Skip to contentSkip to conversation

Staging:wlan-ng:Merged two lines into one

PATCH In review Bhumika Goyal 3 participants 13 messages Feb 8, 2016 – Feb 9, 2016 Staging

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Staging:wlan-ng:Merged two lines into one

The last two lines of these functions are compressed into one. Also removed the variable ret as it is now not used. Found using coccinelle:
@@
expression e, ret;
@@

-ret =
+return

     e;

-return ret;

---
 drivers/staging/wlan-ng/hfa384x_usb.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)
drivers/staging/wlan-ng/hfa384x_usb.c +4 -16
index 682de77..fda8a95 100644
@@ -1012,7 +1012,6 @@ int hfa384x_cmd_initialize(hfa384x_t *hw)
 ----------------------------------------------------------------*/
 int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_DISABLE) |
@@ -1021,9 +1020,7 @@ int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
 	cmd.parm1 = 0;
 	cmd.parm2 = 0;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
@@ -1048,7 +1045,6 @@ int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
 ----------------------------------------------------------------*/
 int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_ENABLE) |
@@ -1057,9 +1053,7 @@ int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
 	cmd.parm1 = 0;
 	cmd.parm2 = 0;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
@@ -1093,7 +1087,6 @@ int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
 ----------------------------------------------------------------*/
 int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_MONITOR) |
@@ -1102,9 +1095,7 @@ int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
 	cmd.parm1 = 0;
 	cmd.parm2 = 0;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
@@ -1148,7 +1139,6 @@ int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
 int hfa384x_cmd_download(hfa384x_t *hw, u16 mode, u16 lowaddr,
 			 u16 highaddr, u16 codelen)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	pr_debug("mode=%d, lowaddr=0x%04x, highaddr=0x%04x, codelen=%d\n",
@@ -1161,9 +1151,7 @@ int hfa384x_cmd_download(hfa384x_t *hw, u16 mode, u16 lowaddr,
 	cmd.parm1 = highaddr;
 	cmd.parm2 = codelen;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
Signature · 1 line
1.9.1
maintainer
#1 lore raw
Quoted 12 lines · Bhumika Goyal

The last two lines of these functions are compressed into one. Also removed the variable ret as it is now not used. Found using coccinelle:
@@
expression e, ret;
@@

(quoted diff) +1 -2
-ret =
+return
     e;
-return ret;
Quoted 4 lines
---
 drivers/staging/wlan-ng/hfa384x_usb.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)

We do not accept patches on the outreachy-kernel mailing list yet, please submit these the "normal way" in order for them to be accepted to the kernel community.

thanks,

greg k-h

#2 lore raw

Thanks Greg. May I know when can I start submitting patches on the outreachy-kernel list.

Thanks,
Bhumika Goyal

maintainer
#3 lore raw
Quoted 2 lines · Bhumika Goyal

Thanks Greg. May I know when can I start submitting patches on the outreachy-kernel list.

It seems that the application process starts tomorrow, but I haven't seen an announcement about it to know for sure that is the date, sorry.

greg k-h

#4 lore raw
In reply to Greg KH
Quoted 13 lines · Greg KH
Quoted 12 lines · Bhumika Goyal

The last two lines of these functions are compressed into one. Also removed the variable ret as it is now not used. Found using coccinelle:
@@
expression e, ret;
@@

(quoted diff) +1 -2
-ret =
+return
     e;
-return ret;
Quoted 8 lines
Quoted 4 lines
---
 drivers/staging/wlan-ng/hfa384x_usb.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)

We do not accept patches on the outreachy-kernel mailing list yet, please submit these the "normal way" in order for them to be accepted to the kernel community.

Actually, it seems that it is already February 9 in her location :)

julia

Quoted 12 lines

thanks,

greg k-h

Signature · 5 lines
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20160208193922.GA10743%40kroah.com.
For more options, visit https://groups.google.com/d/optout.
maintainer
#5 lore raw
Quoted 24 lines · Julia Lawall
Quoted 13 lines · Greg KH
Quoted 12 lines · Bhumika Goyal

The last two lines of these functions are compressed into one. Also removed the variable ret as it is now not used. Found using coccinelle:
@@
expression e, ret;
@@

(quoted diff) +1 -2
-ret =
+return
     e;
-return ret;
Quoted 8 lines
Quoted 4 lines
---
 drivers/staging/wlan-ng/hfa384x_usb.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)

We do not accept patches on the outreachy-kernel mailing list yet, please submit these the "normal way" in order for them to be accepted to the kernel community.

