x86: ivybridge: Add Intel FSP support
Subsystems (2)
v2 cover x86: ivybridge: Add Intel FSP support
This series adds Intel FSP support to IvyBridge processor and Panther Point chipset (aka Chief River platform), and is validated on Intel Cougar Canyon 2 board.
This only adds basic features like serial, keyboard, RTC, timer, SPI, GPIO, PCI, SATA, USB. Other features will be enabled in future patch set.
Changes in v2:
- Drop patches which were already applied
- Rebase on top of u-boot-x86/master
- Change fsp files license from Intel to GPL-2.0+
- Introduce a Kconfig option to wrap these codes
- Change include order - <asm/...> go after the normal includes
- Use PCH uclass driver and change to use dm pci config APIs
Bin Meng (5):
x86: ivybridge: Add FSP support
superio: Add SMSC SIO1007 driver
x86: fsp: Make sure HOB list is not overwritten by U-Boot
x86: ivybridge: bd82x6x: Support FSP enabled configuration
x86: Add Intel Cougar Canyon 2 board
arch/x86/Kconfig | 10 ++ arch/x86/cpu/ivybridge/Kconfig | 12 ++ arch/x86/cpu/ivybridge/Makefile | 6 +- arch/x86/cpu/ivybridge/bd82x6x.c | 4 + arch/x86/cpu/ivybridge/fsp_configs.c | 45 ++++++++ arch/x86/cpu/ivybridge/ivybridge.c | 22 ++++ arch/x86/dts/Makefile | 1 + arch/x86/dts/cougarcanyon2.dts | 104 +++++++++++++++++ .../include/asm/arch-ivybridge/fsp/fsp_configs.h | 40 +++++++ arch/x86/include/asm/arch-ivybridge/fsp/fsp_vpd.h | 12 ++ arch/x86/lib/fsp/fsp_support.c | 33 ++++++ board/intel/Kconfig | 9 ++ board/intel/cougarcanyon2/Kconfig | 25 ++++ board/intel/cougarcanyon2/MAINTAINERS | 6 + board/intel/cougarcanyon2/Makefile | 7 ++ board/intel/cougarcanyon2/cougarcanyon2.c | 58 ++++++++++ board/intel/cougarcanyon2/start.S | 9 ++ configs/cougarcanyon2_defconfig | 21 ++++ drivers/misc/Makefile | 1 + drivers/misc/smsc_sio1007.c | 126 +++++++++++++++++++++ include/configs/cougarcanyon2.h | 34 ++++++ include/smsc_sio1007.h | 115 +++++++++++++++++++ 22 files changed, 699 insertions(+), 1 deletion(-) create mode 100644 arch/x86/cpu/ivybridge/fsp_configs.c create mode 100644 arch/x86/cpu/ivybridge/ivybridge.c create mode 100644 arch/x86/dts/cougarcanyon2.dts create mode 100644 arch/x86/include/asm/arch-ivybridge/fsp/fsp_configs.h create mode 100644 arch/x86/include/asm/arch-ivybridge/fsp/fsp_vpd.h create mode 100644 board/intel/cougarcanyon2/Kconfig create mode 100644 board/intel/cougarcanyon2/MAINTAINERS create mode 100644 board/intel/cougarcanyon2/Makefile create mode 100644 board/intel/cougarcanyon2/cougarcanyon2.c create mode 100644 board/intel/cougarcanyon2/start.S create mode 100644 configs/cougarcanyon2_defconfig create mode 100644 drivers/misc/smsc_sio1007.c create mode 100644 include/configs/cougarcanyon2.h create mode 100644 include/smsc_sio1007.h
Signature · 1 line
1.8.2.1
PATCH v2 1/5 x86: ivybridge: Add FSP support
IvyBridge FSP package is built with a base address at 0xfff80000, and does not use UPD data region. This adds basic FSP support.
