mmc: tegra: don't enable UHS modes on Tegra210
Subsystems (3)
PATCH 1/1 mmc: tegra: don't enable UHS modes on Tegra210
Tegra210 needs a different tuning sequence than Tegra30+. Disable UHS modes until support for this is properly added.
---
Ulf,
this is a follow on patch to my Tegra UHS-I series. After reading the Tegra210 TRM I realized that the currently implemented tuning sequence will only work on Tegra30..Tegra124. If you don't keep your tree stable you might want to squash this into [PATCH v2 4/5] mmc: tegra: enable UHS-I modes, otherwise please pick this up as a fix on top.
--- drivers/mmc/host/sdhci-tegra.c | 3 --- 1 file changed, 3 deletions(-)
drivers/mmc/host/sdhci-tegra.c +0 -3
@@ -353,9 +353,6 @@ static const struct sdhci_pltfm_data sdhci_tegra210_pdata = {static const struct sdhci_tegra_soc_data soc_data_tegra210 = { .pdata = &sdhci_tegra210_pdata, - .nvquirks =NVQUIRK_ENABLE_SDR50 | -NVQUIRK_ENABLE_DDR50 | -NVQUIRK_ENABLE_SDR104 , };static const struct of_device_id sdhci_tegra_dt_match[] = {
Signature · 1 line
2.5.0
A message that is not in the archive (sent off-list or not yet received): 1451490549-21430-1-git-send-email-dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org
Thierry Reding
Acked-byQuoted 11 lines · Lucas Stach
Tegra210 needs a different tuning sequence than Tegra30+. Disable UHS modes until support for this is properly added.
Signed-off-by Lucas Stach <[email protected]>---
Ulf,
this is a follow on patch to my Tegra UHS-I series. After reading the Tegra210 TRM I realized that the currently implemented tuning sequence will only work on Tegra30..Tegra124. If you don't keep your tree stable you might want to squash this into [PATCH v2 4/5] mmc: tegra: enable UHS-I modes, otherwise please pick this up as a fix on top.
Quoted 3 lines
--- drivers/mmc/host/sdhci-tegra.c | 3 --- 1 file changed, 3 deletions(-)
Quoted 11 lines · Lucas Stach
Tegra210 needs a different tuning sequence than Tegra30+. Disable UHS modes until support for this is properly added.
Signed-off-by Lucas Stach <[email protected]>---
Ulf,
this is a follow on patch to my Tegra UHS-I series. After reading the Tegra210 TRM I realized that the currently implemented tuning sequence will only work on Tegra30..Tegra124. If you don't keep your tree stable you might want to squash this into [PATCH v2 4/5] mmc: tegra: enable UHS-I modes, otherwise please pick this up as a fix on top.
Thanks, I have squashed the change into patch4.
Kind regards
Uffe
Quoted 25 lines
--- drivers/mmc/host/sdhci-tegra.c | 3 --- 1 file changed, 3 deletions(-)drivers/mmc/host/sdhci-tegra.c +0
-4@@ -353,9 +353,6 @@ static const struct sdhci_pltfm_data sdhci_tegra210_pdata = {static const struct sdhci_tegra_soc_data soc_data_tegra210 = { .pdata = &sdhci_tegra210_pdata, - .nvquirks =NVQUIRK_ENABLE_SDR50 | -NVQUIRK_ENABLE_DDR50 | -NVQUIRK_ENABLE_SDR104 , };static const struct of_device_id sdhci_tegra_dt_match[] = { --2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html