Skip to contentSkip to conversation

Add encoder_mask to crtc_state, v2.

PATCH In review Maarten Lankhorst 4 participants 15 messages Jan 7, 2016 – Feb 9, 2016

Subsystems (3)
lore
Share & tools
lore

Maarten Lankhorst

author maintainer
#0 lore raw

cover Add encoder_mask to crtc_state, v2.

Another attempt at adding encoder_mask, with some behavioral fixes.

Maarten Lankhorst (5):
drm/core: Add drm_encoder_index.
drm/core: Add drm_for_each_encoder_mask, v2. drm/i915: Do not touch best_encoder for load detect. drm/atomic: Do not unset crtc when an encoder is stolen drm/atomic: Add encoder_mask to crtc_state, v2.

 drivers/gpu/drm/drm_atomic_helper.c  | 46 ++++++++++++++++++++++++++++++------
 drivers/gpu/drm/drm_crtc.c           | 23 ++++++++++++++++++
 drivers/gpu/drm/i915/intel_display.c |  5 ++--
 include/drm/drm_crtc.h               | 14 +++++++++++
 4 files changed, 79 insertions(+), 9 deletions(-)
Signature · 6 lines
2.1.0

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#1 lore raw

PATCH 1/5 drm/core: Add drm_encoder_index.

This is useful for adding encoder_mask in crtc_state.

---
 drivers/gpu/drm/drm_crtc.c | 23 +++++++++++++++++++++++
 include/drm/drm_crtc.h     |  1 +
 2 files changed, 24 insertions(+)
drivers/gpu/drm/drm_crtc.c +23 -0
index 62fa95fa5471..b7c990e0c8b4 100644
@@ -1161,6 +1161,29 @@ out_unlock:
 EXPORT_SYMBOL(drm_encoder_init);
 
 /**
+ * drm_encoder_index - find the index of a registered encoder
+ * @encoder: encoder to find index for
+ *
+ * Given a registered encoder, return the index of that encoder within a DRM
+ * device's list of encoders.
+ */
+unsigned int drm_encoder_index(struct drm_encoder *encoder)
+{
+	unsigned int index = 0;
+	struct drm_encoder *tmp;
+
+	drm_for_each_encoder(tmp, encoder->dev) {
+		if (tmp == encoder)
+			return index;
+
+		index++;
+	}
+
+	BUG();
+}
+EXPORT_SYMBOL(drm_encoder_index);
+
+/**
  * drm_encoder_cleanup - cleans up an initialised encoder
  * @encoder: encoder to cleanup
  *
include/drm/drm_crtc.h +1 -0
index c65a212db77e..fd2ace4a18de 100644
@@ -2225,6 +2225,7 @@ int drm_encoder_init(struct drm_device *dev,
 		     struct drm_encoder *encoder,
 		     const struct drm_encoder_funcs *funcs,
 		     int encoder_type, const char *name, ...);
+extern unsigned int drm_encoder_index(struct drm_encoder *encoder);
 
 /**
  * drm_encoder_crtc_ok - can a given crtc drive a given encoder?
Signature · 6 lines
2.1.0

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Reviewed-by on v1 1/5
#2 lore raw

Re: [Intel-gfx] [PATCH 1/5] drm/core: Add drm_encoder_index.

Hi Maarten,

2016-01-07 Maarten Lankhorst <[email protected]>:

Quoted 7 lines

This is useful for adding encoder_mask in crtc_state.

---
 drivers/gpu/drm/drm_crtc.c | 23 +++++++++++++++++++++++
 include/drm/drm_crtc.h     |  1 +
 2 files changed, 24 insertions(+)

Gustavo
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel

author maintainer
#3 lore raw

PATCH 2/5 drm/core: Add drm_for_each_encoder_mask, v2.

In reply to Maarten Lankhorst

This is similar to the other drm_for_each_*_mask functions.

