Skip to contentSkip to conversation

USB: serial: Fix coccinelle warnings

PATCH Superseded Mathieu OTHACEHE 3 participants 20 messages Jan 30, 2016 – Feb 28, 2016

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover USB: serial: Fix coccinelle warnings

This series of patches fixes all coccinelle warnings in USB serial subsystem

Mathieu OTHACEHE (14):
USB: serial: safe_serial: fix assignment of bool to 0/1
USB: serial: safe_serial: fix assignment of bool to non 0/1 constant
USB: serial: quatech2: remove comparison to bool
USB: serial: iuu_phoenix: remove comparison of bool
USB: serial: mos7840: remove comparison to bool
USB: serial: garmin_gps: move constants to right
USB: serial: ftdi_sio: move constants to right
USB: serial: keyspan: remove unused semicolon
USB: serial: cyberjack: remove unneeded variable
USB: serial: garmin_gps: remove unneeded variable
USB: serial: mos7840: move constants to right
USB: serial: ch341: move constants to right
USB: serial: f81232: move constants to right
USB: serial: kl5kusb105: remove unneeded semicolons

 drivers/usb/serial/ch341.c       |  2 +-
 drivers/usb/serial/cyberjack.c   |  3 +--
 drivers/usb/serial/f81232.c      |  2 +-
 drivers/usb/serial/ftdi_sio.c    | 16 ++++++-------
 drivers/usb/serial/ftdi_sio.h    |  8 +++----
 drivers/usb/serial/garmin_gps.c  | 51 ++++++++++++++++++++--------------------
 drivers/usb/serial/iuu_phoenix.c |  4 ++--
 drivers/usb/serial/keyspan.c     |  2 +-
 drivers/usb/serial/kl5kusb105.c  |  3 ---
 drivers/usb/serial/mos7840.c     |  8 +++----
 drivers/usb/serial/quatech2.c    |  2 +-
 drivers/usb/serial/safe_serial.c | 11 +++------
 12 files changed, 51 insertions(+), 61 deletions(-)
Signature · 1 line
2.6.4
#1 lore raw

PATCH 1/14 USB: serial: safe_serial: fix assignment of bool to 0/1

This patch fixes the following coccinelle warnings:

drivers/usb/serial/safe_serial.c:84:12-16: WARNING: Assignment of bool to 0/1 drivers/usb/serial/safe_serial.c:281:2-8: WARNING: Assignment of bool to 0/1

---
 drivers/usb/serial/safe_serial.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/usb/serial/safe_serial.c +2 -2
index b2dff0f..5662df6 100644
@@ -81,7 +81,7 @@
 #define CONFIG_USB_SERIAL_SAFE_PADDED 0
 #endif
 
-static bool safe = 1;
+static bool safe = true;
 static bool padded = CONFIG_USB_SERIAL_SAFE_PADDED;
 
 #define DRIVER_AUTHOR "[email protected], [email protected], Johan Hovold <[email protected]>"
@@ -278,7 +278,7 @@ static int safe_startup(struct usb_serial *serial)
 	case LINEO_SAFESERIAL_CRC:
 		break;
 	case LINEO_SAFESERIAL_CRC_PADDED:
-		padded = 1;
+		padded = true;
 		break;
 	default:
 		return -EINVAL;
Signature · 1 line
2.6.4
#2 lore raw

PATCH 2/14 USB: serial: safe_serial: fix assignment of bool to non 0/1 constant

In reply to Mathieu OTHACEHE

This patch fixes the following coccinelle error:

drivers/usb/serial/safe_serial.c:85:12-18: ERROR: Assignment of bool to non-0/1 constant

---
 drivers/usb/serial/safe_serial.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)
drivers/usb/serial/safe_serial.c +1 -6
index 5662df6..93c6c9b 100644
@@ -76,13 +76,8 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-
-#ifndef CONFIG_USB_SERIAL_SAFE_PADDED
-#define CONFIG_USB_SERIAL_SAFE_PADDED 0
-#endif
-
 static bool safe = true;
-static bool padded = CONFIG_USB_SERIAL_SAFE_PADDED;
+static bool padded = IS_ENABLED(CONFIG_USB_SERIAL_SAFE_PADDED);
 
 #define DRIVER_AUTHOR "[email protected], [email protected], Johan Hovold <[email protected]>"
 #define DRIVER_DESC "USB Safe Encapsulated Serial"
Signature · 1 line
2.6.4
#3 lore raw

PATCH 3/14 USB: serial: quatech2: remove comparison to bool

In reply to Mathieu OTHACEHE

This patch fixes the following coccinelle warning:

drivers/usb/serial/quatech2.c:976:5-26: WARNING: Comparison to bool

---
 drivers/usb/serial/quatech2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/serial/quatech2.c +1 -1
index 504f5bf..2df8ad5 100644
@@ -973,7 +973,7 @@ static int qt2_write(struct tty_struct *tty,
 
 	data = write_urb->transfer_buffer;
 	spin_lock_irqsave(&port_priv->urb_lock, flags);
-	if (port_priv->urb_in_use == true) {
+	if (port_priv->urb_in_use) {
 		dev_err(&port->dev, "qt2_write - urb is in use\n");
 		goto write_out;
 	}
Signature · 1 line
2.6.4
#4 lore raw

PATCH 4/14 USB: serial: iuu_phoenix: remove comparison of bool

In reply to Mathieu OTHACEHE

This patch fixes the following coccinelle warning:

drivers/usb/serial/iuu_phoenix.c:383:5-9: WARNING: Comparison of bool to 0/1 drivers/usb/serial/iuu_phoenix.c:363:5-9: WARNING: Comparison of bool to 0/1

---
 drivers/usb/serial/iuu_phoenix.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/usb/serial/iuu_phoenix.c +2 -2
index 5ad4a0f..344b4ee 100644
@@ -360,7 +360,7 @@ static void iuu_led_activity_on(struct urb *urb)
 	int result;
 	char *buf_ptr = port->write_urb->transfer_buffer;
 	*buf_ptr++ = IUU_SET_LED;
-	if (xmas == 1) {
+	if (xmas) {
 		get_random_bytes(buf_ptr, 6);
 		*(buf_ptr+7) = 1;
 	} else {
@@ -380,7 +380,7 @@ static void iuu_led_activity_off(struct urb *urb)
 	struct usb_serial_port *port = urb->context;
 	int result;
 	char *buf_ptr = port->write_urb->transfer_buffer;
-	if (xmas == 1) {
+	if (xmas) {
 		iuu_rxcmd(urb);
 		return;
 	} else {
Signature · 1 line
2.6.4
#5 lore raw

PATCH 5/14 USB: serial: mos7840: remove comparison to bool

In reply to Mathieu OTHACEHE

This patch fixes the following coccinelle warning:

drivers/usb/serial/mos7840.c:1845:5-32: WARNING: Comparison to bool drivers/usb/serial/mos7840.c:1909:5-32: WARNING: Comparison to bool

---
 drivers/usb/serial/mos7840.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/usb/serial/mos7840.c +2 -2
index 2c69bfc..8ddc313 100644
@@ -1842,7 +1842,7 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 	Data = 0x0c;
 	mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
 
-	if (mos7840_port->read_urb_busy == false) {
+	if (!mos7840_port->read_urb_busy) {
 		mos7840_port->read_urb_busy = true;
 		status = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
 		if (status) {
@@ -1906,7 +1906,7 @@ static void mos7840_set_termios(struct tty_struct *tty,
 		return;
 	}
 
-	if (mos7840_port->read_urb_busy == false) {
+	if (!mos7840_port->read_urb_busy) {
 		mos7840_port->read_urb_busy = true;
 		status = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
 		if (status) {
Signature · 1 line
2.6.4
#6 lore raw

PATCH 6/14 USB: serial: garmin_gps: move constants to right

In reply to Mathieu OTHACEHE

This patch fixes the following coccinelle warning:

drivers/usb/serial/garmin_gps.c:1195:3-4: Move constant to right. drivers/usb/serial/garmin_gps.c:1206:6-7: Move constant to right. drivers/usb/serial/garmin_gps.c:1252:5-6: Move constant to right. drivers/usb/serial/garmin_gps.c:1257:6-7: Move constant to right. drivers/usb/serial/garmin_gps.c:1279:7-8: Move constant to right. drivers/usb/serial/garmin_gps.c:1359:5-6: Move constant to right. drivers/usb/serial/garmin_gps.c:1081:9-31: Move constant to right. drivers/usb/serial/garmin_gps.c:1028:5-24: Move constant to right. drivers/usb/serial/garmin_gps.c:973:6-25: Move constant to right. drivers/usb/serial/garmin_gps.c:426:6-10: Move constant to right. drivers/usb/serial/garmin_gps.c:428:13-17: Move constant to right. drivers/usb/serial/garmin_gps.c:428:28-32: Move constant to right. drivers/usb/serial/garmin_gps.c:531:6-10: Move constant to right. drivers/usb/serial/garmin_gps.c:639:5-24: Move constant to right. drivers/usb/serial/garmin_gps.c:691:9-13: Move constant to right. drivers/usb/serial/garmin_gps.c:353:2-6: Move constant to right. drivers/usb/serial/garmin_gps.c:369:10-14: Move constant to right. drivers/usb/serial/garmin_gps.c:240:5-6: Move constant to right. drivers/usb/serial/garmin_gps.c:242:5-6: Move constant to right.

