted 8 lines
Quoted 3 lines
For the series:
Reviewed-by Stéphane Marchesin <[email protected]>Thank you! Daniel, here are the trees ready for pulling (I hope) now:
https://github.com/tiagovignatti/drm-intel/commits/drm-intel-nightly_dma-buf-mmap-v8
https://github.com/tiagovignatti/intel-gpu-tools/commits/dma-buf-mmap-v8
Pulled in the kernel bits, but the igt ones need to be rebased. Can you please resend?
Thanks, Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel