x86: qemu: add fw_cfg interface support for qemu-x86 targets
v3 cover x86: qemu: add fw_cfg interface support for qemu-x86 targets
The fw_cfg interface provided by QEMU allow guests to retrieve various information about the system, e.g. cpu number, variaous firmware data, kernel setup, etc. The fw_cfg interface can be accessed through 3 IO ports (on x86), using x86 in/out instructions.
- 0x510: select configuration items to access
- 0x511: reading this port will return data selected in 0x510
- 0x514: this can be used to detect if DMA interface is available
If fw_cfg DMA interface is available, it can be used to accelerate accesses.
This patchset adds the following supports for qemu-x86 targets:
+ the fw_cfg driver itself
+ add a U-Boot command 'fw' to support direct accessing kernel informtion from fw_cfg interface, this saves the time of loading them from hard disk or network again, through emulated devices.
+ use fw_cfg to get cpu number at runtime, so smp boot no longer relies on the cpu node hard-coded in dts files.
Changes in v2:
- rebase to u-boot-x86/next
- various cleanups
Changes in v3:
- fix an error in do_qemu_fw()
Miao Yan (8):
x86: qemu: add fw_cfg support
x86: qemu: add a cpu uclass driver for qemu target
x86: fix a typo in function name
x86: use actual CPU number for allocating memory
x86: qemu: add qemu_fwcfg_fdt_fixup()
x86: qemu: fix up cpu node in device tree
x86: reserve more spaces for dtb
x86: qemu: add documentaion for the fw_cfg interface
arch/x86/cpu/mp_init.c | 12 +- arch/x86/cpu/qemu/Makefile | 2 +- arch/x86/cpu/qemu/cpu.c | 57 ++++++++ arch/x86/cpu/qemu/fw_cfg.c | 306 +++++++++++++++++++++++++++++++++++++++ arch/x86/cpu/qemu/fw_cfg.h | 108 ++++++++++++++ arch/x86/cpu/qemu/qemu.c | 7 + arch/x86/dts/Makefile | 2 +- arch/x86/dts/qemu-x86_i440fx.dts | 19 +-- arch/x86/dts/qemu-x86_q35.dts | 19 +-- doc/README.x86 | 36 ++++- 10 files changed, 521 insertions(+), 47 deletions(-) create mode 100644 arch/x86/cpu/qemu/cpu.c create mode 100644 arch/x86/cpu/qemu/fw_cfg.c create mode 100644 arch/x86/cpu/qemu/fw_cfg.h
Signature · 1 line
1.9.1
PATCH v3 1/8 x86: qemu: add fw_cfg support
The QEMU fw_cfg interface allows the guest to retrieve various data information from QEMU. For example, APCI/SMBios tables, number of online cpus, kernel data and command line, etc.
This patch adds support for QEMU fw_cfg interface.
---
Changes in v2:
- rewrite command handling logic
- various cleanups
Changes in v3:
- fix an error in do_qemu_fw()
arch/x86/cpu/qemu/Makefile | 2 +- arch/x86/cpu/qemu/fw_cfg.c | 241 +++++++++++++++++++++++++++++++++++++++++++++ arch/x86/cpu/qemu/fw_cfg.h | 97 ++++++++++++++++++ arch/x86/cpu/qemu/qemu.c | 3 + 4 files changed, 342 insertions(+), 1 deletion(-) create mode 100644 arch/x86/cpu/qemu/fw_cfg.c create mode 100644 arch/x86/cpu/qemu/fw_cfg.h
arch/x86/cpu/qemu/Makefile +1 -1
@@ -7,5 +7,5 @@ ifndef CONFIG_EFI_STUB obj-y += car.o dram.o endif -obj-y += qemu.o +obj-y += qemu.o fw_cfg.o obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi.o dsdt.o
arch/x86/cpu/qemu/fw_cfg.c new file +241 -0
241 lines not on this page · raw message
arch/x86/cpu/qemu/fw_cfg.h new file +97 -0
97 lines not on this page · raw message
arch/x86/cpu/qemu/qemu.c +3 -0
@@ -11,6 +11,7 @@#include <asm/processor.h> #include <asm/arch/device.h> #include <asm/arch/qemu.h> +#include "fw_cfg.h" static bool i440fx;
@@ -57,6 +58,8 @@ static void qemu_chipset_init(void)x86_pci_write_config32 (PCI_BDF (0 ,0 ,0 ),PCIEX_BAR ,CONFIG_PCIE_ECAM_BASE |BAR_EN ); } + +qemu_fwcfg_init (); }int arch_cpu_init (void )
Signature · 1 line
1.9.1
PATCH v3 1/8 x86: qemu: add fw_cfg support
Hi Miao,
Quoted 53 lines · Miao Yan
The QEMU
fw_cfginterface allows the guest to retrieve various data information from QEMU. For example, APCI/SMBios tables, number of online cpus, kernel data and command line, etc.This patch adds support for QEMU
fw_cfginterface.Signed-off-by Miao Yan <[email protected]>---
Changes in v2:
- rewrite command handling logic
- various cleanupsChanges in v3:
- fix an error indo_qemu_fw()arch/x86/cpu/qemu/Makefile | 2 +- arch/x86/cpu/qemu/fw_cfg.c | 241 +++++++++++++++++++++++++++++++++++++++++++++ arch/x86/cpu/qemu/fw_cfg.h | 97 ++++++++++++++++++ arch/x86/cpu/qemu/qemu.c | 3 + 4 files changed, 342 insertions(+), 1 deletion(-) create mode 100644 arch/x86/cpu/qemu/fw_cfg.c create mode 100644 arch/x86/cpu/qemu/fw_cfg.harch/x86/cpu/qemu/Makefile +1
-1@@ -7,5 +7,5 @@ ifndef CONFIG_EFI_STUB obj-y += car.o dram.o endif -obj-y += qemu.o +obj-y += qemu.o fw_cfg.o obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi.o dsdt.oarch/x86/cpu/qemu/fw_cfg.c new file +13
-0@@ -0,0 +1,241 @@ +/* +* (C) Copyright 2015 Miao Yan <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#include <common.h> +#include <command.h> +#include <errno.h> +#include <malloc.h> +#include <asm/io.h> +#include "fw_cfg.h" +
arch/x86/cpu/qemu/fw_cfg.c line 23
Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.c new file +10
-0+static bool fwcfg_present; +static bool fwcfg_dma_present; + +static void qemu_fwcfg_read_entry_pio (uint16_t entry, +uint32_t size,void *address) +{ +uint32_t i =0 ; +uint8_t *data = address; + +if (entry !=FW_CFG_INVALID )
As we discussed in the v1 thread, can you please put a comment block here to describe the QEMU internals (ie: what happens if entry == FW_CFG_INVALID)?
Quoted 4 lines
arch/x86/cpu/qemu/fw_cfg.c new file +4
-0+outw (entry,FW_CONTROL_PORT ); +while (size--) + data[i++] =inb (FW_DATA_PORT ); +}
arch/x86/cpu/qemu/fw_cfg.c line 37
Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.c new file +10
-0+ +static void qemu_fwcfg_read_entry_dma (uint16_t entry, +uint32_t size,void *address) +{ +struct fw_cfg_dma_access dma; + + dma.length =cpu_to_be32 (size); + dma.address =cpu_to_be64 ((uintptr_t )address); + dma.control =cpu_to_be32 (FW_CFG_DMA_READ ); +if (entry !=FW_CFG_INVALID )
ditto.
arch/x86/cpu/qemu/fw_cfg.c line 48
Quoted 11 lines
arch/x86/cpu/qemu/fw_cfg.c new file +11
-0+ dma.control |=cpu_to_be32 (FW_CFG_DMA_SELECT | (entry <<16 )); + +barrier (); + +debug ("qemu_fwcfg_dma_read_entry: addr %p, length %u control 0x%x\n" , + address, size,be32_to_cpu (dma.control)); + +outl (cpu_to_be32 ((uint32_t )&dma),FW_DMA_PORT_HIGH ); + +while (dma.control & ~FW_CFG_DMA_ERROR ) + __asm__ __volatile__ ("pause" );
For some reason, with the v3 patch U-Boot hangs here. I changed to use pio to read the entry then U-Boot can boot. Can you please check this?
Quoted 7 lines
arch/x86/cpu/qemu/fw_cfg.c new file +7
-0+} + +static bool qemu_fwcfg_present (void ) +{ +uint32_t qemu; + +qemu_fwcfg_read_entry_pio (FW_CFG_SIGNATURE ,4 , &qemu);
arch/x86/cpu/qemu/fw_cfg.c line 65
Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.c new file +10
-0+return be32_to_cpu (qemu) ==QEMU_FW_CFG_SIGNATURE ; +} + +static bool qemu_fwcfg_dma_present (void ) +{ +uint8_t dma_enabled; + +qemu_fwcfg_read_entry_pio (FW_CFG_ID ,1 , &dma_enabled); +if (dma_enabled &FW_CFG_DMA_ENABLED ) +return 1 ;
return true;
arch/x86/cpu/qemu/fw_cfg.c line 67
Quoted 2 lines
arch/x86/cpu/qemu/fw_cfg.c new file +2
-0+ +return 0 ;
return false;
Quoted 183 lines
arch/x86/cpu/qemu/fw_cfg.c new file +174
-0+} + +static void qemu_fwcfg_read_entry (uint16_t entry, +uint32_t length,void *address) +{ +if (fwcfg_dma_present) +qemu_fwcfg_read_entry_dma (entry, length, address); +else +qemu_fwcfg_read_entry_pio (entry, length, address); +} + +int qemu_fwcfg_online_cpus (void ) +{ +uint16_t nb_cpus; + +if (!fwcfg_present) +return 1 ; + +qemu_fwcfg_read_entry (FW_CFG_NB_CPUS ,2 , &nb_cpus); + +return le16_to_cpu (nb_cpus); +} + +static int qemu_fwcfg_setup_kernel (void *load_addr) +{ +char *data_addr; +uint32_t setup_size, kernel_size, cmdline_size, initrd_size; + +qemu_fwcfg_read_entry (FW_CFG_SETUP_SIZE ,4 , &setup_size); +qemu_fwcfg_read_entry (FW_CFG_KERNEL_SIZE ,4 , &kernel_size); + +if (setup_size ==0 || kernel_size ==0 ) { +printf ("warning: no kernel available\n" ); +return -1 ; + } + + data_addr = load_addr; +qemu_fwcfg_read_entry (FW_CFG_SETUP_DATA , +le32_to_cpu (setup_size), data_addr); + data_addr +=le32_to_cpu (setup_size); + +qemu_fwcfg_read_entry (FW_CFG_KERNEL_DATA , +le32_to_cpu (kernel_size), data_addr); + data_addr +=le32_to_cpu (kernel_size); + +qemu_fwcfg_read_entry (FW_CFG_INITRD_SIZE ,4 , &initrd_size); +if (initrd_size ==0 ) { +printf ("warning: no initrd available\n" ); + }else { +qemu_fwcfg_read_entry (FW_CFG_INITRD_DATA , +le32_to_cpu (initrd_size), data_addr); + data_addr +=le32_to_cpu (initrd_size); + } + +qemu_fwcfg_read_entry (FW_CFG_CMDLINE_SIZE ,4 , &cmdline_size); +qemu_fwcfg_read_entry (FW_CFG_CMDLINE_DATA , +le32_to_cpu (cmdline_size), data_addr); + +printf ("loading kernel to address %p" , load_addr); +if (initrd_size) +printf (" initrd %p\n" , + (char *)load_addr + +le32_to_cpu (setup_size) + +le32_to_cpu (kernel_size)); +else +printf ("\n" ); + +return setenv ("bootargs" , data_addr); +} + +static int qemu_fwcfg_list_firmware (void ) +{ +int i; +uint32_t count; +struct fw_cfg_files *files; + +qemu_fwcfg_read_entry (FW_CFG_FILE_DIR ,4 , &count); +if (!count) +return 0 ; + + count =be32_to_cpu (count); + files =malloc (count *sizeof (struct fw_cfg_file )); +if (!files) +return -ENOMEM ; + + files->count = count; +qemu_fwcfg_read_entry (FW_CFG_INVALID , + count *sizeof (struct fw_cfg_file ), + files->files); + +for (i =0 ; i < files->count; i++) +printf ("%-56s\n" , files->files[i].name); +free (files); +return 0 ; +} + +void qemu_fwcfg_init (void ) +{ + fwcfg_present =qemu_fwcfg_present (); +if (fwcfg_present) + fwcfg_dma_present =qemu_fwcfg_dma_present (); +} + +static int qemu_fwcfg_do_list (cmd_tbl_t *cmdtp,int flag, +int argc,char *const argv[]) +{ +qemu_fwcfg_list_firmware (); + +return 0 ; +} + +static int qemu_fwcfg_do_cpus (cmd_tbl_t *cmdtp,int flag, +int argc,char *const argv[]) +{ +printf ("%d cpu(s) online\n" ,qemu_fwcfg_online_cpus ()); + +return 0 ; +} + +static int qemu_fwcfg_do_load (cmd_tbl_t *cmdtp,int flag, +int argc,char *const argv[]) +{ +void *load_addr; + +if (argc ==1 ) { + load_addr = (void *)simple_strtoul (argv[0 ],NULL ,16 ); + }else { + load_addr =getenv ("loadaddr" ); +if (!load_addr) + load_addr = (void *)CONFIG_SYS_LOAD_ADDR ; +else + load_addr = (void *)simple_strtoul (load_addr, +NULL ,16 ); + } + +return qemu_fwcfg_setup_kernel (load_addr); +} + +static cmd_tbl_t fwcfg_commands[] = { +U_BOOT_CMD_MKENT (list,0 ,1 , qemu_fwcfg_do_list,"" ,"" ), +U_BOOT_CMD_MKENT (cpus,0 ,1 , qemu_fwcfg_do_cpus,"" ,"" ), +U_BOOT_CMD_MKENT (load,1 ,1 , qemu_fwcfg_do_load,"" ,"" ), +}; + +int do_qemu_fw (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[]) +{ +int ret; +cmd_tbl_t *fwcfg_cmd; + +if (!fwcfg_present) { +printf ("QEMU fw_cfg interface not found\n" ); +return CMD_RET_USAGE ; + } + + fwcfg_cmd =find_cmd_tbl (argv[1 ], fwcfg_commands, +ARRAY_SIZE (fwcfg_commands)); + argc -=2 ; + argv +=2 ; +if (!fwcfg_cmd || argc > fwcfg_cmd->maxargs) +return CMD_RET_USAGE ; + + ret = fwcfg_cmd->cmd (fwcfg_cmd, flag, argc, argv); + +return cmd_process_error (fwcfg_cmd, ret); +} + +U_BOOT_CMD ( + fw,3 ,1 , do_qemu_fw, +"QEMU firmware interface" , +"<command>\n" +" - list : print firmware(s) currently loaded\n" +" - cpus : print online cpu number\n" +" - load <addr> : load kernel (if any) to address <addr>, and setup for zboot\n" +)arch/x86/cpu/qemu/fw_cfg.h new file +3
-0@@ -0,0 +1,97 @@ +/* +* (C) Copyright 2015 Miao Yan <[email protected]> +*
arch/x86/cpu/qemu/fw_cfg.h line 13
Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.h new file +10
-0+* SPDX-License-Identifier: GPL-2.0+ +*/ + +#ifndef __FW_CFG__ +#define __FW_CFG__ + +#define FW_CONTROL_PORT 0x510 +#define FW_DATA_PORT 0x511 +#define FW_DMA_PORT_LOW 0x514 +#define FW_DMA_PORT_HIGH 0x518
Please use tab after the macro name. Please fix this globally in this series.
