Skip to contentSkip to conversation

Minor Arizona MFD Cleanups

PATCH New Charles Keepax 1 participant 8 messages Jan 18, 2016

Subsystems (3)
Multifunction devices (MFD) Wolfson microelectronics drivers Cirrus logic madera codec drivers
lore
Share & tools
lore

Charles Keepax

author
#0 lore raw

cover Minor Arizona MFD Cleanups

Hi,

This series fixes up a bunch of register defaults in the Arizona devices and sorts a few Kconfig options.

Thanks,
Charles

Charles Keepax (7):
mfd: wm5110: Fix defaults array based on testing
mfd: wm5102: Fix defaults array based on testing
mfd: wm8998: Fix defaults array based on testing
mfd: cs47l24: Fix defaults array based on testing
mfd: arizona: Remove duplicate select of MFD_CORE
mfd: arizona: Update small typo in Arizona SPI Kconfig
mfd: arizona: Allow building Arizona MFD as a module

 drivers/mfd/Kconfig          |  6 ++--
 drivers/mfd/Makefile         | 18 +++++-----
 drivers/mfd/arizona-core.c   |  4 +++
 drivers/mfd/cs47l24-tables.c | 10 +-----
 drivers/mfd/wm5102-tables.c  | 16 +++------
 drivers/mfd/wm5110-tables.c  | 82 ++++++++++++++++++++------------------------
 drivers/mfd/wm8998-tables.c  | 12 ++-----
 7 files changed, 59 insertions(+), 89 deletions(-)
Signature · 1 line
2.1.4
author
#1 lore raw

PATCH 1/7 mfd: wm5110: Fix defaults array based on testing

My automated test is back and now can check defaults against the actual hardware. This patch updates the defaults array for the differences detected and removes a couple of completely unused registers.

Signed-off-by Charles Keepax <[email protected]>
---
 drivers/mfd/wm5110-tables.c | 82 ++++++++++++++++++++-------------------------
 1 file changed, 37 insertions(+), 45 deletions(-)
drivers/mfd/wm5110-tables.c +37 -45
index c18e11f..8e74e71 100644
@@ -676,8 +676,8 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000008, 0x0019 },    /* R8     - Ctrl IF SPI CFG 1 */
 	{ 0x00000009, 0x0001 },    /* R9     - Ctrl IF I2C1 CFG 1 */
 	{ 0x0000000A, 0x0001 },    /* R10    - Ctrl IF I2C2 CFG 1 */
-	{ 0x0000000B, 0x0036 },    /* R11    - Ctrl IF I2C1 CFG 2 */
-	{ 0x0000000C, 0x0036 },    /* R12    - Ctrl IF I2C2 CFG 2 */
+	{ 0x0000000B, 0x001A },    /* R11    - Ctrl IF I2C1 CFG 2 */
+	{ 0x0000000C, 0x001A },    /* R12    - Ctrl IF I2C2 CFG 2 */
 	{ 0x00000020, 0x0000 },    /* R32    - Tone Generator 1 */
 	{ 0x00000021, 0x1000 },    /* R33    - Tone Generator 2 */
 	{ 0x00000022, 0x0000 },    /* R34    - Tone Generator 3 */

@@ -723,14 +723,12 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000154, 0x0000 },    /* R340   - Rate Estimator 3 */
 	{ 0x00000155, 0x0000 },    /* R341   - Rate Estimator 4 */
 	{ 0x00000156, 0x0000 },    /* R342   - Rate Estimator 5 */
-	{ 0x00000171, 0x0000 },    /* R369   - FLL1 Control 1 */
+	{ 0x00000171, 0x0002 },    /* R369   - FLL1 Control 1 */
 	{ 0x00000172, 0x0008 },    /* R370   - FLL1 Control 2 */
 	{ 0x00000173, 0x0018 },    /* R371   - FLL1 Control 3 */
 	{ 0x00000174, 0x007D },    /* R372   - FLL1 Control 4 */
 	{ 0x00000175, 0x0006 },    /* R373   - FLL1 Control 5 */
 	{ 0x00000176, 0x0000 },    /* R374   - FLL1 Control 6 */
-	{ 0x00000177, 0x0281 },    /* R375   - FLL1 Loop Filter Test 1 */
-	{ 0x00000178, 0x0000 },    /* R376   - FLL1 NCO Test 0 */
 	{ 0x00000179, 0x0000 },    /* R376   - FLL1 Control 7 */
 	{ 0x00000181, 0x0000 },    /* R385   - FLL1 Synchroniser 1 */
 	{ 0x00000182, 0x0000 },    /* R386   - FLL1 Synchroniser 2 */

@@ -740,15 +738,13 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000186, 0x0000 },    /* R390   - FLL1 Synchroniser 6 */
 	{ 0x00000187, 0x0001 },    /* R390   - FLL1 Synchroniser 7 */
 	{ 0x00000189, 0x0000 },    /* R393   - FLL1 Spread Spectrum */
-	{ 0x0000018A, 0x0004 },    /* R394   - FLL1 GPIO Clock */
-	{ 0x00000191, 0x0000 },    /* R401   - FLL2 Control 1 */
+	{ 0x0000018A, 0x000C },    /* R394   - FLL1 GPIO Clock */
+	{ 0x00000191, 0x0002 },    /* R401   - FLL2 Control 1 */
 	{ 0x00000192, 0x0008 },    /* R402   - FLL2 Control 2 */
 	{ 0x00000193, 0x0018 },    /* R403   - FLL2 Control 3 */
 	{ 0x00000194, 0x007D },    /* R404   - FLL2 Control 4 */
 	{ 0x00000195, 0x000C },    /* R405   - FLL2 Control 5 */
 	{ 0x00000196, 0x0000 },    /* R406   - FLL2 Control 6 */
-	{ 0x00000197, 0x0000 },    /* R407   - FLL2 Loop Filter Test 1 */
-	{ 0x00000198, 0x0000 },    /* R408   - FLL2 NCO Test 0 */
 	{ 0x00000199, 0x0000 },    /* R408   - FLL2 Control 7 */
 	{ 0x000001A1, 0x0000 },    /* R417   - FLL2 Synchroniser 1 */
 	{ 0x000001A2, 0x0000 },    /* R418   - FLL2 Synchroniser 2 */