---
 drivers/usb/serial/garmin_gps.c | 48 ++++++++++++++++++++---------------------
 1 file changed, 24 insertions(+), 24 deletions(-)
drivers/usb/serial/garmin_gps.c +24 -24
index db591d1..c0bbe44 100644
@@ -237,10 +237,10 @@ static inline int getDataLength(const __u8 *usbPacket)
  */
 static inline int isAbortTrfCmnd(const unsigned char *buf)
 {
-	if (0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ,
-					sizeof(GARMIN_STOP_TRANSFER_REQ)) ||
-	    0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2,
-					sizeof(GARMIN_STOP_TRANSFER_REQ_V2)))
+	if (memcmp(buf, GARMIN_STOP_TRANSFER_REQ,
+			sizeof(GARMIN_STOP_TRANSFER_REQ)) == 0 ||
+	    memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2,
+			sizeof(GARMIN_STOP_TRANSFER_REQ_V2)) == 0)
 		return 1;
 	else
 		return 0;
@@ -350,7 +350,7 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id)
 	unsigned  l = 0;
 
 	dev_dbg(&garmin_data_p->port->dev, "%s - pkt-id: 0x%X.\n", __func__,
-		0xFF & pkt_id);
+			pkt_id & 0xFF);
 
 	*ptr++ = DLE;
 	*ptr++ = ACK;
@@ -366,7 +366,7 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id)
 		*ptr++ = DLE;
 
 	*ptr++ = 0;
-	*ptr++ = 0xFF & (-cksum);
+	*ptr++ = (-cksum) & 0xFF;
 	*ptr++ = DLE;
 	*ptr++ = ETX;
 
@@ -423,9 +423,9 @@ static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count)
 		n++;
 	}
 
-	if ((0xff & (cksum + *recpkt)) != 0) {
+	if (((cksum + *recpkt) & 0xff) != 0) {
 		dev_dbg(dev, "%s - invalid checksum, expected %02x, got %02x\n",
-			__func__, 0xff & -cksum, 0xff & *recpkt);
+			__func__, -cksum & 0xff, *recpkt & 0xff);
 		return -EINVPKT;
 	}
 
@@ -528,7 +528,7 @@ static int gsp_receive(struct garmin_data *garmin_data_p,
 					dev_dbg(dev, "NAK packet complete.\n");
 				} else {
 					dev_dbg(dev, "packet complete - id=0x%X.\n",
-						0xFF & data);
+							data & 0xFF);
 					gsp_rec_packet(garmin_data_p, size);
 				}
 
@@ -636,7 +636,7 @@ static int gsp_send(struct garmin_data *garmin_data_p,
 
 	garmin_data_p->outsize = 0;
 
-	if (GARMIN_LAYERID_APPL != getLayerId(garmin_data_p->outbuffer)) {
+	if (getLayerId(garmin_data_p->outbuffer) != GARMIN_LAYERID_APPL) {
 		dev_dbg(dev, "not an application packet (%d)\n",
 				getLayerId(garmin_data_p->outbuffer));
 		return -1;
@@ -688,7 +688,7 @@ static int gsp_send(struct garmin_data *garmin_data_p,
 			*dst++ = DLE;
 	}
 
-	cksum = 0xFF & -cksum;
+	cksum = -cksum & 0xFF;
 	*dst++ = cksum;
 	if (cksum == DLE)
 		*dst++ = DLE;
@@ -970,7 +970,7 @@ static void garmin_write_bulk_callback(struct urb *urb)
 		struct garmin_data *garmin_data_p =
 					usb_get_serial_port_data(port);
 
-		if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer)) {
+		if (getLayerId(urb->transfer_buffer) == GARMIN_LAYERID_APPL) {
 
 			if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
 				gsp_send_ack(garmin_data_p,
@@ -1025,7 +1025,7 @@ static int garmin_write_bulk(struct usb_serial_port *port,
 				dismiss_ack ? NULL : port);
 	urb->transfer_flags |= URB_ZERO_PACKET;
 
-	if (GARMIN_LAYERID_APPL == getLayerId(buffer)) {
+	if (getLayerId(buffer) == GARMIN_LAYERID_APPL) {
 
 		spin_lock_irqsave(&garmin_data_p->lock, flags);
 		garmin_data_p->flags |= APP_REQ_SEEN;
@@ -1077,9 +1077,9 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port,
 		pktsiz = getDataLength(garmin_data_p->privpkt);
 		pktid  = getPacketId(garmin_data_p->privpkt);
 