Tested on link (ivybridge non-FSP)
---
Changes in v2:
- Drop patches which were already applied
- Rebase on top of u-boot-x86/master
- Change fsp files license from Intel to GPL-2.0+
arch/x86/cpu/ivybridge/Kconfig | 8 ++++ arch/x86/cpu/ivybridge/Makefile | 4 ++ arch/x86/cpu/ivybridge/fsp_configs.c | 45 ++++++++++++++++++++++ arch/x86/cpu/ivybridge/ivybridge.c | 22 +++++++++++ .../include/asm/arch-ivybridge/fsp/fsp_configs.h | 40 +++++++++++++++++++ arch/x86/include/asm/arch-ivybridge/fsp/fsp_vpd.h | 12 ++++++ 6 files changed, 131 insertions(+) create mode 100644 arch/x86/cpu/ivybridge/fsp_configs.c create mode 100644 arch/x86/cpu/ivybridge/ivybridge.c create mode 100644 arch/x86/include/asm/arch-ivybridge/fsp/fsp_configs.h create mode 100644 arch/x86/include/asm/arch-ivybridge/fsp/fsp_vpd.h
arch/x86/cpu/ivybridge/Kconfig +8 -0
@@ -71,4 +71,12 @@ config ENABLE_VMX will be unable to support virtualisation, or it will run very slowly. +config FSP_ADDR + hex + default 0xfff80000 + +config FSP_USE_UPD + bool + default n + endif
arch/x86/cpu/ivybridge/Makefile +4 -0
@@ -4,6 +4,9 @@ # SPDX-License-Identifier: GPL-2.0+ # +ifdef CONFIG_HAVE_FSP +obj-y += fsp_configs.o ivybridge.o +else obj-y += bd82x6x.o obj-y += car.o obj-y += cpu.o
@@ -17,3 +20,4 @@ obj-y += northbridge.o obj-y += report_platform.o obj-y += sata.o obj-y += sdram.o +endif
arch/x86/cpu/ivybridge/fsp_configs.c new file +45 -0
45 lines not on this page · raw message
arch/x86/cpu/ivybridge/ivybridge.c new file +22 -0
@@ -0,0 +1,22 @@ +/* +* Copyright (C) 2016, Bin Meng <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#include <common.h> +#include <asm/post.h> +#include <asm/processor.h> + +int arch_cpu_init (void ) +{ +int ret; + +post_code (POST_CPU_INIT ); + + ret =x86_cpu_init_f (); +if (ret) +return ret; + +return 0 ; +}
arch/x86/include/asm/arch-ivybridge/fsp/fsp_configs.h new file +40 -0
@@ -0,0 +1,40 @@ +/* +* Copyright (C) 2016, Bin Meng <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#ifndef __FSP_CONFIGS_H__ +#define __FSP_CONFIGS_H__ + +struct platform_config { +u8 enable_ht; +u8 enable_turbo; +u8 enable_memory_down; +u8 enable_fast_boot; +}; + +/* +* Dummy structure for now as currently only SPD is verified in U-Boot. +* +* We can add the missing parameters when adding support on a board with +* memory down configuration. +*/ +struct memory_config { +u8 dummy; +}; + +struct fsp_config_data { +struct fsp_cfg_common common; +struct platform_config plat_config; +struct memory_config mem_config; +}; + +struct fspinit_rtbuf { +u32 stack_top; +u32 boot_mode; +struct platform_config *plat_config; +struct memory_config *mem_config; +}; + +#endif /* __FSP_CONFIGS_H__ */
arch/x86/include/asm/arch-ivybridge/fsp/fsp_vpd.h new file +12 -0
@@ -0,0 +1,12 @@ +/* +* Copyright (C) 2016, Bin Meng <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#ifndef __FSP_VPD_H__ +#define __FSP_VPD_H__ + +/* IvyBridge FSP does not support VPD/UPD */ + +#endif
Signature · 1 line
1.8.2.1
PATCH v2 2/5 superio: Add SMSC SIO1007 driver
In reply to Bin MengThe SMSC SIO1007 superio chipset integrates two ns16550 compatible serial ports for legacy applications, 16 GPIO pins and some other functionalities like power management.
This adds a simple driver to enable serial port and handle GPIO.