Changes since v1:
- Use for_each_if

---
 include/drm/drm_crtc.h | 11 +++++++++++
 1 file changed, 11 insertions(+)
include/drm/drm_crtc.h +11 -0
index fd2ace4a18de..c0226f945d62 100644
@@ -2153,6 +2153,17 @@ struct drm_mode_config {
 	list_for_each_entry((plane), &(dev)->mode_config.plane_list, head) \
 		for_each_if ((plane_mask) & (1 << drm_plane_index(plane)))
 
+/**
+ * drm_for_each_encoder_mask - iterate over encoders specified by bitmask
+ * @encoder: the loop cursor
+ * @dev: the DRM device
+ * @encoder_mask: bitmask of encoder indices
+ *
+ * Iterate over all encoders specified by bitmask.
+ */
+#define drm_for_each_encoder_mask(encoder, dev, encoder_mask) \
+	list_for_each_entry((encoder), &(dev)->mode_config.encoder_list, head) \
+		for_each_if ((encoder_mask) & (1 << drm_encoder_index(encoder)))
 
 #define obj_to_crtc(x) container_of(x, struct drm_crtc, base)
 #define obj_to_connector(x) container_of(x, struct drm_connector, base)
Signature · 6 lines
2.1.0

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Reviewed-by on v1 2/5
#4 lore raw

Re: [PATCH 2/5] drm/core: Add drm_for_each_encoder_mask, v2.

Hi Maarten,

2016-01-07 Maarten Lankhorst <[email protected]>:

Quoted 9 lines

This is similar to the other drm_for_each_*_mask functions.

Changes since v1:
- Use for_each_if

---
 include/drm/drm_crtc.h | 11 +++++++++++
 1 file changed, 11 insertions(+)

Gustavo
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel

author maintainer
#5 lore raw

PATCH 3/5 drm/i915: Do not touch best_encoder for load detect.

In reply to Maarten Lankhorst

This should only be touched by drm_atomic_helper.

---
 drivers/gpu/drm/i915/intel_display.c | 2 --
 1 file changed, 2 deletions(-)
drivers/gpu/drm/i915/intel_display.c +0 -2
index 391cc7f000da..d77968092ce4 100644
@@ -10549,7 +10549,6 @@ retry:
 	}
 
 	connector_state->crtc = crtc;
-	connector_state->best_encoder = &intel_encoder->base;
 
 	crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
 	if (IS_ERR(crtc_state)) {
@@ -10645,7 +10644,6 @@ void intel_release_load_detect_pipe(struct drm_connector *connector,
 		if (IS_ERR(crtc_state))
 			goto fail;
 
-		connector_state->best_encoder = NULL;
 		connector_state->crtc = NULL;
 
 		crtc_state->base.enable = crtc_state->base.active = false;
Signature · 6 lines
2.1.0

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 3/5
#6 lore raw

Re: [PATCH 3/5] drm/i915: Do not touch best_encoder for load detect.

Hi Maarten,

2016-01-07 Maarten Lankhorst <[email protected]>:

Quoted 6 lines

This should only be touched by drm_atomic_helper.

---
 drivers/gpu/drm/i915/intel_display.c | 2 --
 1 file changed, 2 deletions(-)

Gustavo
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel

author maintainer
#7 lore raw

PATCH 4/5 drm/atomic: Do not unset crtc when an encoder is stolen

In reply to Maarten Lankhorst

While we steal the encoder away from the connector the connector may be updated to use a different encoder.

Without this change if 2 connectors swap encoders one of them will end up without a crtc.

---
 drivers/gpu/drm/drm_atomic_helper.c | 4 ----
 1 file changed, 4 deletions(-)
drivers/gpu/drm/drm_atomic_helper.c +0 -4
index 57cccd68ca52..9c84b3b37631 100644
@@ -134,7 +134,6 @@ steal_encoder(struct drm_atomic_state *state,
 	struct drm_crtc_state *crtc_state;
 	struct drm_connector *connector;
 	struct drm_connector_state *connector_state;
-	int ret;
 
 	/*
 	 * We can only steal an encoder coming from a connector, which means we
@@ -165,9 +164,6 @@ steal_encoder(struct drm_atomic_state *state,
 		if (IS_ERR(connector_state))
 			return PTR_ERR(connector_state);
 
-		ret = drm_atomic_set_crtc_for_connector(connector_state, NULL);
-		if (ret)
-			return ret;
 		connector_state->best_encoder = NULL;
 	}
 
Signature · 6 lines
2.1.0

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Reviewed-by on v1 4/5
#8 lore raw

Re: [PATCH 4/5] drm/atomic: Do not unset crtc when an encoder is stolen

Hi Maarten,

2016-01-07 Maarten Lankhorst <[email protected]>:

Quoted 10 lines

While we steal the encoder away from the connector the connector may be updated to use a different encoder.

