iio:pressure:Kconfig white space cleanup.
Jonathan Cameron
maintainerPATCH 1/1 iio:pressure:Kconfig white space cleanup.
Clearly a high degree of cut and paste has gone on in this file, propogating a particularly random combination of tabs and spaces. This patch at least should make it all consistent going forward.
Signed-off-by Jonathan Cameron <[email protected]>
--- drivers/iio/pressure/Kconfig | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-)
drivers/iio/pressure/Kconfig +15 -15
@@ -10,11 +10,11 @@ config BMP280 depends on I2C select REGMAP_I2C help - Say yes here to build support for Bosch Sensortec BMP280 - pressure and temperature sensor. + Say yes here to build support for Bosch Sensortec BMP280 + pressure and temperature sensor. - To compile this driver as a module, choose M here: the module - will be called bmp280. + To compile this driver as a module, choose M here: the module + will be called bmp280. config HID_SENSOR_PRESS depends on HID_SENSOR_HUB
@@ -27,8 +27,8 @@ config HID_SENSOR_PRESS Say yes here to build support for the HID SENSOR Pressure driver - To compile this driver as a module, choose M here: the module - will be called hid-sensor-press. + To compile this driver as a module, choose M here: the module + will be called hid-sensor-press. config MPL115 tristate
@@ -41,8 +41,8 @@ config MPL115_I2C Say yes here to build support for the Freescale MPL115A2 pressure sensor connected via I2C. - To compile this driver as a module, choose M here: the module - will be called mpl115_i2c. + To compile this driver as a module, choose M here: the module + will be called mpl115_i2c. config MPL115_SPI tristate "Freescale MPL115A1 pressure sensor driver"
@@ -52,8 +52,8 @@ config MPL115_SPI Say yes here to build support for the Freescale MPL115A1 pressure sensor connected via SPI. - To compile this driver as a module, choose M here: the module - will be called mpl115_spi. + To compile this driver as a module, choose M here: the module + will be called mpl115_spi. config MPL3115 tristate "Freescale MPL3115A2 pressure sensor driver"
@@ -64,8 +64,8 @@ config MPL3115 Say yes here to build support for the Freescale MPL3115A2 pressure sensor / altimeter. - To compile this driver as a module, choose M here: the module - will be called mpl3115. + To compile this driver as a module, choose M here: the module + will be called mpl3115. config MS5611 tristate "Measurement Specialties MS5611 pressure sensor driver"
@@ -97,7 +97,7 @@ config MS5611_SPI config MS5637 tristate "Measurement Specialties MS5637 pressure & temperature sensor" depends on I2C - select IIO_MS_SENSORS_I2C + select IIO_MS_SENSORS_I2C help If you say yes here you get support for the Measurement Specialties MS5637 pressure and temperature sensor.
@@ -143,7 +143,7 @@ config T5403 Say yes here to build support for the EPCOS T5403 pressure sensor connected via I2C. - To compile this driver as a module, choose M here: the module - will be called t5403. + To compile this driver as a module, choose M here: the module + will be called t5403. endmenu
Signature · 1 line
2.6.4
Jonathan Cameron
maintainerQuoted 5 lines · Jonathan Cameron
Clearly a high degree of cut and paste has gone on in this file, propogating a particularly random combination of tabs and spaces. This patch at least should make it all consistent going forward.
Signed-off-by Jonathan Cameron <[email protected]>
Ooops, I replied to just myself on Saturday that I'd applied this.
Anyhow, applied ;)
Quoted 88 lines
--- drivers/iio/pressure/Kconfig | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-)drivers/iio/pressure/Kconfig +15
-15@@ -10,11 +10,11 @@ config BMP280 depends on I2C select REGMAP_I2C help - Say yes here to build support for Bosch Sensortec BMP280 - pressure and temperature sensor. + Say yes here to build support for Bosch Sensortec BMP280 + pressure and temperature sensor. - To compile this driver as a module, choose M here: the module - will be called bmp280. + To compile this driver as a module, choose M here: the module + will be called bmp280. config HID_SENSOR_PRESS depends on HID_SENSOR_HUB@@ -27,8 +27,8 @@ config HID_SENSOR_PRESS Say yes here to build support for the HID SENSOR Pressure driver - To compile this driver as a module, choose M here: the module - will be called hid-sensor-press. + To compile this driver as a module, choose M here: the module + will be called hid-sensor-press. config MPL115 tristate@@ -41,8 +41,8 @@ config MPL115_I2C Say yes here to build support for the Freescale MPL115A2 pressure sensor connected via I2C. - To compile this driver as a module, choose M here: the module - will be called mpl115_i2c. + To compile this driver as a module, choose M here: the module + will be called mpl115_i2c. config MPL115_SPI tristate "Freescale MPL115A1 pressure sensor driver"@@ -52,8 +52,8 @@ config MPL115_SPI Say yes here to build support for the Freescale MPL115A1 pressure sensor connected via SPI. - To compile this driver as a module, choose M here: the module - will be called mpl115_spi. + To compile this driver as a module, choose M here: the module + will be called mpl115_spi. config MPL3115 tristate "Freescale MPL3115A2 pressure sensor driver"@@ -64,8 +64,8 @@ config MPL3115 Say yes here to build support for the Freescale MPL3115A2 pressure sensor / altimeter. - To compile this driver as a module, choose M here: the module - will be called mpl3115. + To compile this driver as a module, choose M here: the module + will be called mpl3115. config MS5611 tristate "Measurement Specialties MS5611 pressure sensor driver"@@ -97,7 +97,7 @@ config MS5611_SPI config MS5637 tristate "Measurement Specialties MS5637 pressure & temperature sensor" depends on I2C - select IIO_MS_SENSORS_I2C + select IIO_MS_SENSORS_I2C help If you say yes here you get support for the Measurement Specialties MS5637 pressure and temperature sensor.@@ -143,7 +143,7 @@ config T5403 Say yes here to build support for the EPCOS T5403 pressure sensor connected via I2C. - To compile this driver as a module, choose M here: the module - will be called t5403. + To compile this driver as a module, choose M here: the module + will be called t5403. endmenu