Skip to contentSkip to conversation

sunxi: Remove Orangepi PC RAM speed to 624 MHz

PATCH New Hans de Goede 4 participants 4 messages Dec 23, 2015 – Dec 27, 2015

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 sunxi: Remove Orangepi PC RAM speed to 624 MHz

There are some reports of stability issues at 672 MHz, see:
http://linux-sunxi.org/Orange_Pi_PC#DRAM_clock_speed_limit

So reduce the DRAM speed to 624MHz which seems to be reliable everywhere.

---
 configs/orangepi_pc_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
configs/orangepi_pc_defconfig +1 -1
index 75afca9..358caa5 100644
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN8I_H3=y
-CONFIG_DRAM_CLK=672
+CONFIG_DRAM_CLK=624
 CONFIG_DRAM_ZQ=3881979
 CONFIG_DRAM_ODT_EN=y
 # CONFIG_VIDEO is not set
Signature · 1 line
2.5.0
#1 lore raw

PATCH 1/1 sunxi: Remove Orangepi PC RAM speed to 624 MHz

Quoted 2 lines · Hans de Goede

There are some reports of stability issues at 672 MHz, see:
http://linux-sunxi.org/Orange_Pi_PC#DRAM_clock_speed_limit

Looks like only one (in that table at least)? And do we expect this data to remain in the wiki, I suppose so.

In any case, this...

Quoted 2 lines

So reduce the DRAM speed to 624MHz which seems to be reliable everywhere.

...seems reasonable to me.

Quoted 1 line
#2 lore raw

PATCH 1/1 sunxi: Remove Orangepi PC RAM speed to 624 MHz

Hi,

Quoted 5 lines · Ian Campbell
Quoted 2 lines · Hans de Goede

There are some reports of stability issues at 672 MHz, see:
http://linux-sunxi.org/Orange_Pi_PC#DRAM_clock_speed_limit

Looks like only one (in that table at least)?

Correct, but another 7 out of 13 are only just reliable at 672 and fail one speed step higher, showing that the manufacturer default of 672 is cutting it awfully close to the failure point, this feels like the factory default is actually an overclocked setting.

Quoted 2 lines

And do we expect this
data to remain in the wiki, I suppose so.

Ack.

Quoted 9 lines

In any case, this...

Quoted 2 lines

So reduce the DRAM speed to 624MHz which seems to be reliable everywhere.

...seems reasonable to me.

Quoted 1 line

Thanks,

Hans

#3 lore raw

PATCH 1/1 sunxi: Remove Orangepi PC RAM speed to 624 MHz

In reply to Hans de Goede
Quoted 6 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Hans" == Hans de Goede <[email protected]> writes:

There are some reports of stability issues at 672 MHz, see:
http://linux-sunxi.org/Orange_Pi_PC#DRAM_clock_speed_limit

So reduce the DRAM speed to 624MHz which seems to be reliable everywhere.

With the subject s/Remove/Reduce/

Quoted 25 lines
---
 configs/orangepi_pc_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
configs/orangepi_pc_defconfig +1 -1
index 75afca9..358caa5 100644
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN8I_H3=y
-CONFIG_DRAM_CLK=672
+CONFIG_DRAM_CLK=624
 CONFIG_DRAM_ZQ=3881979
 CONFIG_DRAM_ODT_EN=y
 # CONFIG_VIDEO is not set
Signature · 6 lines
2.5.0

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signature · 1 line
Bye, Peter Korsgaard