Adding NPS400 drivers
Subsystems (4)
cover Adding NPS400 drivers
From: Noam Camus <[email protected]>
General summay:
Both drivers are now apart of previous basic patch set of new platform for ARC. The rest is now can be seen at ARC srctree:
https://git.kernel.org/cgit/linux/kernel/git/vgupta/arc.git/
Now ARC is supporting DT for clockevents and the interrupt controller ARC uses irq domain handling.
Compare to last version now clocksource driver do not include clockevent registration since NPS400 can use ARC generic driver.
Compare to last version now irqchip driver sets domain as default since it is the root domain. Also mapping of IPI is done in this driver.
Last thing is that drivers can be build cleanly for i386 (still runs only for ARC)
Note: in order to build we need to merge drivers into srctree which includes new header:soc/nps/common.h
This header is part of patch set applied to ARC srctree.
Regards,
Noam Camus
Noam Camus (2):
clocksource: Add NPS400 timers driver
irqchip: add nps Internal and external irqchips
.../interrupt-controller/ezchip,nps400-ic.txt | 17 +++ .../bindings/timer/ezchip,nps400-timer.txt | 15 ++ drivers/clocksource/Kconfig | 7 + drivers/clocksource/Makefile | 1 + drivers/clocksource/timer-nps.c | 84 +++++++++++ drivers/irqchip/Kconfig | 6 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-eznps.c | 151 ++++++++++++++++++++ 8 files changed, 282 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt create mode 100644 Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt create mode 100644 drivers/clocksource/timer-nps.c create mode 100644 drivers/irqchip/irq-eznps.c
PATCH 1/2 clocksource: Add NPS400 timers driver
From: Noam Camus <[email protected]>
Add internal tick generator which is shared by all cores. Each cluster of cores view it through dedicated address. This is used for SMP system where all CPUs synced by same clock source.
--- .../bindings/timer/ezchip,nps400-timer.txt | 15 ++++ drivers/clocksource/Kconfig | 7 ++ drivers/clocksource/Makefile | 1 + drivers/clocksource/timer-nps.c | 84 ++++++++++++++++++++ 4 files changed, 107 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt create mode 100644 drivers/clocksource/timer-nps.c
Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt new file +15 -0
@@ -0,0 +1,15 @@ +NPS Network Processor + +Required properties: + +- compatible : should be "ezchip,nps400-timer" + +Clocks required for compatible = "ezchip,nps400-timer": +- clocks : Must contain a single entry describing the clock input + +Example: + +timer { + compatible = "ezchip,nps400-timer"; + clocks = <&sysclk>; +};
drivers/clocksource/Kconfig +7 -0
@@ -132,6 +132,13 @@ config CLKSRC_TI_32K This option enables support for Texas Instruments 32.768 Hz clocksource available on many OMAP-like platforms. +config CLKSRC_NPS + bool "NPS400 clocksource driver" if COMPILE_TEST + select CLKSRC_OF if OF + help + NPS400 clocksource support. + Got 64 bit counter with update rate up to 1000MHz. + config CLKSRC_STM32 bool "Clocksource for STM32 SoCs" if !ARCH_STM32 depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
drivers/clocksource/Makefile +1 -0
@@ -46,6 +46,7 @@ obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o obj-$(CONFIG_MTK_TIMER) += mtk_timer.o obj-$(CONFIG_CLKSRC_PISTACHIO) += time-pistachio.o obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o +obj-$(CONFIG_CLKSRC_NPS) += timer-nps.o obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
drivers/clocksource/timer-nps.c new file +84 -0
84 lines not on this page · raw message
Signature · 1 line
1.7.1
kbuild test robot
build botRe: [PATCH 1/2] clocksource: Add NPS400 timers driver
reproduce:
Hi Noam,
[auto build test ERROR on tip/irq/core]
[also build test ERROR on v4.5-rc2 next-20160201]
[if your patch is applied to the wrong git tree, please drop us a note to help improving the system]
url: https://github.com/0day-ci/linux/commits/Noam-Camus/clocksource-Add-NPS400-timers-driver/20160202-032620 config: i386-allmodconfig (attached as .config) reproduce: # save the attached .config to linux build tree make ARCH=i386
All errors (new ones prefixed by >>):
>> drivers/clocksource/timer-nps.c:24:28: fatal error: soc/nps/common.h: No such file or directory
compilation terminated.