Quoted 1 line

Actually, it seems that it is already February 9 in her location :)

Ugh, you are right, my apologies.

greg k-h

Acked-by on v1 1/1
#6 lore raw
In reply to Bhumika Goyal

The subject line should have a space after each :. You can see this by doing

git log --oneline drivers/staging/wlan-ng/hfa384x_usb.c

Your subject line should look exactly like the ones there.

Also, the subject line should be in the imperative. Thus Merge two lines... instead of Merged two lines...

Otherwise the change looks good. Please send a v2 with an improved subject line and:

julia

Quoted 107 lines · Bhumika Goyal

The last two lines of these functions are compressed into one. Also removed the variable ret as it is now not used. Found using coccinelle:
@@
expression e, ret;
@@

(quoted diff) +1 -2
-ret =
+return
     e;
-return ret;
---
 drivers/staging/wlan-ng/hfa384x_usb.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)
drivers/staging/wlan-ng/hfa384x_usb.c +4 -16
index 682de77..fda8a95 100644
@@ -1012,7 +1012,6 @@ int hfa384x_cmd_initialize(hfa384x_t *hw)
 ----------------------------------------------------------------*/
 int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_DISABLE) |
@@ -1021,9 +1020,7 @@ int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
 	cmd.parm1 = 0;
 	cmd.parm2 = 0;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
@@ -1048,7 +1045,6 @@ int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
 ----------------------------------------------------------------*/
 int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_ENABLE) |
@@ -1057,9 +1053,7 @@ int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
 	cmd.parm1 = 0;
 	cmd.parm2 = 0;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
@@ -1093,7 +1087,6 @@ int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
 ----------------------------------------------------------------*/
 int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_MONITOR) |
@@ -1102,9 +1095,7 @@ int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
 	cmd.parm1 = 0;
 	cmd.parm2 = 0;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
@@ -1148,7 +1139,6 @@ int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
 int hfa384x_cmd_download(hfa384x_t *hw, u16 mode, u16 lowaddr,
 			 u16 highaddr, u16 codelen)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	pr_debug("mode=%d, lowaddr=0x%04x, highaddr=0x%04x, codelen=%d\n",
@@ -1161,9 +1151,7 @@ int hfa384x_cmd_download(hfa384x_t *hw, u16 mode, u16 lowaddr,
 	cmd.parm1 = highaddr;
 	cmd.parm2 = codelen;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
Signature · 8 lines
1.9.1

-- 
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/1454959731-21240-1-git-send-email-bhumirks%40gmail.com.
For more options, visit https://groups.google.com/d/optout.
#7 lore raw

PATCH v2 1/1 Staging: wlan-ng: Merge two lines into one

In reply to Bhumika Goyal

The last two lines of these functions are compressed into one. Also removed the variable ret as it is now not used. Found using coccinelle:
@@
expression e, ret;
@@

-ret =
+return

     e;

-return ret;

---
Changes since v1:
* Improve subject line.

---
 drivers/staging/wlan-ng/hfa384x_usb.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)
drivers/staging/wlan-ng/hfa384x_usb.c +4 -16
index 682de77..fda8a95 100644
@@ -1012,7 +1012,6 @@ int hfa384x_cmd_initialize(hfa384x_t *hw)
 ----------------------------------------------------------------*/
 int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_DISABLE) |
@@ -1021,9 +1020,7 @@ int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
 	cmd.parm1 = 0;
 	cmd.parm2 = 0;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
@@ -1048,7 +1045,6 @@ int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
 ----------------------------------------------------------------*/
 int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_ENABLE) |
@@ -1057,9 +1053,7 @@ int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
 	cmd.parm1 = 0;
 	cmd.parm2 = 0;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
@@ -1093,7 +1087,6 @@ int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
 ----------------------------------------------------------------*/
 int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_MONITOR) |
@@ -1102,9 +1095,7 @@ int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
 	cmd.parm1 = 0;
 	cmd.parm2 = 0;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
@@ -1148,7 +1139,6 @@ int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
 int hfa384x_cmd_download(hfa384x_t *hw, u16 mode, u16 lowaddr,
 			 u16 highaddr, u16 codelen)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	pr_debug("mode=%d, lowaddr=0x%04x, highaddr=0x%04x, codelen=%d\n",
@@ -1161,9 +1151,7 @@ int hfa384x_cmd_download(hfa384x_t *hw, u16 mode, u16 lowaddr,
 	cmd.parm1 = highaddr;
 	cmd.parm2 = codelen;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
Signature · 1 line
1.9.1
#8 lore raw

