regulator: core: Rely on regulator_dev_release to free constraints

PATCH In review Charles Keepax 2 participants 2 messages Jan 26, 2016 – Jan 27, 2016 Voltage and current regulator framework

lore

Share & tools

lore

Charles Keepax

author

2016-01-26 16:39 UTC #0 lore raw

PATCH v2 1/1 regulator: core: Rely on regulator_dev_release to free constraints

As we now free the constraints in regulator_dev_release we will still call free on the constraints pointer even if we went down an error path in regulator_register, because it is only allocated after the device_register. As such we no longer need to free rdev->constraints on the error paths, so this patch removes said frees.

Fixes 29f5f4860a8e ("regulator: core: Move more deallocation into class unregister")

Signed-off-by Charles Keepax <[email protected]>

---

Changes since v1:
- Remove the frees from the error path rather than always clearing the pointer after freeing

Thanks,
Charles

 drivers/regulator/core.c | 29 ++++++++++++-----------------
 1 file changed, 12 insertions(+), 17 deletions(-)

drivers/regulator/core.c +12 ~~-17~~

index 744c988..4405be1 100644
@@ -1057,18 +1057,18 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 
 	ret = machine_constraints_voltage(rdev, rdev->constraints);
 	if (ret != 0)
-		goto out;
+		return ret;
 
 	ret = machine_constraints_current(rdev, rdev->constraints);
 	if (ret != 0)
-		goto out;
+		return ret;
 
 	if (rdev->constraints->ilim_uA && ops->set_input_current_limit) {
 		ret = ops->set_input_current_limit(rdev,
 						   rdev->constraints->ilim_uA);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set input limit\n");
-			goto out;
+			return ret;
 		}
 	}

@@ -1077,21 +1077,20 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		ret = suspend_prepare(rdev, rdev->constraints->initial_state);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set suspend state\n");
-			goto out;
+			return ret;
 		}
 	}
 
 	if (rdev->constraints->initial_mode) {
 		if (!ops->set_mode) {
 			rdev_err(rdev, "no set_mode operation\n");
-			ret = -EINVAL;
-			goto out;
+			return -EINVAL;
 		}
 
 		ret = ops->set_mode(rdev, rdev->constraints->initial_mode);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set initial mode: %d\n", ret);
-			goto out;
+			return ret;
 		}
 	}

@@ -1102,7 +1101,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		ret = _regulator_do_enable(rdev);
 		if (ret < 0 && ret != -EINVAL) {
 			rdev_err(rdev, "failed to enable\n");
-			goto out;
+			return ret;
 		}
 	}

@@ -1111,7 +1110,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		ret = ops->set_ramp_delay(rdev, rdev->constraints->ramp_delay);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set ramp_delay\n");
-			goto out;
+			return ret;
 		}
 	}

@@ -1119,7 +1118,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		ret = ops->set_pull_down(rdev);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set pull down\n");
-			goto out;
+			return ret;
 		}
 	}

@@ -1127,7 +1126,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		ret = ops->set_soft_start(rdev);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set soft start\n");
-			goto out;
+			return ret;
 		}
 	}

@@ -1136,16 +1135,12 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		ret = ops->set_over_current_protection(rdev);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set over current protection\n");
-			goto out;
+			return ret;
 		}
 	}
 
 	print_constraints(rdev);
 	return 0;
-out:
-	kfree(rdev->constraints);
-	rdev->constraints = NULL;
-	return ret;
 }
 
 /**

@@ -3979,7 +3974,7 @@ unset_supplies:
 
 scrub:
 	regulator_ena_gpio_free(rdev);
-	kfree(rdev->constraints);
+
 wash:
 	device_unregister(&rdev->dev);
 	/* device core frees rdev */

Signature · 1 line

2.1.4

Mark Brown

maintainer

2016-01-27 18:38 UTC #1 lore raw

Applied "regulator: core: Rely on regulator_dev_release to free constraints" to the regulator tree

The patch

regulator: core: Rely on regulator_dev_release to free constraints

has been applied to the regulator tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 6333ef46bbe514a8ece6c432aab6bcf8637b2d7c Mon Sep 17 00:00:00 2001

From: Charles Keepax <[email protected]>
Date: Tue, 26 Jan 2016 16:38:59 +0000
Subject: [PATCH] regulator: core: Rely on regulator_dev_release to free
constraints

Fixes 29f5f4860a8e ("regulator: core: Move more deallocation into class unregister")

Signed-off-by Charles Keepax <[email protected]>

Signed-off-by Mark Brown <[email protected]>

---
 drivers/regulator/core.c | 29 ++++++++++++-----------------
 1 file changed, 12 insertions(+), 17 deletions(-)

drivers/regulator/core.c +12 ~~-17~~

index 744c9889f88d..4405be13eb0e 100644
@@ -1057,18 +1057,18 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 
 	ret = machine_constraints_voltage(rdev, rdev->constraints);
 	if (ret != 0)
-		goto out;
+		return ret;
 
 	ret = machine_constraints_current(rdev, rdev->constraints);
 	if (ret != 0)
-		goto out;
+		return ret;
 
 	if (rdev->constraints->ilim_uA && ops->set_input_current_limit) {
 		ret = ops->set_input_current_limit(rdev,
 						   rdev->constraints->ilim_uA);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set input limit\n");
-			goto out;
+			return ret;
 		}
 	}

@@ -1077,21 +1077,20 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		ret = suspend_prepare(rdev, rdev->constraints->initial_state);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set suspend state\n");
-			goto out;
+			return ret;
 		}
 	}
 
 	if (rdev->constraints->initial_mode) {
 		if (!ops->set_mode) {
 			rdev_err(rdev, "no set_mode operation\n");
-			ret = -EINVAL;
-			goto out;
+			return -EINVAL;
 		}
 
 		ret = ops->set_mode(rdev, rdev->constraints->initial_mode);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set initial mode: %d\n", ret);
-			goto out;
+			return ret;
 		}
 	}

@@ -1102,7 +1101,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		ret = _regulator_do_enable(rdev);
 		if (ret < 0 && ret != -EINVAL) {
 			rdev_err(rdev, "failed to enable\n");
-			goto out;
+			return ret;
 		}
 	}

@@ -1111,7 +1110,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		ret = ops->set_ramp_delay(rdev, rdev->constraints->ramp_delay);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set ramp_delay\n");
-			goto out;
+			return ret;
 		}
 	}

@@ -1119,7 +1118,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		ret = ops->set_pull_down(rdev);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set pull down\n");
-			goto out;
+			return ret;
 		}
 	}

@@ -1127,7 +1126,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		ret = ops->set_soft_start(rdev);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set soft start\n");
-			goto out;
+			return ret;
 		}
 	}

@@ -1136,16 +1135,12 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		ret = ops->set_over_current_protection(rdev);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set over current protection\n");
-			goto out;
+			return ret;
 		}
 	}
 
 	print_constraints(rdev);
 	return 0;
-out:
-	kfree(rdev->constraints);
-	rdev->constraints = NULL;
-	return ret;
 }
 
 /**

@@ -3979,7 +3974,7 @@ unset_supplies:
 
 scrub:
 	regulator_ena_gpio_free(rdev);
-	kfree(rdev->constraints);
+
 wash:
 	device_unregister(&rdev->dev);
 	/* device core frees rdev */

Signature · 1 line

2.7.0.rc3