@@ -758,7 +754,7 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x000001A6, 0x0000 },    /* R422   - FLL2 Synchroniser 6 */
 	{ 0x000001A7, 0x0001 },    /* R422   - FLL2 Synchroniser 7 */
 	{ 0x000001A9, 0x0000 },    /* R425   - FLL2 Spread Spectrum */
-	{ 0x000001AA, 0x0004 },    /* R426   - FLL2 GPIO Clock */
+	{ 0x000001AA, 0x000C },    /* R426   - FLL2 GPIO Clock */
 	{ 0x00000200, 0x0006 },    /* R512   - Mic Charge Pump 1 */
 	{ 0x00000210, 0x0184 },    /* R528   - LDO1 Control 1 */
 	{ 0x00000213, 0x03E4 },    /* R531   - LDO2 Control 1 */

@@ -771,9 +767,9 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x000002A3, 0x1102 },    /* R675   - Mic Detect 1 */
 	{ 0x000002A4, 0x009F },    /* R676   - Mic Detect 2 */
 	{ 0x000002A6, 0x3737 },    /* R678   - Mic Detect Level 1 */
-	{ 0x000002A7, 0x372C },    /* R679   - Mic Detect Level 2 */
+	{ 0x000002A7, 0x2C37 },    /* R679   - Mic Detect Level 2 */
 	{ 0x000002A8, 0x1422 },    /* R680   - Mic Detect Level 3 */
-	{ 0x000002A9, 0x300A },    /* R681   - Mic Detect Level 4 */
+	{ 0x000002A9, 0x030A },    /* R681   - Mic Detect Level 4 */
 	{ 0x000002C3, 0x0000 },    /* R707   - Mic noise mix control 1 */
 	{ 0x000002CB, 0x0000 },    /* R715   - Isolation control */
 	{ 0x000002D3, 0x0000 },    /* R723   - Jack detect analogue */