Quoted 20 lines
arch/x86/cpu/qemu/fw_cfg.h new file +20
-0+ +enum qemu_fwcfg_items { +FW_CFG_SIGNATURE =0x00 , +FW_CFG_ID =0x01 , +FW_CFG_UUID =0x02 , +FW_CFG_RAM_SIZE =0x03 , +FW_CFG_NOGRAPHIC =0x04 , +FW_CFG_NB_CPUS =0x05 , +FW_CFG_MACHINE_ID =0x06 , +FW_CFG_KERNEL_ADDR =0x07 , +FW_CFG_KERNEL_SIZE =0x08 , +FW_CFG_KERNEL_CMDLINE =0x09 , +FW_CFG_INITRD_ADDR =0x0a , +FW_CFG_INITRD_SIZE =0x0b , +FW_CFG_BOOT_DEVICE =0x0c , +FW_CFG_NUMA =0x0d , +FW_CFG_BOOT_MENU =0x0e , +FW_CFG_MAX_CPUS =0x0f , +FW_CFG_KERNEL_ENTRY =0x10 , +FW_CFG_KERNEL_DATA =0x11 ,
arch/x86/cpu/qemu/fw_cfg.h line 43
Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.h new file +10
-0+FW_CFG_INITRD_DATA =0x12 , +FW_CFG_CMDLINE_ADDR =0x13 , +FW_CFG_CMDLINE_SIZE =0x14 , +FW_CFG_CMDLINE_DATA =0x15 , +FW_CFG_SETUP_ADDR =0x16 , +FW_CFG_SETUP_SIZE =0x17 , +FW_CFG_SETUP_DATA =0x18 , +FW_CFG_FILE_DIR =0x19 , +FW_CFG_FILE_FIRST =0x20 , + FW_CFG_FILE_SLOTS = 0x10,
FW_CFG_FILE_SLOTS should not be a member of enum qemu_fwcfg_items as it describes the number of files.
arch/x86/cpu/qemu/fw_cfg.h line 56
Quoted 13 lines
arch/x86/cpu/qemu/fw_cfg.h new file +13
-0+FW_CFG_WRITE_CHANNEL =0x4000 , +FW_CFG_ARCH_LOCAL =0x8000 , + FW_CFG_INVALID = 0xffff, +}; + +#define FW_CFG_MAX_ENTRY (FW_CFG_FILE_FIRST+FW_CFG_FILE_SLOTS) +#define FW_CFG_ENTRY_MASK ~(FW_CFG_WRITE_CHANNEL | FW_CFG_ARCH_LOCAL) + +#define FW_CFG_MAX_FILE_PATH 56 + +#define QEMU_FW_CFG_SIGNATURE (('Q' << 24) | ('E' << 16) | ('M' << 8) | 'U') + +#define FW_CFG_DMA_ERROR (0x1 << 0)
0x1 -> 1
arch/x86/cpu/qemu/fw_cfg.h line 61
Quoted 5 lines
arch/x86/cpu/qemu/fw_cfg.h new file +5
-0+#define FW_CFG_DMA_READ (0x1 << 1) +#define FW_CFG_DMA_SKIP (0x1 << 2) +#define FW_CFG_DMA_SELECT (0x1 << 3) + +#define FW_CFG_DMA_ENABLED 0x1
(1 << 0)
Quoted 13 lines
arch/x86/cpu/qemu/fw_cfg.h new file +13
-0+ +struct fw_cfg_file { +__be32 size; +__be16 select; +__be16 reserved; +char name[FW_CFG_MAX_FILE_PATH ]; +}; + +struct fw_cfg_files { +__be32 count; +struct fw_cfg_file files[]; +}; +
arch/x86/cpu/qemu/fw_cfg.h line 84
Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.h new file +10
-0+struct fw_cfg_dma_access { +__be32 control; +__be32 length; +__be64 address; +}; + +/** +* Initialize QEMU fw_cfg interface +* +* @retval: None
@return
arch/x86/cpu/qemu/fw_cfg.h line 92
Quoted 8 lines
arch/x86/cpu/qemu/fw_cfg.h new file +8
-0+*/ + +void qemu_fwcfg_init (void ); + +/** +* Get system cpu number +* +* @retval: cpu number in system
@return
Quoted 18 lines
arch/x86/cpu/qemu/fw_cfg.h new file +5
-0+*/ + +int qemu_fwcfg_online_cpus (void ); + +#endif arch/x86/cpu/qemu/qemu.c +1
-0@@ -11,6 +11,7 @@#include <asm/processor.h> #include <asm/arch/device.h> #include <asm/arch/qemu.h> +#include "fw_cfg.h" static bool i440fx;
arch/x86/cpu/qemu/qemu.c static void qemu_chipset_init(void)
Quoted 9 lines
arch/x86/cpu/qemu/qemu.c +2
-1@@ -57,6 +58,8 @@ static void qemu_chipset_init(void)x86_pci_write_config32 (PCI_BDF (0 ,0 ,0 ),PCIEX_BAR ,CONFIG_PCIE_ECAM_BASE |BAR_EN ); } + +qemu_fwcfg_init (); }int arch_cpu_init (void ) --
Regards,
Bin
PATCH v3 1/8 x86: qemu: add fw_cfg support
Hi Bin,
2015-12-30 12:04 GMT+08:00 Bin Meng <[email protected]>:
Quoted 88 lines
Hi Miao,
Quoted 53 lines · Miao Yan
The QEMU
fw_cfginterface allows the guest to retrieve various data information from QEMU. For example, APCI/SMBios tables, number of online cpus, kernel data and command line, etc.This patch adds support for QEMU
fw_cfginterface.Signed-off-by Miao Yan <[email protected]>---
Changes in v2:
- rewrite command handling logic
- various cleanupsChanges in v3:
- fix an error indo_qemu_fw()arch/x86/cpu/qemu/Makefile | 2 +- arch/x86/cpu/qemu/fw_cfg.c | 241 +++++++++++++++++++++++++++++++++++++++++++++ arch/x86/cpu/qemu/fw_cfg.h | 97 ++++++++++++++++++ arch/x86/cpu/qemu/qemu.c | 3 + 4 files changed, 342 insertions(+), 1 deletion(-) create mode 100644 arch/x86/cpu/qemu/fw_cfg.c create mode 100644 arch/x86/cpu/qemu/fw_cfg.harch/x86/cpu/qemu/Makefile +1
-1@@ -7,5 +7,5 @@ ifndef CONFIG_EFI_STUB obj-y += car.o dram.o endif -obj-y += qemu.o +obj-y += qemu.o fw_cfg.o obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi.o dsdt.oarch/x86/cpu/qemu/fw_cfg.c new file +13
-0@@ -0,0 +1,241 @@ +/* +* (C) Copyright 2015 Miao Yan <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#include <common.h> +#include <command.h> +#include <errno.h> +#include <malloc.h> +#include <asm/io.h> +#include "fw_cfg.h" +arch/x86/cpu/qemu/fw_cfg.c line 23
Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.c new file +10
-0+static bool fwcfg_present; +static bool fwcfg_dma_present; + +static void qemu_fwcfg_read_entry_pio (uint16_t entry, +uint32_t size,void *address) +{ +uint32_t i =0 ; +uint8_t *data = address; + +if (entry !=FW_CFG_INVALID )As we discussed in the v1 thread, can you please put a comment block here to describe the QEMU internals (ie: what happens if entry ==
FW_CFG_INVALID)?Quoted 4 lines
arch/x86/cpu/qemu/fw_cfg.c new file +4
-0+outw (entry,FW_CONTROL_PORT ); +while (size--) + data[i++] =inb (FW_DATA_PORT ); +}arch/x86/cpu/qemu/fw_cfg.c line 37
Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.c new file +10
-0+ +static void qemu_fwcfg_read_entry_dma (uint16_t entry, +uint32_t size,void *address) +{ +struct fw_cfg_dma_access dma; + + dma.length =cpu_to_be32 (size); + dma.address =cpu_to_be64 ((uintptr_t )address); + dma.control =cpu_to_be32 (FW_CFG_DMA_READ ); +if (entry !=FW_CFG_INVALID )ditto.
Quoted 14 lines
arch/x86/cpu/qemu/fw_cfg.c line 48
Quoted 11 lines
arch/x86/cpu/qemu/fw_cfg.c new file +11
-0+ dma.control |=cpu_to_be32 (FW_CFG_DMA_SELECT | (entry <<16 )); + +barrier (); + +debug ("qemu_fwcfg_dma_read_entry: addr %p, length %u control 0x%x\n" , + address, size,be32_to_cpu (dma.control)); + +outl (cpu_to_be32 ((uint32_t )&dma),FW_DMA_PORT_HIGH ); + +while (dma.control & ~FW_CFG_DMA_ERROR ) + __asm__ __volatile__ ("pause" );For some reason, with the v3 patch U-Boot hangs here. I changed to use pio to read the entry then U-Boot can boot. Can you please check this?