---
Changes in v2: None
drivers/misc/Makefile | 1 + drivers/misc/smsc_sio1007.c | 126 ++++++++++++++++++++++++++++++++++++++++++++ include/smsc_sio1007.h | 115 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 242 insertions(+) create mode 100644 drivers/misc/smsc_sio1007.c create mode 100644 include/smsc_sio1007.h
drivers/misc/Makefile +1 -0
@@ -32,6 +32,7 @@ ifdef CONFIG_DM_I2C obj-$(CONFIG_SANDBOX) += i2c_eeprom_emul.o endif obj-$(CONFIG_SMSC_LPC47M) += smsc_lpc47m.o +obj-$(CONFIG_SMSC_SIO1007) += smsc_sio1007.o obj-$(CONFIG_STATUS_LED) += status_led.o obj-$(CONFIG_SANDBOX) += swap_case.o obj-$(CONFIG_SANDBOX) += syscon_sandbox.o
drivers/misc/smsc_sio1007.c new file +126 -0
126 lines not on this page · raw message
include/smsc_sio1007.h new file +115 -0
115 lines not on this page · raw message
Signature · 1 line
1.8.2.1
PATCH v2 2/5 superio: Add SMSC SIO1007 driver
Quoted 9 lines · Bin Meng
The SMSC SIO1007 superio chipset integrates two ns16550 compatible serial ports for legacy applications, 16 GPIO pins and some other functionalities like power management.
This adds a simple driver to enable serial port and handle GPIO.
Signed-off-by Bin Meng <[email protected]>---
Quoted 8 lines
Changes in v2: None
drivers/misc/Makefile | 1 + drivers/misc/smsc_sio1007.c | 126 ++++++++++++++++++++++++++++++++++++++++++++ include/smsc_sio1007.h | 115 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 242 insertions(+) create mode 100644 drivers/misc/smsc_sio1007.c create mode 100644 include/smsc_sio1007.h
PATCH v2 3/5 x86: fsp: Make sure HOB list is not overwritten by U-Boot
In reply to Bin MengIntel IvyBridge FSP seems to be buggy that it does not report memory used by FSP itself as reserved in the resource descriptor HOB. The FSP specification does not describe how resource descriptor HOBs are generated by the FSP to describe what memory regions. It looks newer FSPs like Queensbay and BayTrail do not have such issue. This causes U-Boot relocation overwrites the important boot service data which is used by FSP, and the subsequent call to fsp_notify() will fail.
To resolve this, we find out the lowest memory base address allocated by FSP for the boot service data when walking through the HOB list in fsp_get_usable_lowmem_top(). Check whether the memory top address is below the FSP HOB list, and if not, use the lowest memory base address allocated by FSP as the memory top address.
Tested on link (ivybridge non-FSP)
---
Changes in v2:
- Introduce a Kconfig option to wrap these codes
arch/x86/Kconfig | 10 ++++++++++ arch/x86/lib/fsp/fsp_support.c | 33 +++++++++++++++++++++++++++++++++ 2 files changed, 43 insertions(+)
arch/x86/Kconfig +10 -0
@@ -248,6 +248,16 @@ config FSP_USE_UPD are still some FSPs that might not even have UPD. For such FSPs, override this to n in their platform Kconfig files. +config FSP_BROKEN_HOB + bool + depends on HAVE_FSP + help + Indicate some buggy FSPs that does not report memory used by FSP + itself as reserved in the resource descriptor HOB. Select this to + tell U-Boot to do some additional work to ensure U-Boot relocation + do not overwrite the important boot service data which is used by + FSP, otherwise the subsequent call to fsp_notify() will fail. + config ENABLE_MRC_CACHE bool "Enable MRC cache" depends on !EFI && !SYS_COREBOOT
arch/x86/lib/fsp/fsp_support.c +33 -0
@@ -225,6 +225,10 @@ u32 fsp_get_usable_lowmem_top(const void *hob_list)struct hob_res_desc *res_desc;phys_addr_t phys_start;u32 top; +#ifdef CONFIG_FSP_BROKEN_HOB +struct hob_mem_alloc *res_mem; +phys_addr_t mem_base =0 ; +#endif /* Get the HOB list for processing */ hdr = hob_list;
@@ -242,9 +246,38 @@ u32 fsp_get_usable_lowmem_top(const void *hob_list) top += (u32)(res_desc->len); } } + +#ifdef CONFIG_FSP_BROKEN_HOB +/* +* Find out the lowest memory base address allocated by FSP +* for the boot service data +*/ +if (hdr->type ==HOB_TYPE_MEM_ALLOC ) { + res_mem = (struct hob_mem_alloc *)hdr; +if (!mem_base) + mem_base = res_mem->mem_base; +if (res_mem->mem_base < mem_base) + mem_base = res_mem->mem_base; + } +#endif + hdr =get_next_hob (hdr); } +#ifdef CONFIG_FSP_BROKEN_HOB +/* +* Check whether the memory top address is below the FSP HOB list. +* If not, use the lowest memory base address allocated by FSP as +* the memory top address. This is to prevent U-Boot relocation +* overwrites the important boot service data which is used by FSP, +* otherwise the subsequent call to fsp_notify() will fail. +*/ +if (top > (u32 )hob_list) { +debug ("Adjust memory top address due to a buggy FSP\n" ); + top = (u32 )mem_base; + } +#endif +return top; }
Signature · 1 line
1.8.2.1
PATCH v2 4/5 x86: ivybridge: bd82x6x: Support FSP enabled configuration
In reply to Bin MengWrap initialization codes with #ifndef CONFIG_HAVE_FSP #endif, and enable the build for both FSP and non-FSP configurations.