@@ -810,53 +806,53 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000409, 0x0022 },    /* R1033  - Output Volume Ramp */
 	{ 0x00000410, 0x0080 },    /* R1040  - Output Path Config 1L */
 	{ 0x00000411, 0x0180 },    /* R1041  - DAC Digital Volume 1L */
-	{ 0x00000412, 0x0080 },    /* R1042  - DAC Volume Limit 1L */
+	{ 0x00000412, 0x0081 },    /* R1042  - DAC Volume Limit 1L */
 	{ 0x00000413, 0x0001 },    /* R1043  - Noise Gate Select 1L */
 	{ 0x00000414, 0x0080 },    /* R1044  - Output Path Config 1R */
 	{ 0x00000415, 0x0180 },    /* R1045  - DAC Digital Volume 1R */
-	{ 0x00000416, 0x0080 },    /* R1046  - DAC Volume Limit 1R */
+	{ 0x00000416, 0x0081 },    /* R1046  - DAC Volume Limit 1R */
 	{ 0x00000417, 0x0002 },    /* R1047  - Noise Gate Select 1R */
 	{ 0x00000418, 0x0080 },    /* R1048  - Output Path Config 2L */
 	{ 0x00000419, 0x0180 },    /* R1049  - DAC Digital Volume 2L */
-	{ 0x0000041A, 0x0080 },    /* R1050  - DAC Volume Limit 2L */
+	{ 0x0000041A, 0x0081 },    /* R1050  - DAC Volume Limit 2L */
 	{ 0x0000041B, 0x0004 },    /* R1051  - Noise Gate Select 2L */
 	{ 0x0000041C, 0x0080 },    /* R1052  - Output Path Config 2R */
 	{ 0x0000041D, 0x0180 },    /* R1053  - DAC Digital Volume 2R */
-	{ 0x0000041E, 0x0080 },    /* R1054  - DAC Volume Limit 2R */
+	{ 0x0000041E, 0x0081 },    /* R1054  - DAC Volume Limit 2R */
 	{ 0x0000041F, 0x0008 },    /* R1055  - Noise Gate Select 2R */
 	{ 0x00000420, 0x0080 },    /* R1056  - Output Path Config 3L */
 	{ 0x00000421, 0x0180 },    /* R1057  - DAC Digital Volume 3L */
-	{ 0x00000422, 0x0080 },    /* R1058  - DAC Volume Limit 3L */
+	{ 0x00000422, 0x0081 },    /* R1058  - DAC Volume Limit 3L */
 	{ 0x00000423, 0x0010 },    /* R1059  - Noise Gate Select 3L */
 	{ 0x00000424, 0x0080 },    /* R1060  - Output Path Config 3R */
 	{ 0x00000425, 0x0180 },    /* R1061  - DAC Digital Volume 3R */
-	{ 0x00000426, 0x0080 },    /* R1062  - DAC Volume Limit 3R */
+	{ 0x00000426, 0x0081 },    /* R1062  - DAC Volume Limit 3R */
 	{ 0x00000427, 0x0020 },    /* R1063  - Noise Gate Select 3R */
 	{ 0x00000428, 0x0000 },    /* R1064  - Output Path Config 4L */
 	{ 0x00000429, 0x0180 },    /* R1065  - DAC Digital Volume 4L */
-	{ 0x0000042A, 0x0080 },    /* R1066  - Out Volume 4L */
+	{ 0x0000042A, 0x0081 },    /* R1066  - Out Volume 4L */
 	{ 0x0000042B, 0x0040 },    /* R1067  - Noise Gate Select 4L */
 	{ 0x0000042C, 0x0000 },    /* R1068  - Output Path Config 4R */
 	{ 0x0000042D, 0x0180 },    /* R1069  - DAC Digital Volume 4R */
-	{ 0x0000042E, 0x0080 },    /* R1070  - Out Volume 4R */
+	{ 0x0000042E, 0x0081 },    /* R1070  - Out Volume 4R */
 	{ 0x0000042F, 0x0080 },    /* R1071  - Noise Gate Select 4R */
 	{ 0x00000430, 0x0000 },    /* R1072  - Output Path Config 5L */
 	{ 0x00000431, 0x0180 },    /* R1073  - DAC Digital Volume 5L */
-	{ 0x00000432, 0x0080 },    /* R1074  - DAC Volume Limit 5L */
+	{ 0x00000432, 0x0081 },    /* R1074  - DAC Volume Limit 5L */
 	{ 0x00000433, 0x0100 },    /* R1075  - Noise Gate Select 5L */
 	{ 0x00000434, 0x0000 },    /* R1076  - Output Path Config 5R */
 	{ 0x00000435, 0x0180 },    /* R1077  - DAC Digital Volume 5R */
-	{ 0x00000436, 0x0080 },    /* R1078  - DAC Volume Limit 5R */
+	{ 0x00000436, 0x0081 },    /* R1078  - DAC Volume Limit 5R */
 	{ 0x00000437, 0x0200 },    /* R1079  - Noise Gate Select 5R */
 	{ 0x00000438, 0x0000 },    /* R1080  - Output Path Config 6L */
 	{ 0x00000439, 0x0180 },    /* R1081  - DAC Digital Volume 6L */
-	{ 0x0000043A, 0x0080 },    /* R1082  - DAC Volume Limit 6L */
+	{ 0x0000043A, 0x0081 },    /* R1082  - DAC Volume Limit 6L */
 	{ 0x0000043B, 0x0400 },    /* R1083  - Noise Gate Select 6L */
 	{ 0x0000043C, 0x0000 },    /* R1084  - Output Path Config 6R */
 	{ 0x0000043D, 0x0180 },    /* R1085  - DAC Digital Volume 6R */
-	{ 0x0000043E, 0x0080 },    /* R1086  - DAC Volume Limit 6R */
+	{ 0x0000043E, 0x0081 },    /* R1086  - DAC Volume Limit 6R */
 	{ 0x0000043F, 0x0800 },    /* R1087  - Noise Gate Select 6R */
-	{ 0x00000440, 0x8FFF },    /* R1088  - DRE Enable */
+	{ 0x00000440, 0x003F },    /* R1088  - DRE Enable */
 	{ 0x00000450, 0x0000 },    /* R1104  - DAC AEC Control 1 */
 	{ 0x00000458, 0x0000 },    /* R1112  - Noise Gate Control */
 	{ 0x00000490, 0x0069 },    /* R1168  - PDM SPK1 CTRL 1 */

@@ -864,8 +860,8 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000492, 0x0069 },    /* R1170  - PDM SPK2 CTRL 1 */
 	{ 0x00000493, 0x0000 },    /* R1171  - PDM SPK2 CTRL 2 */
 	{ 0x000004A0, 0x3480 },    /* R1184  - HP1 Short Circuit Ctrl */
-	{ 0x000004A1, 0x3480 },    /* R1185  - HP2 Short Circuit Ctrl */
-	{ 0x000004A2, 0x3480 },    /* R1186  - HP3 Short Circuit Ctrl */
+	{ 0x000004A1, 0x3400 },    /* R1185  - HP2 Short Circuit Ctrl */
+	{ 0x000004A2, 0x3400 },    /* R1186  - HP3 Short Circuit Ctrl */
 	{ 0x00000500, 0x000C },    /* R1280  - AIF1 BCLK Ctrl */
 	{ 0x00000501, 0x0008 },    /* R1281  - AIF1 Tx Pin Ctrl */
 	{ 0x00000502, 0x0000 },    /* R1282  - AIF1 Rx Pin Ctrl */