Re: [Outreachy kernel] [PATCH v2] Staging: wlan-ng: Merge two lines into one

Quoted 12 lines · Bhumika Goyal

The last two lines of these functions are compressed into one. Also removed the variable ret as it is now not used. Found using coccinelle:
@@
expression e, ret;
@@

(quoted diff) +1 -2
-ret =
+return
     e;
-return ret;
Quoted 1 line

I think I acked this? You should keep the ack.

The subject line is now good.

julia

Quoted 97 lines

---
Changes since v1:
* Improve subject line.

---
 drivers/staging/wlan-ng/hfa384x_usb.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)
drivers/staging/wlan-ng/hfa384x_usb.c +4 -17
index 682de77..fda8a95 100644
@@ -1012,7 +1012,6 @@ int hfa384x_cmd_initialize(hfa384x_t *hw)
 ----------------------------------------------------------------*/
 int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_DISABLE) |
@@ -1021,9 +1020,7 @@ int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
 	cmd.parm1 = 0;
 	cmd.parm2 = 0;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
@@ -1048,7 +1045,6 @@ int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
 ----------------------------------------------------------------*/
 int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_ENABLE) |
@@ -1057,9 +1053,7 @@ int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
 	cmd.parm1 = 0;
 	cmd.parm2 = 0;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
@@ -1093,7 +1087,6 @@ int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
 ----------------------------------------------------------------*/
 int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_MONITOR) |
@@ -1102,9 +1095,7 @@ int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
 	cmd.parm1 = 0;
 	cmd.parm2 = 0;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
@@ -1148,7 +1139,6 @@ int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
 int hfa384x_cmd_download(hfa384x_t *hw, u16 mode, u16 lowaddr,
 			 u16 highaddr, u16 codelen)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	pr_debug("mode=%d, lowaddr=0x%04x, highaddr=0x%04x, codelen=%d\n",
@@ -1161,9 +1151,7 @@ int hfa384x_cmd_download(hfa384x_t *hw, u16 mode, u16 lowaddr,
 	cmd.parm1 = highaddr;
 	cmd.parm2 = codelen;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
--

1.9.1

--
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/1455010952-24672-1-git-send-email-bhumirks%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

#9 lore raw

Re: [Outreachy kernel] [PATCH v2] Staging: wlan-ng: Merge two lines into one

I am sorry I forgot to keep ack. Should I send v3 with added ack?

Thanks,
Bhumika

#10 lore raw

Re: [Outreachy kernel] [PATCH v2] Staging: wlan-ng: Merge two lines into one

Quoted 1 line · Bhumika Goyal

I am sorry I forgot to keep ack. Should I send v3 with added ack?

Yes.

julia

Quoted 15 lines

Thanks,
Bhumika

--
You received this message because you are subscribed to the Google Groups
"outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visithttps://groups.google.com/d/msgid/outreachy-kernel/27fd7003-b4a6-4b3f-b93b- f19c3b310b1a%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

#11 lore raw

PATCH v3 1/1 Staging: wlan-ng: Merge two lines into one

In reply to Bhumika Goyal

The last two lines of these functions are compressed into one. Also removed the variable result as it is now not used. Found using coccinelle:
@@
expression e, ret;
@@

-ret =
+return

     e;

-return ret;

---
Changes since v1:
* Improve subject line.
Changes since v2:
* Add acknowledgement.