Without this change if 2 connectors swap encoders one of them will end up without a crtc.

---
 drivers/gpu/drm/drm_atomic_helper.c | 4 ----
 1 file changed, 4 deletions(-)

Gustavo
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

author maintainer
#9 lore raw

PATCH 5/5 drm/atomic: Add encoder_mask to crtc_state, v2.

In reply to Maarten Lankhorst

This allows iteration over encoders using drm_for_each_encoder_mask without inspecting all connector_states, which requires connection_mutex.

Changes since v1:
- Add a set_best_encoder helper function and update encoder_mask inside it.

---
 drivers/gpu/drm/drm_atomic_helper.c  | 42 +++++++++++++++++++++++++++++++++---
 drivers/gpu/drm/i915/intel_display.c |  3 +++
 include/drm/drm_crtc.h               |  2 ++
 3 files changed, 44 insertions(+), 3 deletions(-)
drivers/gpu/drm/drm_atomic_helper.c +39 -3
index 9c84b3b37631..a33c7a2aaa78 100644
@@ -125,6 +125,41 @@ get_current_crtc_for_encoder(struct drm_device *dev,
 	return NULL;
 }
 
+static void
+set_best_encoder(struct drm_atomic_state *state,
+		 struct drm_connector_state *conn_state,
+		 struct drm_encoder *encoder)
+{
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc *crtc;
+
+	if (conn_state->best_encoder) {
+		/* Unset the encoder_mask in the old crtc state. */
+		crtc = conn_state->connector->state->crtc;
+
+		WARN_ON(!crtc);
+		if (crtc) {
+			crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
+
+			crtc_state->encoder_mask &=
+				~(1 << drm_encoder_index(conn_state->best_encoder));
+		}
+	}
+
+	if (encoder) {
+		crtc = conn_state->crtc;
+		WARN_ON(!crtc);
+		if (crtc) {
+			crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
+
+			crtc_state->encoder_mask |=
+				1 << drm_encoder_index(encoder);
+		}
+	}
+
+	conn_state->best_encoder = encoder;
+}
+
 static int
 steal_encoder(struct drm_atomic_state *state,
 	      struct drm_encoder *encoder,
@@ -164,7 +199,7 @@ steal_encoder(struct drm_atomic_state *state,
 		if (IS_ERR(connector_state))
 			return PTR_ERR(connector_state);
 
-		connector_state->best_encoder = NULL;
+		set_best_encoder(state, connector_state, NULL);
 	}
 
 	return 0;
@@ -212,7 +247,7 @@ update_connector_routing(struct drm_atomic_state *state, int conn_idx)
 				connector->base.id,
 				connector->name);
 
-		connector_state->best_encoder = NULL;
+		set_best_encoder(state, connector_state, NULL);
 
 		return 0;
 	}
@@ -275,7 +310,8 @@ update_connector_routing(struct drm_atomic_state *state, int conn_idx)
 	if (WARN_ON(!connector_state->crtc))
 		return -EINVAL;
 
-	connector_state->best_encoder = new_encoder;
+	set_best_encoder(state, connector_state, new_encoder);
+
 	idx = drm_crtc_index(connector_state->crtc);
 
 	crtc_state = state->crtc_states[idx];
drivers/gpu/drm/i915/intel_display.c +3 -0
index d77968092ce4..2d9cc848f294 100644
@@ -15604,6 +15604,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
 		crtc->base.state->active = crtc->active;
 		crtc->base.enabled = crtc->active;
 		crtc->base.state->connector_mask = 0;
+		crtc->base.state->encoder_mask = 0;
 