-		if (count == (GARMIN_PKTHDR_LENGTH+pktsiz)
-		    && GARMIN_LAYERID_PRIVATE ==
-				getLayerId(garmin_data_p->privpkt)) {
+		if ((GARMIN_PKTHDR_LENGTH+pktsiz) == count &&
+			getLayerId(garmin_data_p->privpkt) ==
+				GARMIN_LAYERID_PRIVATE) {
 
 			dev_dbg(dev, "%s - processing private request %d\n",
 				__func__, pktid);
@@ -1192,7 +1192,7 @@ static void garmin_read_bulk_callback(struct urb *urb)
 	garmin_read_process(garmin_data_p, data, urb->actual_length, 1);
 
 	if (urb->actual_length == 0 &&
-			0 != (garmin_data_p->flags & FLAGS_BULK_IN_RESTART)) {
+			(garmin_data_p->flags & FLAGS_BULK_IN_RESTART) != 0) {
 		spin_lock_irqsave(&garmin_data_p->lock, flags);
 		garmin_data_p->flags &= ~FLAGS_BULK_IN_RESTART;
 		spin_unlock_irqrestore(&garmin_data_p->lock, flags);
@@ -1203,7 +1203,7 @@ static void garmin_read_bulk_callback(struct urb *urb)
 				__func__, retval);
 	} else if (urb->actual_length > 0) {
 		/* Continue trying to read until nothing more is received  */
-		if (0 == (garmin_data_p->flags & FLAGS_THROTTLED)) {
+		if ((garmin_data_p->flags & FLAGS_THROTTLED) == 0) {
 			retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 			if (retval)
 				dev_err(&port->dev,
@@ -1249,12 +1249,12 @@ static void garmin_read_int_callback(struct urb *urb)
 			      urb->transfer_buffer);
 
 	if (urb->actual_length == sizeof(GARMIN_BULK_IN_AVAIL_REPLY) &&
-	    0 == memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY,
-				sizeof(GARMIN_BULK_IN_AVAIL_REPLY))) {
+		memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY,
+				sizeof(GARMIN_BULK_IN_AVAIL_REPLY)) == 0) {
 
 		dev_dbg(&port->dev, "%s - bulk data available.\n", __func__);
 
-		if (0 == (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
+		if ((garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE) == 0) {
 
 			/* bulk data available */
 			retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
@@ -1276,8 +1276,8 @@ static void garmin_read_int_callback(struct urb *urb)
 		}
 
 	} else if (urb->actual_length == (4+sizeof(GARMIN_START_SESSION_REPLY))
-			 && 0 == memcmp(data, GARMIN_START_SESSION_REPLY,
-					sizeof(GARMIN_START_SESSION_REPLY))) {
+			 && memcmp(data, GARMIN_START_SESSION_REPLY,
+				 sizeof(GARMIN_START_SESSION_REPLY)) == 0) {
 
 		spin_lock_irqsave(&garmin_data_p->lock, flags);
 		garmin_data_p->flags |= FLAGS_SESSION_REPLY1_SEEN;
@@ -1356,7 +1356,7 @@ static void garmin_unthrottle(struct tty_struct *tty)
 	if (garmin_data_p->mode == MODE_NATIVE)
 		garmin_flush_queue(garmin_data_p);
 
-	if (0 != (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
+	if ((garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE) != 0) {
 		status = usb_submit_urb(port->read_urb, GFP_KERNEL);
 		if (status)
 			dev_err(&port->dev,
Signature · 1 line
2.6.4
#7 lore raw

PATCH 7/14 USB: serial: ftdi_sio: move constants to right

In reply to Mathieu OTHACEHE

This patch fixes the following coccinelle warnings:

drivers/usb/serial/ftdi_sio.h:242:31-32: Move constant to right. drivers/usb/serial/ftdi_sio.h:243:31-32: Move constant to right. drivers/usb/serial/ftdi_sio.h:245:31-32: Move constant to right. drivers/usb/serial/ftdi_sio.h:246:30-31: Move constant to right. drivers/usb/serial/ftdi_sio.c:2327:13-32: Move constant to right. drivers/usb/serial/ftdi_sio.c:2356:22-42: Move constant to right. drivers/usb/serial/ftdi_sio.c:1322:9-25: Move constant to right. drivers/usb/serial/ftdi_sio.c:1323:9-33: Move constant to right. drivers/usb/serial/ftdi_sio.c:1324:9-30: Move constant to right. drivers/usb/serial/ftdi_sio.c:1325:9-30: Move constant to right. drivers/usb/serial/ftdi_sio.c:1326:9-32: Move constant to right.