Removing some checks in v3 exposed a bug with older qemu versions. I'll fix this.
Quoted 347 lines
Quoted 8 lines
arch/x86/cpu/qemu/fw_cfg.c new file +7
-0+} + +static bool qemu_fwcfg_present (void ) +{ +uint32_t qemu; + +qemu_fwcfg_read_entry_pio (FW_CFG_SIGNATURE ,4 , &qemu);arch/x86/cpu/qemu/fw_cfg.c line 65
Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.c new file +10
-0+return be32_to_cpu (qemu) ==QEMU_FW_CFG_SIGNATURE ; +} + +static bool qemu_fwcfg_dma_present (void ) +{ +uint8_t dma_enabled; + +qemu_fwcfg_read_entry_pio (FW_CFG_ID ,1 , &dma_enabled); +if (dma_enabled &FW_CFG_DMA_ENABLED ) +return 1 ;return true;
arch/x86/cpu/qemu/fw_cfg.c line 67
Quoted 2 lines
arch/x86/cpu/qemu/fw_cfg.c new file +2
-0+ +return 0 ;return false;
Quoted 183 lines
arch/x86/cpu/qemu/fw_cfg.c new file +174
-0+} + +static void qemu_fwcfg_read_entry (uint16_t entry, +uint32_t length,void *address) +{ +if (fwcfg_dma_present) +qemu_fwcfg_read_entry_dma (entry, length, address); +else +qemu_fwcfg_read_entry_pio (entry, length, address); +} + +int qemu_fwcfg_online_cpus (void ) +{ +uint16_t nb_cpus; + +if (!fwcfg_present) +return 1 ; + +qemu_fwcfg_read_entry (FW_CFG_NB_CPUS ,2 , &nb_cpus); + +return le16_to_cpu (nb_cpus); +} + +static int qemu_fwcfg_setup_kernel (void *load_addr) +{ +char *data_addr; +uint32_t setup_size, kernel_size, cmdline_size, initrd_size; + +qemu_fwcfg_read_entry (FW_CFG_SETUP_SIZE ,4 , &setup_size); +qemu_fwcfg_read_entry (FW_CFG_KERNEL_SIZE ,4 , &kernel_size); + +if (setup_size ==0 || kernel_size ==0 ) { +printf ("warning: no kernel available\n" ); +return -1 ; + } + + data_addr = load_addr; +qemu_fwcfg_read_entry (FW_CFG_SETUP_DATA , +le32_to_cpu (setup_size), data_addr); + data_addr +=le32_to_cpu (setup_size); + +qemu_fwcfg_read_entry (FW_CFG_KERNEL_DATA , +le32_to_cpu (kernel_size), data_addr); + data_addr +=le32_to_cpu (kernel_size); + +qemu_fwcfg_read_entry (FW_CFG_INITRD_SIZE ,4 , &initrd_size); +if (initrd_size ==0 ) { +printf ("warning: no initrd available\n" ); + }else { +qemu_fwcfg_read_entry (FW_CFG_INITRD_DATA , +le32_to_cpu (initrd_size), data_addr); + data_addr +=le32_to_cpu (initrd_size); + } + +qemu_fwcfg_read_entry (FW_CFG_CMDLINE_SIZE ,4 , &cmdline_size); +qemu_fwcfg_read_entry (FW_CFG_CMDLINE_DATA , +le32_to_cpu (cmdline_size), data_addr); + +printf ("loading kernel to address %p" , load_addr); +if (initrd_size) +printf (" initrd %p\n" , + (char *)load_addr + +le32_to_cpu (setup_size) + +le32_to_cpu (kernel_size)); +else +printf ("\n" ); + +return setenv ("bootargs" , data_addr); +} + +static int qemu_fwcfg_list_firmware (void ) +{ +int i; +uint32_t count; +struct fw_cfg_files *files; + +qemu_fwcfg_read_entry (FW_CFG_FILE_DIR ,4 , &count); +if (!count) +return 0 ; + + count =be32_to_cpu (count); + files =malloc (count *sizeof (struct fw_cfg_file )); +if (!files) +return -ENOMEM ; + + files->count = count; +qemu_fwcfg_read_entry (FW_CFG_INVALID , + count *sizeof (struct fw_cfg_file ), + files->files); + +for (i =0 ; i < files->count; i++) +printf ("%-56s\n" , files->files[i].name); +free (files); +return 0 ; +} + +void qemu_fwcfg_init (void ) +{ + fwcfg_present =qemu_fwcfg_present (); +if (fwcfg_present) + fwcfg_dma_present =qemu_fwcfg_dma_present (); +} + +static int qemu_fwcfg_do_list (cmd_tbl_t *cmdtp,int flag, +int argc,char *const argv[]) +{ +qemu_fwcfg_list_firmware (); + +return 0 ; +} + +static int qemu_fwcfg_do_cpus (cmd_tbl_t *cmdtp,int flag, +int argc,char *const argv[]) +{ +printf ("%d cpu(s) online\n" ,qemu_fwcfg_online_cpus ()); + +return 0 ; +} + +static int qemu_fwcfg_do_load (cmd_tbl_t *cmdtp,int flag, +int argc,char *const argv[]) +{ +void *load_addr; + +if (argc ==1 ) { + load_addr = (void *)simple_strtoul (argv[0 ],NULL ,16 ); + }else { + load_addr =getenv ("loadaddr" ); +if (!load_addr) + load_addr = (void *)CONFIG_SYS_LOAD_ADDR ; +else + load_addr = (void *)simple_strtoul (load_addr, +NULL ,16 ); + } + +return qemu_fwcfg_setup_kernel (load_addr); +} + +static cmd_tbl_t fwcfg_commands[] = { +U_BOOT_CMD_MKENT (list,0 ,1 , qemu_fwcfg_do_list,"" ,"" ), +U_BOOT_CMD_MKENT (cpus,0 ,1 , qemu_fwcfg_do_cpus,"" ,"" ), +U_BOOT_CMD_MKENT (load,1 ,1 , qemu_fwcfg_do_load,"" ,"" ), +}; + +int do_qemu_fw (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[]) +{ +int ret; +cmd_tbl_t *fwcfg_cmd; + +if (!fwcfg_present) { +printf ("QEMU fw_cfg interface not found\n" ); +return CMD_RET_USAGE ; + } + + fwcfg_cmd =find_cmd_tbl (argv[1 ], fwcfg_commands, +ARRAY_SIZE (fwcfg_commands)); + argc -=2 ; + argv +=2 ; +if (!fwcfg_cmd || argc > fwcfg_cmd->maxargs) +return CMD_RET_USAGE ; + + ret = fwcfg_cmd->cmd (fwcfg_cmd, flag, argc, argv); + +return cmd_process_error (fwcfg_cmd, ret); +} + +U_BOOT_CMD ( + fw,3 ,1 , do_qemu_fw, +"QEMU firmware interface" , +"<command>\n" +" - list : print firmware(s) currently loaded\n" +" - cpus : print online cpu number\n" +" - load <addr> : load kernel (if any) to address <addr>, and setup for zboot\n" +)arch/x86/cpu/qemu/fw_cfg.h new file +3
-0@@ -0,0 +1,97 @@ +/* +* (C) Copyright 2015 Miao Yan <[email protected]> +* arch/x86/cpu/qemu/fw_cfg.h line 13
Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.h new file +10
-0+* SPDX-License-Identifier: GPL-2.0+ +*/ + +#ifndef __FW_CFG__ +#define __FW_CFG__ + +#define FW_CONTROL_PORT 0x510 +#define FW_DATA_PORT 0x511 +#define FW_DMA_PORT_LOW 0x514 +#define FW_DMA_PORT_HIGH 0x518Please use tab after the macro name. Please fix this globally in this series.