 		/* Because we only establish the connector -> encoder ->
 		 * crtc links if something is active, this means the
@@ -15843,6 +15844,8 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 				 */
 				encoder->base.crtc->state->connector_mask |=
 					1 << drm_connector_index(&connector->base);
+				encoder->base.crtc->state->encoder_mask |=
+					1 << drm_encoder_index(&encoder->base);
 			}
 
 		} else {
include/drm/drm_crtc.h +2 -0
index c0226f945d62..51287f36b214 100644
@@ -307,6 +307,7 @@ struct drm_plane_helper_funcs;
  * @connectors_changed: connectors to this crtc have been updated
  * @plane_mask: bitmask of (1 << drm_plane_index(plane)) of attached planes
  * @connector_mask: bitmask of (1 << drm_connector_index(connector)) of attached connectors
+ * @encoder_mask: bitmask of (1 << drm_encoder_index(encoder)) of attached encoders
  * @last_vblank_count: for helpers and drivers to capture the vblank of the
  * 	update to ensure framebuffer cleanup isn't done too early
  * @adjusted_mode: for use by helpers and drivers to compute adjusted mode timings
@@ -341,6 +342,7 @@ struct drm_crtc_state {
 	u32 plane_mask;
 
 	u32 connector_mask;
+	u32 encoder_mask;
 
 	/* last_vblank_count: for vblank waits before cleanup */
 	u32 last_vblank_count;
Signature · 6 lines
2.1.0

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#10 lore raw

Re: [PATCH 5/5] drm/atomic: Add encoder_mask to crtc_state, v2.

A diff to make this v3. Found when running this through IGT bat.

- Keeping an encoder but moving it to a different crtc resulted, in encoder_mask not being updated.
- Add some paranoia when best_encoder was already updated to a different encoder in steal_encoder. This could happen in theory.
- Relax the WARN_ON(!crtc) when resuming after resume and add an explanation what the WARN_ON is for.
---

drivers/gpu/drm/drm_atomic_helper.c +12 -1
index 1ac35072e14f..e5534dc9c4b4 100644
@@ -137,7 +137,13 @@ set_best_encoder(struct drm_atomic_state *state,
 		/* Unset the encoder_mask in the old crtc state. */
 		crtc = conn_state->connector->state->crtc;
 
-		WARN_ON(!crtc);
+		/* A NULL crtc is an error here because we should have
+		 *  duplicated a NULL best_encoder when crtc was NULL.
+		 * As an exception restoring duplicated atomic state
+		 * during resume is allowed, so don't warn when
+		 * best_encoder is equal to encoder we intend to set.
+		 */
+		WARN_ON(!crtc && encoder != conn_state->best_encoder);
 		if (crtc) {
 			crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
 
@@ -199,6 +205,9 @@ steal_encoder(struct drm_atomic_state *state,
 		if (IS_ERR(connector_state))
 			return PTR_ERR(connector_state);
 
+		if (connector_state->best_encoder != encoder)
+			continue;
+
 		set_best_encoder(state, connector_state, NULL);
 	}
 
@@ -276,6 +285,8 @@ update_connector_routing(struct drm_atomic_state *state, int conn_idx)
 	}
 
 	if (new_encoder == connector_state->best_encoder) {
+		set_best_encoder(state, connector_state, new_encoder);
+
 		DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] keeps [ENCODER:%d:%s], now on [CRTC:%d:%s]\n",
 				 connector->base.id,
 				 connector->name,

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel

author maintainer
#11 lore raw

PATCH v3 5/5 drm/atomic: Add encoder_mask to crtc_state, v3.

In reply to Maarten Lankhorst

This allows iteration over encoders without requiring connection_mutex.

Changes since v1:
- Add a set_best_encoder helper function and update encoder_mask inside it.
Changes since v2:
- Relax the WARN_ON(!crtc), with explanation.
- Call set_best_encoder when connector is moved between crtc's.
- Add some paranoia to steal_encoder to prevent accidentally setting best_encoder to NULL.