---
 drivers/usb/serial/ftdi_sio.c | 16 ++++++++--------
 drivers/usb/serial/ftdi_sio.h |  8 ++++----
 2 files changed, 12 insertions(+), 12 deletions(-)
drivers/usb/serial/ftdi_sio.c +8 -8
index 8c660ae..07b0040 100644
@@ -1320,11 +1320,11 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
 		if (baud <= 3000000) {
 			__u16 product_id = le16_to_cpu(
 				port->serial->dev->descriptor.idProduct);
-			if (((FTDI_NDI_HUC_PID == product_id) ||
-			     (FTDI_NDI_SPECTRA_SCU_PID == product_id) ||
-			     (FTDI_NDI_FUTURE_2_PID == product_id) ||
-			     (FTDI_NDI_FUTURE_3_PID == product_id) ||
-			     (FTDI_NDI_AURORA_SCU_PID == product_id)) &&
+			if (((product_id == FTDI_NDI_HUC_PID)		||
+			     (product_id == FTDI_NDI_SPECTRA_SCU_PID)	||
+			     (product_id == FTDI_NDI_FUTURE_2_PID)	||
+			     (product_id == FTDI_NDI_FUTURE_3_PID)	||
+			     (product_id == FTDI_NDI_AURORA_SCU_PID))	&&
 			    (baud == 19200)) {
 				baud = 1200000;
 			}
@@ -2325,7 +2325,7 @@ no_c_cflag_changes:
 				    usb_sndctrlpipe(dev, 0),
 				    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
 				    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
-				    0 , (FTDI_SIO_RTS_CTS_HS | priv->interface),
+				    0, (priv->interface | FTDI_SIO_RTS_CTS_HS),
 				    NULL, 0, WDR_TIMEOUT) < 0) {
 			dev_err(ddev, "urb failed to set to rts/cts flow control\n");
 		}
@@ -2354,8 +2354,8 @@ no_c_cflag_changes:
 					    usb_sndctrlpipe(dev, 0),
 					    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
 					    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
-					    urb_value , (FTDI_SIO_XON_XOFF_HS
-							 | priv->interface),
+					    urb_value, (priv->interface |
+						    FTDI_SIO_XON_XOFF_HS),
 					    NULL, 0, WDR_TIMEOUT) < 0) {
 				dev_err(&port->dev, "urb failed to set to "
 					"xon/xoff flow control\n");
drivers/usb/serial/ftdi_sio.h +4 -4
index ed58c6f..bbcc13df 100644
@@ -239,11 +239,11 @@ enum ftdi_sio_baudrate {
  */
 
 #define FTDI_SIO_SET_DTR_MASK 0x1
-#define FTDI_SIO_SET_DTR_HIGH (1 | (FTDI_SIO_SET_DTR_MASK  << 8))
-#define FTDI_SIO_SET_DTR_LOW  (0 | (FTDI_SIO_SET_DTR_MASK  << 8))
+#define FTDI_SIO_SET_DTR_HIGH ((FTDI_SIO_SET_DTR_MASK  << 8) | 1)
+#define FTDI_SIO_SET_DTR_LOW  ((FTDI_SIO_SET_DTR_MASK  << 8) | 0)
 #define FTDI_SIO_SET_RTS_MASK 0x2
-#define FTDI_SIO_SET_RTS_HIGH (2 | (FTDI_SIO_SET_RTS_MASK << 8))
-#define FTDI_SIO_SET_RTS_LOW (0 | (FTDI_SIO_SET_RTS_MASK << 8))
+#define FTDI_SIO_SET_RTS_HIGH ((FTDI_SIO_SET_RTS_MASK << 8) | 2)
+#define FTDI_SIO_SET_RTS_LOW  ((FTDI_SIO_SET_RTS_MASK << 8) | 0)
 
 /*
  * ControlValue
Signature · 1 line
2.6.4
#8 lore raw

PATCH 8/14 USB: serial: keyspan: remove unused semicolon

In reply to Mathieu OTHACEHE

This patch fixes the following coccinelle warning:

drivers/usb/serial/keyspan.c:1966:49-50: Unneeded semicolon

---
 drivers/usb/serial/keyspan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/serial/keyspan.c +1 -1
index e07b15e..b6bd8e4 100644
@@ -1963,7 +1963,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
 	if (d_details->product_id == keyspan_usa49wg_product_id) {
 		dr = (void *)(s_priv->ctrl_buf);
 		dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT;
-		dr->bRequest = 0xB0;	/* 49wg control message */;
+		dr->bRequest = 0xB0;	/* 49wg control message */
 		dr->wValue = 0;
 		dr->wIndex = 0;
 		dr->wLength = cpu_to_le16(sizeof(msg));
Signature · 1 line
2.6.4
#9 lore raw