Quoted 20 lines
arch/x86/cpu/qemu/fw_cfg.h new file +20
-0+ +enum qemu_fwcfg_items { +FW_CFG_SIGNATURE =0x00 , +FW_CFG_ID =0x01 , +FW_CFG_UUID =0x02 , +FW_CFG_RAM_SIZE =0x03 , +FW_CFG_NOGRAPHIC =0x04 , +FW_CFG_NB_CPUS =0x05 , +FW_CFG_MACHINE_ID =0x06 , +FW_CFG_KERNEL_ADDR =0x07 , +FW_CFG_KERNEL_SIZE =0x08 , +FW_CFG_KERNEL_CMDLINE =0x09 , +FW_CFG_INITRD_ADDR =0x0a , +FW_CFG_INITRD_SIZE =0x0b , +FW_CFG_BOOT_DEVICE =0x0c , +FW_CFG_NUMA =0x0d , +FW_CFG_BOOT_MENU =0x0e , +FW_CFG_MAX_CPUS =0x0f , +FW_CFG_KERNEL_ENTRY =0x10 , +FW_CFG_KERNEL_DATA =0x11 ,arch/x86/cpu/qemu/fw_cfg.h line 43
Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.h new file +10
-0+FW_CFG_INITRD_DATA =0x12 , +FW_CFG_CMDLINE_ADDR =0x13 , +FW_CFG_CMDLINE_SIZE =0x14 , +FW_CFG_CMDLINE_DATA =0x15 , +FW_CFG_SETUP_ADDR =0x16 , +FW_CFG_SETUP_SIZE =0x17 , +FW_CFG_SETUP_DATA =0x18 , +FW_CFG_FILE_DIR =0x19 , +FW_CFG_FILE_FIRST =0x20 , + FW_CFG_FILE_SLOTS = 0x10,
FW_CFG_FILE_SLOTSshould not be a member of enumqemu_fwcfg_itemsas it describes the number of files.arch/x86/cpu/qemu/fw_cfg.h line 56
Quoted 13 lines
arch/x86/cpu/qemu/fw_cfg.h new file +13
-0+FW_CFG_WRITE_CHANNEL =0x4000 , +FW_CFG_ARCH_LOCAL =0x8000 , + FW_CFG_INVALID = 0xffff, +}; + +#define FW_CFG_MAX_ENTRY (FW_CFG_FILE_FIRST+FW_CFG_FILE_SLOTS) +#define FW_CFG_ENTRY_MASK ~(FW_CFG_WRITE_CHANNEL | FW_CFG_ARCH_LOCAL) + +#define FW_CFG_MAX_FILE_PATH 56 + +#define QEMU_FW_CFG_SIGNATURE (('Q' << 24) | ('E' << 16) | ('M' << 8) | 'U') + +#define FW_CFG_DMA_ERROR (0x1 << 0)
0x1-> 1arch/x86/cpu/qemu/fw_cfg.h line 61
Quoted 5 lines
arch/x86/cpu/qemu/fw_cfg.h new file +5
-0+#define FW_CFG_DMA_READ (0x1 << 1) +#define FW_CFG_DMA_SKIP (0x1 << 2) +#define FW_CFG_DMA_SELECT (0x1 << 3) + +#define FW_CFG_DMA_ENABLED 0x1(1 << 0)
Quoted 13 lines
arch/x86/cpu/qemu/fw_cfg.h new file +13
-0+ +struct fw_cfg_file { +__be32 size; +__be16 select; +__be16 reserved; +char name[FW_CFG_MAX_FILE_PATH ]; +}; + +struct fw_cfg_files { +__be32 count; +struct fw_cfg_file files[]; +}; +arch/x86/cpu/qemu/fw_cfg.h line 84
Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.h new file +10
-0+struct fw_cfg_dma_access { +__be32 control; +__be32 length; +__be64 address; +}; + +/** +* Initialize QEMU fw_cfg interface +* +* @retval: None @return
arch/x86/cpu/qemu/fw_cfg.h line 92
Quoted 8 lines
arch/x86/cpu/qemu/fw_cfg.h new file +8
-0+*/ + +void qemu_fwcfg_init (void ); + +/** +* Get system cpu number +* +* @retval: cpu number in system @return
Quoted 18 lines
arch/x86/cpu/qemu/fw_cfg.h new file +5
-0+*/ + +int qemu_fwcfg_online_cpus (void ); + +#endif arch/x86/cpu/qemu/qemu.c +1
-0@@ -11,6 +11,7 @@#include <asm/processor.h> #include <asm/arch/device.h> #include <asm/arch/qemu.h> +#include "fw_cfg.h" static bool i440fx;arch/x86/cpu/qemu/qemu.c static void qemu_chipset_init(void)
Quoted 9 lines
arch/x86/cpu/qemu/qemu.c +2
-1@@ -57,6 +58,8 @@ static void qemu_chipset_init(void)x86_pci_write_config32 (PCI_BDF (0 ,0 ,0 ),PCIEX_BAR ,CONFIG_PCIE_ECAM_BASE |BAR_EN ); } + +qemu_fwcfg_init (); }int arch_cpu_init (void ) --Regards,
Bin
PATCH v3 2/8 x86: qemu: add a cpu uclass driver for qemu target
In reply to Miao YanAdd a cpu uclass driver for qemu. Previously, the qemu target gets cpu number from board dts files, which are manually created at compile time. This does not scale when more cpus are assigned to guest as the dts files must be modified as well.
This patch adds a cpu uclass driver for qemu targets to directly read online cpu number from firmware.
---
Changes in v2:
- return int from qemu_fwcfg_online_cpus()
arch/x86/cpu/qemu/Makefile | 2 +- arch/x86/cpu/qemu/cpu.c | 57 ++++++++++++++++++++++++++++++++++++++++ arch/x86/dts/qemu-x86_i440fx.dts | 4 +-- arch/x86/dts/qemu-x86_q35.dts | 4 +-- 4 files changed, 62 insertions(+), 5 deletions(-) create mode 100644 arch/x86/cpu/qemu/cpu.c
arch/x86/cpu/qemu/Makefile +1 -1
@@ -7,5 +7,5 @@ ifndef CONFIG_EFI_STUB obj-y += car.o dram.o endif -obj-y += qemu.o fw_cfg.o +obj-y += qemu.o fw_cfg.o cpu.o obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi.o dsdt.o
arch/x86/cpu/qemu/cpu.c new file +57 -0
57 lines not on this page · raw message
arch/x86/dts/qemu-x86_i440fx.dts +2 -2
@@ -32,14 +32,14 @@ cpu@0 { device_type = "cpu"; - compatible = "cpu-x86"; + compatible = "cpu-qemu"; reg = <0>; intel,apic-id = <0>; }; cpu at 1 { device_type = "cpu"; - compatible = "cpu-x86"; + compatible = "cpu-qemu"; reg = <1>; intel,apic-id = <1>; };
arch/x86/dts/qemu-x86_q35.dts +2 -2
@@ -43,14 +43,14 @@ cpu at 0 { device_type = "cpu"; - compatible = "cpu-x86"; + compatible = "cpu-qemu"; reg = <0>; intel,apic-id = <0>; }; cpu at 1 { device_type = "cpu"; - compatible = "cpu-x86"; + compatible = "cpu-qemu"; reg = <1>; intel,apic-id = <1>; };
Signature · 1 line
1.9.1
PATCH v3 2/8 x86: qemu: add a cpu uclass driver for qemu target
Quoted 6 lines · Miao Yan
Add a cpu uclass driver for qemu. Previously, the qemu target gets cpu number from board dts files, which are manually created at compile time. This does not scale when more cpus are assigned to guest as the dts files must be modified as well.
Quoted 8 lines
This patch adds a cpu uclass driver for qemu targets to directly read online cpu number from firmware.
Signed-off-by <[email protected]>---
Changes in v2:
- return int fromqemu_fwcfg_online_cpus()
PATCH v3 3/8 x86: fix a typo in function name
In reply to Miao YanRename 'find_cpu_by_apid_id' to 'find_cpu_by_apic_id'. This should be a typo.