@@ -1483,23 +1479,23 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000C10, 0x1000 },    /* R3088  - GPIO Debounce Config */
 	{ 0x00000C18, 0x0000 },    /* R3096  - GP Switch 1 */
 	{ 0x00000C20, 0x8002 },    /* R3104  - Misc Pad Ctrl 1 */
-	{ 0x00000C21, 0x8001 },    /* R3105  - Misc Pad Ctrl 2 */
+	{ 0x00000C21, 0x0001 },    /* R3105  - Misc Pad Ctrl 2 */
 	{ 0x00000C22, 0x0000 },    /* R3106  - Misc Pad Ctrl 3 */
 	{ 0x00000C23, 0x0000 },    /* R3107  - Misc Pad Ctrl 4 */
 	{ 0x00000C24, 0x0000 },    /* R3108  - Misc Pad Ctrl 5 */
 	{ 0x00000C25, 0x0000 },    /* R3109  - Misc Pad Ctrl 6 */
-	{ 0x00000C30, 0x8282 },    /* R3120  - Misc Pad Ctrl 7 */
-	{ 0x00000C31, 0x0082 },    /* R3121  - Misc Pad Ctrl 8 */
-	{ 0x00000C32, 0x8282 },    /* R3122  - Misc Pad Ctrl 9 */
-	{ 0x00000C33, 0x8282 },    /* R3123  - Misc Pad Ctrl 10 */
-	{ 0x00000C34, 0x8282 },    /* R3124  - Misc Pad Ctrl 11 */
-	{ 0x00000C35, 0x8282 },    /* R3125  - Misc Pad Ctrl 12 */
-	{ 0x00000C36, 0x8282 },    /* R3126  - Misc Pad Ctrl 13 */
-	{ 0x00000C37, 0x8282 },    /* R3127  - Misc Pad Ctrl 14 */
-	{ 0x00000C38, 0x8282 },    /* R3128  - Misc Pad Ctrl 15 */
-	{ 0x00000C39, 0x8282 },    /* R3129  - Misc Pad Ctrl 16 */
-	{ 0x00000C3A, 0x8282 },    /* R3130  - Misc Pad Ctrl 17 */
-	{ 0x00000C3B, 0x8282 },    /* R3131  - Misc Pad Ctrl 18 */
+	{ 0x00000C30, 0x0404 },    /* R3120  - Misc Pad Ctrl 7 */
+	{ 0x00000C31, 0x0004 },    /* R3121  - Misc Pad Ctrl 8 */
+	{ 0x00000C32, 0x0404 },    /* R3122  - Misc Pad Ctrl 9 */
+	{ 0x00000C33, 0x0404 },    /* R3123  - Misc Pad Ctrl 10 */
+	{ 0x00000C34, 0x0404 },    /* R3124  - Misc Pad Ctrl 11 */
+	{ 0x00000C35, 0x0404 },    /* R3125  - Misc Pad Ctrl 12 */
+	{ 0x00000C36, 0x0404 },    /* R3126  - Misc Pad Ctrl 13 */
+	{ 0x00000C37, 0x0404 },    /* R3127  - Misc Pad Ctrl 14 */
+	{ 0x00000C38, 0x0004 },    /* R3128  - Misc Pad Ctrl 15 */
+	{ 0x00000C39, 0x0404 },    /* R3129  - Misc Pad Ctrl 16 */
+	{ 0x00000C3A, 0x0404 },    /* R3130  - Misc Pad Ctrl 17 */
+	{ 0x00000C3B, 0x0404 },    /* R3131  - Misc Pad Ctrl 18 */
 	{ 0x00000D08, 0xFFFF },    /* R3336  - Interrupt Status 1 Mask */
 	{ 0x00000D09, 0xFFFF },    /* R3337  - Interrupt Status 2 Mask */
 	{ 0x00000D0A, 0xFFFF },    /* R3338  - Interrupt Status 3 Mask */

@@ -1641,7 +1637,7 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000F0D, 0x0000 },    /* R3853  - ANC Coefficient */
 	{ 0x00000F0E, 0x0000 },    /* R3854  - ANC Coefficient */
 	{ 0x00000F0F, 0x0000 },    /* R3855  - ANC Coefficient */
-	{ 0x00000F10, 0x0000 },    /* R3856  - ANC Coefficient */
+	{ 0x00000F10, 0x0001 },    /* R3856  - ANC Coefficient */
 	{ 0x00000F11, 0x0000 },    /* R3857  - ANC Coefficient */
 	{ 0x00000F12, 0x0000 },    /* R3858  - ANC Coefficient */
 	{ 0x00000F15, 0x0000 },    /* R3861  - FCL Filter Control */

@@ -1947,8 +1943,6 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_FLL1_CONTROL_5:
 	case ARIZONA_FLL1_CONTROL_6:
 	case ARIZONA_FLL1_CONTROL_7:
-	case ARIZONA_FLL1_LOOP_FILTER_TEST_1:
-	case ARIZONA_FLL1_NCO_TEST_0:
 	case ARIZONA_FLL1_SYNCHRONISER_1:
 	case ARIZONA_FLL1_SYNCHRONISER_2:
 	case ARIZONA_FLL1_SYNCHRONISER_3:

@@ -1965,8 +1959,6 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_FLL2_CONTROL_5:
 	case ARIZONA_FLL2_CONTROL_6:
 	case ARIZONA_FLL2_CONTROL_7:
-	case ARIZONA_FLL2_LOOP_FILTER_TEST_1:
-	case ARIZONA_FLL2_NCO_TEST_0:
 	case ARIZONA_FLL2_SYNCHRONISER_1:
 	case ARIZONA_FLL2_SYNCHRONISER_2:
 	case ARIZONA_FLL2_SYNCHRONISER_3:
Signature · 1 line
2.1.4
author
#2 lore raw

PATCH 2/7 mfd: wm5102: Fix defaults array based on testing

In reply to Charles Keepax

My automated test is back and now can check defaults against the actual hardware. This patch updates the defaults array for the differences detected and removes a couple of completely unused registers.