PATCH 9/14 USB: serial: cyberjack: remove unneeded variable

In reply to Mathieu OTHACEHE

This patch fixes the following coccinelle warning:

drivers/usb/serial/cyberjack.c:143:5-11: Unneeded variable:
"result". Return "0" on line 155

---
 drivers/usb/serial/cyberjack.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/usb/serial/cyberjack.c +1 -2
index 2916dea..5f17a3b 100644
@@ -140,7 +140,6 @@ static int  cyberjack_open(struct tty_struct *tty,
 {
 	struct cyberjack_private *priv;
 	unsigned long flags;
-	int result = 0;
 
 	dev_dbg(&port->dev, "%s - usb_clear_halt\n", __func__);
 	usb_clear_halt(port->serial->dev, port->write_urb->pipe);
@@ -152,7 +151,7 @@ static int  cyberjack_open(struct tty_struct *tty,
 	priv->wrsent = 0;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	return result;
+	return 0;
 }
 
 static void cyberjack_close(struct usb_serial_port *port)
Signature · 1 line
2.6.4
#10 lore raw

PATCH 10/14 USB: serial: garmin_gps: remove unneeded variable

In reply to Mathieu OTHACEHE

This patch fixes the following coccinelle warning:

drivers/usb/serial/garmin_gps.c:863:5-11: Unneeded variable:
"status". Return "0" on line 873

---
 drivers/usb/serial/garmin_gps.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/usb/serial/garmin_gps.c +1 -2
index c0bbe44..91a9b55 100644
@@ -860,7 +860,6 @@ static int process_resetdev_request(struct usb_serial_port *port)
 static int garmin_clear(struct garmin_data *garmin_data_p)
 {
 	unsigned long flags;
-	int status = 0;
 
 	/* flush all queued data */
 	pkt_clear(garmin_data_p);
@@ -870,7 +869,7 @@ static int garmin_clear(struct garmin_data *garmin_data_p)
 	garmin_data_p->outsize = 0;
 	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 
-	return status;
+	return 0;
 }
 
 
Signature · 1 line
2.6.4
#11 lore raw

PATCH 11/14 USB: serial: mos7840: move constants to right

In reply to Mathieu OTHACEHE

This patch fixes the following coccinelle warnings:

drivers/usb/serial/mos7840.c:2042:4-10: Move constant to right. drivers/usb/serial/mos7840.c:2062:16-22: Move constant to right.

---
 drivers/usb/serial/mos7840.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/usb/serial/mos7840.c +2 -2
index 8ddc313..982a3fb 100644
@@ -2039,7 +2039,7 @@ static int mos7810_check(struct usb_serial *serial)
 		/* Send the 1-bit test pattern out to MCS7810 test pin */
 		usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			MCS_WRREQ, MCS_WR_RTYPE,
-			(0x0300 | (((test_pattern >> i) & 0x0001) << 1)),
+			((((test_pattern >> i) & 0x0001) << 1) | 0x0300),
 			MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT);
 
 		/* Read the test pattern back */
@@ -2059,7 +2059,7 @@ static int mos7810_check(struct usb_serial *serial)
 
 	/* Restore MCR setting */
 	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCS_WRREQ,
-		MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL,
+		MCS_WR_RTYPE, mcr_data | 0x0300, MODEM_CONTROL_REGISTER, NULL,
 		0, MOS_WDR_TIMEOUT);
 
 	kfree(buf);
Signature · 1 line
2.6.4
#12 lore raw

Re: [PATCH 11/14] USB: serial: mos7840: move constants to right

Quoted 24 lines · Mathieu OTHACEHE

This patch fixes the following coccinelle warnings:

drivers/usb/serial/mos7840.c:2042:4-10: Move constant to right. drivers/usb/serial/mos7840.c:2062:16-22: Move constant to right.