--- arch/x86/cpu/mp_init.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/x86/cpu/mp_init.c +3 -3
@@ -104,7 +104,7 @@ static void ap_do_flight_plan(struct udevice *cpu) } } -static int find_cpu_by_apid_id (int apic_id,struct udevice **devp) +static int find_cpu_by_apic_id (int apic_id,struct udevice **devp) {struct udevice *dev;
@@ -137,7 +137,7 @@ static void ap_init(unsigned int cpu_index)enable_lapic (); apic_id =lapicid (); - ret =find_cpu_by_apid_id (apic_id, &dev); + ret =find_cpu_by_apic_id (apic_id, &dev);if (ret) {debug ("Unknown CPU apic_id %x\n" , apic_id); goto done;
@@ -432,7 +432,7 @@ static int init_bsp(struct udevice **devp)lapic_setup (); apic_id =lapicid (); - ret =find_cpu_by_apid_id (apic_id, devp); + ret =find_cpu_by_apic_id (apic_id, devp);if (ret) {printf ("Cannot find boot CPU, APIC ID %d\n" , apic_id);return ret;
Signature · 1 line
1.9.1
PATCH v3 3/8 x86: fix a typo in function name
Quoted 8 lines · Miao Yan
Rename '
find_cpu_by_apid_id' to 'find_cpu_by_apic_id'. This should be a typo.Signed-off-by Miao Yan <[email protected]>--- arch/x86/cpu/mp_init.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
PATCH v3 4/8 x86: use actual CPU number for allocating memory
In reply to Miao YanUse actual CPU number, instead of maximum cpu configured, to allocate stack memory in 'load_sipi_vector'
---
Changes in v2:
- fix commit message
arch/x86/cpu/mp_init.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/x86/cpu/mp_init.c +3 -3
@@ -210,7 +210,7 @@ static int save_bsp_msrs(char *start, int size)return msr_count; } -static int load_sipi_vector (atomic_t **ap_countp) +static int load_sipi_vector (atomic_t **ap_countp,int num_cpus) {struct sipi_params_16bit *params16;struct sipi_params *params;
@@ -239,7 +239,7 @@ static int load_sipi_vector(atomic_t **ap_countp) params->idt_ptr = (uint32_t )x86_get_idt (); params->stack_size =CONFIG_AP_STACK_SIZE ; - size = params->stack_size *CONFIG_MAX_CPUS ; + size = params->stack_size * num_cpus; stack =memalign (size,4096 );if (!stack)return -ENOMEM ;
@@ -483,7 +483,7 @@ int mp_init(struct mp_params *p) mp_info.records = p->flight_plan;/* Load the SIPI vector */ - ret =load_sipi_vector (&ap_count); + ret =load_sipi_vector (&ap_count, num_cpus);if (ap_count ==NULL )return -1 ;
Signature · 1 line
1.9.1
PATCH v3 4/8 x86: use actual CPU number for allocating memory
Quoted 11 lines · Miao Yan
Use actual CPU number, instead of maximum cpu configured, to allocate stack memory in '
load_sipi_vector'Signed-off-by Miao Yan <[email protected]>---
Changes in v2:
- fix commit messagearch/x86/cpu/mp_init.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
PATCH v3 5/8 x86: qemu: add qemu_fwcfg_fdt_fixup()
In reply to Miao YanAdd a function to fixup 'cpus' node in dts files for qemu target.
---
Changes in v2:
- various cleanups
arch/x86/cpu/qemu/fw_cfg.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++ arch/x86/cpu/qemu/fw_cfg.h | 11 ++++++++ 2 files changed, 76 insertions(+)
arch/x86/cpu/qemu/fw_cfg.c +65 -0
@@ -9,6 +9,7 @@#include <errno.h> #include <malloc.h> #include <asm/io.h> +#include <libfdt.h> #include "fw_cfg.h" static bool fwcfg_present;
@@ -88,6 +89,70 @@ int qemu_fwcfg_online_cpus(void)return le16_to_cpu (nb_cpus); } +void qemu_fwcfg_fdt_fixup (void *fdt_addr,int cpu_num) +{ +int i; +char cpus[10 ]; +int off, err, sub_off, id; + + off =fdt_path_offset (fdt_addr,"/cpus" ); +if (off != -FDT_ERR_NOTFOUND ) { +printf ("error detecting cpus subnode: %s (%d)\n" , +fdt_strerror (off), off); +return ; + } + + off =fdt_add_subnode (fdt_addr,0 ,"cpus" ); +if (off <0 ) { +printf ("error adding cpus subnode: %s (%d)\n" , +fdt_strerror (off), off); +return ; + } + +for (i = cpu_num -1 ; i >=0 ; i--) { +sprintf (cpus,"%s@%d" ,"cpu" , i); + sub_off =fdt_add_subnode (fdt_addr, off, cpus); +if (sub_off <0 ) { +printf ("error adding subnode cpu %d: %s (%d)\n" , + i,fdt_strerror (sub_off), sub_off); +return ; + } + + id =cpu_to_fdt32 (i); + err =fdt_setprop (fdt_addr, sub_off,"intel,apic-id" , + (void *)&id,sizeof (id)); +if (err <0 ) { +printf ("error adding apic-id %d: %s (%d)\n" , + i,fdt_strerror (err), err); +return ; + } + + err =fdt_setprop (fdt_addr, sub_off,"reg" , + (void *)&id,sizeof (id)); +if (err <0 ) { +printf ("error adding reg %d: %s (%d)\n" , + i,fdt_strerror (err), err); +return ; + } + + err =fdt_setprop (fdt_addr, sub_off,"compatible" , +"cpu-qemu" ,sizeof ("cpu-qemu" )); +if (err <0 ) { +printf ("error adding compatible %d: %s (%d)\n" , + i,fdt_strerror (err), err); +return ; + } + + err =fdt_setprop (fdt_addr, sub_off,"device_type" , +"cpu" ,sizeof ("cpu" )); +if (err <0 ) { +printf ("error adding device_type %d: %s (%d)\n" , + i,fdt_strerror (err), err); +return ; + } + } +} +static int qemu_fwcfg_setup_kernel (void *load_addr) {char *data_addr;
arch/x86/cpu/qemu/fw_cfg.h +11 -0
@@ -94,4 +94,15 @@ void qemu_fwcfg_init(void);int qemu_fwcfg_online_cpus (void ); +/** +* Fix 'cpu' node in device tree for qemu targets +* +* @fdt_addr: device tree blob address +* @cpu_num: cpu number in system +* +* @retval: None +*/ + +void qemu_fwcfg_fdt_fixup (void *fdt_addr,int cpu_num); +#endif
Signature · 1 line
1.9.1
PATCH v3 5/8 x86: qemu: add qemu_fwcfg_fdt_fixup()
Quoted 117 lines · Miao Yan
Add a function to fixup 'cpus' node in dts files for qemu target.
