ARM64: dts: add LS1043a-QDS board support
Subsystems (2)
PATCH 1/1 ARM64: dts: add LS1043a-QDS board support
From: Shaohui Xie <[email protected]>
---
Dependence:
https://patchwork.kernel.org/patch/7635141/
arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 167 ++++++++++++++++++++++ 2 files changed, 168 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
arch/arm64/boot/dts/freescale/Makefile +1 -0
@@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb always := $(dtb-y) subdir-y := $(dts-dirs)
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts new file +167 -0
167 lines not on this page · raw message
Signature · 1 line
2.1.0.27.g96db324
PATCH 1/1 ARM64: dts: add LS1043a-QDS board support
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts line 52
Quoted 6 lines · Zhiqiang Hou
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts new file +6
-0+/dts-v1/; +/include/ "fsl-ls1043a.dtsi" + +/ { + model = "LS1043A QDS Board"; +
compatible?
-Scott
PATCH 1/1 ARM64: dts: add LS1043a-QDS board support
Quoted 11 lines
-----Original Message-----
From: Scott Wood [mailto:scottwood at freescale.com]
Sent: Thursday, December 24, 2015 1:40 PM
To: Zhiqiang Hou; devicetree at vger.kernel.org; robh+dt at kernel.org; mark.rutland at arm.com; pawel.moll at arm.com; ijc+devicetree at hellion.org.uk; galak at codeaurora.org; linux-arm-kernel at lists.infradead.org; catalin.marinas at arm.com; will.deacon at arm.com
Cc: Mingkai.Hu at freescale.com; Shaohui.Xie at freescale.com
Subject: Re: [PATCH] ARM64: dts: add LS1043a-QDS board supportOn Thu, 2015-12-24 at 13:30 +0800, Zhiqiang Hou wrote:
Quoted 8 lines
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts line 52
Quoted 6 lines
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts new file +6
-0+/dts-v1/; +/include/ "fsl-ls1043a.dtsi" + +/ { + model = "LS1043A QDS Board"; +compatible?
Hello Scott,
There is Serdes module on some ARM64 SoCs, e.g. LS2080A and LS1043A, Seems serdes node has not been added in DTS of the two SoCs.
There are serdes nodes on some powerpc SoCs, e.g. t4240si-post.dtsi:
serdes: serdes at ea000 {
compatible = "fsl,t4240-serdes";
reg = <0xea000 0x4000>;
};Could the similar serdes node be added for ARM64 SoCs, like below?
serdes: serdes at 1ea0000 {
compatible = "fsl,ls1043a-serdes";
reg = <0x1ea0000 0x2000>;
};Thanks,
Shaohui
PATCH 1/1 ARM64: dts: add LS1043a-QDS board support
In reply to Scott WoodQuoted 13 lines
-----Original Message-----
From: Scott Wood [mailto:scottwood at freescale.com]
Sent: 2015?12?24? 13:40
To: Zhiqiang Hou <[email protected]>; devicetree at vger.kernel.org; robh+dt at kernel.org; mark.rutland at arm.com; pawel.moll at arm.com; ijc+devicetree at hellion.org.uk; galak at codeaurora.org; linux-arm- kernel at lists.infradead.org; catalin.marinas at arm.com; will.deacon at arm.com
Cc: Mingkai.Hu at freescale.com; Shaohui.Xie at freescale.com
Subject: Re: [PATCH] ARM64: dts: add LS1043a-QDS board supportOn Thu, 2015-12-24 at 13:30 +0800, Zhiqiang Hou wrote:
Quoted 8 lines
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts line 52
Quoted 6 lines
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts new file +6
-0+/dts-v1/; +/include/ "fsl-ls1043a.dtsi" + +/ { + model = "LS1043A QDS Board"; +compatible?
will add root node compatible in v2.
Thanks,
Zhiqiang