Signed-off-by Charles Keepax <[email protected]>
---
 drivers/mfd/wm5102-tables.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)
drivers/mfd/wm5102-tables.c +4 -12
index 0386eaf..ab8b23b 100644
@@ -297,7 +297,6 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000174, 0x007D },   /* R372   - FLL1 Control 4 */ 
 	{ 0x00000175, 0x0004 },   /* R373   - FLL1 Control 5 */ 
 	{ 0x00000176, 0x0000 },   /* R374   - FLL1 Control 6 */ 
-	{ 0x00000177, 0x0181 },   /* R375   - FLL1 Loop Filter Test 1 */ 
 	{ 0x00000179, 0x0000 },   /* R377   - FLL1 Control 7 */
 	{ 0x00000181, 0x0000 },   /* R385   - FLL1 Synchroniser 1 */ 
 	{ 0x00000182, 0x0000 },   /* R386   - FLL1 Synchroniser 2 */ 

@@ -314,7 +313,6 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000194, 0x007D },   /* R404   - FLL2 Control 4 */ 
 	{ 0x00000195, 0x0004 },   /* R405   - FLL2 Control 5 */ 
 	{ 0x00000196, 0x0000 },   /* R406   - FLL2 Control 6 */ 
-	{ 0x00000197, 0x0000 },   /* R407   - FLL2 Loop Filter Test 1 */ 
 	{ 0x00000199, 0x0000 },   /* R409   - FLL2 Control 7 */
 	{ 0x000001A1, 0x0000 },   /* R417   - FLL2 Synchroniser 1 */ 
 	{ 0x000001A2, 0x0000 },   /* R418   - FLL2 Synchroniser 2 */ 

@@ -338,7 +336,7 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x000002A3, 0x1102 },   /* R675   - Mic Detect 1 */ 
 	{ 0x000002A4, 0x009F },   /* R676   - Mic Detect 2 */ 
 	{ 0x000002A6, 0x3737 },   /* R678   - Mic Detect Level 1 */
-	{ 0x000002A7, 0x372C },   /* R679   - Mic Detect Level 2 */
+	{ 0x000002A7, 0x2C37 },   /* R679   - Mic Detect Level 2 */
 	{ 0x000002A8, 0x1422 },   /* R680   - Mic Detect Level 3 */
 	{ 0x000002A9, 0x030A },   /* R681   - Mic Detect Level 4 */
 	{ 0x000002C3, 0x0000 },   /* R707   - Mic noise mix control 1 */ 

@@ -402,7 +400,7 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000435, 0x0180 },   /* R1077  - DAC Digital Volume 5R */ 
 	{ 0x00000436, 0x0081 },   /* R1078  - DAC Volume Limit 5R */
 	{ 0x00000437, 0x0200 },   /* R1079  - Noise Gate Select 5R */
-	{ 0x00000440, 0x8FFF },   /* R1088  - DRE Enable */
+	{ 0x00000440, 0x0FFF },   /* R1088  - DRE Enable */
 	{ 0x00000442, 0x3F0A },   /* R1090  - DRE Control 2 */
 	{ 0x00000443, 0xDC1F },   /* R1090  - DRE Control 3 */
 	{ 0x00000450, 0x0000 },   /* R1104  - DAC AEC Control 1 */ 

@@ -863,7 +861,7 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000C0F, 0x0400 },   /* R3087  - IRQ CTRL 1 */ 
 	{ 0x00000C10, 0x1000 },   /* R3088  - GPIO Debounce Config */ 
 	{ 0x00000C20, 0x8002 },   /* R3104  - Misc Pad Ctrl 1 */ 
-	{ 0x00000C21, 0x8001 },   /* R3105  - Misc Pad Ctrl 2 */ 
+	{ 0x00000C21, 0x0001 },   /* R3105  - Misc Pad Ctrl 2 */
 	{ 0x00000C22, 0x0000 },   /* R3106  - Misc Pad Ctrl 3 */ 
 	{ 0x00000C23, 0x0000 },   /* R3107  - Misc Pad Ctrl 4 */ 
 	{ 0x00000C24, 0x0000 },   /* R3108  - Misc Pad Ctrl 5 */ 

@@ -984,7 +982,7 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000ECD, 0x0000 },   /* R3789  - HPLPF4_2 */ 
 	{ 0x00000EE0, 0x0000 },   /* R3808  - ASRC_ENABLE */ 
 	{ 0x00000EE2, 0x0000 },   /* R3810  - ASRC_RATE1 */ 
-	{ 0x00000EE3, 0x0400 },   /* R3811  - ASRC_RATE2 */
+	{ 0x00000EE3, 0x4000 },   /* R3811  - ASRC_RATE2 */
 	{ 0x00000EF0, 0x0000 },   /* R3824  - ISRC 1 CTRL 1 */ 
 	{ 0x00000EF1, 0x0000 },   /* R3825  - ISRC 1 CTRL 2 */ 
 	{ 0x00000EF2, 0x0000 },   /* R3826  - ISRC 1 CTRL 3 */ 

@@ -1062,8 +1060,6 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_FLL1_CONTROL_4:
 	case ARIZONA_FLL1_CONTROL_5:
 	case ARIZONA_FLL1_CONTROL_6:
-	case ARIZONA_FLL1_LOOP_FILTER_TEST_1:
-	case ARIZONA_FLL1_NCO_TEST_0:
 	case ARIZONA_FLL1_CONTROL_7:
 	case ARIZONA_FLL1_SYNCHRONISER_1:
 	case ARIZONA_FLL1_SYNCHRONISER_2:

@@ -1080,8 +1076,6 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_FLL2_CONTROL_4:
 	case ARIZONA_FLL2_CONTROL_5:
 	case ARIZONA_FLL2_CONTROL_6:
-	case ARIZONA_FLL2_LOOP_FILTER_TEST_1:
-	case ARIZONA_FLL2_NCO_TEST_0:
 	case ARIZONA_FLL2_CONTROL_7:
 	case ARIZONA_FLL2_SYNCHRONISER_1:
 	case ARIZONA_FLL2_SYNCHRONISER_2:

@@ -1849,8 +1843,6 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg)
 	case ARIZONA_HAPTICS_STATUS:
 	case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS:
 	case ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS:
-	case ARIZONA_FLL1_NCO_TEST_0:
-	case ARIZONA_FLL2_NCO_TEST_0:
 	case ARIZONA_DAC_COMP_1:
 	case ARIZONA_DAC_COMP_2:
 	case ARIZONA_DAC_COMP_3:
Signature · 1 line
2.1.4
author
#3 lore raw

PATCH 3/7 mfd: wm8998: Fix defaults array based on testing

In reply to Charles Keepax

My automated test is back and now can check defaults against the actual hardware. This patch updates the defaults array for the differences detected and removes a couple of completely unused registers.

Signed-off-by Charles Keepax <[email protected]>
---
 drivers/mfd/wm8998-tables.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)
drivers/mfd/wm8998-tables.c +2 -10
index 4c2dce77..a0de300 100644
@@ -229,8 +229,6 @@ static const struct reg_default wm8998_reg_default[] = {
 	{ 0x00000174, 0x007D },    /* R372   - FLL1 Control 4 */
 	{ 0x00000175, 0x0004 },    /* R373   - FLL1 Control 5 */
 	{ 0x00000176, 0x0000 },    /* R374   - FLL1 Control 6 */
-	{ 0x00000177, 0x0181 },    /* R375   - FLL1 Loop Filter Test 1 */
-	{ 0x00000178, 0x0000 },    /* R376   - FLL1 NCO Test 0 */
 	{ 0x00000179, 0x0000 },    /* R377   - FLL1 Control 7 */
 	{ 0x00000181, 0x0000 },    /* R385   - FLL1 Synchroniser 1 */
 	{ 0x00000182, 0x0000 },    /* R386   - FLL1 Synchroniser 2 */

@@ -247,8 +245,6 @@ static const struct reg_default wm8998_reg_default[] = {
 	{ 0x00000194, 0x007D },    /* R404   - FLL2 Control 4 */
 	{ 0x00000195, 0x0004 },    /* R405   - FLL2 Control 5 */
 	{ 0x00000196, 0x0000 },    /* R406   - FLL2 Control 6 */
-	{ 0x00000197, 0x0000 },    /* R407   - FLL2 Loop Filter Test 1 */
-	{ 0x00000198, 0x0000 },    /* R408   - FLL2 NCO Test 0 */
 	{ 0x00000199, 0x0000 },    /* R409   - FLL2 Control 7 */
 	{ 0x000001A1, 0x0000 },    /* R417   - FLL2 Synchroniser 1 */
 	{ 0x000001A2, 0x0000 },    /* R418   - FLL2 Synchroniser 2 */

@@ -320,7 +316,7 @@ static const struct reg_default wm8998_reg_default[] = {
 	{ 0x00000434, 0x0000 },    /* R1076  - Output Path Config 5R */
 	{ 0x00000435, 0x0180 },    /* R1077  - DAC Digital Volume 5R */
 	{ 0x00000437, 0x0200 },    /* R1079  - Noise Gate Select 5R */
-	{ 0x00000440, 0x8FFF },    /* R1088  - DRE Enable */
+	{ 0x00000440, 0x002F },    /* R1088  - DRE Enable */
 	{ 0x00000441, 0xC759 },    /* R1089  - DRE Control 1 */
 	{ 0x00000442, 0x2A08 },    /* R1089  - DRE Control 2 */
 	{ 0x00000443, 0x5CFA },    /* R1089  - DRE Control 3 */

@@ -686,7 +682,7 @@ static const struct reg_default wm8998_reg_default[] = {
 	{ 0x00000C10, 0x1000 },    /* R3088  - GPIO Debounce Config */
 	{ 0x00000C18, 0x0000 },    /* R3096  - GP Switch 1 */
 	{ 0x00000C20, 0x8002 },    /* R3104  - Misc Pad Ctrl 1 */
-	{ 0x00000C21, 0x8001 },    /* R3105  - Misc Pad Ctrl 2 */
+	{ 0x00000C21, 0x0001 },    /* R3105  - Misc Pad Ctrl 2 */
 	{ 0x00000C22, 0x0000 },    /* R3106  - Misc Pad Ctrl 3 */
 	{ 0x00000C23, 0x0000 },    /* R3107  - Misc Pad Ctrl 4 */
 	{ 0x00000C24, 0x0000 },    /* R3108  - Misc Pad Ctrl 5 */

@@ -888,8 +884,6 @@ static bool wm8998_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_FLL1_CONTROL_5:
 	case ARIZONA_FLL1_CONTROL_6:
 	case ARIZONA_FLL1_CONTROL_7:
-	case ARIZONA_FLL1_LOOP_FILTER_TEST_1:
-	case ARIZONA_FLL1_NCO_TEST_0:
 	case ARIZONA_FLL1_SYNCHRONISER_1:
 	case ARIZONA_FLL1_SYNCHRONISER_2:
 	case ARIZONA_FLL1_SYNCHRONISER_3:

@@ -906,8 +900,6 @@ static bool wm8998_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_FLL2_CONTROL_5:
 	case ARIZONA_FLL2_CONTROL_6:
 	case ARIZONA_FLL2_CONTROL_7:
-	case ARIZONA_FLL2_LOOP_FILTER_TEST_1:
-	case ARIZONA_FLL2_NCO_TEST_0:
 	case ARIZONA_FLL2_SYNCHRONISER_1:
 	case ARIZONA_FLL2_SYNCHRONISER_2:
 	case ARIZONA_FLL2_SYNCHRONISER_3:
Signature · 1 line
2.1.4
author
#4 lore raw

PATCH 4/7 mfd: cs47l24: Fix defaults array based on testing

In reply to Charles Keepax

My automated test is back and now can check defaults against the actual hardware. This patch updates the defaults array for the differences detected and removes a couple of completely unused registers.

Signed-off-by Charles Keepax <[email protected]>
---
 drivers/mfd/cs47l24-tables.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)
drivers/mfd/cs47l24-tables.c +1 -9
index 8708006..f6b78aa 100644
@@ -227,8 +227,6 @@ static const struct reg_default cs47l24_reg_default[] = {
 	{ 0x00000174, 0x007D },    /* R372   - FLL1 Control 4 */
 	{ 0x00000175, 0x0006 },    /* R373   - FLL1 Control 5 */
 	{ 0x00000176, 0x0000 },    /* R374   - FLL1 Control 6 */
-	{ 0x00000177, 0x0281 },    /* R375   - FLL1 Loop Filter Test 1 */
-	{ 0x00000178, 0x0000 },    /* R376   - FLL1 NCO Test 0 */
 	{ 0x00000179, 0x0000 },    /* R376   - FLL1 Control 7 */
 	{ 0x00000181, 0x0000 },    /* R385   - FLL1 Synchroniser 1 */
 	{ 0x00000182, 0x0000 },    /* R386   - FLL1 Synchroniser 2 */

@@ -245,8 +243,6 @@ static const struct reg_default cs47l24_reg_default[] = {
 	{ 0x00000194, 0x007D },    /* R404   - FLL2 Control 4 */
 	{ 0x00000195, 0x000C },    /* R405   - FLL2 Control 5 */
 	{ 0x00000196, 0x0000 },    /* R406   - FLL2 Control 6 */
-	{ 0x00000197, 0x0000 },    /* R407   - FLL2 Loop Filter Test 1 */
-	{ 0x00000198, 0x0000 },    /* R408   - FLL2 NCO Test 0 */
 	{ 0x00000199, 0x0000 },    /* R408   - FLL2 Control 7 */
 	{ 0x000001A1, 0x0000 },    /* R417   - FLL2 Synchroniser 1 */
 	{ 0x000001A2, 0x0000 },    /* R418   - FLL2 Synchroniser 2 */

@@ -678,7 +674,7 @@ static const struct reg_default cs47l24_reg_default[] = {
 	{ 0x00000C0F, 0x0400 },    /* R3087  - IRQ CTRL 1 */
 	{ 0x00000C10, 0x1000 },    /* R3088  - GPIO Debounce Config */
 	{ 0x00000C20, 0x0002 },    /* R3104  - Misc Pad Ctrl 1 */
-	{ 0x00000C21, 0x8001 },    /* R3105  - Misc Pad Ctrl 2 */
+	{ 0x00000C21, 0x0000 },    /* R3105  - Misc Pad Ctrl 2 */
 	{ 0x00000C22, 0x0000 },    /* R3106  - Misc Pad Ctrl 3 */
 	{ 0x00000C23, 0x0000 },    /* R3107  - Misc Pad Ctrl 4 */
 	{ 0x00000C24, 0x0000 },    /* R3108  - Misc Pad Ctrl 5 */

@@ -858,8 +854,6 @@ static bool cs47l24_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_FLL1_CONTROL_5:
 	case ARIZONA_FLL1_CONTROL_6:
 	case ARIZONA_FLL1_CONTROL_7:
-	case ARIZONA_FLL1_LOOP_FILTER_TEST_1:
-	case ARIZONA_FLL1_NCO_TEST_0:
 	case ARIZONA_FLL1_SYNCHRONISER_1:
 	case ARIZONA_FLL1_SYNCHRONISER_2:
 	case ARIZONA_FLL1_SYNCHRONISER_3:

@@ -876,8 +870,6 @@ static bool cs47l24_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_FLL2_CONTROL_5:
 	case ARIZONA_FLL2_CONTROL_6:
 	case ARIZONA_FLL2_CONTROL_7:
-	case ARIZONA_FLL2_LOOP_FILTER_TEST_1:
-	case ARIZONA_FLL2_NCO_TEST_0:
 	case ARIZONA_FLL2_SYNCHRONISER_1:
 	case ARIZONA_FLL2_SYNCHRONISER_2:
 	case ARIZONA_FLL2_SYNCHRONISER_3:
Signature · 1 line
2.1.4
author
#5 lore raw

PATCH 5/7 mfd: arizona: Remove duplicate select of MFD_CORE

In reply to Charles Keepax

MFD_ARIZONA_I2C and MFD_ARIZONA_SPI both select MFD_ARIZONA and all three of those select MFD_CORE, this makes the selects of MFD_CORE in MFD_ARIZONA_I2C and MFD_ARIZONA_SPI redundant, so we remove them.