---
 drivers/usb/serial/mos7840.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/usb/serial/mos7840.c +1 -1
index 8ddc313..982a3fb 100644
@@ -2039,7 +2039,7 @@ static int mos7810_check(struct usb_serial *serial)
 		/* Send the 1-bit test pattern out to MCS7810 test pin */
 		usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			MCS_WRREQ, MCS_WR_RTYPE,
-			(0x0300 | (((test_pattern >> i) & 0x0001) << 1)),
+			((((test_pattern >> i) & 0x0001) << 1) | 0x0300),
 			MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT);
 
 		/* Read the test pattern back */

drivers/usb/serial/mos7840.c static int mos7810_check(struct usb_serial *serial) · line 2065

Quoted 8 lines
drivers/usb/serial/mos7840.c +1 -1
@@ -2059,7 +2059,7 @@ static int mos7810_check(struct usb_serial *serial)
 
 	/* Restore MCR setting */
 	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCS_WRREQ,
-		MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL,
+		MCS_WR_RTYPE, mcr_data | 0x0300, MODEM_CONTROL_REGISTER, NULL,
 		0, MOS_WDR_TIMEOUT);
 
 	kfree(buf);

I feel I'm missing something here, so I have to ask the stupid question:
What could possibly be the benefit here? Is it faster? Safer? Easier to read?

Bjørn

#13 lore raw

Re: [PATCH 11/14] USB: serial: mos7840: move constants to right

Quoted 33 lines · Bjørn Mork
Quoted 31 lines · Mathieu OTHACEHE

This patch fixes the following coccinelle warnings:

drivers/usb/serial/mos7840.c:2042:4-10: Move constant to right. drivers/usb/serial/mos7840.c:2062:16-22: Move constant to right.

---
 drivers/usb/serial/mos7840.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/usb/serial/mos7840.c +2 -2
index 8ddc313..982a3fb 100644
@@ -2039,7 +2039,7 @@ static int mos7810_check(struct usb_serial *serial)
 		/* Send the 1-bit test pattern out to MCS7810 test pin */
 		usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			MCS_WRREQ, MCS_WR_RTYPE,
-			(0x0300 | (((test_pattern >> i) & 0x0001) << 1)),
+			((((test_pattern >> i) & 0x0001) << 1) | 0x0300),
 			MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT);
 
 		/* Read the test pattern back */
@@ -2059,7 +2059,7 @@ static int mos7810_check(struct usb_serial *serial)
 
 	/* Restore MCR setting */
 	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCS_WRREQ,
-		MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL,
+		MCS_WR_RTYPE, mcr_data | 0x0300, MODEM_CONTROL_REGISTER, NULL,
 		0, MOS_WDR_TIMEOUT);
 
Quoted 5 lines

drivers/usb/serial/mos7840.c static int mos7810_check(struct usb_serial *serial) · line 2065

Quoted 1 line
drivers/usb/serial/mos7840.c +0 -0
 	kfree(buf);

I feel I'm missing something here, so I have to ask the stupid question:
What could possibly be the benefit here? Is it faster? Safer? Easier to read?

I don't think it will be faster or safer, maybe easier to read. But the point is to remove the warnings produced by the file scripts/coccinelle/misc/compare_const_fl.cocci when running make coccicheck.

Quoted 4 lines

Bjørn

#14 lore raw

Re: [PATCH 11/14] USB: serial: mos7840: move constants to right

Quoted 9 lines · Mathieu OTHACEHE
Quoted 3 lines · Bjørn Mork

I feel I'm missing something here, so I have to ask the stupid question:
What could possibly be the benefit here? Is it faster? Safer? Easier to read?

I don't think it will be faster or safer, maybe easier to read. But the point is to remove the warnings produced by the file scripts/coccinelle/misc/compare_const_fl.cocci when running make coccicheck.

Making a tool happy is never going to be a valid reason for anything. If it were, then you would not be necessary...

Luckily you still are. Your task is adding some intelligence to the output of the script. That means that you should look at the output and describe how it improves the code in a way that makes me understand it. And I can be pretty slow :)

If you can't do that, then there is a high probability that the script didn't improve anything.

Bjørn

maintainer
#15 lore raw

Re: [PATCH 11/14] USB: serial: mos7840: move constants to right

Quoted 7 lines · Bjørn Mork
Quoted 6 lines · Mathieu OTHACEHE
Quoted 3 lines · Bjørn Mork

I feel I'm missing something here, so I have to ask the stupid question:
What could possibly be the benefit here? Is it faster? Safer? Easier to read?

Quoted 6 lines
Quoted 3 lines

I don't think it will be faster or safer, maybe easier to read. But the point is to remove the warnings produced by the file scripts/coccinelle/misc/compare_const_fl.cocci when running make coccicheck.

Making a tool happy is never going to be a valid reason for anything. If it were, then you would not be necessary...

Agreed.

Quoted 7 lines

Luckily you still are. Your task is adding some intelligence to the output of the script. That means that you should look at the output and describe how it improves the code in a way that makes me understand it. And I can be pretty slow :)

If you can't do that, then there is a high probability that the script didn't improve anything.