---
Changes in v2: None
arch/x86/cpu/ivybridge/Makefile | 2 +- arch/x86/cpu/ivybridge/bd82x6x.c | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-)
arch/x86/cpu/ivybridge/Makefile +1 -1
@@ -7,7 +7,6 @@ ifdef CONFIG_HAVE_FSP obj-y += fsp_configs.o ivybridge.o else -obj-y += bd82x6x.o obj-y += car.o obj-y += cpu.o obj-y += early_me.o
@@ -21,3 +20,4 @@ obj-y += report_platform.o obj-y += sata.o obj-y += sdram.o endif +obj-y += bd82x6x.o
arch/x86/cpu/ivybridge/bd82x6x.c +4 -0
@@ -22,6 +22,7 @@#define GPIO_BASE 0x48#define BIOS_CTRL 0xdc +#ifndef CONFIG_HAVE_FSP static int pch_revision_id =-1 ;static int pch_type =-1 ;
@@ -170,6 +171,7 @@ static int bd82x6x_probe(struct udevice *dev) return 0; } +#endif /* CONFIG_HAVE_FSP */ static int bd82x6x_pch_get_spi_base (struct udevice *dev,ulong *sbasep) {
@@ -247,6 +249,8 @@ U_BOOT_DRIVER(bd82x6x_drv) = { .name = "bd82x6x", .id = UCLASS_PCH, .of_match = bd82x6x_ids, +#ifndef CONFIG_HAVE_FSP .probe = bd82x6x_probe, +#endif .ops = &bd82x6x_pch_ops, };
Signature · 1 line
1.8.2.1
PATCH v2 4/5 x86: ivybridge: bd82x6x: Support FSP enabled configuration
Quoted 11 lines · Bin Meng
Wrap initialization codes with #ifndef
CONFIG_HAVE_FSP#endif, and enable the build for both FSP and non-FSP configurations.Signed-off-by Bin Meng <[email protected]>---
Changes in v2: None
arch/x86/cpu/ivybridge/Makefile | 2 +- arch/x86/cpu/ivybridge/bd82x6x.c | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-)
PATCH v2 5/5 x86: Add Intel Cougar Canyon 2 board
In reply to Bin MengThis adds basic support to Intel Cougar Canyon 2 board, a board based on Chief River platform with an Ivy Bridge processor and a Panther Point chipset.
---
Changes in v2:
- Change include order - <asm/...> go after the normal includes
- Use PCH uclass driver and change to use dm pci config APIs
arch/x86/cpu/ivybridge/Kconfig | 4 ++ arch/x86/dts/Makefile | 1 + arch/x86/dts/cougarcanyon2.dts | 104 ++++++++++++++++++++++++++++++ board/intel/Kconfig | 9 +++ board/intel/cougarcanyon2/Kconfig | 25 +++++++ board/intel/cougarcanyon2/MAINTAINERS | 6 ++ board/intel/cougarcanyon2/Makefile | 7 ++ board/intel/cougarcanyon2/cougarcanyon2.c | 58 +++++++++++++++++ board/intel/cougarcanyon2/start.S | 9 +++ configs/cougarcanyon2_defconfig | 21 ++++++ include/configs/cougarcanyon2.h | 34 ++++++++++ 11 files changed, 278 insertions(+) create mode 100644 arch/x86/dts/cougarcanyon2.dts create mode 100644 board/intel/cougarcanyon2/Kconfig create mode 100644 board/intel/cougarcanyon2/MAINTAINERS create mode 100644 board/intel/cougarcanyon2/Makefile create mode 100644 board/intel/cougarcanyon2/cougarcanyon2.c create mode 100644 board/intel/cougarcanyon2/start.S create mode 100644 configs/cougarcanyon2_defconfig create mode 100644 include/configs/cougarcanyon2.h
arch/x86/cpu/ivybridge/Kconfig +4 -0
@@ -79,4 +79,8 @@ config FSP_USE_UPD bool default n +config FSP_BROKEN_HOB + bool + default y + endif
arch/x86/dts/Makefile +1 -0
@@ -5,6 +5,7 @@ dtb-y += bayleybay.dtb \ chromebook_link.dtb \ chromebox_panther.dtb \ + cougarcanyon2.dtb \ crownbay.dtb \ efi.dtb \ galileo.dtb \
arch/x86/dts/cougarcanyon2.dts new file +104 -0
104 lines not on this page · raw message
board/intel/Kconfig +9 -0