vim +24 drivers/clocksource/timer-nps.c
18 #include <linux/clocksource.h>
19 #include <linux/clockchips.h>
20 #include <linux/clk.h>
21 #include <linux/of.h>
22 #include <linux/of_irq.h>
23 #include <linux/cpu.h>
> 24 #include <soc/nps/common.h>
25
26 #define NPS_MSU_TICK_LOW 0xC8
27 #define NPS_CLUSTER_OFFSET 8---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/octet-stream
Size: 52576 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-snps-arc/attachments/20160202/03f98bf3/attachment-0001.obj>
PATCH 2/2 irqchip: add nps Internal and external irqchips
In reply to Noam CamusFrom: Noam Camus <[email protected]>
Adding EZchip NPS400 support.
NPS internal interrupts are internally handled at Multi Thread Manager (MTM) that is signaled for deactivating an interrupt.
External interrupts is handled also at Global Interrupt Controller (GIC) e.g. serial and network devices.
--- .../interrupt-controller/ezchip,nps400-ic.txt | 17 +++ drivers/irqchip/Kconfig | 6 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-eznps.c | 151 ++++++++++++++++++++ 4 files changed, 175 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt create mode 100644 drivers/irqchip/irq-eznps.c
Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt new file +17 -0
@@ -0,0 +1,17 @@ +EZchip NPS Interrupt Controller + +Required properties: + +- compatible : should be "ezchip,nps400-ic" +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 1. + + +Example: + +intc: interrupt-controller { + compatible = "ezchip,nps400-ic"; + interrupt-controller; + #interrupt-cells = <1>; +};
drivers/irqchip/Kconfig +6 -0
@@ -193,3 +193,9 @@ config IRQ_MXS def_bool y if MACH_ASM9260 || ARCH_MXS select IRQ_DOMAIN select STMP_DEVICE + +config EZNPS_GIC + bool "NPS400 Global Interrupt Manager (GIM)" + select IRQ_DOMAIN + help + Support the EZchip NPS400 global interrupt controller
drivers/irqchip/Makefile +1 -0
@@ -55,3 +55,4 @@ obj-$(CONFIG_RENESAS_H8S_INTC) += irq-renesas-h8s.o obj-$(CONFIG_ARCH_SA1100) += irq-sa11x0.o obj-$(CONFIG_INGENIC_IRQ) += irq-ingenic.o obj-$(CONFIG_IMX_GPCV2) += irq-imx-gpcv2.o +obj-$(CONFIG_EZNPS_GIC) += irq-eznps.o
drivers/irqchip/irq-eznps.c new file +151 -0
151 lines not on this page · raw message
Signature · 1 line
1.7.1
kbuild test robot
build botRe: [PATCH 2/2] irqchip: add nps Internal and external irqchips
reproduce:
Hi Noam,
[auto build test ERROR on tip/irq/core]
[cannot apply to v4.5-rc2 next-20160201]
[if your patch is applied to the wrong git tree, please drop us a note to help improving the system]
url: https://github.com/0day-ci/linux/commits/Noam-Camus/clocksource-Add-NPS400-timers-driver/20160202-032620 config: i386-allmodconfig (attached as .config) reproduce: # save the attached .config to linux build tree make ARCH=i386
All errors (new ones prefixed by >>):
>> drivers/irqchip/irq-eznps.c:22:28: fatal error: soc/nps/common.h: No such file or directory
compilation terminated.
vim +22 drivers/irqchip/irq-eznps.c
16
17 #include <linux/interrupt.h>
18 #include <linux/module.h>
19 #include <linux/of.h>
20 #include <linux/irqdomain.h>
21 #include <linux/irqchip.h>
> 22 #include <soc/nps/common.h>
23
24 #undef NR_CPU_IRQS
25 #define NR_CPU_IRQS 8 /* number of interrupt lines of NPS400 CPU */---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/octet-stream
Size: 52584 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-snps-arc/attachments/20160202/c4a3dfd6/attachment-0001.obj>