Signed-off-by Miao Yan <[email protected]>---
Changes in v2:
- various cleanupsarch/x86/cpu/qemu/fw_cfg.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++ arch/x86/cpu/qemu/fw_cfg.h | 11 ++++++++ 2 files changed, 76 insertions(+)arch/x86/cpu/qemu/fw_cfg.c +65
-0@@ -9,6 +9,7 @@#include <errno.h> #include <malloc.h> #include <asm/io.h> +#include <libfdt.h> #include "fw_cfg.h" static bool fwcfg_present;@@ -88,6 +89,70 @@ int qemu_fwcfg_online_cpus(void)return le16_to_cpu (nb_cpus); } +void qemu_fwcfg_fdt_fixup (void *fdt_addr,int cpu_num) +{ +int i; +char cpus[10 ]; +int off, err, sub_off, id; + + off =fdt_path_offset (fdt_addr,"/cpus" ); +if (off != -FDT_ERR_NOTFOUND ) { +printf ("error detecting cpus subnode: %s (%d)\n" , +fdt_strerror (off), off); +return ; + } + + off =fdt_add_subnode (fdt_addr,0 ,"cpus" ); +if (off <0 ) { +printf ("error adding cpus subnode: %s (%d)\n" , +fdt_strerror (off), off); +return ; + } + +for (i = cpu_num -1 ; i >=0 ; i--) { +sprintf (cpus,"%s@%d" ,"cpu" , i); + sub_off =fdt_add_subnode (fdt_addr, off, cpus); +if (sub_off <0 ) { +printf ("error adding subnode cpu %d: %s (%d)\n" , + i,fdt_strerror (sub_off), sub_off); +return ; + } + + id =cpu_to_fdt32 (i); + err =fdt_setprop (fdt_addr, sub_off,"intel,apic-id" , + (void *)&id,sizeof (id)); +if (err <0 ) { +printf ("error adding apic-id %d: %s (%d)\n" , + i,fdt_strerror (err), err); +return ; + } + + err =fdt_setprop (fdt_addr, sub_off,"reg" , + (void *)&id,sizeof (id)); +if (err <0 ) { +printf ("error adding reg %d: %s (%d)\n" , + i,fdt_strerror (err), err); +return ; + } + + err =fdt_setprop (fdt_addr, sub_off,"compatible" , +"cpu-qemu" ,sizeof ("cpu-qemu" )); +if (err <0 ) { +printf ("error adding compatible %d: %s (%d)\n" , + i,fdt_strerror (err), err); +return ; + } + + err =fdt_setprop (fdt_addr, sub_off,"device_type" , +"cpu" ,sizeof ("cpu" )); +if (err <0 ) { +printf ("error adding device_type %d: %s (%d)\n" , + i,fdt_strerror (err), err); +return ; + } + } +} +static int qemu_fwcfg_setup_kernel (void *load_addr) {char *data_addr;arch/x86/cpu/qemu/fw_cfg.h +11
-1@@ -94,4 +94,15 @@ void qemu_fwcfg_init(void);int qemu_fwcfg_online_cpus (void ); +/** +* Fix 'cpu' node in device tree for qemu targets +* +* @fdt_addr: device tree blob address +* @cpu_num: cpu number in system +* +* @retval: None +*/ + +void qemu_fwcfg_fdt_fixup (void *fdt_addr,int cpu_num); +#endif --1.9.1
PATCH v3 5/8 x86: qemu: add qemu_fwcfg_fdt_fixup()
In reply to Miao YanQuoted 2 lines · Miao Yan
Add a function to fixup 'cpus' node in dts files for qemu target.
fixup -> fix up
Quoted 9 lines
Signed-off-by Miao Yan <[email protected]>---
Changes in v2:
- various cleanupsarch/x86/cpu/qemu/fw_cfg.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++ arch/x86/cpu/qemu/fw_cfg.h | 11 ++++++++ 2 files changed, 76 insertions(+)
Other than that,
PATCH v3 6/8 x86: qemu: fix up cpu node in device tree
In reply to Miao YanRemove 'cpus' node in dts files for QEMU targets, retrieve cpu number through 'fw_cfg' interface and fix up device tree blob at runtime.
---
Changes in v2:
- rebase to u-boot-x86/next
arch/x86/cpu/qemu/qemu.c | 4 ++++ arch/x86/dts/qemu-x86_i440fx.dts | 19 +------------------ arch/x86/dts/qemu-x86_q35.dts | 19 +------------------ 3 files changed, 6 insertions(+), 36 deletions(-)
arch/x86/cpu/qemu/qemu.c +4 -0
@@ -15,6 +15,8 @@static bool i440fx; +DECLARE_GLOBAL_DATA_PTR ; +static void qemu_chipset_init (void ) {u16 device, xbcs;
@@ -93,6 +95,8 @@ int arch_early_init_r(void) {qemu_chipset_init (); +qemu_fwcfg_fdt_fixup ((void *)gd->fdt_blob,qemu_fwcfg_online_cpus ()); +return 0 ; }
arch/x86/dts/qemu-x86_i440fx.dts +1 -18
@@ -26,24 +26,7 @@ stdout-path = "/serial"; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu at 0 { - device_type = "cpu"; - compatible = "cpu-qemu"; - reg = <0>; - intel,apic-id = <0>; - }; - - cpu at 1 { - device_type = "cpu"; - compatible = "cpu-qemu"; - reg = <1>; - intel,apic-id = <1>; - }; - }; + /* cpu node will be dynamically filled by U-Boot */ tsc-timer { clock-frequency = <1000000000>;
arch/x86/dts/qemu-x86_q35.dts +1 -18
@@ -37,24 +37,7 @@ stdout-path = "/serial"; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu at 0 { - device_type = "cpu"; - compatible = "cpu-qemu"; - reg = <0>; - intel,apic-id = <0>; - }; - - cpu at 1 { - device_type = "cpu"; - compatible = "cpu-qemu"; - reg = <1>; - intel,apic-id = <1>; - }; - }; + /* cpu node will be dynamically filled by U-Boot */ tsc-timer { clock-frequency = <1000000000>;
Signature · 1 line
1.9.1
PATCH v3 6/8 x86: qemu: fix up cpu node in device tree
Quoted 5 lines · Miao Yan
Remove 'cpus' node in dts files for QEMU targets, retrieve cpu number through '
fw_cfg' interface and fix up device tree blob at runtime.Signed-off-by Miao Yan <[email protected]>
Quoted 9 lines
---
Changes in v2:
- rebase to u-boot-x86/nextarch/x86/cpu/qemu/qemu.c | 4 ++++ arch/x86/dts/qemu-x86_i440fx.dts | 19 +------------------ arch/x86/dts/qemu-x86_q35.dts | 19 +------------------ 3 files changed, 6 insertions(+), 36 deletions(-)
PATCH v3 7/8 x86: reserve more spaces for dtb
In reply to Miao YanReserve more spaces for x86 dtb files. Otherwise when booting on qemu targets, fixing 'cpu' node may fail due to lack of space left in dtb.
--- arch/x86/dts/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/dts/Makefile +1 -1
@@ -15,7 +15,7 @@ dtb-y += bayleybay.dtb \ targets += $(dtb-y) -DTC_FLAGS += -R 4 -p 0x1000 +DTC_FLAGS += -R 4 -p 0x3000 PHONY += dtbs dtbs: $(addprefix $(obj)/, $(dtb-y))
Signature · 1 line
1.9.1
PATCH v3 7/8 x86: reserve more spaces for dtb
Hi Miao,
Quoted 14 lines · Miao Yan
Reserve more spaces for x86 dtb files. Otherwise when booting on qemu targets, fixing 'cpu' node may fail due to lack of space left in dtb.
Signed-off-by Miao Yan <[email protected]>--- arch/x86/dts/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/x86/dts/Makefile +0
-0
arch/x86/dts/Makefile dtb-y += bayleybay.dtb \ · line 18
Quoted 5 lines
arch/x86/dts/Makefile +1
-1@@ -15,7 +15,7 @@ dtb-y += bayleybay.dtb \ targets += $(dtb-y) -DTC_FLAGS += -R 4 -p 0x1000 +DTC_FLAGS += -R 4 -p 0x3000
This changes bloat the code size too much. It increase 8KB to all the x86 dtb files. Is there another way to fix this?
arch/x86/dts/Makefile dtb-y += bayleybay.dtb \
Quoted 4 lines
arch/x86/dts/Makefile +0
-1PHONY += dtbs dtbs: $(addprefix $(obj)/, $(dtb-y)) --
Regards,
Bin
PATCH v3 7/8 x86: reserve more spaces for dtb
Hi Bin,
2015-12-30 12:04 GMT+08:00 Bin Meng <[email protected]>:
Quoted 18 lines
Hi Miao,
Quoted 15 lines · Miao Yan
Reserve more spaces for x86 dtb files. Otherwise when booting on qemu targets, fixing 'cpu' node may fail due to lack of space left in dtb.
Signed-off-by Miao Yan <[email protected]>--- arch/x86/dts/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/x86/dts/Makefile +0
-0@@ -15,7 +15,7 @@ dtb-y += bayleybay.dtb \
Quoted 7 lines
arch/x86/dts/Makefile dtb-y += bayleybay.dtb \ · line 18
Quoted 4 lines
arch/x86/dts/Makefile +1
-1targets += $(dtb-y) -DTC_FLAGS += -R 4 -p 0x1000 +DTC_FLAGS += -R 4 -p 0x3000This changes bloat the code size too much. It increase 8KB to all the x86 dtb files. Is there another way to fix this?
I'll drop this patch, and mention that we support 32 cpus in the document, since increasing dtb size for all x86 targets isn't desirable.