@@ -18,6 +18,14 @@ config TARGET_BAYLEYBAY 4GB memory, HDMI/DP/VGA display, HD audio, SATA, USB2, USB3, SD, eMMC, PCIe and some other sensor interfaces. +config TARGET_COUGARCANYON2 + bool "Cougar Canyon 2" + help + This is the Intel Cougar Canyon 2 Customer Reference Board. It + is built on the Chief River platform with Intel Ivybridge Processor + and Panther Point chipset. The board has 4GB RAM, with some other + peripheral connectors for PCIe/SATA/USB2/USB3/LAN/UART/PS2/VGA/HDMI. + config TARGET_CROWNBAY bool "Crown Bay" help
@@ -54,6 +62,7 @@ config TARGET_MINNOWMAX endchoice source "board/intel/bayleybay/Kconfig" +source "board/intel/cougarcanyon2/Kconfig" source "board/intel/crownbay/Kconfig" source "board/intel/galileo/Kconfig" source "board/intel/minnowmax/Kconfig"
board/intel/cougarcanyon2/Kconfig new file +25 -0
@@ -0,0 +1,25 @@ +if TARGET_COUGARCANYON2 + +config SYS_BOARD + default "cougarcanyon2" + +config SYS_VENDOR + default "intel" + +config SYS_SOC + default "ivybridge" + +config SYS_CONFIG_NAME + default "cougarcanyon2" + +config SYS_TEXT_BASE + default 0xffe00000 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select X86_RESET_VECTOR + select NORTHBRIDGE_INTEL_IVYBRIDGE + select HAVE_FSP + select BOARD_ROMSIZE_KB_2048 + +endif
board/intel/cougarcanyon2/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +INTEL COUGAR CANYON 2 BOARD +M: Bin Meng <[email protected]> +S: Maintained +F: board/intel/cougarcanyon2/ +F: include/configs/cougarcanyon2.h +F: configs/cougarcanyon2_defconfig
board/intel/cougarcanyon2/Makefile new file +7 -0
@@ -0,0 +1,7 @@ +# +# Copyright (C) 2016, Bin Meng <[email protected]> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += cougarcanyon2.o start.o
board/intel/cougarcanyon2/cougarcanyon2.c new file +58 -0
58 lines not on this page · raw message
board/intel/cougarcanyon2/start.S new file +9 -0
@@ -0,0 +1,9 @@ +/* + * Copyright (C) 2016, Bin Meng <[email protected]> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +.globl early_board_init +early_board_init: + jmp early_board_init_ret
configs/cougarcanyon2_defconfig new file +21 -0
@@ -0,0 +1,21 @@ +CONFIG_X86=y +CONFIG_VENDOR_INTEL=y +CONFIG_DEFAULT_DEVICE_TREE="cougarcanyon2" +CONFIG_TARGET_COUGARCANYON2=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set +CONFIG_OF_CONTROL=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_DM_PCI=y +CONFIG_DM_RTC=y +CONFIG_SYS_NS16550=y +CONFIG_ICH_SPI=y +CONFIG_TIMER=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y +CONFIG_SYS_VSNPRINTF=y
include/configs/cougarcanyon2.h new file +34 -0
@@ -0,0 +1,34 @@ +/* +* Copyright (C) 2016, Bin Meng <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <configs/x86-common.h> + +#define CONFIG_SYS_MONITOR_LEN (2 << 20) +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_SMSC_SIO1007 + +#define CONFIG_PCI_PNP + +#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial,i8042-kbd,usbkbd\0" \ + "stdout=serial,vga\0" \ + "stderr=serial,vga\0" + +#define CONFIG_SCSI_DEV_LIST \ + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE} + +/* Environment configuration */ +#define CONFIG_ENV_SECT_SIZE 0x1000 +#define CONFIG_ENV_OFFSET 0x5ff000 + +/* Video is not supported for now */ +#undef CONFIG_VIDEO +#undef CONFIG_CFB_CONSOLE + +#endif /* __CONFIG_H */
Signature · 1 line
1.8.2.1
PATCH v2 5/5 x86: Add Intel Cougar Canyon 2 board
Hi Bin,
Quoted 25 lines · Bin Meng
This adds basic support to Intel Cougar Canyon 2 board, a board based on Chief River platform with an Ivy Bridge processor and a Panther Point chipset.