---
 drivers/staging/wlan-ng/hfa384x_usb.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)
drivers/staging/wlan-ng/hfa384x_usb.c +4 -16
index 682de77..fda8a95 100644
@@ -1012,7 +1012,6 @@ int hfa384x_cmd_initialize(hfa384x_t *hw)
 ----------------------------------------------------------------*/
 int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_DISABLE) |
@@ -1021,9 +1020,7 @@ int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
 	cmd.parm1 = 0;
 	cmd.parm2 = 0;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
@@ -1048,7 +1045,6 @@ int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
 ----------------------------------------------------------------*/
 int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_ENABLE) |
@@ -1057,9 +1053,7 @@ int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
 	cmd.parm1 = 0;
 	cmd.parm2 = 0;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
@@ -1093,7 +1087,6 @@ int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
 ----------------------------------------------------------------*/
 int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_MONITOR) |
@@ -1102,9 +1095,7 @@ int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
 	cmd.parm1 = 0;
 	cmd.parm2 = 0;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
@@ -1148,7 +1139,6 @@ int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
 int hfa384x_cmd_download(hfa384x_t *hw, u16 mode, u16 lowaddr,
 			 u16 highaddr, u16 codelen)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	pr_debug("mode=%d, lowaddr=0x%04x, highaddr=0x%04x, codelen=%d\n",
@@ -1161,9 +1151,7 @@ int hfa384x_cmd_download(hfa384x_t *hw, u16 mode, u16 lowaddr,
 	cmd.parm1 = highaddr;
 	cmd.parm2 = codelen;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
Signature · 1 line
1.9.1
#12 lore raw

Re: [Outreachy kernel] [PATCH v3] Staging: wlan-ng: Merge two lines into one

Quoted 12 lines · Bhumika Goyal

The last two lines of these functions are compressed into one. Also removed the variable result as it is now not used. Found using coccinelle:
@@
expression e, ret;
@@

(quoted diff) +1 -2
-ret =
+return
     e;
-return ret;
Quoted 2 lines

Where did the ... come from? At least in the web interface to the outreachy mailing list, everything is there. It should be the exact email address.

julia

Quoted 99 lines

---
Changes since v1:
* Improve subject line.
Changes since v2:
* Add acknowledgement.

---
 drivers/staging/wlan-ng/hfa384x_usb.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)
drivers/staging/wlan-ng/hfa384x_usb.c +4 -17
index 682de77..fda8a95 100644
@@ -1012,7 +1012,6 @@ int hfa384x_cmd_initialize(hfa384x_t *hw)
 ----------------------------------------------------------------*/
 int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_DISABLE) |
@@ -1021,9 +1020,7 @@ int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
 	cmd.parm1 = 0;
 	cmd.parm2 = 0;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
@@ -1048,7 +1045,6 @@ int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
 ----------------------------------------------------------------*/
 int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_ENABLE) |
@@ -1057,9 +1053,7 @@ int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
 	cmd.parm1 = 0;
 	cmd.parm2 = 0;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
@@ -1093,7 +1087,6 @@ int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
 ----------------------------------------------------------------*/
 int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_MONITOR) |
@@ -1102,9 +1095,7 @@ int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
 	cmd.parm1 = 0;
 	cmd.parm2 = 0;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
@@ -1148,7 +1139,6 @@ int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
 int hfa384x_cmd_download(hfa384x_t *hw, u16 mode, u16 lowaddr,
 			 u16 highaddr, u16 codelen)
 {
-	int result = 0;
 	hfa384x_metacmd_t cmd;
 
 	pr_debug("mode=%d, lowaddr=0x%04x, highaddr=0x%04x, codelen=%d\n",
@@ -1161,9 +1151,7 @@ int hfa384x_cmd_download(hfa384x_t *hw, u16 mode, u16 lowaddr,
 	cmd.parm1 = highaddr;
 	cmd.parm2 = codelen;
 
-	result = hfa384x_docmd_wait(hw, &cmd);
-
-	return result;
+	return hfa384x_docmd_wait(hw, &cmd);
 }
 
 /*----------------------------------------------------------------
--

1.9.1

--
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/1455019592-29178-1-git-send-email-bhumirks%40gmail.com.
For more options, visit https://groups.google.com/d/optout.