Quoted 8 lines
arch/x86/dts/Makefile dtb-y += bayleybay.dtb \
Quoted 5 lines
arch/x86/dts/Makefile +0
-1PHONY += dtbs dtbs: $(addprefix $(obj)/, $(dtb-y)) --Regards,
Bin
PATCH v3 8/8 x86: qemu: add documentaion for the fw_cfg interface
In reply to Miao YanDocument the usage of 'fw' command
---
Changes in v2:
- various cleanup
doc/README.x86 | 36 +++++++++++++++++++++++++++++++++--- 1 file changed, 33 insertions(+), 3 deletions(-)
doc/README.x86 +33 -3
@@ -295,9 +295,39 @@ show QEMU's VGA console window. Note this will disable QEMU's serial output. If you want to check both consoles, use '-serial stdio'. Multicore is also supported by QEMU via '-smp n' where n is the number of cores -to instantiate. Currently the default U-Boot built for QEMU supports 2 cores. -In order to support more cores, you need add additional cpu nodes in the device -tree and change CONFIG_MAX_CPUS accordingly. +to instantiate. U-Boot uses fw_cfg interface provided by QEMU to detect certain +system information, such as cpu number, so 'n' can be any number allowed by +QEMU. + +The fw_cfg interface in QEMU also provides information about kernel data, initrd +,command-line arguments and more. U-Boot supports directly accessing these informtion +from fw_cfg interface, this saves the time of loading them from hard disk or +network again, through emulated devices. To use it , simply providing them in +QEMU command line: + +$ qemu-system-i386 -nographic -bios path/to/u-boot.rom -m 1024 -kernel /path/to/bzImage + -append 'root=/dev/sda1 console=ttyS0' -initrd /path/to/initrd -smp 8 + +Note: -initrd and -smp are both optional + +Then start QEMU, in U-Boot command line use the following U-Boot command to setup kernel: + + => fw +fw - QEMU firmware interface + +Usage: +fw <command> + - list : print firmware(s) currently loaded + - cpus : print online cpu number + - load <addr> : load kernel (if any) to address <addr> + +=> fw load +loading kernel to address 01000000, initrd 015dd010 + +Here the kernel (bzImage) is loaded to 01000000 and initrd is to 0x15dd010. Then, 'zboot' +can be used to boot the kernel: + +=> zboot 01000000 - 015dd010 CPU Microcode -------------
Signature · 1 line
1.9.1
PATCH v3 8/8 x86: qemu: add documentaion for the fw_cfg interface
Hi Miao,
Quoted 44 lines · Miao Yan
Document the usage of 'fw' command
Signed-off-by Miao Yan <[email protected]>---
Changes in v2:
- various cleanupdoc/README.x86 | 36 +++++++++++++++++++++++++++++++++--- 1 file changed, 33 insertions(+), 3 deletions(-)doc/README.x86 +23
-3@@ -295,9 +295,39 @@ show QEMU's VGA console window. Note this will disable QEMU's serial output. If you want to check both consoles, use '-serial stdio'. Multicore is also supported by QEMU via '-smp n' where n is the number of cores -to instantiate. Currently the default U-Boot built for QEMU supports 2 cores. -In order to support more cores, you need add additional cpu nodes in the device -tree and change CONFIG_MAX_CPUS accordingly. +to instantiate. U-Boot uses fw_cfg interface provided by QEMU to detect certain +system information, such as cpu number, so 'n' can be any number allowed by +QEMU. + +The fw_cfg interface in QEMU also provides information about kernel data, initrd +,command-line arguments and more. U-Boot supports directly accessing these informtion +from fw_cfg interface, this saves the time of loading them from hard disk or +network again, through emulated devices. To use it , simply providing them in +QEMU command line: + +$ qemu-system-i386 -nographic -bios path/to/u-boot.rom -m 1024 -kernel /path/to/bzImage + -append 'root=/dev/sda1 console=ttyS0' -initrd /path/to/initrd -smp 8 + +Note: -initrd and -smp are both optional + +Then start QEMU, in U-Boot command line use the following U-Boot command to setup kernel: + + => fw +fw - QEMU firmware interface + +Usage: +fw <command> + - list : print firmware(s) currently loaded
doc/README.x86 show QEMU's VGA console window. Note this will disable QEMU's serial output. · line 330
Quoted 10 lines
doc/README.x86 +10
-0+ - cpus : print online cpu number + - load <addr> : load kernel (if any) to address <addr> + +=> fw load +loading kernel to address 01000000, initrd 015dd010 + +Here the kernel (bzImage) is loaded to 01000000 and initrd is to 0x15dd010. Then, 'zboot' +can be used to boot the kernel: + +=> zboot 01000000 - 015dd010
This still does not work. The last parameter (initrd_size) should not be omitted. Please enhance the 'fw load' command to print out the initrd size.
Did you test the initrd? Kernel does not boot with initird, showing
[ 3.092767] Unpacking initramfs... [ 3.094766] Initramfs unpacking failed: junk in compressed archive
doc/README.x86 show QEMU's VGA console window. Note this will disable QEMU's serial output.
Quoted 4 lines
doc/README.x86 +0
-1CPU Microcode ------------- --
Regards,
Bin
PATCH v3 8/8 x86: qemu: add documentaion for the fw_cfg interface
Hi Bin,
2015-12-30 12:04 GMT+08:00 Bin Meng <[email protected]>:
Quoted 53 lines
Hi Miao,
Quoted 50 lines · Miao Yan
Document the usage of 'fw' command
Signed-off-by Miao Yan <[email protected]>---
Changes in v2:
- various cleanupdoc/README.x86 | 36 +++++++++++++++++++++++++++++++++--- 1 file changed, 33 insertions(+), 3 deletions(-)doc/README.x86 +29
-3@@ -295,9 +295,39 @@ show QEMU's VGA console window. Note this will disable QEMU's serial output. If you want to check both consoles, use '-serial stdio'. Multicore is also supported by QEMU via '-smp n' where n is the number of cores -to instantiate. Currently the default U-Boot built for QEMU supports 2 cores. -In order to support more cores, you need add additional cpu nodes in the device -tree and change CONFIG_MAX_CPUS accordingly. +to instantiate. U-Boot uses fw_cfg interface provided by QEMU to detect certain +system information, such as cpu number, so 'n' can be any number allowed by +QEMU. + +The fw_cfg interface in QEMU also provides information about kernel data, initrd +,command-line arguments and more. U-Boot supports directly accessing these informtion +from fw_cfg interface, this saves the time of loading them from hard disk or +network again, through emulated devices. To use it , simply providing them in +QEMU command line: + +$ qemu-system-i386 -nographic -bios path/to/u-boot.rom -m 1024 -kernel /path/to/bzImage + -append 'root=/dev/sda1 console=ttyS0' -initrd /path/to/initrd -smp 8 + +Note: -initrd and -smp are both optional + +Then start QEMU, in U-Boot command line use the following U-Boot command to setup kernel: + + => fw +fw - QEMU firmware interface + +Usage: +fw <command> + - list : print firmware(s) currently loaded + - cpus : print online cpu number + - load <addr> : load kernel (if any) to address <addr> + +=> fw load +loading kernel to address 01000000, initrd 015dd010 +
Quoted 8 lines
doc/README.x86 show QEMU's VGA console window. Note this will disable QEMU's serial output. · line 330
Quoted 4 lines
doc/README.x86 +4
-0+Here the kernel (bzImage) is loaded to 01000000 and initrd is to 0x15dd010. Then, 'zboot' +can be used to boot the kernel: + +=> zboot 01000000 - 015dd010This still does not work. The last parameter (
initrd_size) should not be omitted. Please enhance the 'fw load' command to print out the initrd size.
OK.
Quoted 5 lines
Did you test the initrd? Kernel does not boot with initird, showing
[ 3.092767] Unpacking initramfs... [ 3.094766] Initramfs unpacking failed: junk in compressed archive
Seems the default load address is overwritten during the process, which somehow impacts initramfs.
I will change that to 02000000 by default, and also initrd_start needs to be page size aligned. I'll fix that too.
Quoted 8 lines
doc/README.x86 show QEMU's VGA console window. Note this will disable QEMU's serial output.
Quoted 5 lines
doc/README.x86 +0
-1CPU Microcode ------------- --Regards,
Bin