Signed-off-by Bin Meng <[email protected]>Acked-by Simon Glass <[email protected]>---
Changes in v2:
- Change include order - <asm/...> go after the normal includes
- Use PCH uclass driver and change to use dm pci config APIsarch/x86/cpu/ivybridge/Kconfig | 4 ++ arch/x86/dts/Makefile | 1 + arch/x86/dts/cougarcanyon2.dts | 104 ++++++++++++++++++++++++++++++ board/intel/Kconfig | 9 +++ board/intel/cougarcanyon2/Kconfig | 25 +++++++ board/intel/cougarcanyon2/MAINTAINERS | 6 ++ board/intel/cougarcanyon2/Makefile | 7 ++ board/intel/cougarcanyon2/cougarcanyon2.c | 58 +++++++++++++++++ board/intel/cougarcanyon2/start.S | 9 +++ configs/cougarcanyon2_defconfig | 21 ++++++ include/configs/cougarcanyon2.h | 34 ++++++++++ 11 files changed, 278 insertions(+)
Quoted 8 lines
create mode 100644 arch/x86/dts/cougarcanyon2.dts create mode 100644 board/intel/cougarcanyon2/Kconfig create mode 100644 board/intel/cougarcanyon2/MAINTAINERS create mode 100644 board/intel/cougarcanyon2/Makefile create mode 100644 board/intel/cougarcanyon2/cougarcanyon2.c create mode 100644 board/intel/cougarcanyon2/start.S create mode 100644 configs/cougarcanyon2_defconfig create mode 100644 include/configs/cougarcanyon2.h
Can you update README.x86 to mention this board and how to get the required binaries?
Regards,
Simon
PATCH v2 5/5 x86: Add Intel Cougar Canyon 2 board
Hi Simon,
Quoted 37 lines · Simon Glass
Hi Bin,
Quoted 25 lines · Bin Meng
This adds basic support to Intel Cougar Canyon 2 board, a board based on Chief River platform with an Ivy Bridge processor and a Panther Point chipset.
Signed-off-by Bin Meng <[email protected]>Acked-by Simon Glass <[email protected]>---
Changes in v2:
- Change include order - <asm/...> go after the normal includes
- Use PCH uclass driver and change to use dm pci config APIsarch/x86/cpu/ivybridge/Kconfig | 4 ++ arch/x86/dts/Makefile | 1 + arch/x86/dts/cougarcanyon2.dts | 104 ++++++++++++++++++++++++++++++ board/intel/Kconfig | 9 +++ board/intel/cougarcanyon2/Kconfig | 25 +++++++ board/intel/cougarcanyon2/MAINTAINERS | 6 ++ board/intel/cougarcanyon2/Makefile | 7 ++ board/intel/cougarcanyon2/cougarcanyon2.c | 58 +++++++++++++++++ board/intel/cougarcanyon2/start.S | 9 +++ configs/cougarcanyon2_defconfig | 21 ++++++ include/configs/cougarcanyon2.h | 34 ++++++++++ 11 files changed, 278 insertions(+)Quoted 8 lines
create mode 100644 arch/x86/dts/cougarcanyon2.dts create mode 100644 board/intel/cougarcanyon2/Kconfig create mode 100644 board/intel/cougarcanyon2/MAINTAINERS create mode 100644 board/intel/cougarcanyon2/Makefile create mode 100644 board/intel/cougarcanyon2/cougarcanyon2.c create mode 100644 board/intel/cougarcanyon2/start.S create mode 100644 configs/cougarcanyon2_defconfig create mode 100644 include/configs/cougarcanyon2.h
Quoted 3 lines
Can you update README.x86 to mention this board and how to get the required binaries?
Sure, will do in v3.
Regards,
Bin