Skip to contentSkip to conversation

serial: fsl-imx-uart: Fix typo in fsl,dte-mode description

PATCH Applied Fabio Estevam 2 participants 2 messages Feb 5, 2016 – Mar 3, 2016 1 message not in the archive

Subsystems (3)
Device tree bindings Arm i.MX and Layerscape TTY layer and serial drivers
lore
Share & tools
lore

Fabio Estevam

author
#0 lore raw

PATCH 1/1 serial: fsl-imx-uart: Fix typo in fsl,dte-mode description

From: Fabio Estevam <[email protected]>

We should say "The uart works in DCE mode".

Signed-off-by Fabio Estevam <[email protected]>
---
 Documentation/devicetree/bindings/serial/fsl-imx-uart.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/serial/fsl-imx-uart.txt +1 -1
index 35ae1fb..ed94c21 100644
@@ -9,7 +9,7 @@ Optional properties:
 - fsl,uart-has-rtscts : Indicate the uart has rts and cts
 - fsl,irda-mode : Indicate the uart supports irda mode
 - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
-                  is DCE mode by default.
+                  in DCE mode by default.
 
 Note: Each uart controller should have an alias correctly numbered
 in "aliases" node.
Signature · 6 lines
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): 1454701462-4859-1-git-send-email-festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

Applied
#2 lore raw
Quoted 5 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

We should say "The uart works in DCE mode".

Signed-off-by Fabio Estevam <[email protected]>

Applied, thanks.

Rob

Quoted 20 lines
---
 Documentation/devicetree/bindings/serial/fsl-imx-uart.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/serial/fsl-imx-uart.txt +1 -1
index 35ae1fb..ed94c21 100644
@@ -9,7 +9,7 @@ Optional properties:
 - fsl,uart-has-rtscts : Indicate the uart has rts and cts
 - fsl,irda-mode : Indicate the uart supports irda mode
 - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
-                  is DCE mode by default.
+                  in DCE mode by default.
 
 Note: Each uart controller should have an alias correctly numbered
 in "aliases" node.
Signature · 1 line
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html