---

drivers/gpu/drm/drm_atomic_helper.c +50 -3
index 9c84b3b37631..391b3783e341 100644
@@ -125,6 +125,47 @@ get_current_crtc_for_encoder(struct drm_device *dev,
 	return NULL;
 }
 
+static void
+set_best_encoder(struct drm_atomic_state *state,
+		 struct drm_connector_state *conn_state,
+		 struct drm_encoder *encoder)
+{
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc *crtc;
+
+	if (conn_state->best_encoder) {
+		/* Unset the encoder_mask in the old crtc state. */
+		crtc = conn_state->connector->state->crtc;
+
+		/* A NULL crtc is an error here because we should have
+		 *  duplicated a NULL best_encoder when crtc was NULL.
+		 * As an exception restoring duplicated atomic state
+		 * during resume is allowed, so don't warn when
+		 * best_encoder is equal to encoder we intend to set.
+		 */
+		WARN_ON(!crtc && encoder != conn_state->best_encoder);
+		if (crtc) {
+			crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
+
+			crtc_state->encoder_mask &=
+				~(1 << drm_encoder_index(conn_state->best_encoder));
+		}
+	}
+
+	if (encoder) {
+		crtc = conn_state->crtc;
+		WARN_ON(!crtc);
+		if (crtc) {
+			crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
+
+			crtc_state->encoder_mask |=
+				1 << drm_encoder_index(encoder);
+		}
+	}
+
+	conn_state->best_encoder = encoder;
+}
+
 static int
 steal_encoder(struct drm_atomic_state *state,
 	      struct drm_encoder *encoder,
@@ -164,7 +205,10 @@ steal_encoder(struct drm_atomic_state *state,
 		if (IS_ERR(connector_state))
 			return PTR_ERR(connector_state);
 
-		connector_state->best_encoder = NULL;
+		if (connector_state->best_encoder != encoder)
+			continue;
+
+		set_best_encoder(state, connector_state, NULL);
 	}
 
 	return 0;
@@ -212,7 +256,7 @@ update_connector_routing(struct drm_atomic_state *state, int conn_idx)
 				connector->base.id,
 				connector->name);
 
-		connector_state->best_encoder = NULL;
+		set_best_encoder(state, connector_state, NULL);
 
 		return 0;
 	}
@@ -241,6 +285,8 @@ update_connector_routing(struct drm_atomic_state *state, int conn_idx)
 	}
 
 	if (new_encoder == connector_state->best_encoder) {
+		set_best_encoder(state, connector_state, new_encoder);
+
 		DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] keeps [ENCODER:%d:%s], now on [CRTC:%d:%s]\n",
 				 connector->base.id,
 				 connector->name,
@@ -275,7 +321,8 @@ update_connector_routing(struct drm_atomic_state *state, int conn_idx)
 	if (WARN_ON(!connector_state->crtc))
 		return -EINVAL;
 
-	connector_state->best_encoder = new_encoder;
+	set_best_encoder(state, connector_state, new_encoder);
+
 	idx = drm_crtc_index(connector_state->crtc);
 
 	crtc_state = state->crtc_states[idx];
drivers/gpu/drm/i915/intel_display.c +3 -0
index d77968092ce4..2d9cc848f294 100644
@@ -15604,6 +15604,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
 		crtc->base.state->active = crtc->active;
 		crtc->base.enabled = crtc->active;
 		crtc->base.state->connector_mask = 0;
+		crtc->base.state->encoder_mask = 0;
 
 		/* Because we only establish the connector -> encoder ->
 		 * crtc links if something is active, this means the
@@ -15843,6 +15844,8 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 				 */
 				encoder->base.crtc->state->connector_mask |=
 					1 << drm_connector_index(&connector->base);
+				encoder->base.crtc->state->encoder_mask |=
+					1 << drm_encoder_index(&encoder->base);
 			}
 
 		} else {
include/drm/drm_crtc.h +2 -0
index c0226f945d62..51287f36b214 100644
@@ -307,6 +307,7 @@ struct drm_plane_helper_funcs;
  * @connectors_changed: connectors to this crtc have been updated
  * @plane_mask: bitmask of (1 << drm_plane_index(plane)) of attached planes
  * @connector_mask: bitmask of (1 << drm_connector_index(connector)) of attached connectors
+ * @encoder_mask: bitmask of (1 << drm_encoder_index(encoder)) of attached encoders
  * @last_vblank_count: for helpers and drivers to capture the vblank of the
  * 	update to ensure framebuffer cleanup isn't done too early
  * @adjusted_mode: for use by helpers and drivers to compute adjusted mode timings
@@ -341,6 +342,7 @@ struct drm_crtc_state {
 	u32 plane_mask;
 
 	u32 connector_mask;
+	u32 encoder_mask;
 