Signed-off-by Charles Keepax <[email protected]>
---
 drivers/mfd/Kconfig | 2 --
 1 file changed, 2 deletions(-)
drivers/mfd/Kconfig +0 -2
index 9ca66de..4e5493e 100644
@@ -1372,7 +1372,6 @@ config MFD_ARIZONA
 config MFD_ARIZONA_I2C
 	tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with I2C"
 	select MFD_ARIZONA
-	select MFD_CORE
 	select REGMAP_I2C
 	depends on I2C
 	help

@@ -1382,7 +1381,6 @@ config MFD_ARIZONA_I2C
 config MFD_ARIZONA_SPI
 	tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with SPI"
 	select MFD_ARIZONA
-	select MFD_CORE
 	select REGMAP_SPI
 	depends on SPI_MASTER
 	help
Signature · 1 line
2.1.4
author
#6 lore raw

PATCH 6/7 mfd: arizona: Update small typo in Arizona SPI Kconfig

In reply to Charles Keepax

The help text had a copy and paste error and refers to I2C in the SPI section. This patch corrects this typo.

Signed-off-by Charles Keepax <[email protected]>
---
 drivers/mfd/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mfd/Kconfig +1 -1
index 4e5493e..949d7fc 100644
@@ -1385,7 +1385,7 @@ config MFD_ARIZONA_SPI
 	depends on SPI_MASTER
 	help
 	  Support for the Cirrus Logic/Wolfson Microelectronics Arizona platform
-	  audio SoC core functionality controlled via I2C.
+	  audio SoC core functionality controlled via SPI.
 
 config MFD_CS47L24
 	bool "Cirrus Logic CS47L24 and WM1831"
Signature · 1 line
2.1.4
author
#7 lore raw

PATCH 7/7 mfd: arizona: Allow building Arizona MFD as a module

In reply to Charles Keepax

There is nothing that prevents us building the Arizona MFD as a module, this patch enables this.

Signed-off-by Charles Keepax <[email protected]>
---
 drivers/mfd/Kconfig        |  2 +-
 drivers/mfd/Makefile       | 18 +++++++++---------
 drivers/mfd/arizona-core.c |  4 ++++
 3 files changed, 14 insertions(+), 10 deletions(-)
drivers/mfd/Kconfig +1 -1
index 949d7fc..ed41ad9 100644
@@ -1367,7 +1367,7 @@ config MFD_ARIZONA
 	select REGMAP
 	select REGMAP_IRQ
 	select MFD_CORE
-	bool
+	tristate
 
 config MFD_ARIZONA_I2C
 	tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with I2C"
drivers/mfd/Makefile +9 -9
index 0f230a6..bd57faa 100644
@@ -35,25 +35,25 @@ obj-$(CONFIG_MFD_T7L66XB)	+= t7l66xb.o tmio_core.o
 obj-$(CONFIG_MFD_TC6387XB)	+= tc6387xb.o tmio_core.o
 obj-$(CONFIG_MFD_TC6393XB)	+= tc6393xb.o tmio_core.o
 
-obj-$(CONFIG_MFD_ARIZONA)	+= arizona-core.o
-obj-$(CONFIG_MFD_ARIZONA)	+= arizona-irq.o
-obj-$(CONFIG_MFD_ARIZONA_I2C)	+= arizona-i2c.o
-obj-$(CONFIG_MFD_ARIZONA_SPI)	+= arizona-spi.o
+arizona-objs			:= arizona-core.o arizona-irq.o
 ifeq ($(CONFIG_MFD_WM5102),y)
-obj-$(CONFIG_MFD_ARIZONA)	+= wm5102-tables.o
+arizona-objs			+= wm5102-tables.o
 endif
 ifeq ($(CONFIG_MFD_WM5110),y)
-obj-$(CONFIG_MFD_ARIZONA)	+= wm5110-tables.o
+arizona-objs			+= wm5110-tables.o
 endif
 ifeq ($(CONFIG_MFD_WM8997),y)
-obj-$(CONFIG_MFD_ARIZONA)	+= wm8997-tables.o
+arizona-objs			+= wm8997-tables.o
 endif
 ifeq ($(CONFIG_MFD_WM8998),y)
-obj-$(CONFIG_MFD_ARIZONA)	+= wm8998-tables.o
+arizona-objs			+= wm8998-tables.o
 endif
 ifeq ($(CONFIG_MFD_CS47L24),y)
-obj-$(CONFIG_MFD_ARIZONA)	+= cs47l24-tables.o
+arizona-objs			+= cs47l24-tables.o
 endif
+obj-$(CONFIG_MFD_ARIZONA)	+= arizona.o
+obj-$(CONFIG_MFD_ARIZONA_I2C)	+= arizona-i2c.o
+obj-$(CONFIG_MFD_ARIZONA_SPI)	+= arizona-spi.o
 obj-$(CONFIG_MFD_WM8400)	+= wm8400-core.o
 wm831x-objs			:= wm831x-core.o wm831x-irq.o wm831x-otp.o
 wm831x-objs			+= wm831x-auxadc.o
drivers/mfd/arizona-core.c +4 -0
index 5319f25..53134e7 100644
@@ -1519,3 +1519,7 @@ int arizona_dev_exit(struct arizona *arizona)
 	return 0;
 }
 EXPORT_SYMBOL_GPL(arizona_dev_exit);
+
+MODULE_DESCRIPTION("Arizona MFD Core");
+MODULE_LICENSE("GPL");
+MODULE_SOFTDEP("pre: arizona-ldo1");
Signature · 1 line
2.1.4