Looking through some of these (resent) chunks now, it's clear that some arguable do not even improve readability.

I'll try to go through them and only pick the ones that do.

Thanks,
Johan

#16 lore raw

PATCH 12/14 USB: serial: ch341: move constants to right

In reply to Mathieu OTHACEHE

This patch fixes the following coccinelle warning:

drivers/usb/serial/ch341.c:373:2-18: Move constant to right.

---
 drivers/usb/serial/ch341.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/serial/ch341.c +1 -1
index c73808f..f139488 100644
@@ -370,7 +370,7 @@ static void ch341_set_termios(struct tty_struct *tty,
 static void ch341_break_ctl(struct tty_struct *tty, int break_state)
 {
 	const uint16_t ch341_break_reg =
-		CH341_REG_BREAK1 | ((uint16_t) CH341_REG_BREAK2 << 8);
+			((uint16_t) CH341_REG_BREAK2 << 8) | CH341_REG_BREAK1;
 	struct usb_serial_port *port = tty->driver_data;
 	int r;
 	uint16_t reg_contents;
Signature · 1 line
2.6.4
#17 lore raw

PATCH 13/14 USB: serial: f81232: move constants to right

In reply to Mathieu OTHACEHE

This patch fixes the following coccinelle warning:

drivers/usb/serial/f81232.c:193:7-20: Move constant to right.

---
 drivers/usb/serial/f81232.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/serial/f81232.c +1 -1
index 972f5a5..589d856 100644
@@ -190,7 +190,7 @@ static int f81232_set_mctrl(struct usb_serial_port *port,
 
 	/* force enable interrupt with OUT2 */
 	mutex_lock(&priv->lock);
-	val = UART_MCR_OUT2 | priv->modem_control;
+	val = priv->modem_control | UART_MCR_OUT2;
 
 	if (clear & TIOCM_DTR)
 		val &= ~UART_MCR_DTR;
Signature · 1 line
2.6.4
#18 lore raw

PATCH 14/14 USB: serial: kl5kusb105: remove unneeded semicolons

In reply to Mathieu OTHACEHE

This patch fixes the following coccinelle warnings:

drivers/usb/serial/kl5kusb105.c:475:2-3: Unneeded semicolon drivers/usb/serial/kl5kusb105.c:530:2-3: Unneeded semicolon drivers/usb/serial/kl5kusb105.c:549:2-3: Unneeded semicolon

---
 drivers/usb/serial/kl5kusb105.c | 3 ---
 1 file changed, 3 deletions(-)
drivers/usb/serial/kl5kusb105.c +0 -3
index e020ad2..fc5d3a7 100644
@@ -472,7 +472,6 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 		/* maybe this should be simulated by sending read
 		 * disable and read enable messages?
 		 */
-		;
 #if 0
 		priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
 		mct_u232_set_modem_ctrl(serial, priv->control_state);
@@ -527,7 +526,6 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 
 		mct_u232_set_line_ctrl(serial, priv->last_lcr);
 #endif
-		;
 	}
 	/*
 	 * Set flow control: well, I do not really now how to handle DTR/RTS.
@@ -546,7 +544,6 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 			priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
 		mct_u232_set_modem_ctrl(serial, priv->control_state);
 #endif
-		;
 	}
 	memcpy(cfg, &priv->cfg, sizeof(*cfg));
 	spin_unlock_irqrestore(&priv->lock, flags);
Signature · 1 line
2.6.4
maintainer
#19 lore raw
In reply to Mathieu OTHACEHE
Quoted 18 lines · Mathieu OTHACEHE

This series of patches fixes all coccinelle warnings in USB serial subsystem

Mathieu OTHACEHE (14):
USB: serial: safe_serial: fix assignment of bool to 0/1
USB: serial: safe_serial: fix assignment of bool to non 0/1 constant
USB: serial: quatech2: remove comparison to bool
USB: serial: iuu_phoenix: remove comparison of bool
USB: serial: mos7840: remove comparison to bool
USB: serial: garmin_gps: move constants to right
USB: serial: ftdi_sio: move constants to right
USB: serial: keyspan: remove unused semicolon
USB: serial: cyberjack: remove unneeded variable
USB: serial: garmin_gps: remove unneeded variable
USB: serial: mos7840: move constants to right
USB: serial: ch341: move constants to right
USB: serial: f81232: move constants to right
USB: serial: kl5kusb105: remove unneeded semicolons

Please squash these per type (or larger class) of issue you're fixing, at least when the diffs aren't too big. No need to remove two semicolons in two patches, etc.

Thanks,
Johan