 	/* last_vblank_count: for vblank waits before cleanup */
 	u32 last_vblank_count;

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reviewed-by on v3 5/5
#12 lore raw

Re: [PATCH v3 5/5] drm/atomic: Add encoder_mask to crtc_state, v3.

Hi Maarten,

2016-01-28 Maarten Lankhorst <[email protected]>:

Quoted 11 lines

This allows iteration over encoders without requiring connection_mutex.

Changes since v1:
- Add a set_best_encoder helper function and update encoder_mask inside it.
Changes since v2:
- Relax the WARN_ON(!crtc), with explanation.
- Call set_best_encoder when connector is moved between crtc's.
- Add some paranoia to steal_encoder to prevent accidentally setting best_encoder to NULL.

Quoted 1 line

Gustavo
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel

#13 lore raw

Re: [PATCH v3 5/5] drm/atomic: Add encoder_mask to crtc_state, v3.

Quoted 15 lines · Gustavo Padovan

Hi Maarten,

2016-01-28 Maarten Lankhorst <[email protected]>:

Quoted 11 lines

This allows iteration over encoders without requiring connection_mutex.

Changes since v1:
- Add a set_best_encoder helper function and update encoder_mask inside it.
Changes since v2:
- Relax the WARN_ON(!crtc), with explanation.
- Call set_best_encoder when connector is moved between crtc's.
- Add some paranoia to steal_encoder to prevent accidentally setting best_encoder to NULL.

Quoted 3 lines
Quoted 1 line

All merged to drm-misc, thanks.
-Daniel

Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#14 lore raw

✗ warning: Fi.CI.BAT

In reply to Maarten Lankhorst
== Summary ==

== Summary ==

Built on ff88655b3a5467bbc3be8c67d3e05ebf182557d3 drm-intel-nightly: 2016y-01m-11d-07h-30m-16s UTC integration manifest

Test gem_storedw_loop:

        Subgroup basic-render:
                dmesg-warn -> PASS       (bdw-ultra)
                dmesg-warn -> PASS       (skl-i7k-2) UNSTABLE
Test kms_flip:
        Subgroup basic-flip-vs-dpms:
                dmesg-warn -> PASS       (ilk-hp8440p)
        Subgroup basic-flip-vs-modeset:
                pass       -> DMESG-WARN (ilk-hp8440p)
Test kms_pipe_crc_basic:
        Subgroup read-crc-pipe-b:
                dmesg-warn -> PASS       (byt-nuc)
bdw-ultra        total:138  pass:132  dwarn:0   dfail:0   fail:0   skip:6  
bsw-nuc-2        total:141  pass:114  dwarn:3   dfail:0   fail:0   skip:24 
byt-nuc          total:141  pass:119  dwarn:7   dfail:0   fail:0   skip:15 
hsw-brixbox      total:141  pass:134  dwarn:0   dfail:0   fail:0   skip:7  
hsw-gt2          total:141  pass:137  dwarn:0   dfail:0   fail:0   skip:4  
hsw-xps12        total:138  pass:133  dwarn:1   dfail:0   fail:0   skip:4  
ilk-hp8440p      total:141  pass:100  dwarn:4   dfail:0   fail:0   skip:37 
skl-i5k-2        total:141  pass:132  dwarn:1   dfail:0   fail:0   skip:8  
skl-i7k-2        total:141  pass:132  dwarn:1   dfail:0   fail:0   skip:8  
snb-dellxps      total:141  pass:122  dwarn:5   dfail:0   fail:0   skip:14 
snb-x220t        total:141  pass:122  dwarn:5   dfail:0   fail:1   skip:13 

Results at /archive/results/CI_IGT_test/Patchwork_1110/

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx